Hello,
I might be the one not searching good enough, but I couldn't really find anywhere to put a feature request on Launchpad. As I've seen quite a few suggestions on stuff on this list, I might as well give it a shot here. One of many NAV features we've found handy, is the Module State warning feature. What I really don't understand, is why NAV haven't built in a PSU State warning system. There are numerous of MIBs under the CISCO-ENVMON-MIB http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-ENVMON-MIB tree for this task. A Cisco specific MIB for the general PSU status would be "1.3.6.1.4.1.9.9.13.1.5.1", and would give you the following result on:
Cisco 65XX series:
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1 = STRING: "Power Supply 1, WS-CAC-2500W" SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2 = STRING: "Power Supply 2, WS-CAC-2500W" SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1 = INTEGER: 1 SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.2 = INTEGER: 1 SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1 = INTEGER: 2 SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.2 = INTEGER: 2
Cisco 35XX series:
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1003 = STRING: "Sw1, PS1 Normal, RPS NotExist" SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1003 = INTEGER: 1 SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1003 = INTEGER: 2
Cisco 45XX series:
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1 = STRING: "Power Supply 1" SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2 = STRING: "Power Supply 2" SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1 = INTEGER: 1 SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.2 = INTEGER: 1 SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1 = INTEGER: 2 SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.2 = INTEGER: 2
The status integers for the power supply MIB are pretty much alike the Module State warning integers, so implementing such a feature wouldn't be a big problem. And the graphical interface/warning would look pretty much the same as the Module State thing when browsing a device, or as a Power Supply failure on the Status page.. I don't know about others, but I like to get a warning when my power equipment fails, or we're having a power failure :)
Any thoughts?
------------------------------------------------------ Vidar Stokkenes Konsulent Nettverk Seksjon for nettverk og telekom HN IKT - Tromsø
Tlf: 76 16 61 87 / 77 66 99 55 Mobil: 95 87 99 42 e-post: vidar.stokkenes@hn-ikt.nomailto:vidar.stokkenes@hn-ikt.no [cid:image001.png@01C90F3D.BA283A30]