Nav-users Juni 2017

nav-users@lister.sikt.no

5 participants
4 discussions

NAV with Cisco 3850
by Mischa Diehm 15 Sep '23

15 Sep '23

Hi, we have a 3850 Stack with 3x ES-C3850-48T-S and 5x WS-C3850-12X48U. When we try to PortAdmin and edit a Port we get (see also attached Jpg): „IP device found but has no type“ Any ideas? Cheers, Mischa -- Mischa Diehm | Network Team (NINS) UniBasel | IT-Services (ITS) Klingebergstr. 70 | CH-4056 Basel Tel. +41 61 267 1574 | https://its.unibas.ch

4 4

New to NAV, supported devices
by Vinsonnaud Ludovic 07 Des '17

07 Des '17

Hello, Sorry about my english, I'm french so everything may not be understood :-) I'm new to NAV and this software seems very interesting for my needs. I'm managing the network in an Engineer School (IOGS) and CNRS Labs (LCF and LP2N) based in 2 sites (near Paris and near Bordeaux). I've got an heterogeneous group of switches because we begin to change our 100Mb switches by 1Gb and 10Gb ones. For the moment we own : - Dell S4048-ON (force10) used for routing - Dell N2048 - Dell N4064 - Cisco 2960s - Cisco 3750 My switches are recognized pretty well after some tweaking. For Cisco 2960, everything works. Sometimes I've got timeout and "failed" changes so I need to wait before trying again (especialy vlan change). For Cisco 3750, it's the same For Dell N2048, I'm a bit confused because if I have this command "switchport access vlan 524" already set in the switch and I ask to change the vlan from 524 to 525 with NAV, it adds this command "switchport general pvid 525" but doesn't delete the old one. So why change a "switchport access" by a "switchport general" ? Is it better to have a "switchport mode general" in default config ? Switchport mode access is the default mode, the 2 combined commands will not work as intended I think ? I've not yet tested S4048 and N4064. -- Regards, IOGS Logo <https://www.institutoptique.fr> *Ludovic Vinsonnaud * - Ingénieur Réseau basé à Bordeaux, bureau F108 (IOA, Rue François Mitterrand, 33400 Talence) *Institut Optique Graduate School* 2 Avenue Augustin Fresnel - 91127 PALAISEAU Cedex Tel. +33 5 57 01 71 52 - Mob. +33 6 08 08 41 05

4 20

Announcement: NAV 4.7.1 released
by Morten Brekkevold 12 Jun '17

12 Jun '17

We apologize for the issues with yesterday's NAV release, which, apparently, our test suite was unable to detect. We are hereby releasing NAV 4.7.1, which addresses the known issues of yesterday's release. The source code is available for download at GitHub [1]. A new package for Debian Jessie is published in our APT repository [2], as usual. The virtual appliance will be updated shortly. Changes ======= As always, we recommend you read the release notes [3] for a fuller description of the new features and significant changes. These bugs have been fixed: * #1524 (Auditlog is a top-level module, causing all of NAV 4.7.0 to break) * #1528 (All ipdevpoll jobs, except `dns` and `snmpcheck`, stopped working after upgrade to 4.7.0) * #1527 (ipdevpoll logs every line twice) Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/4.7/release-notes.html#nav-4-7 -- Morten Brekkevold UNINETT AS

2 2

Announcement: NAV 4.7.0 released
by Morten Brekkevold 08 Jun '17

08 Jun '17

The initial 4.7 series release of NAV is now out! The source code is available for download at GitHub [1]. A new package for Debian Jessie is published in our APT repository [2], as usual. The virtual appliance will be updated shortly. Changes ======= As always, we recommend you read the release notes [3] for a fuller description of the new features and significant changes. NAV 4.7 introduces the following user-visible features and improvements: * #1174 (Rewrite ipdevpoll's multiprocess mode to use generic worker model) * #1183+#1463 (Monitor BGP connectivity) * #1236+1416 (Feature request: API for unrecognized neighbors) * #1239 (multidashboard export import) * #1411+#1515 (Add PortAdmin "Write mem" support for H3C switches) * #1428 (added broadcast & multicast counters to interfaces (ipdevinfo)) * #1467 (Add support for Comet MS series data loggers) * #1468 (Rittal cmc iii support) * #1469 (Powernet: Distinguish between phase load and bank load sensors.) * #1472 (Added support for Raritan PDU2 mib PDUs) * #1474 (Add a comprehensive view of collected sensors and their data on a new Sensors tab in ipdevinfo) * #1475 (Collect sensor readings from Lenovo/IBM PDUs (Power Distribution Units)) * #1486+#1488 (Add a rack based view of environment sensors in a room) * #1489+#1492 (Avoid redundant port counter collection from virtualized instances, such as Cisco VRF) * #1498 (Add fullscreen mode for all maps) * #1518 (Default setting for map starting point when selecting room geo location) * #1522 (Auditlog) These reported bugs have been fixed: * #1403 (deleting a netbox makes data-collection stop) * #1456 (The old status page code should be removed) * #1462 (Netmap performance improvements) * #1493 (Status widget, "Not device group" filter is wrong) * #1496 (Missing jQuery tinysort javascript library) * #1500 (Sensor details - fix spelling on "Thesholds") * #1507 (The regexp for ifalias is not shown) * #1511 (Minor IPAM improvements) * #1512 (Update old javascript libraries) * #1519 (ipdevinfo doesn't list aggregators for some Juniper interfaces) Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/4.7/release-notes.html#nav-4-7 -- Morten Brekkevold UNINETT AS

1 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users Juni 2017