Nav-users

nav-users@lister.sikt.no

1372 discussions

Need to make a sms-Alert when a mac-address enter the network
by vidar.faltinsen＠uninett.no 06 Feb '07

06 Feb '07

On Mon, 5 Feb 2007, Dan Oetting wrote: > On Jan 19, 2007, at 5:02 AM, Peder Magne Sefland wrote: > > >We use DHCP and I would like to get an sms-message when this > >mac-address enter the network. Can this be done today? > > On a small scale such as having only 1 MAC address that you need to catch, you > could configure your DHCP servers to assign this MAC a specific IP. > > With the suspect confined to a known set of IP addresses you could also setup > a sniffer on the external routes to capture all traffic from those IPs to see > for yourself if there is abuse. > > I am surprised that switches can't generate an SNMP trap whenever a new MAC > address is added to it's routing tables. You probably mean bridge table, anyway, are you sure? For Cisco I've read that you can do this: "You can generate SNMP traps whenever a MAC address change occurs by enabling the set snmp trap enable macnotification command in conjunction with enabling the set cam notification and set cam notification historysize commands." I haven't tested it yet, maybe someone out there has? We have SNMP trap on TODO for NAV 3.3, we are thinking of an implementation that can trigger certain scripts on a given snmp trap oid. We see to very interesting use cases: * when linkdown/up trap is detected update the cooresponding link value in the swport/gwport database table. * when a new mac address is seen/gone trigger a script that opens/closes corresponding machine tracker records (cam table). This script could also post alarms regarding wanted mac addresses. - Vidar

1 0

cricket error in logs
by morten.brekkevold＠uninett.no 02 Feb '07

02 Feb '07

Mr. Caryl Whitlatch wrote, On 19-01-2007 16:11: > Config tree needs to be recompiled: File > /usr/local/nav/cricket/cricket-config/switches/Defaults is newer than the > compiled version This warning appears if the cricket-configuration has been changed without cricket-compile having been run. Normally, cricket-compile is run if necessary at the start of each collection run - which is at least every 5 minutes. You might be seeing this error because of file permission problems. Makecricketconfig.pl prior to NAV 3.2 used to unnecessarily set restrictive umasks before creating new Cricket configuration files. Please make sure that every file and directory below /usr/local/nav/cricket/cricket-config/ is writable by the navcron user, and readable by everyone (or the user who runs the Apache process - the point being that Cricket's web interface must be able to read the config). I also recommend upgrading to NAV 3.2, of course :) -- mvh Morten Brekkevold UNINETT >From morten.brekkevold at uninett.no Fri Feb 2 14:36:11 2007 From: morten.brekkevold at uninett.no (Morten Brekkevold) Date: Fri Feb 2 14:36:30 2007 Subject: [Nav-users] cricket 2 In-Reply-To: <004201c73bdc$4ca5b2c0$4732a8c0@cwhitlatch> References: <004201c73bdc$4ca5b2c0$4732a8c0@cwhitlatch> Message-ID: <45C33E4B.4030103(a)uninett.no> Mr. Caryl Whitlatch wrote, On 19-01-2007 16:12: > Anything I should be concerned with here? [output from makecricketconfig snipped] No, everything looks normal (except for the fact that makecricketconfig in NAV 3.1.1 has known bugs). -- mvh Morten Brekkevold UNINETT >From morten.brekkevold at uninett.no Fri Feb 2 14:38:17 2007 From: morten.brekkevold at uninett.no (Morten Brekkevold) Date: Fri Feb 2 14:38:30 2007 Subject: [Nav-users] Announcement: NAV 3.2.0 released In-Reply-To: <1170419636.12236.1.camel@myh> References: <45C32599.4070207(a)uninett.no> <1170419636.12236.1.camel@myh> Message-ID: <45C33EC9.3030606(a)uninett.no> Stein Magnus Jodal wrote, On 02-02-2007 13:33: > Err. Morten meant 3.2.0. He blames the day of the week ;-) That, and lack of strong coffee :P > "When in doubt, read the subject!" -Morten Yes, truth is in the headers. -- mvh Morten Brekkevold UNINETT >From oetting at usgs.gov Mon Feb 5 11:28:28 2007 From: oetting at usgs.gov (Dan Oetting) Date: Mon Feb 5 19:28:35 2007 Subject: [Nav-users] Need to make a sms-Alert when a mac-address enter the network In-Reply-To: <45B0C184.3657.00CE.0(a)hivolda.no> References: <45B0C184.3657.00CE.0(a)hivolda.no> Message-ID: <78035348-7938-499C-9093-9E9F2D9E73DF(a)usgs.gov> On Jan 19, 2007, at 5:02 AM, Peder Magne Sefland wrote: > We use DHCP and I would like to get an sms-message when this > mac-address enter the network. Can this be done today? On a small scale such as having only 1 MAC address that you need to catch, you could configure your DHCP servers to assign this MAC a specific IP. With the suspect confined to a known set of IP addresses you could also setup a sniffer on the external routes to capture all traffic from those IPs to see for yourself if there is abuse. I am surprised that switches can't generate an SNMP trap whenever a new MAC address is added to it's routing tables. -- Dan O.

1 0

Announcement: NAV 3.2.0 released
by morten.brekkevold＠uninett.no 02 Feb '07

02 Feb '07

NAV 3.1.0 is now available for download at SourceForge, see http://sourceforge.net/projects/nav :-) This is mainly a feature release, but it also contains a number of bugfixes. There is still a number of known bugs that we are working on. If you discover bugs, please report them on this list or at http://sourceforge.net/projects/nav . Binary packages for Debian will be available soon. The Debian package is maintained by Morten Werner Olsen, on commission from UNINETT. Alex Krapivins updated CentOS RPMs are also available for download at SourceForge. -- mvh Morten Vold UNINETT

1 0

Get error when adding IP device "Gw router - layer 3 device"
by morten.brekkevold＠uninett.no 03 Jan '07

03 Jan '07

Tor Pretorius wrote, On 11-12-2006 15:45: > I have add many Switch and GSW device > but get error when I adding GW device > > Any idea ?? Yes. > (NAV 3.1.1 run on Centos 4.4) [...] > File "/usr/local/nav/apache/webroot/editdb/initBox.py", line 161, in > is_ascii > s.encode("ascii") > > AttributeError: 'int' object has no attribute 'encode' It appears that our bugfix for problems with hexstring serial numbers on some Cisco devices introduced a new, similar bug. Some devices also return integer values for serial numbers instead of strings - attempting to encode an integer object as if it were a string will fail miserably, as in your case. I've just committed a fix for this to the repository (r3785). We're expecting to release NAV 3.2 within a few weeks, so I don't think you will see this in a bugfix release before that. Several others have reported this problem, and a workaround has been suggested: Use bulk import to insert the devices that cause this error - the serial numbers are not retrieved and checked in this manner during a bulk import. -- mvh Morten Brekkevold UNINETT >From barbieri.marco at unimore.it Mon Jan 8 12:06:48 2007 From: barbieri.marco at unimore.it (Marco Barbieri) Date: Mon Jan 8 12:07:05 2007 Subject: [Nav-users] Problem with HP 9304m & vlan Message-ID: <200701081206.48961.barbieri.marco(a)unimore.it> Hi all, i'm trying to use NAV 3.1.1 in my environment, my main problem seems to be that my network in mainly based on HP router/switches: 9304m (foundry/hp), procurve 5304, 5308, 2824 etc.. and a couple of cisco. I don't have cdp active on any machine, the net is ospf based and snmp enabled. The Cisco machines are fully understood, i can see the vlans that are there defined, counters and so on, everything is fine. Some HP machines are understood too or a sort of mainly Procurve family 25xx e 53xx even if i can't see the vlans that are defined on those router/switches. Hp/Foundry 9304m is the worst understood: non only it doesn't show any defined vlan but it doesn't show the expansions slots that are fitted in the chassis. Obviously these are my main router/switches. :) I've tried to see if there where a problem related to OIDs for this machine, but the one that NAV proposes when i add the machine is the same i get executing the snmpwalk query that's in the Online Help. I would like to know what i can do now, what infos you may need to understand what's foing on and if there's something i can test/post etc. Hope to here from you soon. Marco Barbieri. P.S.: btw, it looks like a great tool ;-) -- Marco Barbieri - CeSIA - 059-2055218 >From peter.ejmont at Dartmouth.EDU Thu Jan 18 10:52:10 2007 From: peter.ejmont at Dartmouth.EDU (Peter Ejmont) Date: Thu Jan 18 16:53:17 2007 Subject: [Nav-users] problems logging into web interface Message-ID: <6C6D7546-0D88-4EAE-AC10-58A766E0A3A8(a)Dartmouth.EDU> Hi All, I just installed Nav v3 beta on a Freebsd 6.2 from ports. Installation went without any major problems and after playing with apache config I was able to see the index page. however, after clicking on Login, I got the following: <body onLoad="document.getElementById('username').focus();"> <table height=40% border=0 width=100%><tr valign=middle><td valign=middle align=center> <br><br><br> <font face=verdana size=1> <form method="POST" action="/index/login"> <img src="/images/login/navlogo.gif"><br> <br><input id="username" type="text" name="login" style="border: 1px solid #99c;"><br><font color=#6699CC>username</font> <br><input type="password" name="password" style="border: 1px solid #99c;"><br><font color=#6699CC>password</font> <input type="hidden" name="origin" value=""> <br><br><input type="submit" value="Log in"> </form> </font> </td></tr></table> </body> The url changed from /index/index to /index/login How do I fix it? Nav is the only website on that machine so DocumentRoot is set to "/ usr/local/nav/apache/webroot/" Thanks, Peter >From roar.pettersen at uib.no Thu Jan 18 22:24:26 2007 From: roar.pettersen at uib.no (Roar Pettersen) Date: Thu Jan 18 22:25:15 2007 Subject: [Nav-users] problems logging into web interface In-Reply-To: <6C6D7546-0D88-4EAE-AC10-58A766E0A3A8(a)Dartmouth.EDU> References: <6C6D7546-0D88-4EAE-AC10-58A766E0A3A8(a)Dartmouth.EDU> Message-ID: <Pine.SOC.4.64.0701182221550.27270(a)alf.uib.no> Hello ! > I just installed Nav v3 beta on a Freebsd 6.2 from ports. Installation went > without any major problems and after playing with apache config I was able to > see the index page. > however, after clicking on Login, I got the following: Please update your FreeBSD ports ! On 2007/01/15 the nav port was updated to Nav-3.1.0, soon you will also see the port updated to version 3.1.1 and/or 3.2. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From cwhitlatch at ctctele.com Thu Jan 18 14:49:55 2007 From: cwhitlatch at ctctele.com (Mr. Caryl Whitlatch) Date: Thu Jan 18 22:50:03 2007 Subject: [Nav-users] adding devices - SNMP Message-ID: <000701c73b4a$9744ddc0$4732a8c0@cwhitlatch> Get error when adding IP device "Gw router - layer 3 device" I too am getting this error and so I tried to do the bulk add and get the following. HYPERLINK "https://goozzy.ctcweb.net/images/lys/yellow.png" 2 McCall Closet:66.232.X.X:CTC:GW:ro:******* RO given, but failed to contact IP device by SNMP (IP devices of this category are required to answer). HYPERLINK "https://goozzy.ctcweb.net/images/lys/yellow.png" 3 CAM CO:66.232.X.X:CTC:GW:ro:******* RO given, but failed to contact IP device by SNMP (IP devices of this category are required to answer). My NAV box has a 10.7.x.x addy behind an Astaro Linux firewall and that is doing the NAT translation. I have used Zenoss in this same network setup and not had a problem with SNMP but I found it too hard to configure so am trying NAV. I even tried opening up all ports so no traffic coming back would be blocked. I see the SNMP traffic leave my NAV box and go across through the firewall. I can telnet from my NAV box to the router. I can do a snmpwalk to that router from the NAV box so I know it can see it and get SNMP traffic back through the firewall. I followed the instructions for installation on HYPERLINK "http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4"http://metanav.ntnu.no/mo in.cgi/InstallingOnRHEL4 - VERY NICE BTW! It would be nice to be able to add devices with the autodiscovery but I am not sure it would work since I don't seem to be getting SNMP response from the routers. They were sending it to Zenoss so I am really confused. Thanks for any help I can get on overcoming this issue. Caryl A. Whitlatch Network Administrator HYPERLINK "http://www.ctcweb.net/"CTC Telecom, Inc. Plurima ignoro, sed ignorantiam meam non ignoro -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.14/637 - Release Date: 1/18/2007 1:03 PM -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.14/637 - Release Date: 1/18/2007 1:03 PM

1 0

SV: Ang: [Nav-users] Get error when adding IP device "Gw router - layer 3 device"
by peder.sefland＠hivolda.no 12 Des '06

12 Des '06

Hi, I have experience the same thing. I have notice something but not sure if this is the problem. When you add ip device and select the Catagory GW (Router (layer 3 device)) it has double brackets in its name. Non of the others Catagory has double brackets in its name. Like GSW (A layer 2 and layer 3 device) Peder >>> Den 11. desember 2006 kl. 15:45:54, i meldingen <C34A6DE4A78B8549AC97E5C414E2D2591A8F57(a)postmann.it-as.no>, skrev "Tor Pretorius" <tor.pretorius(a)it-as.no>: > I have add many Switch and GSW device > but get error when I adding GW device > > Any idea ?? > > (NAV 3.1.1 run on Centos 4.4) > -------------------- Start Error ----------------- > Mod_python error: "PythonHandler editdb" > > Traceback (most recent call last): > > File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line > 299, in HandlerDispatch > result = object(req) > > File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in > handler > output = editPage(req,pageList[table](),request,unicodeError) > > File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 463, in > editPage > outputForm,action) > > File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 2323, in > add > box.getDeviceId() > > File "/usr/local/nav/apache/webroot/editdb/initBox.py", line 178, in > getDeviceId > escapedSerials = [nav.db.escape(ser.strip()) for ser in serials > > File "/usr/local/nav/apache/webroot/editdb/initBox.py", line 161, in > is_ascii > s.encode("ascii") > > AttributeError: 'int' object has no attribute 'encode' > > -------------------- End Error ----------------- > > > Mvh > -Tor Pretorius > > > > _______________________________________________ > nav-users mailing list > nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >From Rufus at uiuc.edu Mon Dec 4 09:15:25 2006 From: Rufus at uiuc.edu (Yong) Date: Wed Feb 7 23:05:45 2007 Subject: [Nav-users] =?iso-8859-1?q?Vi_foresl=D0=B5r_et_arbeid!?= Message-ID: <C560BC84.5926438(a)uiuc.edu> Job-agency.biz Featured Employer: R-Money ?? Get more from R-Money?? [grey_top2.jpg] ??????Job-Managment Agency??????har et ledig arbeid for deg! - Arbeid i fri tid og Du skal f?? fra 5000 til 10000 euro i en m??ned! - Det trenges ikke noen penger fra Deg . - Du kan begynne ?? f?? l??n imorgen! Hvis Du har 2-3 frie timer, Du har lyst til ?? f?? penger, Du er ansvarlig og Du har fylt dine 18 ??r, dette er et tilbud for Deg! Hvis Du er interessert, Du kan gi oss bevist til v??r e-post adressen [1]info(a)job-agency.biz: om Din ful navn, adress(byen og staten), f??dselsdag, telefonnumer, undervisning og arbeidssteder som Du hadde f??r. Vi ber Dere om ?? studere tilbudet og gi oss beskjed om Dere aksepterer det. Din e-post adressen er tatt fra frie kilder. Hvis du vil ikke f?? meldinger fra oss til din e-post adressen, kan du sende en blank melding ???remove(a)job-agency.biz??? til v??r e-post adressen. References 1. mailto:info@job-agency.biz

1 0

Installing NAV on SLES9
by martin.roll＠elementum.info 01 Des '06

01 Des '06

Yes, I installed pysnmp (2.0.9) as described in the SLES guide. I used the package nav-3.0.0-1.noarch.rpm that is located at MetaNAV download page: http://metanav.ntnu.no/moin.cgi/NAVDownload It seems to be be NAV 3.0 beta. Should I better try to compile it from source? Sorry for my late answer. Morten Brekkevold wrote: > Martin Roll wrote, On 22-11-2006 19:01: > > >> File "/usr/local/nav/apache/webroot/editdb/initBox.py", line 29, in ? >> from nav.Snmp import Snmp,NameResolverException,TimeOutException >> >> ImportError: cannot import name Snmp >> > > [...] > > >> File "/usr/local/nav/lib/python/nav/Snmp.py", line 24, in ? >> from pysnmp.proto import v1, v2c >> >> ImportError: No module named proto >> >> >> Do you have any idea what I could have done wrong? >> > > Looks like NAV's nav.Snmp module hasn't been fully imported because > pysnmp is missing, and this might be why you are seeing both these messages. > > Did you install pysnmp, as the SLES guide you pointed to says? What > version of NAV are you installing? > >

1 0

trenger en nav-3-0-0-vmware-DVD
by peder.sefland＠hivolda.no 24 Nov '06

24 Nov '06

Hei, Vi delte ut litt for ivrig nav-3-0-0-vmware p? uninett-konferansen, det vil si alle dvd-platene. ftp-serveren vi brukte er reinstallert. Jeg har dermed ingen ? sende til andre som sp?r om ? f? test nav via vmware. Kan noen som var p? nav workshop p? uninett konferansen i ?lesund sende meg en slik DVD. Neste gang (med nav-3.1.1-vmware) skal jeg beholde en plate selv :-) Peder

2 1

trenger en nav-3-0-0-vmware-DVD
by Ketil.Forselv＠hin.no 24 Nov '06

24 Nov '06

Hei Peder Jeg har en kopi. Skal jeg legge et image av CD'en p? FTP til deg? mvh Ketil Peder Magne Sefland said: > Hei, > > Vi delte ut litt for ivrig nav-3-0-0-vmware p? uninett-konferansen, det > vil si alle dvd-platene. ftp-serveren vi brukte er reinstallert. Jeg har > dermed ingen ? sende til andre som sp?r om ? f? test nav via vmware. > Kan noen som var p? nav workshop p? uninett konferansen i ?lesund sende > meg en slik DVD. > > Neste gang (med nav-3.1.1-vmware) skal jeg beholde en plate selv :-) > > > Peder > > > _______________________________________________ > nav-users mailing list > nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

1 0

small bug in initBox.py
by morten.brekkevold＠uninett.no 20 Nov '06

20 Nov '06

Hans-Peter Fuchs wrote, On 16-11-2006 10:07: > This is because the 7606 answers with 'integers' to 1.3.6.1.4.1.9.3.6.11.1.4. > > With this change to initBox.py I could add this device: > > 162c162 > < except UnicodeDecodeError, e: > --- > > except AttributeError or UnicodeDecodeError, e: Thanks for the tip, Hans-Peter! -- mvh Morten Brekkevold UNINETT >From martin.roll at elementum.info Wed Nov 22 19:01:21 2006 From: martin.roll at elementum.info (Martin Roll) Date: Wed Nov 22 19:01:30 2006 Subject: [Nav-users] Installing NAV on SLES9 In-Reply-To: <4558FA04.4010102(a)elementum.info> References: <4554962A.6060104(a)elementum.info> <45583974.8060805(a)uninett.no> <4558FA04.4010102(a)elementum.info> Message-ID: <45649071.6080403(a)elementum.info> Hello again! I have discovered another Problem with my Installation and I hope you can help me with it as well. When I log in using the NAV Webinterface, everything seems fine at first. But when I click on Toolbox --> Network Explorer I get this notice: Error, could not connect to database! I have no idea what the reason for that message could be as I followed exactly the description located at http://metanav.ntnu.no/moin.cgi/InstallingOnSLES. When I click on Toolbox --> Edit database I get this weird stuff: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 457, in import_module module = imp.load_module(mname, f, p, d) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 29, in ? import editTables,nav.Snmp,sys,re,copy,initBox,forgetSQL,nav.web File "/usr/local/nav/apache/webroot/editdb/initBox.py", line 29, in ? from nav.Snmp import Snmp,NameResolverException,TimeOutException ImportError: cannot import name Snmp or that: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 457, in import_module module = imp.load_module(mname, f, p, d) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 29, in ? import editTables,nav.Snmp,sys,re,copy,initBox,forgetSQL,nav.web File "/usr/local/nav/lib/python/nav/Snmp.py", line 24, in ? from pysnmp.proto import v1, v2c ImportError: No module named proto Do you have any idea what I could have done wrong? Thanks for helping! Martin >From JanEgil.Artun at sauda.kommune.no Wed Nov 22 20:39:43 2006 From: JanEgil.Artun at sauda.kommune.no (=?iso-8859-1?Q?Jan_Egil_=C5rtun?=) Date: Wed Nov 22 20:39:49 2006 Subject: [Nav-users] NAV 3.1.1 and cricket problem Message-ID: <6D2D4563A4B76A4EB43F7E71B511D6DB43941C(a)HOLMAKNUTEN.ryfylke.local> Hello Ive installed NAV 3.1.1 on CentOS4.4 using the RHEL4 guide and it seems to work pretty good, except for a few problems. I added a few switches and a server as a test to see how things worked. Everything worked good until i added the server. When I added the server navcron started a process called Java, and this process took more and more memory until the computer running nav crashed. I removed the ip device from the database but then cricked displayed this error at the bottom of the cricket webpage: Config tree needs to be recompiled: Referenced file /usr/local/nav/cricket/cricket-config/servers/"IPofServer"/"IPofServer" The two questions I got then is: what is that java prosess that started the trouble and how can I prevent it from happening the next time I added a server? How do I get that Cricket error fixed? I feel more comfortable in a windows enviroment but NAV offer some good functionality that I think could be useful in our network, so I would really like to get this working. ---- mvh Jan Egil ?rtun Sauda Kommune >From roger.aas at hsh.no Thu Nov 23 11:17:31 2006 From: roger.aas at hsh.no (Roger Aas) Date: Thu Nov 23 11:17:57 2006 Subject: [Nav-users] Updated InstallingOnRHEL4 to cover NAV 3.1.1 Message-ID: <4565753B.1080102(a)hsh.no> I have the last days done some much needed editing of my installation description of NAV on CentOS and RHEL. The highlights: - Updated for NAV 3.1.1 - Tested on RHEL4 Update 4 and CentOS 4.4 - Added possibility for receiving syslog messages from equipment - Added sample firewall setup - No more vi edits, all done by cat and sed - Made clearer what site specific information needs to be entered and where Same link as before: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 Always nice with feedback on this document, especially if you find some errors. Best regards, - Roger -- Roger Aas Stord/Haugesund University College

1 0

Newbie Problem loading NAV on CentOS 4.4
by rkillick＠niagara.com 20 Nov '06

20 Nov '06

Roger: Thanks for the gracious and quick response to my simple problem. I just could not see how the installation could proceed without being logged in as root and your response has provide both the rational for the local user creation, and a good approach to completing the install away from the server room. Thanks for the PuTTY link. To answer your last question.. I am using the "InstallingOnRHEL4 for v3.1" with the edits by Morten Brekkevold; ### 14.11.2006 by Morten Brekkevold: ### - Updated for NAV 3.1.1. ### - NOT TESTED Thanks again, the help was much appreciated. Bob Killick

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users