I am running version 4-0-216-0.
- odd arne hauge
-----Original Message----- From: Vidar Stokke [mailto:vidar.stokke@ntnu.no] Sent: Friday, April 13, 2007 3:57 PM To: Hauge Odd Arne Cc: Morten Brekkevold; nav-users@itea.ntnu.no Subject: Re: [Nav-users] Cisco Wireless Lan Controller and NAV
Hauge Odd Arne wrote:
When I do a snmpwalk I get the following result: snmpwalk -v2c -On lan-controllers ip -c community system
.1.3.6.1.2.1.1.1.0 = STRING: Cisco Controller .1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.14179.1.1.4.3
Without the -On option: snmpwalk -v2c lan-controllers ip -c community system SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.14179.1.1.4.3
So it seems to me that NAV is the problem not the controller.
- odd arne hauge
I did the same thing towards one of our controllers:
snmpwalk -v2c -On lan-controllers ip -c community system
.1.3.6.1.2.1.1.1.0 = STRING: Cisco Controller .1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.14179.1.1.4.4 .1.3.6.1.2.1.1.3.0 = Timeticks: (386918800) 44 days, 18:46:28.00 .1.3.6.1.2.1.1.4.0 = STRING: .1.3.6.1.2.1.1.5.0 = STRING: wlan_gsw_wism_1_2 .1.3.6.1.2.1.1.6.0 = STRING: .1.3.6.1.2.1.1.7.0 = INTEGER: 2
snmpwalk -v2c -On lan-controllers ip -c community system
SNMPv2-MIB::sysDescr.0 = STRING: Cisco Controller SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.14179.1.1.4.4 SNMPv2-MIB::sysUpTime.0 = Timeticks: (386927900) 44 days, 18:47:59.00 SNMPv2-MIB::sysContact.0 = STRING: SNMPv2-MIB::sysName.0 = STRING: wlan_gsw_wism_1_2 SNMPv2-MIB::sysLocation.0 = STRING: SNMPv2-MIB::sysServices.0 = INTEGER: 2
What version of software are you running on your controllers?
-- Regards Vidar Stokke NTNU, ITEA, Networking
-----Original Message----- From: Morten Brekkevold [mailto:morten.brekkevold@uninett.no] Sent: Friday, April 13, 2007 11:09 AM To: Hauge Odd Arne Cc: nav-users@itea.ntnu.no Subject: Re: [Nav-users] Cisco Wireless Lan Controller and NAV
Hauge Odd Arne wrote, On 02-04-2007 15:52:
Hi.
Has NAV any support for Cisco Wireless Lan Controller 440x ? Trying to add my own device using editDb gives following output:
[...]
Snmp error 2 at 1 (.1.3.6.1.2.1.1.2.0, NULL: )
This is NAV's somewhat cryptic way of telling you that the remote SNMP agent doesn't know the OID. (The code was recently changed to give a more friendly error message in this case, and it will be in place for NAV 3.3).
The OID in this case is sysObjectID.0; if your Cisco Wireless Lan Controller 440x reports a noSuchName error for this OID, then I'd say something is seriously wrong with your controller.
NTNU reports that they have added a Cisco WLAN controller to their NAV with no problems, so I'm not sure what causes your problem.
As to your question of "any support for" the Cisco WLAN Controller 440x, the answer is yes. I.e., it is an IP device, and can be status monitored by NAV. The box should support SNMP (although something about that seems broken in your case), so you will be able to retrieve some basic SNMP data from it. But that is all.
When it comes to actually retrieving info about the slaves controlled by the box, NAV has no idea. We are working on better support for autonomous Cisco WLAN AP's this year, in fact Andreas Knudsen from the University College of ?stfold is coming up here next week to work on this support. Unfortunately, we have no current plans of supporting the special case of a Cisco WLAN Controller, as we currently haven't enough resources to work on it. We are aware, though, that they are growing more popular and should be supported, but we have no idea yet how they can best be supported by NAV, and not sure how the controller/slave concept maps into NAV's existing data model. Whoever is going to work out some support for this box, must have access to one and the proper Cisco documentation for it.
-- mvh Morten Brekkevold UNINETT
nav-users mailing list nav-users@itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users