- Nav-users - lister.unit.no

one more time...
by Borge.Brunes＠cc.uit.no 31 Okt '05

31 Okt '05

woj(a)tstd.pl said: > last time I tried to get such statistics it was problematic, because cricket > module couldn't do it automatically. Something changed? I don't know, but it have always(?) worked for us with category=GW and netsnmp 5.2.1 innstalled on the linux-host. I also use sysservices 79 in snmpd.conf, but I don't think it's necessary. regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

one more time...
by Borge.Brunes＠cc.uit.no 31 Okt '05

31 Okt '05

woj(a)tstd.pl said: > 2. Was anybody successful with monitoring linux boxes with MetaNav? No problem. regards, -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

2 1

one more time...
by morten.vold＠ntnu.no 31 Okt '05

31 Okt '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 27/10/2005 21:09, Wojciech Kozicki uttered: > 1. Is debian package up to date? I was using it before, and I would > like to try it again. I was using SID, maybe this time it will go on > stable? What is best distro to install NAV? To have no problems with > upgrades... As far as I know, the Debian package maintainer (Morten Werner) has not yet updated the Debian package to version 3.0.0. I do know that Uninett want to put more force and support behind the Debian package. Their plan is to roll out Debian based servers to Norwegian University Colleges, readily configured for services like e-mail, network monitoring and such. > 2. Was anybody successful with monitoring linux boxes with MetaNav? What do you mean, exactly? (BTW: The name is NAV - Network Administration Visualized. MetaNav is the NAV web site). - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDZdzlXxIl0kpcOkQRAgqbAKCZ5Cd4k1u2dGdIPeVINYPDMlgXhQCcCFLk Ykd24ffCVJPZdeyEbOPpZPY= =ghyr -----END PGP SIGNATURE----- >From woj at tstd.pl Mon Oct 31 10:24:57 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Mon Oct 31 10:25:13 2005 Subject: [Nav-users] one more time... In-Reply-To: <4365DCE6.7080403(a)ntnu.no> References: <200510272109.55787.woj(a)tstd.pl> <4365DCE6.7080403(a)ntnu.no> Message-ID: <200510311024.58208.woj(a)tstd.pl> On Monday 31 of October 2005 09:59, Morten Vold wrote: > On 27/10/2005 21:09, Wojciech Kozicki uttered: > > 2. Was anybody successful with monitoring linux boxes with MetaNav? > > What do you mean, exactly? I mean - gather network interfaces statistics (for example) > (BTW: The name is NAV - Network > Administration Visualized. MetaNav is the NAV web site). Ok. regards -- Woj

1 0

Beginners problem
by morten.vold＠ntnu.no 20 Okt '05

20 Okt '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 17/10/2005 20:57, Silvije uttered: > # ./nav status cricket > cricket: Up > Does nav have to be in $PATH? Only if it is convenient for you. On the other hand, I'm guessing that on a Debian installation you can use "invoke-rc.d nav" to call the nav init script. When you say there are no statistics, what do you mean exactly? Are there empty graphs on your Cricket pages, or are there no links to any graphs at all? > This is what I get: > > # python -c 'import profile' > Traceback (most recent call last): > File "<string>", line 1, in ? > ImportError: No module named profile Ok, I did a little checking, and it seems Debian packages the Python Profiler as a separate package, under the non-free section (I don't know why, but I assume it's because the profile module is released under some other license than the rest of the Python library..?) Assuming you have the non-free section as part of your sources in /etc/apt/sources.list, try running "apt-get install python-profiler" and see whether NAV works after that. Cc: to Morten Werner, who is the NAV Debian package maintainer. On a side note: I don't know why the profile module is used in the production release, but one of the original authors of the IP Device Center has promised to look into it. > This is solved, but only one router is drawn and link to another > unknown device... I have seeded into database one router and 2 > switches but switches dont appear in graph. Ok, on this matter I will have to ask Kristian to help, since he's the most knowledgeable on the Traffic Map (having authored it, and all ;) ) Kristian? - -- Morten Vold NTNU ITEA -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDVJnkXxIl0kpcOkQRAqozAJ4jS9LivAGdruuPTzvjbFOmRea86QCgtnOV YcF4CpPUqArTRd/I1W7OUWg= =na9/ -----END PGP SIGNATURE----- >From kreide at gmail.com Tue Oct 18 00:50:04 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Oct 18 08:50:10 2005 Subject: [Nav-users] Beginners problem In-Reply-To: <4353F403.4070007(a)carnet.hr> References: <4353F403.4070007(a)carnet.hr> Message-ID: <b4c110fd0510172350r67599f4crdd324d0e8fc0a397(a)mail.gmail.com> > This is solved, but only one router is drawn and link to another unknown > device... I have seeded into database one router and 2 switches but > switches dont appear in graph. Switches are not shown on the top level actually, but you can click on the router icon to navigate further down in the network (you might have to be logged in for this to work). -- Kristian

2 1

box on maintenance
by Borge.Brunes＠cc.uit.no 19 Okt '05

19 Okt '05

Is it possible to put a box on maintenance which has status down? How? regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

Group access in NAV
by morten.vold＠ntnu.no 18 Okt '05

18 Okt '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 17/10/2005 15:22, Reier Johan R?dland uttered: > web_access for > ^/(report|status|emotd|alertprofiles|machinetracker|browse|preferences|cricket)/? Don't forget: web_access for ^/(vlanPlot|navAdmin)/? > When we put a user in that group he can also change the Traffic Map > and save the new layout! Bug?? Yep. I just checked this with Kristian, and it seems to be an unfortunate oversight on our part. The Traffic Map assumes that any authenticated user is an adminstrator :( > Are there some documentation on how to build new groups with > different priveleges? What do the different Regular expressions do? It might not be very well documented, but it should be straightforward. The /web_access/ privilege is used to grant access to resources on the web server, by matching the URL requested by the browser against the regular expression in the privilege target. If the URL requested by the browser matches any of the regular expressions in the web_access privileges of the user's groups, access is granted. If not, access is denied, and the user is redirected to the NAV login page. So web_access for ^/(report|status|emotd|alertprofiles|machinetracker|browse|preferences|cricket)/? grants access to any URL beginning with a slash, followed by any of the pipe separated words, then possibly followed by another slash (I'm assuming you know your regexp here). > What are the use of "Member of the following organizations"? I don't think this is actually used by any part of NAV right now, but the idea is to use this in the future as an aid to further limit what information users have access to. The organizational tree you can select from is the one that has been entered in editdb, and the same one which is referred to by IP devices registered in the NAV database. Each IP device can belong to a given organizational unit, and so can network prefixes. So, what we hope to have ready in NAV 3.1 is a system where the administrator(s) can configure privileges which allow users to use the machine tracker to track IP addresses only within the prefixes belonging to their own organizational units, or view detailed information only about IP devices owned by their own organizational units. I also see a need to maybe map these organizational units to organizational units in an LDAP tree, so that NAV will automatically know which organizational units LDAP-authenticated users belong to. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDVKzgXxIl0kpcOkQRAsgbAKCAayEN5U1GzadG88E9jsc8Z/96XwCeNQbr 72HoGUIDZAXeYir0aHagZLA= =bDwB -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Tue Oct 18 11:09:23 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Tue Oct 18 10:09:31 2005 Subject: [Nav-users] Group access in NAV In-Reply-To: <Pine.LNX.4.63-L.0510171428050.21307(a)vekter.uio.no> References: <Pine.LNX.4.63-L.0510171428050.21307(a)vekter.uio.no> Message-ID: <4354ADB3.5080606(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 17/10/2005 15:22, Reier Johan R?dland uttered: > Are there some documentation on how to build new groups with different > priveleges? What do the different Regular expressions do? > What are the use of "Member of the following organizations"? I forgot to mention that some of the existing and future concepts surrounding the privilege system are mentioned in the tigaNAV report: http://metanav.ntnu.no/tigaNAV/tigaNAV.pdf - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDVK2zXxIl0kpcOkQRAqXKAJ9MpoJS84n7oIAtkn2VRzOZLWrAswCghz0b 6C5cefwuGRA1FDbXscnLt5o= =/zer -----END PGP SIGNATURE----- >From magnus at ntnu.no Tue Oct 18 12:29:12 2005 From: magnus at ntnu.no (Magnus Nordseth) Date: Tue Oct 18 11:28:36 2005 Subject: [Nav-users] Beginners problem In-Reply-To: <435499E5.9080807(a)ntnu.no> References: <4353F403.4070007(a)carnet.hr> <435499E5.9080807(a)ntnu.no> Message-ID: <20051018092912.GA9208(a)stud.ntnu.no> Morten Vold: > On a side note: I don't know why the profile module is used in the > production release, but one of the original authors of the IP Device > Center has promised to look into it. It is safe to just remove the line import profile This will be fixed in the next NAV release. -- Magnus Nordseth

1 0

java.sql.SQLException: ERROR
by Jan.Susegg＠hint.no 18 Okt '05

18 Okt '05

Can anyone tell me why I receive the error message: SQLException while posting alert: java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression in my eventEngine.log. The only alerts I receive is software and firmware changes and not box down or anything else. Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Alert processing done, processed 1, queue size 34 Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Box down: 158.38.xx.xx Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Added alert: e=7731 d=222 n=117 t=boxState s=x [status=down] Okt 18 08:45:53 2005 eventEngine DEV_DB-6-POSTALERT Posting alert: e=7731 d=222 n=117 t=boxState s=x [status=down] Okt 18 08:45:53 2005 eventEngine DEV_DB-6-POSTALERT SQLException while posting alert: java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression. Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-4-CALLBACK While posting netel down alert, PostAlertException: Got SQLException: ERROR: More than one tuple returned by a subselect used as an expression. Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-HANDLE Scheduling callback in 883 ms (0 s) Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Alert processing done, processed 1, queue size 34 >From kreide at gmail.com Tue Oct 18 01:16:43 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Oct 18 09:16:48 2005 Subject: [Nav-users] java.sql.SQLException: ERROR In-Reply-To: <8A65B72C71E7484FBE1862045AAC5A8FB73BC2(a)embla.ansatt.hint.no> References: <8A65B72C71E7484FBE1862045AAC5A8FB73BC2(a)embla.ansatt.hint.no> Message-ID: <b4c110fd0510180016ud40dff9l3c8fbb736c7d2662(a)mail.gmail.com> > Can anyone tell me why I receive the error message: SQLException while > posting alert: java.sql.SQLException: ERROR: More than one tuple > returned by a subselect used as an expression in my eventEngine.log. The Yes, this is most likely caused by too many entries in the alerttype table. My suggestion would be to delete all entries from that table and re-run the INSERT statements from manage.sql. -- Kristian

1 0

Beginner problem
by silvije.milisic＠carnet.hr 17 Okt '05

17 Okt '05

Hi! I am new to NAV! I have installed it from debian package. I did some database seeding and i get SNMP data from router, but: 1. I dont get any Statistics 2. When I click in Network explorer on my router icon I get Mod_python error: "PythonHandler nav.web.devBrowser.dispatcher" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 457, in import_module module = imp.load_module(mname, f, p, d) File "/usr/lib/python2.3/site-packages/nav/web/devBrowser/dispatcher.py", line 33, in ? import profile ImportError: No module named profile and 3. Traffic Map does not draw anything, I just get Java loading icon Please some hint ;) Thanx, Silvije >From Vidar.Faltinsen at uninett.no Mon Oct 10 16:25:15 2005 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Mon Oct 10 15:25:57 2005 Subject: [Nav-users] Minor bug user account Message-ID: <Pine.LNX.4.63.0510101511400.1560(a)valentin.uninett.no> Morten, In the user admin tool when you add a new user, a slightly confusing thing happens. Say I am logged in as faltin with administative privilege. Then I create the account joe, and fill in full name and password and submits. On the following page the login: is replaced with faltin, not joe... So it _looks_ as if I am altering my own user account instead of creating the new account for joe. bug? ho-ho - Vidar >From odd.hauge at hiMolde.no Mon Oct 10 17:39:50 2005 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Mon Oct 10 16:39:57 2005 Subject: [Nav-users] Alertengine Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C26A09B5(a)stam.himolde.no> Hi. I cannot start AlertEngine. Seems like some problem with the Pg library on my installation. The error message in the logfile is: Uncaught exception from user code: DBD::Pg initialisation failed: Can't locate object method "driver" via package "DBD::Pg" at /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.pm line 747. Perhaps the capitalisation of DBD 'Pg' isn't right. at /usr/lib/perl5/site_perl/5.8.6/NAV/AlertEngine/Engine.pm line 53 at /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.pm line 753 DBI::install_driver('DBI', 'Pg') called at /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.pm line 573 DBI::connect('DBI', 'dbi:Pg:dbname=navprofiles;host=\'localhost\'', 'navwrite', 'some-password', 'undef') called at /usr/lib/perl5/site_perl/5.8.6/NAV/AlertEngine/Engine.pm line 53 NAV::AlertEngine::Engine::new('NAV::AlertEngine::Engine', 'HASH(0x8d40074)') called at ./alertengine.pl line 31 Cheking if DBD:PG is installed: # perl -MCPAN -e 'install DBD::Pg' CPAN: Storable loaded ok Going to read /root/.cpan/Metadata Database was generated on Thu, 30 Jun 2005 00:00:19 GMT DBD::Pg is up to date. Any suggestion anyone ? - odd arne hauge

2 1

Vlan problems, traffic map, network explorer
by allmanj＠cp.dias.ie 13 Okt '05

13 Okt '05

Hi - i'm having two problems, which i suspect are related. I have just installed nav (debian package, version 2+3.0rc1-3) and set it up according to the docs. I have added our router and a few of our switches to the database but when i visit the traffic map, all i see is the router. Ditto for the network explorer. What exactly is required for devices to show up? I then noticed that it wasn't picking up the vlans correctly when i looked in reports. They're all set to blank. I've added one router which is a cisco 7204vxr, one cisco 2900 switch and one dell Powerconnect 5224 switch. Based on previous posts, i looked in the swport table in the manage database and can confirm that it has picked up the correct vlans from one of our switches at least. getBoksMacs.log contains lines like these: Oct 13 16:10:03 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Missing swportid for ifindex 25 on boks: cisco0 Oct 13 16:10:03 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Querying vlan: 1, MACs: 56 Mappings: 22 Blocked: 0 / 1 Oct 13 16:10:03 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Fetching vlan: 2 It has lines like that for all of our vlans. I'm more than willing to dig through logs and show you anything relevant. I really like the look of nav and want to be able to use it properly. Anything you can do to help would be greatly appreciated. Thanks, John Allman >From Vidar.Faltinsen at uninett.no Mon Oct 17 11:40:43 2005 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Mon Oct 17 10:40:49 2005 Subject: [Nav-users] machine tracker In-Reply-To: <2870BA02E1D7E14CA524C38AD06CAB7713593F(a)mailit.northwood.edu> References: <2870BA02E1D7E14CA524C38AD06CAB7713593F(a)mailit.northwood.edu> Message-ID: <Pine.LNX.4.63.0510171035540.9230(a)valentin.uninett.no> On Sun, 9 Oct 2005, Kimalat, Kipngetich wrote: > hello, > i have just installed NAV 3.0 and whats steps are there to use the machine tracker? I am not sure where you are in the post-install process; but you need to seed the NAV database, of course. More info on http://metanav.ntnu.no/moin.cgi/SeedEssentials After you have given necessary seed info on your routers and switches, gDD (getDeviceData) will start to collect information from the devices. The arp logger and cam logger will in turn collect and store arp and cam data. With this in place you can use the machine tracker to track live and historical data regarding an ip address and in turn (or directly) a mac address. Hope this answers your question. best regards - Vidar

1 0

Over 100% used ip-addresses
by peder.sefland＠hivolda.no 13 Okt '05

13 Okt '05

When i click on the link "IP address scope - graphical view", in one of my subnet 114% of the ip-addresses are used. How is that possible? Maybe I should start to use IPv6 on this subnett :-) Peder Sefland

1 0

Installation of NAV 3.0.0 on CentOS 4.1
by roger.aas＠hsh.no 12 Okt '05

12 Okt '05

I have reworked the installation description for NAV 3.0.0 on Red Hat Enterprise Linux 4 AS Update 1 (phew, long name...) to include installing on CentOS 4.1. CentOS is a free version of RHEL and can be found here: http://www.centos.org/ I have also updated some of the packages to newer versions, most notably Java from 1.4.2 to 1.5.0 (after a recommendation from Kristian Eide) and Tomcat from 5.0.28 to 5.5.12. Same link as before: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 Regards, Roger -- Roger Aas Stord/Haugesund College

1 0

pping problem
by magnus＠ntnu.no 10 Okt '05

10 Okt '05

Borge Brunes: > pping is dying with the following message: > What could be wrong? Some exception-handling seem to have been removed... Try the attached patch, you should then get a entry in your log stating which host the pinger fails on. We can continue debug from there... -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc

1 0

Alertengine
by odd.hauge＠hiMolde.no 10 Okt '05

10 Okt '05

Problem solved. Downloaded the DBD::Pg library and reinstalled it. Sorrow bothering you. Cheers Odd Arne > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Hauge Odd Arne > Sent: Monday, October 10, 2005 4:40 PM > To: nav-users(a)itea.ntnu.no > Subject: [Nav-users] Alertengine > > Hi. > > I cannot start AlertEngine. Seems like some problem with the > Pg library on my installation. The error message in the logfile is: > Uncaught exception from user code: > DBD::Pg initialisation failed: Can't locate object > method "driver" via package "DBD::Pg" at > /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.p > m line 747. > > Perhaps the capitalisation of DBD 'Pg' isn't right. at > /usr/lib/perl5/site_perl/5.8.6/NAV/AlertEngine/Engine.pm line > 53 at > /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.pm line > 753 > DBI::install_driver('DBI', 'Pg') called at > /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.p > m line 573 > DBI::connect('DBI', > 'dbi:Pg:dbname=navprofiles;host=\'localhost\'', 'navwrite', > 'some-password', 'undef') called at > /usr/lib/perl5/site_perl/5.8.6/NAV/AlertEngine/Engine.pm line 53 > NAV::AlertEngine::Engine::new('NAV::AlertEngine::Engine', > 'HASH(0x8d40074)') called at ./alertengine.pl line 31 > > > Cheking if DBD:PG is installed: > > # perl -MCPAN -e 'install DBD::Pg' > CPAN: Storable loaded ok > Going to read /root/.cpan/Metadata > Database was generated on Thu, 30 Jun 2005 00:00:19 GMT > DBD::Pg is up to date. > > > Any suggestion anyone ? > > - odd arne hauge > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

1 0

problems with eventengine
by Jan.Susegg＠hint.no 10 Okt '05

10 Okt '05

The eventEngine reports the following error message in eventEngine.log Okt 10 08:45:12 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Added alert: e=7731 d=222 n=117 t=boxState s=x [status=down] Okt 10 08:45:12 2005 eventEngine DEV_DB-6-POSTALERT Posting alert: e=7731 d=222 n=117 t=boxState s=x [status=down] Okt 10 08:45:12 2005 eventEngine DEV_DB-6-POSTALERT SQLException while posting alert: java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression. Okt 10 08:45:12 2005 eventEngine BOX_STATE_EVENTHANDLER-4-CALLBACK While posting netel down alert, PostAlertException: Got SQLException: ERROR: More than one tuple returned by a subselect used as an expression. Okt 10 08:45:12 2005 eventEngine BOX_STATE_EVENTHANDLER-6-HANDLE Scheduling callback in 120587 ms (120 s) Does anyone know how to fix this? NAV doesn't report box down, but I know that I have a box down. >From Borge.Brunes at cc.uit.no Mon Oct 10 14:08:59 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Mon Oct 10 13:10:34 2005 Subject: [Nav-users] pping problem Message-ID: <200510101108.j9AB8xES002217(a)duke.cc.uit.no> pping is dying with the following message: [2005-10-09 11:25:24] pping.py:main:172 [Notice] 330 hosts checked in 9.957 secs. 1 hosts currently marked as down. Exception in thread sender: Traceback (most recent call last): File "/usr/local/lib/python2.4/threading.py", line 442, in __bootstrap self.run() File "/usr/local/lib/python2.4/threading.py", line 422, in run self.__target(*self.__args, **self.__kwargs) File "/usr/local/nav/lib/python/nav/statemon/megaping.py", line 261, in _sendRequests mySocket.sendto(packet, (host.ip, 0)) error: (64, 'Host is down') Exception in thread getter: Traceback (most recent call last): File "/usr/local/lib/python2.4/threading.py", line 442, in __bootstrap self.run() File "/usr/local/lib/python2.4/threading.py", line 422, in run self.__target(*self.__args, **self.__kwargs) File "/usr/local/nav/lib/python/nav/statemon/megaping.py", line 186, in _getResponses rd, wt, er = select.select([self._sock], [], [], timeout) error: (4, 'Interrupted system call') What could be wrong? -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

Bug "Report - Room search"
by Borge.Brunes＠cc.uit.no 10 Okt '05

10 Okt '05

There is a bug in the report "Reports - Room search". If I do a search? on my room tf2437 I got 24 hits The same (advanced) search? based on the report "All IP Devices" gives me 42 hits ?https://nav.uit.no/report/netbox2?roomid=tf2437&op_roomid=like ?https://nav.uit.no/report/netbox?op_roomid=like&adv=1&roomid=tf2437 Fix: use "netbox" instead of "netbox2" in the report. regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

machine tracker
by kimalat＠northwood.edu 10 Okt '05

10 Okt '05

hello, i have just installed NAV 3.0 and whats steps are there to use the machine tracker? thanks kip

1 0

help with installation
by MLaTurner＠CompuNetwork.Net 07 Okt '05

07 Okt '05

Is there a "step-by-step" guide for installing Nav3 on RedHat 9.0?? I am most likely in over my head . . .

2 1

Problem with the radius-checker in servicemon
by magnus＠ntnu.no 05 Okt '05

05 Okt '05

Borge Brunes: > I try to start monitoring a radius-service using servicemon in NAV. > Added the service to a server and all looks fine in the > "Service availability": > Handler radius > Status Up > > But the servicemon.log says: > db.py:getCheckers:226 [Critical] no such checker: radius > > > Why is the "Service availability" wrong and what's wrong > with the radius-checher? I think this means (it's been a while since I looked at the code) that the servicemonitor was unable to load the radius-checker module. The most appearant reason would be that the radius-checker depends on some python radius module. The actual radius-checker is located in the lib/python/nav/statemon/checker directory. I think you can figure out the dependencies from that. Also, there is a utility called serviceChecker.py or something similar that can assist you in debugging what this checkers actually do. If you look at the service availability, it probably don't contain any data, which means it hasn't been able to measure anything. The service status should have been 'Unknown', but I don't think our data model supports i at the time. HTH, -- Magnus Nordseth

1 0

Web page of NAV 3.0.0 still says beta
by roger.aas＠hsh.no 05 Okt '05

05 Okt '05

A "cosmetic" error on the web-page of NAV 3.0.0, it still says "Welcome to NAV v3.0 _beta_!". Something to fix for 3.0.1? :-) Regards, Roger --- Roger Aas Stord/Haugesund College >From Vidar.Faltinsen at uninett.no Mon Sep 19 02:44:07 2005 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Mon Sep 19 01:44:12 2005 Subject: [Nav-users] Release-notice: NAV 3.0.0 :-)) In-Reply-To: <432AD483.40701(a)ntnu.no> References: <432AD483.40701(a)ntnu.no> Message-ID: <Pine.LNX.4.63.0509190141110.5381(a)valentin.uninett.no> > NAV 3.0.0 is now finally available for download at > http://metanav.ntnu.no/ :-) Thanks, Morten. Very good work. - Vidar

2 1

SV: [Nav-users] Alertengine email sender machine name != real
by roger.aas＠hsh.no 05 Okt '05

05 Okt '05

The DNS data is correct for both servers so that is not the problem here. - Roger Peder Magne Sefland wrote: > Maybe some information is collected from dns and the other is from > machine name? > > Are they the same? > > Peder > > >>>>Roger Aas <roger.aas(a)hsh.no> 29.09.2005 11:20:53 >>> > > I get this email from Alertengine: > > > X-Auth-No: > > Return-Path: <navcron(a)nav3.hsh.no> > > Received: from sentinel.hsh.no not authenticated [158.37.208.20] > > by posthus.hsh.no with NetMail SMTP Agent $Revision: 3.22.1.16 > $ on Novell NetWare; > > Thu, 29 Sep 2005 10:41:26 +0200 > > Received: from artifact.hsh.no ([158.37.35.10]) > > by sentinel.hsh.no (SMSSMTP 4.1.7.33) with SMTP id > M2005092910483300240 > > for <roger(a)posthus.hsh.no>; Thu, 29 Sep 2005 10:48:33 +0200 > > Received: from sentinel.hsh.no (sentinel.hsh.no [158.37.208.20]) > > by artifact.hsh.no (8.9.3 (PHNE_28760)/8.9.3) with SMTP id > KAA07954 > > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:33 +0200 > (METDST) > > Received: from nav3.hsh.no ([158.37.208.25]) > > by sentinel.hsh.no (SMSSMTP 4.1.7.33) with SMTP id > M2005092910483200238 > > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:32 +0200 > > Received: from nav3.hsh.no (nav3.hsh.no [127.0.0.1]) > > by nav3.hsh.no (8.13.1/8.13.1) with ESMTP id j8T8mWdi008206 > > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:32 +0200 > > Received: (from navcron@localhost) > > by nav3.hsh.no (8.13.1/8.13.1/Submit) id j8T8mWdW008203; > > Thu, 29 Sep 2005 10:48:32 +0200 > > Date: Thu, 29 Sep 2005 10:48:32 +0200 > > Message-Id: <200509290848.j8T8mWdW008203(a)nav3.hsh.no> > > From: alertengine(a)nav.hsh.no > > To: roger.aas(a)hsh.no > > Subject: Box haugesund-auditoriume-ap.hsh.no is up > > > > This is an automatically generated message from NAV: > > > > Box haugesund-auditoriume-ap.hsh.no (158.37.35.132) is up since > 2005-09-29 10:48:09. > > As you can see it is only the "From:" header line that says > "nav.hsh.no", the rest of > the headers give the correct name for the server "nav3.hsh.no". Anyone > know where this > is happening? Some config I have missed? Or a small bug lurking > somewhere? Or is it just > a cosmetic thing since you are not supposed to answer such an email? > Since I have called > the NAV 2.1.5 server for nav.hsh.no it gave me a small moment of > confusion... :-) > > - Roger >

1 1

Urgent: SMS sending problem
by roger.aas＠hsh.no 05 Okt '05

05 Okt '05

I was planning to get NAV 3 into service soon. So the next thing I needed to test is that NAV sends SMS'es to the person that is on duty. But I do not get this to work. Everytime I start NAV I get an email like this: > From: navcron(a)nav3.hsh.no > To: roger(a)hsh.no > Subject: smsd database connection problem > > > Status: 03.10.2005 10:29:13 PG_conn=SCALAR(0x826d464) 1 Reset > > Error was: > server closed the connection unexpectedly > This probably means the server terminated abnormally > before or while processing the request. The gammu program by itself works. I can do a command like this: echo Test | gammu nothing --sendsms TEXT 91799053 and I receive an SMS. If I use the test functionality of smsd.pl like this: /usr/local/nav/bin/smsd.pl -t 91799053 I do _not_ get an SMS and it prints just a "0" on the console. Can someone please help me with this. This is the function I need working to start using NAV 3. Best regards, Roger -- Roger Aas Stord/Haugesund College

1 1

Error in report tool "Trunked core switch ports"
by odd.hauge＠hiMolde.no 05 Okt '05

05 Okt '05

I'm having the same error messages as you Roger. I guess this can have something to do with the version of postgres we are using. I have installed Fedora Core 4 which comes with ver. 8.0.3 of postgres. I guess RHEL4 comes with ver 8 to. And I believe boolean expressions are handled in a different way in version 8 of postgres than in ver. 7. But I'm not a database expert. But if you edit /usr/local/nav/etc/report/front.html and replaces trunk=1 with trunk=t in line 80 the report works. The other "error" you reported earlier can be avoid by editing /usr/local/nav/etc/report/report.conf. Change line 290 from: GROUP BY roomid,sysname,host(ip),catid,orgid,val,netbox.netboxid,prefixid"; to GROUP BY roomid,sysname,host(ip),catid,orgid,val,netbox.netboxid,netbox.ip,prefix id"; Nice if someone of the devolpers can comment this. Cheers Odd Arne Hauge Molde University College > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Roger Aas > Sent: Monday, October 03, 2005 1:34 PM > To: nav-users(a)itea.ntnu.no > Subject: [Nav-users] Error in report tool "Trunked core switch ports" > > Nav version 3.0.0 > > "Toolbox -> Report -> Core Switches/Trunked core switch > ports" gives me this error: > > Configuration error! The report generator is not able to do > such things. > ERROR: operator does not exist: boolean = integer > HINT: No operator matches the given name and argument type(s). > You may need to add explicit type casts. > SELECT > b1.sysname,s1.interface,m1.module,s1.port,s1.link,s1.speed,s1. > duplex,s1.media,s1.trunk,vlan.vlan,s1.portname,b2.sysname > AS to_netboxid,m2.module AS > remote_module,s1.swportid,b1.netboxid AS netboxid,b1.catid > FROM swport AS s1 JOIN module AS m1 USING (moduleid) JOIN > netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON > (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON > (s1.swportid=swportvlan.swportid AND (trunk=false OR trunk IS > NULL)) LEFT JOIN vlan using(vlanid) LEFT JOIN swport AS s2 ON > (s1.to_swportid=s2.swportid) LEFT JOIN module AS m2 ON > (s2.moduleid=m2.moduleid) WHERE s1.trunk = 1 AND b1.catid = 'SW' > ORDER BY b1.sysname,module,port LIMIT 100 OFFSET 0 > > I sent earlier an email about another error I got on another > report tool, when sorting on IP-address on servers. I have > not received any hints to what could be the problem there. > > httpd 2.0.52 > jakarta-tomcat 5.0.28 > java j2sdk1.4.2_08 > perl 5.8.5 > php 4.3.9 > postgresql 7.4.8 > python 2.3.4, mod_python 3.1.3 > > Regards, > Roger > > -- > Roger Aas > Stord/Haugesund College > > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

3 2

Error in report tool "Trunked core switch ports"
by roger.aas＠hsh.no 03 Okt '05

03 Okt '05

Nav version 3.0.0 "Toolbox -> Report -> Core Switches/Trunked core switch ports" gives me this error: Configuration error! The report generator is not able to do such things. ERROR: operator does not exist: boolean = integer HINT: No operator matches the given name and argument type(s). You may need to add explicit type casts. SELECT b1.sysname,s1.interface,m1.module,s1.port,s1.link,s1.speed,s1.duplex,s1.media,s1.trunk,vlan.vlan,s1.portname,b2.sysname AS to_netboxid,m2.module AS remote_module,s1.swportid,b1.netboxid AS netboxid,b1.catid FROM swport AS s1 JOIN module AS m1 USING (moduleid) JOIN netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON (s1.swportid=swportvlan.swportid AND (trunk=false OR trunk IS NULL)) LEFT JOIN vlan using(vlanid) LEFT JOIN swport AS s2 ON (s1.to_swportid=s2.swportid) LEFT JOIN module AS m2 ON (s2.moduleid=m2.moduleid) WHERE s1.trunk = 1 AND b1.catid = 'SW' ORDER BY b1.sysname,module,port LIMIT 100 OFFSET 0 I sent earlier an email about another error I got on another report tool, when sorting on IP-address on servers. I have not received any hints to what could be the problem there. httpd 2.0.52 jakarta-tomcat 5.0.28 java j2sdk1.4.2_08 perl 5.8.5 php 4.3.9 postgresql 7.4.8 python 2.3.4, mod_python 3.1.3 Regards, Roger -- Roger Aas Stord/Haugesund College

1 0

[Nav-users] Alertengine email sender machine name != real machine name
by roger.aas＠hsh.no 29 Sep '05

29 Sep '05

I get this email from Alertengine: > X-Auth-No: > Return-Path: <navcron(a)nav3.hsh.no> > Received: from sentinel.hsh.no not authenticated [158.37.208.20] > by posthus.hsh.no with NetMail SMTP Agent $Revision: 3.22.1.16 $ on Novell NetWare; > Thu, 29 Sep 2005 10:41:26 +0200 > Received: from artifact.hsh.no ([158.37.35.10]) > by sentinel.hsh.no (SMSSMTP 4.1.7.33) with SMTP id M2005092910483300240 > for <roger(a)posthus.hsh.no>; Thu, 29 Sep 2005 10:48:33 +0200 > Received: from sentinel.hsh.no (sentinel.hsh.no [158.37.208.20]) > by artifact.hsh.no (8.9.3 (PHNE_28760)/8.9.3) with SMTP id KAA07954 > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:33 +0200 (METDST) > Received: from nav3.hsh.no ([158.37.208.25]) > by sentinel.hsh.no (SMSSMTP 4.1.7.33) with SMTP id M2005092910483200238 > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:32 +0200 > Received: from nav3.hsh.no (nav3.hsh.no [127.0.0.1]) > by nav3.hsh.no (8.13.1/8.13.1) with ESMTP id j8T8mWdi008206 > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:32 +0200 > Received: (from navcron@localhost) > by nav3.hsh.no (8.13.1/8.13.1/Submit) id j8T8mWdW008203; > Thu, 29 Sep 2005 10:48:32 +0200 > Date: Thu, 29 Sep 2005 10:48:32 +0200 > Message-Id: <200509290848.j8T8mWdW008203(a)nav3.hsh.no> > From: alertengine(a)nav.hsh.no > To: roger.aas(a)hsh.no > Subject: Box haugesund-auditoriume-ap.hsh.no is up > > This is an automatically generated message from NAV: > > Box haugesund-auditoriume-ap.hsh.no (158.37.35.132) is up since 2005-09-29 10:48:09. As you can see it is only the "From:" header line that says "nav.hsh.no", the rest of the headers give the correct name for the server "nav3.hsh.no". Anyone know where this is happening? Some config I have missed? Or a small bug lurking somewhere? Or is it just a cosmetic thing since you are not supposed to answer such an email? Since I have called the NAV 2.1.5 server for nav.hsh.no it gave me a small moment of confusion... :-) - Roger -- Roger Aas Stord/Haugesund College

1 0

Error in report tool sorting on server ip
by roger.aas＠hsh.no 28 Sep '05

28 Sep '05

Nav version 3.0.0 "Toolbox -> Report -> Servers -> (Sort on) IP" gives me this error: Servers Configuration error! The report generator is not able to do such things. ERROR: column "netbox.ip" must appear in the GROUP BY clause or be used in an aggregate function SELECT roomid,sysname,host(ip),catid,orgid,count(distinct category) as subcats,count(serviceid) as services,val as function,netbox.netboxid,prefixid FROM netbox LEFT JOIN service USING (netboxid) LEFT JOIN netboxcategory USING (netboxid) LEFT JOIN netboxinfo ON (netboxinfo.netboxid=netbox.netboxid AND netboxinfo.var='function') WHERE catid='SRV' GROUP BY roomid,sysname,host(ip),catid,orgid,val,netbox.netboxid,prefixid ORDER BY ip,roomid LIMIT 100 OFFSET 0 This does not happen with the other categories like routers, core switches and wireless that I have in NAV now. - Roger -- Roger Aas Stord/Haugesund College

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users