Nav-users

nav-users@lister.sikt.no

1376 discussions

NAV doesn't show some data
by bertove＠gmail.com 11 Aug '05

11 Aug '05

Hi: I got nav installed and running for the most. However there is one feature that is important to me and I can't see it (although I'm sure it's there, probably my configuration is bad). When I track a machine by the mac address, I want to see which port of which router it is connected to, so that I can take off the machine immediately (physically) if I need to. RIght now, for example, I have a core switch 10.0.0.5 and there's a router 10.0.6.1 which is connected to the core. So if I track (by mac address) a machine connected to 10.0.6.1, nav tells me that it is connected to 10.0.0.5, which doesn't help me since I want to know the port on 10.0.6.1. By the way, data is being colected by cricket (I can see in the graphs). What could it be then? Is it due to wrong type selection for the ip devices? Regarding that, does it make a difference if I select GSW for all switches (SW and EDGE) ? Thanks!

2 1

NAV 3 RC2 Foundry Switch Support
by chouston＠gmail.com 11 Aug '05

11 Aug '05

Hi Guys, I am liking NAV quite a bit here, and would like to know how to get some of my Foundry stuff working a little better with it. For instance, I have a 7140 that currently (until next Tuesday morning) is providing gateways for a back-end network at a colocation facility. For it's directly connected networks, I can get MAC information in the machine tracker. This is highly cool. The design we have adopted as our standard since moving up to gigabit interconnections employs two Foundry FES X448 distribution switches running VRRP-E to float the gateway. The edge switches are connected to both of these distribution switches using 1q trunks, and the VLANs we extend to the edge are running spanning tree. The distribution swithces are connected back to a carrier network via /30 subnets, and routes are learned by them from the carrier using OSPF. In the machine tracker, I cannot search for MAC information for any of the networks owned by my Foundry switches. I can get DNS reverses, but not MACs. This would be a very cool and needed thing for us. Also, the EdgeIrons are in the database, but I get pretty much no information for them that I can find. No port information or anything. I am thinking the problems I am having are related to what SNMP information getDeviceData knows how to ferret out of the devices, but this may very well be the wrong impression to have. What information would I need to supply from either Foundry documentation, or NAV application logs that might help figure out how to fix this stuff? -- Later, Carlton Houston chouston(a)gmail.com

1 0

NAV 3 RC2 General Question
by chouston＠gmail.com 10 Aug '05

10 Aug '05

Hi All, First, I think this project has a great deal of potential, but it's merely a feeling at this point. I can't get much of anything to work. I have stopped getting python errors for the things I have been trying to get working. This without changing any code, just ironing out the details of how things should be installed, etc. I have added several switches, none of which were recognized types. These are: Foundry EdgeIron 24G-A (4) Foundry FastIron x448 Premium (2) Foundry EdgeIron 48G (1) Cisco 7140 (1) Again, this is just a few little things to start to get a feel for how things are supposed to work in NAV. I did snmp queries for the numeric value of the SysObjectID for each type, and with the exception of a difference in the 24 port edgeirons, I think because of a code revision, NAV was completely happy, and felt it recognized each box type as I added them. It was able to record the serial numbers on the edgeiron switches and the cisco 7140. I don't think the FES exposes the serial number via the console or SNMP. I get nothing in cricket at all, even though I think I have all the dependencies, etc. Until 4pm yesterday, I was getting this error in the getDeviceData.log file. It stopped mysteriously: getDeviceData.log:Aug 09 15:59:37 2005 getDeviceData_01 QUERY_NETBOX_T01-3-RUN Caught exception, should not happen: snmp/SNMPException Now I get this: Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-5-UPDATE_TYPES Num types: 33, num OIDs: 168, new oidQ: 0 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: wcuunet.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: twccore448-2.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: twccore448-1.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.23 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.21 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.22 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.24 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.25 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: wxcat2.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-5-UPDATE_NETBOXES Num netboxes: 9 (9 high, 0 new, 0 removed, 0 skipped, 0 runq, 0 active) That actually looks fine, except that I have no idea how to add an OID, and I am at a loss as to where to find documentation for it. I did a psql query on the snmpoid table, but I am unclear as to what OID I should throw in for, say, interface stats, and what response I am looking for. Any help here would be nice. Also, I get nothing but the java application with the refresh button, etc, on the vlanMap. How do I make that show stuff? There's also nothing at all listed in the network explorer. When I go into the manage devices thing, it sees all the boxes, but lists no modules for any of them. What does that mean? Any help with any of this would be greatly appreciated. -- Later, Carlton Houston chouston(a)gmail.com

2 1

Traffic Map shows nothing :/
by arajgarh＠iwu.edu 10 Aug '05

10 Aug '05

I've added a few IP devices and they show up fine. But when I click on the traffic map, all I see is the applet loading up (with the java logo). I wait but nothing happens. It's not the browser since I've tried from many computers. By the way, I'm using SSL. Any ideas? Thanks >From peder.sefland at hivolda.no Wed Aug 10 12:13:37 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Wed Aug 10 11:14:24 2005 Subject: [Nav-users] errors in alertprofil Message-ID: <s2f9e186.051(a)HVO-3.hivolda.no> When I enter the alertprofile I got these error Error creating header. navTemplate.py throws errors: Traceback (most recent call last): File "/usr/local/nav/bin/navTemplate.py", line 107, in ? main(sys.argv[1:]) File "/usr/local/nav/bin/navTemplate.py", line 79, in main print page File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 606, in respond write(filter(VFFSL(SL,"standardCSS",0)(), rawExpr='$standardCSS()')) # from line 101, col 1. File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 89, in standardCSS if VFFSL(SL,"user.preferences.hidelogo",1): NameMapper.NotFound: cannot find 'preferences' while searching for 'user.preferences.hidelogo' And there was no link to get back to the main-page of nav. I running nav3 rc2 on RHEL4 Peder Magne Sefland Avd. ingeni?r | Divisional Engineer IT-avd. | Computer Dep. H?gskulen i Volda | Volda University College Postboks 500 | Post Box 500 6101 VOLDA | N-6100 VOLDA | NORWAY 70075284 (kontor) | +4770075284 (Office) 90823914 (mob.) | +4790823914 (mobile)

2 1

Re: Error in installing nav on RHEL4
by roger.aas＠hsh.no 09 Aug '05

09 Aug '05

Hi Peder. Try editing /etc/selinux/config and setting SELINUX=disabled, then rebooting and test the same again. If it works it is SElinux that stops it from working. You could also try setting it to permissive, then you will only get audits about it but it should work. I see that there is no settings for the python-lib in the file /etc/selinux/targeted/contexts/files/file_contexts so that may be the reason it complains. - Roger Peder Magne Sefland wrote: > But I installed SUlinux and firewall. > > When I tried to access the webpage I get this error > > Mod_python error: "PythonHeaderParserHandler nav.web" > > Traceback (most recent call last): > > File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch > result = object(req) > > File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler > nav.web.auth.authenticate(req) > > File "/usr/local/nav/lib/python/nav/web/auth.py", line 90, in authenticate > conn = db.getConnection('navprofile', 'navprofile') > > AttributeError: 'module' object has no attribute 'getConnection' > > > And on the console I get even more errors > > # audit(1123578062.447.0): avc: denied { execute } for pid=1791 comm=httpd path=/usr/lib/python2.3/site-packages/psycopgmodule.so dev=dm-0 ino=489605 scontext=user_u:system_r:httpd_t tcontext=root:object_r:etc_t tclass=file

1 0

Error in installing nav on RHEL4
by peder.sefland＠hivolda.no 09 Aug '05

09 Aug '05

I have follow the instruction on http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 But I installed SUlinux and firewall. The installation went great, and when I run /usr/local/nav/bin/nav status everything is up and running. mactrace: Up cricket: Up eventEngine (pid 3020) is running... logengine: Up maintengine: Up servicemon.py (pid 3054) is running... smsd.pl (pid 3082) is running... thresholdMon: Up networkDiscovery: Up iptrace: Up safe_smsd: Up getDeviceData (pid 3114) is running... backup: Up pping.py (pid 3123) is running... Alertengine is running with process id 3156. It has been running for 0 minutes and 8 seconds. When I tried to access the webpage I get this error Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler nav.web.auth.authenticate(req) File "/usr/local/nav/lib/python/nav/web/auth.py", line 90, in authenticate conn = db.getConnection('navprofile', 'navprofile') AttributeError: 'module' object has no attribute 'getConnection' And on the console I get even more errors # audit(1123578062.447.0): avc: denied { execute } for pid=1791 comm=httpd path=/usr/lib/python2.3/site-packages/psycopgmodule.so dev=dm-0 ino=489605 scontext=user_u:system_r:httpd_t tcontext=root:object_r:etc_t tclass=file Peder Magne Sefland Avd. ingeni?r | Divisional Engineer IT-avd. | Computer Dep. H?gskulen i Volda | Volda University College Postboks 500 | Post Box 500 6101 VOLDA | N-6100 VOLDA | NORWAY 70075284 (kontor) | +4770075284 (Office) 90823914 (mob.) | +4790823914 (mobile)

1 0

AlertProfiles problem
by roger.aas＠hsh.no 09 Aug '05

09 Aug '05

I get this error when I go to Toolbox/AlertProfiles: Error creating header. navTemplate.py throws errors: Traceback (most recent call last): File "/usr/local/nav/bin/navTemplate.py", line 107, in ? main(sys.argv[1:]) File "/usr/local/nav/bin/navTemplate.py", line 79, in main print page File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 606, in respond write(filter(VFFSL(SL,"standardCSS",0)(), rawExpr='$standardCSS()')) # from line 101, col 1. File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 89, in standardCSS if VFFSL(SL,"user.preferences.hidelogo",1): NameMapper.NotFound: cannot find 'preferences' while searching for 'user.preferences.hidelogo' Also in the lower left corner I get this message both with FireFox and IE: StyleSheets Your Internet browser do not support style sheets. We reccomend using a browser which support style sheets with Alert Profiles. Someone know why I get this error? This is in RC2, I did not get this in RC1. - Roger -- Roger Aas Stord/Haugesund College

1 0

Can't add devices
by mhall＠newsstand.com 09 Aug '05

09 Aug '05

Matt Hall wrote: > Matt Hall wrote: > >> Matt Hall wrote: >> >>> try to: >>> >>>> stop nav >>>> psql manage >>>> delete from rrd_file where subsystem='cricket'; >>>> run makecricketconfig.pl as user navcron >>>> nav start >>>> >>>> >>> Done >>> >>>> >>>> >>>>> , or macs, it appears data is not being collected. > >>>>> >>>> >>>> >>>> >>>> >>>> What is getDeviceData.log telling you? >>>> >>>> >>>> >>> Guess I am still getting that error: >>> >>> Aug 08 14:38:01 2005 getDeviceData MAIN-5-INIT Running with 16 >>> threads (max) >>> Aug 08 14:38:01 2005 getDeviceData MAIN-3-INIT Could not connect to >>> database! >>> >>> This seems to look wrong, when I execute the nav startup script with >>> a status command I get the following: >>> >>> networkDiscovery: Up >>> cricket: Up >>> eventEngine does not seem to be running... >>> logengine: Up >>> maintengine: Up >>> servicemon.py (pid 2039) is running... >>> smsd.pl (pid 2050) is running... >>> thresholdMon: Up >>> mactrace: Up >>> iptrace: Up >>> safe_smsd: Up >>> getDeviceData does not seem to be running... >>> backup: Up >>> pping.py (pid 2079) is running... >>> Alertengine is running with process id 2089. >>> It has been running for 0 minutes and 31 seconds. >>> >>> Should I be worried that getDeviceData is no running? >>> >>> My path is showing correctly now in the cron jobs...Yeah!!! >>> >>> But I'm getting a notification from cron now that follows: >>> >>> Subject: smsd database connection problem >>> >>> >>> Status: 08.08.2005 14:54:04 PG_conn=SCALAR(0x8175b44) 1 >>> Reset >>> >>> Error was: >>> server closed the connection unexpectedly >>> This probably means the server terminated abnormally >>> before or while processing the request. >>> >>> >>> >>> I think I still have a path problem. I'm thinking the path still >>> isn't getting sourced in the startup script correctly. Maybe I >>> should change it from a bourne script to a bash script and use the >>> "source" command. >>> >>> Thanks for the help guys. >>> >>> Matt >>> _______________________________________________ >>> Nav-users mailing list >>> Nav-users(a)itea.ntnu.no >>> http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >> >> >> >> Just as an FYI I gave up and symbolically linked everything into >> /usr/local/jdk1.4.2/jre/lib/ext. >> Things seem to be working now, but I'm worried that I'll have problem >> with other environmental variables not being set. >> Any freebsd people here have suggestions on how to globally export >> this? I tried /etc/profile, but that doesn't seem to work since it >> isn't running with a login prompt. Freebsd has no /etc/profile.d and >> the only other option I can think of is using bash instead of sh in >> my startup scripts so that I can use the "source" statement instead >> of just using a ".". I'm not sure if this will work. > > > One step closer, now that the symlinks are inSQLException for update > statement: INSERT INTO swport > (swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) > VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') > org.postgresql.util.PSQLException: This statement has been closed. > at > org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Statement.java:2304) > > at > org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2Statement.java:432) > > at > org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:268) > > at no.ntnu.nav.Database.Database.update(Database.java:987) > at no.ntnu.nav.Database.Database.insert(Database.java:911) > at > no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(SwportHandler.java:217) > > at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) > at QueryNetbox.run(QueryNetbox.java:775) > place I get SQL Exeptions in the getDeviceData-stderr.log: > > Matt Sorry, here is the proper cut and paste job: One step closer, now that the symlinks are in place I get SQL Exeptions in the getDeviceData-stderr.log: SQLException for update statement: INSERT INTO swport (swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') org.postgresql.util.PSQLException: This statement has been closed. at org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Statement.java:2304) at org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2Statement.java:432) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:268) at no.ntnu.nav.Database.Database.update(Database.java:987) at no.ntnu.nav.Database.Database.insert(Database.java:911) at no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(SwportHandler.java:217) at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) at QueryNetbox.run(QueryNetbox.java:775) Matt >From arajgarh at iwu.edu Mon Aug 8 16:34:38 2005 From: arajgarh at iwu.edu (Aditya Rajgarhia) Date: Mon Aug 8 22:34:48 2005 Subject: [Nav-users] Can't add devices Message-ID: <966713.1123533278086.JavaMail.arajgarh(a)iwu.edu> I used to get those org.postgresql.jdbc2 errors. I messed with different versions of the jdbc postgresql drivers and it fixed those: http://jdbc.postgresql.org/download.html Put the jar file in the jre/lib/ext directory, try different versions maybe like I did. ------------------------------------------------------------------------ ---------------------------- >SQLException for update statement: INSERT INTO swport >(swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) >VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') >org.postgresql.util.PSQLException: This statement has been closed. > at >org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Sta tement.java:2304) > > at >org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2 Statement.java:432) > > at >org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2S tatement.java:268) > > at no.ntnu.nav.Database.Database.update(Database.java:987) > at no.ntnu.nav.Database.Database.insert(Database.java:911) > at >no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(Sw portHandler.java:217) > > at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) > at QueryNetbox.run(QueryNetbox.java:775) > > >Matt >_______________________________________________ >Nav-users mailing list >Nav-users(a)itea.ntnu.no >http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > ---------------- Aditya Rajgarhia 305 Kemp Hall x2042 arajgarh(a)iwu.edu >From arajgarh at iwu.edu Mon Aug 8 16:36:37 2005 From: arajgarh at iwu.edu (Aditya Rajgarhia) Date: Mon Aug 8 22:36:42 2005 Subject: [Nav-users] NullPointerException Message-ID: <4556391.1123533397154.JavaMail.lumadmin(a)my.iwu.edu> I get this in the getDeviceData-stderr.log whenever it tries to get data. Any clue? THanks java.lang.NullPointerException at no.ntnu.nav.getDeviceData.deviceplugins.StaticRoutes.StaticRoutes.proces sCiscoGw(StaticRoutes.java:261) at no.ntnu.nav.getDeviceData.deviceplugins.StaticRoutes.StaticRoutes.handle Device(StaticRoutes.java:127) at QueryNetbox.run(QueryNetbox.java:770) ---------------- Aditya Rajgarhia 305 Kemp Hall x2042 arajgarh(a)iwu.edu >From roar.pettersen at uib.no Tue Aug 9 09:21:41 2005 From: roar.pettersen at uib.no (Roar Pettersen) Date: Tue Aug 9 08:21:50 2005 Subject: [Nav-users] Can't add devices In-Reply-To: <42F7BAFF.9080506(a)newsstand.com> References: <200508081944.j78JiHHW039752(a)duke.cc.uit.no> <42F7B91F.4040502(a)newsstand.com> <42F7BAFF.9080506(a)newsstand.com> Message-ID: <Pine.GSO.4.61.0508090819190.24379(a)alf.uib.no> Hello ! > Any freebsd people here have suggestions on how to globally export this? I > tried /etc/profile, but that doesn't seem to work since it isn't running with > a login prompt. Freebsd has no /etc/profile.d and the only other option I > can think of is using bash instead of sh in my startup scripts so that I can > use the "source" statement instead of just using a ".". I'm not sure if this > will work. A good advise is to always use bash as shell and put the enviroment varibles in the eg .bash_profile : cat /root/.bash_profile export PYTHONPATH=/usr/local/nav/lib/python export JAVA_HOME=/usr/local/jdk1.4.2 export PATH=$PATH:/usr/local/nav/bin:/usr/local/jdk1.4.2/bin export PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib export CLASSPATH="`echo /usr/local/nav/lib/java/*.jar | tr ' ' ':'`:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/ja va/classes/snmp.jar" -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From Jan.Susegg at hint.no Tue Aug 9 10:10:54 2005 From: Jan.Susegg at hint.no (Susegg, Jan) Date: Tue Aug 9 09:08:54 2005 Subject: [Nav-users] Problems with getDeviceData Message-ID: <8A65B72C71E7484FBE1862045AAC5A8FB73B24(a)embla.ansatt.hint.no> Skipped content of type multipart/alternative

1 0

Can't add devices
by Borge.Brunes＠cc.uit.no 09 Aug '05

09 Aug '05

mhall(a)newsstand.com said: > I also tried adding "su -f -m navcron -c" for my startup script exec > to ensure that it was kicked off as navcron. I don't think I'm > getting the error anymore good. > but there are no ports showing up for my > devices in NAV try to: stop nav psql manage delete from rrd_file where subsystem='cricket'; run makecricketconfig.pl as user navcron nav start > , or macs, it appears data is not being collected. > What is getDeviceData.log telling you? > I may have gotten ahead of myself and screwed some things up. I'm > sorry guys, I'm not much of a sysadmin, mostly a network architect > type of guy. Most of us are :-) > FYI I'm getting this error from cron: > Subject: Cron <navcron@aus-nav-1> $BINDIR/getBoksMacs.sh $NUM_THREADS > X-Cron-Env: <PERL5LIB=> X-Cron-Env: <PYTHONPATH=> X-Cron-Env: <CLASSPATH=> > X-Cron-Env: <BINDIR=/usr/local/nav/bin> X-Cron-Env: <LOCALSTATEDIR=/usr/local/ > nav/var> X-Cron-Env: <PATH=/usr/bin:/bin:/usr/local/bin> X-Cron-Env: > <MAILTO=root@localhost> X-Cron-Env: <CRICKETDIR=/usr/local/cricket> > X-Cron-Env: <NUM_THREADS=24> X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/ > usr/local/nav> X-Cron-Env: <LOGNAME=navcron> X-Cron-Env: <USER=navcron> > createConnection ClassNotFoundExecption error: org.postgresql.Driver Something is wrong with your enviroment. Here is is mine: Subject: Cron <navcron@franklin> $BINDIR/getBoksMacs.sh $NUM_THREADS X-cron-env: <PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib> X-cron-env: <PYTHONPATH=/usr/local/nav/lib/python> X-cron-env: <CLASSPATH=/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/java/Database.jar:/usr/local/nav/lib/java/Event.jar:/usr/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.jar:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/java/classes/snmp.jar> X-cron-env: <BINDIR=/usr/local/nav/bin> X-cron-env: <LOCALSTATEDIR=/usr/local/nav/var> X-cron-env: <PATH=/usr/bin:/bin:/usr/local/bin> X-cron-env: <MAILTO=root@localhost> X-cron-env: <CRICKETDIR=/usr/local/cricket> X-cron-env: <NUM_THREADS=24> X-cron-env: <SHELL=/bin/sh> X-cron-env: <HOME=/usr/local/nav> X-cron-env: <LOGNAME=navcron> X-cron-env: <USER=navcron> regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

2 2

Can't add devices
by mhall＠newsstand.com 08 Aug '05

08 Aug '05

Borge Brunes wrote: >mhall(a)newsstand.com said: > > >>Ok now I get a new problem, I can't seem to get my Classpath and such loaded >>for the scripts. GetDeviceData-stderr.log is popping out "createConnection >>ClassNotFoundExecption error: org.postgresql.Driver. I've added the contents >>of the navenv.sh to the /etc/profile and I am sourcing this file in all of >>the startup scripts in /usr/local/etc/rc.d using ". /etc/profile" . I >>inserted a "set" and piped it to a file in all of the startup scripts so that >>I could make sure their environments were right during startup, and they all >>seem to be. >> >> > > > >>I'm at a loss on how to fix this now, any suggestions? >> >> > >http://desperados.itea.ntnu.no/pipermail/nav-users/2005-July/000875.html >Could you give us the output from 'env' in the shell you have started NAV? > >Have you innstalled NAV from ports? > >regards, > > > I installed from the ports tree. env output: HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/jdk1.4.2/bin:/usr/local/nav/bin:/usr/local/jdk1.4.2/bin PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib CLASSPATH=/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/java/Database.jar:/usr/local/nav/lib/java/Event.jar:/usr/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.jar:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/java/classes/snmp.jar JAVA_HOME=/usr/local/jdk1.4.2 PYTHONPATH=/usr/local/nav/lib/python I also tried adding "su -f -m navcron -c" for my startup script exec to ensure that it was kicked off as navcron. I don't think I'm getting the error anymore but there are no ports showing up for my devices in NAV, or macs, it appears data is not being collected. I may have gotten ahead of myself and screwed some things up. I'm sorry guys, I'm not much of a sysadmin, mostly a network architect type of guy. Matt >From mhall at newsstand.com Mon Aug 8 15:11:12 2005 From: mhall at newsstand.com (Matt Hall) Date: Mon Aug 8 21:11:25 2005 Subject: [Nav-users] Can't add devices In-Reply-To: <42F7AD5E.7080101(a)newsstand.com> References: <200508081832.j78IW96C039014(a)duke.cc.uit.no> <42F7AD5E.7080101(a)newsstand.com> Message-ID: <42F7AE50.4020600(a)newsstand.com> Matt Hall wrote: > Borge Brunes wrote: > >> mhall(a)newsstand.com said: >> >> >>> Ok now I get a new problem, I can't seem to get my Classpath and >>> such loaded >>> for the scripts. GetDeviceData-stderr.log is popping out >>> "createConnection >>> ClassNotFoundExecption error: org.postgresql.Driver. I've added the >>> contents >>> of the navenv.sh to the /etc/profile and I am sourcing this file in >>> all of >>> the startup scripts in /usr/local/etc/rc.d using ". /etc/profile" . I >>> inserted a "set" and piped it to a file in all of the startup >>> scripts so that >>> I could make sure their environments were right during startup, and >>> they all >>> seem to be. >>> >> >> >> >> >>> I'm at a loss on how to fix this now, any suggestions? >>> >> >> >> http://desperados.itea.ntnu.no/pipermail/nav-users/2005-July/000875.html >> Could you give us the output from 'env' in the shell you have started >> NAV? >> Have you innstalled NAV from ports? >> >> regards, >> >> >> > I installed from the ports tree. > env output: > HOME=/ > PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/jdk1.4.2/bin:/usr/local/nav/bin:/usr/local/jdk1.4.2/bin > > PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib > CLASSPATH=/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/java/Database.jar:/usr/local/nav/lib/java/Event.jar:/usr/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.jar:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/java/classes/snmp.jar > > JAVA_HOME=/usr/local/jdk1.4.2 > PYTHONPATH=/usr/local/nav/lib/python > > I also tried adding "su -f -m navcron -c" for my startup script exec > to ensure that it was kicked off as navcron. I don't think I'm > getting the error anymore but there are no ports showing up for my > devices in NAV, or macs, it appears data is not being collected. > > I may have gotten ahead of myself and screwed some things up. I'm > sorry guys, I'm not much of a sysadmin, mostly a network architect > type of guy. > > Matt > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users FYI I'm getting this error from cron: Subject: Cron <navcron@aus-nav-1> $BINDIR/getBoksMacs.sh $NUM_THREADS X-Cron-Env: <PERL5LIB=> X-Cron-Env: <PYTHONPATH=> X-Cron-Env: <CLASSPATH=> X-Cron-Env: <BINDIR=/usr/local/nav/bin> X-Cron-Env: <LOCALSTATEDIR=/usr/local/nav/var> X-Cron-Env: <PATH=/usr/bin:/bin:/usr/local/bin> X-Cron-Env: <MAILTO=root@localhost> X-Cron-Env: <CRICKETDIR=/usr/local/cricket> X-Cron-Env: <NUM_THREADS=24> X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/usr/local/nav> X-Cron-Env: <LOGNAME=navcron> X-Cron-Env: <USER=navcron> createConnection ClassNotFoundExecption error: org.postgresql.Driver

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users