Nav-users

nav-users@lister.sikt.no

3 participants
1372 discussions

GPON port didn't shows up
by Agung Reza Satria 11 Mar '20

11 Mar '20

Dear Uninett, Thank you for build NAV, it is a good tools to have. But I have a missing things. I have several devices that monitor by NAV and something weird happen that NAV cannot shows up GPON Port. It only show ethernet ports and vlans. Here is my comparation with other NMS (cacti). And here is what shows on NAV Is there missing things in my installation or my configuration? Agungreza NCSIRT DIVISION PT MORA TELEMATIKA INDONESIA Grha 9, Jalan Panataran No.9 Proklamasi Jakarta Pusat 10320, Indonesia Office : +62-21 31998600 | Fax : +62-21 3142882 | Email: <mailto:ncsirt@moratelindo.co.id> ncsirt(a)moratelindo.co.id ============================================================================================== CONFIDENTIALITY NOTE: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not review, disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and destroy all copies of this information from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late, incomplete or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. PT. Mora Telematika Indonesia, Grha 9, Jl. Penataran No 9, Jakarta 10320, Indonesia, www.moratelindo.co.id ============================================================================================== SAVE PAPER - Please do not print this e-mail unless necessary

2 8

SNMP V3
by Jon Irish 26 Feb '20

26 Feb '20

Hello,Does anyone know when SNMP v3 support will be added to NAV?Thanks Jon WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. IrishTech accepts no liability for any damage caused by any virus transmitted by this email. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission.

2 2

Need to add devices manually?
by Michael Schwartzkopff 24 Feb '20

24 Feb '20

Hi, I am trying nav for the first time. I have a seed device. A LLDP neighbor us detected as "unrecognized neighbor". nav can access the device with SNMP. nav does not add this device automatically. Do I have to add the new device manually? Why does nav not add it automatically? Mit freundlichen Grüßen, -- [*] sys4 AG https://sys4.de, +49 (89) 30 90 46 64 Schleißheimer Straße 26/MG,80333 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief Aufsichtsratsvorsitzender: Florian Kirstein

2 1

L2 Link delete from Netmap
by Marzec, Sebastian 12 Feb '20

12 Feb '20

Hello Nav Users have a question. Netmap with L2 Switches. I have changed topology, but old links are still there on the map. How to remove from map old connections (grayed out) [cid:image001.png@01D5E0CF.BBD79EA0] Best Regards Sebastian Marzec

2 2

Trunk links with LACP
by jaumeramos＠iesebre.com 07 Feb '20

07 Feb '20

Hi. First post here, hope it's the right place to ask questions. I'm trying NAV to document my network, it's a state college due to professional trainin with 600+ computers. My network equipment are mostly d- link switches, with mikrotik routers and some Cisco stuff. After enabling SNMP and LLDP i got an approximate map of the network, but the trunk connections using LACP protocol does not show in the map. Is there some additional configuration needed to make NAV detect them. Thanks for such a great piece of software.

2 1

Announcement: NAV 5.0.4 released
by Morten Brekkevold 16 Jan '20

16 Jan '20

The fourth maintenance release of the 5.0 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 9/10 (Stretch/Buster) are available in our APT repository [2] as usual. Please also be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance will be updated shortly. Deprecation warning =================== Python 2 reached its end-of-life on **January 1, 2020**. NAV 5.0 therefore moves to Python 3, and as such, you will need at least Python 3.5 to run NAV. Most of NAV will still run on Python 2 as of the 5.0 release, but from this point, Python 2 will be deprecated and we will start removing code that exists solely to keep compatibility with Python 2. Changes ======= Fixed GitHub issues in this release: * #2074 ([BUG] ipdevpoll inventory job crashes for many devices with an AttributeError) * #2075 ([BUG] Editing existing API tokens shows no enabled endpoints) * #2076 ([BUG] Missing Javascript multiselect library used by Useradmin API token form) * #2077 ([BUG] string handling in snmptrapd is broken on Python 3) * #2081 ([BUG] Bulk importing netboxes without a managment profile raises an exception) * #2083 ([BUG] TypeError is raised when creating a csv for download from a room-search) * #2085 ([BUG] TypeError is raised when getting navlet) * #2087 ([BUG] Reports with many pages crash once page 4 is visited) * #2090 ([BUG] Marking machine as disabled in arnold raises TypeError) * #2092 ([BUG] ipdevinfo sensor tab produces too large Graphite request) * #2093 ([BUG] PortAdmin crashes when viewing a switch with non-ASCII port descriptions) * #2097 ([BUG] Adding a manual detention without a number of days until autoenable crashes Arnold) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/latest/release-notes.html#nav-5.0 -- Sincerely, Morten Brekkevold Uninett

1 0

Announcement: NAV 5.0.3 released
by Morten Brekkevold 19 Des '19

19 Des '19

The third maintenance release of the 5.0 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 9/10 (Stretch/Buster) are available in our APT repository [2] as usual. Please also be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance will be updated shortly. Deprecation warning =================== Python 2 reaches its end-of-life on **January 1, 2020**. NAV 5.0 therefore moves to Python 3, and as such, you will need at least Python 3.5 to run NAV. Most of NAV will still run on Python 2 as of the 5.0 release, but from this point, Python 2 will be deprecated and we will start removing code that exists solely to keep compatibility with Python 2. Changes ======= Fixed GitHub issues in this release: * #2015 (Broken Mikrotik LLDP-MIB implementation causes ipdevpoll LLDP plugin to crash) * #2055 ([BUG] Navlets crash/appear blank if their config is stored as legacy pickles) * #2057 (Make servicemon run on Python 3) * #2058 ([BUG] navpgdump crashes with TypeError on Python 3 if exclusion options are provided) * #2059 ([BUG] Coriant Groove sensors names appear as reprs of bytes objects under Python 3) * #2060 ([BUG] smsd gammudispatcher error handling fails on Python 3) * #2061 ([BUG] silent_include tag template crashes any view that uses it) * #2062 ([BUG] ipdevpoll considers the same devices changed on every reload loop, causing massive scheduling problems) * #2063 (Massively reduce the number of queries produced by the API /alert endpoint) * #2065 ([BUG] some servicemon checker runs crash with a UnboundLocalError) * #2066 (Increase the max number of shown alerts in Status page to 1000 and provide feedback spinner when loading data) * #2067 ([BUG] Alertengine Slack dispatcher fails with TypeError) * #2068 ([BUG] Workaround for faulty Aruba ENTITY-MIB::entLogicalTable implementation crashes with TypeError on Python 3) * #2069 ([BUG] ipdevpoll inventory job crashes with a Django ValidationError) * #2070 ([BUG] Servicemon SMTP checker fails with " a bytes-like object is required, not 'str'") * #2071 ([BUG] Active maintenance task list crashes when tasks contain deleted IP devices) * #2072 ([BUG] Servicemon RadiusChecker always fails with "secret must be a binary string" message) * #2073 ([BUG] Room image upload crashes with a TypeError) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/latest/release-notes.html#nav-5.0 -- Sincerely, Morten Brekkevold Uninett

1 0

Announcement: NAV 5.0.2 released
by Morten Brekkevold 13 Des '19

13 Des '19

The second maintenance release of the 5.0 series of NAV is now out, and what a busy week it has been! The source code is available for download at GitHub [1]. New packages for Debian 9/10 (Stretch/Buster) are available in our APT repository [2] as usual. Please also be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance will be updated shortly. Deprecation warning =================== Python 2 reaches its end-of-life on **January 1, 2020**. NAV 5.0 therefore moves to Python 3, and as such, you will need at least Python 3.5 to run NAV. Most of NAV will still run on Python 2 as of the 5.0 release, but from this point, Python 2 will be deprecated and we will start removing code that exists solely to keep compatibility with Python 2. Changes ======= Fixed GitHub issues in this release: * #2035 (Enable room geo positions to be writeable in API) * #2036 ([BUG] logengine crash with AttributeError on every run on NAV 5.0.1) * #2037 ([BUG] ipdevpolld multiprocess mode logs reams of TypeErrors) * #2038 ([BUG] ipdevpoll psuwatch crash with TypeError immediately after upgrade to NAV 5) * #2039 (Fix broken natural sort implementation on Python 3 ) * #2041 (Geomap does not work in NAV 5.0.1) * #2043 ([BUG] Syslog analyzer search returns nothing) * #2044 ([BUG] navclean does not work under Python 3) * #2045 ([BUG] Exception is raised when visiting /api/1/alert/ID) * #2047 ([BUG] ipdevpoll jobs crash with "A string literal cannot contain NUL (0x00) characters" messages for some devices) * #2048 (Support MAC address device IDs from CDP records) * #2049 ([BUG] ipdevinfo old style Switch port activity view is blank) * #2050 ([BUG] Geomap is missing links between nodes) * #2052 ([BUG] ipdevpoll inventory job sometimes crashes when saving POE Port information) * #2054 ([BUG] pping resolves all boxDown alerts on restart) * #2055 ([BUG] Navlets crash/appear blank if their config is stored as legacy pickles) * #2056 ([BUG] Cannot add activity graphs to dashboard) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/latest/release-notes.html#nav-5.0 -- Sincerely, Morten Brekkevold Uninett

1 0

Portadmin - SNMP Error
by Ingeborg Hellemo 11 Des '19

11 Des '19

NAV 4.8.6 We have a couple of switches, Cisco Catalyst 4510R+E where we are not able to change Vlan via PortAdmin: Error setting vlan: SNMP Error: wrongType (The set datatype does not match the data type the agent expects) We have several other switches of the same type where there are no errors. The config on the switches is as good as identical. Can anyone point us in the right direction for debugging this? --Ingeborg -- Ingeborg Østrem Hellemo -- ingeborg.hellemo(a)uit.no Dep. of Information Technology --- Univ. of Tromsø

1 0

Announcement: NAV 5.0.1 released
by Morten Brekkevold 05 Des '19

05 Des '19

The first maintenance release of the 5.0 series of NAV is now out! The source code is available for download at GitHub [1]. New packages for Debian 9/10 (Stretch/Buster) are available in our APT repository [2] as usual. Please also be extra aware of config file changes. Look out for `*.dpkg-dist` files in /etc/nav and make sure to update your running config. The virtual appliance will be updated shortly. Deprecation warning =================== Python 2 reaches its end-of-life on **January 1, 2020**. NAV 5.0 therefore moves to Python 3, and as such, you will need at least Python 3.5 to run NAV. Most of NAV will still run on Python 2 as of the 5.0 release, but from this point, Python 2 will be deprecated and we will start removing code that exists solely to keep compatibility with Python 2. Changes ======= Fixed GitHub issues in this release: * #2016 (ipdevpoll inventory job crashes when processing manufacturing dates from ENTITY-MIB under Python 3) * #2019 (IP Device info "Neighbor" tab is blank) * #2023 (Netmap layer 3 crashing) * #2025 (SeedDB bulk import file upload crashes) * #2030 (Ensure internal snmp agent check state stays in sync with global snmpAgentState) * #2031 (Fix PortAdmin crash on invalid IP search) * #2032 (Replace SNMP community columns in SeedDB netbox listing with management profile lists) * #2033 (Don't crash when logging in users with old-style password hashes) Please see the release notes [3] for more details. Happy NAVing everyone! Links ===== [1] https://github.com/UNINETT/nav/releases [2] https://nav.uninett.no/install-instructions/#debian [3] https://nav.uninett.no/doc/latest/release-notes.html#nav-5.0 -- Sincerely, Morten Brekkevold Uninett

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users