Nav-users

nav-users@lister.sikt.no

2 participants
1380 discussions

Re: SV: Cisco Routers SNMP Trap issue
by Morten Brekkevold 10 Des '12

10 Des '12

On Fri, 7 Dec 2012 10:45:32 +0100 "Mattias Torsfred" <Mattias.Torsfred(a)funnit.no> wrote: > Hi, yes we use ACL for SNMP queries. The snmpwalk returns values that > are correct according to the Cisco Router 2821 setup. Does the router log the incorrect communities that were used? It might be interesting to compare the list of VLANs NAV is querying that the device seems to have no knowledge of. > I assume that nav browse all 4094 VLAN id and for each VLAN id that > not are in use the device will generated an SNMP trap with the auth > messages. No, recent versions of NAV will only check the specific VLANs reported by the device itself through the queries I sent you examples of. If none are reported, none are queried. > In the Seed DB I have set the device to "GW", I tested to change to GSW > and then the SNMP traps is not generated. That's weird; the code involved here doesn't distinguish between device categories, it just checks what VLANs the device reports, if any. Could you share with us the actual responses given to the snmp queries you performed (censoring any secrets from the community outputs)? > So, can this be related to Cisco model 28xx or is this related to > configuration on the device when it comes to VLAN/VTP? I still don't have enough information to make any qualified guesses here.. > Is this an issue known in other implementations of NAV? What other implementations would that be? Which version of NAV are you using, by the way? > Kind regards, > > Mattias Torsfred > Systemconsultant > Funn IT Also, please use your email client's reply-to-all function when replying to mailing list posts, unless you have a very specific reason to keep the remainder of the conversation private. -- Morten Brekkevold UNINETT

1 0

Cisco Routers SNMP Trap issue
by Mattias Torsfred 07 Des '12

07 Des '12

Hi, I have setup a NAV 3.12.2 and started to add Cisco L2 and L3 equipment into the seed database. I use an other software to monitor the devices as well. When it comes to Cisco routers (not Cisco L3 switches) I get many SNMP Traps "Too many SNMP authentication failures . Check for hacking attempt on x.x.x.x" and "SNMP incorrect community name...". I am aware of the issue/design of NAV when it comes to VLAN browsing and that this might be the case. Is there any configuration I can set on Cisco routers or in NAV to prevent this kind of behavior? I need to have the traps in case there actual is an SNMP brute force attempt. Kind Regards Mattias Torsfred Systemconsultant Funn IT

2 1

SIP service monitor
by Corey Thompson 04 Des '12

04 Des '12

Can one build custom service monitors in NAV?...Specifically looking for a SIP service monitor... Thanks -- Corey Thompson Technology Manager East Grand Forks Water and Light 1010 5th Ave NE East Grand Forks, MN 56721 218-399-3310 cthompson(a)egf.mn

2 1

overdue jobs
by Matej Gregr 23 Nov '12

23 Nov '12

Hello, I have noticed, that NAV is reporting jobs as overdue, even though a job end with success. I believe the problem is caused by trigger trim_old_ipdevpoll_job_log_entries, which should delete the old jobs from the ipdevpoll_job_log table. DELETE FROM ipdevpoll_job_log WHERE id IN (SELECT id FROM ipdevpoll_job_log WHERE job_name=NEW.job_name AND netboxid=NEW.netboxid ORDER BY end_time ASC OFFSET 100); When there are 100 log entries for a job in the nav database the trigger will delete the newest logged job instead of oldest one. I believe, that the ORDER BY clause should be DESC not ASC. Regards, M.

2 3

mib files
by Gschell, Johannes 23 Nov '12

23 Nov '12

hello, we have nav for monitoring, for our dell switche in use. and it is a great software. but we can't see all informations. Can you send me instructions to add mib-files in nav? or is it too complicate? Mit freundlichen Grüßen / Best regards Johannes Gschell Auszubildender Fachinformatiker Trainee IT [Beschreibung: CGM-Holding_RBG.jpg] CompuGroup Medical AG Maria Trost 21 D-56070 Koblenz T +49 (0) 261 8000-1865 F +49 (0) 261 8000-3865 johannes.gschell(a)cgm.com<mailto:johannes.gschell@cgm.com> www.cgm.com<http://www.cgm.com/> Vorsitzender des Aufsichtsrates / chairman of the supervisory board: Prof. Dr. Klaus Steffens Vorstand / board of directors: Frank Gotthardt (CEO), Uwe Eibich, Christian B. Teig Sitz der Gesellschaft / company domiciled in: Koblenz, HRB 4358 USt-IdNr./ VAT ID: DE114134699 SYNCHRONIZING HEALTHCARE Before printing, think about the environment.

2 1

Jabber Config
by Corey Thompson 21 Nov '12

21 Nov '12

Can anyone share their Jabber/XMPP configuration for the alertengine? Particularly interested in Google Talk integration. Thanks -- Corey Thompson Technology Manager East Grand Forks Water and Light 1010 5th Ave NE East Grand Forks, MN 56721 218-399-3310 cthompson(a)egf.mn

2 1

Announcement: NAV 3.12.3 released
by Morten Brekkevold 01 Nov '12

01 Nov '12

The third maintenance release of the 3.12 series, version 3.12.3, is now available for download at Launchpad: https://launchpad.net/nav/3.12/3.12.3 The 3.12.3 release fixes the following reported issues: * LP#343857 (Invalid IP in subnet matrix) * LP#1052907 (Threshold configurator does not indicate the unit/scale of a metric when editing a threshold) * LP#1062230 (Removing a threshold doesn't clear an active threshold alert) * LP#1062236 (PSU alarms don't show up on Status page) * LP#1063728 (TemplateSyntaxError at /info/) * LP#1068097 (navtopology crashes on CDP data from Cisco Switch Clustering) * LP#1069688 (datasources have no default unit) * LP#1069751 (Subnet matrix crash on scope with only a few large subnets) * LP#1070798 (spaces in search words in navbar are not trimmed) * LP#1070846 (ipdevinfo crashes when searching for netbox that does not exist) Please report further bugs at https://launchpad.net/nav/+filebug :-) Binary packages for Debian will be made available as soon as possible. The Debian package is maintained by Morten Werner Forsbring, on commission From UNINETT. Happy NAVing everyone! -- Morten Brekkevold UNINETT

1 0

MIBs
by Gschell, Johannes 30 Okt '12

30 Okt '12

Hello, can i or can you add MIB files to nav from dell? Mit freundlichen Grüßen / Best regards Johannes Gschell Auszubildender Fachinformatiker Trainee IT [Beschreibung: CGM-Holding_RBG.jpg] CompuGroup Medical AG Maria Trost 21 D-56070 Koblenz T +49 (0) 261 8000-1865 F +49 (0) 261 8000-3865 johannes.gschell(a)cgm.com<mailto:johannes.gschell@cgm.com> www.cgm.com<http://www.cgm.com/> Vorsitzender des Aufsichtsrates / chairman of the supervisory board: Prof. Dr. Klaus Steffens Vorstand / board of directors: Frank Gotthardt (CEO), Uwe Eibich, Christian B. Teig Sitz der Gesellschaft / company domiciled in: Koblenz, HRB 4358 USt-IdNr./ VAT ID: DE114134699 SYNCHRONIZING HEALTHCARE Before printing, think about the environment.

2 1

Announcement: NAV 3.12.2 released
by Morten Brekkevold 18 Okt '12

18 Okt '12

The second maintenance release of the 3.12 series, version 3.12.2, is now available for download at Launchpad: https://launchpad.net/nav/3.12/3.12.2 The 3.12.2 release fixes the following reported issues: * LP#1052902 (linkState remains unresolved after links comes back up) * LP#1052906 (Cannot add thresholds with decimals) * LP#1057403 (cricket sensor module does not clean up old config) * LP#1057514 (Removed PSUs and fans don't disappear from NAV) * LP#1060974 (Web interface crash when PySNMP-SE is not installed) * LP#1061518 (Room view "last seen" search needs label to identify unit/scale) * LP#1061520 (The ipdevpoll job "logging" should be renamed to "ip2mac") * LP#1061521 (The "lastupdated" report is horribly broken) * LP#1061526 (The ipdevinfo job listing should include interval information) * LP#1061529 (Ipdevinfo "recent alerts" tab should indicate unresolved alerts by changing colour) * LP#1061532 (My SMS list should sort the newest messages first) * LP#1061595 (Machine Tracker no longer accepts a prefixid argument) * LP#1065442 (Search for ip or id in navbar does not work) * LP#1065464 (Searching for a partial ip in navbar crashes the site) Please report further bugs at https://launchpad.net/nav/+filebug :-) Binary packages for Debian will be made available as soon as possible. The Debian package is maintained by Morten Werner Forsbring, on commission From UNINETT. Happy NAVing everyone! -- Morten Brekkevold UNINETT

1 0

MetaNav for Dell Switches
by Gschell, Johannes 17 Okt '12

17 Okt '12

Hello, I have a question about MetaNav. We have a lot of Dell Switch in use. Give it a plugin or a addon to support the Dell Switche? We have in use the follow switch types: Dell PowerConnect 5448 Dell PowerConnect 6224 Dell PowerConnect 8024 Dell PowerConnect 5524P Dell PowerConnect 5548P Dell PowerConnect 6224F Dell PowerConnect 6248P I hope you can me help. Mit freundlichen Grüßen / Best regards Johannes Gschell

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users