Nav-users

nav-users@lister.sikt.no

1 participants
1378 discussions

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 05 Jan '06

05 Jan '06

On Wednesday 04 January 2006 13:41, Vidar Faltinsen wrote: > On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > > > Missing subinterfaces are on different modules... > > > > What I should check? > > > > MRTG is working with this routers with no problem. > > MRTG has traffic counters for the interfaces that NAV are missing? > > You should verify what the router returns of ifindexes/ifdescr from > the interfaces MIB. I know the support has been varying in respect > to fast/gigethernet-based subinterface support. At one point ios > gave us the ifindexes, but the octet counters were not maintained. > > Do a snmpwalk directly to the router in question, something like: > > snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr > > or > > snmpwalk -On -c <snmp read community> -v2c <ip address> > .1.3.6.1.2.1.2.2.1.2 > I have similar problems with one of our 2900 catalyst switch with ATM port, snmpwalk shows interfaces, nav not. In cricket there is only CPU statistics. Question no1: What is the best way to debug such problems? Question no2: What about adding user-specific OIDs? Any help to this nav-section? regards -- Woj >From odd.hauge at hiMolde.no Thu Jan 5 23:45:36 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Fri Jan 6 00:11:49 2006 Subject: [Nav-users] Problems adding users Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C21B8C17(a)stam.himolde.no> FYI: A recompile of Nav (bleeding edge) solved the problem. Nothings better ;) - odd arne > -----Original Message----- > From: Hauge Odd Arne > Sent: Thursday, January 05, 2006 8:51 AM > To: Hauge Odd Arne; nav-users(a)itea.ntnu.no > Subject: RE: [Nav-users] Problems adding users > > Seems like som postgres problem to me. After trying to add a > new user I did a ps command on the nav-box: > postgres 5836 0.0 2.9 41216 14936 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55524) idle in > transaction > postgres 5850 0.0 3.0 41480 15908 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55530) idle in > transaction > postgres 5852 0.0 2.9 41216 14940 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55532) idle in > transaction > postgres 5856 0.0 2.8 41216 14848 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55534) INSERT waiting > > I'm not sure what the idle in transaction and insert waiting means... > It seems to me it's only the navprofiles database I have > problems adding information into. I can not add new accounts > or groups. But I can manage profiles for existing nav users > (read admin user). > > - odd arne hauge > > > > > > > -----Original Message----- > > From: nav-users-bounces(a)itea.ntnu.no > > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Hauge Odd Arne > > Sent: Wednesday, January 04, 2006 3:47 PM > > To: nav-users(a)itea.ntnu.no > > Subject: [Nav-users] Problems adding users > > > > Hi. > > > > While testing the bleeding edge of Nav I'm having problem adding > > users. > > I get the following output in my browser when I tries to add a new > > user: > > "no such account 1000" > > > > Any suggestions ? > > > > Regards > > Odd Arne Hauge > > > > > > _______________________________________________ > > Nav-users mailing list > > Nav-users(a)itea.ntnu.no > > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > >

1 0

SV: Re: SV: [Nav-users] logger.conf
by peder.sefland＠hivolda.no 04 Jan '06

04 Jan '06

> Do you have any false alerts on dns-mismatch? I'm not shure that this > has anything to do with this. > > All device names are resolved correctly, beacuse all hostname informations are in NAV machine /etc/hosts file. -- Woj Is this how it should work? I have thought that my colleagues at computer-dep. only needs to registrer their servers or wireless in the web-interface, but not to edit /etc/host file on the nav-box. Peder >From odd.hauge at hiMolde.no Thu Jan 5 08:50:57 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Jan 5 08:51:06 2006 Subject: [Nav-users] Problems adding users Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C27D128E(a)stam.himolde.no> Seems like som postgres problem to me. After trying to add a new user I did a ps command on the nav-box: postgres 5836 0.0 2.9 41216 14936 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55524) idle in transaction postgres 5850 0.0 3.0 41480 15908 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55530) idle in transaction postgres 5852 0.0 2.9 41216 14940 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55532) idle in transaction postgres 5856 0.0 2.8 41216 14848 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55534) INSERT waiting I'm not sure what the idle in transaction and insert waiting means... It seems to me it's only the navprofiles database I have problems adding information into. I can not add new accounts or groups. But I can manage profiles for existing nav users (read admin user). - odd arne hauge > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Hauge Odd Arne > Sent: Wednesday, January 04, 2006 3:47 PM > To: nav-users(a)itea.ntnu.no > Subject: [Nav-users] Problems adding users > > Hi. > > While testing the bleeding edge of Nav I'm having problem > adding users. > I get the following output in my browser when I tries to add > a new user: > "no such account 1000" > > Any suggestions ? > > Regards > Odd Arne Hauge > > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

1 0

A couple of bugs
by kjetil.olsen＠usit.uio.no 04 Jan '06

04 Jan '06

We have problems when we configure IP-addresses directly on physical interfaces on routers (cisco catalysts or ordinary cisco-routers e.g. 7206) and connect them to switches (we use switches to interconnect several routers). The interfaces are discovered by gdd, but not placed in the correct VLAN even if we use the correct description-field (with VLAN ID) and the VLAN is known to NAV, and the switch is correctly configured with VLAN. This messes up the traffic-map, making it usesless.... (In NAV2 this works like a charm....) I would think that more detailed debugging is needed :-) Contact nett-drift(a)usit.uio.no to get access. And while I'm at it.... A second bug (that I think has been mentioned before, but): The cricket-config does not contain the correct decription-fields on routers. The router is OK, and the "Router ports" report (.../report/gwport) is also OK, but cricket says "No decription available". On switches we do not see this problem, port descriptions show up fine in cricket. I guess that "makecricketconfig" is to blame in one way or another :-) And a third one :-) In the traffic-map I can right-click on a router and get a router-menu. Choosing "Netlist" tryes to access cricket, not the reports.... --Kjetil

2 1

Feature requests anyone?
by kjetil.olsen＠usit.uio.no 04 Jan '06

04 Jan '06

Use of SNMPv2-counters (64-bit) in cricket. We have a number of interfaces that already have problems with interfaces having more than 2^32 bytes pr minute of traffic. --Kjetil

1 0

Feature requests anyone?
by Vidar.Faltinsen＠uninett.no 04 Jan '06

04 Jan '06

Hi, As I mentioned in a previous posting NTNU and UNINETT are currently planning the 2006 NAV activity. We are more ambitious this year and are prepared to put a lot of resources into maintaining and further developing NAV. We are currently working on a list of new features to implement. I could present the list, but at this stage I will rather ask the NAV community... what do you want? We certainly have some ideas ourselves, partly based on feedback, both on- and offline. Nevertheless, please empty your (navish) heart and express your wishes! This is your chance (well, one of them). We are interested in request for both the short and long term. I assume more smooth installation, maybe support for certain equipment types, etc, is on the list. Further - in terms of new and/or improved functionality - what would you like? As NAV is an open source project, contributions are very much welcome. If you have plans or hopes in this respect, please let us know. All input is of value. This includes criticism. Looking forward to this thread! - Vidar >From woj at tstd.pl Wed Jan 4 14:08:58 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:09:16 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> References: <200601041322.24818.woj(a)tstd.pl> <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> Message-ID: <200601041408.59366.woj(a)tstd.pl> On Wednesday 04 January 2006 13:41, you wrote: > On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > > > Missing subinterfaces are on different modules... > > > > What I should check? > > > > MRTG is working with this routers with no problem. > > MRTG has traffic counters for the interfaces that NAV are missing? yes, I am using in mrtg simply: ./cfgmaker <snmp read community>@$<ip address> > mrtg_file.cfg I just checked, mrtg also can't see fast ethernet subinterfaces, but it can see main fast etherent interfaces, and ALL atm subinterfaces. Missing (in NAV) atm interfaces are configured typically. > You should verify what the router returns of ifindexes/ifdescr from > the interfaces MIB. I know the support has been varying in respect > to fast/gigethernet-based subinterface support. At one point ios > gave us the ifindexes, but the octet counters were not maintained. > > Do a snmpwalk directly to the router in question, something like: > > snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr > > or > > snmpwalk -On -c <snmp read community> -v2c <ip address> > .1.3.6.1.2.1.2.2.1.2 > I did it. I can see there missing atm subinterfaces, and fast Ethernet interfaces but no fast ethernet subinterfaces (802.1q). regards, thanks for help -- Woj >From woj at tstd.pl Wed Jan 4 14:16:53 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:17:09 2006 Subject: [Nav-users] Cricket error In-Reply-To: <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BBC1DB.7030408(a)ntnu.no> <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> Message-ID: <200601041416.54494.woj(a)tstd.pl> On Wednesday 04 January 2006 13:47, Kristian Eide wrote: > > I am not sure how to add OID's to NAV without messing with the database, > > perhaps some other NAV-developer may answer this? > > I think editDB has support for adding new OIDs. > Yes, there is, but I can't find descriptions Howto fill form: OID key * Snmpoid * OID source Match regexp OID name MIB Description Can somebody give some detailed info, how to fill these fields, and how will this work with cricket? regards -- Woj >From ddeineka at gmail.com Wed Jan 4 15:39:43 2006 From: ddeineka at gmail.com (Dmitry Deineka) Date: Wed Jan 4 14:39:53 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> References: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> Message-ID: <a6fee5220601040539h59214bc6h(a)mail.gmail.com> So, Happy New Year to all ! I with to say thanks to NAV developers and community for great monitoring/network inventory software (but a bit difficult for install :-) We switch from nagios to NAV for number of reasons: 1) More visualizations 2) More reports 3) Great search functions (per mac, vlan, ports etc). Its really great! What I need with NAV: 1) SNMP trap handling. For example, we have number of small POPs with APC Smart UPS+AP9617 mgmnt cards installed. I wish to monitor power outages within NAV - for our duty staff (much less skilled than noc people :) is better to see one application on screen 2) SNMP polling and thresholds. Is link quality bad ? Is interface load too high or too low ? 3) More FreeBSD support. I think that following message from archive must be on NAV wiki: http://desperados.itea.ntnu.no/pipermail/nav-users/2005-December/001117.html With best regards, Dmitry 2006/1/4, Vidar Faltinsen <Vidar.Faltinsen(a)uninett.no>: > > Hi, > > > We are currently working on a list of new features to implement. > I could present the list, but at this stage I will rather ask the > NAV community... what do you want? > - Vidar > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > -- Dmitry A.Deineka >From woj at tstd.pl Wed Jan 4 14:59:11 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:59:31 2006 Subject: [Nav-users] logger.conf Message-ID: <200601041459.11900.woj(a)tstd.pl> Hello, how should be cisco box configured to have correct analyse in NAV Syslog Analyzer? I have cisco communicates in following format: Jan 4 14:50:47 <router_name> 2951: Jan 4 13:50:46: %SYS-5-CONFIG_I: Configured from console by vty0 (<ip>) I can see this communicates in NAV, but only in: https://nav_ip/logger/?error ("parsing errors" link) Thanks for info regards -- Woj >From peder.sefland at hivolda.no Wed Jan 4 15:14:48 2006 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Wed Jan 4 15:15:16 2006 Subject: SV: [Nav-users] logger.conf Message-ID: <s3bbe67d.030(a)HVO-3.hivolda.no> I have experience the same thing. But some of my switches that has only ip-adresse and no dns-name turn up in the Syslog Analyser. All the others turn up under "parsing errors" link. Do you have any false alerts on dns-mismatch? I'm not shure that this has anything to do with this. Peder Sefland >>> Wojciech Kozicki <woj(a)tstd.pl> 04.01.2006 14:59:11 >>> Hello, how should be cisco box configured to have correct analyse in NAV Syslog Analyzer? I have cisco communicates in following format: Jan 4 14:50:47 <router_name> 2951: Jan 4 13:50:46: %SYS-5-CONFIG_I: Configured from console by vty0 (<ip>) I can see this communicates in NAV, but only in: https://nav_ip/logger/?error ("parsing errors" link) Thanks for info regards -- Woj _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >From woj at tstd.pl Wed Jan 4 15:20:18 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 15:20:35 2006 Subject: SV: [Nav-users] logger.conf In-Reply-To: <s3bbe67d.031(a)HVO-3.hivolda.no> References: <s3bbe67d.031(a)HVO-3.hivolda.no> Message-ID: <200601041520.19244.woj(a)tstd.pl> On Wednesday 04 January 2006 15:14, Peder Magne Sefland wrote: > I have experience the same thing. But some of my switches that has only > ip-adresse and no dns-name turn up in the Syslog Analyser. All the > others turn up under "parsing errors" link. > > Do you have any false alerts on dns-mismatch? I'm not shure that this > has anything to do with this. > > All device names are resolved correctly, beacuse all hostname informations are in NAV machine /etc/hosts file. -- Woj >From Vidar.Faltinsen at uninett.no Wed Jan 4 15:28:53 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 15:29:12 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <7DA8B65EACA61E4B8DC3FA6668A53E420FF471(a)edxmb3.jdnet.deere.com> References: <7DA8B65EACA61E4B8DC3FA6668A53E420FF471(a)edxmb3.jdnet.deere.com> Message-ID: <Pine.LNX.4.64.0601041525220.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, McDermott Troy wrote: > First off, thank you all very much for creating and maintaining this > software; it's made my job (and life) much easier. ...and life - wow! Thank you! > One little suggestion: a non-cisco syslog module, where syslog output > from devices like UPS, non-cisco switches, and so on could be viewed > through the web interface. Even something simple that would be > searchable with text strings and regexp would be very helpful. Thank you for your input. We will definitely consider this. > Thanks for asking! > > -Troy - Vidar > >> -----Original Message----- >> From: nav-users-bounces(a)itea.ntnu.no >> [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Vidar Faltinsen >> Sent: Wednesday, January 04, 2006 7:02 AM >> To: nav-users(a)itea.ntnu.no >> Subject: [Nav-users] Feature requests anyone? >> >> Hi, >> >> As I mentioned in a previous posting NTNU and UNINETT are >> currently planning the 2006 NAV activity. We are more >> ambitious this year and are prepared to put a lot of >> resources into maintaining and further developing NAV. >> >> We are currently working on a list of new features to implement. >> I could present the list, but at this stage I will rather ask >> the NAV community... what do you want? >> >> We certainly have some ideas ourselves, partly based on >> feedback, both on- and offline. Nevertheless, please empty >> your (navish) heart and express your wishes! This is your >> chance (well, one of them). >> >> We are interested in request for both the short and long term. >> >> I assume more smooth installation, maybe support for certain >> equipment types, etc, is on the list. Further - in terms of >> new and/or improved functionality - what would you like? >> >> As NAV is an open source project, contributions are very much welcome. >> If you have plans or hopes in this respect, please let us know. >> >> All input is of value. This includes criticism. Looking >> forward to this thread! >> >> - Vidar >> _______________________________________________ >> Nav-users mailing list >> Nav-users(a)itea.ntnu.no >> http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >> >> > >From Vidar.Faltinsen at uninett.no Wed Jan 4 15:36:38 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 15:36:48 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <a6fee5220601040539h59214bc6h(a)mail.gmail.com> References: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> <a6fee5220601040539h59214bc6h(a)mail.gmail.com> Message-ID: <Pine.LNX.4.64.0601041529320.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, Dmitry Deineka wrote: > We switch from nagios to NAV for number of reasons: > 1) More visualizations > 2) More reports > 3) Great search functions (per mac, vlan, ports etc). Its really great! Valuable feedback, on behalf of the team, thank you! > What I need with NAV: > 1) SNMP trap handling. For example, we have number of small POPs with APC > Smart UPS+AP9617 mgmnt cards installed. I wish to monitor power outages > within NAV - for our duty staff (much less skilled than noc people :) is > better to see one application on screen This is on our list to. SNMP traps will be implemented. We will also have a particular focus on power, UPS and temperature statistics and alarms. > 2) SNMP polling and thresholds. Is link quality bad ? Is interface load too > high or too low ? On the list, been there (too) long. > 3) More FreeBSD support. I think that following message from archive must be > on NAV wiki: > http://desperados.itea.ntnu.no/pipermail/nav-users/2005-December/001117.html I agree. Will be done. > With best regards, > Dmitry - Vidar

2 1

Problems adding users
by odd.hauge＠hiMolde.no 04 Jan '06

04 Jan '06

Hi. While testing the bleeding edge of Nav I'm having problem adding users. I get the following output in my browser when I tries to add a new user: "no such account 1000" Any suggestions ? Regards Odd Arne Hauge

1 0

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 04 Jan '06

04 Jan '06

On Wednesday 04 January 2006 13:40, you wrote: > Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > There are (unfortunately) two directories for router-interfaces - > giga-router-interfaces and router-interfaces. Have you checked both? I can't see them in "router ports" report and can't find IP networks which are connected to them in "prefixes" report. Simply - NAV did't detect these interfaces... -- Woj >From kreide at gmail.com Wed Jan 4 13:47:26 2006 From: kreide at gmail.com (Kristian Eide) Date: Wed Jan 4 13:47:36 2006 Subject: [Nav-users] Cricket error In-Reply-To: <43BBC1DB.7030408(a)ntnu.no> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> <200601031026.55728.woj(a)tstd.pl> <43BBC1DB.7030408(a)ntnu.no> Message-ID: <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> > I am not sure how to add OID's to NAV without messing with the database, > perhaps some other NAV-developer may answer this? I think editDB has support for adding new OIDs. -- Kristian

1 0

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 04 Jan '06

04 Jan '06

Hello, I have couple of cisco 7140, and NAV can't see all routers interfaces. In router-ports report I can see only some of ATM interfaces, but not all. Also, there is lack of Fast Etherent interfaces. I tried re-adding device to nav, but it didn't help. Missing subinterfaces are on different modules... What I should check? MRTG is working with this routers with no problem. regards -- Woj >From john.m.bredal at ntnu.no Wed Jan 4 13:38:51 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Wed Jan 4 13:38:02 2006 Subject: [Nav-users] Cricket error In-Reply-To: <200601031026.55728.woj(a)tstd.pl> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> <200601031026.55728.woj(a)tstd.pl> Message-ID: <43BBC1DB.7030408(a)ntnu.no> Wojciech Kozicki wrote: > > I have some additional question, is there way to put some user-specific OIDs > to NAV-Cricket? > For example - I have cisco catalyst 2900 + ATM module, NAV is not recognizing > it correctly, can I put somewhere OIDs to have statistics generated? > > regards > The easiest way would be to add configuration to the Defaults-files in Cricket and make a local directory to collect data to using those OID's. I am not sure how to add OID's to NAV without messing with the database, perhaps some other NAV-developer may answer this? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From john.m.bredal at ntnu.no Wed Jan 4 13:40:32 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Wed Jan 4 13:39:41 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <200601041322.24818.woj(a)tstd.pl> References: <200601041322.24818.woj(a)tstd.pl> Message-ID: <43BBC240.6000303(a)ntnu.no> Wojciech Kozicki wrote: > Hello, > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > router-ports report I can see only some of ATM interfaces, but not all. Also, > there is lack of Fast Etherent interfaces. I tried re-adding device to nav, > but it didn't help. There are (unfortunately) two directories for router-interfaces - giga-router-interfaces and router-interfaces. Have you checked both? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From Vidar.Faltinsen at uninett.no Wed Jan 4 13:41:16 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 13:41:23 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <200601041322.24818.woj(a)tstd.pl> References: <200601041322.24818.woj(a)tstd.pl> Message-ID: <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > Hello, > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > router-ports report I can see only some of ATM interfaces, but not all. Also, > there is lack of Fast Etherent interfaces. I tried re-adding device to nav, > but it didn't help. > > Missing subinterfaces are on different modules... > > What I should check? > > MRTG is working with this routers with no problem. MRTG has traffic counters for the interfaces that NAV are missing? You should verify what the router returns of ifindexes/ifdescr from the interfaces MIB. I know the support has been varying in respect to fast/gigethernet-based subinterface support. At one point ios gave us the ifindexes, but the octet counters were not maintained. Do a snmpwalk directly to the router in question, something like: snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr or snmpwalk -On -c <snmp read community> -v2c <ip address> .1.3.6.1.2.1.2.2.1.2 - Vidar

1 0

no descriptions in Cricket for router ports
by Vidar.Faltinsen＠uninett.no 03 Jan '06

03 Jan '06

On Wed, 28 Dec 2005, Wojciech Kozicki wrote: > Hello, > > my NAV is up and running (installation done by this howto: > http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4). > > I have some problems with Cricket, there is no description for router graphs. > These are cisco 7206, 750x, 7140 boxes. > > Description on routers interfaces are in following format (example): > > interface FastEthernet1/0/0.200 > description elink,xxx_gw,xxx,,200 > > And in "Router ports report", for this port I can see: > - in vlan column: "200" > - in nettype column: "elink" > - in netident: "router_name,xxx_gw" > so it is recognized correctly in NAV... > > For switches - cisco 2900, 2950 there is no problem, all interfaces are > described properly in Cricket. > > What I should check, please help. I assume you refer to the cricket overview page with all the router ports for a given router that states "no description available" in the description column. This issue is addressed and I believe solved, however I do not think it is "out there yet", John Magne can correct me if I am wrong. - Vidar

2 1

Cricket error
by john.m.bredal＠ntnu.no 03 Jan '06

03 Jan '06

kjartan.malde(a)uis.no wrote: > The powersupply on my Nav died, and since I got it back up I get these > messeges every minute. Hope anyone can help me. The messages are coming > from a one of the cards on a Cat6509. I running Nav 3.0 on CentOS. > It seems like the configuration is wrong. Cricket is trying to query an OID that does not exist, in this case the ifInErrors-counter on the various ifindexes seen in the mail. > > Error and the lines leading up to it: > [28-Dec-2005 09:12:07 ] Retrieved data for 9_15 (225): > 166758758,116225181,0,0,1572947,1109513 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_16 (226): > 10068,558308,0,0,16,8370 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_17 (227): > 571765657,1224452921,0,0,3818864,4488386 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_18 (228): > 101553,744762,0,0,589,6513 > [28-Dec-2005 09:12:07*] Received SNMP response with error code noSuchName. > OID: 1.3.6.1.2.1.2.2.1.14.229 > <snip> My guess is that the information in the database was not correct during the last creation of the config (there is one every night), and it should disappear as soon as the database comes up to date. Is the problem still there? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From john.m.bredal at ntnu.no Tue Jan 3 10:24:05 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Tue Jan 3 10:23:14 2006 Subject: [Nav-users] weird problem In-Reply-To: <200512271957.25492.woj(a)tstd.pl> References: <200512271921.22867.woj(a)tstd.pl> <200512271949.35618.woj(a)tstd.pl> <200512271957.25492.woj(a)tstd.pl> Message-ID: <43BA42B5.6040707(a)ntnu.no> Wojciech Kozicki wrote: <snip> > btw. What should I do with something like this (Nav keeps sending it to my by > email): > > [27-Dec-2005 18:40:03 ] Retrieved data for x.x.1.12 (): > 18,17,19552316,185184868,904658749,19,29 > [27-Dec-2005 18:40:03*] Cannot > update /usr/local/nav/cricket/cricket-config/../cricket-data//routers/x.x.1.12.rrd: > expected 4 data source readings (got 7) from > N:18:17:19552316:185184868:904658749:19:29:... > > x.x.1.12 is 7513 cisco router. > Quoting one of my earlier mails on this list: " Borge Brunes wrote: > Folks, > > I did an upgrade from svn 3290 to 3318, and now these messages > are popping in: > [08-Aug-2005 21:30:34*] Cannot update /usr/local/nav/cricket/cricket-config/../cricket-data//switches/tf4292-sw.infra.uit.no.rrd: expected 5 data source readings (got 4) from N:0:1:40827872:56543441:... > This problem is very common. RRDTool, which Cricket uses to store data, uses rrd-files to store data. These files, once created, does only accept a certain number of data-sets. If you try to insert more or less datasets than it can handle this error will occur. The reason for this is that NAV has detected that tf4292-sw.infra.uit.no can respond to 4 snmp values when it previously responded to 5. When it tries to store only 4 this error occurs. There is no easy/good fix to this. One solution is to delete the rrd-file so that Cricket makes a new one with 4 data-sets. This is the easiest one but will of course delete all historical data. Another solution is to dump all old data, create the new file with 4 sets and insert old data to the new file. This is more complicated though. My dream is to automate this process, but at the moment there is no time. " -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From Vidar.Faltinsen at uninett.no Tue Jan 3 10:25:39 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Tue Jan 3 10:25:45 2006 Subject: [Nav-users] NAV 3.0.0 in Debian? In-Reply-To: <200512271252.39624.woj(a)tstd.pl> References: <200512271252.39624.woj(a)tstd.pl> Message-ID: <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> On Tue, 27 Dec 2005, Wojciech Kozicki wrote: > 1. Will be NAV ported to Debian? Our ambition is definitely to maintain an updated NAV debian package. UNINETT and NTNU are currently planning our 2006 joint activity. There will be a remarkably increase in activity compared to the relatively slow 2005. The primary OS for UNINETT is debian (our so-called samson3 platform). We will make sure the dedian package is maintained and up to date. The current status is that a 3.0 package is in the making, final testing needs to be done. I cannot commit a date for this, as of now, but we are definitely addressing this and other pressing NAV issues. Hang in there. - Vidar >From woj at tstd.pl Tue Jan 3 10:26:54 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Jan 3 10:27:09 2006 Subject: [Nav-users] Cricket error In-Reply-To: <43BA40F0.1010406(a)ntnu.no> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> Message-ID: <200601031026.55728.woj(a)tstd.pl> On Tuesday 03 January 2006 10:16, John Magne Bredal wrote: > kjartan.malde(a)uis.no wrote: > > The powersupply on my Nav died, and since I got it back up I get these > > messeges every minute. Hope anyone can help me. The messages are coming > > from a one of the cards on a Cat6509. I running Nav 3.0 on CentOS. > > It seems like the configuration is wrong. Cricket is trying to query an > OID that does not exist, in this case the ifInErrors-counter on the > various ifindexes seen in the mail. > [...] I have some additional question, is there way to put some user-specific OIDs to NAV-Cricket? For example - I have cisco catalyst 2900 + ATM module, NAV is not recognizing it correctly, can I put somewhere OIDs to have statistics generated? regards -- Woj >From woj at tstd.pl Tue Jan 3 10:33:55 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Jan 3 10:34:09 2006 Subject: [Nav-users] NAV 3.0.0 in Debian? In-Reply-To: <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> References: <200512271252.39624.woj(a)tstd.pl> <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> Message-ID: <200601031033.55815.woj(a)tstd.pl> On Tuesday 03 January 2006 10:25, Vidar Faltinsen wrote: > On Tue, 27 Dec 2005, Wojciech Kozicki wrote: > > 1. Will be NAV ported to Debian? > > Our ambition is definitely to maintain an updated NAV debian package. > UNINETT and NTNU are currently planning our 2006 joint activity. There > will be a remarkably increase in activity compared to the relatively > slow 2005. It is really great to hear it! Nav is really good piece of software, but its evolution is quite slow. > The primary OS for UNINETT is debian (our so-called samson3 platform). > We will make sure the dedian package is maintained and up to date. > The current status is that a 3.0 package is in the making, final > testing needs to be done. I cannot commit a date for this, as of now, > but we are definitely addressing this and other pressing NAV issues. > nice... best regards -- Woj

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users