- Nav-users - lister.unit.no

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 05 Jan '06

05 Jan '06

On Wednesday 04 January 2006 13:41, Vidar Faltinsen wrote: > On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > > > Missing subinterfaces are on different modules... > > > > What I should check? > > > > MRTG is working with this routers with no problem. > > MRTG has traffic counters for the interfaces that NAV are missing? > > You should verify what the router returns of ifindexes/ifdescr from > the interfaces MIB. I know the support has been varying in respect > to fast/gigethernet-based subinterface support. At one point ios > gave us the ifindexes, but the octet counters were not maintained. > > Do a snmpwalk directly to the router in question, something like: > > snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr > > or > > snmpwalk -On -c <snmp read community> -v2c <ip address> > .1.3.6.1.2.1.2.2.1.2 > I have similar problems with one of our 2900 catalyst switch with ATM port, snmpwalk shows interfaces, nav not. In cricket there is only CPU statistics. Question no1: What is the best way to debug such problems? Question no2: What about adding user-specific OIDs? Any help to this nav-section? regards -- Woj >From odd.hauge at hiMolde.no Thu Jan 5 23:45:36 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Fri Jan 6 00:11:49 2006 Subject: [Nav-users] Problems adding users Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C21B8C17(a)stam.himolde.no> FYI: A recompile of Nav (bleeding edge) solved the problem. Nothings better ;) - odd arne > -----Original Message----- > From: Hauge Odd Arne > Sent: Thursday, January 05, 2006 8:51 AM > To: Hauge Odd Arne; nav-users(a)itea.ntnu.no > Subject: RE: [Nav-users] Problems adding users > > Seems like som postgres problem to me. After trying to add a > new user I did a ps command on the nav-box: > postgres 5836 0.0 2.9 41216 14936 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55524) idle in > transaction > postgres 5850 0.0 3.0 41480 15908 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55530) idle in > transaction > postgres 5852 0.0 2.9 41216 14940 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55532) idle in > transaction > postgres 5856 0.0 2.8 41216 14848 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55534) INSERT waiting > > I'm not sure what the idle in transaction and insert waiting means... > It seems to me it's only the navprofiles database I have > problems adding information into. I can not add new accounts > or groups. But I can manage profiles for existing nav users > (read admin user). > > - odd arne hauge > > > > > > > -----Original Message----- > > From: nav-users-bounces(a)itea.ntnu.no > > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Hauge Odd Arne > > Sent: Wednesday, January 04, 2006 3:47 PM > > To: nav-users(a)itea.ntnu.no > > Subject: [Nav-users] Problems adding users > > > > Hi. > > > > While testing the bleeding edge of Nav I'm having problem adding > > users. > > I get the following output in my browser when I tries to add a new > > user: > > "no such account 1000" > > > > Any suggestions ? > > > > Regards > > Odd Arne Hauge > > > > > > _______________________________________________ > > Nav-users mailing list > > Nav-users(a)itea.ntnu.no > > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > >

1 0

SV: Re: SV: [Nav-users] logger.conf
by peder.sefland＠hivolda.no 04 Jan '06

04 Jan '06

> Do you have any false alerts on dns-mismatch? I'm not shure that this > has anything to do with this. > > All device names are resolved correctly, beacuse all hostname informations are in NAV machine /etc/hosts file. -- Woj Is this how it should work? I have thought that my colleagues at computer-dep. only needs to registrer their servers or wireless in the web-interface, but not to edit /etc/host file on the nav-box. Peder >From odd.hauge at hiMolde.no Thu Jan 5 08:50:57 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Jan 5 08:51:06 2006 Subject: [Nav-users] Problems adding users Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C27D128E(a)stam.himolde.no> Seems like som postgres problem to me. After trying to add a new user I did a ps command on the nav-box: postgres 5836 0.0 2.9 41216 14936 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55524) idle in transaction postgres 5850 0.0 3.0 41480 15908 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55530) idle in transaction postgres 5852 0.0 2.9 41216 14940 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55532) idle in transaction postgres 5856 0.0 2.8 41216 14848 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55534) INSERT waiting I'm not sure what the idle in transaction and insert waiting means... It seems to me it's only the navprofiles database I have problems adding information into. I can not add new accounts or groups. But I can manage profiles for existing nav users (read admin user). - odd arne hauge > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Hauge Odd Arne > Sent: Wednesday, January 04, 2006 3:47 PM > To: nav-users(a)itea.ntnu.no > Subject: [Nav-users] Problems adding users > > Hi. > > While testing the bleeding edge of Nav I'm having problem > adding users. > I get the following output in my browser when I tries to add > a new user: > "no such account 1000" > > Any suggestions ? > > Regards > Odd Arne Hauge > > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

1 0

A couple of bugs
by kjetil.olsen＠usit.uio.no 04 Jan '06

04 Jan '06

We have problems when we configure IP-addresses directly on physical interfaces on routers (cisco catalysts or ordinary cisco-routers e.g. 7206) and connect them to switches (we use switches to interconnect several routers). The interfaces are discovered by gdd, but not placed in the correct VLAN even if we use the correct description-field (with VLAN ID) and the VLAN is known to NAV, and the switch is correctly configured with VLAN. This messes up the traffic-map, making it usesless.... (In NAV2 this works like a charm....) I would think that more detailed debugging is needed :-) Contact nett-drift(a)usit.uio.no to get access. And while I'm at it.... A second bug (that I think has been mentioned before, but): The cricket-config does not contain the correct decription-fields on routers. The router is OK, and the "Router ports" report (.../report/gwport) is also OK, but cricket says "No decription available". On switches we do not see this problem, port descriptions show up fine in cricket. I guess that "makecricketconfig" is to blame in one way or another :-) And a third one :-) In the traffic-map I can right-click on a router and get a router-menu. Choosing "Netlist" tryes to access cricket, not the reports.... --Kjetil

2 1

Feature requests anyone?
by kjetil.olsen＠usit.uio.no 04 Jan '06

04 Jan '06

Use of SNMPv2-counters (64-bit) in cricket. We have a number of interfaces that already have problems with interfaces having more than 2^32 bytes pr minute of traffic. --Kjetil

1 0

Feature requests anyone?
by Vidar.Faltinsen＠uninett.no 04 Jan '06

04 Jan '06

Hi, As I mentioned in a previous posting NTNU and UNINETT are currently planning the 2006 NAV activity. We are more ambitious this year and are prepared to put a lot of resources into maintaining and further developing NAV. We are currently working on a list of new features to implement. I could present the list, but at this stage I will rather ask the NAV community... what do you want? We certainly have some ideas ourselves, partly based on feedback, both on- and offline. Nevertheless, please empty your (navish) heart and express your wishes! This is your chance (well, one of them). We are interested in request for both the short and long term. I assume more smooth installation, maybe support for certain equipment types, etc, is on the list. Further - in terms of new and/or improved functionality - what would you like? As NAV is an open source project, contributions are very much welcome. If you have plans or hopes in this respect, please let us know. All input is of value. This includes criticism. Looking forward to this thread! - Vidar >From woj at tstd.pl Wed Jan 4 14:08:58 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:09:16 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> References: <200601041322.24818.woj(a)tstd.pl> <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> Message-ID: <200601041408.59366.woj(a)tstd.pl> On Wednesday 04 January 2006 13:41, you wrote: > On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > > > Missing subinterfaces are on different modules... > > > > What I should check? > > > > MRTG is working with this routers with no problem. > > MRTG has traffic counters for the interfaces that NAV are missing? yes, I am using in mrtg simply: ./cfgmaker <snmp read community>@$<ip address> > mrtg_file.cfg I just checked, mrtg also can't see fast ethernet subinterfaces, but it can see main fast etherent interfaces, and ALL atm subinterfaces. Missing (in NAV) atm interfaces are configured typically. > You should verify what the router returns of ifindexes/ifdescr from > the interfaces MIB. I know the support has been varying in respect > to fast/gigethernet-based subinterface support. At one point ios > gave us the ifindexes, but the octet counters were not maintained. > > Do a snmpwalk directly to the router in question, something like: > > snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr > > or > > snmpwalk -On -c <snmp read community> -v2c <ip address> > .1.3.6.1.2.1.2.2.1.2 > I did it. I can see there missing atm subinterfaces, and fast Ethernet interfaces but no fast ethernet subinterfaces (802.1q). regards, thanks for help -- Woj >From woj at tstd.pl Wed Jan 4 14:16:53 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:17:09 2006 Subject: [Nav-users] Cricket error In-Reply-To: <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BBC1DB.7030408(a)ntnu.no> <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> Message-ID: <200601041416.54494.woj(a)tstd.pl> On Wednesday 04 January 2006 13:47, Kristian Eide wrote: > > I am not sure how to add OID's to NAV without messing with the database, > > perhaps some other NAV-developer may answer this? > > I think editDB has support for adding new OIDs. > Yes, there is, but I can't find descriptions Howto fill form: OID key * Snmpoid * OID source Match regexp OID name MIB Description Can somebody give some detailed info, how to fill these fields, and how will this work with cricket? regards -- Woj >From ddeineka at gmail.com Wed Jan 4 15:39:43 2006 From: ddeineka at gmail.com (Dmitry Deineka) Date: Wed Jan 4 14:39:53 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> References: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> Message-ID: <a6fee5220601040539h59214bc6h(a)mail.gmail.com> So, Happy New Year to all ! I with to say thanks to NAV developers and community for great monitoring/network inventory software (but a bit difficult for install :-) We switch from nagios to NAV for number of reasons: 1) More visualizations 2) More reports 3) Great search functions (per mac, vlan, ports etc). Its really great! What I need with NAV: 1) SNMP trap handling. For example, we have number of small POPs with APC Smart UPS+AP9617 mgmnt cards installed. I wish to monitor power outages within NAV - for our duty staff (much less skilled than noc people :) is better to see one application on screen 2) SNMP polling and thresholds. Is link quality bad ? Is interface load too high or too low ? 3) More FreeBSD support. I think that following message from archive must be on NAV wiki: http://desperados.itea.ntnu.no/pipermail/nav-users/2005-December/001117.html With best regards, Dmitry 2006/1/4, Vidar Faltinsen <Vidar.Faltinsen(a)uninett.no>: > > Hi, > > > We are currently working on a list of new features to implement. > I could present the list, but at this stage I will rather ask the > NAV community... what do you want? > - Vidar > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > -- Dmitry A.Deineka >From woj at tstd.pl Wed Jan 4 14:59:11 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:59:31 2006 Subject: [Nav-users] logger.conf Message-ID: <200601041459.11900.woj(a)tstd.pl> Hello, how should be cisco box configured to have correct analyse in NAV Syslog Analyzer? I have cisco communicates in following format: Jan 4 14:50:47 <router_name> 2951: Jan 4 13:50:46: %SYS-5-CONFIG_I: Configured from console by vty0 (<ip>) I can see this communicates in NAV, but only in: https://nav_ip/logger/?error ("parsing errors" link) Thanks for info regards -- Woj >From peder.sefland at hivolda.no Wed Jan 4 15:14:48 2006 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Wed Jan 4 15:15:16 2006 Subject: SV: [Nav-users] logger.conf Message-ID: <s3bbe67d.030(a)HVO-3.hivolda.no> I have experience the same thing. But some of my switches that has only ip-adresse and no dns-name turn up in the Syslog Analyser. All the others turn up under "parsing errors" link. Do you have any false alerts on dns-mismatch? I'm not shure that this has anything to do with this. Peder Sefland >>> Wojciech Kozicki <woj(a)tstd.pl> 04.01.2006 14:59:11 >>> Hello, how should be cisco box configured to have correct analyse in NAV Syslog Analyzer? I have cisco communicates in following format: Jan 4 14:50:47 <router_name> 2951: Jan 4 13:50:46: %SYS-5-CONFIG_I: Configured from console by vty0 (<ip>) I can see this communicates in NAV, but only in: https://nav_ip/logger/?error ("parsing errors" link) Thanks for info regards -- Woj _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >From woj at tstd.pl Wed Jan 4 15:20:18 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 15:20:35 2006 Subject: SV: [Nav-users] logger.conf In-Reply-To: <s3bbe67d.031(a)HVO-3.hivolda.no> References: <s3bbe67d.031(a)HVO-3.hivolda.no> Message-ID: <200601041520.19244.woj(a)tstd.pl> On Wednesday 04 January 2006 15:14, Peder Magne Sefland wrote: > I have experience the same thing. But some of my switches that has only > ip-adresse and no dns-name turn up in the Syslog Analyser. All the > others turn up under "parsing errors" link. > > Do you have any false alerts on dns-mismatch? I'm not shure that this > has anything to do with this. > > All device names are resolved correctly, beacuse all hostname informations are in NAV machine /etc/hosts file. -- Woj >From Vidar.Faltinsen at uninett.no Wed Jan 4 15:28:53 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 15:29:12 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <7DA8B65EACA61E4B8DC3FA6668A53E420FF471(a)edxmb3.jdnet.deere.com> References: <7DA8B65EACA61E4B8DC3FA6668A53E420FF471(a)edxmb3.jdnet.deere.com> Message-ID: <Pine.LNX.4.64.0601041525220.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, McDermott Troy wrote: > First off, thank you all very much for creating and maintaining this > software; it's made my job (and life) much easier. ...and life - wow! Thank you! > One little suggestion: a non-cisco syslog module, where syslog output > from devices like UPS, non-cisco switches, and so on could be viewed > through the web interface. Even something simple that would be > searchable with text strings and regexp would be very helpful. Thank you for your input. We will definitely consider this. > Thanks for asking! > > -Troy - Vidar > >> -----Original Message----- >> From: nav-users-bounces(a)itea.ntnu.no >> [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Vidar Faltinsen >> Sent: Wednesday, January 04, 2006 7:02 AM >> To: nav-users(a)itea.ntnu.no >> Subject: [Nav-users] Feature requests anyone? >> >> Hi, >> >> As I mentioned in a previous posting NTNU and UNINETT are >> currently planning the 2006 NAV activity. We are more >> ambitious this year and are prepared to put a lot of >> resources into maintaining and further developing NAV. >> >> We are currently working on a list of new features to implement. >> I could present the list, but at this stage I will rather ask >> the NAV community... what do you want? >> >> We certainly have some ideas ourselves, partly based on >> feedback, both on- and offline. Nevertheless, please empty >> your (navish) heart and express your wishes! This is your >> chance (well, one of them). >> >> We are interested in request for both the short and long term. >> >> I assume more smooth installation, maybe support for certain >> equipment types, etc, is on the list. Further - in terms of >> new and/or improved functionality - what would you like? >> >> As NAV is an open source project, contributions are very much welcome. >> If you have plans or hopes in this respect, please let us know. >> >> All input is of value. This includes criticism. Looking >> forward to this thread! >> >> - Vidar >> _______________________________________________ >> Nav-users mailing list >> Nav-users(a)itea.ntnu.no >> http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >> >> > >From Vidar.Faltinsen at uninett.no Wed Jan 4 15:36:38 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 15:36:48 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <a6fee5220601040539h59214bc6h(a)mail.gmail.com> References: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> <a6fee5220601040539h59214bc6h(a)mail.gmail.com> Message-ID: <Pine.LNX.4.64.0601041529320.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, Dmitry Deineka wrote: > We switch from nagios to NAV for number of reasons: > 1) More visualizations > 2) More reports > 3) Great search functions (per mac, vlan, ports etc). Its really great! Valuable feedback, on behalf of the team, thank you! > What I need with NAV: > 1) SNMP trap handling. For example, we have number of small POPs with APC > Smart UPS+AP9617 mgmnt cards installed. I wish to monitor power outages > within NAV - for our duty staff (much less skilled than noc people :) is > better to see one application on screen This is on our list to. SNMP traps will be implemented. We will also have a particular focus on power, UPS and temperature statistics and alarms. > 2) SNMP polling and thresholds. Is link quality bad ? Is interface load too > high or too low ? On the list, been there (too) long. > 3) More FreeBSD support. I think that following message from archive must be > on NAV wiki: > http://desperados.itea.ntnu.no/pipermail/nav-users/2005-December/001117.html I agree. Will be done. > With best regards, > Dmitry - Vidar

2 1

Problems adding users
by odd.hauge＠hiMolde.no 04 Jan '06

04 Jan '06

Hi. While testing the bleeding edge of Nav I'm having problem adding users. I get the following output in my browser when I tries to add a new user: "no such account 1000" Any suggestions ? Regards Odd Arne Hauge

1 0

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 04 Jan '06

04 Jan '06

On Wednesday 04 January 2006 13:40, you wrote: > Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > There are (unfortunately) two directories for router-interfaces - > giga-router-interfaces and router-interfaces. Have you checked both? I can't see them in "router ports" report and can't find IP networks which are connected to them in "prefixes" report. Simply - NAV did't detect these interfaces... -- Woj >From kreide at gmail.com Wed Jan 4 13:47:26 2006 From: kreide at gmail.com (Kristian Eide) Date: Wed Jan 4 13:47:36 2006 Subject: [Nav-users] Cricket error In-Reply-To: <43BBC1DB.7030408(a)ntnu.no> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> <200601031026.55728.woj(a)tstd.pl> <43BBC1DB.7030408(a)ntnu.no> Message-ID: <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> > I am not sure how to add OID's to NAV without messing with the database, > perhaps some other NAV-developer may answer this? I think editDB has support for adding new OIDs. -- Kristian

1 0

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 04 Jan '06

04 Jan '06

Hello, I have couple of cisco 7140, and NAV can't see all routers interfaces. In router-ports report I can see only some of ATM interfaces, but not all. Also, there is lack of Fast Etherent interfaces. I tried re-adding device to nav, but it didn't help. Missing subinterfaces are on different modules... What I should check? MRTG is working with this routers with no problem. regards -- Woj >From john.m.bredal at ntnu.no Wed Jan 4 13:38:51 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Wed Jan 4 13:38:02 2006 Subject: [Nav-users] Cricket error In-Reply-To: <200601031026.55728.woj(a)tstd.pl> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> <200601031026.55728.woj(a)tstd.pl> Message-ID: <43BBC1DB.7030408(a)ntnu.no> Wojciech Kozicki wrote: > > I have some additional question, is there way to put some user-specific OIDs > to NAV-Cricket? > For example - I have cisco catalyst 2900 + ATM module, NAV is not recognizing > it correctly, can I put somewhere OIDs to have statistics generated? > > regards > The easiest way would be to add configuration to the Defaults-files in Cricket and make a local directory to collect data to using those OID's. I am not sure how to add OID's to NAV without messing with the database, perhaps some other NAV-developer may answer this? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From john.m.bredal at ntnu.no Wed Jan 4 13:40:32 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Wed Jan 4 13:39:41 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <200601041322.24818.woj(a)tstd.pl> References: <200601041322.24818.woj(a)tstd.pl> Message-ID: <43BBC240.6000303(a)ntnu.no> Wojciech Kozicki wrote: > Hello, > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > router-ports report I can see only some of ATM interfaces, but not all. Also, > there is lack of Fast Etherent interfaces. I tried re-adding device to nav, > but it didn't help. There are (unfortunately) two directories for router-interfaces - giga-router-interfaces and router-interfaces. Have you checked both? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From Vidar.Faltinsen at uninett.no Wed Jan 4 13:41:16 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 13:41:23 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <200601041322.24818.woj(a)tstd.pl> References: <200601041322.24818.woj(a)tstd.pl> Message-ID: <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > Hello, > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > router-ports report I can see only some of ATM interfaces, but not all. Also, > there is lack of Fast Etherent interfaces. I tried re-adding device to nav, > but it didn't help. > > Missing subinterfaces are on different modules... > > What I should check? > > MRTG is working with this routers with no problem. MRTG has traffic counters for the interfaces that NAV are missing? You should verify what the router returns of ifindexes/ifdescr from the interfaces MIB. I know the support has been varying in respect to fast/gigethernet-based subinterface support. At one point ios gave us the ifindexes, but the octet counters were not maintained. Do a snmpwalk directly to the router in question, something like: snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr or snmpwalk -On -c <snmp read community> -v2c <ip address> .1.3.6.1.2.1.2.2.1.2 - Vidar

1 0

no descriptions in Cricket for router ports
by Vidar.Faltinsen＠uninett.no 03 Jan '06

03 Jan '06

On Wed, 28 Dec 2005, Wojciech Kozicki wrote: > Hello, > > my NAV is up and running (installation done by this howto: > http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4). > > I have some problems with Cricket, there is no description for router graphs. > These are cisco 7206, 750x, 7140 boxes. > > Description on routers interfaces are in following format (example): > > interface FastEthernet1/0/0.200 > description elink,xxx_gw,xxx,,200 > > And in "Router ports report", for this port I can see: > - in vlan column: "200" > - in nettype column: "elink" > - in netident: "router_name,xxx_gw" > so it is recognized correctly in NAV... > > For switches - cisco 2900, 2950 there is no problem, all interfaces are > described properly in Cricket. > > What I should check, please help. I assume you refer to the cricket overview page with all the router ports for a given router that states "no description available" in the description column. This issue is addressed and I believe solved, however I do not think it is "out there yet", John Magne can correct me if I am wrong. - Vidar

2 1

Cricket error
by john.m.bredal＠ntnu.no 03 Jan '06

03 Jan '06

kjartan.malde(a)uis.no wrote: > The powersupply on my Nav died, and since I got it back up I get these > messeges every minute. Hope anyone can help me. The messages are coming > from a one of the cards on a Cat6509. I running Nav 3.0 on CentOS. > It seems like the configuration is wrong. Cricket is trying to query an OID that does not exist, in this case the ifInErrors-counter on the various ifindexes seen in the mail. > > Error and the lines leading up to it: > [28-Dec-2005 09:12:07 ] Retrieved data for 9_15 (225): > 166758758,116225181,0,0,1572947,1109513 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_16 (226): > 10068,558308,0,0,16,8370 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_17 (227): > 571765657,1224452921,0,0,3818864,4488386 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_18 (228): > 101553,744762,0,0,589,6513 > [28-Dec-2005 09:12:07*] Received SNMP response with error code noSuchName. > OID: 1.3.6.1.2.1.2.2.1.14.229 > <snip> My guess is that the information in the database was not correct during the last creation of the config (there is one every night), and it should disappear as soon as the database comes up to date. Is the problem still there? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From john.m.bredal at ntnu.no Tue Jan 3 10:24:05 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Tue Jan 3 10:23:14 2006 Subject: [Nav-users] weird problem In-Reply-To: <200512271957.25492.woj(a)tstd.pl> References: <200512271921.22867.woj(a)tstd.pl> <200512271949.35618.woj(a)tstd.pl> <200512271957.25492.woj(a)tstd.pl> Message-ID: <43BA42B5.6040707(a)ntnu.no> Wojciech Kozicki wrote: <snip> > btw. What should I do with something like this (Nav keeps sending it to my by > email): > > [27-Dec-2005 18:40:03 ] Retrieved data for x.x.1.12 (): > 18,17,19552316,185184868,904658749,19,29 > [27-Dec-2005 18:40:03*] Cannot > update /usr/local/nav/cricket/cricket-config/../cricket-data//routers/x.x.1.12.rrd: > expected 4 data source readings (got 7) from > N:18:17:19552316:185184868:904658749:19:29:... > > x.x.1.12 is 7513 cisco router. > Quoting one of my earlier mails on this list: " Borge Brunes wrote: > Folks, > > I did an upgrade from svn 3290 to 3318, and now these messages > are popping in: > [08-Aug-2005 21:30:34*] Cannot update /usr/local/nav/cricket/cricket-config/../cricket-data//switches/tf4292-sw.infra.uit.no.rrd: expected 5 data source readings (got 4) from N:0:1:40827872:56543441:... > This problem is very common. RRDTool, which Cricket uses to store data, uses rrd-files to store data. These files, once created, does only accept a certain number of data-sets. If you try to insert more or less datasets than it can handle this error will occur. The reason for this is that NAV has detected that tf4292-sw.infra.uit.no can respond to 4 snmp values when it previously responded to 5. When it tries to store only 4 this error occurs. There is no easy/good fix to this. One solution is to delete the rrd-file so that Cricket makes a new one with 4 data-sets. This is the easiest one but will of course delete all historical data. Another solution is to dump all old data, create the new file with 4 sets and insert old data to the new file. This is more complicated though. My dream is to automate this process, but at the moment there is no time. " -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From Vidar.Faltinsen at uninett.no Tue Jan 3 10:25:39 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Tue Jan 3 10:25:45 2006 Subject: [Nav-users] NAV 3.0.0 in Debian? In-Reply-To: <200512271252.39624.woj(a)tstd.pl> References: <200512271252.39624.woj(a)tstd.pl> Message-ID: <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> On Tue, 27 Dec 2005, Wojciech Kozicki wrote: > 1. Will be NAV ported to Debian? Our ambition is definitely to maintain an updated NAV debian package. UNINETT and NTNU are currently planning our 2006 joint activity. There will be a remarkably increase in activity compared to the relatively slow 2005. The primary OS for UNINETT is debian (our so-called samson3 platform). We will make sure the dedian package is maintained and up to date. The current status is that a 3.0 package is in the making, final testing needs to be done. I cannot commit a date for this, as of now, but we are definitely addressing this and other pressing NAV issues. Hang in there. - Vidar >From woj at tstd.pl Tue Jan 3 10:26:54 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Jan 3 10:27:09 2006 Subject: [Nav-users] Cricket error In-Reply-To: <43BA40F0.1010406(a)ntnu.no> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> Message-ID: <200601031026.55728.woj(a)tstd.pl> On Tuesday 03 January 2006 10:16, John Magne Bredal wrote: > kjartan.malde(a)uis.no wrote: > > The powersupply on my Nav died, and since I got it back up I get these > > messeges every minute. Hope anyone can help me. The messages are coming > > from a one of the cards on a Cat6509. I running Nav 3.0 on CentOS. > > It seems like the configuration is wrong. Cricket is trying to query an > OID that does not exist, in this case the ifInErrors-counter on the > various ifindexes seen in the mail. > [...] I have some additional question, is there way to put some user-specific OIDs to NAV-Cricket? For example - I have cisco catalyst 2900 + ATM module, NAV is not recognizing it correctly, can I put somewhere OIDs to have statistics generated? regards -- Woj >From woj at tstd.pl Tue Jan 3 10:33:55 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Jan 3 10:34:09 2006 Subject: [Nav-users] NAV 3.0.0 in Debian? In-Reply-To: <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> References: <200512271252.39624.woj(a)tstd.pl> <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> Message-ID: <200601031033.55815.woj(a)tstd.pl> On Tuesday 03 January 2006 10:25, Vidar Faltinsen wrote: > On Tue, 27 Dec 2005, Wojciech Kozicki wrote: > > 1. Will be NAV ported to Debian? > > Our ambition is definitely to maintain an updated NAV debian package. > UNINETT and NTNU are currently planning our 2006 joint activity. There > will be a remarkably increase in activity compared to the relatively > slow 2005. It is really great to hear it! Nav is really good piece of software, but its evolution is quite slow. > The primary OS for UNINETT is debian (our so-called samson3 platform). > We will make sure the dedian package is maintained and up to date. > The current status is that a 3.0 package is in the making, final > testing needs to be done. I cannot commit a date for this, as of now, > but we are definitely addressing this and other pressing NAV issues. > nice... best regards -- Woj

2 1

nav is not monitoring
by perica＠akton.com.mk 03 Jan '06

03 Jan '06

Hi, Looks like my 3.0.b10 nav installation isn't doing the automated processes like it should. I'm pretty sure I've done the seeding process correctly, and nav isn't showing any error's. The problem is in that nav isn't monitoring new ip devices I add. i.e. if I plug out a router that is in nav's db, it still shows it as UP, hence my alert profile doesn't work. Also nav makes cricket targets only for sysuptime, no interface targets. I need help in tracking this problem. Note: I have no switches, cabling and patches entered in the nav db, maybe the problem is there!? Also I don't have a switch that has snmp support, where/how do I enter such equipment in nav's db? Perica Veljanovski

3 2

nav not making targets for cricket
by perica＠akton.com.mk 03 Jan '06

03 Jan '06

Hi I got my NAV 3.0 beta10 working on FreeBSD 5.4. I added a new vendor "bintec", and 2 types X4300 and X1200II. Then added 2 IP devices category GW which are bintec routers respectively to the types. makecricketconfig.pl made targets only in /cricket-config/routers/ ! Bintec uses standard IF-MIB, and from what I've read, makecricketconfig.pl should make cricket targets for bintec interfaces!? What am I doing wrong? Could you explain the process in detail, or refer me to a former discussion or man!? Perica Veljanovski

2 1

Difference between netboxid and deviceid
by Borge.Brunes＠cc.uit.no 02 Jan '06

02 Jan '06

see subject. The reason why I ask? I get a lot of these in getDeviceData-stderr.log : SQLException for update statement: UPDATE netbox SET deviceid='4177' WHERE netboxid='374' org.postgresql.util.PSQLException: ERROR: duplicate key violates unique constraint "netbox_deviceid_key SQLException for update statement: UPDATE netbox SET deviceid='4177' WHERE netboxid='377' org.postgresql.util.PSQLException: ERROR: duplicate key violates unique constraint "netbox_deviceid_key" manage=# select * from netbox WHERE deviceid='4177'; netboxid | ip | roomid | typeid | deviceid | ----------+--------------+----------+--------+----------+ 369 | 129.242.X.X | fp2N4119 | 16 | 4177 | It's three Cisco AP1200 (witch different serial#) fighting about "deviceid='4177'" regards, -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

1 0

Manually adding router2router connection (possible?)
by Vidar.Faltinsen＠uninett.no 02 Jan '06

02 Jan '06

On Wed, 28 Dec 2005, Kristian Eide wrote: >> ATM-interfaces are correctly discovered in NAV - in "router ports report" I >> can see them with almost all informations but "Vlan number". Is there ANY way >> to make NAV see ATM-point-to-point connections? > > Yes, you can set the description field on the router interface which > NAV will then interpret. Unfortunately the only doc I can find here is > in Norwegian: > > http://metanav.ntnu.no/v2/admindok/navrunkonv.html > > Do we have an English version of this document? Yes, we do, http://metanav.ntnu.no/moin.cgi/SubnetsAndVlans#guide-lines-for-configuring… > The short version is > that the router description should be: > > link,$to_router[,$comment,$vlan] > > -- > Kristian - Vidar

1 0

Manually adding router2router connection (possible?)
by woj＠tstd.pl 29 Des '05

29 Des '05

On Wednesday 28 December 2005 10:18, Kristian Eide wrote: > > ATM-interfaces are correctly discovered in NAV - in "router ports report" > > I can see them with almost all informations but "Vlan number". Is there > > ANY way to make NAV see ATM-point-to-point connections? > > Yes, you can set the description field on the router interface which > NAV will then interpret. Unfortunately the only doc I can find here is > in Norwegian: > > http://metanav.ntnu.no/v2/admindok/navrunkonv.html So, is there english version? > Do we have an English version of this document? The short version is > that the router description should be: > > link,$to_router[,$comment,$vlan] "$to_router" should be dns name of router? This name which is used in NAV for box? thanks for info... -- Wojciech Kozicki

2 3

Manually adding router2router connection (possible?)
by woj＠tstd.pl 28 Des '05

28 Des '05

On Wednesday 28 December 2005 10:18, Kristian Eide wrote: > > ATM-interfaces are correctly discovered in NAV - in "router ports report" > > I can see them with almost all informations but "Vlan number". Is there > > ANY way to make NAV see ATM-point-to-point connections? > > Yes, you can set the description field on the router interface which > NAV will then interpret. Unfortunately the only doc I can find here is > in Norwegian: > > http://metanav.ntnu.no/v2/admindok/navrunkonv.html > > Do we have an English version of this document? The short version is > that the router description should be: > > link,$to_router[,$comment,$vlan] I have my descriptions in this format, but still no desc. for routers interfaces in cricket. And more, some switches (nothing special, typical 2900 with atm interface) are properly recognized in NAV, but in Cricket can't see interfaces, only CPU. This switches have both - Ethernet and ATM interfaces... So, question is - what is the best way to debug cricket problems? I changed /usr/local/nav/bin/makecricketconfig.pl and put it into debug mode, but I don't know what to search... regards and thanks for answer... Woj -- ?yj tak, aby znajomym zrobi?o si? nudno, gdy umrzesz -- Julek Tuwim

2 2

weird problem
by woj＠tstd.pl 27 Des '05

27 Des '05

On Tuesday 27 December 2005 19:49, Wojciech Kozicki wrote: [cut the trash] I am sorry for last two messages - problem is solved, there was no ADMIN_email in: /usr/local/nav/etc/nav.conf sorry once again btw. What should I do with something like this (Nav keeps sending it to my by email): [27-Dec-2005 18:40:03 ] Retrieved data for x.x.1.12 (): 18,17,19552316,185184868,904658749,19,29 [27-Dec-2005 18:40:03*] Cannot update /usr/local/nav/cricket/cricket-config/../cricket-data//routers/x.x.1.12.rrd: expected 4 data source readings (got 7) from N:18:17:19552316:185184868:904658749:19:29:... x.x.1.12 is 7513 cisco router. regards -- Woj >From woj at tstd.pl Wed Dec 28 08:54:25 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Dec 28 08:55:10 2005 Subject: [Nav-users] no descriptions in Cricket for router ports Message-ID: <200512280854.26051.woj(a)tstd.pl> Hello, my NAV is up and running (installation done by this howto: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4). I have some problems with Cricket, there is no description for router graphs. These are cisco 7206, 750x, 7140 boxes. Description on routers interfaces are in following format (example): interface FastEthernet1/0/0.200 description elink,xxx_gw,xxx,,200 And in "Router ports report", for this port I can see: - in vlan column: "200" - in nettype column: "elink" - in netident: "router_name,xxx_gw" so it is recognized correctly in NAV... For switches - cisco 2900, 2950 there is no problem, all interfaces are described properly in Cricket. What I should check, please help. -- Woj >From woj at tstd.pl Wed Dec 28 09:54:40 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Dec 28 09:55:10 2005 Subject: [Nav-users] Manually adding router2router connection (possible?) Message-ID: <200512280954.41512.woj(a)tstd.pl> Hello again, I hope that somebody is reading this, and I'm not in Yours kill-files yet ;-) I have many ATM-connections between routers. As far as I know Nav has got problems with auto-detecting such connections. My question: - is possible to "tell" Nav that particular connection exists? Or howto manage ATM-connections. I would like to have such connections in traffic-map... ATM-interfaces are correctly discovered in NAV - in "router ports report" I can see them with almost all informations but "Vlan number". Is there ANY way to make NAV see ATM-point-to-point connections? regards -- Woj >From kjartan.malde at uis.no Wed Dec 28 10:10:04 2005 From: kjartan.malde at uis.no (kjartan.malde(a)uis.no) Date: Wed Dec 28 10:10:10 2005 Subject: [Nav-users] Cricket error Message-ID: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> The powersupply on my Nav died, and since I got it back up I get these messeges every minute. Hope anyone can help me. The messages are coming from a one of the cards on a Cat6509. I running Nav 3.0 on CentOS. Rgds Kjartan Error and the lines leading up to it: [28-Dec-2005 09:12:07 ] Retrieved data for 9_15 (225): 166758758,116225181,0,0,1572947,1109513 [28-Dec-2005 09:12:07 ] Retrieved data for 9_16 (226): 10068,558308,0,0,16,8370 [28-Dec-2005 09:12:07 ] Retrieved data for 9_17 (227): 571765657,1224452921,0,0,3818864,4488386 [28-Dec-2005 09:12:07 ] Retrieved data for 9_18 (228): 101553,744762,0,0,589,6513 [28-Dec-2005 09:12:07*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.229 Error and the lines leading up to it: [28-Dec-2005 09:12:07 ] Retrieved data for 9_17 (227): 571765657,1224452921,0,0,3818864,4488386 [28-Dec-2005 09:12:07 ] Retrieved data for 9_18 (228): 101553,744762,0,0,589,6513 [28-Dec-2005 09:12:07*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.229 [28-Dec-2005 09:12:07 ] Walking ifIndex for *.*.*.*:161 to resolve interface-index mapping [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.229 Error and the lines leading up to it: [28-Dec-2005 09:12:08 ] Retrieved data for 9_19 (229): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_19 (229). [28-Dec-2005 09:12:08 ] Retrieved data for 9_19 (229): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_19 (229). [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.230 [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.230 Error and the lines leading up to it: [28-Dec-2005 09:12:08 ] Retrieved data for 9_20 (230): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_20 (230). [28-Dec-2005 09:12:08 ] Retrieved data for 9_20 (230): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_20 (230). [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.231 [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.231 Error and the lines leading up to it: [28-Dec-2005 09:12:08 ] Retrieved data for 9_21 (231): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_21 (231). [28-Dec-2005 09:12:08 ] Retrieved data for 9_21 (231): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_21 (231). [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.232 [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.232 Error and the lines leading up to it: [28-Dec-2005 09:12:08 ] Retrieved data for 9_22 (232): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_22 (232). [28-Dec-2005 09:12:08 ] Retrieved data for 9_22 (232): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_22 (232). [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.233 [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.233 >From kreide at gmail.com Wed Dec 28 10:18:15 2005 From: kreide at gmail.com (Kristian Eide) Date: Wed Dec 28 10:18:42 2005 Subject: [Nav-users] Manually adding router2router connection (possible?) In-Reply-To: <200512280954.41512.woj(a)tstd.pl> References: <200512280954.41512.woj(a)tstd.pl> Message-ID: <b4c110fd0512280118v5e886247x8ac482bcc837159b(a)mail.gmail.com> > ATM-interfaces are correctly discovered in NAV - in "router ports report" I > can see them with almost all informations but "Vlan number". Is there ANY way > to make NAV see ATM-point-to-point connections? Yes, you can set the description field on the router interface which NAV will then interpret. Unfortunately the only doc I can find here is in Norwegian: http://metanav.ntnu.no/v2/admindok/navrunkonv.html Do we have an English version of this document? The short version is that the router description should be: link,$to_router[,$comment,$vlan] -- Kristian

1 0

weird problem
by woj＠tstd.pl 27 Des '05

27 Des '05

Hello, Today I did NAV installation using this excellent howto: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 After adding some devices I have problem with using nav start/stop script: [root@nav ~]# /usr/local/nav/bin/nav start "-":8: bad minute errors in crontab file, can't install. Starting networkDiscovery: Failed Traceback (most recent call last): File "/usr/local/nav/bin/nav", line 181, in ? main(sys.argv[1:]) File "/usr/local/nav/bin/nav", line 101, in main commandFunc(queryList) File "/usr/local/nav/bin/nav", line 136, in c_start serviceIterator(queryList, helper) File "/usr/local/nav/bin/nav", line 113, in serviceIterator func(services[service]) File "/usr/local/nav/bin/nav", line 132, in helper service.start() File "/usr/local/nav/lib/python/nav/startstop.py", line 166, in start raise e nav.startstop.CrontabError: 256 I looked at navcron files and didn't find any errors, can anybody help? Where I should look for an errors? thanks. -- Woj >From woj at tstd.pl Tue Dec 27 19:49:35 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Dec 27 19:50:00 2005 Subject: [Nav-users] weird problem In-Reply-To: <200512271921.22867.woj(a)tstd.pl> References: <200512271921.22867.woj(a)tstd.pl> Message-ID: <200512271949.35618.woj(a)tstd.pl> On Tuesday 27 December 2005 19:21, Wojciech Kozicki wrote: > Hello, > > Today I did NAV installation using this excellent howto: > http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 > > After adding some devices I have problem with using nav start/stop script: > > [root@nav ~]# /usr/local/nav/bin/nav start > "-":8: bad minute > errors in crontab file, can't install. > Starting networkDiscovery: Failed > Traceback (most recent call last): > File "/usr/local/nav/bin/nav", line 181, in ? > main(sys.argv[1:]) > File "/usr/local/nav/bin/nav", line 101, in main > commandFunc(queryList) > File "/usr/local/nav/bin/nav", line 136, in c_start > serviceIterator(queryList, helper) > File "/usr/local/nav/bin/nav", line 113, in serviceIterator > func(services[service]) > File "/usr/local/nav/bin/nav", line 132, in helper > service.start() > File "/usr/local/nav/lib/python/nav/startstop.py", line 166, in start > raise e > nav.startstop.CrontabError: 256 and one more: [root@nav /]# /usr/local/nav/bin/nav status networkDiscovery: Up NOTICE: Current crontab does not match the content of networkDiscovery ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ cricket: Up eventEngine does not seem to be running... logengine: Up backup: Up servicemon.py does not seem to be running... smsd.pl does not seem to be running... thresholdMon: Up mactrace: Up iptrace: Up safe_smsd: Up Alertengine is not running. > I looked at navcron files and didn't find any errors, can anybody help? > Where I should look for an errors? > > thanks. -- Woj

1 0

SV: [Nav-users] NAV 3.0.0 in Debian?
by woj＠tstd.pl 27 Des '05

27 Des '05

On Tuesday 27 December 2005 13:42, Peder Magne Sefland wrote: > >>> Wojciech Kozicki <woj(a)tstd.pl> 27.12.2005 12:52:39 >>> > > Maybe there > should be some live-cd with preinstalled NAV, what You think? > > > > An another suggestion is to make an nav-vmware-installation, and those > that not have Workstation/GSX/ESX can use vmware-player(freeware) > > This is good idea too... I will try to install NAV on Centos 4.2, using http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 somebody tried this? regards Woj -- ?yj tak, aby znajomym zrobi?o si? nudno, gdy umrzesz -- Julek Tuwim

1 0

NAV 3.0.0 in Debian?
by kreide＠gmail.com 27 Des '05

27 Des '05

> Maybe there > should be some live-cd with preinstalled NAV, what You think? > An another suggestion is to make an nav-vmware-installation, and those > that not have Workstation/GSX/ESX can use vmware-player(freeware) That is actually an excellent idea. It would make it super-simple to get NAV up and running on almost any x86 computer (even windows!), and installing it for real would be a simple matter of copying all the files on the VMWare partition onto a real partition. It should also not be much work to do. Does ITEA have a VMWare license? -- Kristian

1 0

NAV 3.0.0 in Debian?
by woj＠tstd.pl 27 Des '05

27 Des '05

On Tuesday 27 December 2005 12:52, Wojciech Kozicki wrote: [...] > 3. What is the _simplest_ and _fastest_ way to start using newest version > of NAV? I mean free distributions: - SuSE Linux Enterprise Server 9 - Red Hat Enterprise Linux 4 are not free to download, is there possibility to use Suse howto and install NAV on free Suse Linux? regards -- Woj >From peder.sefland at hivolda.no Tue Dec 27 13:42:06 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Tue Dec 27 13:42:47 2005 Subject: SV: [Nav-users] NAV 3.0.0 in Debian? Message-ID: <s3b144cf.025(a)HVO-3.hivolda.no> >>> Wojciech Kozicki <woj(a)tstd.pl> 27.12.2005 12:52:39 >>> Maybe there should be some live-cd with preinstalled NAV, what You think? An another suggestion is to make an nav-vmware-installation, and those that not have Workstation/GSX/ESX can use vmware-player(freeware) Peder Sefland

1 0

Collects cam data from switches
by roar.pettersen＠uib.no 20 Des '05

20 Des '05

Hello ! > Since the error is coming from within the Postgre Java driver I would > think there is some mismatch between the JDBC driver and the Postgre > server. Try to upgrade one or both (the 7.4 version is really not > recommended anymore). Would you advise me to upgrade to version 8.1 or 8.0 ? -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kreide at gmail.com Tue Dec 20 13:47:28 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Dec 20 22:47:35 2005 Subject: [Nav-users] Collects cam data from switches In-Reply-To: <Pine.GSO.4.61.0512202152310.28699(a)alf.uib.no> References: <Pine.GSO.4.61.0512201119310.15708(a)alf.uib.no> <b4c110fd0512200950l494bfce1ydf7a260e6a125ab4(a)mail.gmail.com> <Pine.GSO.4.61.0512202133580.28699(a)alf.uib.no> <b4c110fd0512201243l37dcc654x43d72fce187671b4(a)mail.gmail.com> <Pine.GSO.4.61.0512202152310.28699(a)alf.uib.no> Message-ID: <b4c110fd0512201347n114d894crc016036d580926f6(a)mail.gmail.com> > Would you advise me to upgrade to version 8.1 or 8.0 ? 8.1. -- Kristian

1 0

Collects cam data from switches
by roar.pettersen＠uib.no 20 Des '05

20 Des '05

Hello ! >> SQLException for update statement: INSERT INTO netboxinfo >> (netboxid,key,var,val) VALUES ('304','unrecognizedCDP','148','`?@') >> org.postgresql.util.PSQLException: ERROR: invalid message format >> Wounder what 'unrecognizedCDP' mean ? > > This could be a string escaping issue, but that theory should be easy > to test at least. Do you have more information for me ? Maybe what I should check or verify in my configuration ? > The 'unrecognizedCDP' is a CDP neighbour string for > which we were not able to find a matching name in netbox, and it is > then stored in netboxinfo (there it is used for correctly dealing with > HP stacks IIRC). Ok, but could this be related to the new HP Procurve 3400-cl-48G ? Btw, we doesn't have any clusters configured on our HP switches. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kreide at gmail.com Tue Dec 20 12:43:47 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Dec 20 21:43:53 2005 Subject: [Nav-users] Collects cam data from switches In-Reply-To: <Pine.GSO.4.61.0512202133580.28699(a)alf.uib.no> References: <Pine.GSO.4.61.0512201119310.15708(a)alf.uib.no> <b4c110fd0512200950l494bfce1ydf7a260e6a125ab4(a)mail.gmail.com> <Pine.GSO.4.61.0512202133580.28699(a)alf.uib.no> Message-ID: <b4c110fd0512201243l37dcc654x43d72fce187671b4(a)mail.gmail.com> > > This could be a string escaping issue, but that theory should be easy > > to test at least. > Do you have more information for me ? Actually I just tried the above INSERT and the string escaping seems to work fine, so it is probably something else. > Maybe what I should check or verify in my configuration ? Since the error is coming from within the Postgre Java driver I would think there is some mismatch between the JDBC driver and the Postgre server. Try to upgrade one or both (the 7.4 version is really not recommended anymore). > Ok, but could this be related to the new HP Procurve 3400-cl-48G ? > Btw, we doesn't have any clusters configured on our HP switches. This could be what caused it, but the real error is elsewhere. -- Kristian

1 0

Collects cam data from switches
by roar.pettersen＠uib.no 20 Des '05

20 Des '05

Hello ! I've just re-installed our NAV3 from scratch and I have a odd problem with the CAM collector cron job : org.postgresql.util.PSQLException: ERROR: invalid message format at org.postgresql.util.PSQLException.parseServerError(PSQLException.java:139) at org.postgresql.core.QueryExecutor.executeV3(QueryExecutor.java:152) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:100) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:43) at org.postgresql.jdbc1.AbstractJdbc1Statement.execute(AbstractJdbc1Statement.java:517) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:50) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeUpdate(AbstractJdbc1Statement.java:273) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeUpdate(AbstractJdbc1Statement.java:259) at no.ntnu.nav.Database.Database.update(Database.java:987) at no.ntnu.nav.Database.Database.insert(Database.java:911) at no.ntnu.nav.netboxinfo.NetboxInfo.insertVals(NetboxInfo.java:502) at no.ntnu.nav.netboxinfo.NetboxInfo.putNoError(NetboxInfo.java:359) at no.ntnu.nav.netboxinfo.NetboxInfo.putError(NetboxInfo.java:335) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:326) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:296) at QueryBoks.processCDP(QueryBoks.java:665) at QueryBoks.run(QueryBoks.java:212) SQLException for update statement: INSERT INTO netboxinfo (netboxid,key,var,val) VALUES ('304','unrecognizedCDP','148','`?@') org.postgresql.util.PSQLException: ERROR: invalid message format at org.postgresql.util.PSQLException.parseServerError(PSQLException.java:139) at org.postgresql.core.QueryExecutor.executeV3(QueryExecutor.java:152) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:100) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:43) at org.postgresql.jdbc1.AbstractJdbc1Statement.execute(AbstractJdbc1Statement.java:517) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:50) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeUpdate(AbstractJdbc1Statement.java:273) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeUpdate(AbstractJdbc1Statement.java:259) at no.ntnu.nav.Database.Database.update(Database.java:987) at no.ntnu.nav.Database.Database.insert(Database.java:911) at no.ntnu.nav.netboxinfo.NetboxInfo.insertVals(NetboxInfo.java:502) at no.ntnu.nav.netboxinfo.NetboxInfo.putNoError(NetboxInfo.java:359) at no.ntnu.nav.netboxinfo.NetboxInfo.putError(NetboxInfo.java:335) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:326) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:296) at QueryBoks.processCDP(QueryBoks.java:665) at QueryBoks.run(QueryBoks.java:212) java.lang.RuntimeException: Got SQLException, aborting put: ERROR: invalid message format at no.ntnu.nav.netboxinfo.NetboxInfo.putError(NetboxInfo.java:342) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:326) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:296) at QueryBoks.processCDP(QueryBoks.java:665) at QueryBoks.run(QueryBoks.java:212) SQLException for update statement: INSERT INTO netboxinfo (netboxid,key,var,val) VALUES ('305','unrecognizedCDP','148','`?@') I'm using postgresql-7.4.9 and pg74.216.jdbc3.jar, have also tried other .jar files without luck. Wounder what 'unrecognizedCDP' mean ? -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kreide at gmail.com Tue Dec 20 09:50:47 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Dec 20 18:50:55 2005 Subject: [Nav-users] Collects cam data from switches In-Reply-To: <Pine.GSO.4.61.0512201119310.15708(a)alf.uib.no> References: <Pine.GSO.4.61.0512201119310.15708(a)alf.uib.no> Message-ID: <b4c110fd0512200950l494bfce1ydf7a260e6a125ab4(a)mail.gmail.com> > SQLException for update statement: INSERT INTO netboxinfo > (netboxid,key,var,val) VALUES ('304','unrecognizedCDP','148','`?@') > org.postgresql.util.PSQLException: ERROR: invalid message format > Wounder what 'unrecognizedCDP' mean ? This could be a string escaping issue, but that theory should be easy to test at least. The 'unrecognizedCDP' is a CDP neighbour string for which we were not able to find a matching name in netbox, and it is then stored in netboxinfo (there it is used for correctly dealing with HP stacks IIRC). -- Kristian

1 0

missing FROM-clause entry for table netboxcategory
by morten.vold＠ntnu.no 19 Des '05

19 Des '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 19/12/2005 10:54, Perica Veljanovski uttered: > Thanks for taking the time mate! > postgresql-server-8.1.0 > postgresql-client-8.1.0 Ok, I don't know what changed from 8.0 to 8.1 - for all I know, it could be related to the default configuration installed in a FreeBSD package of PostgreSQL. I believe a quick work-around for your problem would be to edit your postgresql.conf and make sure the following line is present: add_missing_from = true - From the PostgreSQL manual: add_missing_from (boolean) When true, tables that are referenced by a query will be automatically added to the FROM clause if not already present. The default is true for compatibility with previous releases of PostgreSQL. However, this behavior is not SQL-standard, and many people dislike it because it can mask mistakes. Set to false for the SQL-standard behavior of rejecting references to tables that are not listed in FROM. I'll take a look into fixing the actual SQL query in NAV later. - -- Morten Vold, ITEA, NTNU A: Because it messes up the order in which people normally read text. Q: Why is it such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDpoZAXxIl0kpcOkQRAl6lAKChOU9kOBhBmH/LSE8XcHGnm/KzlgCgxUFU kkmV6nVlgWdPxvBBMxS17oI= =8Qdh -----END PGP SIGNATURE----- >From perica at akton.com.mk Mon Dec 19 11:38:58 2005 From: perica at akton.com.mk (Perica Veljanovski) Date: Mon Dec 19 11:39:06 2005 Subject: [Nav-users] missing FROM-clause entry for table netboxcategory In-Reply-To: <43A68640.5020506(a)ntnu.no> Message-ID: <CARMENZIhTrBoe2U8QV00000126(a)carmen.akton.si> > -----Original Message----- > From: Morten Vold [mailto:morten.vold@ntnu.no] > Sent: Monday, December 19, 2005 11:07 > To: Perica Veljanovski > Cc: nav-users(a)itea.ntnu.no > Subject: Re: [Nav-users] missing FROM-clause entry for table > netboxcategory > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 19/12/2005 10:54, Perica Veljanovski uttered: > > > Thanks for taking the time mate! > > > postgresql-server-8.1.0 > > postgresql-client-8.1.0 > > Ok, I don't know what changed from 8.0 to 8.1 - for all I know, it could > be related to the default configuration installed in a FreeBSD package > of PostgreSQL. > > I believe a quick work-around for your problem would be to edit your > postgresql.conf and make sure the following line is present: > > add_missing_from = true > > - From the PostgreSQL manual: > > add_missing_from (boolean) > > When true, tables that are referenced by a query will be > automatically added to the FROM clause if not already present. The > default is true for compatibility with previous releases of PostgreSQL. > However, this behavior is not SQL-standard, and many people dislike it > because it can mask mistakes. Set to false for the SQL-standard behavior > of rejecting references to tables that are not listed in FROM. > > > > I'll take a look into fixing the actual SQL query in NAV later. > > - -- > Morten Vold, ITEA, NTNU > > A: Because it messes up the order in which people normally read text. > Q: Why is it such a bad thing? > A: Top-posting. > Q: What is the most annoying thing on usenet and in e-mail? > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.1 (MingW32) > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org > > iD8DBQFDpoZAXxIl0kpcOkQRAl6lAKChOU9kOBhBmH/LSE8XcHGnm/KzlgCgxUFU > kkmV6nVlgWdPxvBBMxS17oI= > =8Qdh > -----END PGP SIGNATURE----- Thanks mate! You were right. add_missing_from is off by default in pgsql 8.1 This should solve a couple of my problems. I discovered a similar "missing FROM-clause entry" problem in the messages module. Anyway, you know how to look for it now ;) Thanks again. Perica Veljanovski

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users