Nav-users June 2023

nav-users@lister.sikt.no

4 participants
4 discussions

NAV with Cisco 3850
by Mischa Diehm 15 Sep '23

15 Sep '23

Hi, we have a 3850 Stack with 3x ES-C3850-48T-S and 5x WS-C3850-12X48U. When we try to PortAdmin and edit a Port we get (see also attached Jpg): „IP device found but has no type“ Any ideas? Cheers, Mischa -- Mischa Diehm | Network Team (NINS) UniBasel | IT-Services (ITS) Klingebergstr. 70 | CH-4056 Basel Tel. +41 61 267 1574 | https://its.unibas.ch

4 4

VLANs from PaloAlto router ports missing
by Philipp Petermann 03 Jul '23

03 Jul '23

Hi, At our university we use the portadmin "vlan_auth" feature to restrict access to certain VLANs for certain organizations. Now we have the problem that a VLAN that we want to give access to is missing in NAV and we couldn't find a way to just add this VLAN. From what I understand VLANs are added automatically by ipdevpoll from detected router ports. Now the reason for this missing VLAN most probably is the fact that it is routed on a PaloAlto firewall. This firewall exists in NAV as type "Palo Alto Networks PA-5200 (Palo Alto Networks PA-5200 series firewall from PaloAlto)" (sysobjectid 1.3.6.1.4.1.25461.2.3.23) but no router ports are reported (count 0). So my questions at this point are: - Is there a way to manually add VLANs so the can be used by "vlan_auth"? - Is my assumption correct that the VLAN is missing because the PaloAlto router ports are not correctly detected? - Should PaloAlto router ports normally be detected with NAV? - If so, how can I fix this? And if not, is there any workaround available? - Is https://github.com/Uninett/nav/pull/2613 a solution to this? We are currently using NAV 5.5.2 Thanks and best regards, -- Philipp Petermann Universität Basel | ITS | NINS Spitalstrasse 41 | 4056 Basel | Schweiz Tel. +41 61 207 15 74

4 3

update 5.6.1-2
by Marcos Tadeu 23 Jun '23

23 Jun '23

Hello, When I update , the script disable the nav service and saw to update the database manually. What I need to do? tks

2 1

SELECT to verify MAC on VLAN
by Marcos Tadeu 12 Jun '23

12 Jun '23

Hello, I need to verify nine hundred MAC address. These need to appears on interfaces with one especific VLAN ID, on pid or trunk (tag) If appears on one interface without the VLAN, I need to list sysname and port of switch. It is an job to do using an SELECT on the NAV database. Can anyone help me to write the SELECT? Tia, -- Marcos

2 4

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users June 2023