Nav-users

nav-users@lister.sikt.no

1376 discussions

Translate a log file?
by morten.vold＠uninett.no 14 Jul '06

14 Jul '06

SLander(a)hearstsc.com wrote: > Could anyone translate these warnings to English? I am not sure > what they are telling me. Argh, more Norwegian leftovers from NAV 2... I've submitted a bug report so we'll remember to translate this. > This is from the networkDiscovery-topology.html file > ---->[WARNING]: Boks(8): Floor28-6513-1, mer enn en link til boks(31) > floor28-3750-4.home.com, uten at vi vet mp i andre enden. This reads: Floor28-6513-1, more than one link to box(31) floor-28-3750-4.home.com, without knowing mp in the other end. > [WARNING] Conflicting boksbak in mp vs. mpBoksbak for Boks(9): > Floor28-6513-2 Mp: 253 bmp: BoksMpBak [boksbak=8, toIfindex=null], bmpA: > BoksMpBak [boksbak=38, toIfindex=51] boksbak = "boxbehind", BoksMpBak="BoksMpBehind" To be honest, I have no idea what this means, it sounds very implementation specific (e.g., what is an `mp`? `Member of Parliament`? `Military Police`?). Cc: to the original author, Kristian, and hopefully he can shed some light on this. -- mvh Morten Vold UNINETT

3 2

More errors with cricket-config in NAV-3.1.0
by roar.pettersen＠uib.no 12 Jul '06

12 Jul '06

Hello ! > The solution is quite simple - copy the .nav file from > $NAV/doc/cricket/cricket-config/router-interfaces-snmpv1-and-giga/ to > giga-router-interfaces. Run makecricketconfig.pl. The vlanXXX have now the correct description field, all physical interfaces eg gigabitethernet3_6 or fastethernet7_4 have still the "No description available". Any clue ? -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From john.m.bredal at ntnu.no Wed Jul 12 14:57:05 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Wed Jul 12 13:57:08 2006 Subject: [Nav-users] More errors with cricket-config in NAV-3.1.0 In-Reply-To: <Pine.SOC.4.64.0607121121190.10108(a)alf.uib.no> References: <Pine.SOL.4.63-L.0607071031580.18695(a)saruman.uio.no> <44B36A7E.6060002(a)uninett.no> <Pine.SOC.4.64.0607111134070.20956(a)alf.uib.no> <1152694764.44b4b9ece7b39(a)webmail.ntnu.no> <Pine.SOC.4.64.0607121121190.10108(a)alf.uib.no> Message-ID: <1152705425.44b4e391c1eee(a)webmail.ntnu.no> Quoting Roar Pettersen <roar.pettersen(a)uib.no>: > Hello ! > > > The solution is quite simple - copy the .nav file from > > $NAV/doc/cricket/cricket-config/router-interfaces-snmpv1-and-giga/ > to > > giga-router-interfaces. Run makecricketconfig.pl. > > > The vlanXXX have now the correct description field, all physical > interfaces eg gigabitethernet3_6 or fastethernet7_4 have still the > "No > description available". > > Any clue ? > Hm, try to edit the .navfile and do the following: In the "descr"-tag, remove everything in the sql-query after gwportid=$id. --

1 0

freebsd 6.1 and nav from subversion
by tv＠solnet.ch 11 Jul '06

11 Jul '06

Hello List I have some problems to run NAV on freebsd 6.1 (i386). I used the description from http://metanav.ntnu.no/moin.cgi/DevVerToFreeBSD The installation worked without any problems. When I try to start nav with ./nav start I always get an error message like: Fatal error: Could not find the nav.startstop module. Is your PYTHONPATH environment correctly set up? I've set the PYTHONPATH to /usr/local/nav/lib/python but I still got the same error message. This are all python programs I already installed: py24-cheetah-1.0 py24-forgethtml-20041021 py24-forgetsql-0.5.1 py24-mx-base-2.0.6 py24-psycopg-1.1.21 py24-rrdtool_lgpl-0.2.1_1 python-2.4.3 Is there something missing? Cheers, Thomas

1 0

More errors with cricket-config in NAV-3.1.0
by roar.pettersen＠uib.no 11 Jul '06

11 Jul '06

Hi ! Don't know if other NAV users see this problem in Cricket ? Problem description : The description field is "missing" on all "giga-router-interfaces", eg : gigabitethernet3_1 [ Octets ] [ UcastPackets ] [ Errors ] No description available But if I look at a "giga-switch-ports" on the same router/switch then the description field is correct. I use cricket-1.0.5 and the problem is seen on Catalyst 6500 (both Sup720 and Sup2.2) Guess this problem is for John Magne. :-) -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kjetil.olsen at usit.uio.no Tue Jul 11 14:14:11 2006 From: kjetil.olsen at usit.uio.no (Kjetil Otter Olsen) Date: Tue Jul 11 13:14:22 2006 Subject: [Nav-users] More errors with cricket-config in NAV-3.1.0 In-Reply-To: <Pine.SOC.4.64.0607111134070.20956(a)alf.uib.no> References: <Pine.SOL.4.63-L.0607071031580.18695(a)saruman.uio.no> <44B36A7E.6060002(a)uninett.no> <Pine.SOC.4.64.0607111134070.20956(a)alf.uib.no> Message-ID: <1546.85.164.170.88.1152616451.squirrel(a)webmail.uio.no> On Tue, July 11, 2006 11:43, Roar Pettersen wrote: > Hi ! > > Don't know if other NAV users see this problem in Cricket ? It's an old error from the 3.0.0 release which has been reported before (at least during the big NAV-meeting early this year). The database is correct, so I assume that "make-cricket-config" is to blame... Lets hope for a fix real soon now :-) --Kjetil

1 0

Problem with Browsing rrd files
by SLander＠hearstsc.com 10 Jul '06

10 Jul '06

>Then navigate directly to >http://NavServer/browse/rrd (typing nothing after rrd), without clicking >your way to the rrd browser from somewhere else in the interface. When I do this, I get a Search menu, with DataSource and a text box, and search button, and below that a Category box with buttons "Add Selected", "Add and join", and Cancel. I can't seem to do much from here - If I click on anything in Category, it selects it, and then almost immediately unselects it - buttons don't seem to do much at this point! The Current path at this point is Home > IP Device Center I will take another look at rrdtool and pyrrdtool while you are thinking about this.... Scott Morten Vold <morten.vold@unin To: SLander(a)hearstsc.com ett.no> cc: nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] Problem with Browsing rrd files 07/10/2006 06:06 AM SLander(a)hearstsc.com wrote: > Morten, > > If I manually enter the url, I get the same result - segfault and > blank screen. If I change the rrdBrowser.conf file to point to a > non-existent location, IE, instead of /tmp/rrd_ as the prefix, I use just > "rrd_", then I get a menu with "year month week day hour" and some choose > action items. But, obviously, no graph. That's not what your supposed to see at all. The rrdBrowser stores most of its interactive state in your user session, which is why I asked you to completely close your browser (to remove anything left in your session data) - alternatively log out of NAV or remove the NAV cookie from your browser. Then navigate directly to http://NavServer/browse/rrd (typing nothing after rrd), without clicking your way to the rrd browser from somewhere else in the interface. Even typing a non-existant location in your rrdBrowser.conf should not take your a menu with "year month week day hour" when typing that URL directly... This is really hard to debug, since a segfault can only stem from native code - which NAV doesn't contain at all. The best way would probably be to debug the apache process, but that could prove really ugly. If the path we're on right now doesn't lead anywhere, I'm not really sure how I can help you, short of suggesting that you reinstall rrdtool and pyrrdtool completely, just to see what happens. -- mvh Morten Vold UNINETT (See attached file: signature.asc) This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message.

1 0

rrdtool question
by wj_peng24＠yahoo.com.cn 07 Jul '06

07 Jul '06

Hello everyone To install nav3.1.0, I have got a problem about Compiling the SimpleSnmp, the system shows that: BUILD FAILED /nav/nav-3.1.0/src/SimpleSnmp/build.xml:30: Compile failed; see the compiler err or output for details. And there is another problem about the rrdtool. As I know , the py-rrdtool-0.21 can't support rrdtool of version 1.2 or over, how about the rrdtool-python-1.2.3, dose it support rrdtool-1.2.x? can anybody who can help me ? also ,I can only find the nav-3.1.0 source package, is anybody who has got the rpm package, please tell me where can I get it. Thanks __________________________________________________ žÏ¿ì×¢²áÑÅ»¢³¬ŽóÈÝÁ¿Ãâ·ÑÓÊÏä? http://cn.mail.yahoo.comFrom wj_peng24 at yahoo.com.cn Fri Jul 7 16:20:58 2006 From: wj_peng24 at yahoo.com.cn (wenjun peng) Date: Fri Jul 7 09:21:10 2006 Subject: [Nav-users] psycopg Message-ID: <20060707072058.94623.qmail(a)web15910.mail.cnb.yahoo.com> Hello, When I start the web interface, the page can't be show out, and it said : ImportError: /usr/lib/python2.4/site- packages/psycopgmodule.so: failed to map segment from shared object: Permission denied what's wrong with the module psycopg __________________________________________________ žÏ¿ì×¢²áÑÅ»¢³¬ŽóÈÝÁ¿Ãâ·ÑÓÊÏä? http://cn.mail.yahoo.comFrom a.l.prois at usit.uio.no Fri Jul 7 11:40:44 2006 From: a.l.prois at usit.uio.no (=?ISO-8859-1?Q?Asbj=F8rn_Pr=F8is?=) Date: Fri Jul 7 10:40:53 2006 Subject: [Nav-users] Errors with cricket-config from NAV-3.1.0 Message-ID: <Pine.SOL.4.63-L.0607071031580.18695(a)saruman.uio.no> Helu. When installing a fresh 3.1.0 of NAV, with the cricket configs etc from that release there are some problems. --- snip --- -bash-3.00# cat ~navcron/cricket/cricket-logs/giga.0 [07-Jul-2006 10:33:01 ] Log level changed from warn to info. [07-Jul-2006 10:33:01 ] Starting collector: Cricket version 1.0.5 (2004-03-28) [07-Jul-2006 10:33:01*] Unknown subtree /giga-router-interfaces. [07-Jul-2006 10:33:01*] Unknown subtree /giga-switch-ports. [07-Jul-2006 10:33:01*] Unknown subtree /giga-router-interfaces. [07-Jul-2006 10:33:01*] Unknown subtree /giga-switch-ports. [07-Jul-2006 10:33:01 ] Processed 0 targets in 0 seconds. --- /snip --- It doesnt match the new subtree structure (router-interfaces, router-interfaces-snmpv1-and-giga, switch-ports, switch-ports-snmpv1-and-giga and so on).. This is causing lots of missing switch and router-ports! The solution is, i guess, i to use the cricket-setup from nav-3.0.1 meanwhile! Just a tip for those reinstalling NAV from scratch with 3.1.0 #:) -Asbj?rn- >From wj_peng24 at yahoo.com.cn Fri Jul 7 18:25:38 2006 From: wj_peng24 at yahoo.com.cn (wenjun peng) Date: Fri Jul 7 11:25:55 2006 Subject: [Nav-users] introduction Message-ID: <20060707092538.17539.qmail(a)web15906.mail.cnb.yahoo.com> hello, Can anyone who write a new installations about how to install the nav-3.1.0 in ferdora core5 and also how to configure it. it is better to list the whole things that needed during installation. __________________________________________________ žÏ¿ì×¢²áÑÅ»¢³¬ŽóÈÝÁ¿Ãâ·ÑÓÊÏä? http://cn.mail.yahoo.comFrom morten.vold at uninett.no Mon Jul 10 13:06:09 2006 From: morten.vold at uninett.no (Morten Vold) Date: Mon Jul 10 12:06:18 2006 Subject: [Nav-users] Problem with Browsing rrd files In-Reply-To: <OF8925035B.D5AD17F5-ON852571A2.004AEB13-852571A2.004BA622(a)hearstsc.com> References: <OF8925035B.D5AD17F5-ON852571A2.004AEB13-852571A2.004BA622(a)hearstsc.com> Message-ID: <44B22691.4010901(a)uninett.no> SLander(a)hearstsc.com wrote: > Morten, > > If I manually enter the url, I get the same result - segfault and > blank screen. If I change the rrdBrowser.conf file to point to a > non-existent location, IE, instead of /tmp/rrd_ as the prefix, I use just > "rrd_", then I get a menu with "year month week day hour" and some choose > action items. But, obviously, no graph. That's not what your supposed to see at all. The rrdBrowser stores most of its interactive state in your user session, which is why I asked you to completely close your browser (to remove anything left in your session data) - alternatively log out of NAV or remove the NAV cookie from your browser. Then navigate directly to http://NavServer/browse/rrd (typing nothing after rrd), without clicking your way to the rrd browser from somewhere else in the interface. Even typing a non-existant location in your rrdBrowser.conf should not take your a menu with "year month week day hour" when typing that URL directly... This is really hard to debug, since a segfault can only stem from native code - which NAV doesn't contain at all. The best way would probably be to debug the apache process, but that could prove really ugly. If the path we're on right now doesn't lead anywhere, I'm not really sure how I can help you, short of suggesting that you reinstall rrdtool and pyrrdtool completely, just to see what happens. -- mvh Morten Vold UNINETT

1 0

Missing file?
by SLander＠hearstsc.com 06 Jul '06

06 Jul '06

Hello, On installing NAV3.1, the notes mention a new autodiscovery tool: * Autodiscovery command line tool added to contrib. This tool will try to discover every managed network device within your network, and add them to NAV. But, I don't see this on install. In the src directory, I see autodiscovery. If I try to build autodiscovery, I get: linux:/data/projects/Nav/nav-3.1.0/src/autodiscovery # ant install Buildfile: build.xml init: [mkdir] Created dir: /data/projects/Nav/nav-3.1.0/src/autodiscovery/build compile: [javac] Compiling 2 source files to /data/projects/Nav/nav-3.1.0/src/autodiscovery/build dist: [mkdir] Created dir: /data/projects/Nav/nav-3.1.0/src/autodiscovery/dist [jar] Building jar: /data/projects/Nav/nav-3.1.0/src/autodiscovery/dist/autodiscovery.jar install: [mkdir] Created dir: /data/projects/Nav/nav-3.1.0/src/autodiscovery/ ${DESTDIR}/usr/local/nav/lib/java/autodiscovery [copy] Copying 1 file to /data/projects/Nav/nav-3.1.0/src/autodiscovery/ ${DESTDIR}/usr/local/nav/lib/java/autodiscovery [mkdir] Created dir: /data/projects/Nav/nav-3.1.0/src/autodiscovery/ ${DESTDIR}/usr/local/nav/bin BUILD FAILED /data/projects/Nav/nav-3.1.0/src/autodiscovery/build.xml:54: Warning: Could not find file /data/projects/Nav/nav-3.1.0/src/autodiscovery/autodiscovery.sh to copy. Is there a file, autodiscovery.sh, that is missing from the distribution? Or, am I just being dumb? Thanks Scott This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message. >From wj_peng24 at yahoo.com.cn Thu Jul 6 11:05:14 2006 From: wj_peng24 at yahoo.com.cn (wenjun peng) Date: Thu Jul 6 04:05:28 2006 Subject: [Nav-users] rrdtool Message-ID: <20060706020514.72865.qmail(a)web15903.mail.cnb.yahoo.com> Hello, I am using nav-3.1.0, and installed rrdtool1.2.x, but as the installing note said, the py-rrdtool would not support rrdtool over 1.0, then I download rrdtool-python1.2.x, is that ok? --------------------------------- ÇÀ×¢ÑÅ»¢Ãâ·ÑÓÊÏä-3.5GÈÝÁ¿£¬20MžœŒþ£¡ From odd.hauge at hiMolde.no Thu Jul 6 09:23:35 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Jul 6 08:25:02 2006 Subject: [Nav-users] Switchport Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C2A36AAE(a)stam.himolde.no> Now are all router-prefixes back in Nav. So everything seems fines. Thanks ;) But there are still problem with some switches. Both my HP Procurve 2848 and HP Procurve 2650 have wrong number of ports, and vlan is missing from the switchport report. Some (3 of 6) Cisco Catalyst 2948 (Fixed Cat 4000 switches running catos) are reported with 102 ports.... But the 3 other 2948 switches are reported correctly. vlan are missing from som switches. Can this be due to no activity on the swithes ? - odd arne > -----Original Message----- > From: Hauge Odd Arne > Sent: Wednesday, July 05, 2006 9:26 PM > To: 'Morten Vold' > Cc: nav-users(a)itea.ntnu.no > Subject: RE: [Nav-users] Switchport > > > > > Thanks for allowing us access to debug your installation. It seems > > your report.conf hasn't been updated in a while. The > swport report in > > your report.conf seems to be a version that's over a year > old, and it > > contains errors. > > > Hmm, I don't comment that one.... But maybe the installation > script shall update config files to, with a warning for us to > check if the new config files needs any update.... I usually > check the files in the nav/conf directory, but I have > forgotten the report/report.conf directory. > Shame on me ! > > But now I have lost my router-prefixes for local vlans. The > vlans are defined on a GSW box. You may take a look at > /prefix report. > > - odd arne > > > >

1 0

Editdb error
by Jan.Susegg＠hint.no 03 Jul '06

03 Jul '06

I have upgraded to NAV 3.1.0 and I got a problem with accessing EDITDB Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.2/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/lib/python2.2/site-packages/mod_python/apache.py", line 457, in import_module module = imp.load_module(mname, f, p, d) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 29, in ? import editTables,nav.Snmp,sys,re,copy,initBox,forgetSQL,nav.web File "/usr/local/nav/lib/python/nav/Snmp.py", line 33, in ? from pysnmp import role, v1, v2c, asn1 ImportError: cannot import name role Can anyone tell me how to solve this problem? best regards Jan Susegg North-Trondelag University College >From kreide at gmail.com Mon Jul 3 15:26:46 2006 From: kreide at gmail.com (Kristian Eide) Date: Mon Jul 3 14:26:51 2006 Subject: [Nav-users] Announcement: NAV 3.1.0 is out In-Reply-To: <44A8D9E2.6070700(a)uninett.no> References: <8EEE7738AEDF6947B3E5508A0244D1C2A36A31(a)stam.himolde.no> <44A8D9E2.6070700(a)uninett.no> Message-ID: <b4c110fd0607030526s6ad2e098pacb80842a69cbed0(a)mail.gmail.com> > So the tricky part now is to figure out which changes you've already > included in your database, and which ones you may have overlooked NAV really needs to get a proper version system for its schema changes or it will be very hard to manage such changes in any reasonable way (manually creating sql patch scripts is not the way to go). -- Kristian >From roar.pettersen at uib.no Mon Jul 3 15:45:17 2006 From: roar.pettersen at uib.no (Roar Pettersen) Date: Mon Jul 3 14:45:22 2006 Subject: [Nav-users] Editdb error In-Reply-To: <8A65B72C71E7484FBE1862045AAC5A8FB73D20(a)embla.ansatt.hint.no> References: <8A65B72C71E7484FBE1862045AAC5A8FB73D20(a)embla.ansatt.hint.no> Message-ID: <Pine.SOC.4.64.0607031442450.1934(a)alf.uib.no> Hello ! > Can anyone tell me how to solve this problem? I had exacly the same problem. :-) You have a missmatch in the pysnmp library when you downgraded from pysnmp-3.3.5 to 2.0.8. My solution was to delete /usr/local/lib/python2.4/site-packages/pysnmp/ and install the pysnmp-2.0.8 again. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From morten.vold at uninett.no Mon Jul 3 15:51:23 2006 From: morten.vold at uninett.no (Morten Vold) Date: Mon Jul 3 14:51:33 2006 Subject: [Nav-users] Announcement: NAV 3.1.0 is out In-Reply-To: <b4c110fd0607030526s6ad2e098pacb80842a69cbed0(a)mail.gmail.com> References: <8EEE7738AEDF6947B3E5508A0244D1C2A36A31(a)stam.himolde.no> <44A8D9E2.6070700(a)uninett.no> <b4c110fd0607030526s6ad2e098pacb80842a69cbed0(a)mail.gmail.com> Message-ID: <44A912CB.1050904(a)uninett.no> Kristian Eide wrote: > NAV really needs to get a proper version system for its schema > changes or it will be very hard to manage such changes in any > reasonable way (manually creating sql patch scripts is not the way to > go). Interesting observation, Kristian, but your advice isn't very helpful without any examples or concrete ideas. What, in your opinion, is a "proper version system for schema changes"? My take on this is that schema changes are relatively few and far apart in NAV today. Therefore I don't see the need to invest a lot of time into devising some elaborate system to avoid having to manually write sql patch scripts. My suggestions is rather to implement a project policy to commit patch scripts along with any schema alterations. That way, a poor release coordinator (me) won't have to piece together every schema change that took place since the last release, and produce a whopping mishmash of hopefully consistent SQL upgrade statements on each release. Also, this should solve the problem for the few who might be using bleeding edge code from trunk at all times. They might not all be SQL wizards, able to analyze the changes and whip up their own SQL statements to change the schema, but each revision that updates the schema will come with an up-to-date upgrade script. We've never claimed that tracking the development trunk should be a piece-of-cake, though. -- mvh Morten Vold UNINETT

1 0

Switchport
by odd.hauge＠hiMolde.no 03 Jul '06

03 Jul '06

Hi. I still have above 160' switch ports. HP switches not running VTP have above 60' switch ports. I also have a location in another city (Kristiansund) with another VTP. Every vlan defined in the main location (Molde) are reported on the switches in Kristiansund, even if they are not defined in Kristiansund. VLAN information is missing for ports on some switches in the sw-port report. I have tried the "netbox.uptodate field to false" and remove/add the switch without any success. I have several other identically switches without this "problem" running the same catos version. How can I debug this? - odd arne > -----Original Message----- > From: Kristian Eide [mailto:kreide@gmail.com] > Sent: Tuesday, April 04, 2006 10:05 AM > To: Hauge Odd Arne > Cc: nav-users(a)itea.ntnu.no > Subject: Re: [Nav-users] Machine tracker > > And Nav still reports that I have above 200 000 > switchports. Vlan defined in one location are shown in the > report for every location, regardless if the vlans are > active/defined or not on all switches in every location. > > I believe this is caused by a bug in the code which tries to > determine the extend of private (i.e. vlans without a router) > networks. > Unfortunately this code was not tested well enough and it > really should be disabled for now. I hope Morten can help > take care of this when he returns. > > -- > Kristian >

1 0

Tags shown instead of the page
by sommerjobb＠froisland.no 03 Jul '06

03 Jul '06

> What version of NAV are you running? This was fixed in NAV 3.0.1. > You are right I installed 3.0.0, just followed one of the red hat install guides on the wiki using a rpm for 3.0.0. Now I'm trying to install either 3.0.1 og 3.1.0, but get the same error when running make. The ./configure par works nicely, runing make I get: [marius@room nav-3.1.0]$ make make[1]: Entering directory `/home/marius/nav-3.1.0/src' Building Util ... (cd Util && ) && touch Util /bin/sh: -c: line 0: syntax error near unexpected token `)' /bin/sh: -c: line 0: `(cd Util && ) && touch Util' make[1]: *** [Util] Error 2 make[1]: Leaving directory `/home/marius/nav-3.1.0/src' make: *** [all] Error 1 Marius

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users