- Nav-users - lister.unit.no

Could we updated NAV port metrics every 1 min?
by Bruce Zhang 11 Sep '17

11 Sep '17

Hi all, I am a network administrator and new to NAV. I really like NAV and am going to use it. But I found the Port Metrics Traffic graphs is updating every 5 mins.(I knew it's default intervals for NAV) I want to get more accurate Port traffic graphs, so could we change it from 300s to 60s? I did research and changed storage-schemas.conf(added 60s:1d) and used whisper-info to ensure those ports traffic wsp files have been changed to 60s. But I still can't get correct data via rickshaw JS and NAV still collected data in every 300s. So is that possible to change it? Or someone can point me to the right direction? Thanks. Bruce

3 2

Dash URL
by Erik 11 Sep '17

11 Sep '17

Hi, does any know if/how you can set a URL for the fullscreen/autozoom/2min netmap dashboard, so I can use it to start a dashboard system in IE kiosk to display it? Cheers Erik

2 1

Delayed alerts
by Roger Aas 04 Sep '17

04 Sep '17

Is it possible to configure alerts for a boxdown alert to be sent after a specified amount of downtime, f.ex. 4 days? I have a customer with some Cisco IR809 industrial routers installed on LNG trailer trucks that go active when the trailer is started and goes down when the trailer is parked. This means the router goes down and comes up all the time, we do not want alerts for that. But if the router does not become active after f.ex. 4 days the customer would like to get a message about that, maybe it means there is some other problem with the connection that they need to check. Is this possible with NAV? I only find "weekly at predefined time", but if I set the "Weekly dispatch time" to "08:00" and "Weekly dispatch day" to "monday", and the truck is parked Sunday evening, I will get a message Monday morning that it is down, even if it has been down for just some hours. I basically want a to be able to set a delay for alerts that counts down a specified amount of minutes/hours/days before sending a boxdown alert. Best regards, Roger

3 4

Getting GPS data from routers
by Roger Aas 01 Sep '17

01 Sep '17

Some models of Cisco routers have inbuilt GPS antennas and it is possible to get location data from the router, using both CLI and SNMP. Is it possible to add code in NAV to import this GPS data into the "Position" field in the "Rooms" data? For routers that are in a static location it means the location will be correct, not a best effort by pointing on a map. :-) For routers that are in motion it means it is possible to track them and at least know the last location. lng-truck-1-L22#show cellular 0 gps detail GPS Info ------------- GPS Feature: enabled GPS Port Selected: Dedicated GPS port GPS State: GPS enabled GPS auto tracking status: unknown GPS auto tracking config: disabled GPS Mode Configured: standalone Latitude: 60 Deg 28 Min 54.7647 Sec North Longitude: 5 Deg 23 Min 22.7313 Sec East Timestamp (GMT): Wed Aug 30 09:46:56 2017 Fix type index: 0, Height: 81 m HDOP: 0.8, GPS Mode Used: standalone Satellite Info ---------------- Satellite #2, elevation 17, azimuth 42, SNR 34 Satellite #9, elevation 11, azimuth 347, SNR 35 Satellite #16, elevation 17, azimuth 288, SNR 39 Satellite #21, elevation 25, azimuth 177, SNR 38 Satellite #23, elevation 15, azimuth 320, SNR 42 Satellite #25, elevation 27, azimuth 123, SNR 43 Satellite #26, elevation 45, azimuth 282, SNR 46 Satellite #29, elevation 65, azimuth 88, SNR 34 Satellite #31, elevation 45, azimuth 222, SNR 43 Satellite #5, elevation 16, azimuth 75, SNR 0 Satellite #20, elevation 6, azimuth 118, SNR 0 roger@nav:~$ snmpwalk -On -c secretpw -v 2c 10.140.73.1 1.3.6.1.4.1.9.9.661.1.4.1.1.1 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.1.16 = INTEGER: 2 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.2.16 = INTEGER: 2 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.3.16 = INTEGER: 48 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.4.16 = STRING: "59 Deg 25 Min 24 Sec North" .1.3.6.1.4.1.9.9.661.1.4.1.1.1.5.16 = STRING: "5 Deg 25 Min 26 Sec East" .1.3.6.1.4.1.9.9.661.1.4.1.1.1.6.16 = STRING: "GMT: Wed Aug 30 10:00:17 2017 " .1.3.6.1.4.1.9.9.661.1.4.1.1.1.7.16 = Gauge32: 0 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.8.16 = Gauge32: 0 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.9.16 = Gauge32: 0 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.10.16 = INTEGER: 2 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.11.16 = INTEGER: 1 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.12.16 = INTEGER: 19 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.13.16 = Gauge32: 0 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.14.16 = INTEGER: 2 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.15.16 = Gauge32: 0 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.16.16 = Gauge32: 0 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.17.16 = Gauge32: 0 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.18.16 = Gauge32: 0 .1.3.6.1.4.1.9.9.661.1.4.1.1.1.19.16 = Gauge32: 11 1.3.6.1.4.1.9.9.661.1.4.1.1.1.1 (c3gLbsModeSelected) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.2 (c3gLbsState) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.3 (c3gLbsLocFixError) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.4 (c3gLbsLatitude) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.5 (c3gLbsLongitude) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.6 (c3gLbsTimeStamp) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.7 (c3gLbsLocUncertaintyAngle) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.8 (c3gLbsLocUncertaintyA) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.9 (c3gLbsLocUncertaintyPos) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.10 (c3gLbsFixtype) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.11 (c3gLbsHeightValid) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.12 (c3gLbsHeight) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.13 (c3gLbsLocUncertaintyVertical) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.14 (c3gLbsVelocityValid) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.15 (c3gLbsHeading) 1.3.6.1.4.1.9.9.661.1.4.1.1.1.16 (c3gLbsVelocityHorizontal) Best regards, Roger

3 4

Topology not updating properly
by Andreas Dobloug 31 Aug '17

31 Aug '17

Sorry for spamming the list: the old topology detector has been removed, so please ignore this. We're still having problems with the topology not updating. Is this related to the way we handle linkdown status messages? Should they be cleared or acknowledged when the topology has changed? best regards Andreas Dobloug USIT/UiO > -----Original Message----- > From: Andreas Dobloug > Sent: Thursday, August 24, 2017 10:22 AM > To: Andreas Dobloug <andreas.dobloug(a)usit.uio.no>; Morten Brekkevold > <morten.brekkevold(a)uninett.no> > Cc: nav-users(a)uninett.no > Subject: RE: Outdated cam records > > > We've tried this, and nothing is logged other than "topo for <switch> > completed > > in ..." > > > > Should we try to activate the old topology detector (/usr/lib/nav/network- > > discovery)? > > > > Sorry, this last part is probably unrelated: the topology is also not updating. > > best regards > Andreas Dobloug > USIT/UiO

2 8

GEOMAP
by Erik 31 Aug '17

31 Aug '17

Hi, I see the locations popping up on GEOMAP, but not the (WAN) links as shown in some example screenshots. Anyone have a clue why this could be? Cheers Erik

4 6

Fresh install - Geomap error
by Espen Lorentzen 24 Aug '17

24 Aug '17

I recently did a fresh install of nav on Debian Jessie. Everything is working except geomap, when navigating to http://nav-server/geomap/normal/ i receive an alert via mail with the following information: Internal Server Error: /geomap/normal/data Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 111, in get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python2.7/dist-packages/nav/web/geomap/views.py", line 163, in data do_fetch_data) File "/usr/lib/python2.7/dist-packages/nav/web/geomap/views.py", line 210, in get_formatted_data output = format_data(format_, features) File "/usr/lib/python2.7/dist-packages/nav/web/geomap/output_formats.py", line 96, in format_data return formatter(featurelist) File "/usr/lib/python2.7/dist-packages/nav/web/geomap/output_formats.py", line 45, in make_geojson return json.dumps(geojson) File "/usr/lib/python2.7/json/__init__.py", line 243, in dumps return _default_encoder.encode(obj) File "/usr/lib/python2.7/json/encoder.py", line 207, in encode chunks = self.iterencode(o, _one_shot=True) File "/usr/lib/python2.7/json/encoder.py", line 270, in iterencode return _iterencode(o, 0) File "/usr/lib/python2.7/json/encoder.py", line 184, in default raise TypeError(repr(o) + " is not JSON serializable") TypeError: <lazy_dict {'color': '#666666', 'popup': {'content': u'<div class="place-popup">\n\n <table class="listtable">\n <tr>\n <th>Rooms</th>\n <th>IP devices</th>\n <th>CPU load (max)</th>\n </tr>\n <tr>\n <td>1</td>\n <td>1</td>\n <td>unknown</td>\n </tr>\n </table>\n\n \n <table class="listtable">\n <caption>\n <a href="/search/room/MEKU-2ETG-EF-02/"\n target="_blank"\n title="View room information">\n MEKU-2ETG-EF-02\n (Etasjefordeling #2 - MEKU)\n </a>\n </caption>\n\n <tr>\n <td><b>IP Devices:</b> 1</td>\n <td><b>CPU load (max):</b> unknown</td>\n </tr>\n\n <tr>\n <td colspan="2">\n <ul class="large-block-grid-2">\n \n <li>\n <h5>\n <a href="/ipdevinfo/sw-meku-03.net.domain.no/"\n target="_blank"\n title="View in IP Device Info"> sw-meku-03.net.domain.no</a>\n </h5>\n <ul class="no-bullet">\n <li><b>IP:</b>10.10.10.10</li>\n <li><b>Category:</b> SW</li>\n <li><b>Type:</b> Cisco C2960S</li>\n <li><b>Up:</b> y</li>\n <li><b>Load:</b> unknown</li>\n </ul>\n </li>\n \n </ul>\n </td>\n </tr>\n\n </table>\n \n\n</div>\n', 'closable': True, 'id': 'popup-cn[cn[37]]', 'size': [300, 250]}, 'type': 'node', 'size': 4}> is not JSON serializable I guess there's a step i forgot, but can't figure out what it is. -- MVH / REGARDS: Espen Lorentzen esplor(a)gmail.com

4 9

Outdated cam records
by Andreas Dobloug 24 Aug '17

24 Aug '17

Hi, we're having trouble with outdated cam records on some of our switches: nav seems to only collect cam records from a random subset of ports on each switch. We're tried snmpwalking the switch, and it seems like the mac addresses are reported correctly by the switch. This occurs both on nxos (Nexus) switches and older IOS switches best regards Andreas Dobloug University of Oslo

2 4

Geomap not showing anything
by Erik 23 Aug '17

23 Aug '17

Hi, All other things work now fine, even in Rooms it shows a map. But in Geomap itself, is see a blank page, no errors, not even in the logs? Anyone experienced this and n ow what to do to fix it? running 4.7.1 Cheers Erik

3 3

RE: Frsh install NAV & Graphite issue
by Erik Kemper 18 Aug '17

18 Aug '17

Hi Morten, Guess what, that ALLOWD_HOSTS did the trick! Cheers Erik QUAKER CHEMICAL CORPORATION DISCLAIMER: This message is intended only for the use of the individual or entity to which it is directed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by reply e-mail and delete the message and any attachments.

1 0

Frsh install NAV & Graphite issue
by Erik 17 Aug '17

17 Aug '17

Hi, I see some graphs in NAV and some not. Particularity the Etherports are empty? Sensors tab shows graphs. Graphite on port 8000 works and shows devices and graphs. The only thing I can find in the log is: [WARNING] [pid=526 nav.django.auth] User default denied access to /search/? query=10.100.5.1 Which in my noobie experience with NAV and Graphite i cannot make out what is wrong? I cannot find anything for days now in any google serach on NAV installs.... Cheers Erik

2 1

Thresholds
by René Romijn 16 Aug '17

16 Aug '17

Hi, We are using some thresholds on some important uplinks and they are working good. But, is it possible to set a time-range to disable the thresholds? At night we are running a backup and then the thresholds gives an alarm, so it would be nice to disable that on those times. Kind regards, Rene

2 2

Installing Nav on Debian 9.1
by Tal Bar-Or 02 Aug '17

02 Aug '17

Hello , I am trying to install fresh latest installation of Nav on clean Debian 9.1 x64 server, facing some issues . My issue is that i see on official NAV Installation instructions for Debian its written Debian 8 (Jessie) , but i can't find any source to download requested version , so finally i used latest Debian avalble. Any advice regarding installation ? Thanks -- Tal Bar-or

2 2

Announcement: NAV 4.7.1 released
by Morten Brekkevold 12 Jun '17

12 Jun '17

We apologize for the issues with yesterday's NAV release, which, apparently, our test suite was unable to detect. We are hereby releasing NAV 4.7.1, which addresses the known issues of yesterday's release. The source code is available for download at GitHub [1]. A new package for Debian Jessie is published in our APT repository [2], as usual. The virtual appliance will be updated shortly. Changes ======= As always, we recommend you read the release notes [3] for a fuller description of the new features and significant changes. These bugs have been fixed: * #1524 (Auditlog is a top-level module, causing all of NAV 4.7.0 to break) * #1528 (All ipdevpoll jobs, except `dns` and `snmpcheck`, stopped working after upgrade to 4.7.0) * #1527 (ipdevpoll logs every line twice) Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/4.7/release-notes.html#nav-4-7 -- Morten Brekkevold UNINETT AS

2 2

Announcement: NAV 4.7.0 released
by Morten Brekkevold 08 Jun '17

08 Jun '17

The initial 4.7 series release of NAV is now out! The source code is available for download at GitHub [1]. A new package for Debian Jessie is published in our APT repository [2], as usual. The virtual appliance will be updated shortly. Changes ======= As always, we recommend you read the release notes [3] for a fuller description of the new features and significant changes. NAV 4.7 introduces the following user-visible features and improvements: * #1174 (Rewrite ipdevpoll's multiprocess mode to use generic worker model) * #1183+#1463 (Monitor BGP connectivity) * #1236+1416 (Feature request: API for unrecognized neighbors) * #1239 (multidashboard export import) * #1411+#1515 (Add PortAdmin "Write mem" support for H3C switches) * #1428 (added broadcast & multicast counters to interfaces (ipdevinfo)) * #1467 (Add support for Comet MS series data loggers) * #1468 (Rittal cmc iii support) * #1469 (Powernet: Distinguish between phase load and bank load sensors.) * #1472 (Added support for Raritan PDU2 mib PDUs) * #1474 (Add a comprehensive view of collected sensors and their data on a new Sensors tab in ipdevinfo) * #1475 (Collect sensor readings from Lenovo/IBM PDUs (Power Distribution Units)) * #1486+#1488 (Add a rack based view of environment sensors in a room) * #1489+#1492 (Avoid redundant port counter collection from virtualized instances, such as Cisco VRF) * #1498 (Add fullscreen mode for all maps) * #1518 (Default setting for map starting point when selecting room geo location) * #1522 (Auditlog) These reported bugs have been fixed: * #1403 (deleting a netbox makes data-collection stop) * #1456 (The old status page code should be removed) * #1462 (Netmap performance improvements) * #1493 (Status widget, "Not device group" filter is wrong) * #1496 (Missing jQuery tinysort javascript library) * #1500 (Sensor details - fix spelling on "Thesholds") * #1507 (The regexp for ifalias is not shown) * #1511 (Minor IPAM improvements) * #1512 (Update old javascript libraries) * #1519 (ipdevinfo doesn't list aggregators for some Juniper interfaces) Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/4.7/release-notes.html#nav-4-7 -- Morten Brekkevold UNINETT AS

1 1

Disk Usage
by Mr. Router 26 Mai '17

26 Mai '17

Hi , How can i graph and monitor disk usage (thresholds )for windows and Linux based servers . System Metrics dont show any thing like that . Regards, Mr. Router

3 2

Server Monitoring
by Mr. Router 16 Mai '17

16 Mai '17

Hi , How can i graph and monitor disk usage (thresholds )for windows and Linux based servers . System Metrics don't show any thing like that . -- ----------------------------------------- Regards, Mr.Router

1 0

Basic NetMap Question
by fgsilva＠gmail.com 15 Mai '17

15 Mai '17

Hello, I have downloaded NAV to test in my company. I have installed the software and configured around 30 production switches and routers to see how the tool works. Everything is going well except for one point. When I open the Netmap module, I can see a graphic representation of all devices on the page, however the lines connecting the devices are all green even if the device is reporting down. (If I click on it there is a red icon on the top right side of the window). My question is, what is the criteria to change the graphic representation to red ? E.g. If the device is not reporting SNMP but it is replying ping, should the status be green ? Thanks in advance, Fernando.

2 3

Ranked Statistics
by Biselx Nicolas 10 Mai '17

10 Mai '17

Hi, I have 2 questions, First: I would like to add a statistic in the file /etc/nav/sortedStats.conf but nothing appears when I go to the page Ranked Statistics. Should we change something else? In the documentation we talk about Cricket but it seems to me that this one is no longer used Example: [trunkinerrors] name: Test trunk interface in path: ports dsdescr: ifinerrors modifier: * 1000 units: milliErrors / sec linkview: Errors Second: Is it possible to run a command line statistics without having to click on the button "Show statistics" in the Ranked Statistics page ? Thank you for your help Regards, Biselx Nicolas

2 2

syslog analyzer fo HP switch
by Jakub Bartnicki 20 Apr '17

20 Apr '17

Hello, I have a question is there a possibility to view hp switch logs on NAV syslog ? Maybe some facility change on switch may help? Same question is for HP comware. Thanks in advance for reply. Jakub

2 1

Fwd: Cisco SG500+NAV
by Игорь Коив 13 Apr '17

13 Apr '17

Sorry, I've forgotten to add users list. ---------- Forwarded message ---------- From: Игорь Коив <koiv.igor(a)gmail.com> Date: 2017-02-05 21:26 GMT+03:00 Subject: Re: Cisco SG500+NAV To: Morten Brekkevold <morten.brekkevold(a)uninett.no> Good day, Morten! Let me disturb you one more time. I have just installed Graphite and suppose, all got successful but then all the metrics disappeared. What could it be? Should I reinstall all NAV or can I detect the mistake? BR, Igor Koiv 2017-02-02 9:56 GMT+03:00 Morten Brekkevold <morten.brekkevold(a)uninett.no>: > On Wed, 1 Feb 2017 22:27:23 +0300 Игорь Коив <koiv.igor(a)gmail.com> wrote: > > > Good Day! > > > Morten, there was no reason to delete the mailing list. I just didn't > want > > to disturb all the comunity. Should I add it? > > It's just that it's good form to always copy the list when the > discussion started there - unless you wish to send information you want > to keep out of the public. On the list there are potentially more > responses to be had as well. > > On the other hand, it's also not nice to bomb the list with screenshots, > so it's good to post those in a private e-mail, or paste links to web > versions. > > > Thank you for the response! > > It was not me who installed the NAV I read the manual but did nothing > about > > the installation. > > I checked the way they had installed it and suppose it is "Quick start" > > version. Will it work properly? Should I install the full version? > > Quick start is a full virtual appliance based on Debian 8 (Jessie). It > should really work out of the box. If they installed the Debian package > manually, there is more work to set things up. > > > Now daemon processes are run, the statistics is collected, suppose all > will > > be excelent !!! > > > > Graphite will be the next step. > > > > Thanks a lot, sorry for the disturbance. > > No problem, glad to hear it's working for you :-) > > -- > Morten Brekkevold > UNINETT AS >

3 22

Re: SV: SV: Edit device group from device group search
by Biselx Nicolas 06 Apr '17

06 Apr '17

Very good, thank you very much, it works very well Regards Nicolas Le 06. 04. 17 à 14:22, John Magne Bredal a écrit : > > Thank you for finding this! > > > This error is caused by a missing file. If you want to you can try to > add this file yourself so that you don't have to wait for the next > release. You should be able to find the file and the correct path by > reading this commit. > > > https://github.com/UNINETT/nav/commit/2918b0fb191ec373214f13da4ce6c3eee3cd7… > > > -- > John Magne Bredal > john.m.bredal(a)uninett.no > +4791897366 > > Abels gt. 5- Teknobyen NO-7465 Trondheim > ------------------------------------------------------------------------ > *Fra:* Biselx Nicolas <nicolas.biselx(a)epfl.ch> > *Sendt:* 6. april 2017 13:29 > *Til:* John Magne Bredal > *Emne:* Re: SV: Edit device group from device group search > > Hi, I put the error in txt file > > > Thanks > > Nicolas > > > Le 06. 04. 17 à 12:56, John Magne Bredal a écrit : >> >> Hi, that sounds like a javascript problem. >> >> >> Can you open the console (that is often F12) and see if there are any >> errors in the console output? >> >> >> -- >> John Magne Bredal >> john.m.bredal(a)uninett.no >> +4791897366 >> >> Abels gt. 5- Teknobyen NO-7465 Trondheim >> ------------------------------------------------------------------------ >> *Fra:* nav-users-request(a)uninett.no <nav-users-request(a)uninett.no> på >> vegne av Biselx Nicolas <nicolas.biselx(a)epfl.ch> >> *Sendt:* 6. april 2017 08:21 >> *Til:* nav-users(a)uninett.no >> *Emne:* Edit device group from device group search >> >> Hi all, >> >> When I want to edit a group from the device group search, I can not >> move the devices in the box "Devices in group" and the Filter don't work. >> >> I have to go through the Seed Database to make a change, but it's not >> very practical when we have a lot of device. >> >> See printscreen >> >> has anyone encountered this problem? >> >> Thank you for your help >> >> Biselx Nicolas >> >

1 0

Edit device group from device group search
by Biselx Nicolas 06 Apr '17

06 Apr '17

Hi all, When I want to edit a group from the device group search, I can not move the devices in the box "Devices in group" and the Filter don't work. I have to go through the Seed Database to make a change, but it's not very practical when we have a lot of device. See printscreen has anyone encountered this problem? Thank you for your help Biselx Nicolas

2 1

Addition of MIB for new cisco meraki switch
by David Amran 05 Apr '17

05 Apr '17

Hello, guys I’m in need for your help! I bought new meraki switch (ms220-8p) to play with Connected it to NAV with SNMP v1/2c. it says that the test is successful, however the port information is not shown, and it fails on write permissions. I think this is because I need to add it’s MIB to NAV. Can you please guide me to the resource which describes how to do that? I lack knowledge in programming and also my Linux knowledge is basic. Thanks in advance, David

2 3

Announcement: NAV 4.6.2 released
by Morten Brekkevold 16 Mar '17

16 Mar '17

The second maintenance release of the 4.6 series of NAV is now out! The source code is available for download at GitHub [1]. A new package for Debian Jessie is published in our APT repository [2], as usual. The virtual appliance will be updated shortly. Changes ======= Fixed issues in this release [3]: * #1326 (ipdevpoll -n option may be unable to match single IP addresses in environments without DNS names) * #1344 (Location is mandatory field when adding a room, but not when bulk importing) * #1433 (Users with non-set passwords may crash the login page) * #1437 (Eventengine's modulestate plugin will not handle alerts on modules that have duplicates) * #1454 (Alert message HTML templates break on events that have no associated alert type) * #1455 (Alert profiles with vendor-based filters seems to crash the Alertengine completely) * #1460 ("arp" API endpoint produces server error when mixing ip and ordering=netbox) * #1464 (Selecting page size in reports eliminates search parameters) * #1471 (Fallback to default set of sensor-collecting MIBs does not work) * #1471 (revision library stuff should be renamed to cache) * #1476 (OverflowError when searching for IPv6 prefix in the navbar) * #1477 (The Prefix details page should only list GW and GSW devices under the router ports list) * #1478 (l2trace hardcodes internal URLs) * #1479 (Change prefix links to new prefix details page) * #1480 (ipdevpoll sensors plugin should verify enterprise IDs using live queries, not db lookups) * #1481 (Organization column is empty in room deviceinfo page) * #1484 (cant save status filter when filter has special characters) * #1485 (AlertProfiles crashes with a UnicodeEncodeError when attempting to save a profile with non-ASCII characters in its name) Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://github.com/UNINETT/nav/issues -- Morten Brekkevold UNINETT AS

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users