Information about versions:


NAV SERVER:

root@nav:~# /usr/lib/nav/ipdevpolld --version
NAV 3.13.1

root@nav:~# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 6.0.7 (squeeze)
Release:        6.0.7
Codename:       squeeze


DEVICE:

Device Type         : DGS-3100-48 Gigabit stackable L2 Managed Switch
MAC Address         : f0:7d:68:b5:58:77
IP Address          : 10.10.25.110
VLAN Name           : v25Manager
Subnet Mask         : 255.255.255.0
Default Gateway     : 10.10.25.1
Boot PROM Version   : 1.0.1.05
Firmware Version    : 3.60.28
Hardware Version    : a2
Serial Number       : F3XT1A7000009(unit 1)
                      F3XT1A7000008(unit 2)
                      F3XU1AC000016(unit 3)
System Name         : [110-4]
System Location     : 
System Contact      : 
System Up Time      : 56 days 7 hours 5 mins 47 seconds
Spanning Tree       : Enabled
GVRP                : Disabled
IGMP Snooping       : Enabled
TELNET              : Disabled
WEB                 : Disabled





2013/3/19 Bruno Galindro da Costa <bruno.galindro@gmail.com>
Hi! 

   Is Dlink DGS-3100 / DGS-3120 supported by NAV? If yes, why these errors are ocurring with ipdevpoll module?

2013-03-19 19:52:09,257 [WARNING plugins.typeoid.typeoid] [inventory 10.10.25.110] Netbox has changed type from unknown to unknown (sysObjectID 1.3.6.1.4.1.171.10.94.3)
2013-03-19 19:52:30,376 [ERROR jobs.jobhandler] [inventory 10.10.25.110  Job 'inventory' for 10.10.25.110 aborted: ('Job aborted due to plugin failure', TimeoutError('',))
2013-03-19 19:54:49,507 [ERROR jobs.jobhandler] [linkcheck 10.10.25.110] Job 'linkcheck' for 10.10.25.110 aborted: ('Job aborted due to plugin failure', TimeoutError('',))

   Is there a way to put ipdevpoll module in debug mode to see what is happening with more details?

   The device is correctly configured with snmpv2c. See it:

# snmpwalk -v2c -c public 10.10.25.110 .1.3.6.1.2.1.2.2.1.2.40
iso.3.6.1.2.1.2.2.1.2.40 = STRING: "Ethernet Interface"

   That command was executed from the same VM that NAV is installed.


I have another two monitored devices: Dlink DES-3028P and Dlink DES-3526. These two are correctly functional in NAV and those snmp configurations are set in the same way of Dlink DGS-3100.



--
Att.
Bruno Galindro da Costa



--
Att.
Bruno Galindro da Costa