Hello,
Do you have any clue because it's really annoying
I tried also with N4064 and the problem is the same as N2048P
Before I use NAV to modify the description :
BDX-SW-S0-2#show running-config interface te1/0/1 description "IOGS Enseignement B2 SR0.2.1"
BDX-SW-S0-2#show startup-config | begin 1/0/1 interface Te1/0/1 description "IOGS Recherche B2 SR0.2.1"
After I use NAV :
BDX-SW-S0-2#show running-config interface te1/0/1 description "IOGS Enseignement B2 SR0.2.1 Test"
BDX-SW-S0-2#show startup-config | begin 1/0/1 interface Te1/0/1 description "IOGS Recherche B2 SR0.2.1"
How can I check something ?
Cordialement, IOGS Logo https://www.institutoptique.fr *Ludovic Vinsonnaud * - Ingénieur Réseau basé à Bordeaux, bureau F108 (IOA, Rue François Mitterrand, 33400 Talence)
*Institut Optique Graduate School* 2 Avenue Augustin Fresnel - 91127 PALAISEAU Cedex Tel. +33 5 57 01 71 52 - Mob. +33 6 08 08 41 05
Le 29/01/2019 à 18:17, Vinsonnaud Ludovic a écrit :
Hello,
When I use portadmin on a Dell N2048P, I change a port description for example and I clic on save. It say ok for change and ok for save very quickly. If I connect on the switch, the change is ok in the running-config, but when I check the startup-config, the change isn't done. I wait a few minutes and still no change.
It is working well on Cisco 2960 and 3750 (despite sometimes it's slow if the stack is 8 switch)
Can you help me find where is the problem ?
Regards,
Cordialement, IOGS Logo https://www.institutoptique.fr *Ludovic Vinsonnaud * - Ingénieur Réseau basé à Bordeaux, bureau F108 (IOA, Rue François Mitterrand, 33400 Talence)
*Institut Optique Graduate School* 2 Avenue Augustin Fresnel - 91127 PALAISEAU Cedex Tel. +33 5 57 01 71 52 - Mob. +33 6 08 08 41 05