Re: Cisco SG500+NAV

On Wed, 5 Apr 2017 22:04:33 +0300 Игорь Коив koiv.igor@gmail.com wrote:

Is this correct:

*nav.devices.172_16_0_1.ports.Gi0_2.ifInOctets *sets traffic that goes in the router (bits/s) What threshold should be set? for example: *alert threshold >20000 and clear treshhold <19000 ?*

If you want the threshold to be specifically 20000 bits/s for Gi0/2 on 172.16.0.1 (and the alert to be cleared when the traffic returns below 19000 bits/s), yes.

I might recommend that you use percentage values, though (especially if you are using a rule that will match multiple ports). The treshold monitor knows how to compare percentage values for octet counters using the nominal speed of the port (e.g. >90% and <89%)