September 2009 - Nav-users

EdgeCore ES4612 no port info
by Kostua 15 Okt '09

15 Okt '09

Hello nav users! When adding a new device EdgeCore ES4612 not provide information about activity at the ports. At Home > Reports > Switch ports: indicated only ifindex, module and port. via snmp everything looks fine: %snmpwalk -v2c -c some 172.16.2.49 ifSpeed IF-MIB::ifSpeed.1 = Gauge32: 1000000000 IF-MIB::ifSpeed.2 = Gauge32: 1000000000 IF-MIB::ifSpeed.3 = Gauge32: 1000000000 IF-MIB::ifSpeed.4 = Gauge32: 1000000000 IF-MIB::ifSpeed.5 = Gauge32: 1000000000 IF-MIB::ifSpeed.6 = Gauge32: 1000000000 IF-MIB::ifSpeed.7 = Gauge32: 1000000000 IF-MIB::ifSpeed.8 = Gauge32: 1000000000 IF-MIB::ifSpeed.9 = Gauge32: 1000000000 IF-MIB::ifSpeed.10 = Gauge32: 1000000000 IF-MIB::ifSpeed.11 = Gauge32: 1000000000 IF-MIB::ifSpeed.12 = Gauge32: 1000000000 %snmpwalk -v2c -c some 172.16.2.49 ifOperStatus IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.2 = INTEGER: up(1) IF-MIB::ifOperStatus.3 = INTEGER: up(1) IF-MIB::ifOperStatus.4 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.5 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.6 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.7 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.8 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.9 = INTEGER: up(1) IF-MIB::ifOperStatus.10 = INTEGER: up(1) IF-MIB::ifOperStatus.11 = INTEGER: up(1) IF-MIB::ifOperStatus.12 = INTEGER: up(1) IF-MIB::ifOperStatus.19 = INTEGER: up(1) Any idea ?

2 5

Uplink not show ( switches Cisco )
by jean.tomaz.da.silva＠gmail.com 17 Sep '09

17 Sep '09

Hi, Using "IP Device Info" the information about "Uplink" not is appear in the switch's Cisco. So, the tool "NetMap" show switchs like "disconnected". Does you can to help ? Best Regards, Jean Tomaz

2 6

Java Client configuration ( Machine Client )
by jean.tomaz.da.silva＠gmail.com 03 Sep '09

03 Sep '09

Hello, Friends, What is the best configuration of Java Virtual Machine to use in tool NetMap visualization ? Best Regards, Jean Tomaz.

2 1