Hello nav users!
When adding a new device EdgeCore ES4612 not provide information about activity at the ports. At Home > Reports > Switch ports: indicated only ifindex, module and port.
via snmp everything looks fine:
%snmpwalk -v2c -c some 172.16.2.49 ifSpeed IF-MIB::ifSpeed.1 = Gauge32: 1000000000 IF-MIB::ifSpeed.2 = Gauge32: 1000000000 IF-MIB::ifSpeed.3 = Gauge32: 1000000000 IF-MIB::ifSpeed.4 = Gauge32: 1000000000 IF-MIB::ifSpeed.5 = Gauge32: 1000000000 IF-MIB::ifSpeed.6 = Gauge32: 1000000000 IF-MIB::ifSpeed.7 = Gauge32: 1000000000 IF-MIB::ifSpeed.8 = Gauge32: 1000000000 IF-MIB::ifSpeed.9 = Gauge32: 1000000000 IF-MIB::ifSpeed.10 = Gauge32: 1000000000 IF-MIB::ifSpeed.11 = Gauge32: 1000000000 IF-MIB::ifSpeed.12 = Gauge32: 1000000000
%snmpwalk -v2c -c some 172.16.2.49 ifOperStatus IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.2 = INTEGER: up(1) IF-MIB::ifOperStatus.3 = INTEGER: up(1) IF-MIB::ifOperStatus.4 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.5 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.6 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.7 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.8 = INTEGER: lowerLayerDown(7) IF-MIB::ifOperStatus.9 = INTEGER: up(1) IF-MIB::ifOperStatus.10 = INTEGER: up(1) IF-MIB::ifOperStatus.11 = INTEGER: up(1) IF-MIB::ifOperStatus.12 = INTEGER: up(1) IF-MIB::ifOperStatus.19 = INTEGER: up(1)
Any idea ?