Nav-users September 2013

nav-users@lister.sikt.no

3 participants
5 discussions

Hardware recommendation
by Mischa Diehm 05 Mar '14

05 Mar '14

Hi, first of all welcome to the list! we (UniBasel) use NAV for quite some while now and are very pleased with the possibilities NAV gives us. We use Debian as OS with the following Setup: root@urz-nav:~# uname -a Linux urz-nav 2.6.32-5-amd64 #1 SMP Fri May 10 09:44:53 UTC 2013 x86_64 GNU/Linux root@urz-nav:~# cat /etc/debian_version 6.0.7 root@urz-nav:~# dpkg -l | grep nav ii nav 2+3.14.15-1 Network Administration Visualized A problem we have since a while is that our system is permanently under a lot of load (mostly CPU bound) and we haven't really found a way to reduce the pressure. The hardware we use is a hp blade (ProLiant BL460c G6) with: Intel(r) Xeon(r) Processor X5550 (4 Cores/ 8 Threats) (8M Cache, 2.66 GHz, 6.40 GT/s Intel(r) QPI) and: root@urz-nav:~# free total used free shared buffers cached Mem: 12321700 11673596 648104 0 387768 9123748 At the moment we have 1460 active Devices (mainly Cisco Switches). Around 30 or 40 are OVERDUE in: https://urz-nav/report/lastupdated So my question is, do you have any good experience with HW-systems that are actually dealing with this amount of devices or is there any tuning possibility (without losing functionality) we could try to reduce the pressure on the system? Thanks in advance, Mischa Diehm -- Mischa Diehm | Network Operation Center (NOC) Universitaet Basel | Universitaetsrechenzentrum Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 61 267 15 74 | Fax +41 61 267 22 82 | http://urz.unibas.ch

5 10

Start automatically NAV services
by Orzakiewicz Cedric 20 Dec '13

20 Dec '13

Hi, Some NAV services don't start automatically (like "ipdevpoll") when my NAV server starts. I have to do it manually with the command "nav start ipdevpoll", and so on for each service not started. Do you know how can I make them start automatically ? Thank you very much :) Cédric.

2 4

Announcement: NAV 3.15.0 released
by Morten Brekkevold 17 Oct '13

17 Oct '13

The initial release of the new NAV 3.15 series is now available for download at Launchpad: https://launchpad.net/nav/3.15/3.15.0 This feature release brings many changes to NAV, including, but not limited to: * mod_python is no longer required; mod_wsgi is the new recommended way to deploy the NAV web interface. * Devices' conceptual layering of interfaces is now collected and presented in ipdevinfo. This enables you to, among other things, see which physical ports comprise a port- or etherchannel. Some vendors also use this to show which physical switch-ports are forwarding packets to/from a given VLAN interface. * The Netmap tool has been redesigned and re-engineered. Multiple improvements have been made based on user feedback. * The Netmap contents can now be exported/downloaded as an SVG file, but this feature is currently only supported by the Google Chrome browser. * Multiple parallel links are now indicated by the Netmap by two parallel black markers drawn across the link in question. Details of the underlying links are are now properly displayed when clicking on the link line. * Interactive next-hop neighbor map in new ipdevinfo tab. * "What-if" analysis in new ipdevinfo tab displays devices and organizations that may be affected if the selected device goes down. Based on NAV's topology information. * Images with descriptions can be uploaded and attached to rooms. Useful for, among other things, photo-documenting the contents of wiring closets. * Subcategories have been replaced by cross-category device groups. Arbitrary selections of IP devices can be organized into device groups. * Potentially out-of-date CAM and ARP records are highlighted in Machine Tracker search results. * Community strings are censored in SeedDB IP Device listing. * New program enables streamlined dumping and reloading, with optional filtering, of the NAV PostgreSQL database. This simplifies beta testing of new NAV versions by copying the production database to a test server. * 26 more metrics from APC UPS devices are now collected and graphed. Fixes for various reported bugs: * LP#1055383 (netmap saves a new view when it should update view) * LP#1057423 (netmap algorithm indicator turns red when clicking on something in left bar) * LP#1062203 (ipdevpoll job configuration description) * LP#1165039 (Selecting a datasource for bulk threshold config intermittently fails with "internal server error") * LP#1169926 (Replace mod_python with Django/WSGI) * LP#1213818 (LDAP authentication crashes on non-ASCII usernames and/or passwords) * LP#1222666 ("Uptime" in ipdevinfo never resets) There are also various dependency changes, documented in the release notes. Please report bugs at https://launchpad.net/nav/+filebug Binary packages for Debian will be made available as soon as possible. The Debian package is maintained by Morten Werner Forsbring, on commission from UNINETT. Happy NAVing everyone! -- Morten Brekkevold UNINETT AS

3 5

Increase rommid column size table room
by Bruno Galindro da Costa 02 Oct '13

02 Oct '13

Morten, I need to add a roomid that has more than 30 chars. I've altered the size of rommid column in table room (at database level), but the HTML fields has a 30 chars limitation. Nav web has built on Django framework which is very nice ;), but I don't know where I can make this modification. *** EXPLANATION: Here at UFSC, we have devices in many places. Bellow has an example of devices physical location: UFSC (Santa Catarina's Federal University) Campus Trindade (City: Florianópolis - SC - Brazil) CCB (Biological's Science Centre) Morfologia (Morphology's Department) Secretaria da Morfologia (Morphology's Department Management Room) Lab. Virtual de Estudos Morfológicos (Virtual Laboratory of Morphological Studies) We have added UFSC as a Parent Organization for Campus Trindade (there are many other campus, but I try to focus only on Trindade): [image: Imagem inline 1] CCB (Biological's Science Centre) was registered as a location: [image: Imagem inline 2] All the other information we are try to register as a room. Here we are experiencing the mentioned limitation problems. We have thought to register these information as a Location, but the Location information isn't displayed at ip device info screen nor at Edit IP Device screen. Unfortunately, this complicates our work. Here is a simple room registry example: CCB_Morfologia_Lab. Virtual de Estudos Morfológicos:CCB::Contato - Gianor - 2320:Na Morfologia/Anatômico, passando a secretaria de morfologia, entre os anfiteatros:::-27.60106, -48.52385 If I try to split "CCB_Morfologia_Lab. Virtual de Estudos Morfológicos" into two fields: (rommid: CCB_Morfologia , description: Lab. Virtual de Estudos Morfológicos) this will cause a contraint violation, because I'll need to add another device that lives in Morphology's Department, but in another place (Morphology's Department Management Room for example). My sugestion is: 1 - add a field called Location in Edit IP Device screen which filters the Room field. 2 - add Location and Parent Organization information at IP Device Info. We can help you and your development team to make these modifications (and maybe others). This could be a nice starting. I hope you understand our necessity and help us to put NAV in production for replace Whatsup Gold. :) -- Att. Bruno Galindro da Costa

2 4

mactracker broken
by Jostein Berge 19 Sep '13

19 Sep '13

Hi We are having som trouble with the ip/mactracker. Running nav on debian 6.0.7, current nav versjon 3.14.1592653. Suspect the problems came a few versions back. Hopefully someone has a suggestion on what could be wrong. If we search for a mac we get the follow error : Environment: Request Method: GET Request URL: http://xxx.karmoy.kommune.no/machinetracker/mac/?mac=000ab7448360&days=7 Django Version: 1.2.3 Python Version: 2.6.6 Installed Applications: ['nav.django'] Installed Middleware: ('django.middleware.common.CommonMiddleware', 'django.contrib.messages.middleware.MessageMiddleware') Traceback: File "/usr/lib/pymodules/python2.6/django/core/handlers/base.py" in get_response 100. response = callback(request, *callback_args, **callback_kwargs) File "/usr/lib/pymodules/python2.6/nav/web/machinetracker/views.py" in mac_search 164. return mac_do_search(request) File "/usr/lib/pymodules/python2.6/nav/web/machinetracker/views.py" in mac_do_search 216. ip_count = len(arp_result) File "/usr/lib/pymodules/python2.6/django/db/models/query.py" in __len__ 81. self._result_cache = list(self.iterator()) File "/usr/lib/pymodules/python2.6/django/db/models/query.py" in iterator 829. for row in self.query.get_compiler(self.db).results_iter(): File "/usr/lib/pymodules/python2.6/django/db/models/sql/compiler.py" in results_iter 672. for rows in self.execute_sql(MULTI): File "/usr/lib/pymodules/python2.6/django/db/models/sql/compiler.py" in execute_sql 727. cursor.execute(sql, params) File "/usr/lib/pymodules/python2.6/django/db/backends/util.py" in execute 15. return self.cursor.execute(sql, params) File "/usr/lib/pymodules/python2.6/django/db/backends/postgresql_psycopg2/base.py" in execute 44. return self.cursor.execute(query, args) Exception Type: DatabaseError at /machinetracker/mac/ Exception Value: function array_agg(character varying) does not exist LINE 1: SELECT (SELECT array_to_string(array_agg(DISTINCT name),', '... ^ HINT: No function matches the given name and argument types. You might need to add explicit type casts. Hilsen Jostein Berge It-konsulent Karmøy Kommune

3 3

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users September 2013