As you can see, there is that none statement - and it should be some local interface. Also I attached a picture of directly connected neighbors - there are really a lot of them, but it detected only 3 of them.
All the snapshots are for one switch - switchA. CDP is running on every switch and it reports neighbors correctly.
Any idea, what is wrong?
Mat
-----Original Message----- From: Morten Brekkevold [mailto:morten.brekkevold@uninett.no] Sent: Monday, April 07, 2014 3:11 PM To: JABUREK Martin Cc: nav-users@uninett.no Subject: Re: Problem with uplink detecion
On Thu, 27 Mar 2014 14:38:36 +0000 "Martin.Jaburek@cah.cz" Martin.Jaburek@cah.cz wrote:
I just face another problém with uplink detection. I tried to follow documentation about troubleshooting topology, but it yielded no results.
I check switchport report of both connected devices and there it is showed in the columnt labeled as connected to.
I also check cdp and it also report it correctly.
I'm sorry, but I'm failing to understand what your exact problem is, based on this description. Could you be more specific, please?
I also found another problém when it displays an actual uplink, but with empty from device (which seems to me quite strange). In other case an uplink is showed only on one device but not the other.
Where are you looking? /ipdevinfo? Can you provide a screenshot?
Is there any limit about number of uplinks? (I have more then ten uplinks on one box)
No.
-- Morten Brekkevold UNINETT