It says SNMPv2-MIB as Source for the switch.
Maby it's good with many virtual PSUs! (** is looking what "internet" says about that...) :P
/Mattias
----- Ursprungligt meddelande ----- Från: "Morten Brekkevold" morten.brekkevold@uninett.no Till: "Mattias Söderholm" mattias.soderholm@malax.fi Kopia: "nav-users" nav-users@uninett.no Skickat: fredag, 11 mar 2016 15:25:43 Ämne: Re: Portadmin - Problem with changing Vlan
On Tue, 8 Mar 2016 12:46:37 +0200 Mattias Söderholm mattias.soderholm@malax.fi wrote:
When I run `naventity´ I don't see anything wrong (I also checked with an other switch, but the look the same). The switch have been in a stack before but being removed. I have tried to remove everything that have something to do with stacking from it.
I'd direct you to the /report/chassis_models report, but I just realized this report doesn't tell you which MIB the information came from, which could contain some clues as to what is going on here.
Could you add "source" to the list of columns in the "SELECT" clause of the "chassis_models" report in `/etc/nav/report/report.conf` and check the output of this web report for the switch in question?
But it have a little to much power supplys!
You don't care for PSU redundancy? ;)