Thank you all for the information.
I found an interesting post regarding Dell and setting vlan, and there is a solution in there. However it is not clear enough that I can write code without something to test on. The problem is the "general" mode that seem to exist on Dell and how to avoid using that.
http://en.community.dell.com/support-forums/network-switches/f/866/t/1925701...
Also the linked manual below has detailed instructions for setting vlan. Those instructions does not work however on HP which is the equipment we have available at the moment. More technically it also tells us that there are quite some differences in the MIBs based on which series the switch is - I quote:
"On the E-Series and C-Series each position in the 8-character string is for one port, starting with Port 0at the left end of the string, and ending with Port 7 at the right end. A 0 indicates that the port is not amember of the VLAN; a 1 indicates VLAN membership.•On the S-Series, each position in the 8-character string is for one port, starting with Port 1 at the leftend of the string, and ending with Port 8 at the right end. A 0 indicates that the port is not a member ofthe VLAN; a 1 indicates VLAN membership."
https://www.manualslib.com/manual/546511/Dell-Force10-S4810p.html?page=964#m...
What is boils down to is equipment to test implementations on. I will make a separate post about this.
On 08. juni 2017 10:28, Vinsonnaud Ludovic wrote:
Hi,
Here's the answer from Dell about N2000 Series (mail below and here's the translation)
"I confirm that our switches are compatible with this MIB. It is part of the available MIBs within the switch firmware (http://www.dell.com/support/home/us/en/19/product-support/product/networking...)
This MIB is contained in the vlan.my file
I ask in internal to try to get details about its implementation."
-------- Message transféré -------- Sujet : RE: MIB N2048 Date : Thu, 8 Jun 2017 07:44:30 +0000 De : Nicolas.Roughol@dell.com Pour : Thierry.Favereaux@dell.com, ludovic.vinsonnaud@institutoptique.fr Copie à : gilbert.lucas@institutoptique.fr, Franck.Dufas@dell.com *Dell - Internal Use - Confidential * ** Bonjour M. Vinsonnaud, Je vous confirme que nos switches sont bien compatibles avec la MIB en question. Elle fait partie des MIBs disponibles au téléchargement avec le firmware des switchs (http://www.dell.com/support/home/us/en/19/product-support/product/networking-n2000-series/drivers) La MIB en question étant contenu dans le fichier vlan.my Je me renseigne en interne pour tenter d’obtenir des détails d’implémentation de celle-ci. Cordialement, *Nicolas ROUGHOL*** Networking Sales Engineer *Dell **EMC* | Enterprise Solutions, Networking *mobile:* +33 6 79 34 90 28 <tel:+33679349028> email: nicolas.roughol@dell.com <mailto:nicolas.roughol@dell.com> Learn about Dell Networking at: www.dell.com/networking <http://www.dell.com/networking> /Etes vous satisfait de notre collaboration?/ Pour tout commentaire n'hésitez pas à contacter mon manager, Gilles_Petit@DELL.com <mailto:Gilles_Petit@DELL.com> cid:image001.jpg@01D214EB.EA5CB520Cordialement, IOGS Logo https://www.institutoptique.fr *Ludovic Vinsonnaud * - Ingénieur Réseau basé à Bordeaux, bureau F108 (IOA, Rue François Mitterrand, 33400 Talence)
*Institut Optique Graduate School* 2 Avenue Augustin Fresnel - 91127 PALAISEAU Cedex Tel. +33 5 57 01 71 52 - Mob. +33 6 08 08 41 05
Le 07/06/2017 à 15:48, Vinsonnaud Ludovic a écrit :
Hi,
I've sent an email to my Dell Networking Sales Specialist and he transferred my questions to his Networking Sales Engineer I think I will have an answer today or tomorrow.
Cordialement, IOGS Logo https://www.institutoptique.fr *Ludovic Vinsonnaud * - Ingénieur Réseau basé à Bordeaux, bureau F108 (IOA, Rue François Mitterrand, 33400 Talence)
*Institut Optique Graduate School* 2 Avenue Augustin Fresnel - 91127 PALAISEAU Cedex Tel. +33 5 57 01 71 52 - Mob. +33 6 08 08 41 05
Le 07/06/2017 à 10:19, Marcus Westin a écrit :
We also use Dell N2000-series switches to some extent, and cannot configure them through NAV at the time either (we’re primarily using Cisco, so it’s not been a huge issue so far). A configuration done manually (pretty much identical to Cisco):
description "M-CB0271A12" spanning-tree portfast switchport access vlan 30 green-mode energy-detect green-mode eee
and after changing the vlan from 30 to 206 through NAV:
description "M-CB0271A12" spanning-tree portfast switchport general pvid 206 switchport access vlan 30 green-mode energy-detect green-mode eee
Reverting to vlan 30 again does not remove the added configuration for 206.
I’ve included mibs for the latest release for the N2000-series. Hope that there’s an easy solution (
Regards, Marcus W. Linnaeus University
On 06/06/17 11:03, "John Magne Bredal" <nav-users-request@uninett.no on behalf of john.m.bredal@uninett.no> wrote:
On 02. juni 2017 17:58, Vinsonnaud Ludovic wrote: > Hello, Hi! > > Sorry about my english, I'm french so everything may not be understood :-) > > I'm new to NAV and this software seems very interesting for my needs. Thats good to hear =) > > For Dell N2048, I'm a bit confused because if I have this command > "switchport access vlan 524" already set in the switch and I ask to > change the vlan from 524 to 525 with NAV, it adds this command > "switchport general pvid 525" but doesn't delete the old one. > So why change a "switchport access" by a "switchport general" ? Is it > better to have a "switchport mode general" in default config ? > Switchport mode access is the default mode, the 2 combined commands will > not work as intended I think ? We are unfamiliar with Dell switches - PortAdmin has been used extensively with Cisco and HP but I don't know about Dell. However, we use standard MIBs for all equipment except Cisco. So, what PortAdmin does when changing vlan is to alter the dot1qPvid-value which is located in the Q-BRIDGE-MIB. http://www.mibdepot.com/cgi-bin/getmib3.cgi?win=mib_a&r=alcatel&f=IETF_Q_BRIDGE.mib&v=v2&t=tree It seems Dell has another way of doing it that does not conform exactly to the Q-BRIDGE-MIB. If you have the MIB for the switch, then we could take a look at it and see if there is anything we can do. > I've not yet tested S4048 and N4064. > > -- > > Regards, > IOGS Logo <https://www.institutoptique.fr> > *Ludovic Vinsonnaud * - Ingénieur Réseau > basé à Bordeaux, bureau F108 (IOA, Rue François Mitterrand, 33400 Talence) > > *Institut Optique Graduate School* > 2 Avenue Augustin Fresnel - 91127 PALAISEAU Cedex > Tel. +33 5 57 01 71 52 - Mob. +33 6 08 08 41 05 > -- John Magne Bredal john.m.bredal@uninett.no +4791897366 Abels gt. 5- Teknobyen NO-7465 Trondheim