- Nav-users - lister.unit.no

Syslog setup
by jsidwell＠perisys.net 31 Aug '05

31 Aug '05

I am currently trying to setup the syslog functionality in NAV v3 Beta, and have edited the logger.conf to select specific devices and escalate their errors/warnings. I have also changed where the log file is expected to be so that NAV can find the syslog messages from the device, but I am still not getting any data even though I see info getting dumped into the log. I have looked for documentation on this feature set, but I am unable to find anything. Can anybody point me in the right direction for this?

1 0

Bugs?
by stian.soiland＠ntnu.no 31 Aug '05

31 Aug '05

On 29. aug. 2005, at 12:11, Asbj?rn Pr?is wrote: > 1) service ftp on a ip-device (SRV) > servicemon.log says : > abstractChecker.py:__init__:104 [Info] New checker instance for x:http > abstractChecker.py:__init__:104 [Info] New checker instance for > x:https > abstractChecker.py:__init__:104 [Info] New checker instance for x:ssh > abstractChecker.py:__init__:104 [Info] New checker instance for y:ssh > db.py:getCheckers:225 [Critical] no such checker: ftp > Unfortunaly the FTP checker has not been tested in a long time. Try this patch to FtpChecker.py: : stain@isbre ~/navme/subsystem/statemon/nav/statemon/checker;svn diff Index: FtpChecker.py =================================================================== --- FtpChecker.py (revision 3231) +++ FtpChecker.py (working copy) @@ -22,8 +22,10 @@ # Authors: Magnus Nordseth <magnun(a)itea.ntnu.no> # -from nav.statemon.abstractChecker import AbstractChecker, Event -import ftplib, Socket +from nav.statemon.abstractChecker import AbstractChecker +from nav.statemon.event import Event +from nav.statemon import Socket +import ftplib class FTP(ftplib.FTP): def __init__(self,timeout,host='',user='',passwd='',acct=''): ftplib.FTP.__init__(self) Please report back if this works as I unfortunately don't have time to check this now.. I think this bug also effects PostgresqlChecker and DummyChecker as they also try to import Event from abstractChecker.py instead of event.py -- Stian S?iland People who enjoy meetings should not Birmingham, UK be in charge of anything. [Sowell] http://soiland.no/ =/\=

1 0

add type - what is this?
by BuleSari＠khio.no 23 Aug '05

23 Aug '05

Hi, I got this when I tried to add new router to the database. Got SNMP response, but can't find type in database. You must add the type <http://nav.admin.khio.no/editdb/type/edit/?sysobjectid=1.3.6.1.4.1.9.1. 50> before proceeding (a new window will open, when the new type is added, press Continue to proceed Add type Typename * Description * Vendor * Sysobjectid * 3com alcatel allied avaya breezecom cisco dlink hp symbol cdp tftp frequency ________________________________ How do i know what types there are? Mvh Bulent Sarinc khio

1 0

SV: [Nav-users] Some problems after upgrade
by Jan.Susegg＠hint.no 23 Aug '05

23 Aug '05

In the GetDeviceData.log file I get a lot of the following messages from all my switches in NAV: getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: I used snmpwalk to test snmp connectivity and it works fine. What might the problem be? In the eventEngine-stderr.log I get this error message. What might the problem be? SQLException for update statement: INSERT INTO alertq (alertqid,source,deviceid,netboxid,time,eventtypeid,alerttypeid,state,va lue,severity) VALUES ('8012','getDeviceData','54','21','2005-08-23 10:03:49','info',(SELECT alerttypeid FROM alerttype WHERE eventtypeid='info' AND alerttype='dnsMismatch'),'x','0','0') java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression. PS! I use NAV RC2

1 0

[Nav-users] Python RegEx for segmenting user access to unique devices?
by jsidwell＠perisys.net 22 Aug '05

22 Aug '05

Hello again, I am currently trying to create unique user logons to allow read only access to those devices that individual departments are responsible for monitoring. My problem is that I am not sufficiently clear on how to go about doing this. It seems that you should be able to do this in the "Privileges" section on the group creation page. Is this correct? If not, is there some other way to limit users ability to see all devices? Thank you in advance for any/all help. If possible, could somebody please send an example pytho regex for creating a demo group that can only see objects in the "demo" container?

1 0

SW vs GSW
by bertove＠gmail.com 19 Aug '05

19 Aug '05

Hello, Could someone explain to me how NAV interprets SW and GSW categories. It is not making sense to me. For example, a Cisco Catalyst 6513 has three cards: 1 for switching and 3 for MSFC routing. So I suppose that the first one should be set to SW and the MSFCs to GW. Then, the Catalyst 4006 switches that we use, NAV did not get data when I entered them as SW. It gets all the data when I change them to GSW. However, these 4006 are only doing switching on layer 2. SImilarly for Catalyst 3500 series switches. I could not find anything in the NAV wiki, any information will be appreciated. Thanks!

2 1

vlanPlot - Looks very messy
by kreide＠gmail.com 19 Aug '05

19 Aug '05

> I am in fact logged in as admin in the screenshots, but as you can see > the buttons are not there. I tried again after logging out, same result. > What could it be? I've just looked at the code, and what should happen is that if you are logged in as a valid NAV user the buttons should appear. We have occasionally had some problems with this, however, which could be due to the version of Apache/Tomcat in use as well as the Java VM. I see that you are using Linux; have you tried this on Windows? > Also, I have another little problem which you may want to fix; I went to > the user admin to check if 'admin' has all the privileges. Then I > clicked on "Submit Changes" without providing a new password. But now > the old password does not work!! Leaving the password blank doesn't work > either. It's like being locked out. Can you tell me the database command > to reset the password? This seems like an unfortunate oversight. and should be fixed. Morten? In the mean time you could connect to the navprofiles database and try something like this: UPDATE account SET password='md5'||md5('password') WHERE login='login' Also, please CC the nav-users list when you reply (unless you are including sensitive info you don't want archived). -- Kristian

2 1

[Nav-users]
by kreide＠gmail.com 19 Aug '05

19 Aug '05

> Here is the SNMPwalk output for the OID: And what ports do you get listed if you go to the swport report? And what is the output from snmpwalk of 1.3.6.1.2.1.2.2.1.5? There might be an issue of some ports being listed, but the OID for the octet counts not existing, which confuses Cricket. -- Kristian

1 0

NAV 3 RC2 Foundry Switch Support
by kreide＠gmail.com 19 Aug '05

19 Aug '05

> no. Circket only shows a few switch ports, and none of them are > Foundry. Perhaps I could come up with a decent plan with the It seems that Cricket is also missing some info. Hopefully our Circket guy can explain what when he returns from vacation. > developing NAV would find that kind of thing useful, but if this > worked properly for Foundry as well as Cisco gear, it would mean a > great deal to us. I certainly can't promise anything myself, but most Full support for Foundry would involve finding the right OIDs for collecting info about duplex / vlan / trunk status for the ports. It would then be easy to add such support. Even without this we should be able to get Cricket to collect info though. -- Kristian

1 0

[Nav-users]
by kreide＠gmail.com 18 Aug '05

18 Aug '05

> to get some graphs to display. In particular this seems to be related to > the second issue that we are having regarding the OID's that are used to > poll data from on of our routers. The error message that I am receiving > from navcron is: > [18-Aug-2005 10:15:02*] Received SNMP response with error code noSuchName. > OID: 1.3.6.1.2.1.2.2.1.10.4 If you go to the snmpoid report, can you provide the list of OIDs NAV thinks the device supports? /report/netboxsnmpoid?sysname=<sysname> What happens if you try snmpwalk on the above OID? -- Kristian

1 0

vlanPlot - Looks very messy
by arajgarh＠iwu.edu 18 Aug '05

18 Aug '05

Hi, I have entered a few routers and switches for testing. The vlanPlot gets all the links between them, but the view (http://www.iwu.edu/~acm/nav/vlanplot1.png) is rather ugly as compared to what you people have in the wiki (http://metanav.ntnu.no/moin.cgi/NAVScreenShots). I know that a lot of software allow you to drag devices in the traffic map to get a nicer view. Is that possible in NAV or is there some other way to get a view like you have in the wiki? Secondly, as you can see in the above screenshot and in this (http://www.iwu.edu/~acm/nav/vlanplot2.png), the devices are labelled by their ip address. Is it possible to display their SNMP Names instead of the IP address, since with many devices it will be difficult to keep track of the IPs. Ofcourse, one solution would be to assign DNS to the devices but I was wondering if the SNMP names are possible (perhaps by some simple change to the applet code?). Thanks, Aditya Rajgarhia Illinois Wesleyan University >From jsidwell at perisys.net Thu Aug 18 11:48:42 2005 From: jsidwell at perisys.net (Joshua Sidwell) Date: Thu Aug 18 18:49:12 2005 Subject: [Nav-users] Message-ID: <20050818164910.3ECB27FFA(a)fri.itea.ntnu.no> Hello all, I am currenlty having two separate issues with our NAV implementation. The first is that some graphics being generated by Cricket v1.0.5 are not being read back from /tmp. The permissions appear to be correct since we are able to get some graphs to display. In particular this seems to be related to the second issue that we are having regarding the OID's that are used to poll data from on of our routers. The error message that I am receiving from navcron is: Error and the lines leading up to it: [18-Aug-2005 10:15:01 ] Retrieved data for XXX.XXX.4.30 (): 1,2,100037660,5012816,232131840 [18-Aug-2005 10:15:01 ] Creating datafile /usr/local/nav/cricket/cricket-config/../cricket-data//routers/XXX.XXX.6.30. rrd for target name XXX.XXX.6.30. [18-Aug-2005 10:15:02 ] Retrieved data for XXX.XXX.6.30 (): 27,26,0,1292316,229179552 [18-Aug-2005 10:15:02 ] Retrieved data for 0_1 (2): 0,0,0,0,0,0 [18-Aug-2005 10:15:02*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.4 Error and the lines leading up to it: [18-Aug-2005 10:15:02 ] Retrieved data for XXX.XXX.6.30 (): 27,26,0,1292316,229179552 [18-Aug-2005 10:15:02 ] Retrieved data for 0_1 (2): 0,0,0,0,0,0 [18-Aug-2005 10:15:02*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.4 [18-Aug-2005 10:15:02 ] Walking ifIndex for XXX.XXX.1.251:161 to resolve interface-index mapping [18-Aug-2005 10:15:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.4 Error and the lines leading up to it: [18-Aug-2005 10:15:05 ] Retrieved data for 1_0 (4): U,U,U,U,U,U [18-Aug-2005 10:15:05 ] Some data is missing for 1_0 (4). [18-Aug-2005 10:15:05 ] Retrieved data for 1_0 (4): U,U,U,U,U,U [18-Aug-2005 10:15:05 ] Some data is missing for 1_0 (4). [18-Aug-2005 10:15:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.5 [18-Aug-2005 10:15:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.5 Error and the lines leading up to it: [18-Aug-2005 10:15:05 ] Retrieved data for 1_1 (5): U,U,U,U,U,U [18-Aug-2005 10:15:05 ] Some data is missing for 1_1 (5). [18-Aug-2005 10:15:05 ] Retrieved data for 1_1 (5): U,U,U,U,U,U [18-Aug-2005 10:15:05 ] Some data is missing for 1_1 (5). [18-Aug-2005 10:15:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.6 [18-Aug-2005 10:15:06*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.6 Error and the lines leading up to it: [18-Aug-2005 10:15:06 ] Retrieved data for 1_2 (6): U,U,U,U,U,U [18-Aug-2005 10:15:06 ] Some data is missing for 1_2 (6). [18-Aug-2005 10:15:06 ] Retrieved data for 1_2 (6): U,U,U,U,U,U [18-Aug-2005 10:15:06 ] Some data is missing for 1_2 (6). [18-Aug-2005 10:15:06*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.7 [18-Aug-2005 10:15:06*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.7 I have looked on the WiKi, and not been able to locate any information on either of these issues. Any help would be greatly appreciated (including a link to a page I have missed..) The actual device is a Cisco 7204VXR. Joshua Sidwell, CISSP Perimeter Systems, Inc. Network Security Engineer (303) 552 - 5434 http://www.perisys.net <a href="http://www.spreadfirefox.com/?q=affiliates <http://www.spreadfirefox.com/?q=affiliates&id=0&t=1> &id=0&t=1">Get Firefox!</a> This email and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and may contain confidential and/or proprietary material. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Brainstorm-Newtorks. Finally, the recipient should check this email and any attachments for the presence of viruses. Brainstorm-Newtorks. accepts no liability for any damage caused by any virus transmitted by this email. Joshua Sidwell, CISSP Perimeter Systems, Inc. Network Security Engineer (303) 552 - 5434 http://www.perisys.net <http://www.perisys.net/> This email and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and may contain confidential and/or proprietary material. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Perimeter Systems, Inc. Finally, the recipient should check this email and any attachments for the presence of viruses. Perimeter Systems, Inc. accepts no liability for any damage caused by any virus transmitted by this email.

1 0

NAV 3 RC2 Foundry Switch Support
by kreide＠gmail.com 17 Aug '05

17 Aug '05

> Right now, I'm looking at a Foundry FES X424. It's a version of the > I see 39 SNMP OIDs listed. They are: All the info you gave me looks good and at least ports 1-7 and 24 (uplink I assume) should show up. Can you grep the getDeviceData.log file for 'dbfesx424-uunet3.be.weather.com' and give me the output, as well as any messages in the getDeviceData-stderr.log file? Hopefully this will give an indication on why the ports are not showing up. -- Kristian

1 0

[Nav-users] postgresql will not allow connections from software after ip-change
by BuleSari＠khio.no 16 Aug '05

16 Aug '05

Hi, postgresql will not allow connections from software/script after ip-change, I cannot figure out why. If I manually connect to postgresql it works fine. Here are to two transcripts from software output and from terminal output. Date: Tue, 2 Aug 2005 17:10:02 +0200 From: Cron Daemon <root(a)nav.admin.khio.no> To: root(a)nav.admin.khio.no Subject: Cron <navcron@nav> $BINDIR/thresholdMon.py >> $LOCALSTATEDIR/log/thresholdMon.log Traceback (most recent call last): File "/usr/local/nav/bin/thresholdMon.py", line 39, in ? conn = db.getConnection('thresholdmon','manage') File "/usr/local/nav/lib/python/nav/db/__init__.py", line 86, in getConnection connection = psycopg.connect('host=%s dbname=%s user=%s password=%s' % psycopg.OperationalError: could not connect to server: Connection refused Is the server running on host localhost and accepting TCP/IP connections on port 5432? Does anybody have an idea of why this is happening? Thanx in advance. Mvh Bulent Sarinc IT.-advisor at KHIO

1 0

NAV + External software
by kreide＠gmail.com 16 Aug '05

16 Aug '05

> Ah, yes, Arnold is the thing I read about. Can you tell me how to > contact John-Magne, or do you know if Arnold is available for download > (as stable or even development version)? I would definitely like to try Yes, it is available from our svn server: https://svn.itea.ntnu.no/repos/nav/navme/branches/post-3.0-features/subsyst… You can reach John-Magne at bredal(a)itea.ntnu.no for any questions, however, he might be on vacation currently. > the reasons you mentioned. We have already started using NAV instead of > Cisco Works for the most part. That is nice to hear. If you have time, please let us know how NAV is working for you and any issues you have with it and would like us to improve in a future version. -- Kristian

1 0

- ImportError: cannot import name Account
by Pete.Hoffswell＠davenport.edu 15 Aug '05

15 Aug '05

Hi Morten networker2:~ # python Python 2.3.3 (#1, Feb 5 2005, 16:46:56) [GCC 3.3.3 (SuSE Linux)] on linux2 Type "help", "copyright", "credits" or "license" for more information Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working. . >>> from nav.db.navprofiles import Account Traceback (most recent call last): File "<stdin>", line 1, in ? ImportError: cannot import name Account >>> Aditya Rajgarhia <arajgarh(a)iwu.edu> did mention software versions. Do you have any suggestions as to which packages I should maybe look at? -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 01/08/2005 13:21, Pete Hoffswell uttered: > I get this directly after restarting apache: > Mod_python error: "PythonHeaderParserHandler nav.web"Traceback (most > recent call last): File > "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in > HandlerDispatch result = object(req) File > "/usr/local/nav/lib/python/nav/web/__init__.py", line 45, in > headerparserhandler import nav.web.auth File > "/usr/local/nav/lib/python/nav/web/auth.py", line 34, in ? from > nav.db.navprofiles import Account, Accountnavbar, > NavbarlinkImportError: cannot import name Account Looks like more strange circular import problems, but we see none of those here. What happens if you start your python interpreter and just enter this line: "from nav.db.navprofiles import Account"? BTW; Please do not post HTML to the list (as mentioned on http://mailman.itea.ntnu.no/mailman/listinfo/nav-users) - although your mailer produces an alternative plaintext content, it mucks up the text formatting of the errors you quoted, making them harder to read. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFC7yjmXxIl0kpcOkQRAnTDAJ0TCSbcf/wyeLZBCkEa3GZHyhSgEwCgiWwa pSAvLPOd2TWzQaPea43KpLA= =aVRa -----END PGP SIGNATURE-----

1 0

Problems with getDeviceData
by kreide＠gmail.com 12 Aug '05

12 Aug '05

> I have added a wsc5505 to NAV, but NAV only detects 2 snmpoid's for the > switch. I have no problems with wsc2948, cat2950, wsc4006, cat4506, > cat295024G You can try to set the uptodate field in the netbox table to false to re-detect OIDs since it seems like the OID tester was not able to properly detect all OIDs. Use the following command: UPDATE netbox SET uptodate=false WHERE ip='<ip>'; We should probably add a link to the IP device center for re-testing OIDs for a device. -- Kristian

1 0

Problems with getDeviceData
by kreide＠gmail.com 12 Aug '05

12 Aug '05

> I also have a problem with a wsc5505. I have 3 5000-series Cisco switches, > two wsc5505 and one wsc5000. One wsc5505 and the wsc5000 run CatOS 5.5(20) > and seems to work well. The other wsc5505 run CatOS 5.5(14) and that one > gives me problems with the new RC2. It found the modules/ports and sw/hw > versions in RC1. Here is the last lines in the getDeviceData.log file: > Aug 09 09:28:41 2005 secretname-sw.hsh.no_03 QUERY_NETBOX_T03-6-RUN TimeoutException: Too many timeouts, giving up It seems there is some problem getting SNMP data from the device. You are sure the community string is correct? Upgrading the firmware might also help. -- Kristian

1 0

NAV doesn't show some data
by bertove＠gmail.com 11 Aug '05

11 Aug '05

Hi: I got nav installed and running for the most. However there is one feature that is important to me and I can't see it (although I'm sure it's there, probably my configuration is bad). When I track a machine by the mac address, I want to see which port of which router it is connected to, so that I can take off the machine immediately (physically) if I need to. RIght now, for example, I have a core switch 10.0.0.5 and there's a router 10.0.6.1 which is connected to the core. So if I track (by mac address) a machine connected to 10.0.6.1, nav tells me that it is connected to 10.0.0.5, which doesn't help me since I want to know the port on 10.0.6.1. By the way, data is being colected by cricket (I can see in the graphs). What could it be then? Is it due to wrong type selection for the ip devices? Regarding that, does it make a difference if I select GSW for all switches (SW and EDGE) ? Thanks!

2 1

NAV 3 RC2 Foundry Switch Support
by chouston＠gmail.com 11 Aug '05

11 Aug '05

Hi Guys, I am liking NAV quite a bit here, and would like to know how to get some of my Foundry stuff working a little better with it. For instance, I have a 7140 that currently (until next Tuesday morning) is providing gateways for a back-end network at a colocation facility. For it's directly connected networks, I can get MAC information in the machine tracker. This is highly cool. The design we have adopted as our standard since moving up to gigabit interconnections employs two Foundry FES X448 distribution switches running VRRP-E to float the gateway. The edge switches are connected to both of these distribution switches using 1q trunks, and the VLANs we extend to the edge are running spanning tree. The distribution swithces are connected back to a carrier network via /30 subnets, and routes are learned by them from the carrier using OSPF. In the machine tracker, I cannot search for MAC information for any of the networks owned by my Foundry switches. I can get DNS reverses, but not MACs. This would be a very cool and needed thing for us. Also, the EdgeIrons are in the database, but I get pretty much no information for them that I can find. No port information or anything. I am thinking the problems I am having are related to what SNMP information getDeviceData knows how to ferret out of the devices, but this may very well be the wrong impression to have. What information would I need to supply from either Foundry documentation, or NAV application logs that might help figure out how to fix this stuff? -- Later, Carlton Houston chouston(a)gmail.com

1 0

NAV 3 RC2 General Question
by chouston＠gmail.com 10 Aug '05

10 Aug '05

Hi All, First, I think this project has a great deal of potential, but it's merely a feeling at this point. I can't get much of anything to work. I have stopped getting python errors for the things I have been trying to get working. This without changing any code, just ironing out the details of how things should be installed, etc. I have added several switches, none of which were recognized types. These are: Foundry EdgeIron 24G-A (4) Foundry FastIron x448 Premium (2) Foundry EdgeIron 48G (1) Cisco 7140 (1) Again, this is just a few little things to start to get a feel for how things are supposed to work in NAV. I did snmp queries for the numeric value of the SysObjectID for each type, and with the exception of a difference in the 24 port edgeirons, I think because of a code revision, NAV was completely happy, and felt it recognized each box type as I added them. It was able to record the serial numbers on the edgeiron switches and the cisco 7140. I don't think the FES exposes the serial number via the console or SNMP. I get nothing in cricket at all, even though I think I have all the dependencies, etc. Until 4pm yesterday, I was getting this error in the getDeviceData.log file. It stopped mysteriously: getDeviceData.log:Aug 09 15:59:37 2005 getDeviceData_01 QUERY_NETBOX_T01-3-RUN Caught exception, should not happen: snmp/SNMPException Now I get this: Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-5-UPDATE_TYPES Num types: 33, num OIDs: 168, new oidQ: 0 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: wcuunet.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: twccore448-2.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: twccore448-1.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.23 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.21 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.22 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.24 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.25 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: wxcat2.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-5-UPDATE_NETBOXES Num netboxes: 9 (9 high, 0 new, 0 removed, 0 skipped, 0 runq, 0 active) That actually looks fine, except that I have no idea how to add an OID, and I am at a loss as to where to find documentation for it. I did a psql query on the snmpoid table, but I am unclear as to what OID I should throw in for, say, interface stats, and what response I am looking for. Any help here would be nice. Also, I get nothing but the java application with the refresh button, etc, on the vlanMap. How do I make that show stuff? There's also nothing at all listed in the network explorer. When I go into the manage devices thing, it sees all the boxes, but lists no modules for any of them. What does that mean? Any help with any of this would be greatly appreciated. -- Later, Carlton Houston chouston(a)gmail.com

2 1

Traffic Map shows nothing :/
by arajgarh＠iwu.edu 10 Aug '05

10 Aug '05

I've added a few IP devices and they show up fine. But when I click on the traffic map, all I see is the applet loading up (with the java logo). I wait but nothing happens. It's not the browser since I've tried from many computers. By the way, I'm using SSL. Any ideas? Thanks >From peder.sefland at hivolda.no Wed Aug 10 12:13:37 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Wed Aug 10 11:14:24 2005 Subject: [Nav-users] errors in alertprofil Message-ID: <s2f9e186.051(a)HVO-3.hivolda.no> When I enter the alertprofile I got these error Error creating header. navTemplate.py throws errors: Traceback (most recent call last): File "/usr/local/nav/bin/navTemplate.py", line 107, in ? main(sys.argv[1:]) File "/usr/local/nav/bin/navTemplate.py", line 79, in main print page File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 606, in respond write(filter(VFFSL(SL,"standardCSS",0)(), rawExpr='$standardCSS()')) # from line 101, col 1. File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 89, in standardCSS if VFFSL(SL,"user.preferences.hidelogo",1): NameMapper.NotFound: cannot find 'preferences' while searching for 'user.preferences.hidelogo' And there was no link to get back to the main-page of nav. I running nav3 rc2 on RHEL4 Peder Magne Sefland Avd. ingeni?r | Divisional Engineer IT-avd. | Computer Dep. H?gskulen i Volda | Volda University College Postboks 500 | Post Box 500 6101 VOLDA | N-6100 VOLDA | NORWAY 70075284 (kontor) | +4770075284 (Office) 90823914 (mob.) | +4790823914 (mobile)

2 1

Re: Error in installing nav on RHEL4
by roger.aas＠hsh.no 09 Aug '05

09 Aug '05

Hi Peder. Try editing /etc/selinux/config and setting SELINUX=disabled, then rebooting and test the same again. If it works it is SElinux that stops it from working. You could also try setting it to permissive, then you will only get audits about it but it should work. I see that there is no settings for the python-lib in the file /etc/selinux/targeted/contexts/files/file_contexts so that may be the reason it complains. - Roger Peder Magne Sefland wrote: > But I installed SUlinux and firewall. > > When I tried to access the webpage I get this error > > Mod_python error: "PythonHeaderParserHandler nav.web" > > Traceback (most recent call last): > > File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch > result = object(req) > > File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler > nav.web.auth.authenticate(req) > > File "/usr/local/nav/lib/python/nav/web/auth.py", line 90, in authenticate > conn = db.getConnection('navprofile', 'navprofile') > > AttributeError: 'module' object has no attribute 'getConnection' > > > And on the console I get even more errors > > # audit(1123578062.447.0): avc: denied { execute } for pid=1791 comm=httpd path=/usr/lib/python2.3/site-packages/psycopgmodule.so dev=dm-0 ino=489605 scontext=user_u:system_r:httpd_t tcontext=root:object_r:etc_t tclass=file

1 0

Error in installing nav on RHEL4
by peder.sefland＠hivolda.no 09 Aug '05

09 Aug '05

I have follow the instruction on http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 But I installed SUlinux and firewall. The installation went great, and when I run /usr/local/nav/bin/nav status everything is up and running. mactrace: Up cricket: Up eventEngine (pid 3020) is running... logengine: Up maintengine: Up servicemon.py (pid 3054) is running... smsd.pl (pid 3082) is running... thresholdMon: Up networkDiscovery: Up iptrace: Up safe_smsd: Up getDeviceData (pid 3114) is running... backup: Up pping.py (pid 3123) is running... Alertengine is running with process id 3156. It has been running for 0 minutes and 8 seconds. When I tried to access the webpage I get this error Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler nav.web.auth.authenticate(req) File "/usr/local/nav/lib/python/nav/web/auth.py", line 90, in authenticate conn = db.getConnection('navprofile', 'navprofile') AttributeError: 'module' object has no attribute 'getConnection' And on the console I get even more errors # audit(1123578062.447.0): avc: denied { execute } for pid=1791 comm=httpd path=/usr/lib/python2.3/site-packages/psycopgmodule.so dev=dm-0 ino=489605 scontext=user_u:system_r:httpd_t tcontext=root:object_r:etc_t tclass=file Peder Magne Sefland Avd. ingeni?r | Divisional Engineer IT-avd. | Computer Dep. H?gskulen i Volda | Volda University College Postboks 500 | Post Box 500 6101 VOLDA | N-6100 VOLDA | NORWAY 70075284 (kontor) | +4770075284 (Office) 90823914 (mob.) | +4790823914 (mobile)

1 0

AlertProfiles problem
by roger.aas＠hsh.no 09 Aug '05

09 Aug '05

I get this error when I go to Toolbox/AlertProfiles: Error creating header. navTemplate.py throws errors: Traceback (most recent call last): File "/usr/local/nav/bin/navTemplate.py", line 107, in ? main(sys.argv[1:]) File "/usr/local/nav/bin/navTemplate.py", line 79, in main print page File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 606, in respond write(filter(VFFSL(SL,"standardCSS",0)(), rawExpr='$standardCSS()')) # from line 101, col 1. File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 89, in standardCSS if VFFSL(SL,"user.preferences.hidelogo",1): NameMapper.NotFound: cannot find 'preferences' while searching for 'user.preferences.hidelogo' Also in the lower left corner I get this message both with FireFox and IE: StyleSheets Your Internet browser do not support style sheets. We reccomend using a browser which support style sheets with Alert Profiles. Someone know why I get this error? This is in RC2, I did not get this in RC1. - Roger -- Roger Aas Stord/Haugesund College

1 0

Can't add devices
by mhall＠newsstand.com 09 Aug '05

09 Aug '05

Matt Hall wrote: > Matt Hall wrote: > >> Matt Hall wrote: >> >>> try to: >>> >>>> stop nav >>>> psql manage >>>> delete from rrd_file where subsystem='cricket'; >>>> run makecricketconfig.pl as user navcron >>>> nav start >>>> >>>> >>> Done >>> >>>> >>>> >>>>> , or macs, it appears data is not being collected. > >>>>> >>>> >>>> >>>> >>>> >>>> What is getDeviceData.log telling you? >>>> >>>> >>>> >>> Guess I am still getting that error: >>> >>> Aug 08 14:38:01 2005 getDeviceData MAIN-5-INIT Running with 16 >>> threads (max) >>> Aug 08 14:38:01 2005 getDeviceData MAIN-3-INIT Could not connect to >>> database! >>> >>> This seems to look wrong, when I execute the nav startup script with >>> a status command I get the following: >>> >>> networkDiscovery: Up >>> cricket: Up >>> eventEngine does not seem to be running... >>> logengine: Up >>> maintengine: Up >>> servicemon.py (pid 2039) is running... >>> smsd.pl (pid 2050) is running... >>> thresholdMon: Up >>> mactrace: Up >>> iptrace: Up >>> safe_smsd: Up >>> getDeviceData does not seem to be running... >>> backup: Up >>> pping.py (pid 2079) is running... >>> Alertengine is running with process id 2089. >>> It has been running for 0 minutes and 31 seconds. >>> >>> Should I be worried that getDeviceData is no running? >>> >>> My path is showing correctly now in the cron jobs...Yeah!!! >>> >>> But I'm getting a notification from cron now that follows: >>> >>> Subject: smsd database connection problem >>> >>> >>> Status: 08.08.2005 14:54:04 PG_conn=SCALAR(0x8175b44) 1 >>> Reset >>> >>> Error was: >>> server closed the connection unexpectedly >>> This probably means the server terminated abnormally >>> before or while processing the request. >>> >>> >>> >>> I think I still have a path problem. I'm thinking the path still >>> isn't getting sourced in the startup script correctly. Maybe I >>> should change it from a bourne script to a bash script and use the >>> "source" command. >>> >>> Thanks for the help guys. >>> >>> Matt >>> _______________________________________________ >>> Nav-users mailing list >>> Nav-users(a)itea.ntnu.no >>> http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >> >> >> >> Just as an FYI I gave up and symbolically linked everything into >> /usr/local/jdk1.4.2/jre/lib/ext. >> Things seem to be working now, but I'm worried that I'll have problem >> with other environmental variables not being set. >> Any freebsd people here have suggestions on how to globally export >> this? I tried /etc/profile, but that doesn't seem to work since it >> isn't running with a login prompt. Freebsd has no /etc/profile.d and >> the only other option I can think of is using bash instead of sh in >> my startup scripts so that I can use the "source" statement instead >> of just using a ".". I'm not sure if this will work. > > > One step closer, now that the symlinks are inSQLException for update > statement: INSERT INTO swport > (swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) > VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') > org.postgresql.util.PSQLException: This statement has been closed. > at > org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Statement.java:2304) > > at > org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2Statement.java:432) > > at > org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:268) > > at no.ntnu.nav.Database.Database.update(Database.java:987) > at no.ntnu.nav.Database.Database.insert(Database.java:911) > at > no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(SwportHandler.java:217) > > at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) > at QueryNetbox.run(QueryNetbox.java:775) > place I get SQL Exeptions in the getDeviceData-stderr.log: > > Matt Sorry, here is the proper cut and paste job: One step closer, now that the symlinks are in place I get SQL Exeptions in the getDeviceData-stderr.log: SQLException for update statement: INSERT INTO swport (swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') org.postgresql.util.PSQLException: This statement has been closed. at org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Statement.java:2304) at org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2Statement.java:432) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:268) at no.ntnu.nav.Database.Database.update(Database.java:987) at no.ntnu.nav.Database.Database.insert(Database.java:911) at no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(SwportHandler.java:217) at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) at QueryNetbox.run(QueryNetbox.java:775) Matt >From arajgarh at iwu.edu Mon Aug 8 16:34:38 2005 From: arajgarh at iwu.edu (Aditya Rajgarhia) Date: Mon Aug 8 22:34:48 2005 Subject: [Nav-users] Can't add devices Message-ID: <966713.1123533278086.JavaMail.arajgarh(a)iwu.edu> I used to get those org.postgresql.jdbc2 errors. I messed with different versions of the jdbc postgresql drivers and it fixed those: http://jdbc.postgresql.org/download.html Put the jar file in the jre/lib/ext directory, try different versions maybe like I did. ------------------------------------------------------------------------ ---------------------------- >SQLException for update statement: INSERT INTO swport >(swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) >VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') >org.postgresql.util.PSQLException: This statement has been closed. > at >org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Sta tement.java:2304) > > at >org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2 Statement.java:432) > > at >org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2S tatement.java:268) > > at no.ntnu.nav.Database.Database.update(Database.java:987) > at no.ntnu.nav.Database.Database.insert(Database.java:911) > at >no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(Sw portHandler.java:217) > > at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) > at QueryNetbox.run(QueryNetbox.java:775) > > >Matt >_______________________________________________ >Nav-users mailing list >Nav-users(a)itea.ntnu.no >http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > ---------------- Aditya Rajgarhia 305 Kemp Hall x2042 arajgarh(a)iwu.edu >From arajgarh at iwu.edu Mon Aug 8 16:36:37 2005 From: arajgarh at iwu.edu (Aditya Rajgarhia) Date: Mon Aug 8 22:36:42 2005 Subject: [Nav-users] NullPointerException Message-ID: <4556391.1123533397154.JavaMail.lumadmin(a)my.iwu.edu> I get this in the getDeviceData-stderr.log whenever it tries to get data. Any clue? THanks java.lang.NullPointerException at no.ntnu.nav.getDeviceData.deviceplugins.StaticRoutes.StaticRoutes.proces sCiscoGw(StaticRoutes.java:261) at no.ntnu.nav.getDeviceData.deviceplugins.StaticRoutes.StaticRoutes.handle Device(StaticRoutes.java:127) at QueryNetbox.run(QueryNetbox.java:770) ---------------- Aditya Rajgarhia 305 Kemp Hall x2042 arajgarh(a)iwu.edu >From roar.pettersen at uib.no Tue Aug 9 09:21:41 2005 From: roar.pettersen at uib.no (Roar Pettersen) Date: Tue Aug 9 08:21:50 2005 Subject: [Nav-users] Can't add devices In-Reply-To: <42F7BAFF.9080506(a)newsstand.com> References: <200508081944.j78JiHHW039752(a)duke.cc.uit.no> <42F7B91F.4040502(a)newsstand.com> <42F7BAFF.9080506(a)newsstand.com> Message-ID: <Pine.GSO.4.61.0508090819190.24379(a)alf.uib.no> Hello ! > Any freebsd people here have suggestions on how to globally export this? I > tried /etc/profile, but that doesn't seem to work since it isn't running with > a login prompt. Freebsd has no /etc/profile.d and the only other option I > can think of is using bash instead of sh in my startup scripts so that I can > use the "source" statement instead of just using a ".". I'm not sure if this > will work. A good advise is to always use bash as shell and put the enviroment varibles in the eg .bash_profile : cat /root/.bash_profile export PYTHONPATH=/usr/local/nav/lib/python export JAVA_HOME=/usr/local/jdk1.4.2 export PATH=$PATH:/usr/local/nav/bin:/usr/local/jdk1.4.2/bin export PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib export CLASSPATH="`echo /usr/local/nav/lib/java/*.jar | tr ' ' ':'`:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/ja va/classes/snmp.jar" -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From Jan.Susegg at hint.no Tue Aug 9 10:10:54 2005 From: Jan.Susegg at hint.no (Susegg, Jan) Date: Tue Aug 9 09:08:54 2005 Subject: [Nav-users] Problems with getDeviceData Message-ID: <8A65B72C71E7484FBE1862045AAC5A8FB73B24(a)embla.ansatt.hint.no> Skipped content of type multipart/alternative

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users