On 03. feb. 2016 09:58, Mattias Söderholm wrote:
Hi. We have now inserted some HP 5130 EI (also HP 5700) switches in NAV and want to use PortAdmin. Everything works except saving to memory.
The problem is the save command! For HP Procurve switches you use "save" or "write memory" commands to save changes and it's done. HP 5130 EI is a little bit different. There you must use "save force", if you only use "save" command you have to answer some questions.
Can this be fixed?
For HP-devices Portadmin does not really execute a save-command on the device. When we implemented the support for HP-devices in Portadmin this was not necessary. For Cisco devices this is done by issuing a 'write mem' when the changes are done.
It is however very possible that upgrades on software and new types of equipment now requires the equivalent of a 'write mem' on HP aswell. In that case it must be implemented.
If you have any information about how to do this (mibs, oids or documentation regarding that) that would be very helpful.
Live long and prosper