Hello,
I found a problem wih NAV portadmin configuration page for Juniper EX series
I ran wildcard changes to unused interfaces, and I disabled them manually with junos set command [ set interfaces <port number> disable ]
However, in the NAV portadmin page configuration, the port status of those interfaces is still enabled. (checkbox checked) Interface => NAV: enabled / JunOS: disabled
When I uncheck the enable checkbox, and save changes, the NAV portadmin page show disabled, and the port is still disabled in junos console. Interface => NAV: disabled / JunOS: disabled
If enable and save changes again into NAV, and the port is next enabled in console. Interface => NAV: enabled / JunOS: enabled
If I manually update the interface description with junos set command, and update NAV portadmin page, the description field is updated.
Does NAV run netconf or snmp checkings before showing the portadmin page, or it does only rely on last database readings for portadmin state ?
It makes some confusion, because we think the interface is enabled and working into NAV portadmin page, but it's not in reality.
Regards,
Ludovic FOUR SSI DR10 CNRS - Support Infoprox Pharma FRANCE