- Nav-users - lister.unit.no

NAV docs and papers
by Eduardo Hartmann 25 Mar '19

25 Mar '19

2 1

How to limit historical data (trends)?
by c5244714＠gmail.com 20 Mar '19

20 Mar '19

Hello, I'm using NAV 4.9.3 and have a big issue with the trend of interface traffic historical data(trend). I configured to monitor over 100 cisco switches and +2000 interfaces and the trend is consuming lot of data and deplete my storage space. the historical is a great feature with a 1 year history but its too much for us with our limited resources. My question is if there is anyway to control or limit the period of the data , lets say only 2 weeks with retention Thanks Dan

2 1

Upgrade instruction from 4.9.2 to 4.9.3
by c5244714＠gmail.com 19 Mar '19

19 Mar '19

Hello.I'm using NAV version 4.9.2 and need your detail instruction about how to actually perform the upgrade. user guide would be great Thanks in advance Dan

2 1

Setup mail server to send alert messages
by c5244714＠gmail.com 19 Mar '19

19 Mar '19

Hello, I'm using NAV version 4.9.2 and want to use the alert message vi e-ail but dont know how to setup the mail server/smtp. Please advice with any step guide or detail instruction Thanks Dan

2 1

Announcement: NAV 4.9.3 released
by Morten Brekkevold 28 Feb '19

28 Feb '19

The third maintenance release of the 4.9 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 8/9 (Jessie/Stretch) are available in our APT repository [2] as usual. The Debian packages for NAV 4.9 have been rebuilt using dh-virtualenv, which means that most of the Python dependencies are now embedded into the packages themselves. If you have previously added a priority apt pin for packages from apt.uninett.no, you may now remove it, as there are no longer any other packages needed from that repository to run NAV. Please also be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance currently being updated at the time of this writing, and will be uploaded soon. Changes ======= * #757 (devicehistory search by date ignores date) * #1792 (Precision of several Eaton/MGE UPS sensors are wrong) * #1812 (Malformed subid on (old) thresholdState events can cause status page and alert API endpoints to crash) * #1818 (Update ENTITY-MIB definition to RFC 6933) * #1855 (IPAM subnet suggest function is broken) * #1856 (Geomap doesn't work in NAV 4.9) * #1857 (E-mailing of business report subscriptions doesn't work) * #1862 (Please add case-insensitive matching on interface names in ipdevinfo queries for 'ifname') * #1865 (Servicemon resource leak causes all services to be reported as down) * #1871 (Alert detail headers are not present in e-mail notifications from AlertEngine) Please see the release notes [4] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://github.com/UNINETT/nav/issues [4] https://nav.uninett.no/doc/latest/release-notes.html#nav-4-9 -- mvh Morten Brekkevold Uninett

1 0

Fresh Install on Debian -> Graphite Unreachable
by Bothe, Mathias 20 Feb '19

20 Feb '19

Hello, i made a fresh nav installation on a fresh Debian 9 system. I installed the nav package by following the instructions here: https://nav.uninett.no/install-instructions/#debian After that I followed the instructions in /usr/share/doc/nav/README.Debian<https://raw.githubusercontent.com/Uninett/nav-debian/master/README.Debian> I skipped Part1, I did Part 2 to 6 as described. At point 4 Graphite, I followed https://nav.uninett.no/doc/latest/intro/install.html#integrating-graphite-w… I added the storage-*.conf files with symlink as described here: https://nav.uninett.no/doc/latest/howto/installing-graphite-on-debian.html Now I can Login into NAV, but Graphite is unreachable. So I have a few questions: Do i have to uncomment in file /etc/nav/graphite.conf? [carbon] # # NAV supports Carbon's UDP line receiver. Host and port information of # the backend can be configured in this section. # #host = 127.0.0.1 #port = 2003 [graphiteweb] # # Where is the Graphite web interface located. NAV needs this to get graphs # and data from Graphite. # #base=http://localhost:8000/ Do I have to create the graphite database and the apache webinterface by myself? As described here: https://nav.uninett.no/doc/latest/howto/installing-graphite-on-debian.html For me the installation instructions are not really clear and seem uncomplete. Can anyone help me? Cheers Mathias

2 6

Re: Multiprocess don't work
by Biselx Nicolas 18 Feb '19

18 Feb '19

Hi Morten, Thank you, sorry for the inconvenience. I had to find that myself :-( Regards Nicolas Le 18.02.19 à 08:55, Morten Brekkevold a écrit : > On Fri, 15 Feb 2019 15:09:10 +0100 Biselx Nicolas <nicolas.biselx(a)epfl.ch> wrote: > >> I enabled multiprocessing with the -m option in >> /etc/nav/init.d/ipdevpoll but that does not seem to work anymore with >> version 4.9.2 >> >> There is only one process that starts. >> >> Can anyone help me ? > Hi Nicolas, > > Please review the release notes for NAV 4.9: > > https://nav.uninett.no/doc/latest/release-notes.html#changed-daemon-startup… >

1 0

Multiprocess don't work
by Biselx Nicolas 15 Feb '19

15 Feb '19

Hello, I enabled multiprocessing with the -m option in /etc/nav/init.d/ipdevpoll but that does not seem to work anymore with version 4.9.2 There is only one process that starts. Can anyone help me ? Regards Nicolas

1 0

Announcement: NAV 4.9.2 released
by Morten Brekkevold 14 Feb '19

14 Feb '19

The second maintenance release of the 4.9 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 8/9 (Jessie/Stretch) are available in our APT repository [2] as usual. The Debian packages for NAV 4.9 have been rebuilt using dh-virtualenv, which means that most of the Python dependencies are now embedded into the packages themselves. If you have previously added a priority apt pin for packages from apt.uninett.no, you may now remove it, as there are no longer any other packages needed from that repository to run NAV. Please also be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance currently being updated at the time of this writing, and will be uploaded soon. Changes ======= User-visible features and improvements: * #1837 (Save config to non volatile memory in portadmin for dell switches) * #1853 (The navuser command should have an option to verify a user's passord) Fixed GitHub issues in this release: * #1784 (Breadcrumb missing from /useradmin/tokens/) * #1834 (AlertEngine fails to send email if EMAIL_PORT is present in nav.conf) * #1839 (The interfaces API endpoint crashes when using the last_used filter) * #1841 (Useradmin Token listing crashes on NAV 4.9.1 if any tokens are created with no endpoint list) * #1842 (Netmap layer 3 graph API endpoint crashes on NAV 4.9.1) * #1844 (PortAdmin crashes with TypeError if an ifaliasformat is configured) * #1846 (IPAM fails under NAV 4.9.1 if any Organization object has non-ASCII characters in description) * #1847 ("Rooms with active alerts" widget fails under NAV 4.9.1) * #1848 (Stateless alerts are shown in status widget even when checkbox is left unchecked) * #1851 (Fix searching for other things than ip addresses in portadmin) * #1852 (Empty NAVbar search results in ValueError crash) Please see the release notes [4] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://github.com/UNINETT/nav/issues [4] https://nav.uninett.no/doc/latest/release-notes.html#nav-4-9 -- mvh Morten Brekkevold Uninett

1 0

AlterEngine not sending mails anymore
by René Romijn 12 Feb '19

12 Feb '19

Updated to NAV 4.9.2. Now i noticed the alerts are not sending anymore. The last log i got was this: [2019-02-08 19:18:39,774] [ERROR] [pid=24794 nav.alertengine.alertaddress.send] Unhandled error from Email (the handler has been blacklisted) Traceback (most recent call last): File "/opt/venvs/nav/local/lib/python2.7/site-packages/nav/models/profiles.py", line 373, in send self.type.send(self, alert, language=lang) File "/opt/venvs/nav/local/lib/python2.7/site-packages/django/utils/decorators.py", line 145, in inner return func(*args, **kwargs) File "/opt/venvs/nav/local/lib/python2.7/site-packages/nav/models/profiles.py", line 439, in send return dispatcher.send(*args, **kwargs) File "/opt/venvs/nav/local/lib/python2.7/site-packages/nav/alertengine/dispatchers/email_dispatcher.py", line 52, in send email.send(fail_silently=False) File "/opt/venvs/nav/local/lib/python2.7/site-packages/django/core/mail/message.py", line 303, in send return self.get_connection(fail_silently).send_messages([self]) File "/opt/venvs/nav/local/lib/python2.7/site-packages/django/core/mail/backends/smtp.py", line 100, in send_messages new_conn_created = self.open() File "/opt/venvs/nav/local/lib/python2.7/site-packages/django/core/mail/backends/smtp.py", line 58, in open self.connection = connection_class(self.host, self.port, **connection_params) File "/usr/lib/python2.7/smtplib.py", line 256, in __init__ (code, msg) = self.connect(host, port) File "/usr/lib/python2.7/smtplib.py", line 316, in connect self.sock = self._get_socket(host, port, self.timeout) File "/usr/lib/python2.7/smtplib.py", line 291, in _get_socket return socket.create_connection((host, port), timeout) File "/usr/lib/python2.7/socket.py", line 553, in create_connection for res in getaddrinfo(host, port, 0, SOCK_STREAM): error: getaddrinfo() argument 2 must be integer or string And if i look at my alterengine log, i see the handler is being blacklisted: 2019-02-11 11:35:09,993 [WARNING] [nav.alertengine.alertaddress.send] Not sending alert 16646 to ***** as handler Email is blacklisted: getaddrinfo() argument 2 must be integer or string How to resolve this? Kind regards, René.

2 2

Announcement: NAV 4.9.1 released
by Morten Brekkevold 07 Feb '19

07 Feb '19

The first maintenance release of the 4.9 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 8/9 (Jessie/Stretch) are available in our APT repository [2] as usual. The Debian packages for NAV 4.9 have been rebuilt using dh-virtualenv, which means that most of the Python dependencies are now embedded into the packages themselves. If you have previously added a priority apt pin for packages from apt.uninett.no, you may now remove it, as there are no longer any other packages needed from that repository to run NAV. Please also be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance currently being updated at the time of this writing, and will be uploaded soon. Changes ======= Fixed GitHub issues in this release: * #1820 (ipdevpoll will not schedule jobs under NAV 4.9.0) * #1822 (Command line argument support for nav daemon startup config) * #1823 (Old switch port layout screen is blank in NAV 4.9.0) * #1824 (navdump crashes when dumping service table) * #1825 (Alertprofiles crashes when attempting to delete matchfield) * #1826 (Device history crashes when attempting to browse the history of an IP Device) * #1827 (Any l2trace search will crash with a Django FieldError) * #1828 (PDU dashboard widget crashes under NAV 4.9.0) * #1829 (Any toolbox descriptor file containing superfluous equal signs will be silently ignored by the web interface) * #1830 (MAC address prefix filters are horribly slow in arp and cam API endpoints) * #1831 (Threshold monitor crashes if rule returns Graphite error) Please see the release notes [4] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://github.com/UNINETT/nav/issues [4] https://nav.uninett.no/doc/latest/release-notes.html#nav-4-9 -- mvh Morten Brekkevold Uninett

1 0

Dell N2048P not saving
by Vinsonnaud Ludovic 07 Feb '19

07 Feb '19

Hello, When I use portadmin on a Dell N2048P, I change a port description for example and I clic on save. It say ok for change and ok for save very quickly. If I connect on the switch, the change is ok in the running-config, but when I check the startup-config, the change isn't done. I wait a few minutes and still no change. It is working well on Cisco 2960 and 3750 (despite sometimes it's slow if the stack is 8 switch) Can you help me find where is the problem ? Regards, -- Cordialement, IOGS Logo <https://www.institutoptique.fr> *Ludovic Vinsonnaud * - Ingénieur Réseau basé à Bordeaux, bureau F108 (IOA, Rue François Mitterrand, 33400 Talence) *Institut Optique Graduate School* 2 Avenue Augustin Fresnel - 91127 PALAISEAU Cedex Tel. +33 5 57 01 71 52 - Mob. +33 6 08 08 41 05

2 11

Announcement: NAV 4.9.0 released - now under GPLv3 license
by Morten Brekkevold 06 Feb '19

06 Feb '19

The initial feature release of the 4.9 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 8/9 (Jessie/Stretch) are available in our APT repository [2] as usual. The Debian packages have been rebuilt using dh-virtualenv, which means that most of the Python dependencies are now embedded into the packages themselves. If you have previously added a priority apt pin for packages from apt.uninett.no, you may now remove it, as there are no longer any other packages needed from that repository to run NAV. Please also be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance will not be updated until next week. Changes ======= ############################################################# ## NOTICE OF LICENSE CHANGE ## ############################################################# ## ## ## NAV's copyright license has changed from GPL v2 to GPL ## ## v3. Please refer to the release notes [4] for details. ## ## ## ############################################################# User-visible features and improvements: * #1423 (Add API endpoint for accounts and account groups) * #1509 (Add active alerts tab for port details page) * #1646 (Add event/alert details page) * #1615 (Room view - want device/interface count) * #1624 (Add support for Dell DNOS-SWITCHING-MIB) * #1659 (Add an interface browser tool) * #1662 (Business reports, device availability - filter for maintenance) * #1667 (More interface information for linkState alerts in status tool/widget) * #1705 (Enable use of api endpoint without specifying version) * #1706 (Audit log when users operates as other user) * #1739 (PortAdmin - users should not be able to set trunk on port) * #1758 (Writable vlan and prefix endpoints) * #1761 (API netbox endpoint: filter on type__name) * #1791 (Implement IT-WATCHDOGS-V4-MIB and GEIST-V4-MIB) * #1807 (Implement support for Powertek PDU inlet status) * #1817 (Add hook to customize tabs in ipdevinfo and info/room) Fixed GitHub issues in this release: * #1683 (Avoid "magic" Django bootstrapping in nav.models) * #1703 (Upgrade Django Rest Framework) * #1709 (Rename verb for changing interface admin status) * #1728 (Upgrade python-ldap) * #1744 (Replace automake toolchain with setuptools) * #1752 (No warnings for Django 1.8) * #1786 (Make middlewares work correctly on Django 1.10+) * #1796 (A crashing search provider will crash the entire search ui) * #1798 (Environment sensor rack API crashes on missing sensors) * #1799 (Portadmin errors out if making changes after using browser back button) * #1800 (Alert profile listing "Remove selected" button needn't be visible when there are no profiles to select.) * #1801 (Network Explorer MAC search always crashes) * #1802 (Saving a threshold rule without a target crashes with a KeyError) * #1803 (ipdevpoll should be able to perform reverse DNS lookups using /etc/hosts file) * #1804 (Unrecognized neighbors report crashes with 'bogus escape (end of line)') * #1814 (Change the NAV license from GPLv2 to GPLv3) * #1819 (/prefix/usage API endpoint crashes instead of returning 404 on non-existent prefixes) Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://github.com/UNINETT/nav/issues [4] https://nav.uninett.no/doc/latest/release-notes.html#nav-4-9 -- Morten Brekkevold UNINETT AS

5 11

Are Extreme-switches supported in NAV?
by Per-Olof Axelsson 31 Jan '19

31 Jan '19

Hi, I have installed the latest version of NAV (4.8.6) and have added some of our Extreme switches. SNMPv2-MIB :: sysDescr.0 = STRING: ExtremeXOS (X440-48p-10G) version 16.2.2.4 16.2.2.4-patch1-3 by release-manager on Fri Feb 17 08:00:10 EST 2017 However, I get the following error message in the log file ipdevpoll.log --- 2019-01-24 11: 33: 09,664 [WARNING nav.mibs.entity_mib.entitymib] [statuscheck ex035.inet.hb.se] device response has bad table index .19.48 in ENTITY-MIB :: entPhysicalTable, ignoring --- What does this mean? Is there a solution? Are extreme switches supported by NAV? Sincerely Per-Olof Axelsson University of Borås

2 2

Catalyst 93XX - cam info missing
by Ingeborg Hellemo 24 Jan '19

24 Jan '19

We observe a WS-C93XX (Catalyst 93xx Switch Stack from cisco) where for some MAC-addresses information about switch port is missing. All jobs have run recently, no error message about the topo job in ipdevpoll.log. Any ideas? --Ingeborg -- Ingeborg Østrem Hellemo -- ingeborg.hellemo(a)uit.no Dep. of Information Technology --- Univ. of Tromsø

2 5

How to remove chassis from netbox
by Ingeborg Hellemo 22 Jan '19

22 Jan '19

We have a Cisco Nexus 5548 where we have removed one of the Fex modules. This is still listed under Chassis and marked as Down. How do I remove it completely? --Ingeborg -- Ingeborg Østrem Hellemo -- ingeborg.hellemo(a)uit.no Dep. of Information Technology --- Univ. of Tromsø

2 1

nav 4.8.6 - restore permissions for unauthenticated users group
by Назаренко Павел Геннадь евич 02 Jan '19

02 Jan '19

Hello! Can you help me with restore default permissions for user groups. After I delete all defaults permissions for unauthenticated users group by mistake, I can’t access web interface of my nav 4.8.6 fresh installation. How can I restore default permissions without access to web interface? P.S. Sorry for my English and thanks.

2 1

FW: Refresh of Device Inventory
by Bothe, Mathias 05 Nov '18

05 Nov '18

Hello, i changed some line cards in one of our devices. Is it possible to refresh the inventory of that device so that I can see the new ports? Cheers Mathias

3 3

Get time out when accessing nav/ipdevinfo/{device}
by Jo Øiongen 05 Nov '18

05 Nov '18

Hi! Upgraded to latest and greatest a couple of days ago. After that everything works, except accessing devices. I have http://nav/ as my NAV URL root. Trying to access http://nav/ipdevinfo/{device} gives: Gateway Timeout The gateway did not receive a timely response from the upstream server or application. Can someone please point me in the right direction for where to start to look? I did a double upgrade. Debian and NAV. To get Debian up and running, including going from PostgreSQL 9.4 to PostgreSQL 9.6 I had to make some room on the hard drive. So I did a "cd /var/lib/graphite/whisper/nav/devices/" + "rm -rf *" Did I mess up here? BR, Jo

2 1

Announcement: NAV 4.8.6 released
by Morten Brekkevold 25 Okt '18

25 Okt '18

The sixth maintenance release of the 4.8 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 8/9 (Jessie/Stretch) are published in our APT repository [2], as usual. The virtual appliance will be updated shortly. Changes ======= Fixed GitHub issues in this release: * #1738 (snmptrapd stops logging after receiving HUP signal) * #1741 (Use of Object.assign breaks ipdevinfo in Internet Explorer) * #1750 (API arp and cam endpoint crashes on invalid mac query param) * #1780 (Machinetracker MAC search performs unnecessary join with Netbios table) * #1781 (Machinetracker performs unnecessary duplicate DNS lookups) Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://github.com/UNINETT/nav/issues -- Morten Brekkevold Uninett AS

1 0

ipdevpolld -J inventory is throwing ERRORs at me
by Ingeborg Hellemo 18 Okt '18

18 Okt '18

I have a box with the Inventory-job flagged as red. When I run the job form the command-line I get the following error: /usr/local/nav/bin/ipdevpolld -J inventory -n <boxname> 2018-09-25 08:37:19,646 [INFO nav.ipdevpoll] --- Starting ipdevpolld inventory --- 2018-09-25 08:37:26,439 [INFO plugins] Imported 30 plugin classes, 30 classes in plugin registry 2018-09-25 08:37:26,439 [INFO nav.ipdevpoll] Running single 'inventory' job for <boxname> 2018-09-25 08:37:26,497 [WARNING plugins.typeoid.typeoid] [inventory <boxname> ] Netbox has changed type from unknown to 1.3.6.1.4.1.42610.1.4.4 2018-09-25 08:37:26,561 [ERROR jobs.jobhandler] [inventory <boxname>] Plugin nav.ipdevpoll.plugins.modules.Modules(u'<boxname>') reported an unhandled failure Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/twisted/internet/defer.py", line 423, in errback self._startRunCallbacks(fail) File "/usr/local/lib/python2.7/site-packages/twisted/internet/defer.py", line 490, in _startRunCallbacks self._runCallbacks() File "/usr/local/lib/python2.7/site-packages/twisted/internet/defer.py", line 577, in _runCallbacks current.result = callback(current.result, *args, **kw) File "/usr/local/lib/python2.7/site-packages/twisted/internet/defer.py", line 1155, in gotResult _inlineCallbacks(r, g, deferred) --- <exception caught here> --- File "/usr/local/lib/python2.7/site-packages/twisted/internet/defer.py", line 1097, in _inlineCallbacks result = result.throwExceptionIntoGenerator(g) File "/usr/local/lib/python2.7/site-packages/twisted/python/failure.py", line 389, in throwExceptionIntoGenerator return g.throw(self.type, self.value, self.tb) File "/usr/local/nav/lib/python/nav/ipdevpoll/plugins/modules.py", line 51, in handle need_to_collect = yield self._need_to_collect() File "/usr/local/lib/python2.7/site-packages/twisted/internet/defer.py", line 1097, in _inlineCallbacks result = result.throwExceptionIntoGenerator(g) File "/usr/local/lib/python2.7/site-packages/twisted/python/failure.py", line 389, in throwExceptionIntoGenerator return g.throw(self.type, self.value, self.tb) File "/usr/local/nav/lib/python/nav/ipdevpoll/plugins/modules.py", line 62, in _need_to_collect yield self.stampcheck.load() File "/usr/local/lib/python2.7/site-packages/twisted/internet/defer.py", line 1097, in _inlineCallbacks result = result.throwExceptionIntoGenerator(g) File "/usr/local/lib/python2.7/site-packages/twisted/python/failure.py", line 389, in throwExceptionIntoGenerator return g.throw(self.type, self.value, self.tb) File "/usr/local/nav/lib/python/nav/ipdevpoll/timestamps.py", line 108, in load self.loaded_times = yield db.run_in_thread(_unpickle) File "/usr/local/lib/python2.7/site-packages/twisted/python/threadpool.py", line 196, in _worker result = context.call(ctx, function, *args, **kwargs) File "/usr/local/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext return self.currentContext().callWithContext(ctx, func, *args, **kw) File "/usr/local/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext return func(*args,**kw) File "/usr/local/nav/lib/python/nav/ipdevpoll/db.py", line 100, in _reset return func(*args, **kwargs) File "/usr/local/nav/lib/python/nav/ipdevpoll/timestamps.py", line 100, in _unpickle key=INFO_KEY_NAME, variable=self.var_name) File "/usr/local/lib/python2.7/site-packages/django/db/models/manager.py", line 92, in manager_method return getattr(self.get_queryset(), name)(*args, **kwargs) File "/usr/local/lib/python2.7/site-packages/django/db/models/query.py", line 361, in get num if num <= MAX_GET_RESULTS else 'more than %s' % MAX_GET_RESULTS nav.models.manage.MultipleObjectsReturned: get() returned more than one NetboxInfo -- it returned 2! 2018-09-25 08:37:26,561 [ERROR jobs.jobhandler] [inventory <boxname>] Job 'inventory' for <boxname> aborted: Job aborted due to plugin failure (cause=MultipleObjectsReturned('get() returned more than one NetboxInfo -- it returned 2!',)) OK, something is duplicated in my database, but where shall I look? --Ingeborg

2 4

New install of NAV
by Erik Kemper 25 Sep '18

25 Sep '18

Hello, I am trying to install a fresh NAV. But I get errors when I use: sudo apt-key adv --keyserver keys.gnupg.net --recv-key CE8E05E8 gpg: keyserver receive failed: No data Is that key still valid?? Met vriendelijke groet/ Kind regards, Erik Kemper Senior Datacenter Engineer QUAKER CHEMICAL CORPORATION DISCLAIMER: This message is intended only for the use of the individual or entity to which it is directed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by reply e-mail and delete the message and any attachments.

2 2

Separating back-end processes
by William Daly - Network Specialist, VUSD Technology 13 Sep '18

13 Sep '18

Hello all, The metrics that were currently collect only keep increasing overtime. We would like to separate the various parts of NAV on to different servers to spread the resource burden. I have explored the idea of moving postgres and carbon to a different server. What would you recommend? Can I get away with just clustering Carbon? Thanks, William Daly Network Specialist Vacaville Unified School District (707) 453-6170

3 5

mail configuration on nav server
by Avanish Upadhyay 13 Sep '18

13 Sep '18

Ingeborg Hellemo <ingeborg.hellemo(a)uit.no> 5:19 PM (10 minutes ago) to me, nav avanish005(a)gmail.com said: > Plz send document how to setup smtp gmail mail server on NAV uninett network > monitor server You should rather ask this question to nav-users(a)uninett.no NAV will default send its mail via localhost, but nav.conf let you configure NAV to use a different server: # SMTP server settings to use when sending email alerts from NAV # #EMAIL_HOST = localhost #EMAIL_PORT = 25 #EMAIL_HOST_USER = #EMAIL_HOST_PASSWORD = #EMAIL_USE_TLS = False I am also setting this configuration but no any email alert come how to test this configuration any option to send a test mail from nav server and check -- *AVANISH UPADHYAY* *MOB-9889854305* *SALTLAKE,KOL-91*

2 1

Re: mail configuration (fwd)
by Ingeborg Hellemo 11 Sep '18

11 Sep '18

I am forwarding this to nav-users(a)uninett.no --Ingeborg

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users