In my nav3beta10 (debian) every switch shows vlan information on ports, except on my two cisco 2980. model descr serial sw_ver hw_ver fw_ver WS-X2980GBRJ WS-X2980RJ 10/100BaseTx Ethernet Rev. 2.0 JAB05250BZH 5.5(18) 2.0 5.4(1) model descr serial sw_ver hw_ver fw_ver WS-X2980GBRJ WS-X2980GBRJ 10/100/1000 Ethernet Rev. 1.2 JAB061906WQ 6.3(5) 1.2 6.1(4) They are running CatOS, but my 5500 is also running CatOS and he is showing vlan information. This is the information from the web-page /report/swport?b1.netboxid=38 interface module port link Mbps duplex media trunk vlan portname 2/17 2 17 y 100.0 h 0 UPS-Strom snmp But the vlan information is collected, and I can find it tabell swport swportid | moduleid | ifindex | port | interface | link | speed | duplex | media | vlan | trunk | portname | to_netboxid | to_swportid ----------+----------+---------+------+-----------+------+-------+--------+-------+------+-------+----------------+-------------+------------- 12069 | 824 | 25 | 17 | 2/17 | y | 100 | h | | 10 | f | UPS-Strom snmp | | Any ideas? Peder Sefland

...

...

"Fredrik Holmberg" <fredrik.holmberg@luh.hihm.no> 15.02.2005 10:17:54 >>> NAV Beta 10: nav3:/usr/local/nav/etc/report # diff report.conf report.conf.old 432c432 < $sql="SELECT b1.sysname,s1.interface, m1.module, s1.port, s1.link, s1.speed, s1.duplex, s1.media, s1.trunk, vlan.vlan,s1.portname, b2.sysname as to_netboxid,m2.module AS remote_module, s1.swportid, b1.netboxid as netboxid, b1.catid FROM swport AS s1 JOIN module AS m1 USING (moduleid) JOIN netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON (s1.swportid=swportvlan.swportid AND trunk='f') left join vlan using(vlan) LEFT JOIN swport AS s2 ON (s1.to_swportid=s2.swportid) LEFT JOIN module AS m2 ON (s2.moduleid=m2.moduleid)";

$sql="SELECT b1.sysname,s1.interface, m1.module, s1.port, s1.link, s1.speed, s1.duplex, s1.media, s1.trunk, vlan.vlan,s1.portname, b2.sysname as to_netboxid,m2.module AS remote_module, s1.swportid, b1.netboxid as netboxid, b1.catid FROM swport AS s1 JOIN module AS m1 USING (moduleid) JOIN netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON (s1.swportid=swportvlan.swportid AND trunk='f') left join vlan using(vlanid) LEFT JOIN swport AS s2 ON (s1.to_swportid=s2.swportid) LEFT JOIN module AS m2 ON (s2.moduleid=m2.moduleid)";

Maybe this sorts it out :) - Fredrik -----Original Message----- From: nav-users-bounces@itea.ntnu.no [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Wojciech Kozicki Sent: Tuesday, February 15, 2005 10:09 AM To: nav-users@desperados.itea.ntnu.no Subject: Re: [Nav-users] vlan information from cisco switches Dnia wtorek, 15 lutego 2005 10:03, Fredrik Holmberg napisa*:

Are you referring to "Report"? It doesn't show VLAN when you view the switchports?

Yes, I meant "report"...

If this is the case, I might have a "fix" for you..

:) best regards -- Wojciech (Woj) Kozicki _______________________________________________ Nav-users mailing list Nav-users@itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users _______________________________________________ Nav-users mailing list Nav-users@itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users