- Nav-users - lister.unit.no

User default denied access to /tags/tagMultiSeries
by cthompson＠egf.mn 28 Sep '22

28 Sep '22

I have the Apache error.log filling with these message (had a full disk this morning), since upgrading from from 5.2 to 5.4 on Debian 10.13. This installation was first started in NAV 3.x era (2012) and continually upgraded and moved to different hardware a couple of times, so it is very possible there is junk in the configs that is no longer relevant [Tue Sep 27 08:48:55.649027 2022] [wsgi:error] [pid 541:tid 140035050575616] [remote 127.0.0.1:35090] [Tue Sep 27 08:48:55 2022] [WARNING] [pid=541 nav.web.auth] User default denied access to /tags/tagMultiSeries

2 1

NAV netmap
by Erik 09 Sep '22

09 Sep '22

Hi, Since upgrade to NAV5 my layer 3 view in Netmap is crashing? "Error loading graph, please reload the page" Cheers, Erik

2 1

NAV 5.0.0
by Erik 09 Sep '22

09 Sep '22

Hi, My partner in crime on this tool noticed that if he selects Layer 3 in Netmap the graph crashed with error loading page and has to refresh the page to get anything working again? Cheers Erik

2 1

portadmin at CISCO switch is not working
by klaus.pantleon＠voith.com 29 Aug '22

29 Aug '22

Hello, I have a problem with portadmin and CISCO switches. The portadmin is not showing any changable entries when I connect nav-portadmin to a cisco switch. Other brands like netgear, tp-link, hirschmann are working good. Sorry If I post the question to the wrong place. Please help me to find the right place to post. Best Regards, Klaus

3 3

nav 5.3 - alertengine not sending alert / blacklisted and connection timeout (error 110)
by Andrea Verni 26 Aug '22

26 Aug '22

Hi, I'm running NAV 5.3 and have issue with alertengine and email notifications. Email seems to remain stuck in the queue until I force a reboot of the VM. The error message I see in /var/log/nav/alertengine.log is: 2022-03-08 08:35:10,707 [WARNING] [nav.alertengine.alertaddress.send] Not sending alert 5824 ****** as handler Email is blacklisted: [Errno 110] Connection timed out 2022-03-08 08:35:10,716 [WARNING] [nav.alertengine.alertaddress.send] Not sending alert 5825 to ****** as handler Email is blacklisted: [Errno 110] Connection timed out 2022-03-08 08:35:10,720 [INFO] [nav.alertengine.check_alerts] 0 new alert(s), sent 0 alert(s), 910 queued alert(s), 0 alert(s) deleted, 910 failed send(s), 0 ignored However, by running a tcpdump I do not see any outbound/inbound connection to the configured email server. After the reboot it seems messages are going through (and I do see outbound connections to the configured mail server) 2022-03-08 08:39:38,277 [INFO] [nav.alertengine.alertaddress.send] alert 5367 sent by Email to ****** due to immediately subscription 2 2022-03-08 08:39:38,500 [INFO] [nav.alertengine.alertaddress.send] alert 5320 sent by Email to ****** due to immediately subscription 2 2022-03-08 08:41:34,963 [INFO] [nav.alertengine.check_alerts] 0 new alert(s), sent 910 alert(s), 0 queued alert(s), 0 alert(s) deleted, 0 failed send(s), 0 ignored I'm running Debian 10 and not have iptables/fail2ban on it. Any help? Thanks! Andrea

2 3

Announcement: NAV 5.4.0 released
by Morten Brekkevold 19 Mai '22

19 Mai '22

The initial feature release of the 5.4 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 10 (Buster) and 11 (Bullseye) are available in our APT repository [2] as usual. Please be extra aware of config file changes. Look out for `*.dpkg-dist` files in `/etc/nav` and make sure to update your running config. The virtual appliance will be updated automatically. Changed ======= - The changelog format has changed from the legacy format into one based on Keep a Changelog. - Transceivers are no longer classed as modules (#1154) - Generate more secure API tokens (#2366) - Remaining instances of "Uninett" in footer FAQ have changed to Sikt (#2367) - Upgrade to napalm 3.4.1 (#2403) Added ===== - Support more recent AKCP environment probes (#2107 - Collect and graph temperature readings from JUNIPER-MIB (#2342) - Add support for wildcards in report IN operator (a.k.a. (,,)) (#2347) - Get VLAN tag from Juniper chassis cluster redundant ethernet interface ("RETH") names (#2357) - Collect and graph memory usage from JUNIPER-MIB (#2359) - Document NAV's various command line utilities (#2368) - Add a contrib script to ship ISC DHCP server lease stats to NAV's Graphite instance (#2371) Fixed ===== - Don't display JavaScript alert dialog box when generating links to the current Geomap configuration (#1016) - Optimize SeedDB prefix listing queries (#2156) - Fix broken deletion of quick links from "My stuff"-menu (#2334) - Display friendlier Juniper RPC error reports in Portadmin (#2362) - Get rid of warning: CacheKeyWarning: Cache key contains characters that will cause errors if used with memcached (#2379) - Get rid of warning: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated (#2381) - Get rid of warning: django.contrib.postgres.fields.JSONField is deprecated. Support for it (except in historical migrations) will be removed in Django 4.0. (#2382) - Rotate room image thumbnails correctly based on EXIF orientation tag (#2385) - Fix Django JSONField import deprecation warnings (#2396) - Fix broken documentation build environment in Read The Docs (#2399) - Optimize SeedDB room listing queries (#2400) - Optimize SeedDB netboxtype listing queries (#2401) - Optimize SeedDB vlan listing queries (#2402) - Fix broken deserialization of Rack data (#2407) - Remove unnecessary quotation marks in SeedDB (#2416) - Fix incorrect handling of stateless event posting in internal APIs (#2417) Removed ======= - Remaining Python 2 compatibility code (#2319) - Dependency on the six Python module Release notes ============= We always advise you to have a look at NAV's accompanying release notes [3] before upgrading. Happy NAVing everyone! Links ===== [1] https://github.com/Uninett/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.readthedocs.io/en/latest/release-notes.html#nav-5-4 -- Sincerely, Morten Brekkevold Sikt – Norwegian Agency for Shared Services in Education and Research

1 0

Re: wrong Port configuration status for juniper device if port manually disabled
by FOUR Ludovic (EXT) 06 Apr '22

06 Apr '22

Hello, I just forgot to reply to all, my bad sorry I leave all the comments below I took a look into ipdevpoll.log When I'm updating a port, there is new [INFO schedule.netboxjobscheduler] line into ipdevpoll log, means that the scheduler is doing fine. I still have the same issue with portadmin enabled checkbox : if you uncheck enabled box, save, then reload page, the checkbox goes back to checked, and remains in this state. - but it updates the interface - (disabled) I've made some setup to portadmin.conf, and changed link_edit = false (better not cut the tree branch where you are sitting on) but I don't think it's related to. Regards, Ludovic ----- Mail original ----- De: "Morten Brekkevold" <morten.brekkevold(a)sikt.no> À: "FOUR Ludovic / PHA" <ludovic.four(a)unistra.fr> Envoyé: Vendredi 1 Avril 2022 14:39:19 Objet: Re: wrong Port configuration status for juniper device if port manually disabled On Thu, 31 Mar 2022 09:24:46 +0200 (CEST) "FOUR Ludovic (EXT)" <ludovic.four(a)unistra.fr> wrote: > I only disable the physical port in this case. Hi Ludovic, did you intentionally leave the mailing list out of your reply? > I did that, but there's no update even when I close Chrome or firefox > (did some tests on both). I tried by clearing firefox/chrome cache > too. The interface status still remains checked (enable) in portadmin > web page. Then I need to do some testing on our own equipment in an attempt to reproduce this. I'll have to get back to you. > I also have some update problem with aggregated interfaces (aeX) > created with Junos Console. NAV can detect the aeX interface when I > create it. But still remains when I remove it. I can't see the > physical interfaces that were previously members of the aggregated > interface in the physical ports list anymore. What ports NAV knows about is only updated by the inventory job, which runs every 6 hours. However, ipdevpoll does show some restraint from deleting any interface as soon as it appears missing (some devices can be wonky) - it actually marks it internally with a "missing since" timestamp, and removes it only when it remains missing after certain amount of time. I don't recall the exact amount, but I'm guessing 24 hours. > Maybe a SSL cache issue on server side ? > I'm using standard apache mod ssl settings > SSLSessionCache shmcb:${APACHE_RUN_DIR}/ssl_scache(512000) > SSLSessionCacheTimeout 300 No, this is unrelated to content caching. -- Sincerely, Morten Brekkevold Sikt – Norwegian Agency for Shared Services in Education and Research

2 1

wrong Port configuration status for juniper device if port manually disabled
by FOUR Ludovic (EXT) 30 Mar '22

30 Mar '22

Hello, I found a problem wih NAV portadmin configuration page for Juniper EX series I ran wildcard changes to unused interfaces, and I disabled them manually with junos set command [ set interfaces <port number> disable ] However, in the NAV portadmin page configuration, the port status of those interfaces is still enabled. (checkbox checked) Interface => NAV: enabled / JunOS: disabled When I uncheck the enable checkbox, and save changes, the NAV portadmin page show disabled, and the port is still disabled in junos console. Interface => NAV: disabled / JunOS: disabled If enable and save changes again into NAV, and the port is next enabled in console. Interface => NAV: enabled / JunOS: enabled If I manually update the interface description with junos set command, and update NAV portadmin page, the description field is updated. Does NAV run netconf or snmp checkings before showing the portadmin page, or it does only rely on last database readings for portadmin state ? It makes some confusion, because we think the interface is enabled and working into NAV portadmin page, but it's not in reality. Regards, Ludovic FOUR SSI DR10 CNRS - Support Infoprox Pharma FRANCE

2 1

NAV (Network Administration Visualized) user discussions, questions and help
by Robert2 Wu 鄔忠慈 #8051 15 Mar '22

15 Mar '22

Hi We are use HPE Aruba 6300 switch in our company. When I use standard SNMP port 161 to query it will unsuccessful. I check device snmp agent port is 162. Where/How can I make a management profile and use port 162. Thanks Robert Wu robert2.wu(a)mpi.com.tw<mailto:robert2.wu@mpi.com.tw> ********************************************************************************************************** 本郵件及其附件(下稱本郵件)可能包含有旺矽公司機密資訊，非指定之收件者。請勿使用或揭露本信件內容，請立即通知寄件人並請銷毀此信件。 ************************************** Email Confidentiality Notice ************************************** This email may contain confidential information. Please do not use or disclose it in any way it if you are not the intended recipient. If you have received the e-mail in error, please notify us immediately by returning it to the sender and then delete it . **********************************************************************************************************

2 1

Announcement: NAV 5.3.0 released
by Morten Brekkevold 04 Mar '22

04 Mar '22

The initial feature release of the 5.3 series of NAV is now out! The source code is available for download at GitHub [1]. A new package for Debian 10 (Buster) is available in our APT repository [2] as usual. Packages for Debian 11 (Bullseye) have not been built yet. Please be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance will be updated as soon as possible. Changes ======= On January 1st 2022, Uninett, NSD and Unit (all entities owned by the Norwegian government) were merged into the new governmental agency *Sikt - Norwegian Agency for Shared Services in Education and Research*. This marks the first release of NAV under the new name. User-visible features and improvements: The main reason for this new feature release is to ensure NAV is compatible with Python 3.9 (which is the default Python version on the current Debian stable distro, Bullseye). Features that were already lurking in the pipeline are: * #2245 (Link to room details page from SeedDB room edit page) * #2274 (Hidden attributes for devices) * #2323 (Completely hide all attributes starting with "__") * #2309 (Support a report.conf.d/ style config directory for reports) * #2311 (Wishlist: Info about locations visible via /report/location) Other fixed GitHub issues in this release: * #2280 (Only ethernetCsmacd interfaces are shown in the room viewer) * #2310 ([BUG] snmptrapd plugins crash when posting events in NAV 5.2) * #2315 (Properly upgrade to Django 2.2) * #2316 (Upgrade dependencies that will need a newer version to run on Django 3.2 or later) * #2317 (Upgrade Django to 3.2) * #2321 (Also list local conf reports in report widget) * #2324 ([BUG] Example severity rules distributed with NAV 5.2.1 do not actually work) * #2328 (Remove "no access" message from login page during normal login) * #2329 (Upgrade to dnspython 2.1) * #2341 (Warn when database config isn't readable) * #2352 (Fix Python 3.9 compatibility) * #2353 (Document the name change from Uninett to Sikt) * #2355 (Add Sikt to About page, copyrights and graphical profile) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/Uninett/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.readthedocs.io/en/latest/release-notes.html#nav-5-3 -- Sincerely, Morten Brekkevold Sikt – Norwegian Agency for Shared Services in Education and Research

1 2

NAV - Palo Alto ARP table import for Machine Tracer
by Mehmet E. Şahin (BAŞKANLIK-BİDB) 28 Jan '22

28 Jan '22

Hi Everyone, We have NAV to monitor network switches and also Palo Alto Firewall. We can only use Palo Alto api to query its arp table as it does not support it over snmp. Could there be a way to import those ARP records from palo alto firewall to NAV periodically ? We are asking this because the machine tracer tool on NAV is very useful and would be great if those arp recods from palo alto to be imported to the NAV. Best Regards Mehmet Emin Şahin

4 6

Power Distribution MIBs
by Simon Brown 11 Jan '22

11 Jan '22

Hello, Nav has a Power distribution equipment category. Is there any guidance on what is supported by default? Is there a standard MIB lik IF-MIB or is this all vendor specific? Thanks, Simon -- Simon Brown System Engineer EISCAT Scientific Association P. O. Box 812, SE-981 28 Kiruna, Sweden simon.brown(a)eiscat.se

1 0

Snmp V3
by Marco BARBIERI 21 Des '21

21 Des '21

Hi, is there any news about snmp v3 support in NAV? I know it's something that has already been asked, but as far as i can see it isn't supported yet, i'm i wrong? Best regards, Marco Barbieri, -- -- Marco Barbieri - Si.RS Reti e Sistemi - 0592058003 - 3316213040

2 3

How to add sensorgateway probes to nav ?
by FOUR Ludovic (EXT) 17 Des '21

17 Des '21

Hello, I'm using NAV 5.2 and I would like to add a couple of Serverscheck temperature probes that monitor our network racks Product reference is detailed here : https://serverscheck.com/sensors/baseunit.asp I'm trying to add the probes by following the adding AKCP probe tutorial. I made this : 1/ Translate the sensorgateway.mib into SERVERSCHECK-MIB.py with smidump command 2/ Copy the python file to folder /opt/venvs/nav/lib/python3.7/site-packages/nav/smidumps There's a ServersCheck module used in MIB file, that i'm using to interrogate directly the probe I can get the temperature value with snmpwalk -c community -v1|2c <IP of the probe> ServersCheck:sensor1Name.0 If I translate into OID with snmptranslate command, I get this OID .1.3.6.1.4.1.17095.3.2.0 3/ Create the file serverscheck_mib.py with those lines to /opt/venvs/nav/lib/python3.7/site-packages/nav/mibs from twisted.internet import defer from nav.mibs import reduce_index from nav.mibs.mibretriever import MibRetriever from nav.smidumps import get_mib class ServerCheckMib(MibRetriever): mib = get_mib('SERVERSCHECK-MIB') @defer.inlineCallbacks def get_all_sensors(self): result = [ { 'oid': '.1.3.6.1.4.1.17095.3.2.0', 'unit_of_measurement': 'celsius', 'precision': 1, 'scale': None, 'description': "Ambient temperature", 'name': "Ambient temperature", 'internal_name': "Ambient temperature", 'mib': 'SERVERSCHECK-MIB', } ] defer.returnValue(result) - Add the following lines to /etc/nav/ipdevpoll.conf (note sure of iana code of serverscheck manufacturer. should be 25432) 25432 = ServersCheckMib SERVERSCHECK = SERVERSCHECK-MIB At this point i'm stuck (ipdevpoll log empty) and I still can't get sensors readings into NAV and it doesn't recognize the probe type into collected info of the seedDB probe page Any ideas of what I'm doing wrong ? Regards, Ludovic FOUR SSI DR10 CNRS - Support Infoprox Pharma 74, route du Rhin F-67401 Illkirch-Graffenstaden Tel: 03 68 85 43 11 Contact support: support-pharma(a)unistra.fr Tel: 03.68.85.42.50 - Mobile: 06.11.69.03.65

2 1

advice on upgrading nav 4.9.5 on debian 8.11 to nav 5.3 ideally debian 11
by Mischa Diehm 10 Des '21

10 Des '21

Hei all, we have a larger NAV setup with a bit more than 1000 Cisco Switches and use quite a lot of the features supported in NAV. Since our setup is a bit dusty we plan to upgrade (nav 4.9.5 on debian 8.11 to nav 5.3 ideally debian 11). I wanted to ask for your advice on the upgrade paths possible. We use a external db server that hosts the postgres db. Requirements/Whishes: - it would be great to keep the devices history and graphs so a simple dump.py and reinstall would be a bit lossy - it would be nice to start with a fresh installed debian 11. Is there a good/preferred path that we could follow? Thanks for any ideas and suggestions, Mischa p.s.: Any ideas / timeframe when nav will release debian 11 packages? -- narrowin.ch /\ network & security

3 2

wsgi throwing errors when talking with ldap-server
by Ingeborg Hellemo 04 Nov '21

04 Nov '21

NAV 5.1.2 I had to upgrade the OS on my NAV-box, and hence all the software depending on libraries. After this I have wsgi throwing errors on me. Not all the time. Users local to NAV can log in just fine, but users who authenticate via ldap gets the error. I have tried to reinstall psycopg2. I have also switched from installing mod_wsgi from an OS-package to using pip Apache/2.4.51 (FreeBSD) OpenSSL/1.1.1l mod_wsgi/4.9.0 Python/3.7 The error is not connected to communication with the ldap-server (AD) Output with debug=true in webfront.conf ldap_create ldap_url_parse_ext(ldaps://XXXX.ad.uit.no:636) ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP XXXX.ad.uit.no:636 ldap_new_socket: 18 ldap_prepare_socket: 18 ldap_connect_to_host: Trying 129.242.xx.zzz:636 ldap_pvt_connect: fd: 18 tm: -1 async: 0 attempting to connect: connect success [Tue Nov 02 08:53:35.941429 2021] [wsgi:error] [pid 34769] [client 129.242.14.106:49209] Truncated or oversized response headers received from daemon process 'NAV': /usr/local/lib/python3.7/site-packages/nav/wsgi.py, referer: https://nav.uit.no/index/login/?origin=/&noaccess [Tue Nov 02 08:53:35.977367 2021] [core:notice] [pid 34758] AH00052: child pid 34760 exit signal Segmentation fault (11) Any ideas? --Ingeborg -- Ingeborg Østrem Hellemo -- ingeborg.hellemo(a)uit.no Dep. of Information Technology --- Univ. of Tromsø

1 1

Announcement: NAV 5.2.1 released
by Morten Brekkevold 23 Sep '21

23 Sep '21

The first maintenance release of the 5.2 series of NAV is now out! This release fixes a particularly nasty regression bug in pping, which would prevent you from being alerted about boxDown events. If you are already running 5.2.0, we recommend that you upgrade as soon as possible. The source code is available for download at GitHub [1]. A new package for Debian 10 (Buster) is available in our APT repository [2] as usual. Packages for Debian 11 (Bullseye) have not been built yet. Please be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance has been updated. Changes ======= * #2304 (Display alert severity values in the event/alert details page) * #2306 ([BUG] pping is unable to report unreachable devices in NAV 5.2.0) * #2308 ([BUG] Alert Profile severity filters that ship with NAV are outdated) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/Uninett/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.readthedocs.io/en/latest/release-notes.html#nav-5-2 -- Sincerely, Morten Brekkevold Uninett

1 0

Announcement: NAV 5.2.0 released
by Morten Brekkevold 16 Sep '21

16 Sep '21

The initial feature release of the 5.2 series of NAV is now out! The source code is available for download at GitHub [1]. A new package for Debian 10 (Buster) is available in our APT repository [2] as usual. Packages for Debian 11 (Bullseye) have not been built yet. Please be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance has been updated. Changes ======= User-visible features and improvements: * #1928 (Document 802.1X support of PortAdmin for end users) * #2289 (Add config option to disallow editing of uplinks and downlinks in PortAdmin) * #2295 (Redefine alert severity levels and make them configurable) * #2297 (Document the event and alert type hierarchy) Fixed GitHub issues in this release: * #2296 ([BUG] Portadmin save API incorrectly returns 500 error where 400 is appropriate) * #2298 ([BUG] PortAdmin RpcError on JunOS 20 and newer) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/Uninett/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.readthedocs.io/en/latest/release-notes.html#nav-5-2 -- Sincerely, Morten Brekkevold Uninett

1 0

LDAP / ActiveDirectory issues
by Andrea Verni 02 Sep '21

02 Sep '21

Hi, I deployed NAV 5.14 on a debian 10 VM and configured LDAP authentication as from https://nav.readthedocs.io/en/latest/reference/ldap.html?highlight=ldap - however if using LDAP the login works randomly (need to try 2 to 5/6 time to login) while LDAPS never works. I did a test with ldapsearch on the same VM using both LDAP and LDAPS and both works so no issues with basedn or manager credentials nor with certificates. Is anyone else experiencing the same issue ? Other LDAPS based applications we use internally sucessfully connect to same AD servers. Anyone can help maybe? Thanks! Andrea

2 2

NAV (Network Administration Visualized) user discussions, questions and help
by Vuk Kadija 17 Aug '21

17 Aug '21

Hello NAV guys, We are using NAV for some time. Right now we have some FS switches in the test and we noticed we can't read some of the stuff from switches like CPU, temperature or power. They have sent us _*Tem:1.3.6.1.4.1.52642.2.1.45.1.1.11.1.3 Power:1.3.6.1.4.1.52642.2.1.45.1.1.6.1.3*_ Is there a way we can add these values to NAV so the system can read these values for CPU, temerature etc. Could not find it on the documentation, maybe missed it. Tnx in advance, Vuk _**_ -- Vuk Kadija Aginion S.A. 25, Rue de Beyren, LU-5376 Uebersyren Mobile: +381641218456 Helpdesk: (Mo-Sa 07:00 - 19:00, Su 08:00 - 15:00 CET/CEST) Tel: +352 2740 5949 | E-Mail: helpdesk(a)aginion.com R.C.S. Luxembourg B 193 336 Director: Benjamin Reiter Data Protection Notice: Unless you specifically oppose to it, by replying to this e-mail you explicitly consent to the processing of the personal data included or attached to this e-mail in accordance with our privacy policy which is available on http://aginion.com/dp

2 1

Update link in documentation
by Ingeborg Hellemo 11 Aug '21

11 Aug '21

Received the following: "Just letting you know that you have an outdated link here - https://nav.uit.no/doc/reference/geomap.html It?s to the Firebug download page which is now defunct - http://getfirebug.com/ We?ve put together a list of our 10 favorite javascript debugging tools (essentially a list of alternatives to Firebug!), perhaps you could point people to this? Here?s the link - https://www.pcwdld.com/firebug-alternatives-javascript-debugg ing-tools Should prove useful for anyone missing Firebug! " Guess this should be fixed in the main branch. --Ingeborg -- Ingeborg Østrem Hellemo -- ingeborg.hellemo(a)uit.no Dep. of Information Technology --- Univ. of Tromsø

2 1

pping don't see boxes up again
by Davide Miccone 02 Aug '21

02 Aug '21

Hello, 1) a box went down because unreachable (VPN down for several minutes) - pping detect box down 2) box come up (VPN up again) - pping don't detect box up I need to execute "nav restart pping" to see all the boxes up again. What I'm missing? Thank you for any suggestion Davide.

2 1

Announcement: NAV 5.1.4 released
by Morten Brekkevold 24 Jun '21

24 Jun '21

The fourth maintenance release of the 5.1 series of NAV is now out! The source code is available for download at GitHub [1]. A new package for Debian 10 (Buster) is available in our APT repository [2] as usual. Packages for Debian 9 (Stretch) have been discontinued. Please be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance will be updated shortly. Changes ======= Fixed GitHub issues in this release: * #2281 ([BUG] Saving alert permissions crashes Alert Profiles) * #2282 (PortAdmin SNMP error handling is broken in several ways) * #2284 ([BUG] IP device interfaces don't get updated with speed information) * #2285 (Extract Cisco PoE port mapping method) * #2288 (Disable the PortAdmin "Enable" checkbox for interfaces that aren't editable) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/Uninett/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.readthedocs.io/en/latest/release-notes.html#nav-5-1 -- Sincerely, Morten Brekkevold Uninett

1 0

Announcement: NAV 5.1 released
by Morten Brekkevold 02 Jun '21

02 Jun '21

The initial feature release of the 5.1 series of NAV is now out! The source code is available for download at GitHub [1]. A new package for Debian 10 (Buster) is available in our APT repository [2] as usual. Packages for Debian 9 (Stretch) have been discontinued. Please be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance will be updated shortly. Changes ======= User-visible features and improvements: * #2021 (Add SeedDB action to clone netboxes and rooms) * #2051 (Link to affected devices in Management profile) * #2128 (Add device filtering options to ipdevpoll and pping, to enable support for horizontal scaling and distributed monitoring) * #2175 (Implement NAPALM management profiles and connectivity) * #2185 (Modernize the type dumping script and make it available as an installable script for end user use) * #2204 (Add support for configuring Juniper switch ports in PortAdmin) - #2173 (Clean up PortAdmin ManagementHandler interface) - #2112 (Refactor PortAdmin's SNMP back-end classes and factories) - #2115 (Refactor portadmin configuration parsing bits) - #2121 (Use nav.config.NAVConfigParser for PortAdmin configuration) - #2205 (Adapt Portadmin UI workflow to meet needs of multiple backend protocols) Fixed GitHub issues in this release: * #2078 ([BUG] NAV daemons are unnecessarily run as root) * #2103 (Support Django 2.2) * #2139 ([BUG] fanState and psuState e-mail alerts say "no message template is defined") * #2141 (Work around lack of entity names when collecting sensors from Arista devices) * #2174 ([BUG] PortAdmin never issues a "write mem" operation when editing trunks) * #2190 ([BUG] Regression - mysql service check does not work) * #2197 ([BUG] Bottom part of room images are obscured by image caption) * #2198 ([BUG] CSV export from Netbox interfaces in Room view produce wrong filename and content.) * #2199 (Make servicemon HttpChecker use the port number from the URL, if present) * #2207 (Netbox reference is not passed to customization template for the ipdevinfo "What if" tab) * #2213 ([BUG] NAV does not import room position) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/latest/release-notes.html#nav-5.1 -- Sincerely, Morten Brekkevold Uninett

2 4

Install Error
by Colton Conor 29 Apr '21

29 Apr '21

I am trying to test NAV using the virtual machine. However when I import into EXSI V7, I get the following error message in EXSI: Line 16: Missing child element 'VirtualHardwareSection'.

2 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users