- Nav-users - lister.unit.no

[Nav-users] Software versions not retrieved for most routers and switches
by roger.aas＠hsh.no 27 Jun '05

27 Jun '05

In NAV2 I used the "Rapportgenerator" (Report generator) to get a listing of the software versions that was on my routers and switches. It was only the Cisco 1900 series switches that did not get listed with a software version number in NAV2. I also missed the sw version number data for AP's, but it seemed like there were no support for that in NAV2. This report was very valuable since I could get a listing of which boxes needed to be upgraded if there were reported some security advisory for a specific software version. But in NAV3 most of my switches is listed without software version. It is only some of the included types that lists up version numbers. This is the wsc5000, wsc5505 and the catalyst297024TS. One type that is included, cat4506, does not report the sw version (but that one also has a supervisor 5 card, not a "sup4" that is in the description). But I have many types of 2950, a 2912 and a 4510r that does not list the sw version. The "Wireless" report in NAV3 have a coloumn for Software but all my C1100's and C1200's and two Avaya ROR-II AP's does not report software version either. Is this a known problem? - Roger -- Roger Aas Stord/Haugesund College

2 1

Installation Trouble
by kreide＠gmail.com 21 Jun '05

21 Jun '05

> /BUILD FAILED > /root/nav-3.0_rc1/src/SimpleSnmp/build.xml:30: Compile failed; see the > compiler error output for details./ Although you didn't include the actual error message I am guessing the compile failed because you are missing the Java SNMP package. Install this and it should compile. -- Kristian NAV developer

1 0

Postgres : unexpected EOF on client connection
by roar.pettersen＠it.uib.no 10 Jun '05

10 Jun '05

Hello ! I've installed NAV 3.0-rc1, and i have a postgres problem with too many postgres processes, eg : postmaster: navwrite manage 127.0.0.1 idle (postgres) postmaster: navwrite manage 127.0.0.1 idle (postgres) postmaster: navwrite navprofiles 127.0.0.1 idle (postgres) postmaster: navwrite manage 127.0.0.1 idle (postgres) postmaster: navwrite navprofiles 127.0.0.1 idle (postgres) postmaster: navwrite manage 127.0.0.1 idle (postgres) postmaster: navwrite navprofiles 127.0.0.1 idle (postgres) When i have more than 30-35 processes, then NAV stops working, and i have to stop and start the database. Looking into my postgres log file i see this : postgres[67232]: LOG: unexpected EOF on client connection postgres[67233]: LOG: unexpected EOF on client connection postgres[67234]: LOG: unexpected EOF on client connection postgres[67235]: LOG: unexpected EOF on client connection postgres[67236]: LOG: unexpected EOF on client connection postgres[67237]: LOG: unexpected EOF on client connection Anybody have a clue ? -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kreide at gmail.com Fri Jun 10 13:28:37 2005 From: kreide at gmail.com (Kristian Eide) Date: Fri Jun 10 12:28:53 2005 Subject: [Nav-users] Postgres : unexpected EOF on client connection In-Reply-To: <Pine.GSO.4.61.0506101108230.4532(a)alf.uib.no> References: <Pine.GSO.4.61.0506101108230.4532(a)alf.uib.no> Message-ID: <200506101228.41534.kreide(a)gmail.com> > I've installed NAV 3.0-rc1, and i have a postgres > problem with too many postgres processes, eg : NAV does use quite a few database connections (on our production machine here I see 17 active now) as each subsystem needs one or more connections (heavily threaded subsystems may use more than one connection) and each http process will also require a connection. > When i have more than 30-35 processes, then NAV stops > working, and i have to stop and start the database. This seems like too many though, unless you have apache configured to spawn a high numer of processes. > postgres[67237]: LOG: unexpected EOF on client connection Yes, we get these as well. The culprit seems to be alertengine, probably it is not closing its database collections properly (and this also seems to indicate it is opening a new database connection each time it polls the alertq, which is highly inefficient). Andreas, can you take a look at this? I also get a few of these in the log when starting alertengine: 2005-06-10 12:20:52 ERROR: syntax error at end of input at character 90 -- Kristian

1 0

svn.nav.ntnu.no DOWN?
by tlan＠itea.ntnu.no 03 Jun '05

03 Jun '05

Borge Brunes: > HTTP/1.1 500 Internal Server Error > > This XML file does not appear to have any style information > associated with it. The document tree is shown below. > > - <D:error> > <C:error/> > <m:human-readable errcode="160029"> > Could not open the requested SVN filesystem > </m:human-readable> > </D:error> There was a problem with the BerkleyDB-files on the subversion (they're holding all the metadata for subversion). It should be fixed by now, tho. Try again and see if the problem still occurs? -- Thomas >From kreide at gmail.com Fri Jun 3 14:15:19 2005 From: kreide at gmail.com (Kristian Eide) Date: Fri Jun 3 13:16:25 2005 Subject: [Nav-users] svn.nav.ntnu.no DOWN? In-Reply-To: <20050603110920.GA5623(a)stud.ntnu.no> References: <200506030943.j539hdF4044758(a)duke.cc.uit.no> <20050603110920.GA5623(a)stud.ntnu.no> Message-ID: <200506031315.25539.kreide(a)gmail.com> > There was a problem with the BerkleyDB-files on the subversion > (they're holding all the metadata for subversion). It should be fixed > by now, tho. We should consider switching to the FSFS (plain text files) storage format for subversion to avoid any chance of DB corruption. This format has also been made the default in the latest subversion release due to the problems users have experienced with BerkleyDB. -- Kristian

1 0

NAV workshop
by Vidar.Faltinsen＠uninett.no 01 Jun '05

01 Jun '05

Hi, We are planning a NAV workshop here in Trondheim on monday June 13. As we suspect this will only attract a Norwegian audience, the following is in Norwegian. (If I am wrong, please give me a hint): Vi har laget wiki-sider som beskriver programmet. Programmet er p? mandag 13. juni fra kl 15->. [1] S? alle NAVere - meld dere p? (en del av dere er forh?ndp?meldt)! Gj?r oppmerksom p? at vi m? sette en grense oppad. I utagnspunktet 50 stk. Vi vil kanskje ogs? m?tte gj?re en begrensning med antall fra hver enkelt institusjon om n?dvendig. Les mer p?: * http://metanav.ntnu.no/moin.cgi/NAVFagseminar Jeg kan ogs? r?pe at vi i neste uke kommer med en NAV 3.0 release candidate. F?lg med. [1] Det er lagt til dette tidspunktet bl.a. fordi det korresponderer med et gigacampus arbeidsgruppem?te som er dagen etter (dette m?tet diskuterer overv?kning mer generelt og deltagere er de som inng?r i arbeidsgruppen, disse er forh?ndsp?meldt NAV fagseminaret). -- mvh - Vidar >From magnus at ntnu.no Wed Jun 1 17:01:33 2005 From: magnus at ntnu.no (Magnus Nordseth) Date: Wed Jun 1 16:01:35 2005 Subject: [Nav-users] Another questions about vlanPlot In-Reply-To: <s29dd972.064(a)HVO-3.hivolda.no> References: <s29dd972.064(a)HVO-3.hivolda.no> Message-ID: <20050601140133.GH17281(a)stud.ntnu.no> Peder Magne Sefland: > I'm running nav3 on debian-sarge and found the file under > > locate vlanPlot.py > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.py > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.pyc > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.pyo > > I made a copy of the original file and tried to do some changes here, > but no success. > How do I manually set the hostname or ip-address? It assumes you are running tomcat, the cricket front end and the NAV frontend on the same server. This could be a bit inflexible for some installations. The hostname is defined on the line server = req.server.server_hostname which extracts the hostname from the current http request. You can modify this line so it suits your needs. However, this hostname is used for vPServerURL, lastURL, cricketURL and netflowURL. If you want different hostnames for only some of them, you have to modify how the params are defined. I probably should move all this out to a config file some day. Also note that you have to restart apache after you have made your changes to ensure mod_python reloads the new file. HTH and best regards, -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc >From peder.sefland at hivolda.no Wed Jun 1 17:59:56 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Wed Jun 1 17:00:38 2005 Subject: SV: Re: Re: [Nav-users] Another questions about vlanPlot Message-ID: <s29de9ae.024(a)HVO-3.hivolda.no> Thank you Kristian and Magnus. I can see the local gatewayswitch(GSW) and all the switches(SW) under it. I don't see any data being collected, but maybe I need to set up a link between our gatewayswitch uninett's router before I can see any traffic. Peder >>> Kristian Eide <kreide(a)gmail.com> 01.06.2005 15:58:09 >>> > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.py > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.pyc > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.pyo I see on our production server we have: /usr/local/nav/lib/python/nav/web/pyproxy/vlanPlot.py You can probably edit the file in site-packages as well. You may need to delete the two last files and restart apache for the changes to take effect. The hostname can be manually set in this file, e.g. add: server = 'myserver.domain.no' Right above the line params = "". -- Kristian >From kreide at gmail.com Thu Jun 2 00:08:53 2005 From: kreide at gmail.com (Kristian Eide) Date: Wed Jun 1 23:15:50 2005 Subject: [Nav-users] BoxDown 0 d, 00 h, 00 min In-Reply-To: <s29b066b.091(a)HVO-3.hivolda.no> References: <s29b066b.091(a)HVO-3.hivolda.no> Message-ID: <200506012308.58888.kreide(a)gmail.com> > I have tried your solution Kristian, and it got better. I don't get > BoxDown 0 d, 00 h, 00 min anymore, but I still get too many alerts with > very short time between down and up. After having looked at the logs I now know why this is happening. If a box is going down and up with very short intervals it can happen that eventengine sends out messages right after a box is reported down like your are experiencing. I will try to come up with a change to eventengine to prevent this from happening. -- Kristian

1 0

SV: Re: [Nav-users] Another questions about vlanPlot
by peder.sefland＠hivolda.no 01 Jun '05

01 Jun '05

I'm running nav3 on debian-sarge and found the file under locate vlanPlot.py /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.py /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.pyc /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.pyo I made a copy of the original file and tried to do some changes here, but no success. How do I manually set the hostname or ip-address? Peder >>> Kristian Eide <kreide(a)gmail.com> 01.06.2005 15:27:29 >>> > This file does not exist! > I think it was removed some time around beta4? You are quite right; it seems it was removed by another developer. The server name is now automatically set as the same URL used for accessing vlanPlot itself, however, it can be changed manually by editing: /usr/local/nav/apache/webroot/vlanPlot/vlanPlot.py Look for 'vPServerURL' and 'cricketURL'. -- Kristian >From kreide at gmail.com Wed Jun 1 16:58:09 2005 From: kreide at gmail.com (Kristian Eide) Date: Wed Jun 1 15:58:15 2005 Subject: [Nav-users] Another questions about vlanPlot In-Reply-To: <s29dd972.063(a)HVO-3.hivolda.no> References: <s29dd972.063(a)HVO-3.hivolda.no> Message-ID: <b4c110fd050601065861b1fc57(a)mail.gmail.com> > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.py > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.pyc > /usr/lib/python2.3/site-packages/nav/web/pyproxy/vlanPlot.pyo I see on our production server we have: /usr/local/nav/lib/python/nav/web/pyproxy/vlanPlot.py You can probably edit the file in site-packages as well. You may need to delete the two last files and restart apache for the changes to take effect. The hostname can be manually set in this file, e.g. add: server = 'myserver.domain.no' Right above the line params = "". -- Kristian

1 0

Another questions about vlanPlot
by Borge.Brunes＠cc.uit.no 01 Jun '05

01 Jun '05

kreide(a)gmail.com said: > server. But when I click on the Traffic Map, the Java Console show these > Where do I change the ip-address? > In /usr/local/nav/etc/vlanPlot.conf. This file does not exist! I think it was removed some time around beta4? regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

2 1

2 questions about vlanPlot
by kreide＠gmail.com 01 Jun '05

01 Jun '05

> 1. Where does vlanPlot read its traffic data from? We have now 50% of the > links coloured while the rest are black (no data). There is no obvius pattern. We have the same problem here at NTNU. I will investigate and report back. > 2. When you right-click on a link you can view traffic data from cricket, but > the links are somewhat mangled: Yes, this is some old behaviour left over from NAVv2. I will update it to NAVv3. -- Kristian

1 0

Another questions about vlanPlot
by peder.sefland＠hivolda.no 01 Jun '05

01 Jun '05

I installed my nav3 on vmware-workstation an later moved it to a vmware server. But when I click on the Traffic Map, the Java Console show these messages. Blanker Nettel-hash Reseter group-vector URL: https://192.168.0.192/vPServer/servlet/vPServer?section=boks&gruppeid=0&req… Create new ServerFetcher Waiting on inputQ... Exception: access denied (java.net.SocketPermission 192.168.0.192:443 connect,resolve) Where do I change the ip-address? Peder Sefland >From kreide at gmail.com Wed Jun 1 16:00:56 2005 From: kreide at gmail.com (Kristian Eide) Date: Wed Jun 1 15:01:25 2005 Subject: [Nav-users] Another questions about vlanPlot In-Reply-To: <s29dcbd8.092(a)HVO-3.hivolda.no> References: <s29dcbd8.092(a)HVO-3.hivolda.no> Message-ID: <b4c110fd050601060036b6bc1c(a)mail.gmail.com> > server. But when I click on the Traffic Map, the Java Console show these > Where do I change the ip-address? In /usr/local/nav/etc/vlanPlot.conf. -- Kristian

1 0

Compiling Nav from SVN fails
by odd.hauge＠hiMolde.no 01 Jun '05

01 Jun '05

Ok. What I did was compiling the Database.jar in the trunk/src/Database/dist/ directory, copied it to /usr/local/nav/lib/java folder and then compiled the rest of Nav. Now Nav compiles without errors... Have I missed anything ? - odd arne -----Original Message----- From: nav-users-bounces(a)itea.ntnu.no on behalf of Kristian Eide Sent: Tue 05/31/05 19:30 To: nav-users(a)itea.ntnu.no Cc: Hauge Odd Arne Subject: Re: [Nav-users] Compiling Nav from SVN fails > I'm trying to compile Nav3 from the latest SVN update. When compiling > getDeviceData following error occurs: You will need to update the Database package as well (and install the Database.jar file before compiling getDeviceData). -- Kristian

1 0

SV: Re: [Nav-users] BoxDown 0 d, 00 h, 00 min
by peder.sefland＠hivolda.no 30 Mai '05

30 Mai '05

I have tried your solution Kristian, and it got better. I don't get BoxDown 0 d, 00 h, 00 min anymore, but I still get too many alerts with very short time between down and up. This is an automatically generated message from NAV: Box volda-myrane1-MB-sw200.hivolda.no (158.38.86.6) is down since 2005-05-28 17:57:27. This is an automatically generated message from NAV: Box volda-myrane1-MB-sw200.hivolda.no (158.38.86.6) is up since 2005-05-28 17:58:08. We where looking forward to the Service-alert function in nav3. But we have the same problem there. I might get an alert that https is down on a server, but if I try that server right away it resond just fine. Peder Sefland >>> Kristian Eide <kreide(a)online.no> 19.03.2005 12:35:11 >>> > I get many alert with BoxDown 0 d, 00 h, 00 min > Sysname IP From To Downtime boxState > XXXXX.hivolda.no 158.38.XX.XXX 02:54 18-03-05 02:55 18-03-05 > 0 d, 00 h, 00 min boxDown I believe this is due to some debug code that was unfortunately included in a beta release which sets the default wait time for event engine to a very low (5 seconds) value. You can fix this problem by uncommenting the line in eventEngine.conf which sets the alertTickLength (default is 60 seconds) and restart event engine. Note that there should not be a semicolon at the end of the line, so if there is one remove it. -- Kristian >From odd.hauge at hiMolde.no Tue May 31 20:27:49 2005 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Tue May 31 19:27:55 2005 Subject: [Nav-users] Compiling Nav from SVN fails Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C201A560(a)stam.himolde.no> Hi. I'm trying to compile Nav3 from the latest SVN update. When compiling getDeviceData following error occurs: [javac] Compiling 1 source file to /usr/local/src/nav/svn/trunk/src/getDeviceData/data-plugins/Gwport/build [javac] /usr/local/src/nav/svn/trunk/src/getDeviceData/data-plugins/Gwport/src/no/ntnu/nav/getDeviceData/dataplugins/Gwport/GwportHandler.java:196: cannot resolve symbol [javac] symbol : method free (java.sql.ResultSet) [javac] location: class no.ntnu.nav.Database.Database [javac] Database.free(rs); [javac] ^ [javac] 1 error BUILD FAILED /usr/local/src/nav/svn/trunk/src/getDeviceData/build.xml:35: Following error occured while executing this line /usr/local/src/nav/svn/trunk/src/getDeviceData/data-plugins/Gwport/build.xml:23: Compile failed; see the compiler error output for details. - odd arne

1 0

No vlan detected for Catalyst 4000 switches running CatOS
by odd.hauge＠hiMolde.no 09 Mai '05

09 Mai '05

Thank you very much. I'm impressed. Keep up the good work. - odd arne ________________________________ From: Kristian Eide [mailto:kreide@gmail.com] Sent: Mon 05/09/05 19:05 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] No vlan detected for Catalyst 4000 switches running CatOS > getDeviceData do not detect vlan for my Cat4000 switches running CatOS > version 8.4.1. This case turned out to be a bit complicated, however, the root cause is that the device reports identical serials for its three modules. I have now added support to getDeviceData for detecting this case, and handling it by ignoring any duplicate serials. Hopefully the VLANs will how up on this device now. -- Kristian

1 0

[Nav-users] Re: No vlan detected for Catalyst 4000 switches running CatOS
by kreide＠gmail.com 09 Mai '05

09 Mai '05

> getDeviceData do not detect vlan for my Cat4000 switches running CatOS > version 8.4.1. This case turned out to be a bit complicated, however, the root cause is that the device reports identical serials for its three modules. I have now added support to getDeviceData for detecting this case, and handling it by ignoring any duplicate serials. Hopefully the VLANs will how up on this device now. -- Kristian

1 0

Forsvunnet dokumentasjon for NAV 2.1.5 (fwd)
by reier.rodland＠usit.uio.no 05 Mai '05

05 Mai '05

Pr?ver en gang til, med godkjent avsender denne gangen... <reierr> ---------- Forwarded message ---------- Date: Thu, 28 Apr 2005 15:08:23 +0200 (CEST) From: Reier Johan R?dland <reierr(a)usit.uio.no> To: nav-users(a)itea.ntnu.no Subject: Forsvunnet dokumentasjon for NAV 2.1.5 Tidliger kom vi til en side med lenker over diverse NAV-dokumentasjon p? http://metanav.ntnu.no/moin.cgi/NAVlinks/ (lenket under overskriften "Om NAV / Andre NAV") N? kommer en til en side som det ser ut til at er under konfigurasjon... Et eller anet med wikis?? Siden vi fremdeles kj?rer 2.1.5, s? hadde det v?rt fin om pekere virket. mvh <reierr>

2 2

Layer 2 traffic map
by TristanRhodes＠weber.edu 21 Apr '05

21 Apr '05

I have been reading the information provided in the screenshots section. It appears that the traffic map is layer 3, and the network explorer is layer 2. Is there a way to graphically view the layer 2 information in network explorer? (Sadly, I have not been able to perform a successful installation of NAV.) Tristan Rhodes >From lex at sandy.ru Wed Apr 20 19:45:52 2005 From: lex at sandy.ru (Alex A. Pavlenko) Date: Wed Apr 20 16:47:30 2005 Subject: [Nav-users] Cannot start Edit Database on NAV under FreeBSD 5 In-Reply-To: <426722C1(a)epostleser.online.no> References: <426722C1(a)epostleser.online.no> Message-ID: <42666B20.2040205(a)sandy.ru> Kristian Eide wrote: >>Looks like ConfigParser.jar is not in the java classpath. But where is >>in the Tomcat classpath modifications can be applied? > > > Copy (or better, symlink) the files into <tomcat-dir>/shared/lib. > Yes!!! It works! Thanks everybody for help!! -- Alex. > -- > Kristian >

2 1

Cannot start Edit Database on NAV under FreeBSD 5
by roar.pettersen＠it.uib.no 20 Apr '05

20 Apr '05

Hello ! > ------------------------------ > java.lang.NoClassDefFoundError: no/ntnu/nav/ConfigParser/ConfigParser > navAdmin.service(navAdmin.java:38) > javax.servlet.http.HttpServlet.service(HttpServlet.java:802) > ------------------------------ > Looks like ConfigParser.jar is not in the java classpath. But where is in the > Tomcat classpath modifications can be applied? > The inclusion of ". /usr/local/nav/bin/navenv.sh" into Tomcat > startup script is absolutely unuseful. What else can I do? It is a good idea to use bash shell and this is my .bash_profile : nav:~# more .bash_profile export PYTHONPATH=/usr/local/nav/lib/python export JAVA_HOME=/usr/local/linux-sun-jdk1.4.2 export PATH=$PATH:/usr/local/nav/bin:/usr/local/linux-sun-jdk1.4.2/bin export PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib export CLASSPATH="`echo /usr/local/nav/lib/java/*.jar | tr ' ' ':'`:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/ja va/classes/snmp.jar" -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kreide at online.no Wed Apr 20 16:39:38 2005 From: kreide at online.no (Kristian Eide) Date: Wed Apr 20 15:39:46 2005 Subject: [Nav-users] Cannot start Edit Database on NAV under FreeBSD 5 Message-ID: <426722C1(a)epostleser.online.no> >Looks like ConfigParser.jar is not in the java classpath. But where is >in the Tomcat classpath modifications can be applied? Copy (or better, symlink) the files into <tomcat-dir>/shared/lib. -- Kristian

1 0

some devicedata are not updated
by kreide＠online.no 01 Apr '05

01 Apr '05

> now it works, but the "CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not > found bla. bla." is still there. Please ignore this message. > The Network explorer is still wrong. I have created an account for ntnu so > you could have a look. Password is the same as on po. Could you elaborate on what exactly is wrong? -- Kristian

1 0

Apache configuration with NAV
by TristanRhodes＠weber.edu 31 Mar '05

31 Mar '05

Morten, Thanks for finding that. I am trying to use that file in SLES. 1. cp /etc/apache2/httpd.conf /etc/apache2/http.conf.save 2. tuxdev:/etc/apache2 # rcapache2 configtest Syntax error on line 14 of /etc/apache2/httpd.conf: ServerRoot must be a valid directory What should "ServerRoot" be set to? I guessed "/usr/share/apache2/". 3. tuxdev:/etc/apache2 # rcapache2 configtest Syntax error on line 226 of /etc/apache2/httpd.conf: Cannot load /usr/share/apache2/modules/mod_python.so into server: /usr/share/apache2/modules/mod_python.so: cannot open shared object file: No such file or directory tuxdev:/etc/apache2 # tuxdev:/etc/apache2 # locate mod_python.so /usr/lib/apache2/mod_python.so A problem loading the python module. Any ideas? Thanks, Tristan Rhodes Weber State University >>> Morten Vold <morten.vold(a)ntnu.no> 03/31/05 1:45 AM >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 29/03/2005 23:46, Tristan RHODES uttered: > I have made some very small changes to the SLES install document. Yes, I've seen it :-) > The section on how to configure Apache is still missing. You mention > that this is documented elsewhere, but I could not find it. Where > can I find information on configuration Apache with NAV? http://svn.nav.ntnu.no/nav/navme/trunk/doc/apache/httpd2.conf.example - I just added a link to the wiki page. > I believe the Debian install comes with a sample Apache config file, > but I am not certain. Maybe - I haven't seen the Debian package, so I don't know whether the maintainer uses the exact example provided in the source tree or if he uses a modified version. - -- Morten Vold NTNU ITEA Integrasjonsgruppen

1 0

Apache configuration with NAV
by morten.vold＠ntnu.no 31 Mar '05

31 Mar '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 29/03/2005 23:46, Tristan RHODES uttered: > I have made some very small changes to the SLES install document. Yes, I've seen it :-) > The section on how to configure Apache is still missing. You mention > that this is documented elsewhere, but I could not find it. Where > can I find information on configuration Apache with NAV? http://svn.nav.ntnu.no/nav/navme/trunk/doc/apache/httpd2.conf.example - I just added a link to the wiki page. > I believe the Debian install comes with a sample Apache config file, > but I am not certain. Maybe - I haven't seen the Debian package, so I don't know whether the maintainer uses the exact example provided in the source tree or if he uses a modified version. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCS7iNXxIl0kpcOkQRAhKoAKDaaXBHRpIgBc7tvv7pVJOes3NOvQCbBzVl epqcDNErxfnjd/TCrwAyTe4= =y5qF -----END PGP SIGNATURE----- >From Borge.Brunes at cc.uit.no Thu Mar 31 14:39:19 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Thu Mar 31 13:39:27 2005 Subject: [Nav-users] some devicedata are not updated In-Reply-To: Message from Kristian Eide <kreide(a)online.no> <200503282326.09563.kreide(a)online.no> Message-ID: <200503311139.j2VBdJKD005581(a)duke.cc.uit.no> kreide(a)online.no said: >> A few days ago I added a new router into NAV. The new one >> was connected to a router already present i NAV. This happend: >> old-router_10 GwportHandler-3-HANDLE SQLException: ERROR: insert or update >> on table "gwportprefix" violates foreign key constraint "$2" > > This is a known problem we are also experiencing here at NTNU. We will have a > fix ready for the next beta. In the mean time a fix for this is to restart > gDD. now it works, but the "CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found bla. bla." is still there. The Network explorer is still wrong. I have created an account for ntnu so you could have a look. Password is the same as on po. regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

some devicedata are not updated
by kreide＠online.no 29 Mar '05

29 Mar '05

> A few days ago I added a new router into NAV. The new one > was connected to a router already present i NAV. This happend: > old-router_10 GwportHandler-3-HANDLE SQLException: ERROR: insert or update > on table "gwportprefix" violates foreign key constraint "$2" This is a known problem we are also experiencing here at NTNU. We will have a fix ready for the next beta. In the mean time a fix for this is to restart gDD. -- Kristian

1 0

BoxDown 0 d, 00 h, 00 min
by kreide＠online.no 19 Mar '05

19 Mar '05

> I get many alert with BoxDown 0 d, 00 h, 00 min > Sysname IP From To Downtime boxState > XXXXX.hivolda.no 158.38.XX.XXX 02:54 18-03-05 02:55 18-03-05 > 0 d, 00 h, 00 min boxDown I believe this is due to some debug code that was unfortunately included in a beta release which sets the default wait time for event engine to a very low (5 seconds) value. You can fix this problem by uncommenting the line in eventEngine.conf which sets the alertTickLength (default is 60 seconds) and restart event engine. Note that there should not be a semicolon at the end of the line, so if there is one remove it. -- Kristian

1 0

Use SNMP::Info to manage device types?
by Vidar.Faltinsen＠uninett.no 19 Mar '05

19 Mar '05

On Mon, 14 Mar 2005, Kristian Eide wrote: >> In my opinion main NAV problem is, that it is not flexible, there is no >> interface for adding custom devices. I was writing about this, but there is >> no feedback. We consider this issue very important. I am sorry you (Woj) received no feedback on your initial posting. > In fact, NAV is meant to be very flexible! New OIDs can be added via the web > interface, and NAV will automatically detect which devices support the new > OIDs. > > Data collection is done by the 'getDeviceData' daemon, which uses a > plugin-based architecture. The API for this is resonably well documented in > Javadoc, however, it is a fact that familiarity with Java programming is > required in order to create new collection plugins. Unfortunately it also > seems many system administrators are much more familiar with script languages > and the barrier to entry is thus high. We should also supply a Device Compatibility Matrix equivalent to the netdisco version (http://snmp-info.sourceforge.net/DeviceMatrix.html) An idea is to adopt a similar/elaborated classification, introduce a wiki page at metanav and have the nav community participate in testing and doumentation. This will be of great value to the community, it will be easy for new users to see what we support, easy for us to see where the current problems are, etc. > Creating a perl binding which focused on easy of development would solve this > problem, but it is of now uncertain if resources are available to implement > something like this. We will discuss it internally and announce any decision > this list. We should give this serious thought. We definitely need a mechansim which invites contributions from the community. I will internally (ntnu/uninett) suggest an intense equipment test program where we test variuos new equipment in a structured manner. In the process we should look at improving logging and in the end provide a cookbook / check list for how to test a new switch/router in NAV. A device can be supported in NAV on different levels: 1: basis: only status monitoring of the device. no information on ports (l2 or l3 ports) 2: information on ports but no vlan information. This also includes cricket/rrd statistics 3: physical topology detected. machine tracker capable 4: full topology: vlan information (trunk and none trunk ports) Variuos log files / web pages should be checked in the process from initial seeding in edit database untill you reach level 4. Worst- and bestcase timeframe should also be dedumentet - Vidar

1 0

Suse Linux Enterprise Server (SLES) 9 install documentation?
by TristanRhodes＠weber.edu 19 Mar '05

19 Mar '05

Morten, Thanks for putting together the NAV installation instructions for SLES. I have a few thoughts.... 1. Are there commands that can be used to install the long-list of Yast packages, or is the GUI required? (I am used to "apt-get install apache") 2. Regarding the manual package installations: Can any of these be installed with Yast? I noticed that IPy is installed manually, and it is in Yast. Is this due to a required version of IPy? (There may be other similar packages like IPy). 3. I have only recently discovered NAV, and I am very thankful for all the work that has been put into it. I am also very pleased that it has been released under the GPL license so that we can use it! Can I ask when NAV 3.0 is expected to be finished? (Q2, Q3, or Q4 2005?) Thanks! Tristan Rhodes Weber State University >>> Morten Vold <morten.vold(a)ntnu.no> 03/15/05 1:07 AM >>> On 11/03/2005 17:35, Tristan RHODES uttered: > "SuSE Linux Enterprise Server > The current NTNU installation of NAV is up and running on SLES 9. > Installation instructions will be made available shortly." Yes, thank you for reminding me (I had forgotten all about this). I will try to put something up by Friday. All testing and suggestions are welcome :-) - -- Morten Vold NTNU ITEA Integrasjonsgruppen

1 0

BoxDown 0 d, 00 h, 00 min
by Vidar.Faltinsen＠uninett.no 18 Mar '05

18 Mar '05

On Fri, 18 Mar 2005, Peder Magne Sefland wrote: > I get many alert with BoxDown 0 d, 00 h, 00 min > > 2005-03-18 > Sysname IP From To Downtime boxState > XXXXX.hivolda.no 158.38.XX.XXX 02:54 18-03-05 02:55 18-03-05 > 0 d, 00 h, 00 min boxDown > > > In nav2 there where somewhere we could put boxes with slow respons, so > you don't get this false alert. Is this possible in nav3? In nav3 you have multiple options here: 1) You can adjust your alert profile to suppress alarms from the netbox in question. This solves the problem for you, not for everybody. You may alse do this suppression based on severity. We have a default severity scheme in place, depending on the box in question this may help you. 2) You can put set the device on maintenance. Use the messages tool, select the maintenance tab. Select the netbox and attach a message to this. This options stops all monitoring of the device for the time period you specify. 3) You may adjust timers in pping and/or event engine, see pping.conf, eventEngine.conf (maybe Kristian can elaborate here). Please note that these adjustments are on a "global" basis. - Vidar

1 0

Suse Linux Enterprise Server (SLES) 9 install documentation?
by morten.vold＠ntnu.no 15 Mar '05

15 Mar '05

GET /favicon.ico HTTP/1.1 Host: 158.38.X.X User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: nav_sessid=745ce9bd41a62b46bbdbaebaf132d02e HTTP/1.x 404 Not Found Date: Tue, 15 Mar 2005 08:42:47 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Content-Length: 299 Connection: close Content-Type: text/html; charset=iso-8859-1 This next log is when I move from the Toolbox to the Syslog Ananlyzer. I first get an error Mod_python error: "PythonHandler main" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/var/www/nav/messages/main.py", line 63, in handler path = req.uri.split(BASEPATH)[1] IndexError: list index out of range If I use the Refresh-button (F5) I might get the right Syslog Analyzer page https://XX.XXX.no/logger/ GET /logger/ HTTP/1.1 Host: XX.XXX.no User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Referer: https://XX.XXX.no/toolbox/ Cookie: nav_sessid=fab322f99c748f4597375dfb180d4e0d HTTP/1.x 200 OK Date: Tue, 15 Mar 2005 09:20:57 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Connection: close Transfer-Encoding: chunked Content-Type: text/html; charset=ISO-8859-1 GET /favicon.ico HTTP/1.1 Host: XX.XXX.no User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: nav_sessid=fab322f99c748f4597375dfb180d4e0d HTTP/1.x 404 Not Found Date: Tue, 15 Mar 2005 09:20:57 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Content-Length: 301 Connection: close Content-Type: text/html; charset=iso-8859-1 GET /logger/ HTTP/1.1 Host: XX.XXX.no User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Referer: https://XX.XXX.no/toolbox/ Cookie: nav_sessid=fab322f99c748f4597375dfb180d4e0d Cache-Control: max-age=0 HTTP/1.x 200 OK Date: Tue, 15 Mar 2005 09:21:14 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Connection: close Transfer-Encoding: chunked Content-Type: text/html; charset=ISO-8859-1 GET /images/main/background-fill.gif HTTP/1.1 Host: XX.XXX.no User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Referer: https://XX.XXX.no/logger/ Cookie: nav_sessid=fab322f99c748f4597375dfb180d4e0d If-Modified-Since: Mon, 14 Feb 2005 08:25:01 GMT If-None-Match: "c1e7-97-62631140" Cache-Control: max-age=0 HTTP/1.x 304 Not Modified Date: Tue, 15 Mar 2005 09:21:14 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Connection: close Etag: "c1e7-97-62631140" GET /images/main/navbar-separator.gif HTTP/1.1 Host: XX.XXX.no User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Referer: https://XX.XXX.no/logger/ Cookie: nav_sessid=fab322f99c748f4597375dfb180d4e0d If-Modified-Since: Mon, 14 Feb 2005 08:25:01 GMT If-None-Match: "c1e9-2b8-62631140" Cache-Control: max-age=0 HTTP/1.x 304 Not Modified Date: Tue, 15 Mar 2005 09:21:14 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Connection: close Etag: "c1e9-2b8-62631140" GET /images/blank.gif HTTP/1.1 Host: XX.XXX.no User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Referer: https://XX.XXX.no/logger/ Cookie: nav_sessid=fab322f99c748f4597375dfb180d4e0d If-Modified-Since: Mon, 14 Feb 2005 08:25:01 GMT If-None-Match: "c1ed-2b-62631140" Cache-Control: max-age=0 HTTP/1.x 304 Not Modified Date: Tue, 15 Mar 2005 09:21:14 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Connection: close Etag: "c1ed-2b-62631140" GET /images/main/navlogo+background.gif HTTP/1.1 Host: XX.XXX.no User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Referer: https://XX.XXX.no/logger/ Cookie: nav_sessid=fab322f99c748f4597375dfb180d4e0d If-Modified-Since: Mon, 14 Feb 2005 08:25:01 GMT If-None-Match: "c1e3-f682-62631140" Cache-Control: max-age=0 HTTP/1.x 304 Not Modified Date: Tue, 15 Mar 2005 09:21:14 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Connection: close Etag: "c1e3-f682-62631140" GET /favicon.ico HTTP/1.1 Host: XX.XXX.no User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: image/png,*/*;q=0.5 Accept-Language: nb,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: nav_sessid=fab322f99c748f4597375dfb180d4e0d HTTP/1.x 404 Not Found Date: Tue, 15 Mar 2005 09:21:14 GMT Server: Apache/2.0.53 (Debian GNU/Linux) Content-Length: 301 Connection: close Content-Type: text/html; charset=iso-8859-1 Peder Sefland >>> Morten Vold <morten.vold(a)ntnu.no> 15.03.2005 09:10:49 >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 14/03/2005 11:26, Peder Magne Sefland uttered: > When I try to add or edit a message, very often I get the > Syslog-page. But if I go back and try again, I might get det right > message-page. I'm not entirely sure what you are describing here, but I believe we've had one other similar report. It doesn't give us much to go on though - I think what would be most helpful is a log of the HTTP headers that are sent and received when this happens. If you use Mozilla Firefox, you can capture the HTTP Headers using the LiveHTTPHeaders plugin (see: http://livehttpheaders.mozdev.org/ ) - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCNpiJXxIl0kpcOkQRAup3AJ9sBvvGBIgmjqKu5n4L2hGVOpWnnwCg7xrq R5LLuhY5bamx+qC4kwPr6Hk= =Byjh -----END PGP SIGNATURE----- >From peder.sefland at hivolda.no Fri Mar 18 09:38:19 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Fri Mar 18 09:38:35 2005 Subject: [Nav-users] BoxDown 0 d, 00 h, 00 min Message-ID: <s23aa196.000(a)HVO-3.hivolda.no> I get many alert with BoxDown 0 d, 00 h, 00 min 2005-03-18 Sysname IP From To Downtime boxState XXXXX.hivolda.no 158.38.XX.XXX 02:54 18-03-05 02:55 18-03-05 0 d, 00 h, 00 min boxDown In nav2 there where somewhere we could put boxes with slow respons, so you don't get this false alert. Is this possible in nav3? Peder Sefland

1 0

snmp timeout when adding a 6509 GSW
by fredrik.holmberg＠luh.hihm.no 14 Mar '05

14 Mar '05

When I add a Catalyst 6509 GSW I get the following errors in getDeviceData.log: .... Mar 14 16:44:22 2005 xxx-gsw_06 OID_TESTER-6-DO_TEST Got results from xxx-gsw, length: 0 (reqGetnext: true, vl: @30) Mar 14 16:44:22 2005 xxx-gsw_06 OID_TESTER-6-DO_TEST Got timeout exception testing oidkey ucd_cpuIdle with netbox: 128.39.xxx.xxx (vl: @1002) .... Mar 14 16:52:22 2005 xxx-gsw_06 OID_TESTER-6-DO_TEST Got results from xxx-gsw, length: 0 (reqGetnext: true, vl: @30) Mar 14 16:52:22 2005 xxx-gsw_06 OID_TESTER-6-DO_TEST Got timeout exception testing oidkey cMenuPortType with netbox: 128.39.xxx.xxx (vl: @1002) .... Mar 14 16:55:23 2005 xxx-gsw_06 OID_TESTER-6-DO_TEST Got results from xxx-gsw, length: 0 (reqGetnext: true, vl: @30) Mar 14 16:55:23 2005 xxx-gsw_06 OID_TESTER-6-DO_TEST Got timeout exception testing oidkey hpHwVer with netbox: 128.39.xxx.xxx (vl: @1002) etc. Any ideas on why these messages occur? Is it because of a misconfiguration on the GSW? Regards, Fredrik Holmberg >From kreide at online.no Mon Mar 14 17:10:14 2005 From: kreide at online.no (Kristian Eide) Date: Mon Mar 14 17:10:17 2005 Subject: [Nav-users] snmp timeout when adding a 6509 GSW Message-ID: <4236C142(a)epostleser.online.no> >When I add a Catalyst 6509 GSW I get the following errors in >getDeviceData.log: >Mar 14 16:44:22 2005 xxx-gsw_06 OID_TESTER-6-DO_TEST Got results from >xxx-gsw, length: 0 (reqGetnext: true, vl: @30) >Mar 14 16:44:22 2005 xxx-gsw_06 OID_TESTER-6-DO_TEST Got timeout >exception testing oidkey ucd_cpuIdle with netbox: 128.39.xxx.xxx (vl: @1002) >Any ideas on why these messages occur? Is it because of a >misconfiguration on the GSW? No. This is normal as the device does not reply to SNMP requests on a VLAN it does not recognize (1002 in this case). Since NAV does not know which VLANs are valid for a given device it will try several, some of which might not be valid, and this can result in the above message. It should be safe to ignore in this case, however. -- Kristian

1 0

Use SNMP::Info to manage device types?
by TristanRhodes＠weber.edu 14 Mar '05

14 Mar '05

I agree Vegard, Netdisco is a neat application. I would love to see the best of both applications combined. Configuration file backup, perhaps even in a versioning system. >>> Vegard Vesterheim <Vegard.Vesterheim(a)uninett.no> 03/14/05 6:22 AM >>> On Mon, 14 Mar 2005 13:35:21 +0100 Magnus Nordseth <magnus(a)ntnu.no> wrote: > Wojciech Kozicki: >> In my opinion main NAV problem is, that it is not flexible, there is no >> interface for adding custom devices. I was writing about this, but there is >> no feedback. > > The SNMP::Info module is probably cool, but as the SNMP handling in NAV is > written in java, it doesn't help us much. I don't know enough details about the NAV database, but I would assume that alternative methods for harvesting SNMP data for insertion into the NAV database would be possible. Wouldn't it? List of devices supported by SNMP::Info: http://snmp-info.sourceforge.net/DeviceMatrix.html BTW, people taking interest in the SNMP::Info package should also be aware of the netdisco application (http://netdisco.org) for which SNMP::Info was created. netdisco is an application similar to NAV in many respects. It is implemented solely in perl, has auto-discovery capabilities, has a full-fledged API for extensions, the main interface is web-based but a command line interface is provided as well. A nifty functionality is layer 2 traceroute which displays switch port details along one possible route between two IP adresses. netdisco also provides a 'Duplex Mismatch Finder'. The web interface in netdisco is more basic, nowhere near as slick as NAV, but I guess some ideas from netdisco could be incorporated into NAV. - Vegard - _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >From kreide at online.no Mon Mar 14 16:16:50 2005 From: kreide at online.no (Kristian Eide) Date: Mon Mar 14 16:16:53 2005 Subject: [Nav-users] Use SNMP::Info to manage device types? Message-ID: <423687E7(a)epostleser.online.no> >I don't know enough details about the NAV database, but I would assume >that alternative methods for harvesting SNMP data for insertion into >the NAV database would be possible. Wouldn't it? Certainly, but we would also need some way to actually interpret the collected data, which is why we have not added more OIDs than those for which we actually have a way to process the data. >command line interface is provided as well. A nifty functionality is >layer 2 traceroute which displays switch port details along one >possible route between two IP adresses. netdisco also provides a We have also implemented this in NAV (a short command line python program, as all the required data is already in the NAV database), in fact, it seems we can do better since we also collect the STP data and thus can see where the data is actually traveling, not just find the shortest path. Making a web version is not much work, perhaps we will include it as well if there is demand. >'Duplex Mismatch Finder'. I think we already have such a report (?). >The web interface in netdisco is more basic, nowhere near as slick as >NAV, but I guess some ideas from netdisco could be incorporated into >NAV. I liked the "network map". Since Netdisco is BSD licenced perhaps this could be integrated into NAV. -- Kristian

1 0

error when accessing cricket..
by roar.pettersen＠it.uib.no 11 Mar '05

11 Mar '05

Hello ! > Mod_python error: "PythonHandler mod_python.publisher" > > Traceback (most recent call last): > > File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in > HandlerDispatch > result = object(req) > > File "/usr/lib/python2.3/site-packages/mod_python/publisher.py", line 98, > in handler > path=[path]) > > File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 454, in > import_module > f, p, d = imp.find_module(parts[i], path) > > ImportError: No module named index You have to make a file called .htaccess, eg : echo "SetHandler none" > .htaccess This should be in a FAQ, very easy to forget. :-) -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From fredrik.holmberg at luh.hihm.no Fri Mar 11 15:05:40 2005 From: fredrik.holmberg at luh.hihm.no (Fredrik Holmberg) Date: Fri Mar 11 15:05:44 2005 Subject: [Nav-users] error when accessing cricket.. In-Reply-To: <Pine.GSO.4.61.0503111449220.20340(a)alf.uib.no> References: <42319FE6.2070506(a)luh.hihm.no> <Pine.GSO.4.61.0503111449220.20340(a)alf.uib.no> Message-ID: <4231A5B4.8080707(a)luh.hihm.no> Creating .htaccess in "public_html" solved the problem. Thanks! - Fredrik Roar Pettersen wrote: > Hello ! > >> Mod_python error: "PythonHandler mod_python.publisher" >> >> Traceback (most recent call last): >> >> File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line >> 299, in HandlerDispatch >> result = object(req) >> >> File "/usr/lib/python2.3/site-packages/mod_python/publisher.py", line >> 98, in handler >> path=[path]) >> >> File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line >> 454, in import_module >> f, p, d = imp.find_module(parts[i], path) >> >> ImportError: No module named index > > > You have to make a file called .htaccess, eg : > > echo "SetHandler none" > .htaccess > > > This should be in a FAQ, very easy to forget. :-) > > > -- > Med vennlig hilsen / Regards; > > Roar Pettersen > Universitetet i Bergen - The University of Bergen > Nygardsgt. 5 - N-5020 BERGEN - Norway > Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 > roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no > >From TristanRhodes at weber.edu Fri Mar 11 09:13:49 2005 From: TristanRhodes at weber.edu (Tristan RHODES) Date: Fri Mar 11 17:12:18 2005 Subject: [Nav-users] Use SNMP::Info to manage device types? Message-ID: <s2316158.051(a)gwmta2.weber.edu> The developer list is closed, so I am would like ask a question to this list. I believe there is a way to manually add device types to NAV, and there is a Wiki page listing many device OIDs. This works, but it may be a duplication of effort. There is a perl module named SNMP::Info that provides an object-oriented interface to Network Devices and data stored in SNMP MIBs. http://snmp-info.sourceforge.net/ If this module could be integrated into NAV, many different network management projects can add devices to this module, and all will benefit from it. Any thoughts on this? Tristan Rhodes >From TristanRhodes at weber.edu Fri Mar 11 09:35:19 2005 From: TristanRhodes at weber.edu (Tristan RHODES) Date: Fri Mar 11 17:33:40 2005 Subject: [Nav-users] Suse Linux Enterprise Server (SLES) 9 install documentation? Message-ID: <s231665d.085(a)gwmta2.weber.edu> I read in the wiki that SLES is used at NTNU and documentation will be available shortly. Is there any way I can help out with this? I can test the install process and make suggestions. http://metanav.ntnu.no/moin.cgi/NAVInstallation "SuSE Linux Enterprise Server The current NTNU installation of NAV is up and running on SLES 9. Installation instructions will be made available shortly." Tristan Rhodes >From peder.sefland at hivolda.no Mon Mar 14 11:26:35 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Mon Mar 14 11:27:07 2005 Subject: [Nav-users] periodic misslink in message-system for nav3 Message-ID: <s2357507.093(a)HVO-3.hivolda.no> When I try to add or edit a message, very often I get the Syslog-page. But if I go back and try again, I might get det right message-page. Peder Sefland >From woj at tstd.pl Mon Mar 14 11:37:27 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Mon Mar 14 11:37:44 2005 Subject: [Nav-users] Use SNMP::Info to manage device types? In-Reply-To: <s2316158.051(a)gwmta2.weber.edu> References: <s2316158.051(a)gwmta2.weber.edu> Message-ID: <200503141137.28354.woj(a)tstd.pl> On Friday 11 of March 2005 17:13, Tristan RHODES wrote: > The developer list is closed, so I am would like ask a question to this > list. > > I believe there is a way to manually add device types to NAV, and there > is a Wiki page listing many device OIDs. This works, but it may be a > duplication of effort. > > There is a perl module named SNMP::Info that provides an > object-oriented interface to Network Devices and data stored in SNMP > MIBs. > > http://snmp-info.sourceforge.net/ > > If this module could be integrated into NAV, many different network > management projects can add devices to this module, and all will benefit > from it. > > Any thoughts on this? > In my opinion main NAV problem is, that it is not flexible, there is no interface for adding custom devices. I was writing about this, but there is no feedback. Tristan's idea is very good. regards. -- Wojciech (Woj) Kozicki >From magnus at ntnu.no Mon Mar 14 13:35:21 2005 From: magnus at ntnu.no (Magnus Nordseth) Date: Mon Mar 14 13:35:24 2005 Subject: [Nav-users] Use SNMP::Info to manage device types? In-Reply-To: <200503141137.28354.woj(a)tstd.pl> References: <s2316158.051(a)gwmta2.weber.edu> <200503141137.28354.woj(a)tstd.pl> Message-ID: <20050314123521.GC12721(a)stud.ntnu.no> Wojciech Kozicki: > In my opinion main NAV problem is, that it is not flexible, there is no > interface for adding custom devices. I was writing about this, but there is > no feedback. The SNMP::Info module is probably cool, but as the SNMP handling in NAV is written in java, it doesn't help us much. You can add support for device foo in NAV by writing a device handler in getDeviceData subsystem, which shouldn't be too difficult, I suggest using one of the existing handlers as a starting point. Best regards, -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc >From Vegard.Vesterheim at uninett.no Mon Mar 14 14:22:48 2005 From: Vegard.Vesterheim at uninett.no (Vegard Vesterheim) Date: Mon Mar 14 14:22:53 2005 Subject: [Nav-users] Use SNMP::Info to manage device types? In-Reply-To: <20050314123521.GC12721(a)stud.ntnu.no> (Magnus Nordseth's message of "Mon, 14 Mar 2005 13:35:21 +0100") References: <s2316158.051(a)gwmta2.weber.edu> <200503141137.28354.woj(a)tstd.pl> <20050314123521.GC12721(a)stud.ntnu.no> Message-ID: <tkvf7u745z.fsf(a)voll.uninett.no> On Mon, 14 Mar 2005 13:35:21 +0100 Magnus Nordseth <magnus(a)ntnu.no> wrote: > Wojciech Kozicki: >> In my opinion main NAV problem is, that it is not flexible, there is no >> interface for adding custom devices. I was writing about this, but there is >> no feedback. > > The SNMP::Info module is probably cool, but as the SNMP handling in NAV is > written in java, it doesn't help us much. I don't know enough details about the NAV database, but I would assume that alternative methods for harvesting SNMP data for insertion into the NAV database would be possible. Wouldn't it? List of devices supported by SNMP::Info: http://snmp-info.sourceforge.net/DeviceMatrix.html BTW, people taking interest in the SNMP::Info package should also be aware of the netdisco application (http://netdisco.org) for which SNMP::Info was created. netdisco is an application similar to NAV in many respects. It is implemented solely in perl, has auto-discovery capabilities, has a full-fledged API for extensions, the main interface is web-based but a command line interface is provided as well. A nifty functionality is layer 2 traceroute which displays switch port details along one possible route between two IP adresses. netdisco also provides a 'Duplex Mismatch Finder'. The web interface in netdisco is more basic, nowhere near as slick as NAV, but I guess some ideas from netdisco could be incorporated into NAV. - Vegard - >From fredrik.holmberg at luh.hihm.no Mon Mar 14 15:40:38 2005 From: fredrik.holmberg at luh.hihm.no (Fredrik Holmberg) Date: Mon Mar 14 15:43:54 2005 Subject: [Nav-users] " ... violates foreign key constraint "$1" Message-ID: <4235A266.7030309(a)luh.hihm.no> Keep getting these messages in getDeviceData.log: Mar 14 15:21:37 2005 xxx-gw.uninett.no_01 GwportHandler-6-NEW GWPORTPREFIX Gwportprefix: gwip=128.39.xxx.xxx hsrp=false prefix=128.39.xxx.xxx/32 (0) (e1ca74) Mar 14 15:21:37 2005 xxx-gw.uninett.no_01 GwportHandler-3-HANDLE SQLException: ERROR: insert or update on table "gwportprefix" violates foreign key constraint "$1" Does anyone know of a way to fix this, or doesn't it have any particular effect on NAV3 (beta 10)? - Fredrik Holmberg >From kreide at online.no Mon Mar 14 16:02:01 2005 From: kreide at online.no (Kristian Eide) Date: Mon Mar 14 16:02:09 2005 Subject: [Nav-users] Use SNMP::Info to manage device types? Message-ID: <42367F67(a)epostleser.online.no> >In my opinion main NAV problem is, that it is not flexible, there is no >interface for adding custom devices. I was writing about this, but there is >no feedback. In fact, NAV is meant to be very flexible! New OIDs can be added via the web interface, and NAV will automatically detect which devices support the new OIDs. Data collection is done by the 'getDeviceData' daemon, which uses a plugin-based architecture. The API for this is resonably well documented in Javadoc, however, it is a fact that familiarity with Java programming is required in order to create new collection plugins. Unfortunately it also seems many system administrators are much more familiar with script languages and the barrier to entry is thus high. Creating a perl binding which focused on easy of development would solve this problem, but it is of now uncertain if resources are available to implement something like this. We will discuss it internally and announce any decision this list. -- Kristian

1 0

brake-up Advanced Search web-page
by morten.vold＠ntnu.no 09 Mar '05

09 Mar '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 07/03/2005 13:38, Vidar Faltinsen uttered: > I consider this a bug in the report system, where the advanced page > looks very messy in variuos browsers and make it hard to use. > Probably an easy fix... Morten? Until I tried viewing the page using Internet Explorer, I didn't understand what the fuss was about. Upon closer examination, it looks like the report template outputs very bad and broken HTML, which I have now attempted to mend (save for the other bad HTML produced by the MainTemplate, which was not the problem here). Apparently, Firefox is more forgiving when attempting to render bad HTML than Internet Explorer is. The fix will be available in the next release (or from r3163 on trunk for those who like to use the bleeding edge from the Subversion repository). - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCLvY4XxIl0kpcOkQRAsZuAKDcdxabCX9IxUkhIGAGdPLrYE5UTQCeO7n3 7CkVNhcT/8oswPWDNGmHIvg= =cc6i -----END PGP SIGNATURE----- >From fredrik.holmberg at luh.hihm.no Fri Mar 11 14:40:54 2005 From: fredrik.holmberg at luh.hihm.no (Fredrik Holmberg) Date: Fri Mar 11 14:40:57 2005 Subject: [Nav-users] error when accessing cricket.. Message-ID: <42319FE6.2070506(a)luh.hihm.no> After erasing old Cricket data, when I access https://nav/cricket/ the following message appears: --- Mod_python error: "PythonHandler mod_python.publisher" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/lib/python2.3/site-packages/mod_python/publisher.py", line 98, in handler path=[path]) File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 454, in import_module f, p, d = imp.find_module(parts[i], path) ImportError: No module named index --- navcron@nav3:~/cricket> ll total 1 lrwxrwxrwx 1 root root 16 2004-10-24 18:48 cricket -> ../cricket-1.0.5 drwxr-xr-x 9 navcron nav 352 2005-03-11 14:29 cricket-config drwxr-xr-x 7 navcron nav 224 2005-03-11 13:35 cricket-data drwxr-xr-x 2 navcron nav 1368 2005-03-11 14:34 cricket-logs drwxr-xr-x 2 navcron nav 312 2005-03-11 14:21 public_html navcron@nav3:~/cricket/public_html> ll total 4 lrwxrwxrwx 1 navcron nav 37 2005-03-11 14:21 cricket-config -> /usr/local/nav/cricket/cricket-config -rw-r--r-- 1 navcron nav 569 2005-03-11 12:04 cricket.css lrwxrwxrwx 1 navcron nav 35 2005-03-11 14:21 cricket-data -> /usr/local/nav/cricket/cricket-data lrwxrwxrwx 1 navcron nav 22 2005-03-11 14:17 grapher.cgi -> .../cricket/grapher.cgi lrwxrwxrwx 1 navcron nav 17 2005-03-11 14:17 images -> ../cricket/images lrwxrwxrwx 1 navcron nav 11 2005-03-11 14:18 index.cgi -> grapher.cgi lrwxrwxrwx 1 navcron nav 14 2005-03-11 14:17 lib -> ../cricket/lib lrwxrwxrwx 1 navcron nav 25 2005-03-11 14:17 mini-graph.cgi -> .../cricket/mini-graph.cgi lrwxrwxrwx 1 navcron nav 18 2005-03-11 14:17 VERSION -> ../cricket/VERSION What have I done wrong this time? :) Regards, Fredrik Holmberg >From Borge.Brunes at cc.uit.no Fri Mar 11 14:41:10 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Fri Mar 11 14:41:14 2005 Subject: [Nav-users] Problem with case sensitive hostname/sysname Message-ID: <200503111341.j2BDfA1d004639(a)duke.cc.uit.no> An old problem from The Beginning is back: eventEngine EVENTQ_MONITOR_TASK-6-RUN Got event: e=4153 d=108 n=32 t=info s=x [dnsname=piffi.cc.uit.no] [sysname=PIFFI] [alerttype=dnsMismatch] alertEngine User-6-sendSMS: SMS XXXX: piffi.cc.uit.no does not match piffi.cc.uit.no (This is an M$-box and there is no easy way tho change the sysname) regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

SV: RE: [Nav-users] vlan information from cisco switches
by peder.sefland＠hivolda.no 07 Mar '05

07 Mar '05

My guess is that vlandiscovery is not running, or has a bug that effect you. Check: 1. is the requested information in the swportvlan table (probably not) correct, no information 2. does "nav status" tell you that Networkdiscovery is running Yes, everything is running (hopefully) ~# /etc/init.d/nav status networkDiscovery: Up cricket: Up eventEngine (pid 875) is running... iptrace: Up maintengine: Up servicemon.py (pid 895) is running... smsd.pl (pid 904) is running... thresholdMon: Up mactrace: Up logengine: Up safe_smsd: Up getDeviceData (pid 910) is running... backup: Up pping.py (pid 922) is running... Alertengine is running with process id 935. It has been running for 10 hours and 46 minutes. 3. is networkDiscovery-stderr.log updated reasently? does it give you a clue? The networkDiscovery-stderr.log is emty. One of the other on the nav-users-list has a cisco 2980 running software 6.3(10) and don't have this problem. My cisco 2980 is running software 6.3(5), so maybe a software upgrade will do the trick? Peder >From Borge.Brunes at cc.uit.no Tue Mar 8 15:25:32 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Tue Mar 8 15:25:37 2005 Subject: [Nav-users] more problems with the logger subsystem Message-ID: <200503081425.j28EPWt8052853(a)duke.cc.uit.no> The logengine is "leaking" connections until postgres says "connection limit exceeded for non superusers": postgres[87954]: [2-1] FATAL: connection limit exceeded for non-superusers I'm not a pythonexpert, but I guess that somewhere in the logengine.py-code a connection is opened and not closed. regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

SV: Re: [Nav-users] brake-up Advanced Search web-page
by peder.sefland＠hivolda.no 07 Mar '05

07 Mar '05

This is also a good idea. Searching for portnames is an often used feature! Be aware however that NAV is competing with itself in this matter; another tool, Network Exlorer gives you the ability to search for portnames. Maybe this will be of help? - Vidar My Network Explorer works fine with all the switches that is in the same vtp-domain as my Cisco 6509(GSW). But I can't browse/search on switches that is in another vtp-domian. And swtiches on our studentshome are in a different vtp-domain. With the Advanced Search in the report it is possible to do this portname-search. Peder

1 0

External authentication in NAV
by Vegard.Vesterheim＠uninett.no 07 Mar '05

07 Mar '05

On Fri, 4 Mar 2005 14:30:32 +0100 Bjorn Ove Grotan <bjorn.grotan(a)itea.ntnu.no> wrote: > Vegard Vesterheim: >> Are there any possibilities to use an external authentication >> mechanism in NAV. In UNINETT, we are looking at so-called >> single-sign-on solutions for web applications. In our setup, the >> authentication process can be performed by the web server, not by the >> web applications. We have implemented this by hooking custom >> authentication methods into the Apache request cycle. > > Authentication is handled by subsystem/webFront/lib/nav/web/auth.py > and likewize with authorization: subsystem/lib-python/src/nav/auth.py > The authenticationmodule is initiated from > subsystem/webFront/lib/nav/web/__init__.py in function > headerparserhandler. > > There's a file ldapAuth.py for example on how to use ldap as external > source of authentication. We used this internally for testing for a > while, but had to let it go because of broken openssl/openldap in > RedHat Linux. Hmm, either I am misunderstanding your response, or you misunderstood my question. I would like to implement 'single-sign-on' (log in once, get access to several services), but you talk about a 'shared userdatabase', this is not the same thing. You say that one can have alternative authentication mechanisms *within* NAV, this is nice, but I don't want that. I would like for NAV to *not do authentication at all*, but instead rely on 'higher powers' (in my case: Apache) to do this. In principle this would imply skipping the local authentication handling in NAV altogether. Apache does the authentication part, and NAV picks up the authenticated username and just does the authorization. > > I don't remember the specifics anymore, but I think we added some > functionality to first try ldap, then local database if ldapAuth was > used.. maybe someone else can comment on this? Well, a kind of fallback mechanism with a local userdatabase in NAV could be useful. For instance if the central login-service is unavailable, a local emergency fallback could be helpful. > >> I realize that in order for authorization to be performed correctly, >> the user must probably be registered in NAV as well, but this is >> another issue altogether. My main interest is avoiding the extra >> username/password dialog in NAV. > > The NAV userdatabase using ldapAuth mentioned above, also has a means > for describing where the source of this user credentials come from, so > you can have - say all your organization in ldap where they update their > passwords in ldap - and store external users and testusers inside the > NAV database. > >> In case anyone is wondering about relations with the FEIDE project: >> This is only partly related to FEIDE, the issue should be of >> general interest. > > I was thinking of making python-bindings to Moria, but I haven't had the > time yet. Not mainly for this system, but for similar use. OK, this is a different matter altogether, but we have done some very preliminary experimentation with this. We have been able to talk to Moria services via Python SOAP modules. Let me know if this is of any interest to you. But again, I am not asking how to *add* functionality to NAV, rather I am asking how to *remove* functionality so that one could use a single-sign-on solution. - Vegard - >From odd.hauge at himolde.no Mon Mar 7 10:16:49 2005 From: odd.hauge at himolde.no (Odd Arne Hauge (HSM)) Date: Mon Mar 7 10:16:54 2005 Subject: [Nav-users] Cricket and interface description for giga-router-interfaces, and some problems with HP 5308 switches References: <20050222104551.H42633(a)duke.cc.uit.no> <200502230126.54149.kreide(a)online.no> Message-ID: <011101c522f6$65073ec0$9601a8c0(a)molde.bravida.no> Hi. Getting the description for giga-router-interfaces in cricket: # diff /usr/local/nav/cricket/cricket-config/giga-router-interfaces/.nav /usr/local/src/nav/nav-3.0_beta10/subsystem/statTools/cricket/cricket-config/giga-router-interfaces/.nav 15c15 < descr = select nettype,netident from gwportprefix left join prefix using (prefixid) left join vlan using (vlanid) where gwportid=$id and netident is not null --- > descr = select nettype,netident from gwport left join prefix using > (prefixid) left join vlan using (vlan) where gwportid=$id and netident is > not null I'm also having some problems with HP5308XL Switches. This is a layer 3 switch, but it seems like Nav is unable to detecet the router-interfaces for the box and the vlans. Another minor issue is in the report. When you select Core Switches the report lists all the switches, also the switches defined as GSW type. But when you select the report Core Switch Ports no switch ports from boxes defined as GSW are listed. Regards Odd Arne Hauge

2 2

Problem with logger (syslog analyzer)
by Borge.Brunes＠cc.uit.no 04 Mar '05

04 Mar '05

Folks, In 6 out of 10 times when I try to "Send" something I get: Mod_python error: "PythonHandler main" Traceback (most recent call last): File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/messages/main.py", line 63, in handler path = req.uri.split(BASEPATH)[1] IndexError: list index out of range I also get some of these from logengine.py (cron): Traceback (most recent call last): File "/usr/local/nav/bin/logengine.py", line 273, in ? message = createMessage(line) File "/usr/local/nav/bin/logengine.py", line 105, in createMessage oritime = DateTime.DateTime(year,month,day,hour,min) TypeError: an integer is required but there are no "parsing errors" in the webgui. regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

brake-up Advanced Search web-page
by peder.sefland＠hivolda.no 04 Mar '05

04 Mar '05

We have put description on many of our swichports, and we want to search on portname. The only way to do this (so fare I can see) is to go to Home > Report > Switchports and then click on the Advance Search. But on this page you'll have to scrool sideways pretty long before you find the portname-field I know we can customize our Navigation preferences, but it would be better to brake-up this page The best thing would be a field-search in the /report -page Something like this maybe Reports IP Device Center Room search Device search Switchports w/vlan Portname Thats only a suggestion Peder Sefland >From Vegard.Vesterheim at uninett.no Fri Mar 4 13:29:24 2005 From: Vegard.Vesterheim at uninett.no (Vegard Vesterheim) Date: Fri Mar 4 13:29:31 2005 Subject: [Nav-users] External authentication in NAV Message-ID: <tkvf87iogr.fsf(a)voll.uninett.no> Are there any possibilities to use an external authentication mechanism in NAV. In UNINETT, we are looking at so-called single-sign-on solutions for web applications. In our setup, the authentication process can be performed by the web server, not by the web applications. We have implemented this by hooking custom authentication methods into the Apache request cycle. So, in principle it should be sufficient for NAV to lookup the authenticated username from the Apache request record, and use that as a indication of successfull authentication. The NAV webfrontend should be able to go like this: "oh, I see that the user is already authenticated, so I'll just let him in". I realize that in order for authorization to be performed correctly, the user must probably be registered in NAV as well, but this is another issue altogether. My main interest is avoiding the extra username/password dialog in NAV. In case anyone is wondering about relations with the FEIDE project: This is only partly related to FEIDE, the issue should be of general interest. -- Vegard Vesterheim : Phone: +47 73 55 79 12 UNINETT : Fax: +47 73 55 79 01 N-7465 Trondheim, NORWAY : Email: Vegard.Vesterheim(a)uninett.no >From bjorn.grotan at itea.ntnu.no Fri Mar 4 14:30:32 2005 From: bjorn.grotan at itea.ntnu.no (Bjorn Ove Grotan) Date: Fri Mar 4 14:30:33 2005 Subject: [Nav-users] External authentication in NAV In-Reply-To: <tkvf87iogr.fsf(a)voll.uninett.no> References: <tkvf87iogr.fsf(a)voll.uninett.no> Message-ID: <20050304133031.GA10959(a)itea.ntnu.no> Vegard Vesterheim: > Are there any possibilities to use an external authentication > mechanism in NAV. In UNINETT, we are looking at so-called > single-sign-on solutions for web applications. In our setup, the > authentication process can be performed by the web server, not by the > web applications. We have implemented this by hooking custom > authentication methods into the Apache request cycle. Authentication is handled by subsystem/webFront/lib/nav/web/auth.py and likewize with authorization: subsystem/lib-python/src/nav/auth.py The authenticationmodule is initiated from subsystem/webFront/lib/nav/web/__init__.py in function headerparserhandler. There's a file ldapAuth.py for example on how to use ldap as external source of authentication. We used this internally for testing for a while, but had to let it go because of broken openssl/openldap in RedHat Linux. I don't remember the specifics anymore, but I think we added some functionality to first try ldap, then local database if ldapAuth was used.. maybe someone else can comment on this? > I realize that in order for authorization to be performed correctly, > the user must probably be registered in NAV as well, but this is > another issue altogether. My main interest is avoiding the extra > username/password dialog in NAV. The NAV userdatabase using ldapAuth mentioned above, also has a means for describing where the source of this user credentials come from, so you can have - say all your organization in ldap where they update their passwords in ldap - and store external users and testusers inside the NAV database. > In case anyone is wondering about relations with the FEIDE project: > This is only partly related to FEIDE, the issue should be of > general interest. I was thinking of making python-bindings to Moria, but I haven't had the time yet. Not mainly for this system, but for similar use. -- Best regards Bj?rn Ove Gr?tan NTNU, ITEA >From bjorn.grotan at itea.ntnu.no Fri Mar 4 14:42:45 2005 From: bjorn.grotan at itea.ntnu.no (Bjorn Ove Grotan) Date: Fri Mar 4 14:42:47 2005 Subject: [Nav-users] External authentication in NAV In-Reply-To: <20050304133031.GA10959(a)itea.ntnu.no> References: <tkvf87iogr.fsf(a)voll.uninett.no> <20050304133031.GA10959(a)itea.ntnu.no> Message-ID: <20050304134245.GB10959(a)itea.ntnu.no> Bjorn Ove Grotan: > There's a file ldapAuth.py for example on how to use ldap as external > source of authentication. We used this internally for testing for a > while, but had to let it go because of broken openssl/openldap in > RedHat Linux. I stand corrected.. we didn't throw ldap-authenticaion away or anything - it just didn't work with the standard openssl/openldap packages in RedHat 9, but its working with a current setup using SLES9. One of the reasons we let NAV do the external authentication on behalf of the user is because we have to cache credentials in NAV, if the external source of authentication is unavailable. -- Best regards Bj?rn Ove Gr?tan NTNU, ITEA >From valsbox at gmail.com Fri Mar 4 08:05:03 2005 From: valsbox at gmail.com (Valentin Miculit) Date: Fri Mar 4 15:05:17 2005 Subject: [Nav-users] install Message-ID: <2e5d75ca050304060554d9bff6(a)mail.gmail.com> Hi everyone, I am new to Nav. just installed on a FreeBSD Machine 5.3 Got Python and Php to work with apache2 but when i want to run the py line in /nav here is what i get: Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 454, in import_module f, p, d = imp.find_module(parts[i], path) ImportError: No module named nav Any help welcome. What am i missing? Thanx. >From Borge.Brunes at cc.uit.no Fri Mar 4 15:26:20 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Fri Mar 4 15:26:32 2005 Subject: [Nav-users] install In-Reply-To: Message from Valentin Miculit <valsbox(a)gmail.com> <2e5d75ca050304060554d9bff6(a)mail.gmail.com> Message-ID: <200503041426.j24EQKEf000984(a)duke.cc.uit.no> valsbox(a)gmail.com said: [cut] > ImportError: No module named nav Is your PYTHONPATH correct? I use PYTHONPATH=/usr/local/nav/lib/python in 5.3 and it works. BTW: Have you innstalled NAV from ports? regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

SV: RE: [Nav-users] vlan information from cisco switches
by peder.sefland＠hivolda.no 03 Mar '05

03 Mar '05

In my nav3beta10 (debian) every switch shows vlan information on ports, except on my two cisco 2980. model descr serial sw_ver hw_ver fw_ver WS-X2980GBRJ WS-X2980RJ 10/100BaseTx Ethernet Rev. 2.0 JAB05250BZH 5.5(18) 2.0 5.4(1) model descr serial sw_ver hw_ver fw_ver WS-X2980GBRJ WS-X2980GBRJ 10/100/1000 Ethernet Rev. 1.2 JAB061906WQ 6.3(5) 1.2 6.1(4) They are running CatOS, but my 5500 is also running CatOS and he is showing vlan information. This is the information from the web-page /report/swport?b1.netboxid=38 interface module port link Mbps duplex media trunk vlan portname 2/17 2 17 y 100.0 h 0 UPS-Strom snmp But the vlan information is collected, and I can find it tabell swport swportid | moduleid | ifindex | port | interface | link | speed | duplex | media | vlan | trunk | portname | to_netboxid | to_swportid ----------+----------+---------+------+-----------+------+-------+--------+-------+------+-------+----------------+-------------+------------- 12069 | 824 | 25 | 17 | 2/17 | y | 100 | h | | 10 | f | UPS-Strom snmp | | Any ideas? Peder Sefland >>> "Fredrik Holmberg" <fredrik.holmberg(a)luh.hihm.no> 15.02.2005 10:17:54 >>> NAV Beta 10: nav3:/usr/local/nav/etc/report # diff report.conf report.conf.old 432c432 < $sql="SELECT b1.sysname,s1.interface, m1.module, s1.port, s1.link, s1.speed, s1.duplex, s1.media, s1.trunk, vlan.vlan,s1.portname, b2.sysname as to_netboxid,m2.module AS remote_module, s1.swportid, b1.netboxid as netboxid, b1.catid FROM swport AS s1 JOIN module AS m1 USING (moduleid) JOIN netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON (s1.swportid=swportvlan.swportid AND trunk='f') left join vlan using(vlan) LEFT JOIN swport AS s2 ON (s1.to_swportid=s2.swportid) LEFT JOIN module AS m2 ON (s2.moduleid=m2.moduleid)"; --- > $sql="SELECT b1.sysname,s1.interface, m1.module, s1.port, s1.link, s1.speed, s1.duplex, s1.media, s1.trunk, vlan.vlan,s1.portname, b2.sysname as to_netboxid,m2.module AS remote_module, s1.swportid, b1.netboxid as netboxid, b1.catid FROM swport AS s1 JOIN module AS m1 USING (moduleid) JOIN netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON (s1.swportid=swportvlan.swportid AND trunk='f') left join vlan using(vlanid) LEFT JOIN swport AS s2 ON (s1.to_swportid=s2.swportid) LEFT JOIN module AS m2 ON (s2.moduleid=m2.moduleid)"; Maybe this sorts it out :) - Fredrik -----Original Message----- From: nav-users-bounces(a)itea.ntnu.no [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Wojciech Kozicki Sent: Tuesday, February 15, 2005 10:09 AM To: nav-users(a)desperados.itea.ntnu.no Subject: Re: [Nav-users] vlan information from cisco switches Dnia wtorek, 15 lutego 2005 10:03, Fredrik Holmberg napisa*: > Are you referring to "Report"? > It doesn't show VLAN when you view the switchports? > Yes, I meant "report"... > If this is the case, I might have a "fix" for you.. :) best regards -- Wojciech (Woj) Kozicki _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

Several problems in beta10
by Borge.Brunes＠cc.uit.no 01 Mar '05

01 Mar '05

kreide(a)online.no said: >> Network explorer: >> I'm not able to browse some part of the tree. If i use >> the Device browser it's there. > > Can you give an example so I can debug this? Network explorer always starts > from the top and explores downward, thus the complete topology needs to be > present. Some missing topology is probably what is causing this problem. Seems that after I upgraded the switch browsing are working OK....but If I do a "Search in field IP" I got no hit. If I do the same search with "sysName" it works. >> Device browser: >> On some switches it don't show any info (all ports are "white") > > Example? Same solution as above: After an upgrade things are OK. Some more: Network discovery report (var/log/networkDiscovery/networkDiscovery-topology.html): (where do I find this report in the web-gui?) Some problem with the link between all(?) the routers eg: <font color="red">ERROR:</font> Could not find record for other side of link! boks(31): <b>asgvn-gsw.infra.uit.no</b> Ifindex: <b>10101</b> boksBak: <b>holt-gsw.infra.uit.no</b><br> <font color="red">ERROR:</font> Could not find record for other side of link! boks(47): <b>mort-gsw.infra.uit.no</b> Ifindex: <b>10101</b> boksBak: <b>munin-gw.infra.uit.no</b><br> This problem is also present in NAV v2. gDD: On the 3550 and 3750 a lot of these are found in the gDD-log: CGW_DEVHANDLER-4-CGW_MATCH-MODULE Module 0 does not exist on netbox beiva-gsw.infra.uit.no, default to 1 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Module 0 does not exist on netbox beiva-gsw.infra.uit.no, default to 1 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Loopback0 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan167 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan202 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan203 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan204 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan221 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan703 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan805 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan848 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan94 After moving a IP-net from one SVI to another: SQLException for update statement: INSERT INTO gwportprefix (gwportid,prefixid,gwip,hsrp) VALUES ('545','278','129.242.240.1','f') org.postgresql.util.PSQLException: ERROR: insert or update on table "gwportprefix" violates foreign key constraint "$2" regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

cricket problem
by peder.sefland＠hivolda.no 01 Mar '05

01 Mar '05

I have nav3Beta10 (debian) up and running. But the cricket won't show anything execpt Name Description giga-router-interfaces Graphs for giga-router-interfaces giga-switch-ports Graphs for giga-switch-ports router-interfaces Graphs for router-interfaces routers Graphs for routers servers Graphs for servers switch-ports Graphs for switch-ports switches Graphs for switches When I click on any of these links, nothing comes up. Cricket is running, # /etc/init.d/nav status networkDiscovery: Up cricket: Up eventEngine (pid 875) is running... iptrace: Up maintengine: Up servicemon.py (pid 887) is running... smsd.pl (pid 903) is running... thresholdMon: Up mactrace: Up logengine: Up safe_smsd: Up getDeviceData (pid 909) is running... backup: Up pping.py (pid 918) is running... Alertengine is running with process id 932. It has been running for 3 hours and 7 minutes. And I can see that cricket is collecting data. /var/lib/nav/rrd/volda-berte-spraaklab-sw.hivolda.no.rrd /var/lib/nav/rrd/volda-berte-sw2.hivolda.no.rrd /var/lib/nav/rrd/volda-berte-sw3.hivolda.no.rrd /var/lib/nav/rrd/volda-berte-sw4.hivolda.no.rrd /var/lib/nav/rrd/volda-berte-sw5.hivolda.no.rrd ........................ I follow the instructions for installation in the README.Debian Any suggestion what could be wrong? Peder Sefland

1 0

SV: [Nav-users] problem with Syslog Analyzer
by peder.sefland＠hivolda.no 22 Feb '05

22 Feb '05

I'm also looking forward to a solution on this. I have config all my cisco-devices to send syslog to nav3. Peder Sefland >>> Wojciech Kozicki <woj(a)tstd.pl> 22.02.2005 11:06:50 >>> Hi, I am using Syslog Analyzer from NAV. I have /var/log/cisco.log file, where all logs from my cisco stuff are collected. Nav has got +w permission on that file. tail -f /var/log/cisco.log gives me all communicates. Afer while file is truncated - I think that NAV process gets to it. But - in NAV Syslog Analyzer I can see only few communicates, or no communicates. What should I check? best regards. -- Wojciech (Woj) Kozicki _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >From kreide at online.no Wed Feb 23 01:26:49 2005 From: kreide at online.no (Kristian Eide) Date: Wed Feb 23 01:27:01 2005 Subject: [Nav-users] Several problems in beta10 In-Reply-To: <20050222104551.H42633(a)duke.cc.uit.no> References: <20050222104551.H42633(a)duke.cc.uit.no> Message-ID: <200502230126.54149.kreide(a)online.no> Skipped content of type multipart/mixed

1 0

Several problems in beta10
by Borge.Brunes＠cc.uit.no 22 Feb '05

22 Feb '05

getDeviceData: Having a cachingproblem? 01) a switch (3550-12G) running IOS v12.1 in NAV 02) the switch is removed from NAV. (getDeviceData UPDATE_DATA-5-UPDATE_NETBOXES 1 removed) 03) The switch is uppgraded to eg. IOS v12.2 something 04) inserted into NAV again. 05) the gDD collects info, but it says that the switch is still running IOS v12.1 The same happends when the switch is not removed/inserted More gDD-stuff: SQLException for update statement: INSERT INTO gwportprefix (gwportid,prefixid,gwip,hsrp) VALUES ('315','179','129.242.84.1','f') org.postgresql.util.PSQLException: ERROR: insert or update on table "gwportprefix" violates foreign key constraint "$1" alertengine(?): One box is down. The email is sent, but no sms (even if the smsd.log said it have been). The gammu-log is also emty. I'm able to send sms with the navcron user using gammu from the shell. Network explorer: I'm not able to browse some part of the tree. If i use the Device browser it's there. Device browser: On some switches it don't show any info (all ports are "white") regards, -- B?rge Brunes Running NAV on FreeBSD >From woj at tstd.pl Tue Feb 22 11:06:50 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Feb 22 11:07:28 2005 Subject: [Nav-users] problem with Syslog Analyzer Message-ID: <200502221106.50315.woj(a)tstd.pl> Hi, I am using Syslog Analyzer from NAV. I have /var/log/cisco.log file, where all logs from my cisco stuff are collected. Nav has got +w permission on that file. tail -f /var/log/cisco.log gives me all communicates. Afer while file is truncated - I think that NAV process gets to it. But - in NAV Syslog Analyzer I can see only few communicates, or no communicates. What should I check? best regards. -- Wojciech (Woj) Kozicki >From peder.sefland at hivolda.no Tue Feb 22 11:43:12 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Tue Feb 22 11:43:22 2005 Subject: SV: [Nav-users] Several problems in beta10 Message-ID: <s21b1ad5.062(a)HVO-3.hivolda.no> alertengine(?): One box is down. The email is sent, but no sms (even if the smsd.log said it have been). The gammu-log is also emty. I'm able to send sms with the navcron user using gammu from the shell. I have experience something like this, when we wanted to make our own scripts with gammu. We where able to execute the script from shell, but not from a cron-job. The solution was given me from Bergen University. Gammu needed an exit or end code "\x04" When I added echo "\x04" into the TEXT that was going to gammu, it worked. But maybe this is something different. Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.)

1 0

problems with getDeviceData (beta10)
by Ketil.Forselv＠hin.no 21 Feb '05

21 Feb '05

Hi I have a similar problem with our Catalyst 6509, and this is the main problem for me to get Nav3 Beta 10 function satisfactorily. Regards Ketil Susegg, Jan said: > > I have some problems with getDeviceData. It stops collecting/deletes GWP > data on some routers after getBoksMacs.sh has run. If I restart > getDeviceData it works ok for a new hour until getBoksMacs.sh runs again. > Running beta10. > > Feb 17 09:20:55 2005 xxxx-gw.uninett.no_13 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match > module pattern to if: Loopback0 > Feb 17 09:20:55 2005 xxxx-gw.uninett.no_13 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE No module match from interf, defaulting > to module 0 > Feb 17 09:20:55 2005 xxxx-gw.uninett.no_13 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match > module pattern to if: Loopback1 > Feb 17 09:20:55 2005 xxxx-gw.uninett.no_13 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE No module match from interf, defaulting > to module 0 > > > Feb 17 09:21:21 2005 xxxxxx-gsw.hint.no_09 GwportHandler-3-HANDLE > SQLException: ERROR: $2 referential integrity violation - key referenced > from gwportpre > fix not found in prefix > Feb 17 09:29:16 2005 xxxxxx-gsw.hint.no_02 ServerPlugin-6-canHandleDevice > We cannot serve xxxxxx-gsw.hint.no > > Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match > module pattern to if: Vlan10 > Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match > module pattern to if: Vlan15 > Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match > module pattern to if: Vlan20 > Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match > module pattern to if: Vlan30 > Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match > module pattern to if: Vlan32 > Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 > CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match > module pattern to if: Loopback0 > Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 SRT_DEVHANDLER-6-ROUTE_DEST > Routes is now empty > > > > > ******************************************************** > Jan Susegg > F?rstekonsulent, IT-tjenesten > H?gskolen i Nord-Tr?ndelag > R?stad > 7600 LEVANGER > tlf: 74022711 mob: 91184451 > ******************************************************** > > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

2 1

Cisco 2900xl + ATM module
by woj＠tstd.pl 18 Feb '05

18 Feb '05

Hi, I have some question about NAV and support for new devices. There was already such topic, but I received suggestion to write some classes in Java to make NAV support new device. My question is - do NAV developers have plans to build some interface by which non-programmer user can add snmpoids for cricket, reports and so on. Maybe it is good idea to make some public database where nav-users can put plugins which supports new devices. Like I said, I have bunch of Alcatel stuff, which I also want to monitor via NAV. I added to NAV cisco catalyst 2900xl switch which has ATM module onboard. It would be nice to have some stats from this module... And another question - what about ATM - pvc support in NAV, are there any chances? best regards. -- Wojciech (Woj) Kozicki >From magnus at ntnu.no Fri Feb 18 16:36:24 2005 From: magnus at ntnu.no (Magnus Nordseth) Date: Fri Feb 18 16:36:26 2005 Subject: [Nav-users] Cisco 2900xl + ATM module In-Reply-To: <200502181504.32188.woj(a)tstd.pl> References: <200502181504.32188.woj(a)tstd.pl> Message-ID: <20050218153624.GA3120(a)stud.ntnu.no> Wojciech Kozicki: > I have some question about NAV and support for new devices. There was already > such topic, but I received suggestion to write some classes in Java to make > NAV support new device. > > My question is - do NAV developers have plans to build some interface by which > non-programmer user can add snmpoids for cricket, reports and so on. Maybe it > is good idea to make some public database where nav-users can put plugins > which supports new devices. Like I said, I have bunch of Alcatel stuff, which > I also want to monitor via NAV. We have discussed replacing the use of cricket and use our own framwork in java to collect statistics as well. Then it would be possible to register a new OID, and we will then be able to check which devices support it and start collecting statistics from it automagically. I'm not sure of the priority of this feature, but as alwys, feedback from all users is highly appreciated. Best regards, -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc >From kjetil.olsen at usit.uio.no Sat Feb 19 10:48:42 2005 From: kjetil.olsen at usit.uio.no (Kjetil Otter Olsen) Date: Sat Feb 19 10:48:46 2005 Subject: [Nav-users] Cisco 2900xl + ATM module In-Reply-To: <20050218153624.GA3120(a)stud.ntnu.no> References: <200502181504.32188.woj(a)tstd.pl> <20050218153624.GA3120(a)stud.ntnu.no> Message-ID: <1089.85.164.144.150.1108806522.squirrel(a)webmail.uio.no> On Fri, February 18, 2005 16:36, Magnus Nordseth said: > > We have discussed replacing the use of cricket and use our own framwork in > java to collect statistics as well. Then it would be possible to register a > new OID, and we will then be able to check which devices support it and > start collecting statistics from it automagically. I think this is a great idea! We would even be willing to assist in such a development, one way or another. --Kjetil

1 0

problems with getDeviceData (beta10)
by Jan.Susegg＠hint.no 17 Feb '05

17 Feb '05

I have some problems with getDeviceData. It stops collecting/deletes GWP data on some routers after getBoksMacs.sh has run. If I restart getDeviceData it works ok for a new hour until getBoksMacs.sh runs again. Running beta10. Feb 17 09:20:55 2005 xxxx-gw.uninett.no_13 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Loopback0 Feb 17 09:20:55 2005 xxxx-gw.uninett.no_13 CGW_DEVHANDLER-4-CGW_MATCH-MODULE No module match from interf, defaulting to module 0 Feb 17 09:20:55 2005 xxxx-gw.uninett.no_13 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Loopback1 Feb 17 09:20:55 2005 xxxx-gw.uninett.no_13 CGW_DEVHANDLER-4-CGW_MATCH-MODULE No module match from interf, defaulting to module 0 Feb 17 09:21:21 2005 xxxxxx-gsw.hint.no_09 GwportHandler-3-HANDLE SQLException: ERROR: $2 referential integrity violation - key referenced from gwportpre fix not found in prefix Feb 17 09:29:16 2005 xxxxxx-gsw.hint.no_02 ServerPlugin-6-canHandleDevice We cannot serve xxxxxx-gsw.hint.no Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan10 Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan15 Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan20 Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan30 Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan32 Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Loopback0 Feb 17 09:21:23 2005 xxx-gw.uninett.no_05 SRT_DEVHANDLER-6-ROUTE_DEST Routes is now empty ******************************************************** Jan Susegg F?rstekonsulent, IT-tjenesten H?gskolen i Nord-Tr?ndelag R?stad 7600 LEVANGER tlf: 74022711 mob: 91184451 ********************************************************

1 0

Release-notice: NAV 3.0 beta 10
by werner＠usit.uio.no 16 Feb '05

16 Feb '05

On Mon, Feb 14, 2005 at 09:12:12AM +0100, Wojciech Kozicki wrote: > > > NAV 3.0 beta 10 is now available download at http://metanav.ntnu.no/ . > > > > And a Debian-package is built and is available here: > > > > http://skolelinux.no/~werner/debian/pool/unstable/n/nav/ > > > > I have not tested this package, nor included the database upgrade as > > part of the package, so you'll have to upgrade the database > > yourselves. > > ok, where I will found necessary sql statements? Upstream forgot to include it in doc/Makefile.in, but I made a small patch and built a new debian-package which include the sql-upgrade file in /usr/share/doc/nav/sql/upgrades/ . - Werner >From werner at skolelinux.no Mon Feb 14 11:41:37 2005 From: werner at skolelinux.no (Morten Werner Olsen) Date: Wed Feb 16 08:40:13 2005 Subject: [Nav-users] Release-notice: NAV 3.0 beta 10 In-Reply-To: <42107EA6.4050406(a)ntnu.no> References: <420CC263.1050801(a)ntnu.no> <20050212151136.GA11338(a)debra.uio.no> <200502140912.13019.woj(a)tstd.pl> <42107EA6.4050406(a)ntnu.no> Message-ID: <20050214104137.GC3072(a)lillehjelper.wcc.no> On Mon, Feb 14, 2005 at 11:34:14AM +0100, Morten Vold wrote: > >> I have not tested this package, nor included the database upgrade > >> as part of the package, so you'll have to upgrade the database > >> yourselves. > > ok, where I will found necessary sql statements? > > I don't know where Morten Werner's Debian package puts it, but you can > find it here (from the Subversion repository): The file is located in /usr/share/doc/nav/sql/updates/ together with the README-file. - Werner >From Borge.Brunes at cc.uit.no Thu Feb 17 08:59:13 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Thu Feb 17 08:59:31 2005 Subject: [Nav-users] Problem with eventEngine Message-ID: <20050217085447.W53178(a)duke.cc.uit.no> [running beta10] I'm getting tons of these messages in the eventEngine.log: eventEngine EVENTQ_MONITOR_TASK-3-RUN SQLException when fetching from eventq: Operation requires a scrollable ResultSet, but this ResultSet is FORWARD_ONLY. Does anyone have a clue what this means, and maybe have a solution? -- B?rge Brunes Univ. of Troms? >From morten.vold at ntnu.no Thu Feb 17 09:21:53 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Thu Feb 17 09:21:54 2005 Subject: [Nav-users] report-errors In-Reply-To: <20050214144223.A409A13C5EB(a)merke.itea.ntnu.no> References: <20050214144223.A409A13C5EB(a)merke.itea.ntnu.no> Message-ID: <42145421.2070603(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Fredrik Holmberg wrote: > Here's another tough nut to crack for ya :) Oops, sorry for overlooking this one :) > When I edit/add an IP device using "Edit database", after supplying ip, cat, > community, room and organization, pressing "Continue" or "Update" causes NAV > beta 10 to return: > Error: psycopg.ProgrammingError: ERROR: permission denied for relation > snmpoid select snmpoid from snmpoid where oidkey='typeoid' That's rather strange. Edit Database uses the navwrite account to access the NAVdb, and there is no reason this account should've had its write access revoked from the snmpoid table during the upgrade to beta10. Are you sure this message was absent when running beta9 and earlier? Anyway, you can try to reset the privileges for the navread and navwrite users by issuing the following SQL statements after connecting to the manage database ("psql manage"): SELECT nav_grant('navread', false); SELECT nav_grant('navwrite', true); These two are also part of manage.sql, which initializes the manage database on your first install. They invoke a stored procedure, which is part of the manage database - a procedure that grants rights to all the objects in the database (tables, views and sequences). - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCFFQhXxIl0kpcOkQRAqCHAKDRhf7oMacbXCiSEJW7dkbfm2qwOACfZXpR AaAqNG25qaYnQXsXkLAOdPw= =7ZRo -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Thu Feb 17 09:23:23 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Thu Feb 17 09:23:42 2005 Subject: [Nav-users] Problem with eventEngine In-Reply-To: <20050217085447.W53178(a)duke.cc.uit.no> References: <20050217085447.W53178(a)duke.cc.uit.no> Message-ID: <4214547B.8020909(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Borge Brunes wrote: > I'm getting tons of these messages in the eventEngine.log: > eventEngine EVENTQ_MONITOR_TASK-3-RUN SQLException when fetching from > eventq: Operation requires a scrollable ResultSet, but this ResultSet is > FORWARD_ONLY. > > Does anyone have a clue what this means, and maybe have a solution? Not that I really know any of the code of the Event Engine, but I would ask which versions of the PostgreSQL server and the PostgreSQL JDBC driver you have installed? - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCFFR7XxIl0kpcOkQRAjI+AJ9V+dcFiJCfkKmYc61CpUBub5J77QCfdN6K yXN+YRom+H9V9aOpHpmzeT4= =5wBr -----END PGP SIGNATURE----- >From Borge.Brunes at cc.uit.no Thu Feb 17 09:32:19 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Thu Feb 17 09:32:30 2005 Subject: [Nav-users] Problem with eventEngine In-Reply-To: <4214547B.8020909(a)ntnu.no> References: <20050217085447.W53178(a)duke.cc.uit.no> <4214547B.8020909(a)ntnu.no> Message-ID: <20050217093107.X53336(a)duke.cc.uit.no> Hei Morten, On Thu, 17 Feb 2005, Morten Vold wrote: > Not that I really know any of the code of the Event Engine, but I would > ask which versions of the PostgreSQL server and the PostgreSQL JDBC > driver you have installed? postgresql-server-7.4.7 postgresql-jdbc-8.0.310 B?rge >From morten.vold at ntnu.no Thu Feb 17 09:51:50 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Thu Feb 17 09:51:49 2005 Subject: [Nav-users] Problem with eventEngine In-Reply-To: <20050217093107.X53336(a)duke.cc.uit.no> References: <20050217085447.W53178(a)duke.cc.uit.no> <4214547B.8020909(a)ntnu.no> <20050217093107.X53336(a)duke.cc.uit.no> Message-ID: <42145B26.7050304(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Borge Brunes wrote: > postgresql-server-7.4.7 > postgresql-jdbc-8.0.310 Ok, I would, first of all, recommend that you try a JDBC driver matching the version of your server, i.e. the latest 7.4 version (although the website jdbc.postgresql.org suggest that newer versions of the driver may work with older versions of the server). Probably more important is what JDBC version your JDBC driver was made for. At http://jdbc.postgresql.org/ you can choose between drivers adhering to JDBC 1, 2 or 3. I don't think JDBC1 supports scrolling result sets, so you should at least download the JDBC2-version of the driver. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCFFslXxIl0kpcOkQRAk+lAKDfcV8j8XFgOE8jNhwqJSbtluW7SgCfTQdI hBMr+8XBnSZc0v42x9m84G8= =Pz8e -----END PGP SIGNATURE----- >From fredrik.holmberg at luh.hihm.no Thu Feb 17 12:33:45 2005 From: fredrik.holmberg at luh.hihm.no (Fredrik Holmberg) Date: Thu Feb 17 12:33:55 2005 Subject: [Nav-users] report-errors In-Reply-To: <42145421.2070603(a)ntnu.no> Message-ID: <20050217113353.4EFDA66DF4(a)royk.itea.ntnu.no> Thanks! Those two SQL statements solved it. The error-message appeared after upgrading to Beta 10 from Beta 9.. Regards, Fredrik Holmberg -----Original Message----- From: Morten Vold [mailto:morten.vold@ntnu.no] Sent: Thursday, February 17, 2005 9:22 AM To: Fredrik Holmberg Cc: nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] report-errors -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Fredrik Holmberg wrote: > Here's another tough nut to crack for ya :) Oops, sorry for overlooking this one :) > When I edit/add an IP device using "Edit database", after supplying ip, cat, > community, room and organization, pressing "Continue" or "Update" causes NAV > beta 10 to return: > Error: psycopg.ProgrammingError: ERROR: permission denied for relation > snmpoid select snmpoid from snmpoid where oidkey='typeoid' That's rather strange. Edit Database uses the navwrite account to access the NAVdb, and there is no reason this account should've had its write access revoked from the snmpoid table during the upgrade to beta10. Are you sure this message was absent when running beta9 and earlier? Anyway, you can try to reset the privileges for the navread and navwrite users by issuing the following SQL statements after connecting to the manage database ("psql manage"): SELECT nav_grant('navread', false); SELECT nav_grant('navwrite', true); These two are also part of manage.sql, which initializes the manage database on your first install. They invoke a stored procedure, which is part of the manage database - a procedure that grants rights to all the objects in the database (tables, views and sequences). - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCFFQhXxIl0kpcOkQRAqCHAKDRhf7oMacbXCiSEJW7dkbfm2qwOACfZXpR AaAqNG25qaYnQXsXkLAOdPw= =7ZRo -----END PGP SIGNATURE-----

1 0

vlan information from cisco switches
by woj＠tstd.pl 15 Feb '05

15 Feb '05

Dnia wtorek, 15 lutego 2005 10:19, Fredrik Holmberg napisa?: > I forgot to include NAV Beta 9: > > nav3:~ # diff /usr/local/nav/etc/report/report.conf > /usr/local/src/nav-3.0_beta9/subsystem/report/src/report.conf > 370c370 > < $sql="SELECT b1.sysname,s1.interface, m1.module, s1.port, s1.link, > s1.speed, s1.duplex, s1.media, s1.trunk, vlan.vlan,s1.portname, b2.sysname > as to_netboxid,m2.module AS remote_module, s1.swportid, b1.netboxid as > netboxid, b1.catid FROM swport AS s1 JOIN module AS m1 USING (moduleid) > JOIN netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON > (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON > (s1.swportid=swportvlan.swportid AND trunk='f') left join vlan using(vlan) > LEFT JOIN swport AS s2 ON (s1.to_swportid=s2.swportid) LEFT JOIN module AS > m2 ON (s2.moduleid=m2.moduleid)"; > --- > > > $sql="SELECT b1.sysname,s1.interface, m1.module, s1.port, s1.link, > > s1.speed, s1.duplex, s1.media, s1.trunk, vlan.vlan,s1.portname, b2.sysname > as to_netboxid,m2.module AS remote_module, s1.swportid, b1.netboxid as > netboxid, b1.catid FROM swport AS s1 JOIN module AS m1 USING (moduleid) > JOIN netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON > (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON > (s1.swportid=swportvlan.swportid AND trunk='f') left join vlan > using(vlanid) LEFT JOIN swport AS s2 ON (s1.to_swportid=s2.swportid) LEFT > JOIN module AS m2 ON (s2.moduleid=m2.moduleid)"; > > :) Ok, it worked :) > best regards -- Wojciech (Woj) Kozicki

1 0

vlan information from cisco switches
by woj＠tstd.pl 15 Feb '05

15 Feb '05

Dnia wtorek, 15 lutego 2005 10:03, Fredrik Holmberg napisa?: > Are you referring to "Report"? > It doesn't show VLAN when you view the switchports? > Yes, I meant "report"... > If this is the case, I might have a "fix" for you.. :) best regards -- Wojciech (Woj) Kozicki

2 1

report-errors
by fredrik.holmberg＠luh.hihm.no 15 Feb '05

15 Feb '05

A follow-up to the previous mail; this is what root@localhost receives in local mail-folder every hour: N229 root(a)nav3.hihm.no Tue Feb 15 09:10 51/3090 Cron <navcron@nav3> $BINDIR/getBoksMacs.sh $NUM_THREADS >From navcron(a)nav3.hihm.no Tue Feb 15 09:10:07 2005 X-Original-To: root@localhost Delivered-To: root(a)localhost.hihm.no From: root@localhost (Cron Daemon) To: root(a)localhost.hihm.no Subject: Cron <navcron@nav3> $BINDIR/getBoksMacs.sh $NUM_THREADS X-Cron-Env: <PERL5LIB=:/usr/local/nav/lib/perl> X-Cron-Env: <PYTHONPATH=:/usr/local/nav/lib/python> X-Cron-Env: <CLASSPATH=.:/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/jav a/Database.jar:/usr/local/nav/lib/java/Event.jar:/us r/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/ local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.j ar:/usr/local/nav/lib/java/pg74.jar:/usr/local/nav/lib/java/snmp.jar> X-Cron-Env: <BINDIR=/usr/local/nav/bin> X-Cron-Env: <LOCALSTATEDIR=/usr/local/nav/var> X-Cron-Env: <MAILTO=root@localhost> X-Cron-Env: <CRICKETDIR=/usr/local/nav/cricket> X-Cron-Env: <NUM_THREADS=24> X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/usr/local/nav> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=navcron> Date: Tue, 15 Feb 2005 09:10:07 +0100 (CET) org.postgresql.util.PSQLException: ERROR: permission denied for relation snmpoid at org.postgresql.util.PSQLException.parseServerError(PSQLException.java:139) at org.postgresql.core.QueryExecutor.executeV3(QueryExecutor.java:152) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:100) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:43) at org.postgresql.jdbc1.AbstractJdbc1Statement.execute(AbstractJdbc1Statement.j ava:517) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.j ava:50) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeQuery(AbstractJdbc1Statem ent.java:233) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeQuery(AbstractJdbc1Statem ent.java:221) at no.ntnu.nav.Database.Database.query(Database.java:740) at no.ntnu.nav.Database.Database.query(Database.java:723) at getBoksMacs.main(getBoksMacs.java:372) Exception in thread "main" org.postgresql.util.PSQLException: ERROR: permission denied for relation snmpoid at org.postgresql.util.PSQLException.parseServerError(PSQLException.java:139) at org.postgresql.core.QueryExecutor.executeV3(QueryExecutor.java:152) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:100) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:43) at org.postgresql.jdbc1.AbstractJdbc1Statement.execute(AbstractJdbc1Statement.j ava:517) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.j ava:50) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeQuery(AbstractJdbc1Statem ent.java:233) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeQuery(AbstractJdbc1Statem ent.java:221) at no.ntnu.nav.Database.Database.query(Database.java:740) at no.ntnu.nav.Database.Database.query(Database.java:723) at getBoksMacs.main(getBoksMacs.java:372) I also tried restarting the server. Sincerely, Fredrik Holmberg -----Original Message----- From: nav-users-bounces(a)itea.ntnu.no [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Fredrik Holmberg Sent: Monday, February 14, 2005 3:42 PM To: nav-users(a)itea.ntnu.no Subject: RE: [Nav-users] report-errors It worked! Here's another tough nut to crack for ya :) When I edit/add an IP device using "Edit database", after supplying ip, cat, community, room and organization, pressing "Continue" or "Update" causes NAV beta 10 to return: Error: psycopg.ProgrammingError: ERROR: permission denied for relation snmpoid select snmpoid from snmpoid where oidkey='typeoid' >From getDeviceData.log: ...... Feb 14 15:26:08 2005 getDeviceData PLUGIN_MONITOR-6-INIT Starting query scheduler Feb 14 15:26:08 2005 getDeviceData PLUGIN_MONITOR-3-UPDATE_TYPES SQLException: org.postgresql.util.PSQLException: ERROR: permission denied for relation snmpoid Feb 14 15:26:08 2005 getDeviceData PLUGIN_MONITOR-3-UPDATE_NETBOXES SQLException: org.postgresql.util.PSQLException: ERROR: permission denied for relation snmpoid Feb 14 15:26:08 2005 getDeviceData PLUGIN_MONITOR-5-UPDATE_NETBOXES Num netboxes: 0 (0 high, 0 new, 0 removed, 0 skipped, 0 runq, 0 active) ...... /var/log/postgresql: ..... 2005-02-14 15:26:08 ERROR: permission denied for relation snmpoid 2005-02-14 15:26:08 ERROR: permission denied for relation snmpoid ..... getBoksMacs.log: ..... OID db...Feb 14 15:10:01 2005 getBoksData null-5-INIT ============ getBoksData starting ============ Feb 14 15:10:01 2005 getBoksData null-5-INIT Running with 24 threads. watchMacs read: 0 Dumping data from tables... netboxmac...63 ms. boks...147 ms. swport...159 ms. swportblocked...70 ms. vlan...187 ms. swp_boks...13 ms. OID db... ..... - Fredrik Holmberg -----Original Message----- From: Morten Vold [mailto:morten.vold@ntnu.no] Sent: Monday, February 14, 2005 2:27 PM To: Fredrik Holmberg Cc: nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] report-errors -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Fredrik Holmberg wrote: > Configuration error! The report generator is not able to do such > The same thing happens when I access "Routers" etc. > Installed the rpm and applied the sql-files. > Is there a "quick-fix" for this? :) Did you remember to restart Apache and Tomcat? You also need to enter the webapps directory of Tomcat and delete the vPServer and navAdmin directories before starting Tomcat over (to make sure that Tomcat is running the newest version of these NAV components). - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCEKc0XxIl0kpcOkQRAhNiAKDj7PCdcQLoGP2f31plkkEtk37AfgCfc0lS ND+73RWyxPG4ZYukPy/Wxcs= =xBUV -----END PGP SIGNATURE----- _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

Cheetah upgrade may be necessary
by morten.vold＠ntnu.no 14 Feb '05

14 Feb '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 As previously discussed on nav-users, there seems to have been a problem in our Cheetah version which did not warn us properly of syntax errors in our Cheetah templates. Therefore, Cheetah was upgraded on our development server from version 0.9.15 to 0.9.16a2. Apparently, templates compiled with this version of Cheetah are not backwards-compatible with Cheetah 0.9.15, as we discovered when upgrading NAV on our "test production" server. If your NAV web interface crashes immediately and complains of Cheetah/template problems after upgrading NAV, you should make sure you have at least version 0.9.16a2 of Cheetah installed on your server. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCEKQnXxIl0kpcOkQRAsjIAKDS0ULU0cRrZYxtIEEOYg9EViLTkQCgqRQ/ 2oClgJymTGEJnIXmHEE62CI= =EJqC -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Mon Feb 14 14:27:16 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Mon Feb 14 14:27:18 2005 Subject: [Nav-users] report-errors In-Reply-To: <20050214115720.326DB66CFE(a)royk.itea.ntnu.no> References: <20050214115720.326DB66CFE(a)royk.itea.ntnu.no> Message-ID: <4210A734.5040208(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Fredrik Holmberg wrote: > Configuration error! The report generator is not able to do such > The same thing happens when I access "Routers" etc. > Installed the rpm and applied the sql-files. > Is there a "quick-fix" for this? :) Did you remember to restart Apache and Tomcat? You also need to enter the webapps directory of Tomcat and delete the vPServer and navAdmin directories before starting Tomcat over (to make sure that Tomcat is running the newest version of these NAV components). - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCEKc0XxIl0kpcOkQRAhNiAKDj7PCdcQLoGP2f31plkkEtk37AfgCfc0lS ND+73RWyxPG4ZYukPy/Wxcs= =xBUV -----END PGP SIGNATURE----- >From fredrik.holmberg at luh.hihm.no Mon Feb 14 15:42:18 2005 From: fredrik.holmberg at luh.hihm.no (Fredrik Holmberg) Date: Mon Feb 14 15:42:25 2005 Subject: [Nav-users] report-errors In-Reply-To: <4210A734.5040208(a)ntnu.no> Message-ID: <20050214144223.A409A13C5EB(a)merke.itea.ntnu.no> It worked! Here's another tough nut to crack for ya :) When I edit/add an IP device using "Edit database", after supplying ip, cat, community, room and organization, pressing "Continue" or "Update" causes NAV beta 10 to return: Error: psycopg.ProgrammingError: ERROR: permission denied for relation snmpoid select snmpoid from snmpoid where oidkey='typeoid' >From getDeviceData.log: .... Feb 14 15:26:08 2005 getDeviceData PLUGIN_MONITOR-6-INIT Starting query scheduler Feb 14 15:26:08 2005 getDeviceData PLUGIN_MONITOR-3-UPDATE_TYPES SQLException: org.postgresql.util.PSQLException: ERROR: permission denied for relation snmpoid Feb 14 15:26:08 2005 getDeviceData PLUGIN_MONITOR-3-UPDATE_NETBOXES SQLException: org.postgresql.util.PSQLException: ERROR: permission denied for relation snmpoid Feb 14 15:26:08 2005 getDeviceData PLUGIN_MONITOR-5-UPDATE_NETBOXES Num netboxes: 0 (0 high, 0 new, 0 removed, 0 skipped, 0 runq, 0 active) .... /var/log/postgresql: ... 2005-02-14 15:26:08 ERROR: permission denied for relation snmpoid 2005-02-14 15:26:08 ERROR: permission denied for relation snmpoid ... getBoksMacs.log: ... OID db...Feb 14 15:10:01 2005 getBoksData null-5-INIT ============ getBoksData starting ============ Feb 14 15:10:01 2005 getBoksData null-5-INIT Running with 24 threads. watchMacs read: 0 Dumping data from tables... netboxmac...63 ms. boks...147 ms. swport...159 ms. swportblocked...70 ms. vlan...187 ms. swp_boks...13 ms. OID db... ... - Fredrik Holmberg -----Original Message----- From: Morten Vold [mailto:morten.vold@ntnu.no] Sent: Monday, February 14, 2005 2:27 PM To: Fredrik Holmberg Cc: nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] report-errors -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Fredrik Holmberg wrote: > Configuration error! The report generator is not able to do such > The same thing happens when I access "Routers" etc. > Installed the rpm and applied the sql-files. > Is there a "quick-fix" for this? :) Did you remember to restart Apache and Tomcat? You also need to enter the webapps directory of Tomcat and delete the vPServer and navAdmin directories before starting Tomcat over (to make sure that Tomcat is running the newest version of these NAV components). - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCEKc0XxIl0kpcOkQRAhNiAKDj7PCdcQLoGP2f31plkkEtk37AfgCfc0lS ND+73RWyxPG4ZYukPy/Wxcs= =xBUV -----END PGP SIGNATURE-----

1 0

Release-notice: NAV 3.0 beta 10
by morten.vold＠ntnu.no 14 Feb '05

14 Feb '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Wojciech Kozicki wrote: >> I have not tested this package, nor included the database upgrade >> as part of the package, so you'll have to upgrade the database >> yourselves. > ok, where I will found necessary sql statements? I don't know where Morten Werner's Debian package puts it, but you can find it here (from the Subversion repository): https://svn.nav.ntnu.no/nav/navme/tags/3.0_beta10/doc/sql/upgrades/3.0_beta… Also read https://svn.nav.ntnu.no/nav/navme/tags/3.0_beta10/doc/sql/upgrades/README if you haven't already :) - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCEH6mXxIl0kpcOkQRAoJFAKDIX2VIcfJDWiMmmLB03DPp92CWPQCfeih/ 5Qx2lWI3zXNo/YiLzH2sI7I= =MDh8 -----END PGP SIGNATURE----- >From woj at tstd.pl Mon Feb 14 12:36:25 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Mon Feb 14 12:37:00 2005 Subject: [Nav-users] vlan information from cisco switches Message-ID: <200502141236.26162.woj(a)tstd.pl> Hi, I reported it earlier, I have problem with getting info about vlans from cisco 2900XL and 2950 switches, even if there is simple config: vlan trunk server------switch-------router Cricket stats for switches, mac info, switchports raport - everything is working, but there is no vlan information. On routers I specified vlan info via nav-style descriptions and it worked - in router port report I have vlan info. I think, that nav-style descriptions for switches interfaces won't fix it? regards -- Wojciech (Woj) Kozicki >From fredrik.holmberg at luh.hihm.no Mon Feb 14 12:57:12 2005 From: fredrik.holmberg at luh.hihm.no (Fredrik Holmberg) Date: Mon Feb 14 12:57:24 2005 Subject: [Nav-users] report-errors Message-ID: <20050214115720.326DB66CFE(a)royk.itea.ntnu.no> After upgrading to beta 10 the following message appears when I access https://nav-server/report/netbox: Configuration error! The report generator is not able to do such things.ERROR: column "netboxid" does not exist SELECT roomid,sysname,ip,catid,sub,typeid,typename,orgid,netbox.up,modules,swport,g wport,'Mem',snmp,val AS Function,netbox.netboxid,prefixid FROM type RIGHT OUTER JOIN netbox USING (typeid) LEFT JOIN (SELECT netboxid,count(netboxid) AS gwport FROM gwport JOIN module USING (moduleid) GROUP BY netboxid) tempaggr1 USING (netboxid) LEFT JOIN (SELECT netboxid,count(netboxid) AS swport FROM swport JOIN module USING (moduleid) GROUP BY netboxid) tempaggr2 USING (netboxid) LEFT JOIN (SELECT netboxid,count(netboxid) AS modules FROM module GROUP BY netboxid) tempaggr3 USING (netboxid) LEFT JOIN (SELECT netboxid,count(netboxid) AS sub FROM netboxcategory GROUP BY netboxid) tempaggr4 USING (netboxid) LEFT JOIN (SELECT netboxid,count(netboxid) AS snmp FROM type GROUP BY netboxid) tempaggr1 USING (netboxid) LEFT JOIN (SELECT netboxid,count(netboxid) AS swport FROM swport JOIN module USING (moduleid) GROUP BY netboxid) tempaggr2 USING (netboxid) LEFT JOIN (SELECT netboxid,count(netboxid) AS modules FROM module GROUP BY netboxid) tempaggr3 USING (netboxid) LEFT JOIN (SELECT netboxid,count(netboxid) AS sub FROM netboxcategory GROUP BY netboxid) tempaggr4 USING (netboxid) LEFT JOIN (SELECT netboxid,count(netboxid) AS snmp FROM netboxsnmpoid GROUP BY netboxid) tempaggr5 USING (netboxid) LEFT JOIN netboxinfo ON (netbox.netboxid=netboxinfo.netboxid AND var='function') ORDER BY roomid LIMIT 100 OFFSET 0 The same thing happens when I access "Routers" etc. Installed the rpm and applied the sql-files. Is there a "quick-fix" for this? :) Regards, Fredrik Holmberg

1 0

adding cisco 2900XL switch to NAV
by woj＠tstd.pl 14 Feb '05

14 Feb '05

Hi, After adding another Cisco Catalyst 2900xl switch to NAV I get following error: --> Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/var/www/nav/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/var/www/nav/editdb/editdb.py", line 463, in editPage outputForm,action) File "/var/www/nav/editdb/editdb.py", line 2435, in add disabled=True)) TypeError: __init__() takes at least 2 non-keyword arguments (1 given) <-- One 2900xl is running in NAV, but I had to add new type, because NAV don't recognize these switches. When I am trying to add another 2900 switch, after clicking add I have: "Error: pysnmp.asn1.error.ValueConstraintError: Single value constraint for Version: 0 not within allowed values" then, clicking continue once again, I have proper recognize of type (because I added it earlier), but serial number is: "0x10". So, continue once again and... there is error which I quoted on top. Also - in beta9: - IP scope is not working, - Traffic Map crashes my FireFox sometimes, in Konqueror there is applet failed info. - still no desc for routers interfaces in Cricket - what about traffic measure in traffic map? I am using Debian packet of NAV best regards -- Wojciech (Woj) Kozicki >From woj at tstd.pl Fri Feb 11 11:15:42 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Fri Feb 11 11:16:14 2005 Subject: [Nav-users] adding cisco 2900XL switch to NAV Message-ID: <200502111115.42876.woj(a)tstd.pl> Dnia czwartek, 10 lutego 2005 08:31, Fredrik Holmberg napisa?: > nav3:~ # diff /usr/local/nav/cricket/cricket-config/router-interfaces/.nav > /usr/local/src/nav-3.0_beta9/subsystem/statTools/cricket/cricket-config/rou >t er-interfaces/.nav > 14c14 > < descr = select nettype,netident from gwportprefix left join prefix using > (prefixid) left join vlan using (vlanid) where gwportid=$id and netident is > not null > --- > > > descr = select nettype,netident from gwportprefix left join prefix > > using > > (prefixid) left join vlan using (vlan) where gwportid=$id and netident is > not null ok, I patched it and it worked! But. In Debian installation navcron user hasn't got bash (/bin/false only). When I gived bash to navcron user and started makecricketconfig.pl there where some access denied errors. But it worked after running makecricketconfig.pl as root. Another question. After adding new switch to nav, and running makecricketconfig.pl, when I should see first stats for this switch? I have some new switches in NAV, but I can't see them in cricket. best regards. -- Wojciech (Woj) Kozicki

2 4

Release-notice: NAV 3.0 beta 10
by morten.vold＠ntnu.no 12 Feb '05

12 Feb '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 beta 10 is now available download at http://metanav.ntnu.no/ . Upgrading from beta 8 ===================== Memory collection has been added, and requires a small update to the NAVdb schema. Please run 3.0_beta10.sql and snmpoid.sql from doc/sql/upgrades/ as documented in the README file of the same directory. CHANGES ======= Version 3.0_beta10 (released 11 February 2005) ##################################################################### ## WARNING WARNING WARNING WARNING WARNING WARNING WARNING ## ##################################################################### ## ## ## This release makes changes to the NAV database. If you are ## ## upgrading from a previous release you also need to upgrade your ## ## database schema. For information on how to upgrade the database ## ## schema, please take a look in doc/sql/upgrades for more ## ## information. ## ## ## ##################################################################### Improvements: * gDD now makes sure to give priority to new devices when its work load with old devices is high. * gDD now refers to IP Devices by sysname in its logs, making it easier to track its actions when reading the logs. * gDD now correctly updates the netident of elinks. * gDD will now also attempt to extract software version information from a device's sysDescr OID (also collects sw_ver for the device itself, and not just its modules). * A bug that prevented the service monitor's LDAP plugin from functioning from time to time was fixed. * Router ports that are administratively down are removed from NAVdb by gDD. * The report generator now supports multi-line and complex SQL queries. * The SQL queries of the netbox, gw, sw, edge and wlan reports were optimized for speed. Additions: * gDD will now collect memory information from devices. Be advised that I haven't had time to test this release, good luck! - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCDMJjXxIl0kpcOkQRAjpLAJ9/WKL/PYy33e4zb7Vfe1vnhAIO+gCgvZSJ CFtL8itSXRWK5LJoG7jWoiI= =kN/H -----END PGP SIGNATURE----- >From Ketil.Forselv at hin.no Fri Feb 11 18:36:31 2005 From: Ketil.Forselv at hin.no (Forselv Ketil) Date: Fri Feb 11 18:36:37 2005 Subject: SV: [Nav-users] Release-notice: NAV 3.0 beta 10 Message-ID: <4147C56944E2B64D978FA0EAB10A14FA4B0980(a)fagserver2.fag.hin.no> Hi I get compile-error for building getDeviceData when trying to compile source-code for Beta_10 (Redhat 9.0) Regards Ketil Building getDeviceData ... (cd getDeviceData && /usr/local/ant/bin//ant ) && touch getDeviceData Buildfile: build.xml init: [mkdir] Created dir: /root/beta10/nav-3.0_beta10/src/getDeviceData/build compile: [javac] Compiling 15 source files to /root/beta10/nav-3.0_beta10/src/getDeviceData/build [javac] /root/beta10/nav-3.0_beta10/src/getDeviceData/src/OidTester.java:76: cannot resolve symbol [javac] symbol : method setNetbox (java.lang.String) [javac] location: class no.ntnu.nav.logger.Log [javac] Log.setNetbox(nb.getSysname()); [javac] ^ [javac] /root/beta10/nav-3.0_beta10/src/getDeviceData/src/OidTester.java:286: cannot resolve symbol [javac] symbol : method setNetbox (<nulltype>) [javac] location: class no.ntnu.nav.logger.Log [javac] Log.setNetbox(null); [javac] ^ [javac] /root/beta10/nav-3.0_beta10/src/getDeviceData/src/QueryNetbox.java:720: cannot resolve symbol [javac] symbol : method setNetbox (java.lang.String) [javac] location: class no.ntnu.nav.logger.Log [javac] Log.setNetbox(sysName); [javac] ^ [javac] /root/beta10/nav-3.0_beta10/src/getDeviceData/src/QueryNetbox.java:849: cannot resolve symbol [javac] symbol : method setNetbox (<nulltype>) [javac] location: class no.ntnu.nav.logger.Log [javac] Log.setNetbox(null); [javac] ^ [javac] 4 errors BUILD FAILED /root/beta10/nav-3.0_beta10/src/getDeviceData/build.xml:62: Compile failed; see the compiler error output for details. Total time: 2 seconds make[1]: *** [getDeviceData] Error 1 make[1]: Leaving directory `/root/beta10/nav-3.0_beta10/src' make: *** [all] Error 1

2 1

Uplink (eLink) in vLanPlot
by odd.hauge＠himolde.no 08 Feb '05

08 Feb '05

Hi. In Nav2 it was possible to get the uplink in the Traffice Map (vLanPlot) by adding something like this in the vlan.txt file: 999:elink,molde-gw,trd-gw:128.39.46.132/30. Is there a similar method in Nav3 to get the uplink shown without having snmp-access to the uplink router ? - odd arne hauge

1 0

vlanplot and relation "boks"
by Aage.Olai.Johnsen＠hitos.no 07 Feb '05

07 Feb '05

Hi there. Having troubles with vlanplot on Nav 3beta8. Since everything seems to be working, no updates have been done to the installation. But the vlanplot-interface show error "an error occured fetching data from server:" when accessing lokal lans. Example: h**ps://nav.ingok.hitos.no/vlanPlot/ , and doubleklick on "158.39.19.1". Havent found any "boks" relations in any of the .sql-files from nav. Any tips? The tomcat gives this error: org.postgresql.util.PSQLException: ERROR: relation "boks" does not exist at org.postgresql.util.PSQLException.parseServerError(PSQLException.java:139) at org.postgresql.core.QueryExecutor.executeV3(QueryExecutor.java:156) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:101) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:43) at org.postgresql.jdbc1.AbstractJdbc1Statement.execute(AbstractJdbc1Statement .java:517) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement .java:50) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeQuery(AbstractJdbc1Stat ement.java:233) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeQuery(AbstractJdbc1Stat ement.java:221) at no.ntnu.nav.Database.Database.query(Database.java:740) at no.ntnu.nav.Database.Database.query(Database.java:723) at SqlBoks.listBoks(vPServer.java:1243) at SqlBoks.serviceRequest(vPServer.java:129) at vPServer.service(vPServer.java:87) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Applicati onFilterChain.java:200) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilter Chain.java:146) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve. java:209) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.inv okeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433 ) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve. java:144) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.inv okeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433 ) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948) at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2358) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:1 33) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.inv okeNext(StandardPipeline.java:596) at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValv e.java:118) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.inv okeNext(StandardPipeline.java:594) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:1 16) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.inv okeNext(StandardPipeline.java:594) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433 ) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.ja va:127) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.inv okeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433 ) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948) at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processCon nection(Http11Protocol.java:705) at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.j ava:683) at java.lang.Thread.run(Thread.java:534) -Åge ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.F-Secure.com/

2 1

Nav3-Beta9 not collecting data
by kreide＠online.no 04 Feb '05

04 Feb '05

>It seems like the problem only occurs on re-added devices, because all of >the old devices are being updated as they should. I have investigated this problem, and the culprit turned out to be the transition to the new SNMP library. Specifically, the OID tester did not work properly, and that is why this problem only manifested itself for new or re-added devices. Our release coordinator, Morten Vold, is in Oslo this week, but he is back on Monday and we hope to have a new beta 10 release out early next week with this (and a few others) problem sorted out. We are sorry for the inconvenience. -- Kristian

1 0

IP address scope
by woj＠tstd.pl 01 Feb '05

01 Feb '05

Hi, In new NAV beta9 (debian version) IP address scope report still not working? best regards. -- Wojciech (Woj) Kozicki >From odd.hauge at hiMolde.no Thu Feb 3 22:18:49 2005 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Feb 3 22:18:53 2005 Subject: [Nav-users] Nav3-Beta9 not collecting data Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C201A3EA(a)stam.himolde.no> Hi. As mentioned in a previous email, NAV3b9 stopped collecting data after recreating and seeding the database. No swports, gwports, vlan, arp information are collected at all, as far as I can tell. Am I the only one with this problem ? I noticed some others had problem after they re-added devices. The nav-box can still be accessed through ssh if someone in the developer-team wants to take a further look. Regards Odd Arne Hauge

1 0

some adjustments
by kreide＠online.no 01 Feb '05

01 Feb '05

>I tried to re-add some devices, for example a Catalyst 2980 GA >(1.3.6.1.4.1.9.5.51) and a Catalyst 2948 G (1.3.6.1.4.1.9.5.42). >Would some logs be of any interest? If you could send the getDeviceData.log file as well as the IP numbers of the devices in question that would be helpful. -- Kristian

2 2

SV: [Nav-users] some adjustments
by fredrik.holmberg＠luh.hihm.no 31 Jan '05

31 Jan '05

Thank you for helping out here, Kristian :) Restarted NAV with the new getDeviceData.jar, and it has been running for about three hours now. It still seems like NAV is having problems with collecting information about ports and modules. I tried to re-add some devices, for example a Catalyst 2980 GA (1.3.6.1.4.1.9.5.51) and a Catalyst 2948 G (1.3.6.1.4.1.9.5.42). Looked through some tables in the database, where I can find data from other switches, but I can't find any port/module information from those two. Cricket on the other hand collects Memory and SysUptime from them, but no statistics about the ports. Would some logs be of any interest? - Fredrik Holmberg -----Opprinnelig melding----- Fra: Forselv Ketil [mailto:Ketil.Forselv@hin.no] Sendt: 30. januar 2005 22:17 Til: Fredrik Holmberg Kopi: nav-users(a)itea.ntnu.no Emne: RE: [Nav-users] some adjustments I'm also experiencing this (for Cat7200, Cat6509 and Cat3750). Cat2948G and 2980G, which beta 8 couldn't handle, works fine in beta 9. - Ketil Hauge Odd Arne said: > > Yes I'm experiencing this. I thought it was problems with the switch > type... But may be it's not... > > - odd arne hauge > > Fredrik Holmberg said: >> >> After upgrading to Beta 9, re-adding a switch to the database results in >> NAV >> having trouble showing switchports/modules etc. in Report (and Cricket as >> well). It just says "0" on both modules and ports. >> Anyone else experiencing this? >> >>

1 0

some adjustments
by odd.hauge＠hiMolde.no 28 Jan '05

28 Jan '05

Yes I'm experiencing this. I thought it was problems with the switch type... But may be it's not... - odd arne hauge -----Original Message----- After upgrading to Beta 9, re-adding a switch to the database results in NAV having trouble showing switchports/modules etc. in Report (and Cricket as well). It just says "0" on both modules and ports. Anyone else experiencing this?

1 0

NAV Problem with 7206 and 6509
by Jan.Susegg＠hint.no 26 Jan '05

26 Jan '05

After upgrading to NAV 3.0 beta 9 I added a Cisco 7206 router to NAV and NAV doesn't detect any interfaces :( I also added a Cisco 6509 with supervisor card and NAV doesn't detect any router interfaces or switchports and it doesn't extract any vlan information Doesn't NAV 3.0 beta 9 support 7206 and 6509? if it does, what might the problem be? Here are some error messages from getBoksmac.log Jan 26 10:10:40 2005 getBoksData_00 QUERY_NETBOX-6-RUN Now working with(79): levanger-gsw.hint.no (cat6509) (50 of 51 left) Jan 26 10:10:40 2005 getBoksData_00 QUERY_NETBOX-6-GET_OID OID is missing for oidkey: cdpNeighbour Jan 26 10:10:40 2005 getBoksData_00 QUERY_NETBOX-6-GET_OID OID is missing for oidkey: cdpNeighbour Jan 26 12:10:49 2005 getBoksData_01 QUERY_NETBOX-6-PROCESS_CDP cdpList is null for netboxid: 79 OID: null Jan 26 12:10:49 2005 getBoksData_01 QUERY_NETBOX-6-PROCESS_MAC Missing vlanSet for netboxid: 79, aborting Jan 26 12:10:49 2005 getBoksData_22 QUERY_NETBOX-6-RUN Now working with(77): levanger-gw.uninett.no (cis7206) (32 of 51 left) Jan 26 12:10:49 2005 getBoksData_22 QUERY_NETBOX-6-GET_OID OID is missing for oidkey: cdpNeighbour Jan 26 12:10:49 2005 getBoksData_22 QUERY_NETBOX-6-GET_OID OID is missing for oidkey: cdpNeighbour Jan 26 12:10:49 2005 getBoksData_22 QUERY_NETBOX-6-PROCESS_CDP cdpList is null for netboxid: 77 OID: null Jan 26 11:39:08 2005 getDeviceData_00 QUERY_NETBOX_T00-6-RUN Now working with(79): levanger-gsw.hint.no, type=cat6509, ip=xxx.xxx.xxx.xxx (device 51 of 51) Jan 26 11:39:14 2005 getDeviceData_00 ServerPlugin-6-canHandleDevice We cannot serve levanger-gsw.hint.no Jan 26 10:10:55 2005 getBoksData_13 QUERY_NETBOX-5-RUN Link, but no swports, for: (79) levanger-gsw.hint.no If: GigabitEthernet9/4 (33) snmpwalk -On -c xxxxxxx -v 1 levanger-gsw.hint.no 1.3.6.1.2.1 .1.3.6.1.2.1.2.2.1.2.75 = STRING: Vlan1 .1.3.6.1.2.1.2.2.1.2.76 = STRING: EOBC0/0 .1.3.6.1.2.1.2.2.1.2.77 = STRING: Null0 .1.3.6.1.2.1.2.2.1.2.78 = STRING: Loopback0 .1.3.6.1.2.1.2.2.1.2.79 = STRING: Loopback1 .1.3.6.1.2.1.2.2.1.2.81 = STRING: Vlan10 .1.3.6.1.2.1.2.2.1.2.82 = STRING: Vlan15 .1.3.6.1.2.1.2.2.1.2.83 = STRING: Vlan20 .1.3.6.1.2.1.2.2.1.2.84 = STRING: Vlan30 .1.3.6.1.2.1.2.2.1.2.85 = STRING: Vlan32 .1.3.6.1.2.1.2.2.1.2.86 = STRING: Vlan34 .1.3.6.1.2.1.2.2.1.2.87 = STRING: Vlan40 .1.3.6.1.2.1.2.2.1.2.88 = STRING: Vlan50 .1.3.6.1.2.1.2.2.1.2.89 = STRING: Vlan60 .1.3.6.1.2.1.2.2.1.2.90 = STRING: unrouted VLAN 1 .1.3.6.1.2.1.2.2.1.2.91 = STRING: unrouted VLAN 1002 .1.3.6.1.2.1.2.2.1.2.92 = STRING: unrouted VLAN 1004 .1.3.6.1.2.1.2.2.1.2.93 = STRING: unrouted VLAN 1005 .1.3.6.1.2.1.2.2.1.2.94 = STRING: unrouted VLAN 1003 .1.3.6.1.2.1.2.2.1.2.95 = STRING: unrouted VLAN 2 .1.3.6.1.2.1.2.2.1.2.96 = STRING: unrouted VLAN 10 .1.3.6.1.2.1.2.2.1.2.98 = STRING: unrouted VLAN 15 .1.3.6.1.2.1.2.2.1.2.99 = STRING: unrouted VLAN 20 .1.3.6.1.2.1.2.2.1.2.100 = STRING: unrouted VLAN 30 .1.3.6.1.2.1.2.2.1.2.101 = STRING: unrouted VLAN 32 .1.3.6.1.2.1.2.2.1.2.102 = STRING: unrouted VLAN 34 .1.3.6.1.2.1.2.2.1.2.103 = STRING: unrouted VLAN 40 .1.3.6.1.2.1.2.2.1.2.104 = STRING: unrouted VLAN 41 .1.3.6.1.2.1.2.2.1.2.105 = STRING: unrouted VLAN 50 .1.3.6.1.2.1.2.2.1.2.106 = STRING: unrouted VLAN 60 .1.3.6.1.2.1.2.2.1.2.107 = STRING: unrouted VLAN 90 ******************************************************** Jan Susegg F?rstekonsulent, IT-tjenesten H?gskolen i Nord-Tr?ndelag R?stad 7600 LEVANGER tlf: 74022711 mob: 91184451 ********************************************************

1 0

Release-notice: NAV 3.0 beta 9
by odd.hauge＠hiMolde.no 23 Jan '05

23 Jan '05

Hi. I'm still having problem with switches in the Cisco Catalyst 4000 family running Cat-Os. My models are 2948 and 2980. All modules and switchports are not detected by Nav. This worked in previous beta of Nav3, before beta 8 I think.... But in beta9 Nav are now able to get the vlan-id for the detected ports, which Nav couldn't in beta 8. Vlan are not detected for HP5308XL switches. This a layer 3 switch, but no routing interfaces are detected either, and yes they are present. Regards Odd Arne Hauge

1 0

SV: [Nav-users] Release-notice: NAV 3.0 beta 9
by Ketil.Forselv＠hin.no 22 Jan '05

22 Jan '05

> > Hi > > Compiled and install tarbal for Nav 3.0 beta 9 on Redhat 9.0 ..... > > This release solved the problems with collecting data from 2980-switches. but after a while, Nav beta 9 does not collect VLAN and routerports from Cat7200 and Cat6509 :-( Jan 22 19:22:55 2005 getDeviceData QUERY_NETBOX-6-CHECK_RUN_Q Got netbox: narvik-gw.uninett.no Jan 22 19:22:55 2005 getDeviceData QUERY_NETBOX-6-CHECK_RUN_Q Starting new Netbox thread with id: 00 to handle narvik-gw.uninett.no Jan 22 19:22:55 2005 getDeviceData QUERY_NETBOX-6-CHECK_RUN_Q No available netbox, scheduling next check in 4611686018427387903 ms Jan 22 19:22:55 2005 getDeviceData QUERY_NETBOX-6-SCHEDULE_CHECK_RUN_Q Schedule check runq in 4611686018427387903 ms Jan 22 19:22:55 2005 getDeviceData_00 QUERY_NETBOX_T00-6-RUN Thread 00 starting work on (narvik-gw.uninett.no|null) Jan 22 19:22:55 2005 getDeviceData_00 QUERY_NETBOX_T00-6-RUN Now working with(1): narvik-gw.uninett.no, type=cat7200, ip=158.39.0.20 (device 1 of 1) Jan 22 19:22:55 2005 getDeviceData_00 DataContainers-6-ADD_CONTAINER Added container: ModuleContainer Jan 22 19:22:55 2005 getDeviceData_00 DataContainers-6-ADD_CONTAINER Added container: SwportContainer Jan 22 19:22:55 2005 getDeviceData_00 DataContainers-6-ADD_CONTAINER Added container: ModuleMonContainer Jan 22 19:22:55 2005 getDeviceData_00 GwportHandler-6-INIT Dumped gwport in 36 ms Jan 22 19:22:55 2005 getDeviceData_00 DataContainers-6-ADD_CONTAINER Added container: GwportContainer Jan 22 19:22:55 2005 getDeviceData_00 DataContainers-6-ADD_CONTAINER Added container: NetboxContainer Jan 22 19:22:55 2005 getDeviceData_00 DataContainers-6-ADD_CONTAINER Added container: DeviceContainer Jan 22 19:22:55 2005 getDeviceData_00 DNSCHECK_CANHANDLE-6-CHECK_CAN_HANDLE Can handle device: -90 Jan 22 19:22:55 2005 getDeviceData_00 CL3addon_CANHANDLE-6-CHECK_CAN_HANDLE Can handle device: 0 Jan 22 19:22:55 2005 getDeviceData_00 ServerPlugin-6-canHandleDevice We cannot serve narvik-gw.uninett.no Regards Ketil

1 0

Release-notice: NAV 3.0 beta 9
by morten.vold＠ntnu.no 21 Jan '05

21 Jan '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 beta 9 is now available download at http://metanav.ntnu.no/ . We will only be making RPM packages for SuSE Linux Enterprise Server from now on, since this is NTNU's primary server platform nowadays. We do encourage others to build binary packages for their favorite distribution, though. Upgrading from beta 8 ===================== The Java SNMP library now replaces WestHawk SNMP. Please remove your old WestHawk .jar file, download, compile and install Java SNMP 1.4 from http://edge.mcs.drexel.edu/GICL/people/sevy/snmp/snmp_package.html (or get binaries if available). Also, a few Cricket/makecricketconfig changes have taken place (as mentioned in the CHANGES file). The default configuration tree for Cricket needs to be reapplied from the new tarball (a few extra directories and files have been added). In the tarball, it is located at nav-3.0_beta9/subsystem/statTools/cricket/cricket-config/ - in the RPM installation it is found at /usr/local/nav/doc/cricket/cricket-config/ . You don't need to remove your existing generated Cricket config, just copy this files over the existing ones. Also, subtree-sets has been updated and must be overwritten. In the tarball you'll find it as nav-3.0_beta9/subsystem/statTools/cricket/cricket/subtree-sets, in the RPM it is found as /usr/local/nav/doc/cricket/cricket/subtree-sets Rerun makecricketconfig.pl after these changes. CHANGES ======= Version 3.0_beta9 (released 21 January 2005) User-visible changes: * For performance reasons, the WestHawk Java SNMP library has been discarded in favor of Java SNMP, which has a nice GPL license and doesn't hog resources by creating lots of threads. * Machine tracker searches have been redone to be more like in NAV 2, due to the complexity of automatic attempts at correlating CAM and ARP records.1 * Makecricketconfig should now generate correct interface descriptions for router interfaces in Cricket. * The previously disabled Server statistics support of Makecricketconfig has ben re-enabled and fixed. * Start/stop scripts now use "su -" when switching from root to navcron, to reset the environment before starting processes. This may have adverse effects if root has his/her environment variables set to locate NAV libraries while the navcron user doesn't. * The report system should now correctly count the number of gwports registered for a device in NAVdb. * Edit database no longer throws exceptions if NAVdb contains organizations without descriptions. * The default priorities of the web tools have been adjusted. * getDeviceData should no longer come out of sync with NAVdb, as it no longer works on a memory cache of the NAVdb. * getDeviceData no longer deletes prefixes of the 'scope' type (which makes the prefix matrix of the Report system work again). * Improvements to the module monitor of getDeviceData. * Load data is now available in the Traffic map. Known bugs in this version: * getDeviceData will at times seemingly "forget" some IP devices and stop retrieving updated information from them. Until this has been fixed, this can be worked around by restarting getDeviceData, either on a regular basis, or when inconsistencies between NAVdb and the real world are seen. Good luck! - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFB8R36XxIl0kpcOkQRAodWAJwMNR5/qW3yDE1YNQhlmYeeXn/rSACdHdMO klGsqgL2RZmGYpQSKK8vl/s= =CQbM -----END PGP SIGNATURE----- >From Ketil.Forselv at hin.no Fri Jan 21 20:00:58 2005 From: Ketil.Forselv at hin.no (Forselv Ketil) Date: Fri Jan 21 20:01:09 2005 Subject: [Nav-users] Release-notice: NAV 3.0 beta 9 Message-ID: <4147C56944E2B64D978FA0EAB10A14FA4B090D(a)fagserver2.fag.hin.no> Hi Compiled and install tarbal for Nav 3.0 beta 9 on Redhat 9.0 on my test box http://jimmie.hin.no, and everything seems to work fine. (Don't forget to change src/webapps/navAdmin/build.xml line 131 to match your jakarta-tomcat installation) Morten Vold said: > > * Makecricketconfig should now generate correct interface > descriptions for router interfaces in Cricket. Not yet, still get "No description available" This release solved the problems with collecting data from 2980-switches. Regards Ketil > > Good luck! > > > - -- > Morten Vold > NTNU ITEA Integrasjonsgruppen > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.1 (MingW32) > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org > > iD8DBQFB8R36XxIl0kpcOkQRAodWAJwMNR5/qW3yDE1YNQhlmYeeXn/rSACdHdMO > klGsqgL2RZmGYpQSKK8vl/s= > =CQbM > -----END PGP SIGNATURE----- > _______________________________________________ > Nav-users mailing list > Nav-users(a)mailman.itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

1 0

no VLAN information in NAV
by kreide＠online.no 21 Jan '05

21 Jan '05

>Yes, I tried... nothing in Cricket, but NAV itself can list all the interfaces >in report/swport?b1.netboxid=9, but in browse mode, in switchports section >there is nothing. >In report/swport?b1.netboxid=9 >sections: >duplex,media,trunk,vlan,portname,Connected to netbox,Module - empty. So the switch interfaces are indeed listed with ifindex number and speed, but the other fields you mention are empty, is this correct? If this is the case then we would need specific Alcatel support. Does the Alcatel devices support CDP? And are any MAC addresses from them collected? >I dont understand - support in NAV means support in Cricket too? Probably not, however, I am not responsible for Cricket in NAV and thus I do not have complete knowledge of this. -- Kristian

1 0

no VLAN information in NAV
by woj＠tstd.pl 21 Jan '05

21 Jan '05

Dnia pi?tek, 21 stycznia 2005 15:30, Kristian Eide napisa?: > >But... I have whole bunch of alcatel stuff, which is not supported... > > Have you tried? If they use the same OIDs as other device types NAV should > be able to support them. Yes, I tried... nothing in Cricket, but NAV itself can list all the interfaces in report/swport?b1.netboxid=9, but in browse mode, in switchports section there is nothing. In report/swport?b1.netboxid=9 sections: duplex,media,trunk,vlan,portname,Connected to netbox,Module - empty. I dont understand - support in NAV means support in Cricket too? > >PS. What about progress in beta9? > > The plan is to get it out the door by the end of the day. > :) -- Wojciech (Woj) Kozicki

2 1

no VLAN information in NAV
by kreide＠online.no 20 Jan '05

20 Jan '05

>The best solution would be some interface for adding something new devices, >and snmp-specific data for them. So, You want me to send snmpwalk, or just >oids for collecting data from interfaces or cpu? Snmpwalks please (but include the full numeric OID as well). >I haven't got any link that allows any vlan on trunk, but I have static vlans >administration, in VTP the maybe different. Since for most of our trunks this is dynamic we found it easier to handle all trunks in the samme manner, also for the static cases. >=> Running makeinterfaceTargets with dir=router-interfaces <= >Use of uninitialized value in concatenation (.) or string >at /usr/lib/nav/makecricketconfig.pl line 831. I have informed our Cricket responsable of this error. -- Kristian

1 0

no VLAN information in NAV
by woj＠tstd.pl 20 Jan '05

20 Jan '05

Dnia czwartek, 20 stycznia 2005 11:09, John Magne Bredal napisa?: > Wojciech Kozicki wrote: > > Last question, bugfixes (ip prefix scope graph, cricket desc for routers > > etc.) - when? :) > > Hi. > > The description on router-interfaces is found by making a SQL-query by > your own preference and adding this query to the .nav-file in > cricket-config/router-interfaces. Of course this is only possible if you > know the database and thus there exists a default query. And the default > query is not working at the moment :) but in beta9... :) > So a fix for description on router-interfaces: > > Open the file cricket-config/router-interfaces/.nav with your preferred > text-editor (which of course is emacs ;) ), or VIM :-P > and find the line that > starts with descr. Replace the table gwport with gwportprefix in the > query. The next time makecricketconfig.pl runs, it should use this query > to make the description on the router-interfaces. regards -- Wojciech (Woj) Kozicki

1 0

no VLAN information in NAV
by kreide＠online.no 20 Jan '05

20 Jan '05

>Well, but via SNMP you have direct info about trunks, vlans and so on. Maybe >if finding whole chain fails You can always display the vlan number on port, >because it really is true. It doesn't have to be though, many devices will just have the vlan at the default '1' value which is why we have the current solution. >I can provide snmp walk and oids for this, we are running mrtg and rrdtool for >taking stats from linux machines, it is really no problem, mrtg does it >automatically. If you make some interface for this I can try to put some >linux stuff to Nav. Do you have experience with Java programming? If so it should be easy to add yourself. If not please send any SNMP walks and we can try to add it for you. >> However, we cannot display VLAN numbers for trunks >> without actually traversing the whole chain. We can only access the VLANs allowed on the trunk (we already collect this info), but this might be very different from what is actually running (many sites simply allow all VLANs on the trunks). For this reason we try to determine which VLANs are actually active on the trunk. >Last question, bugfixes (ip prefix scope graph, cricket desc for routers etc.) >- when? :) Fixes will be part of the beta9 release, due out shortly (hopefully today or tomorrow). As for the cricket bug you can apply the fix ourself. Edit the file: /usr/share/doc/nav/cricket/cricket-config/router-interfaces/.nav On the line starting with descr = change the SQL statement to: select nettype,netident from gwportprefix left join prefix using (prefixid) left join vlan using (vlan) where gwportid=$id and netident is not null Then run makecricketconfig. -- Kristian

2 1

no VLAN information in NAV
by woj＠tstd.pl 20 Jan '05

20 Jan '05

Dnia czwartek, 20 stycznia 2005 09:50, Kristian Eide napisa?: > You are right that at least some of the problems are related to your > network architecture. NAV tries to build its own view of the network > structure so it can determine exactly which VLANs run on each trunk. This > does require an unbroken chain, however, and in your case we do not support > all parts of the chain. Well, but via SNMP you have direct info about trunks, vlans and so on. Maybe if finding whole chain fails You can always display the vlan number on port, because it really is true. > You can certainly help with adding such support! The data collection > system, getDeviceData, is written in Java. You can look here for docs: > > http://metanav.ntnu.no/javadoc/no/ntnu/nav/getDeviceData/deviceplugins/Devi >ceHandler.html > > > The procedure for adding a new device plugin is relatively straight forward > if you know how to collect the required data from the devices. I would be > happy to extend any assistance in this process. Does the Linux server run > an SNMP daemon which can be queried for the required info? I can provide snmp walk and oids for this, we are running mrtg and rrdtool for taking stats from linux machines, it is really no problem, mrtg does it automatically. If you make some interface for this I can try to put some linux stuff to Nav. > As for the case where you have a normal router -> switch link, which router > is this and what type (I assume you have added it to NAV)? We also make use > of CDP to determine on which port on the router and switch the link is > connected, thus CDP must be enabled and supported on both ends for this to > work. for default I always disable cdp, but I will make some tests today, and will turn it on. Our cisco routers: 7507 7140 7206 > > As for ATM, I don't believe we support this case currently. We would like > to expand our support for such cases of course, but a solution where we > display the VLAN number even if NAV has not been able to verify the chain > might be a good idea. I think so too. > However, we cannot display VLAN numbers for trunks > without actually traversing the whole chain. why? [cut] Last question, bugfixes (ip prefix scope graph, cricket desc for routers etc.) - when? :) regards -- Wojciech (Woj) Kozicki

1 0

problem with prefix scope
by woj＠tstd.pl 19 Jan '05

19 Jan '05

Hi, I'm trying to add prefix scope, I have some subnets belong to this scope in report/prefix, but after lunching /report/matrix it shows nothing. Second - my scope disappears after while from database... what I should check? -- Wojciech (Woj) Kozicki >From kreide at online.no Wed Jan 19 14:09:18 2005 From: kreide at online.no (Kristian Eide) Date: Wed Jan 19 14:09:27 2005 Subject: [Nav-users] no VLAN information in NAV Message-ID: <41EF51B3(a)epostleser.online.no> >well, this is mine main problem - NAV can't see my vlans from cisco 2900, >2900xl Can you see them via SNMP? What does the following command give: snmpwalk -c public <ip> 1.3.6.1.4.1.9.9.68.1.2.2.1.2 -- Kristian

2 1

no VLAN information in NAV
by kreide＠online.no 19 Jan '05

19 Jan '05

> netboxid | vlanid | vlan | sysname | to_netboxid | to_swportid | trunk | >substr Ok, this helps. Can I ask which VLANs are missing on the switches? Where do they originate? NAV starts at the top (at the router) and explores downward, and if it cannot find the starting point the VLAN will not be visible in any reports. Could you give the output of this SQL too with slightly more information? SELECT DISTINCT module.netboxid,typename,gwport.interface,vlanid,vlan.vlan,sysname,gwport.to_n etboxid,gwport.to_swportid,trunk,substr(hexstring,0,3) FROM prefix JOIN vlan USING(vlanid) JOIN gwportprefix ON (prefix.prefixid = gwportprefix.prefixid AND (hsrp='t' OR gwip::text IN (SELECT MIN(gwip::text) FROM gwportprefix GROUP BY prefixid HAVING COUNT(DISTINCT hsrp) = 1))) JOIN gwport USING(gwportid) JOIN module USING(moduleid) JOIN netbox USING (netboxid) JOIN type USING(typeid) LEFT JOIN swport ON (gwport.to_swportid=swportid) LEFT JOIN swportallowedvlan USING (swportid) ORDER BY vlan.vlan; Thank you, I hope we can get this sorted out soon. -- Kristian

1 0

no VLAN information in NAV
by kreide＠online.no 19 Jan '05

19 Jan '05

>Report: (found 0 records) > New count: 0, Update count: 0 Dup count: 0, Rem count: 0 Unused count: 0, >Rename vlan count: 0 The problem is the networkDiscovery module doesn't find any routers to start exploring VLANs from. This is a bit complex to debug, but could you send me the output of: SELECT DISTINCT module.netboxid,vlanid,vlan.vlan,sysname,gwport.to_netboxid,gwport.to_swportid ,trunk,substr(hexstring,0,3) FROM prefix JOIN vlan USING(vlanid) JOIN gwportprefix ON (prefix.prefixid = gwportprefix.prefixid AND (hsrp='t' OR gwip::text IN (SELECT MIN(gwip::text) FROM gwportprefix GROUP BY prefixid HAVING COUNT(DISTINCT hsrp) = 1))) JOIN gwport USING(gwportid) JOIN module USING(moduleid) JOIN netbox USING (netboxid) LEFT JOIN swport ON (gwport.to_swportid=swportid) LEFT JOIN swportallowedvlan USING (swportid) ORDER BY vlan.vlan; Thank you for assisting us in debugging this problem. -- Kristian

2 1

no VLAN information in NAV
by kreide＠online.no 19 Jan '05

19 Jan '05

> module | port | ifindex | vlan | vlanid >--------+------+---------+------+-------- > 1 | | 28 | | > 1 | 2 | 3 | 2 | Thank you. The vlan-number is there, but before it becomes visible on the web the networkDiscovery module needs to "see" it as well. Could you run the command: /usr/lib/nav/networkDiscovery.sh debug vlan And then send me the file: /var/log/nav/networkDiscovery/networkDiscovery-debug.html With this information I should hopefully be able to tell you what is going on. -- Kristian

2 1

no VLAN information in NAV
by kreide＠online.no 19 Jan '05

19 Jan '05

>===== Original Message From woj(a)tstd.pl ===== >ok, changed descriptons on routers according to guide lines and it worked :) >only switches left. Good to hear! Hopefully the switches will also get the vlan set the next time networkDiscovery is run now that it is correct wrt routers. If not, send me the output of: select module,port,ifindex,vlan,vlanid from netbox join module using(netboxid) join swport using(moduleid) left join swportvlan using(swportid) where ip='<ip>'; Where <ip> is the IP of a switch missing VLAN info. -- Kristian

2 2

no VLAN information in NAV
by kreide＠online.no 19 Jan '05

19 Jan '05

>But in logs, that I send you, and in some tables in database I can find some >vlan numbers... Your suggestion is to use these guide lines: >http://metanav.ntnu.no/moin.cgi/SubnetsAndVlans ? We try to find VLAN numbers on a best-effort basis, and for most devices this works. Where it doesn't, you can specify it manually in the interface descrption: see "Guide lines for configuring router interface descriptions" >> Are you able to look at the output written to the console by the applet? >> There it writes the URL it uses to fetch data from the server; if you could >> paste that link into a browser and provide the output it would be very >> helpful in debugging this issue. >In which log I can find this? You need to look at the Java console. On Windows you can find this by right-clicking the Java tray icon. -- Kristian

2 3

no VLAN information in NAV
by kreide＠online.no 19 Jan '05

19 Jan '05

>> snmpwalk -c public <ip> 1.3.6.1.4.1.9.9.68.1.2.2.1.2 >positive You mean it lists the VLANs? Could you copy a couple of lines so I can verify? But NAV should be able to find the VLAN info in that case. Could you give me the output of the following SQL command? select oidkey from snmpoid join netboxsnmpoid using (snmpoidid) join netbox using(netboxid) where ip='<ip>'; Replace <ip> with the IP of one of your devices. -- Kristian

2 1

no VLAN information in NAV
by woj＠tstd.pl 19 Jan '05

19 Jan '05

Dnia ?roda, 19 stycznia 2005 14:09, Kristian Eide napisa?: > snmpwalk -c public <ip> 1.3.6.1.4.1.9.9.68.1.2.2.1.2 positive -- Wojciech (Woj) Kozicki

1 0

no VLAN information in NAV
by woj＠tstd.pl 19 Jan '05

19 Jan '05

Dnia ?roda, 19 stycznia 2005 13:53, Kristian Eide napisa?: > >> We try to find VLAN numbers on a best-effort basis, and for most devices > > > >and what about switches - should I put some descriptons there too? > > This should normally not be necessary; NAV will be able to do this > automatically. well, this is mine main problem - NAV can't see my vlans from cisco 2900, 2900xl -- Wojciech (Woj) Kozicki

1 0

no VLAN information in NAV
by woj＠tstd.pl 19 Jan '05

19 Jan '05

Hi, for me NAV is very good piece of work :) I have plans to use it in my company, but I have some questions. 1. How serious You are about hunting bugs and making new releases? I know, that Morten Werner Olsen and some guys are porting NAV do Debian (I'm using this packet), the feedback is very good so far :) 2. What about cricket bug in Debian - no descriptons in stats for routers interfaces? 3. Vlans... I know, that there is problem with cisco, and info about vlans. Is there a chance that it will be solved? I will try change my interface descripions according to guide lines from nav web, but this is some inconvenience. 4. New release? When? I want to make clean Debian install of NAV, but would be nice if I could make this on some new version. Thanks for developing NAV, best regards -- Wojciech (Woj) Kozicki >From morten.vold at ntnu.no Wed Jan 19 11:25:00 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Wed Jan 19 11:25:03 2005 Subject: SV: [Nav-users] Cheetah compile errors in deviceManagementTemplate.tmpl In-Reply-To: <41EE19A6.1070305(a)ntnu.no> References: <B1272BF7DAE6094E8D302FF90A391808DFBD8C(a)DIGITALIS.hitos.no> <41EE19A6.1070305(a)ntnu.no> Message-ID: <41EE357C.4030503(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Morten Vold wrote: > I will have to investigate further, possibly installing an updated > Cheetah to track down all the errors. So I did. I have checked in r3104 in Subversion, which should fix syntax errors in all the templates that Cheetah 0.9.16 would complain about. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFB7jV8XxIl0kpcOkQRApXaAKCNrp4B5Pa1dbCYyvgXCeKDiPF93ACfYFqd cy05Au8p6uEhjUPCukusQew= =JTo6 -----END PGP SIGNATURE----- >From kreide at online.no Wed Jan 19 13:53:06 2005 From: kreide at online.no (Kristian Eide) Date: Wed Jan 19 13:53:22 2005 Subject: [Nav-users] no VLAN information in NAV Message-ID: <41EF455E(a)epostleser.online.no> >> We try to find VLAN numbers on a best-effort basis, and for most devices >and what about switches - should I put some descriptons there too? This should normally not be necessary; NAV will be able to do this automatically. -- Kristian

1 0

List language
by morten.vold＠ntnu.no 19 Jan '05

19 Jan '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 In light of the recent postings from non-Norwegians, and the fact that NAV is now available to a much larger public, we have come to the conclusion that the primary language of this mailing list should be English, from now on. (If there should be anyone in the Norwegian higher education community that are uncomfortable with this decision, I would suggest lobbying Uninett to establish a similar mailing list for their member institutions - but I would still recommend continued use of this list) - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFB7hjAXxIl0kpcOkQRAoRWAKCI0NpFWQ15K6Kr+TE6HWx6K+gxpQCfbzk/ XGNiQazEGYoMjU0F6xwDTPs= =tbr+ -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Wed Jan 19 09:26:14 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Wed Jan 19 09:26:18 2005 Subject: SV: [Nav-users] Cheetah compile errors in deviceManagementTemplate.tmpl In-Reply-To: <B1272BF7DAE6094E8D302FF90A391808DFBD8C(a)DIGITALIS.hitos.no> References: <B1272BF7DAE6094E8D302FF90A391808DFBD8C(a)DIGITALIS.hitos.no> Message-ID: <41EE19A6.1070305(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Johnsen, ?ge Olai wrote: > Smooth :) > I've tested that. The syntax aint that complicated, so i've changed > some of the source to make it compile. But after the third > change/error i gave up. I see.. taking a closer look, I do see there are more errors that are silently ignored by our version of Cheetah. I will have to investigate further, possibly installing an updated Cheetah to track down all the errors. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFB7hmmXxIl0kpcOkQRAovLAJ4raaVcBNNCaYEJJHisi0NBwmJOIACeLnMN 1Mp+KcAUnIVjJd6LfL/Mq9Y= =czzR -----END PGP SIGNATURE----- >From woj at tstd.pl Wed Jan 19 09:29:12 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 19 09:29:28 2005 Subject: [Nav-users] List language In-Reply-To: <41EE18C0.2030404(a)ntnu.no> References: <41EE18C0.2030404(a)ntnu.no> Message-ID: <200501190929.12561.woj(a)tstd.pl> Dnia ?roda, 19 stycznia 2005 09:22, Morten Vold napisa?: > In light of the recent postings from non-Norwegians, and the fact that > NAV is now available to a much larger public, we have come to the > conclusion that the primary language of this mailing list should be > English, from now on. > > > (If there should be anyone in the Norwegian higher education community > that are uncomfortable with this decision, I would suggest lobbying > Uninett to establish a similar mailing list for their member > institutions - but I would still recommend continued use of this list) Very good idea. The archives will be usable for people from other countries... :) best regards -- Wojciech (Woj) Kozicki

1 0

Cheetah compile errors in deviceManagementTemplate.tmpl
by morten.vold＠ntnu.no 19 Jan '05

19 Jan '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Johnsen, ?ge Olai wrote: > Cheetah 0.9.16a1 [...] > Cheetah.Parser.ParseError: > > #end if found, expected #end def at line 362, column 1 in file > deviceManagementTemplate.tmpl Good catch! Our development server runs Cheetah 0.9.15, which, for some strange reason, silently ignores this syntax error. In other words: It works for us ;-) I'll be checking in a fix for this shortly - just remove line 361 (or comment it out) from deviceManagementTemplate.tmpl and try again. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFB7hY6XxIl0kpcOkQRAm+jAJwLlbiYke9DxHPIvkDw9m/Lbe3bVgCfeupT s613eX7nASNvMmy58lfBGWM= =SERo -----END PGP SIGNATURE----- >From Aage.Olai.Johnsen at hitos.no Wed Jan 19 09:25:38 2005 From: Aage.Olai.Johnsen at hitos.no (Johnsen, Åge Olai) Date: Wed Jan 19 09:22:13 2005 Subject: SV: [Nav-users] Cheetah compile errors in deviceManagementTemplate.tmpl Message-ID: <B1272BF7DAE6094E8D302FF90A391808DFBD8C(a)DIGITALIS.hitos.no> Smooth :) I've tested that. The syntax aint that complicated, so i've changed some of the source to make it compile. But after the third change/error i gave up. I've also tested compiling the file with cheetah 0.9.15 with python 2.2.2 on a another box, and it runs smoothly there. (silently ignores the errors) Error #2, after editing line 362; Line|Line contents ----|------------------------------------------------------------- 745 |#for $value,$option in $args['orgList'] 746 | <option value="$value">$option</option> 747 |#end if 748 | </select> ^ 749 | </td> 750 | <td><input type="text" name="cn_retailer"></td> 751 | <td><input type="text" name="cn_ordernr"></td> And so on.. -Åge > -----Opprinnelig melding----- > Fra: Morten Vold [mailto:morten.vold@ntnu.no] > Sendt: 19. januar 2005 09:12 > Til: Johnsen, Åge Olai > Kopi: nav-users(a)itea.ntnu.no > Emne: Re: [Nav-users] Cheetah compile errors in > deviceManagementTemplate.tmpl > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Johnsen, Åge Olai wrote: > > > Cheetah 0.9.16a1 > [...] > > Cheetah.Parser.ParseError: > > > > #end if found, expected #end def at line 362, column 1 in file > > deviceManagementTemplate.tmpl > > Good catch! Our development server runs Cheetah 0.9.15, > which, for some > strange reason, silently ignores this syntax error. In other > words: It > works for us ;-) > > I'll be checking in a fix for this shortly - just remove line 361 (or > comment it out) from deviceManagementTemplate.tmpl and try again. > > - -- > Morten Vold > NTNU ITEA Integrasjonsgruppen > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.1 (MingW32) > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org > > iD8DBQFB7hY6XxIl0kpcOkQRAm+jAJwLlbiYke9DxHPIvkDw9m/Lbe3bVgCfeupT > s613eX7nASNvMmy58lfBGWM= > =SERo > -----END PGP SIGNATURE----- > > ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.F-Secure.com/

1 0

no VLAN information in NAV
by woj＠tstd.pl 18 Jan '05

18 Jan '05

Dnia wtorek, 18 stycznia 2005 10:31, Kristian Eide napisa?: [cut] > >In VlanPlot I have 4 routers (I didnt include all routers in NAV), after > >clicking one of them there is always an error: > >"An error occured fetching data from server > I just checked - it started to work, I dont know why, I didn't change NAV config, but today we have some big config changes on that router (deleting some int, adding some int)... best regards :) -- Wojciech (Woj) Kozicki

1 0

no VLAN information in NAV
by woj＠tstd.pl 18 Jan '05

18 Jan '05

Dnia wtorek, 18 stycznia 2005 10:31, Kristian Eide napisa?: > >In /editdb/prefix/edit/ if I will take some prefix, implicitly put some > > VLAN number to it, then in Vlan Plot, and some other toolbox stuff this > > Vlan will be visible. But this is not automatic process. > > This is a well-known issue with some Cisco devices; unfortunately we have > not (yet) found a way to fetch the vlan numer via SNMP. > > We have the vlan number as part of the router interface description and NAV > is able to parse this. Could you do something similar? I admit this is not > an ideal situation, however, and we are looking for a better way. > But in logs, that I send you, and in some tables in database I can find some vlan numbers... Your suggestion is to use these guide lines: http://metanav.ntnu.no/moin.cgi/SubnetsAndVlans ? > >In VlanPlot I have 4 routers (I didnt include all routers in NAV), after > >clicking one of them there is always an error: > >"An error occured fetching data from server > > Are you able to look at the output written to the console by the applet? > There it writes the URL it uses to fetch data from the server; if you could > paste that link into a browser and provide the output it would be very > helpful in debugging this issue. In which log I can find this? -- Wojciech (Woj) Kozicki

1 0

no VLAN information in NAV
by woj＠tstd.pl 17 Jan '05

17 Jan '05

Hi! I am testing NAV (Debian package by Morten Werner Olsen), using the lastest NAV debian package. nav:~# dpkg -l | grep nav ii nav 2+3.0beta8-0pr Network Administration Visualized I have _big_ problems with getting information about vlans, - vanPlot shows some routers, and connections, but vlan number is "-1" on every connection after clicking on one of routers I get error: "An error occurred fetching data from server 2 " - Report module after searching "Switchports with vlan" I always get nothing. in getBoksMacs.log I have: [cut] Jan 13 14:10:10 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Fetching vlan: 1 Jan 13 14:10:10 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Querying vlan: 1, MACs: 2 Mappings: 1 Blocked: 0 / 0 Jan 13 14:10:10 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY MAC: 0030b6c23881 (0.48.182.194.56.129) (null) found at index: 16, but no ifIndex mapping exists. Jan 13 14:10:10 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Fetching vlan: 2 Jan 13 14:10:11 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Fetching vlan: 3 Jan 13 14:10:12 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Fetching vlan: 4 Jan 13 14:10:12 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Fetching vlan: 5 Jan 13 14:10:12 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Fetching vlan: 6 [cut] Jan 13 14:10:26 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY MAC: 00809f26009f (0.128.159.38.0.159) (null) found at index: 1, but no ifIndex mapping exists. [cut] Jan 13 14:10:26 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY MACs found on 11 / 27 VLANs, units on 0. Jan 13 14:10:26 2005 getBoksData null-6-RUN ** Thread done, time used: 00:00:22.498, waiting for [] ** in database: manage-# select * from swport; gives me 60 rows select * from netbox_vtpvlan; netboxid | vtpvlan ----------+--------- 1 | 200 1 | 3 1 | 203 1 | 14 1 | 1 [cut] so... I have these information in database, but I can see them via WWW. Please, tell me which logs I should check, I will provide any information, beacuse have no idea what is wrong... My seconf question is: After adding new ip-device, what should be done, to make cricket show all the stats? best regards -- Wojciech (Woj) Kozicki >From Aage.Olai.Johnsen at hitos.no Mon Jan 17 15:15:10 2005 From: Aage.Olai.Johnsen at hitos.no (Johnsen, Åge Olai) Date: Mon Jan 17 15:11:52 2005 Subject: [Nav-users] Cheetah compile errors in deviceManagementTemplate.tmpl Message-ID: <B1272BF7DAE6094E8D302FF90A391808DFBD80(a)DIGITALIS.hitos.no> Hi there. Trying to get this to work on Slackware 10.0, and things seem to be working fine until the Cheetah compilation of the templates. I had some troubles with Cheetah on slackware, but thanks to Cheetah mailinglist it seems to be fixed. (the _namemapper.so part) http://sourceforge.net/mailarchive/forum.php?thread_id=6365639&forum_id=1542 The `cheetah test` works fine now. Relevant systeminfo: Slackware 10.0 Python 2.3.4 Cheetah 0.9.16a1 Then to the nav part.. ./configure works fine, but it halts on this part in the "make'ing". To my untrained eye it looks like syntaxerrors? A `cheetah compile subsystem/deviceManagement/src/deviceManagementTemplate.tmpl` gives the same errors. ###################################################### make[2]: Entering directory `/home/source/nav-3.0_beta8/subsystem/deviceManagement/src' /usr/bin/cheetah compile deviceManagementTemplate.tmpl Compiling deviceManagementTemplate.tmpl -> deviceManagementTemplate.py Traceback (most recent call last): File "/usr/bin/cheetah", line 3, in ? CheetahWrapper().main() File "/usr/lib/python2.3/site-packages/Cheetah/CheetahWrapper.py", line 480, in main meth() File "/usr/lib/python2.3/site-packages/Cheetah/CheetahWrapper.py", line 410, in compile self.compileOrFill() File "/usr/lib/python2.3/site-packages/Cheetah/CheetahWrapper.py", line 403, in compileOrFill self.compileOrFillBundle(b) File "/usr/lib/python2.3/site-packages/Cheetah/CheetahWrapper.py", line 248, in compileOrFillBundle output = str(obj) File "/usr/lib/python2.3/site-packages/Cheetah/Compiler.py", line 1379, in moduleDef self.compile() File "/usr/lib/python2.3/site-packages/Cheetah/Compiler.py", line 1178, in compile self._parser.parse() File "/usr/lib/python2.3/site-packages/Cheetah/Parser.py", line 1051, in parse self.eatDirective() File "/usr/lib/python2.3/site-packages/Cheetah/Parser.py", line 1168, in eatDirective self._directiveEaters[directiveKey]() File "/usr/lib/python2.3/site-packages/Cheetah/Parser.py", line 1193, in eatEndDirective self._directiveEndEaters[directiveKey]( File "/usr/lib/python2.3/site-packages/Cheetah/Parser.py", line 1783, in eatEndIf self.eatDedentDirective('if', isLineClearToStartToken) File "/usr/lib/python2.3/site-packages/Cheetah/Parser.py", line 1777, in eatDedentDirective self.popFromIndentStack(directiveKey) File "/usr/lib/python2.3/site-packages/Cheetah/Parser.py", line 1810, in popFromIndentStack raise ParseError(self, msg="#end %s found, expected #end %s" %( Cheetah.Parser.ParseError: #end if found, expected #end def at line 362, column 1 in file deviceManagementTemplate.tmpl Line|Line contents ----|------------------------------------------------------------- 359 |#end for 360 |</table> 361 |#end if 362 |#end def ^ 363 | 364 |#def makeSubMenu($menu) 365 |<br> make[2]: *** [deviceManagementTemplate.py] Error 1 make[2]: Leaving directory `/home/source/nav-3.0_beta8/subsystem/deviceManagement/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/source/nav-3.0_beta8/subsystem/deviceManagement' make: *** [all] Error 1 ################################################## -Åge ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.F-Secure.com/

2 1

Cisco catalyst 2970 & 3750
by roar.pettersen＠it.uib.no 07 Jan '05

07 Jan '05

Hei ! Holder p? med NAV3 og ser at NAv3 ikke klarer ? finne serie nr til catalyst 2970 & 3750 oid'en har tydeligvis blitt endrett p? disse to "nye" switchen : .1.3.6.1.2.1.47.1.1.1.1.11.1001 H?per at dere har mulighet ? f? dette med i beta9 ? Lurer ogs? p? om det blir samlett inn sw versjoner fra switchene, slik som det var i NAV 2 ? Klarer hvertfall ikke ? finne slik informasjon i de raportene som finnes. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From peder.sefland at hivolda.no Fri Jan 14 10:58:59 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Fri Jan 14 10:59:12 2005 Subject: [Nav-users] =?iso-8859-1?q?VS=3A_tomcat4_feilmelding_ved_apt?= =?iso-8859-1?q?-get_upgrade_for_nav3_p=E5_debian?= Message-ID: <s1e7a5fb.019(a)HVO-3.hivolda.no> Jeg fant ut av det. L?sningen var ? kj?re cp /usr/share/java/webapps/navAdmin.war /var/lib/tomcat4/webapps/ siden disse hadde blitt overskrevet av apt-get upgrade + /etc/default/tomcat4 restart Peder >>> Peder Magne Sefland 13.01.2005 11:45:21 >>> Godt nytt?r. M?tte det bli et ?r med en stabil nav :-) N?r jeg kj?rte apt-get upgrade p? nav-boksen kom denne feilmeldingen Preparing to replace tomcat4 4.1.30-6 (using .../tomcat4_4.1.31-2_all.deb) ... Stopping Tomcat 4.1 servlet engine: .........tomcat4. Unpacking replacement tomcat4 ... dpkg: error processing /var/cache/apt/archives/tomcat4_4.1.31-2_all.deb (--unpack): trying to overwrite `/usr/share/tomcat4/webapps', which is also in package nav Starting Tomcat 4.1 servlet engine using Java from /usr/lib/j2sdk1.4-sun: tomcat4. Errors were encountered while processing: /var/cache/apt/archives/tomcat4_4.1.31-2_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Jeg fikk problem med en annen nav-vmware installasjon som jeg hadde laget automatisk updatering via en cron-jobb p? apt-get. Kanskje det var dette som rotet til den ogs?? Peder Fungerer varsling p? mail og sms med deg?

1 0

SV: Re: [Nav-users] database export/import fra beta7 til beta8
by morten.vold＠ntnu.no 21 Des '04

21 Des '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Peder Magne Sefland wrote: > F?r jeg starter nav p? beta8 med importert database, kj?rte jeg [...] > psql:3.0_beta8.sql:52: NOTICE: ALTER TABLE / ADD UNIQUE will create > implicit in dex "netbox_deviceid_key" for table "netbox" > psql:3.0_beta8.sql:52: ERROR: relation "netbox_deviceid_key" already > exists Finding duplicate device references in module > psql:3.0_beta8.sql:61: ERROR: current transaction is aborted, > commands ignored until end of transaction block Her har oppgraderingsscriptet allerede feilet, og derfor blir ingenting av skjema-oppgraderingen gjennomf?rt. Mitt sp?rsm?l til deg blir: Hvorfor har du allerede indeksen "netbox_deviceid_key" i databasen din? Har du kj?rt 3.0_beta8.sql p? beta7-installasjonen din f?r du dumpet databasen? Eller har noen tidligere p? nav-users tipset deg om ? gj?re noen endringer direkte i databasen (noe a la: ALTER TABLE netbox ADD CONSTRAINT netbox_deviceid_key UNIQUE(deviceid)) ? > Etter ? starte nav, tok jeg en nav status. Denne viste at > servicemonitor ikke kj?rer etter importen. Den kj?rte f?r. Det har ingen hensikt ? pr?ve ? starte NAV 3.0_beta8 f?r databasen er oppgradert, s? dette tror jeg ikke jeg skal si noe om f?r vi er sikre p? at databasen din er riktig. - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFByBVLXxIl0kpcOkQRAj1XAJ4g/vEr6U8Uiaom/bMRLJh7EBSs4wCg5JNW Xj1VT2JeI6cj6+ddK9dJuc8= =+30z -----END PGP SIGNATURE-----

1 0

database export/import fra beta7 til beta8
by werner＠skolelinux.no 21 Des '04

21 Des '04

On Tue, Dec 21, 2004 at 11:52:30AM +0100, Peder Magne Sefland wrote: > Etter ? starte nav, tok jeg en nav status. Denne viste at > servicemonitor ikke kj?rer etter importen. Den kj?rte f?r. Og hva sier loggfila di (/var/lib/nav/log/servicemon.log)? - Werner >From peder.sefland at hivolda.no Tue Dec 21 12:22:00 2004 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Tue Dec 21 12:22:37 2004 Subject: SV: Re: [Nav-users] database export/import fra beta7 til beta8 Message-ID: <s1c81589.073(a)HVO-3.hivolda.no> >>> Morten Werner Olsen <werner(a)skolelinux.no> 21.12.2004 11:57:33 >>> On Tue, Dec 21, 2004 at 11:52:30AM +0100, Peder Magne Sefland wrote: > Etter ? starte nav, tok jeg en nav status. Denne viste at > servicemonitor ikke kj?rer etter importen. Den kj?rte f?r. Og hva sier loggfila di (/var/lib/nav/log/servicemon.log)? Har klipt ut logg fra dagen f?r og den siste hendelsen [2004-12-20 11:47:28] db.py:query:107 [Debug] Executing: SELECT serviceid ,service.netboxid, netbox.deviceid, service.active, handler, version, ip, sysname, service.up FROM service JOIN netbox ON (service.netboxid=netbox.netboxid) order by serviceid [2004-12-20 11:47:28] db.py:getCheckers:249 [Notice] Returned 0 checkers [2004-12-20 11:47:28] servicemon.py:main:146 [Notice] Garbage: [] Objects: 7798 Threads: 2 [2004-12-20 11:47:28] servicemon.py:main:149 [Notice] Waiting 59 seconds. [2004-12-20 11:48:28] db.py:query:107 [Debug] Executing: SELECT serviceid, property, value FROM serviceproperty order BY serviceid [2004-12-21 11:41:29] db.py:query:107 [Debug] Executing: SELECT serviceid ,service.netboxid, netbox.deviceid, service.active, handler, version, ip, sysname, service.up FROM service JOIN netbox ON (service.netboxid=netbox.netboxid) order by serviceid [2004-12-21 11:41:29] db.py:getCheckers:249 [Notice] Returned 0 checkers [2004-12-21 11:41:29] servicemon.py:main:146 [Notice] Garbage: [] Objects: 7798 Threads: 2 [2004-12-21 11:41:29] servicemon.py:main:149 [Notice] Waiting 59 seconds. [2004-12-21 11:42:04] servicemon.py:signalhandler:160 [Notice] Caught SIGTERM. Exiting. [2004-12-21 11:42:04] RunQueue.py:terminate:195 [Notice] Waiting for threads to terminate... [2004-12-21 11:42:04] RunQueue.py:terminate:198 [Notice] All threads have finished Det ver vel p? de 3 siste linjene det skjerer seg. Peder

1 0

database export/import fra beta7 til beta8
by peder.sefland＠hivolda.no 21 Des '04

21 Des '04

Jeg har en ganske bra fungerende nav3beta7 hvor alle ip-devicene ligger inne. Har n? satt opp en maskin til som kj?rer beta8. Hadde h?pet at jeg kunne exportere databasen fra beta7 og importere den i beta8. Jeg exporterte med su - postgres pg_dumpall > /tmp/navdb.sql Har flyttet databasen over til den nye maskinen, men er usikker p? hvordan jeg skal importere databasen, siden det sikker er gjort endringer i skjemaene fra beta7 til beta8. Men jeg finner ingen /usr/share/doc/nav/sql/upgrades/3.0_beta8.sql i beta8 pakken (debian) Har noen noe tips? Peder

2 1

Problemer med gDD
by Borge.Brunes＠cc.uit.no 13 Des '04

13 Des '04

Takk for svaret Vidar. Jeg begynte og lure p? om lista var d?d... Vidar.Faltinsen(a)uninett.no said: > H?per Kristian kan kommentere ?vrige ting du hadde her. Han har verdt ? > merke kommet en del kvantesprang lengre p? gDD, s? ny beta kommer nok snart. Er det lov til ? h?pe p? at ny beta kommer f?r jul? Hva med ? lage en "snapshot" av nav hver natt som gj?res tilgjengelig for oss som ?nsker ? kj?re "bleeding edge". Ut?lmodig som jeg er s? synes jeg at det g?r for lang tid mellom hver gang det slippes ny betarelease. Savnet etter ? f? v3 i produksjon er stor fordi v2 har manglende st?tte for nye boxe-typer. Hvor langt unna er NTNU kommet flyttingen over til v3? mvh. -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

2 1

Problemer med gDD
by Borge.Brunes＠cc.uit.no 13 Des '04

13 Des '04

Det virker som om gDD har problemer med bokser av typen "lag tre switcher" (f.eks. 3550, 3750 ol.) Har lagt inn et par stk. av hver type for ? se hva det er som g?r galt: * 3550-12G I DeviceBrowser s? mangler f?lgende: Availability Unknown Vlan Unknown Gateway Unknown Uplink Unknown Dersom jeg tar turen til Network explorer s? er alle vlan der, samt L3-interfacer. I getDeviceData-loggen dukker f?lgende meldinger opp: CGW_DEVHANDLER-4-CGW_MATCH-MODULE Module 0 does not exist on netbox nfh-gsw.infra.uit.no, default to 1 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Loopback0 CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan142 (gjelder alle vlanene) I tillegg s? sender den meldinger til eventq om coldstart noe som ikke er tilfelle. * 3750G-12S Her raser det inn meldinger av typen: Module down, tmu-gsw.infra.uit.no, 1, 0, 1.3.6.1.2.1.2.2.1.1.0, null, [] Info i DeviceBrowser er like mangelfull som for 3550-12G: Availability Unknown Vlan Unknown Gateway Unknown Uplink Unknown og feilmeldinger(?) er lik: MIB_II_SW_DEVHANDLER-6-MODULE_MON Module 1, ifindex 0 on tmu-gsw.infra.uit.no returned no values CGW_DEVHANDLER-4-CGW_MATCH-MODULE Supervisor not found and could not match module pattern to if: Vlan149 (gjelder alle vlanene) Samme problemer gjelder ogs? for 4506, c6k sup720, c6k sup2 I tillegg s? virker det som om moduler kommer og g?r p? boksene eks.: IOS_DEVHANDLER-4-PROCESS_IOS Module 6 (FastEthernet6) does not exist on netbox mh-gsw2.infra.uit.no, skipping (denne modulen finnes p? boksen med #5) Finner ikke memory for noen devicer i det hele tatt. ?nsker dere ? ta en n?rmere titt i loggende s? er passord samme som det altid har v?rt. Et spml. helt til slutt: Vi har en del switcher (f.eks. 3550-48) som kan kj?re som rutere, men som ikke gj?r det. Skal man da sette type SW el. GSW p? disse? I NAV v2 s? m?tte man sette type GSW p? disse, men det er ikke ?nskelig. mvh. -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

2 1

Problemer med getDeviceData
by Borge.Brunes＠cc.uit.no 01 Des '04

01 Des '04

[kj?rer beta8] Jeg plages med at getDeviceData "henger" (ikke stopper) under kj?ring. Er det noen m?te ? f? scriptet til ? kj?re med bare en tr?d for lettere ? finne ut hvilken boks som er problemet? mvh. -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

1 0

vlanPlot
by Jan.Susegg＠hint.no 30 Nov '04

30 Nov '04

Skipped content of type multipart/alternative

1 0

NAV i FreeBSD ports
by anders＠bsdconsulting.no 23 Nov '04

23 Nov '04

Hei, Etter ? ha puslet med NAV en stund i samarbeid med Universitetet i Troms? og Bergen, har jeg da i dag lagt en port av NAV i FreeBSD sin ports-samling. Test i vei den som m?tte v?re interessert, vi tar veldig gjerne imot tilbakemeldinger fra andre som er interessert i ? bruke/teste NAV i FreeBSD. Porten er ? se p? som work-in-progress forel?pig, men tjenestene ser ut til for det meste ? kj?re iallfall. For ? installere og sette systemet opp er det bare ? oppdatere ports og kj?re: cd /usr/ports/net-mgmt/nav make install make auto-config Avhengigheter installeres automatisk, auto-config (valgfri) setter opp database og shell environment. Filene i porten kan browses p? http://cvsweb.freebsd.org/ports/net-mgmt/nav/. JDK kan dog v?re grei ? installere som package for ? spare tid. Har f?lgende tilbakemeldinger om ting som burde rettes eller iallfall tas i betraktning av utviklerne: - avhengigheter. Det er fordelaktig med et begrenset, veldefinert utvalg av avhengigheter n?r systemet skal installeres av andre enn utviklerne selv. :-) Synes ikke det virker som om dere tenker s? mye p? det. ?nsker dere at NAV kun skal v?re til Linux, eller ?nsker dere at systemet skal v?re portabelt? - filene subsystem/lib-python/src/nav/db/navprofiles.py og subsystem/lib-python/src/nav/db/forgotten/manage.py mangler Python encoding-informasjon. - CLASSPATH i src/Makefile.in m?tte rettes her, for at make skulle ta med src-katalogen i nav-pakken (jfr. patch files/patch-src-Makefile.in). - bruk av ps-kommandoen i subsystem/alertEngine/alertdaemon.pl m?tte rettes (jfr. patch patch-subsystem-alertEngine-alertdaemon.pl). - fullmask = 0xFFFFFFFF gir warning om endringer i neste versjon av Python. FreeBSD har Python 2.3.4 som gjeldende Python-versjon, og denne warningen dukker da opp i cron-mailer. Rettet til 0xFFFFFFFFL (jfr. patch files/patch-subsystem-lib-python-src-nav-ip.py). - subsystem/startstop/functions.in krever /proc. Ikke alle bruker eller ?nsker ? bruke proc-filsystem. Foresl?r at dere heller tester p? ps-output eller returkode fra ps (jfr. patch files/patch-subsystem-startstop-functions.in). Bruken av pidof burde kanskje ogs? revurderes? Fant ikke noen pidof til FreeBSD som st?tter de argumentene/opsjonene som brukes iallfall. Jeg kan sikkert se om jeg finner et passende alternativ om ?nskelig. - subsystem/startstop/startstop.py kan med fordel sette PATH, da gjerne med /usr/local/bin f?rst. Dette da FreeBSD ikke har Python og andre avhengigheter i standard cron PATH (jfr. patch files/patch-subsystem-startstop-startstop.py). PS: Som en f?lge av dette med NAV, har jeg ogs? v?rt n?dt til ? legge inn avhengigheter som ports/databases/py-forgetsql, ports/www/py-forghtml og java/westhawksnmp i ports-samlingen, ettersom de ikke var der fra f?r av. En retting til ports/databases/py-psycopg (PostgreSQL-st?tte til Python) er p? vei, slik at den kan brukes som en avhengighet. Inntil videre (venter p? respons fra psycopg ports-maintaineren) m? vedlagt patch benyttes om en ikke ?nsker ? installere py-psycopg manuelt. Regner med vi kommer tilbake med flere tilbakemeldinger etterhvert. :-) Mvh, -- Anders.

2 1

SV: [Nav-users] NAV 3.0 beta8 - Debian-pakke
by peder.sefland＠hivolda.no 15 Nov '04

15 Nov '04

Jeg har pr?vd ? kj?re en apt-get upgrade 2 ganger. Med vmware s? er det enkelt ? spole tilbake n?r ting skj?rer seg. Her utklipp av de feilmeldingene som kommer ved oppgraderingen. Si gjerne ifra n?r du vil at jeg skal pr?ve ? gj?re en ny oppgradering. Peder Preparing to replace nav 2+3.0beta7-0pre40 (using .../nav_2+3.0beta8-0pre1_i386.deb) ... Stopping Network Administration Visualized: Services: eventEngine.sh servicemon.py smsd.pl getDeviceData.sh pping.pystart-stop-daemon: warning: failed to kill 883: No such process Cron-jobs: Stopping networkDiscovery: Ok Stopping cricket: Ok Stopping iptrace: Ok Stopping maintengine: Ok Stopping thresholdMon: Ok Stopping mactrace: Ok Stopping logengine: Ok Stopping safe_smsd: Ok Stopping backup: Ok . Unpacking replacement nav ... dpkg: warning - unable to delete old file `/usr/lib/python2.3/site-packages/nav/web/devBrowser': Directory not empty dpkg: warning - unable to delete old file `/usr/lib/python2.3/site-packages/nav/web': Directory not empty dpkg: warning - unable to delete old file `/usr/lib/python2.3/site-packages/nav': Directory not empty Preparing to replace ppp 2.4.2+20040428-2 (using .../ppp_2.4.2+20040428-5_i386.deb) ... Unpacking replacement ppp ... Setting up nav (2+3.0beta8-0pre1) ... Installing new version of config file /etc/nav/alertmsg.conf ... Installing new version of config file /etc/nav/editdb.conf ... Installing new version of config file /etc/nav/report/front.html ... Configuration file `/etc/nav/report/report.conf' ==> Modified (by you or by a script) since installation. ==> Package distributor has shipped an updated version. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : background this process to examine the situation The default action is to keep your current version. *** report.conf (Y/I/N/O/D/Z) [default=N] ? Y Installing new version of config file /etc/nav/report/report.conf ... Starting Network Administration Visualized: Services: eventEngine.sh servicemon.pyTraceback (most recent call last): File "/usr/lib/nav/servicemon.py", line 44, in ? from nav.statemon import RunQueue ImportError: No module named nav.statemon (failed) smsd.plCan't locate NAV.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/lib/nav/smsd.pl line 59. BEGIN failed--compilation aborted at /usr/lib/nav/smsd.pl line 59. (failed) getDeviceData.sh pping.pyTraceback (most recent call last): File "/usr/lib/nav/pping.py", line 36, in ? from nav.statemon import rrd ImportError: No module named nav.statemon (failed) alertdaemon.plCan't locate Engine.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/lib/nav/alertdaemon.pl line 39. BEGIN failed--compilation aborted at /usr/lib/nav/alertdaemon.pl line 39 (#1) (F) You said to do (or require, or use) a file that couldn't be found. Perl looks for the file in all the locations mentioned in @INC, unless the file name included the full path to the file. Perhaps you need to set the PERL5LIB or PERL5OPT environment variable to say where the extra library is, or maybe the script needs to add the library name to @INC. Or maybe you just misspelled the name of the file. See perlfunc/require and lib. Uncaught exception from user code: Can't locate Engine.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/lib/nav/alertdaemon.pl line 39. BEGIN failed--compilation aborted at /usr/lib/nav/alertdaemon.pl line 39. (failed) Cron-jobs: Fatal error: Could not find the nav.startstop module. Is your PYTHONPATH environment correctly set up? invoke-rc.d: initscript nav, action "start" failed. Setting up ppp (2.4.2+20040428-5) ... Installing new version of config file /etc/ppp/ipv6-up ... >>> Morten Werner Olsen <werner(a)skolelinux.no> 12.11.2004 09:04:20 >>> Hallo! Da har jeg laget en Debian-pakke av NAV beta8. Pakken ligger p? samme sted som den alltid har gjort [1], og jeg antar at installasjons- manualen [2] ogs? fungerer. Se ogs? [3] for mer info om pakken. Jeg har ingen maskiner ? teste denne p?, s? for ? forbedre den er jeg avhengig at noen som tester og gir meg tilbakemelding p? feil og andre ting som kan/b?r forbedres (b?de i selve pakken og i installasjons- manualen). :) - Werner [1] http://skolelinux.no/~werner/debian/pool/unstable/n/nav/ [2] http://skolelinux.no/~werner/nav/install-howto.txt [3] http://skolelinux.no/~werner/nav/ _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

NAV 3.0 beta8 - Debian-pakke
by werner＠skolelinux.no 12 Nov '04

12 Nov '04

Hallo! Da har jeg laget en Debian-pakke av NAV beta8. Pakken ligger p? samme sted som den alltid har gjort [1], og jeg antar at installasjons- manualen [2] ogs? fungerer. Se ogs? [3] for mer info om pakken. Jeg har ingen maskiner ? teste denne p?, s? for ? forbedre den er jeg avhengig at noen som tester og gir meg tilbakemelding p? feil og andre ting som kan/b?r forbedres (b?de i selve pakken og i installasjons- manualen). :) - Werner [1] http://skolelinux.no/~werner/debian/pool/unstable/n/nav/ [2] http://skolelinux.no/~werner/nav/install-howto.txt [3] http://skolelinux.no/~werner/nav/ >From Ketil.Forselv at hin.no Sat Nov 13 20:38:06 2004 From: Ketil.Forselv at hin.no (Forselv Ketil) Date: Sat Nov 13 20:38:19 2004 Subject: [Nav-users] NAV 3.0 og Tomcat Message-ID: <4147C56944E2B64D978FA0EAB10A14FA4B07E0(a)fagserver2.fag.hin.no> Hei Morten Etter hjelp fra deg er n? alt i orden med Tomcat og Nav 3.0. L?sninga ble fra /usr/java/j2sdk1.4.2_05/jre/lib/ext/ og legge inn f?lgende symlink: ln -s /usr/local/nav/lib/java/*.jar . Etter oppgraderinger tar Nav'en ogs? uten problemer linux-bokser med netsnmp som vi har et par stykker av for NAT'ing. Det eneste som ikke er helt p? G er innsamlingen fra 3750-boksen (hin-gsw), som gj?r at i browsing p? denne i Vlanplot (http://nav3.hin.no) gir "an error occured fetching data from server". mvh Ketil

1 0

Release-notice: NAV 3.0 beta 8
by kreide＠online.no 10 Nov '04

10 Nov '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > >> Problemene jeg har med at getDeviceData ikke klarer ? avlede Vlan for > Kristian tar kanskje kontakt direkte med sine sp?rsm?l ? Hei. Vidar skrev noe om dette tidligere i ?r: "1. Problemer med molde-sw.himolde.no (Catalyst 4506) Litt bakgrunnsinfo. UNINETTs ruter i Molde (molde-gw.uninett.no) fungerer som en ren transitt ruter. All lokal ruting i Molde foreg?r p? molde-sw.himolde.no, som er en catalyst 4506 med en lag 3 supervisor. Mellom molde-gw og molde-sw er det to 100 mbps linknett. Mao. s? er det to default ruter definert p? molde-sw.himolde.no. Over det ene linknettet kj?res ogs? ipv6. Dessverre st?tter ikke cat4K ipv6. Det ble derfor etablert en dot1q trunk p? dette interfacet og et nytt vlan 6 for ? ta h?nd om native trafikk p? det aktuelle interfacet p? molde-sw (Gi 6/2)." Jeg regner med at det er relatert til dette? Det jeg lurer p? er n?yaktig hva som mangler av info her (er det manglende vlan-nummer?). I NAVv2 er det jo slik at vi bruker netident for ? gj?re match i vlan.txt, men denne filen eksisterer jo ikke i NAVv3. Det kan derfor v?re derfor dette ikke virker i v3 og at vi m? finne en m?te ? avlede dette p? automatisk. Hvis det er en OID vi kan bruke for evt. ? hente ut manglende VLAN-nummer s? skal det v?re en kurrant sak ? rette dette. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFBkKRgRBuET7ul/ccRAs3EAJ0aE9KmlEfxuXCwSlCh+LsV6Tu/0QCgoohy f+O33ck+FhcKVz+a8r0cjlg= =0cDG -----END PGP SIGNATURE-----

2 7

Release-notice: NAV 3.0 beta 8
by Borge.Brunes＠cc.uit.no 09 Nov '04

09 Nov '04

morten.vold(a)ntnu.no said: > RPM for FreeBSD er n? ogs? tilgjengelig, men det gis fremdeles ingen > garantier for denne da vi ikke har noe FreeBSD-system ? teste p?. Bygging av rpm-pakker for FreeBSD kan avsluttes da vi er i ferd med ? f? lagt NAV inn i ports? B?rge ?http://www.no.freebsd.org/ports/index.html

1 0

Release-notice: NAV 3.0 beta 8
by odd.hauge＠himolde.no 09 Nov '04

09 Nov '04

>> Uten at jeg skal uttale meg for bombesikkert, ligner dette litt p? >> problemene vi hadde da vi fikset en del av feilene i gDD mens vi >> allerede hadde feil i databasen. Hadde jeg v?rt deg, ville jeg pr?vd >> fremgangsm?ten jeg beskrev i release-notatene jeg akkurat postet her - >> dvs. slette alle modulinnslagene mens NAV er nede for telling, og la alt >> bli samlet inn p? nytt. >> > Har ? gjort dette. Men Nav slitter fortsatt med switcher i catalyst 4000 > familien, som for mitt vedkommende er 2848 og 2980 switcher. Det > rappoteres n? kun 1 modul for begge switchtypene, selv om de har hhv 2 > (2948) og 3 (2980). For 2948 rappoteres modul 2, og for 2980 modul 3. > > Det er ikke dukket opp noe switcheporter for disse 2 switchetypene i > rapporten enn?, men hvis det var som f?r i dag dukker switchportene for > 2948 opp, mens det ikke dukker opp noen porter for 2980. ?vrige switchers > porter viser i rapporten. > > Jeg har pr?vt ? slette og legge til switchene uten noen endring i > rapporten. Ser p? report/sw?catid_op=in&catid=SW,GSW at det rappoteres litt vilk?rlig om det er 2 eller 50 porter. N? st?r det 2: Room Name IP address Type Org modules swport memory AR082 molde-telerom1-sw2.hiMolde.no 158.38.83.25 wsc2948 IT 1 2 memory Mens andre ganger kan det st?r 50. Tar jeg en select * from module varierer ogs? innholdet der. Tidligere i dag fikk jeg detet resultatet 376 | 296 | 12 | 6 | ATM-CES OC3 Single Mode, CBR E1, 120 ohm | y | | 405 | 60 | 18 | 2 | 10/100/1000 Ethernet 50 port WS-C2948G Rev. 2.4 | y | | WS-C2948G 406 | 61 | 20 | 2 | 10/100/1000 Ethernet 50 port WS-C2948G Rev. 2.0 | y | | WS-C2948G 407 | 52 | 22 | 2 | 10/100/1000 Ethernet 50 port WS-C2948G Rev. 2.4 | y | | WS-C2948G 408 | 57 | 23 | 2 | 10/100/1000 Ethernet 50 port WS-C2948G Rev. 2.0 | y | | WS-C2948G 409 | 81 | 17 | 2 | 10/100/1000 Ethernet 50 port WS-C2948G Rev. 2.0 | y | | WS-C2948G Mens n? f?r jeg: 376 | 296 | 12 | 6 | ATM-CES OC3 Single Mode, CBR E1, 120 ohm | y | | 410 | 60 | 18 | 1 | Switching Supervisor 0 port WS-X2948 Rev. 2.4 | y | | WS-X2948 411 | 61 | 20 | 1 | Switching Supervisor 0 port WS-X2948 Rev. 2.0 | y | | WS-X2948 412 | 57 | 23 | 1 | Switching Supervisor 0 port WS-X2948 Rev. 2.0 | y | | WS-X2948 413 | 52 | 22 | 1 | Switching Supervisor 0 port WS-X2948 Rev. 2.4 | y | | WS-X2948 414 | 81 | 17 | 1 | Switching Supervisor 0 port WS-X2948 Rev. 2.0 | y | | WS-X2948 Modulid 405 til 409 er borte. Burde ikke alle moduleid'er fra 409 - 414 v?rt i module tabellen ? - odd arne

1 0

Release-notice: NAV 3.0 beta 8
by odd.hauge＠hiMolde.no 09 Nov '04

09 Nov '04

Hei. F?r noen feilmeldinger i webgui n?r jeg g?r inn p? /logger: Mod_python error: "PythonHandler main" Traceback (most recent call last): File "/usr/local/apache/libexec/python/lib/python2.2/site-packages/mod_python/apache.py", line 193, in Dispatch result = object(req) File "/usr/local/nav/apache/webroot/messages/main.py", line 63, in handler path = req.uri.split(BASEPATH)[1] IndexError: list index out of range N? her jeg vel ikke s? mye data der, men lell. Etter ? ha trukket refresh noen ganger kommer siden opp. En mer alvorlig ting er at nav i Reports (/report/swport?b1.netboxid=??) kun viser 2 switchinterface for alle catalyst 4000 type switchene. Dette var riktig i beta 7. Det er kun mangement interfacene som vises, sc0 og me1, disse tilh?rer modul 1, men selve switchportene som tilh?rer modul 2 eller h?yrere vises ikke, f?lgelig ingen switchporter. Satte da uptodate flagget lik "f "for disse switchene. Da ble 2948 switchene riktige, mens 2980G(A) switchene rappoteres med 0 switchporter. Det vises fortsatt kun 1 modul i stedet for minst 2 moduler. S? grunnen til at switchportene vises for 2948 switchene er at det er modul 2 som er vist i rapporten etter at flagget ble satt og ikke modul 1. For 2980-switchene som har 3 moduler, er det modul 3 som listes (har 32 10/100 porter og 2 GBIC), men uten tilh?rende switchporter. S? det er et eller annet som ikke er helt godt her. gDD log gir denne typen feilmeldinger for disse switchene: SQLException for update statement: INSERT INTO module (moduleid,deviceid,netboxid,module,model,descr) VALUES ('167','142','124','2','WS-C2948G','10/100/1000 Ethernet 50 port WS-C2948G Rev. 2.5') java.sql.SQLException: ERROR: Cannot insert a duplicate key into unique index module_deviceid_key java.sql.SQLException: ERROR: Cannot insert a duplicate key into unique index module_deviceid_key Device Browser av routere og switcher gir f?lgende feil hos meg: Traceback (most recent call last): File "/usr/local/nav/lib/python/nav/web/devBrowser/dispatcher.py", line 96, in handler result = handler.process(request) File "/usr/local/nav/lib/python/nav/web/devBrowser/netbox.py", line 162, in process result.append(info.showInfo()) File "/usr/local/nav/lib/python/nav/web/devBrowser/netbox.py", line 200, in showInfo info.add('Gateway', self.showGw()) File "/usr/local/nav/lib/python/nav/web/devBrowser/netbox.py", line 235, in showGw gwNetbox = gw.gwport.module.netbox File "/usr/local/apache/libexec/python/lib/python2.2/site-packages/forgetSQL.py", line 389, in __getattr__ self.load() File "/usr/local/apache/libexec/python/lib/python2.2/site-packages/forgetSQL.py", line 468, in load self._loadDB() File "/usr/local/apache/libexec/python/lib/python2.2/site-packages/forgetSQL.py", line 697, in _loadDB curs.execute(sql, self._getID()) ProgrammingError: ERROR: No such attribute gwport.ospf SELECT gwport.interface, gwport.speed, gwport.gwportid, gwport.masterindex, gwport.ifindex, gwport.link, gwport.to_swportid, gwport.ospf, gwport.moduleid, gwport.to_netboxid FROM gwport WHERE (gwport.gwportid=74) Problemene jeg har med at getDeviceData ikke klarer ? avlede Vlan for switchene i Kristiansund som kj?rer med interVlan ruting p? Uninetts ruter er fortsatt til stede. Dette virker i Nav2, I /report/gw st?r et at det er 15 gwp for molde-gw.uninett.no (7206), mens /report/swport?b1.netboxid=12 kun gir 7 hits. Hvorfor er det forskjell her ? Det positive er at gw-porter for en 1700 og en 2600 ruter n? avledes helt fint, noe som ikke virket i beta7. mvh Odd Arne Hauge

3 2

Release-notice: NAV 3.0 beta 8
by morten.vold＠ntnu.no 09 Nov '04

09 Nov '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 beta 8 er n? tilgjengelig for nedlasting p? http://metanav.ntnu.no/downloads/v3/ . NB: Det er ikke generert ny RPM-pakke for FreeBSD - dette vil skje i morgen, men .spec-fil for dette finnes i tarballen for den som vil lage RPM selv. For de som installerer NAV 3 beta for f?rste gang ================================================= Som det tidligere er gjort oppmerksom p?, b?r man ha en egen boks dedikert til beta-testingen, iom. at versjon 3 ikke er klar til ? ta over for en v2-boks i produksjon. P? ovennevnte URL finnes filen preinstall_apache2.txt, som forel?pig er den eneste formen for dokumentasjon p? hva man trenger ? gjennomf?re for ? klargj?re en boks for NAV v3. Filen er en logg over hva jeg foretok meg for ? f? installert NAV v3 beta p? v?r RedHat 9-baserte boks. Universitetet i Troms? har brukt denne som et utgangspunkt for ? gj?re noe tilsvarende p? FreeBSD. For den som ?nsker ? installere p? RedHat 9, ligger det en RPM-pakke ute p? metanav. Denne er merket med noen f? avhengigheter, men langt i fra alle (derav filen preinstall.txt). Ellers har man muligheten for ? installere fra kildekoden, som n? ogs? ligger ute. RPM-pakke for rpm p? FreeBSD ligger der for?vrig ogs?. Etter at man har installert NAV (eller pakket ut kildekoden), finnes det en liten guide til ? komme i gang i filen doc/getting-started.txt (hvis du installerte RPM'en, ligger denne som /usr/local/nav/doc/getting-started.txt). For de som skal oppgradere fra beta 7 ===================================== Det er noen endringer i databaseskjemaet som m? tas hensyn til, changeloggen (nedenfor) gir n?rmere detaljer. CHANGES ======= Version 3.0_beta8 (released 08 November 2004) ##################################################################### ## WARNING WARNING WARNING WARNING WARNING WARNING WARNING ## ##################################################################### ## ## ## This release makes changes to the NAV database. If you are ## ## upgrading from a previous release you also need to upgrade your ## ## database schema. For information on how to upgrade the database ## ## schema, please take a look in doc/sql/upgrades for more ## ## information. ## ## ## ##################################################################### User-visible changes: * Encoding info has been added to several python modules, to make newer versions of Python stop complaining about PEP 0263. But there are probably more modules that need these changes. * Attempting to stop not running cron services using the nav command will no longer yield a Python exception. * Alert profiles containing time periods spanning across midnight will now work. * Interface names containing more than one forward slash now work with makecricketconfig. * Added config file cricket-views.conf to define which views makecricketconfig will create. * Several editdb crash bugs were fixed. * Default set of reports (report.conf) were bugfixed. * MachineTracker had a serious design flaw in its primary SQL statement, which would cause arbitrary and erroneous search result. The automatic combination of arp and cam data should now be more accurate. * When there are no active messages, the annoying "No Found" message is no longer displayed on the home page. * Some missing icons have been added, and new icons for some tools. * Some strange errors on the web were due to small differences in mod_python versions used on Apache 1.3 and Apache 2, the ones that have been found have been fixed. * Tremendous amount of fixes related to the getDeviceData collection system, more accurate collection of module information and module state, detection of replaced netboxes, etc. * Errors in getDeviceData and missing constraints in the database would sometimes cause several netboxes and/or several modules to refer to the same device and serial number (which is supposed to be impossible). This has been fixed. * Improvements to vlanPlot layout, including links to IP device center and Network Explorer. Will now also display an error message when contact cannot be establishwith the vPServer, whereas previously it would only present a blank screen. Lykke til med installasjon og drift av ny beta! - -- Morten Vold NTNU ITEA Nettgruppen _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFBj4/ZXxIl0kpcOkQRAs+wAJ97swD7hqfMO3H0dL0J97wzcWH0PQCdHpnH FH7c0gUC9BoLDZAu+EIZVLo= =Tr+4 -----END PGP SIGNATURE----- >From Ketil.Forselv at hin.no Mon Nov 8 21:13:08 2004 From: Ketil.Forselv at hin.no (Forselv Ketil) Date: Mon Nov 8 21:13:11 2004 Subject: SV: [Nav-users] Release-notice: NAV 3.0 beta 8 Message-ID: <4147C56944E2B64D978FA0EAB10A14FA4B07D7(a)fagserver2.fag.hin.no> Hei Oppgraderingen gikk berre lekkert. En ting er glemt: Scriptene i /usr/local/nav/etc/init.d m? modifiseres med su - , ellers blir det noe permission denied for .bash mvh Ketil -----Opprinnelig melding----- Fra: nav-users-bounces(a)mailhost.itea.ntnu.no [mailto:nav-users-bounces@mailhost.itea.ntnu.no] P? vegne av Morten Vold Sendt: 8. november 2004 16:25 Til: nav-users(a)itea.ntnu.no Emne: [Nav-users] Release-notice: NAV 3.0 beta 8 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 beta 8 er n? tilgjengelig for nedlasting p? http://metanav.ntnu.no/downloads/v3/ . NB: Det er ikke generert ny RPM-pakke for FreeBSD - dette vil skje i morgen, men .spec-fil for dette finnes i tarballen for den som vil lage RPM selv. For de som installerer NAV 3 beta for f?rste gang ================================================= Som det tidligere er gjort oppmerksom p?, b?r man ha en egen boks dedikert til beta-testingen, iom. at versjon 3 ikke er klar til ? ta over for en v2-boks i produksjon. P? ovennevnte URL finnes filen preinstall_apache2.txt, som forel?pig er den eneste formen for dokumentasjon p? hva man trenger ? gjennomf?re for ? klargj?re en boks for NAV v3. Filen er en logg over hva jeg foretok meg for ? f? installert NAV v3 beta p? v?r RedHat 9-baserte boks. Universitetet i Troms? har brukt denne som et utgangspunkt for ? gj?re noe tilsvarende p? FreeBSD. For den som ?nsker ? installere p? RedHat 9, ligger det en RPM-pakke ute p? metanav. Denne er merket med noen f? avhengigheter, men langt i fra alle (derav filen preinstall.txt). Ellers har man muligheten for ? installere fra kildekoden, som n? ogs? ligger ute. RPM-pakke for rpm p? FreeBSD ligger der for?vrig ogs?. Etter at man har installert NAV (eller pakket ut kildekoden), finnes det en liten guide til ? komme i gang i filen doc/getting-started.txt (hvis du installerte RPM'en, ligger denne som /usr/local/nav/doc/getting-started.txt). For de som skal oppgradere fra beta 7 ===================================== Det er noen endringer i databaseskjemaet som m? tas hensyn til, changeloggen (nedenfor) gir n?rmere detaljer. CHANGES ======= Version 3.0_beta8 (released 08 November 2004) ##################################################################### ## WARNING WARNING WARNING WARNING WARNING WARNING WARNING ## ##################################################################### ## ## ## This release makes changes to the NAV database. If you are ## ## upgrading from a previous release you also need to upgrade your ## ## database schema. For information on how to upgrade the database ## ## schema, please take a look in doc/sql/upgrades for more ## ## information. ## ## ## ##################################################################### User-visible changes: * Encoding info has been added to several python modules, to make newer versions of Python stop complaining about PEP 0263. But there are probably more modules that need these changes. * Attempting to stop not running cron services using the nav command will no longer yield a Python exception. * Alert profiles containing time periods spanning across midnight will now work. * Interface names containing more than one forward slash now work with makecricketconfig. * Added config file cricket-views.conf to define which views makecricketconfig will create. * Several editdb crash bugs were fixed. * Default set of reports (report.conf) were bugfixed. * MachineTracker had a serious design flaw in its primary SQL statement, which would cause arbitrary and erroneous search result. The automatic combination of arp and cam data should now be more accurate. * When there are no active messages, the annoying "No Found" message is no longer displayed on the home page. * Some missing icons have been added, and new icons for some tools. * Some strange errors on the web were due to small differences in mod_python versions used on Apache 1.3 and Apache 2, the ones that have been found have been fixed. * Tremendous amount of fixes related to the getDeviceData collection system, more accurate collection of module information and module state, detection of replaced netboxes, etc. * Errors in getDeviceData and missing constraints in the database would sometimes cause several netboxes and/or several modules to refer to the same device and serial number (which is supposed to be impossible). This has been fixed. * Improvements to vlanPlot layout, including links to IP device center and Network Explorer. Will now also display an error message when contact cannot be establishwith the vPServer, whereas previously it would only present a blank screen. Lykke til med installasjon og drift av ny beta! - -- Morten Vold NTNU ITEA Nettgruppen _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFBj4/ZXxIl0kpcOkQRAs+wAJ97swD7hqfMO3H0dL0J97wzcWH0PQCdHpnH FH7c0gUC9BoLDZAu+EIZVLo= =Tr+4 -----END PGP SIGNATURE----- _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 1

SV: [Nav-users] nav3, Debian Sarge og cricket
by peder.sefland＠hivolda.no 04 Nov '04

04 Nov '04

Visst ikke det har kommet noen oppdateringer p? denne pakken i det siste, tror jeg ikke du skal instalere debian sin cricket. Se punkt 5 i /usr/share/doc/nav/README.Debian 5. Cricket o Do not install the Cricket Debian package o Download cricket-1.0.5 (http://prdownloads.sf.net/cricket/cricket-1.0.5.tar.gz) o Unpack the tar-ball in /usr/local 'cd /usr/local; tar xvzf /tmp/cricket-1.0.5.tar.gz; ln -s cricket-1.0.5 cricket; cd cricket; ln -s . cricket; chown -R navcron.nav cricket-1.0.5' o Patch the cricket source with the patches following the NAV Debian package: 'cd /usr/local/cricket; patch -p1 /usr/share/doc/nav/cricket_patches/nav_locking.patch' o Run Cricket's configure script: 'cd /usr/local/cricket; ./configure' o Copy the NAV specific Cricket configuration files: 'cd /usr/local/cricket; cp /usr/share/doc/nav/cricket/cricket/subtree-sets .; cp -r /usr/share/doc/nav/cricket/cricket-config .; cp cricket-conf.pl.sample cricket-conf.pl' o Edit the cricket-conf.pl and set these variables: $gCricketHome = "/usr/share/nav/cricket"; o Run compile as the navcron-user: 'cd /usr/local/cricket/lib; ./compile' o Run makecricketconfig.pl: 'cd /usr/local/cricket; /usr/lib/nav/makecricketconfig.pl' Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.) >>> Ole Sigurd Nyvold Hansen <Ole.S.Hansen(a)hit.no> 04.11.2004 12:32:19 >>> Hei, Etter # apt-get install cricket og # chmod 644 /etc/cricket/config/config.db p? en vanlig Debian Sarge kommer http://localhost/cgi-bin/cricket/grapher.cgi greitt opp (uten data). Sarge har apache 1.3.26. P? v?r nav3 beta7(?) installasjon f?r vi ikke se cricket data. Noen tips? mvh OleS _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

nav3, Debian Sarge og cricket
by Ole.S.Hansen＠hit.no 04 Nov '04

04 Nov '04

Hei, Etter # apt-get install cricket og # chmod 644 /etc/cricket/config/config.db p? en vanlig Debian Sarge kommer http://localhost/cgi-bin/cricket/grapher.cgi greitt opp (uten data). Sarge har apache 1.3.26. P? v?r nav3 beta7(?) installasjon f?r vi ikke se cricket data. Noen tips? mvh OleS

1 0

SV: Re: [Nav-users] 6509 problem med nav3
by peder.sefland＠hivolda.no 29 Okt '04

29 Okt '04

>>> Vidar Faltinsen <Vidar.Faltinsen(a)uninett.no> 29.10.2004 11:17:28 >>> Pr?v en select * from cam where sysname like 'navnetp?svitsjen%'; Gjorde noen fors?k (2970 har ip 158.38.75.58): manage=> select * from cam where sysname like 'volda-aasen-giga-sw%'; camid | netboxid | sysname | ifindex | module | port | mac | start_time | end_time | misscnt -------+----------+---------+---------+--------+------+-----+------------+----------+--------- (0 rows) manage=> select * from cam where sysname like 'volda-aasen-giga-sw'; camid | netboxid | sysname | ifindex | module | port | mac | start_time | end_time | misscnt -------+----------+---------+---------+--------+------+-----+------------+----------+--------- (0 rows) manage=> select * from cam where sysname like '158.38.75.58%'; camid | netboxid | sysname | ifindex | module | port | mac | start_time | end_time | misscnt -------+----------+--------------+---------+--------+------+--------------+----------------------------+----------------------------+--------- 41 | 28 | 158.38.75.58 | 10101 | | | 000f234a0f18 | 2004-09-15 11:10:50.550405 | 2004-09-16 10:12:07.53268 | 37 | 28 | 158.38.75.58 | 10125 | | | 000c85fe1d0b | 2004-09-15 11:10:50.228705 | 2004-09-16 10:12:08.593464 | 36 | 28 | 158.38.75.58 | 10124 | | | 0002fd39b456 | 2004-09-15 11:10:49.769291 | 2004-09-16 10:12:12.772662 | 40 | 28 | 158.38.75.58 | 10127 | | | 000e84bba299 | 2004-09-15 11:10:50.535114 | 2004-09-16 10:12:14.340961 | 39 | 28 | 158.38.75.58 | 10126 | | | 000dbc11b9f1 | 2004-09-15 11:10:50.517444 | 2004-09-16 10:12:17.938701 | 38 | 28 | 158.38.75.58 | 10125 | | | 000cce20eff1 | 2004-09-15 11:10:50.498858 | 2004-09-15 15:10:34.922234 | Dersom du f?r treff i cam, s? ligger feilen i frontend. F?r du ikke treff, s? m? vi se hvordan denne boksen er oid-klassifisert, det kan du ogs? selv gj?r i report, eller forresten, det er kanskje ikke tilgjengelig i patchen du har. Vel du kan gj?re: select sysname,snmpoid,oidname,mib from netbox left join netboxsnmpoid using (netboxid) left join snmpoid using (snmpoidid) where oidname='dot1dBasePortIfIndex' order by sysname; Fikk bl.a dette resultat (utdrag): 158.38.75.57 | 1.3.6.1.2.1.17.1.4.1.2 | dot1dBasePortIfIndex | BRIDGE-MIB 158.38.75.58 | 1.3.6.1.2.1.17.1.4.1.2 | dot1dBasePortIfIndex | BRIDGE-MIB 158.38.81.18 | 1.3.6.1.2.1.17.1.4.1.2 | dot1dBasePortIfIndex | BRIDGE-MIB N?r jeg s?ker p? maskiner som jeg vet st?r p? 2970 i nav3 f?r jeg meldingen: Your search did not return any results N?r jeg s?ker p? samme ip i nav2, finner den mac-addressen. Men sier: Ikke resultat p? s?k i cam-tabellen. Dersom svitsjen din ikke blir med her s? har vi et problem. Du kan pr?ve ? polle boksen direkte med den OIDen du f?r ut av overnevnte select og se om den svarer. Jeg vil jo gjette p? det, men man vet jo aldri. Som du ser er OID'en lik for disse switchene. Men i Report kommer disse slik ut, (og som ogs? stemmer) 158.38.75.57 SW 0 cat2970 158.38.75.58 SW 0 catalyst297024TS 158.38.81.18 SW 0 cat2924XLv Jeg har ikke lagt disse 2970 inn i dns enda. Skal gj?re det n?. Men kan det ha noe ? si? H?per dette ordner seg. 2970 er den mest stilleg?ende cisco-switchen jeg har vert borti. Da kan en bruke den p? rom uten og m?tte sette opp et helt skap bare for en switch. Jeg mangler et par gif bilder - images/emotd/top-l.gif (I ?pningsbilde, etter at jeg har lagt inn en melding) - navAdmin/gfx/wlan.gif (I Network Explorer p? tr?dl?se basestasjoner) Peder

2 1

SV: Re: [Nav-users] 6509 problem med nav3
by peder.sefland＠hivolda.no 29 Okt '04

29 Okt '04

Jeg kj?rte nav3 p? en vmware-installasjon p? min berbare. Noe som medf?rte at jeg tok den mye ned og opp. Da ble dato og klokke helt feil, i tillegg til at den ikke fikk den tid den trengt til ? samle inn data'en. N?r dato og klokke ble satt riktig og den fikk st?tt lenge nok, kom data'ene inn. Peder >>> Borge Brunes <Borge.Brunes(a)cc.uit.no> 29.10.2004 13:02:20 >>> peder.sefland(a)hivolda.no said: > Stor glede her i g?rden N? g?r det riktig vei her ogs?. N? har jeg f?tt opp > alle interface til 6509 i nav3 og kan bla nedover i Network Explorer. Og hva var det som skulle til? Kan v?re greit for oss andre ? vite ogs?. mvh. -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

1 0

SV: Re: [Nav-users] 6509 problem med nav3
by Borge.Brunes＠cc.uit.no 29 Okt '04

29 Okt '04

peder.sefland(a)hivolda.no said: > Stor glede her i g?rden N? g?r det riktig vei her ogs?. N? har jeg f?tt opp > alle interface til 6509 i nav3 og kan bla nedover i Network Explorer. Og hva var det som skulle til? Kan v?re greit for oss andre ? vite ogs?. mvh. -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

1 0

SV: Re: [Nav-users] 6509 problem med nav3
by Vidar.Faltinsen＠uninett.no 29 Okt '04

29 Okt '04

On Thu, 28 Oct 2004, Peder Magne Sefland wrote: > Stor glede her i g?rden > N? g?r det riktig vei her ogs?. Det var jo bra! > Men dessverre har jeg ikke sporing p? maskiner som st?r p? cisco2970, samme som var problemet i nav2-1-5 ogs?. Det var rart, jeg har ikke selv v?rt borti denne svitsjen. Feilen kan jo ligge flere steder. Du har porter for svitsjen i report, s? det er greit. Pr?v en select * from cam where sysname like 'navnetp?svitsjen%'; og se om du f?r treff. Alts? interaktivt i postgres, du starter dette med 'psql manage navread', passord til navread har du satt i db.conf. Dersom du f?r treff i cam, s? ligger feilen i frontend. F?r du ikke treff, s? m? vi se hvordan denne boksen er oid-klassifisert, det kan du ogs? selv gj?r i report, eller forresten, det er kanskje ikke tilgjengelig i patchen du har. Vel du kan gj?re: select sysname,snmpoid,oidname,mib from netbox left join netboxsnmpoid using (netboxid) left join snmpoid using (snmpoidid) where oidname='dot1dBasePortIfIndex' order by sysname; Dersom svitsjen din ikke blir med her s? har vi et problem. Du kan pr?ve ? polle boksen direkte med den OIDen du f?r ut av overnevnte select og se om den svarer. Jeg vil jo gjette p? det, men man vet jo aldri. mvh - Vidar

1 0

6509 problem med nav3
by peder.sefland＠hivolda.no 27 Okt '04

27 Okt '04

P? torsdag i forrige uke fikk vi ny senterswitch 6509 som ogs? kj?rer lokal ruting. F?r dette hadde vi 7206 som lokal ruter, og da hadde jeg denne i nav3, med alle interface og den kom til og med opp i Network Explorer (dog uten noen switcher under). Den nye 6509 viser ingen moduler eller interfaces. Det eneste nav3 har funnet ut er at det er en 6509 boks. Men min nav2-1-5 har f?tt opp alle interfacene til 6509. Jeg har til og med f?tt til vlanPlot til ? fungere p? denne. Problemet mitt p? nav2-1-5 er at den ikke f?r mac/ip sporing p? maskinene som st?r p? den. Dette g?r ikke rette veien :-) Er det noen andre som har tips rundt denne boksen Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.)

2 1

Til gammu experter
by peder.sefland＠hivolda.no 26 Okt '04

26 Okt '04

Vi har laget en del script som skal sende tekstmeldinger p? ting som ikke dekkes av nav. Scriptene funger n?r de blir kj?rt fra konsolet, men ikke n?r de blir lagt i crontab. Selv ikke med crontab til root Vi har pr?vd ? legge brukerene til gruppen uucp ls -la /dev/ |grep ttyS0 crw-rw---- 1 root uucp 4, 64 okt 20 13:56 ttyS0 uten at dette hjelper heller. Er det noen flinke p? gammu som kan svare p? dette? Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.)

3 2

VS: SV: Re: [Nav-users] Til gammu experter
by edprp＠it.uib.no 20 Okt '04

20 Okt '04

Hei ! > Gj?re dere det fra navcron brukeren eller brukere dere andre brukere til ? sende sms? Vi benytter gammu til ? sende sms fra Big Brother. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kef at it.hin.no Mon Oct 11 16:27:31 2004 From: kef at it.hin.no (Ketil Forselv) Date: Tue Oct 26 10:35:51 2004 Subject: [Nav-users] SV: eventEngine og getDeviceData =?iso-8859-1?Q?kj=F8rer_ikke?= In-Reply-To: <Pine.LNX.4.61.0410111204110.6369(a)valentin.uninett.no> References: <4147C56944E2B64D978FA0EAB10A14FA4B075F(a)fagserver2.fag.hin.no> <Pine.LNX.4.61.0410111204110.6369(a)valentin.uninett.no> Message-ID: <4023.158.39.21.73.1097501251.squirrel(a)webmail-it.hin.no> Hei igjen Vidar Faltinsen said: > > Ketil, > > Er dette fortsatt et problem? Ser du ingen ruterporter? Jeg kj?rer nav > mot to stk 3750Metro bokser uten problem. Kanskje jeg f?r snmp aksess > til hin-gsw s? kan jeg innlemme den i navpiloten min og teste? Har f?tt den til ? virke i Nav3 beta 7, men ikke i Nav 2.1.5. Du kan gjerne f? snmp-aksess. I samme slengen, Nav3 beta 7 fungerer greit, med et stort unntak, jeg f?r den ikke til ? fungere sammen med Tomcat (jakarta-tomcat-4.1.30). *.war-filene er kopiert inn i tomcat/webapps, og mener jeg har fulgt oppskrifta til punkt og prikke. mvh Ketil > > mvh > - Vidar > > >

1 0

[Nav-users] Spørsmål om Cisco-log på nav2-1-5
by peder.sefland＠hivolda.no 15 Okt '04

15 Okt '04

Etter som jeg har forst?tt, vil det kanskje g? en stund f?r syslog-funksjonen i nav3 er helt p? plass. Derfor har jeg g?tt over alle switchene og satt syslogging til b?de nav2-1-5 og nav3 boksen v?r. Men jeg oppdaget noe merkelig p? nav2-1-5. Den viser syslog meldinger, men kutter ip-addressen p? 158.38.75(se under), NAVLog Viewer of log messages from network devices and programs 14.10.2004 Home Total 70 matches. 2004-10-14 19:58:58 158.38.75 LINEPROTO-5-UPDOWN Line protocol on Interface FastEthernet0/36, changed state to up 2004-10-14 19:58:57 158.38.75 LINK-3-UPDOWN Interface FastEthernet0/36, changed state to up 2004-10-14 19:58:56 158.38.75 LINEPROTO-5-UPDOWN Line protocol on Interface FastEthernet0/36, changed state to down 2004-10-14 16:28:20 158.38.75 LINEPROTO-5-UPDOWN Line protocol on Interface FastEthernet0/42, changed state to up 2004-10-14 16:28:19 158.38.75 LINK-3-UPDOWN Interface FastEthernet0/42, changed state to up Mens i /usr/local/nav/local/log/syslog/cisco.log kommer fram dns-namn eller hele ip'en Oct 14 22:14:36 volda-strom-sw6 219970: 22w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to up Oct 14 22:15:00 volda-strom-sw6 219971: 22w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to down Oct 14 22:15:03 volda-strom-sw6 219972: 22w0d: %LINK-3-UPDOWN: Interface FastEthernet0/15, changed state to up Oct 14 22:15:06 volda-strom-sw6 219973: 22w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to up Oct 14 22:15:18 158.38.75.32 9462: 21w3d: %LINK-3-UPDOWN: Interface FastEthernet0/7, changed state to down Oct 14 22:15:21 158.38.75.32 9463: 21w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7, changed state to down Oct 14 22:15:24 158.38.75.32 9464: 21w3d: %LINK-3-UPDOWN: Interface FastEthernet0/7, changed state to up Har noen en l?sning p? dette? Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.)

1 0

Feilmelding ved registrering av rutere i nav3
by peder.sefland＠hivolda.no 11 Okt '04

11 Okt '04

N?r jeg la inn/registrerte volda-gw i nav3, gikk det greitt. S? ville jeg legge inn ruteren i ?lesund, slik at jeg kunne f? opp statestikk p? trafikken mellom disse to. Da gikk det greitt ved det f?rste registrerings bilde (Se bilde), men n?r jeg trykte Contiunue kom denne feilmeldingen Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/var/www/nav/editdb/editdb.py", line 140, in handler output = editPage(req,pageList[table](),request) File "/var/www/nav/editdb/editdb.py", line 439, in editPage outputForm,action) File "/var/www/nav/editdb/editdb.py", line 2409, in add disabled=True)) TypeError: __init__() takes at least 2 non-keyword arguments (1 given) Sp?rsm?l nr2. Jeg har f?tt opp Network Explorer og kan trykke p? + tegnet for ? se interfacene p? volda-gw. Men hvordan f?r jeg lagt til switcher under volda-gw. Har pr?vd ? finne instruksjon p? hvordan man bruker Patch og Cabling under Cabling system. Hva skal st? i feltet "Jack"? Det stod en del om Network Exploerer i "Final Report TigaNav", men ingenting som hjalp meg p? dette omr?det. Peder Sefland

1 0

SV: Re: [Nav-users] The requested resource(/navAdmin/servlet/navAdmin) is not available. (Network ex
by peder.sefland＠hivolda.no 06 Okt '04

06 Okt '04

Jeg fant feilen ved ? lese "gamle" veiledninger for installasjon av beta 6. punkt 3. Kopier apache/webapps/* fra NAV inn i webapps/ i tomcat-katalogen. cp /usr/share/java/webapps/navAdmin.war /var/lib/tomcat4/webapps/ + /etc/init.d/tomcat restart gjorde susen Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.) >>> "Peder Magne Sefland" <peder.sefland(a)hivolda.no> 05.10.2004 09:09:46 >>> >>> Magnus Nordseth <magnus(a)ntnu.no> 04.10.2004 23:41:57 >>> Peder Magne Sefland: > > HTTP Status 404 - /navAdmin/servlet/navAdmin > > -------------------------------------------------------------------------------- > > type Status report > > message /navAdmin/servlet/navAdmin > > description The requested resource (/navAdmin/servlet/navAdmin) is not available. > > > -------------------------------------------------------------------------------- > > Apache Tomcat/4.1 > > > Jeg pr?vde ? kj?re logging p? apache, mens jeg navigerte meg rundt i nav. Uten at jeg kunne se noen direkte feil der. > > tail -f /var/log/apache2/error.log > > [Fri Oct 01 18:30:45 2004] [notice] mod_python: (Re)importing module 'toolbox' > [Fri Oct 01 18:30:53 2004] [notice] mod_python: (Re)importing module 'report' > [Fri Oct 01 18:31:04 2004] [notice] mod_python: (Re)importing module 'nav.web.pyproxy.proxy' > > Er det et python-problem (eller retter sagt utfordring) jeg har? Det ser ut til at problemet er relatert til tomcat, ikke python. Hva sier tomcat sin logg? less /var/log/tomcat4/catalina_2004-10-02.log Using CATALINA_BASE: /var/lib/tomcat4 Using CATALINA_HOME: /usr/share/tomcat4 Using CATALINA_TMPDIR: /var/lib/tomcat4/temp Using JAVA_HOME: /usr/lib/j2sdk1.4-sun Created MBeanServer with ID: 175d6ab:ff57bbc839:-8000:nav3.hivolda.no:1 Oct 2, 2004 5:43:06 AM org.apache.coyote.http11.Http11Protocol init INFO: Initializing Coyote HTTP/1.1 on port 8180 Starting service Tomcat-Standalone Apache Tomcat/4.1 Oct 2, 2004 5:43:12 AM org.apache.coyote.http11.Http11Protocol start INFO: Starting Coyote HTTP/1.1 on port 8180 Oct 2, 2004 5:43:12 AM org.apache.jk.common.ChannelSocket init INFO: JK2: ajp13 listening on /0.0.0.0:8009 Oct 2, 2004 5:43:12 AM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=103/456 config=/var/lib/tomcat4/conf/jk2.properties Stopping service Tomcat-Standalone Oct 2, 2004 5:48:43 AM org.apache.coyote.http11.Http11Protocol destroy INFO: Stoping http11 protocol on 8180 Catalina:type=ThreadPool,name=http8180 Using CATALINA_BASE: /var/lib/tomcat4 Using CATALINA_HOME: /usr/share/tomcat4 Using CATALINA_TMPDIR: /var/lib/tomcat4/temp Using JAVA_HOME: /usr/lib/j2sdk1.4-sun Created MBeanServer with ID: 175d6ab:ff57c25bac:-8000:nav3.hivolda.no:1 Oct 2, 2004 5:50:17 AM org.apache.coyote.http11.Http11Protocol init INFO: Initializing Coyote HTTP/1.1 on port 8180 Starting service Tomcat-Standalone Apache Tomcat/4.1 Oct 2, 2004 5:50:23 AM org.apache.coyote.http11.Http11Protocol start INFO: Starting Coyote HTTP/1.1 on port 8180 Oct 2, 2004 5:50:24 AM org.apache.jk.common.ChannelSocket init INFO: JK2: ajp13 listening on /0.0.0.0:8009 Oct 2, 2004 5:50:24 AM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=105/600 config=/var/lib/tomcat4/conf/jk2.properties ~ Kanskje det er viktigere det som st?r her less /var/log/tomcat4/localhost_2004-10-02.log 2004-10-02 05:43:07 StandardContext[/tomcat-docs]: Resources start failed: java.lang.IllegalArgumentException: Document base /var/lib/tomcat4/webapps/tomcat-docs does not exist or is not a readable directory at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:193) at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3349) at org.apache.catalina.core.StandardContext.start(StandardContext.java:3479) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1188) at org.apache.catalina.core.StandardHost.start(StandardHost.java:754) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1188) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:363) at org.apache.catalina.core.StandardService.start(StandardService.java:497) at org.apache.catalina.core.StandardServer.start(StandardServer.java:2190) at org.apache.catalina.startup.Catalina.start(Catalina.java:512) at org.apache.catalina.startup.Catalina.execute(Catalina.java:400) at org.apache.catalina.startup.Catalina.process(Catalina.java:180) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203) 2004-10-02 05:43:08 StandardContext[/tomcat-docs]: Context startup failed due to previous errors 2004-10-02 05:43:08 StandardContext[/tomcat-docs]: Exception during cleanup after start failed LifecycleException: Container StandardContext[/tomcat-docs] has not been started at org.apache.catalina.core.StandardContext.stop(StandardContext.java:3663) at org.apache.catalina.core.StandardContext.start(StandardContext.java:3641) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1188) at org.apache.catalina.core.StandardHost.start(StandardHost.java:754) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1188) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:363) at org.apache.catalina.core.StandardService.start(StandardService.java:497) at org.apache.catalina.core.StandardServer.start(StandardServer.java:2190) at org.apache.catalina.startup.Catalina.start(Catalina.java:512) at org.apache.catalina.startup.Catalina.execute(Catalina.java:400) at org.apache.catalina.startup.Catalina.process(Catalina.java:180) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203) 2004-10-02 05:43:08 HostConfig[localhost]: Deploying web application directory ROOT 2004-10-02 05:43:08 StandardHost[localhost]: Installing web application at context path from URL file:/var/lib/tomcat4/webapps/ROOT 2004-10-02 05:43:08 WebappLoader[]: Deploying class repositories to work directory /var/lib/tomcat4/work/Standalone/localhost/_ 2004-10-02 05:43:09 StandardManager[]: Seeding random number generator class java.security.SecureRandom 2004-10-02 05:43:11 StandardManager[]: Seeding of random number generator has been completed 2004-10-02 05:43:11 StandardWrapper[:default]: Loading container servlet default 2004-10-02 05:43:11 default: init 2004-10-02 05:43:11 StandardWrapper[:invoker]: Loading container servlet invoker 2004-10-02 05:43:11 invoker: init 2004-10-02 05:43:11 jsp: init 2004-10-02 05:48:43 StandardHost[localhost]: Removing web application at context path /tomcat-docs 2004-10-02 05:48:43 StandardHost[localhost]: ContainerBase.removeChild: stop: LifecycleException: Container StandardContext[/tomcat-docs] has not been started at org.apache.catalina.core.StandardContext.stop(StandardContext.java:3663) at org.apache.catalina.core.ContainerBase.removeChild(ContainerBase.java:1036) at org.apache.catalina.core.StandardHostDeployer.remove(StandardHostDeployer.java:470) at org.apache.catalina.core.StandardHost.remove(StandardHost.java:868) at org.apache.catalina.startup.HostConfig.undeployApps(HostConfig.java:758) at org.apache.catalina.startup.HostConfig.stop(HostConfig.java:738) Det er riktig som du p?peker at det sitter et tynt lag med python-kode foran tomcat, men denne har kun til funksjon ? s?rge for autentisering samt ? bidra til et enhetlig utseende. Dersom du likevel tror python-koden skaper problemer kan du pr?ve ? peke browseren direkte mot tomcat (typisk port 8080). N?r jeg bruker http og peker mot port 8180, viser den tomcat-siden. Er ikke sikker p? om den skal vise noe kataloger/filer her? Jeg kunne lagt ved skjermbilde, men vet ikke om nav-user mailinglisten tillater det. Directory Listing For / -------------------------------------------------------------------------------- Filename Size Last Modified -------------------------------------------------------------------------------- Apache Tomcat/4.1 Kan det v?re at henvisning til Document base mangler i installasjonveiledningen /usr/share/doc/nav/README.Debian? Hva skal evt. st? her 6. Tomcat Set the Java location in Tomcat's configuration and turn off security (to give our applets access to the filesystem): o /etc/default/tomcat4: JAVA_HOME="/usr/lib/j2sdk1.4-sun/jre" (Denne er n? korrigert til /usr/lib/j2sdk1.4-sun) TOMCAT4_SECURITY=no o restart Tomcat: /etc/init.d/tomcat4 restart Peder Sefland _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

[Nav-users] The requested resource (/navAdmin/servlet/navAdmin) is not available. (Network explorer)
by peder.sefland＠hivolda.no 05 Okt '04

05 Okt '04

Etter at jeg endelig fikk tomcat4 til ? kj?re p? min nav3-debian-installasjon, gledet jeg meg veldig til ? trykke p? Network explorer -ikonet, Men skuffelsen ble stor. Det som kom fram var dette. Home > Network explorer HTTP Status 404 - /navAdmin/servlet/navAdmin -------------------------------------------------------------------------------- type Status report message /navAdmin/servlet/navAdmin description The requested resource (/navAdmin/servlet/navAdmin) is not available. -------------------------------------------------------------------------------- Apache Tomcat/4.1 Jeg pr?vde ? kj?re logging p? apache, mens jeg navigerte meg rundt i nav. Uten at jeg kunne se noen direkte feil der. tail -f /var/log/apache2/error.log [Fri Oct 01 18:30:45 2004] [notice] mod_python: (Re)importing module 'toolbox' [Fri Oct 01 18:30:53 2004] [notice] mod_python: (Re)importing module 'report' [Fri Oct 01 18:31:04 2004] [notice] mod_python: (Re)importing module 'nav.web.pyproxy.proxy' Er det et python-problem (eller retter sagt utfordring) jeg har? Peder Sefland

2 1

SV: [Nav-users] Re: vises ikke portnamn påMachine Tracker
by peder.sefland＠hivolda.no 29 Sep '04

29 Sep '04

Her er en patch: : stain@isbre ~/navme/subsystem/devBrowser/src/lib;svn diff port.py Index: port.py =================================================================== --- port.py (revision 2945) +++ port.py (working copy) @@ -87,6 +87,9 @@ for field in \ 'port duplex ifindex portname media link speed trunk'.split(): value = getattr(port, field) + if type(value) == bool: + # convert to a string + value = value and "y" or "n" if value is None: continue if field == 'duplex': Si ifra om denne fikser problemet. Det hadde v?rt interessant ? vite hvilken versjon av mod_python, python, psycopg og postgresql dere har. Dette er en nav3debian-installasjon ||/ Name Version Description +++-=================================-=================================-================================================================================== ii postgresql 7.4.5-3 Object-relational SQL database, descended from POSTGRES dpkg -l *python* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-=================================-=================================-================================================================================== ii libapache2-mod-python 3.1.3-2.2 An Apache module that embeds Python within the server ii libapache2-mod-python2.3 3.1.3-2.2 An Apache 2 module that embeds Python 2.3 within the server ii libpysnmp3.3-python2.3 3.3.5-1 Python implementation of SNMP v.1/v.2c engine ii python 2.3.4-4 An interactive high-level object-oriented language (default version) ii python-cheetah 0.9.15-5 text-based template engine and Python code generator ii python-egenix-mxdatetime 2.0.5-2 Date and time handling routines for Python [dummy package] ii python-forgethtml 0.0.20031008-4 Python module for easy HTML-writing ii python-forgetsql 0.5.1-3 Python module for easy SQL-database access ii python-ipy 0.41-0pre1 Python module for handling IPv4 and IPv6 addresses and networks ii python-ldap 2.0.1-1 A LDAP interface module for Python. [dummy package] ii python-psycopg 1.1.15-1 Python module for PostgreSQL [dummy package] ii python-rrd 0.2.1-3 Python bindings for RRD ii python2.3 2.3.4-13 An interactive high-level object-oriented language (version 2.3) ii python2.3-cheetah 0.9.15-5 text-based template engine and Python code generator ii python2.3-egenix-mxdatetime 2.0.5-2 Date and time handling routines for Python 2.3 ii python2.3-egenix-mxtools 2.0.5-2 A collection of new builtins for Python 2.3 ii python2.3-forgethtml 0.0.20031008-4 Python module for easy SQL-database access ii python2.3-forgetsql 0.5.1-3 Python module for easy SQL-database access ii python2.3-ipy 0.41-0pre1 Python module for handling IPv4 and IPv6 addresses and networks ii python2.3-ldap 2.0.1-1 A LDAP interface module for Python 2.3 ii python2.3-psycopg 1.1.15-1 Python 2.3 module for PostgreSQL ii python2.3-rrd 0.2.1-3 Python bindings for RRD nav3:~# Jeg pr?vde ? gj?re disse endringene i port-py. Men da fikk jeg problem n?r jeg kj?rte apt-get upgrade. Da feilet compileringen av en oppdateringen av python. N?r jeg fjernet endringene i port.py gikk compileringen greitt Peder Sefland

1 0

Re: eventEngine og getDeviceData kjører ikke
by kef＠it.hin.no 29 Sep '04

29 Sep '04

Morten Vold said: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Forselv Ketil wrote: > >> [root@Nav3]# less >> /usr/local/nav/var/log/eventEngine/eventEngine-stderr.log >> Exception in thread "main" java.lang.NoClassDefFoundError: >> no/ntnu/nav/Path >> at eventEngine.<clinit>(eventEngine.java:54) > >> [root@Nav3]# less >> /usr/local/nav/var/log/getDeviceData/getDeviceData-stderr.log >> Exception in thread "main" java.lang.NoClassDefFoundError: >> no/ntnu/nav/Path >> at getDeviceData.<clinit>(getDeviceData.java:61) > > Dette lukter av feil CLASSPATH, men vi har ogs? sett det selv med riktig > CLASSPATH (da tror jeg at det var JVM'en til vedkommende det var et > problem med). > > F?r du starter eventEngine og gDD, skriv "echo $CLASSPATH", hvordan ser > den ut? [root@Nav3 root]# echo $CLASSPATH /usr/local/nav/lib/java/ConfigParser.jar /usr/local/nav/lib/java/Database.jar /usr/local/nav/lib/java/Event.jar /usr/local/nav/lib/java/Logger.jar /usr/local/nav/lib/java/NetboxInfo.jar /usr/local/nav/lib/java/SimpleSnmp.jar /usr/local/nav/lib/java/snmp4_13.jar /usr/local/nav/lib/java/Util.jar [root@Nav3 root]# og jeg har fremdeles samme feilmelding i xxxx-stderr.log, og navstatus er f?lgende: [root@Nav3 root]# /usr/local/nav/bin/nav status mactrace: Up cricket: Up eventEngine does not seem to be running... iptrace: Up maintengine: Up servicemon.py (pid 879) is running... smsd.pl (pid 912) is running... thresholdMon: Up networkDiscovery: Up logengine: Up safe_smsd: Up Alertengine is running with process id 945. It has been running for 14 minutes and 55 seconds. backup: Up pping.py (pid 958) is running... getDeviceData does not seem to be running... mvh Ketil > > - -- > Morten Vold > NTNU ITEA Nettgruppen > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.5 (GNU/Linux) > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org > > iD8DBQFBWREKXxIl0kpcOkQRAvYUAKDM5P1o3C4KZA7KmA0GLMqmVN2D1wCg5Ncg > upbhwYv3b+jNpgh5rULffEg= > =508O > -----END PGP SIGNATURE----- >

1 0

Feilmelding ved oppstart av Nav
by Ketil.Forselv＠hin.no 29 Sep '04

29 Sep '04

Hei Har omsider f?tt tid til ? installere Nav beta 7 p? Redhat 9.0 med Apache 2. http://nav3.hin.no Jeg f?r ved oppstart f?lgende feilmeldinger for eventEngine og getDeviceData: bash: /root/.bashrc: Permission denied bash: /root/.bashrc: Permission denied Noen som kan sette meg p? sporet? mvh Ketil [root@Nav3 root]# /usr/local/nav/bin/nav start Starting mactrace: Ok Starting cricket: Ok Starting eventEngine: bash: /root/.bashrc: Permission denied bash: /root/.bashrc: Permission denied Ok Starting iptrace: Ok Starting maintengine: Ok Starting servicemon: bash: /root/.bashrc: Permission denied Ok Starting smsd.pl: bash: /root/.bashrc: Permission denied No password found for user navwrite in db.conf at /usr/local/nav/lib/perl/NAV.pm line 72. Failed Starting thresholdMon: Ok Starting networkDiscovery: Ok Starting logengine: Ok Starting safe_smsd: Ok bash: /root/.bashrc: Permission denied Starting alertengine... Starting backup: Ok Starting pping: Ok Starting getDeviceData: bash: /root/.bashrc: Permission denied bash: /root/.bashrc: Permission denied Ok

3 2

[Nav-users] SV: eventEngine og getDeviceData kjører ikke
by Ketil.Forselv＠hin.no 28 Sep '04

28 Sep '04

Hei Morten Da har jeg funnet ut av eventEngine og gDD. N?r jeg f?lger oppskrifta i preinstall_apache2.txt for ? lage fila nav_environ.sh, ga den f?lgende output: CLASSPATH=/usr/local/nav/lib/java/*.jar for jar in /usr/local/nav/lib/java/*.jar; do if [ "/usr/local/nav/lib/java/*.jar" == "/usr/local/nav/lib/java/*.jar" ]; then CLASSPATH="/usr/local/nav/lib/java/*.jar:" fi done if [ "" == "/usr/local/nav/lib/python" ]; then PYTHONPATH="/usr/local/nav/lib/python:/usr/local/nav/lib/python" fi if [ "" == "" ]; then PERL5LIB=":/usr/local/nav/lib/perl" fi Jeg la derfor inn en ny manuelt, samt kall til fila i begynnelsen av /etc/rc.d/initd/httpd og da ordnet det seg. Har imidlertid noe python-rusk, men f?r lagt inn nettutstyr. Det som ikke fungerer er innsamling fra lokal ruter hin-gsw, og f?r dermed ikke ut nett og vlan-informasjon. Det er en Cisco WS-C3750G-12S SW 12.2(18)SE (den fungerer ikke i Nav 2.1.5 heller). Synes ? minnes at denne boksen har v?rt omtalt f?r. Er det noen som vet om en l?sning. mvh Ketil -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Forselv Ketil wrote: > [root@Nav3]# less /usr/local/nav/var/log/eventEngine/eventEngine-stderr.log > Exception in thread "main" java.lang.NoClassDefFoundError: no/ntnu/nav/Path > at eventEngine.<clinit>(eventEngine.java:54) > [root@Nav3]# less > /usr/local/nav/var/log/getDeviceData/getDeviceData-stderr.log > Exception in thread "main" java.lang.NoClassDefFoundError: no/ntnu/nav/Path > at getDeviceData.<clinit>(getDeviceData.java:61) Dette lukter av feil CLASSPATH, men vi har ogs? sett det selv med riktig CLASSPATH (da tror jeg at det var JVM'en til vedkommende det var et problem med). F?r du starter eventEngine og gDD, skriv "echo $CLASSPATH", hvordan ser den ut? - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFBWREKXxIl0kpcOkQRAvYUAKDM5P1o3C4KZA7KmA0GLMqmVN2D1wCg5Ncg upbhwYv3b+jNpgh5rULffEg= =508O -----END PGP SIGNATURE-----

1 0

[Nav-users] eventEngine og getDeviceData kjører ikke
by Ketil.Forselv＠hin.no 26 Sep '04

26 Sep '04

Hei Morten Jeg f?r ikke eventEngine og getDeviceData til ? kj?re. Installasjonen er gjort (for tredje gang) p? Redhat 9.0 Apache 2. Er det noe grums i java-filene? [root@Nav3]# less /usr/local/nav/var/log/eventEngine/eventEngine-stderr.log Exception in thread "main" java.lang.NoClassDefFoundError: no/ntnu/nav/Path at eventEngine.<clinit>(eventEngine.java:54) [root@Nav3]# less /usr/local/nav/var/log/getDeviceData/getDeviceData-stderr.log Exception in thread "main" java.lang.NoClassDefFoundError: no/ntnu/nav/Path at getDeviceData.<clinit>(getDeviceData.java:61) mvh Ketil

1 0

[Nav-users] vises ikke portnamn på Machine Tracker
by peder.sefland＠hivolda.no 23 Sep '04

23 Sep '04

N?r jeg s?ker ett ip i Machine Tracker finner den maskinen, hvilken switch og hvilken port den er koblet til. Men n?r jeg trykker p? porten skjer det ingen ting https://nav3.hivolda.no/machinetracker/swp?switch=158.38.75.2&module=7&port… Visst jeg pr?ver en annen vei og trykker p? switchen. Da kommer figuren opp som viser de ulike modulene og status p? portene, men her st?r jo ikke namn p? portene. Men visst jeg trykker p? porten der kommer det bare denne feilmeldingen. Mod_python error: "PythonHandler nav.web.devBrowser.dispatcher" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/lib/python2.3/site-packages/nav/web/devBrowser/dispatcher.py", line 129, in handler response = template.respond() File "/usr/lib/python2.3/site-packages/nav/web/templates/MainTemplate.py", line 745, in respond write(filter(VFS(SL + [globals(), __builtin__],"content",False)(), rawExpr='$content()')) # from line 225, col 1. File "/usr/lib/python2.3/site-packages/nav/web/templates/DeviceBrowserTemplate.py", line 349, in content write(filter(VFS(SL + [globals(), __builtin__],"myContent",True), rawExpr='$myContent')) # from line 219, col 3. File "/usr/lib/python2.3/site-packages/Cheetah/Filters.py", line 106, in filter return str(val) File "/usr/lib/python2.3/site-packages/forgetHTML.py", line 206, in __str__ return self.output() File "/usr/lib/python2.3/site-packages/forgetHTML.py", line 223, in output result = result + element.output(indent+1) # increased indent level File "/usr/lib/python2.3/site-packages/forgetHTML.py", line 223, in output result = result + element.output(indent+1) # increased indent level File "/usr/lib/python2.3/site-packages/forgetHTML.py", line 523, in output self._generateContent() File "/usr/lib/python2.3/site-packages/forgetHTML.py", line 514, in _generateContent column = TableCell(column) File "/usr/lib/python2.3/site-packages/forgetHTML.py", line 175, in __init__ self.extend(add) File "/usr/lib/python2.3/site-packages/forgetHTML.py", line 253, in extend self.append(element) File "/usr/lib/python2.3/site-packages/forgetHTML.py", line 266, in append raise ElementNotAllowedError, repr(element) ElementNotAllowedError: Element not allowed: False Hva er galt? Peder Sefland

1 0

spm om snmpwalk og cgi-skript på nav3 (debian)
by peder.sefland＠hivolda.no 20 Sep '04

20 Sep '04

Har f?tt opp nav3 og mye fungerer Men p? Cricket har jeg en utfordring. Cricket samler inn data og lager targets, men n?r jeg trykker p? Statistics kommer bare innholdet i cgi-skriptet opp. #!/usr/bin/perl -w # -*- perl -*- # Cricket: a configuration, polling and data display wrapper for RRD files ...... Det ser ut som det nesten er bare cricket som bruker cgi. Er det noen andre som vet hvilken cgi-innstillinger som blir feil n?r man kopierer apache2.conf fila til nav over den orginale p? Debian Sarge? Sp?rsm?l nr 2 P? min nav2.1.5 (redhat 7.3) kunne jeg kj?re snmpwalk med kommandoen N?r jeg kj?r snmpwalk -On 158.38.75.42 xxxx system Men p? debian-boxen f?r jeg denne feilmeldingen. > xxxx: Unknown Object Identifier (Sub-id not found: (top) -> xxxxx) > (xxx=har fjernet passord) Peder Sefland

1 0

Nav3 fanger ikke opp at boks er neder
by odd.hauge＠hiMolde.no 06 Sep '04

06 Sep '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Jepp. Det ser mye bedre ut n?. Eventengine er n? i ferd med ? t?mmes... - - odd arne - -----Original Message----- From: Kristian Eide [mailto:kreide@online.no] Sent: Sun 05-Sep-04 20:26 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] Nav3 fanger ikke opp at boks er neder - -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Det er en melding som g?r igjen: > SQLException for update statement: INSERT INTO alertq > (alertqid,source,deviceid,netboxid,subid,time,eventtypeid,alerttypeid,state >,value,severity) VALUES ('3849580','pping','93','84',null,'2004-09-01 > 18:43:59','boxState',(SELECT alerttypeid FROM alerttype WHERE > alerttype='boxDownWarning'),'x','1','50') java.sql.SQLException: ERROR: > More than one tuple returned by a subselect used as an expression. Aha, det forklarer nok saken. Jeg vil tro at det som settes inn i alerttype-tabellen fra manage.sql p? en eller annen m?te har blitt kj?rt dobbelt hos deg, slik at innholdet i alettype-tabellen har kommet inn flere ganger. Det enkleste er nok ? ta en 'DELETE FROM alerttype' og s? kj?re alle 'INSERT INTO alerttype ...' linjene du finner i manage.sql. Restart s? eventEngine. L?ser det problemet? - - -- Kristian - -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFBO1pBRBuET7ul/ccRAjkIAJwMFE3LgcLOTeUEAA/QWTF7nVJfkACfWAYv 2OeqLIStbzcVt2/a9ommxtE= =dEbc - -----END PGP SIGNATURE----- -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFBO3G9RBuET7ul/ccRAkBZAJwKO6Ktvfmy60ya+VW2yVkSPnN2mQCeL4j0 9GgtqoBeuTKYJ/BbNONqQC8= =Wip5 -----END PGP SIGNATURE-----

1 0

Nav3 fanger ikke opp at boks er neder
by odd.hauge＠hiMolde.no 05 Sep '04

05 Sep '04

Det er en melding som g?r igjen: SQLException for update statement: INSERT INTO alertq (alertqid,source,deviceid,netboxid,subid,time,eventtypeid,alerttypeid,state,value,severity) VALUES ('3849580','pping','93','84',null,'2004-09-01 18:43:59','boxState',(SELECT alerttypeid FROM alerttype WHERE alerttype='boxDownWarning'),'x','1','50') java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression. - odd arne -----Original Message----- From: Kristian Eide [mailto:kreide@online.no] Sent: Sun 05-Sep-04 20:14 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] Nav3 fanger ikke opp at boks er neder -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Jo da. eventengine kj?rer. B?de f?r og etter restart. Se under. Har du tittet p? loggfilen til eventEngine? Av spesiell interesse er log/eventEngine/eventEngine-stderr.log (og evt. andre filer i samme dir). - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFBO1d/RBuET7ul/ccRAmEyAKDAQughapBx+Vy/e2psWwpQEBGH0QCfUigK iAj8MiWdixNuBKDxfGODf8A= =wI1X -----END PGP SIGNATURE-----

2 1

Nav3 fanger ikke opp at boks er neder
by odd.hauge＠hiMolde.no 05 Sep '04

05 Sep '04

Jo da. eventengine kj?rer. B?de f?r og etter restart. Se under. - odd arne [root] ps axwww | grep -i eventengine 17987 ? S 0:00 /usr/java/j2re1.4.2_04/bin/java -Xincgc -Xmx268435456 -cp eventEngine.jar:.:/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/java/Database.jar:/usr/local/nav/lib/java/Event.jar:/usr/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.jar eventEngine 24504 pts/0 S 0:00 grep -i eventengine [root]# /usr/local/nav/bin/nav stop eventengine Shutting down eventEngine: Ok [root]# ps axwww | grep -i eventengine 24620 pts/0 S 0:00 grep -i eventengine [root]# /usr/local/nav/bin/nav start eventengine Starting eventEngine: bash: /root/.bashrc: Permission denied bash: /root/.bashrc: Permission denied Ok [root]# ps axwww | grep -i eventengine 24635 pts/0 S 0:00 /usr/java/j2re1.4.2_04/bin/java -Xincgc -Xmx268435456 -cp eventEngine.jar:.:/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/java/Database.jar:/usr/local/nav/lib/java/Event.jar:/usr/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.jar eventEngine 24648 pts/0 S 0:00 grep -i eventengine -----Original Message----- From: Kristian Eide [mailto:kreide@online.no] Sent: Sun 05-Sep-04 19:17 To: nav-users(a)itea.ntnu.no Cc: Hauge Odd Arne Subject: Re: [Nav-users] Nav3 fanger ikke opp at boks er neder -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Nav3 hos meg fanger ikke opp at boks er nede. SELECT COUNT(*) FROM eventq; > sier at det er over 47000 records i eventq, og eventq bare vokser. > "bin/nav status" sier at b?de alertengine og eventengine kj?rer. Her m? > vel v?re noe som er feil ? Jeg vil tro eventEngine her har stoppet uten at nav status skj?nner dette. Kan du pr?ve ? ta en restart av eventEngine, og s? sjekke om den faktisk kj?rer (med ps axwww | grep -i eventengine)? - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFBO0oSRBuET7ul/ccRAsPZAJ9OjTiQsYyorDCWnDyLG4nsHDnXqQCgwFUj 3i+hURzwsyLkI8z9LFBVfhA= =p4wG -----END PGP SIGNATURE-----

2 1

Nav3 fanger ikke opp at boks er neder
by odd.hauge＠hiMolde.no 05 Sep '04

05 Sep '04

Hei. Nav3 hos meg fanger ikke opp at boks er nede. SELECT COUNT(*) FROM eventq; sier at det er over 47000 records i eventq, og eventq bare vokser. "bin/nav status" sier at b?de alertengine og eventengine kj?rer. Her m? vel v?re noe som er feil ? mvh Odd Arne Hauge

2 1

litt start problem med nav3
by peder.sefland＠hivolda.no 03 Sep '04

03 Sep '04

Har pr?vd ? f?lge oppskriften til "Installation of NAV on Red Hat 9.0" Version 2.0 using apache 2.0 Mange av servicene kommer opp men ikke alle. /usr/local/nav/bin/nav status mactrace: Up cricket: Up eventEngine does not seem to be running... iptrace: Up maintengine: Up servicemon.py does not seem to be running... smsd.pl does not seem to be running... thresholdMon: Up networkDiscovery: Up logengine: Up safe_smsd: Up Alertengine is not running. backup: Up pping.py does not seem to be running... getDeviceData does not seem to be running... I tillegg har jeg problem med httpd2.conf.example filen som jeg har byttet ut med den orginale Den gir denne feilmeldingen Starting httpd: Syntax error on line 91 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps mis-spelled or defined by a module not included in the server configuration [FAILED] I instruksjonen st?r det at vi skal legge inn httpd via apt-get. Blir apache riktig compliert med mod_php4 og mod_python da? Peder Sefland

1 0

Problemer i Nav3 beta 7
by odd.hauge＠hiMolde.no 31 Aug '04

31 Aug '04

Hei. VlanPlot min feil. Etter ? ha kopiert de nye war-filene under /usr/local/nav/apache/webapps til tomcat's webapps katalog l?ste dette seg. N? f?r jeg kart tegnet opp. Men det andre st?r jeg ved (enn s? lenge i alle fall) - Odd Arne vlanPlot virker ikke for meg i siste beta. Intet kart tegnes, men https://apc98.himolde.no/vPServer/servlet/vPServer?section=boks&gruppeid=0&… <https://apc98.himolde.no/vPServer/servlet/vPServer?section=boks&gruppeid=0&…> gir fornuftig output. Hva kan da v?re galt ?

1 0

Problemer i Nav3 beta 7
by odd.hauge＠hiMolde.no 31 Aug '04

31 Aug '04

Hei. Jeg har vel mailet om neo av dette f?r men jeg pr?ver igjen. F?r ikke avledet vlan p? switcher i Kristiansund, rapportene viser i hvert fall ikke vlan for sitchportene. Vlan rutes her via Uninetts ruter, ingen vlan ruting i lag 3 switch. Vlan avledes p? ruter, men ikke p? switch. Trunker og boks bak oppdages riktig. Hva kan jeg sjekke for ? kontrollere om vlan avledes for de 2 switchene jeg har i Kristiansund ? Vlan for switchene i Kristiansund avledes for?vrig fint i Nav2, og jeg tror jeg fikk disse problemene n?r beta5 kom. Har pr?vd ? slette og registrere utstyret i Kristiansund p? nytt uten at det hjalp. Har problemer med f?lgende typer utstyr: Cisco 1721 ruter. Lar seg fint registrere, men i f?lge rapportene oppdages ingen gw-porter HP ProCurve 5308XL switcher m/ lag 3: Ingen gw-porter finnes i rapportene, vlan avledes tilsynelatende ikke. Men boks bak og trunk er riktig. vlanPlot virker ikke for meg i siste beta. Intet kart tegnes, men https://apc98.himolde.no/vPServer/servlet/vPServer?section=boks&gruppeid=0&… gir fornuftig output. Hva kan da v?re galt ? ./dump.py -t netbox gir f?lgende: #roomid:ip:orgid:catid:[ro:serial:rw:function:subcat1:subcat2..] Traceback (most recent call last): File "./dump.py", line 258, in ? main() File "./dump.py", line 255, in main handler() File "./dump.py", line 69, in netbox categories = box.getChildren(manage.Netboxcategory) File "/usr/local/lib/python2.2/site-packages/forgetSQL.py", line 895, in getChildren return forgetter.getAll(whereList, orderBy=orderBy) File "/usr/local/lib/python2.2/site-packages/forgetSQL.py", line 763, in getAll ids = cls.getAllIDs(where, orderBy=orderBy) File "/usr/local/lib/python2.2/site-packages/forgetSQL.py", line 825, in getAllIDs cls._sqlPrimary, orderBy=orderBy) File "/usr/local/lib/python2.2/site-packages/forgetSQL.py", line 562, in _prepareSQL raise """ERROR: No fields defined, cannot create SQL. ERROR: No fields defined, cannot create SQL. Maybe sqlPrimary is invalid? Fields asked: ('id',) My fields: {'category': 'netboxcategory.category', 'netbox': 'netboxcategory.netboxid'} dump.py for ?vrige tabeller virker fint. I cricket vises ikke description for router-interfaces og giga-router-interfaces, kun "no descrption available". For switch-ports og giga-switch-ports vises description riktig for alt utstyr untatt HP 5308XL boksene. Ellers er det i web-grensesnittet en liten inkonsekvens i "Current path", Pathen er i enkelte skjermbilder ala Home -> Tools -> EditDB mens i andre skjermbilder er Tools utelatt; feks. Home - > Report. Hva som skal v?re riktig vet jeg ikke. - Odd Arne Hauge

1 0

æøå ÆØÅi editdb
by Ole.S.Hansen＠hit.no 30 Aug '04

30 Aug '04

Jeg kan registrere "???" i Description feltet i http://nav-server.hit.no/editdb/org/edit/ men ikke "H?gskolen i Telemark" Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/var/www/nav/editdb/editdb.py", line 140, in handler output = editPage(req,pageList[table](),request) File "/var/www/nav/editdb/editdb.py", line 444, in editPage selected) File "/var/www/nav/editdb/editdb.py", line 1477, in update executeSQL([sql]) File "/var/www/nav/editdb/editdbSQL.py", line 39, in executeSQL database.execute(sql) ProgrammingError: ERROR: invalid byte sequence for encoding "UNICODE": 0xf86773 UPDATE org SET parent=NULL,descr='H?gskolen i Telemark',orgid='HiT',opt1=NULL,opt3=NULL,opt2=NULL WHERE orgid='HiT' mvh OleS

1 0

[Nav-users] "Småting" for å få NAV til åkompilere
by tlan＠itea.ntnu.no 26 Aug '04

26 Aug '04

M?tte sette rekkef?lgen riktig i denne Makefilen for ? f? ting til ? kompilere (bruker bare listen over hva som avhenger av hva). Det burde vel ogs? nevne hvor man finner det SNMP-biblioteket som SimpleSnmp er avhengig av (evt legge inn .jar-filen i en contrib katalog elns). [root@zeno trunk]# svn diff Index: src/Makefile.in =================================================================== --- src/Makefile.in (revision 2923) +++ src/Makefile.in (working copy) @@ -18,18 +18,18 @@ INSTALLARGS = -DDESTDIR=$(DESTDIR) subdirs = \ - Util \ + Logger \ + vlanPlot \ ConfigParser \ Database \ + Util \ Event \ + NetboxInfo \ eventEngine \ + SimpleSnmp \ getBoksMacs \ getDeviceData \ networkDiscovery \ - Logger \ - NetboxInfo \ - SimpleSnmp \ - vlanPlot \ webapps/navAdmin \ webapps/vPServer Index: src/webapps/vPServer/build.xml =================================================================== --- src/webapps/vPServer/build.xml (revision 2923) +++ src/webapps/vPServer/build.xml (working copy) @@ -125,7 +125,7 @@ <property name="app.path" value="/${app.name}"/> <property name="app.version" value="1.0"/> <property name="build.home" value="${basedir}/build"/> - <property name="catalina.home" value="/usr/local/jakarta-tomcat"/>  + <property name="catalina.home" value="/var/lib/tomcat4"/>  <property name="dist.home" value="${basedir}/dist"/> <property name="manager.url" value="http://localhost:8080/manager"/> <property name="src.home" value="${basedir}/src"/> Index: src/webapps/navAdmin/build.xml =================================================================== --- src/webapps/navAdmin/build.xml (revision 2923) +++ src/webapps/navAdmin/build.xml (working copy) @@ -128,7 +128,7 @@ <property name="app.path" value="/${app.name}"/> <property name="app.version" value="1.0"/> <property name="build.home" value="${basedir}/build"/> - <property name="catalina.home" value="/usr/local/jakarta-tomcat-5.0.16"/>  + <property name="catalina.home" value="/var/lib/tomcat4"/>  <property name="dist.home" value="${basedir}/dist"/> <property name="docs.home" value="${basedir}/docs"/> <property name="manager.url" value="http://localhost:8080/manager"/> catalina.home burde vel fikses fra configure-scriptet? :) -- Thomas >From tlan at itea.ntnu.no Thu Aug 26 00:53:07 2004 From: tlan at itea.ntnu.no (Thomas =?iso-8859-1?Q?Lang=E5s?=) Date: Wed Aug 25 23:53:14 2004 Subject: [Nav-users] =?iso-8859-1?Q?=22Sm=E5tin?= =?iso-8859-1?Q?g=22_for_=E5_f=E5_NAV_til_=E5kompilere?= In-Reply-To: <20040825213816.GA31956(a)stud.ntnu.no> References: <20040825213816.GA31956(a)stud.ntnu.no> Message-ID: <20040825215306.GA32352(a)stud.ntnu.no> Thomas Lang?s: > [root@zeno trunk]# svn diff Index: subsystem/logger/conf/Makefile.in =================================================================== --- subsystem/logger/conf/Makefile.in (revision 2923) +++ subsystem/logger/conf/Makefile.in (working copy) @@ -23,7 +23,7 @@ logger.conf: logger.conf.source $(top_srcdir)/tools/expand.pl logger.conf.source > logger.conf -install: install-web +install: logger.conf install-web install-web: for file in $(files); do \ @@ -31,7 +31,8 @@ done clean: - rm -f *~ + rm -f *~ distclean: clean rm -f Makefile + rm -f logger.conf Index: subsystem/statemon/Makefile.in =================================================================== --- subsystem/statemon/Makefile.in (revision 2923) +++ subsystem/statemon/Makefile.in (working copy) @@ -39,7 +39,7 @@ $(top_srcdir)/tools/expand.pl servicemon.conf.source > servicemon.conf # the install -install: install-lib install-bin install-checker install-conf +install: pping.conf servicemon.conf install-lib install-bin install-checker install-conf install-lib: lib mkdir -p $(DESTDIR)$(rrddir) @@ -71,4 +71,4 @@ distclean: clean find -name '*~' -print0 | xargs --null rm -f - rm Makefile + rm Makefile pping.conf servicemon.conf Index: subsystem/smsd/Makefile.in =================================================================== --- subsystem/smsd/Makefile.in (revision 2923) +++ subsystem/smsd/Makefile.in (working copy) @@ -26,7 +26,7 @@ smsd.conf: smsd.conf.source $(top_srcdir)/tools/expand.pl smsd.conf.source > smsd.conf -install: $(startscripts) install-bin install-scripts install-cron install-conf +install: $(startscripts) smsd.conf install-bin install-scripts install-cron install-conf install-bin: @for file in $(binaries); do \ @@ -57,4 +57,4 @@ rm -f *~ distclean: clean - rm -f Makefile smsd + rm -f Makefile smsd smsd.conf Og s? m?tte dette inn, n? skal ting kompilere meget bedre :) -- Thomas >From lars.hakedal at usit.uio.no Fri Aug 27 19:16:03 2004 From: lars.hakedal at usit.uio.no (Lars H}kedal) Date: Fri Aug 27 18:16:09 2004 Subject: [Nav-users] Hvor kommer Tomcat inn i bildet? Message-ID: <ra4qmoblq4.fsf(a)saruman.uio.no> Er det letegenene mine som har forlatt meg eller mangler "Installasjon av tomcat" i preinstall.txt? Jeg installerer p? RHEL3 og det er ikke helt det samme som ? installere p? RH9, s? det kan jo v?re at RH9 installerer Tomcat? -- Lars H?kedal, larsha(a)usit.uio.no

1 0

NAV2: Cat6509 native
by Rune.Kittelsen＠hia.no 23 Aug '04

23 Aug '04

Hei, Jeg har en cat6509 som er oppgradert fra hybrid til native mode. I hybrid s? jeg lag2 interfacer i giga-switch-ports under boksens switch-navn/ip og lag3/vlan i giga-router-interfaces under MSFCens navn/ip. N? ser jeg kun vlan trafikk under giga-router-interfaces. Jeg ser ingen lag2 interfacer. Boksen er satt med GSW i nettel.txt. Jeg har samme problem med en cat3750-L3. -rune -- +----------------------------------------------------------------------+ ! Rune Kittelsen E-post: Rune.Kittelsen(a)hia.no ! ! H?gskolen i Agder, IT-tjenesten Tlf: 47-38 14 17 99 ! ! (Agder University College) Fax: 47-38 14 17 01 ! ! Gimlemoen 25D, Serviceboks 422 o Privat: 47-38 09 15 93 ! ! N-4604 Kristiansand S, Norway _ /-_ Mob.: 47-91 87 35 02 ! +--------------------------------(_)>(_)-------------------------------+

1 0

RE: dump.py
by odd.hauge＠hiMolde.no 16 Aug '04

16 Aug '04

Litt flaut det her glemte -t (--table). Men en ./dump.py -t netbox gir f?lgende: #roomid:ip:orgid:catid:[ro:serial:rw:function:subcat1:subcat2..] Traceback (most recent call last): File "./dump.py", line 258, in ? main() File "./dump.py", line 255, in main handler() File "./dump.py", line 69, in netbox categories = box.getChildren(manage.Netboxcategory) File "/usr/local/lib/python2.2/site-packages/forgetSQL.py", line 895, in getChildren return forgetter.getAll(whereList, orderBy=orderBy) File "/usr/local/lib/python2.2/site-packages/forgetSQL.py", line 763, in getAll ids = cls.getAllIDs(where, orderBy=orderBy) File "/usr/local/lib/python2.2/site-packages/forgetSQL.py", line 825, in getAllIDs cls._sqlPrimary, orderBy=orderBy) File "/usr/local/lib/python2.2/site-packages/forgetSQL.py", line 562, in _prepareSQL raise """ERROR: No fields defined, cannot create SQL. ERROR: No fields defined, cannot create SQL. Maybe sqlPrimary is invalid? Fields asked: ('id',) My fields: {'category': 'netboxcategory.category', 'netbox': 'netboxcategory.netboxid'} ?vrige opsjoner virker fin; untall --all selvsagt pga. feilmeldingen over. mvh Odd Arne -----Original Message----- From: Stian S?iland [mailto:stain@itea.ntnu.no] Sent: Mon 16-Aug-04 09:13 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: dump.py On 2004-08-16 09:01:23, Hauge Odd Arne wrote: > Hei. > > F?r ikke dump.py til ? virke skikkelig. Har installert Optik, men n?r jeg kj?rer f.eks. python dump.py location > You must select a valid table. Valid tables are: > location > netbox > org > prefix > product > room > service > subcat > type > usage > vendor > > Jeg f?r dette resultatet uansett tabellnavn. Hva kan v?re galt ? Pr?v: ./dump --help Feilmeldingen er tydeligvis ikke spesifikk nok.. Du m? si: ./dump.py --table=location eller ./dump.py -t location Du har ogs? --all for ? dumpe alle tabellene. Jeg har patchet dump.py til ? skrive ut hjelpen ved feil: : stain@isbre ~/navme/subsystem/dbTools;./dump.py usage: dump.py [options] Dumps NAV database to importable files. options: -h, --help show this help message and exit -sSEP, --seperator=SEP use SEP to seperate fields in output, [default :] -tTABLE, --table=TABLE dump data from TABLE -oFILE, --output=FILE dump data to FILE instead of stdout -a, --all dump all tables to files named TABLE.txt ERROR: You must select a valid table. Valid tables are: location netbox org prefix product room service subcat type usage vendor : stain@isbre ~/navme/subsystem/dbTools; -- Stian S?iland Men vi andre klarer ikke ? kalle ITEA systemdrift, NTNU varmen tilbake i peisen. [Jagland] orakel(a)ntnu.no Tlf: 735 91500 =/\=

1 0

Re: dump.py
by stain＠itea.ntnu.no 16 Aug '04

16 Aug '04

On 2004-08-16 09:01:23, Hauge Odd Arne wrote: > Hei. > > F?r ikke dump.py til ? virke skikkelig. Har installert Optik, men n?r jeg kj?rer f.eks. python dump.py location > You must select a valid table. Valid tables are: > location > netbox > org > prefix > product > room > service > subcat > type > usage > vendor > > Jeg f?r dette resultatet uansett tabellnavn. Hva kan v?re galt ? Pr?v: ./dump --help Feilmeldingen er tydeligvis ikke spesifikk nok.. Du m? si: ./dump.py --table=location eller ./dump.py -t location Du har ogs? --all for ? dumpe alle tabellene. Jeg har patchet dump.py til ? skrive ut hjelpen ved feil: : stain@isbre ~/navme/subsystem/dbTools;./dump.py usage: dump.py [options] Dumps NAV database to importable files. options: -h, --help show this help message and exit -sSEP, --seperator=SEP use SEP to seperate fields in output, [default :] -tTABLE, --table=TABLE dump data from TABLE -oFILE, --output=FILE dump data to FILE instead of stdout -a, --all dump all tables to files named TABLE.txt ERROR: You must select a valid table. Valid tables are: location netbox org prefix product room service subcat type usage vendor : stain@isbre ~/navme/subsystem/dbTools; -- Stian S?iland Men vi andre klarer ikke ? kalle ITEA systemdrift, NTNU varmen tilbake i peisen. [Jagland] orakel(a)ntnu.no Tlf: 735 91500 =/\=

1 0

Re: Bug: DeviceManagement
by werner＠uninett.no 13 Aug '04

13 Aug '04

On Fri, Aug 13, 2004 at 04:26:46PM +0200, Stian S?iland wrote: > Feilen indikerer at "f" blir brukt som n?kkel for ? sl? opp noe. > > La meg gjette, du har en lokasjon som heter "flaskepost" eller noe annet > som starter p? F? > > Jeg mistenker at det er denne koden i TreeSelect.py som knekker p? et vis: > > if type(maybe_selected) is str: > string = maybe_selected > maybe_selected = [] > maybe_selected.append(string) > > Jeg har ikke en patch klar til deg n?, men kan du bekrefte at du har "f" > i en eller annen streng der? Stemmer.. lokasjonen er Felttogsveien. - Werner >From odd.hauge at hiMolde.no Mon Aug 16 10:01:23 2004 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Mon Aug 16 09:01:27 2004 Subject: [Nav-users] dump.py Message-ID: <634E424FC73E384DBC0A30A776022C1C01816710(a)rokke.admin.himolde.no> Hei. F?r ikke dump.py til ? virke skikkelig. Har installert Optik, men n?r jeg kj?rer f.eks. python dump.py location You must select a valid table. Valid tables are: location netbox org prefix product room service subcat type usage vendor Jeg f?r dette resultatet uansett tabellnavn. Hva kan v?re galt ? mvh Odd Arne Hauge

1 0

Bug: DeviceManagement
by werner＠uninett.no 13 Aug '04

13 Aug '04

Hallo. Har installert NAV3 beta7, og hvis jeg utf?rer f?lgende prosedyre - Toolbox -> DeviceManagement - Klikker p? f?rste location som kommer opp i lista (har bare en) s? f?r jeg dette: Mod_python error: "PythonHandler deviceManagement" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/var/www/nav/devicemanagement/deviceManagement.py", line 76, in handler output = history(req) File "/var/www/nav/devicemanagement/deviceManagement.py", line 413, in history page.searchbox,page.treeselect = makeTreeSelect(req,serialSearch=True) File "/var/www/nav/devicemanagement/deviceManagement.py", line 1723, in makeTreeSelect selectbox.update(req.form) File "/usr/lib/python2.3/site-packages/nav/web/TreeSelect.py", line 114, in update next.updateOptions(next.prevElement.selectedList) File "/usr/lib/python2.3/site-packages/nav/web/TreeSelect.py", line 361, in updateOptions self.prevElement.initTextColumn)) File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 299, in __getattr__ self.load() File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 378, in load self._loadDB() File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 613, in _loadDB raise NotFound, self._getID() NotFound: ['f'] Hvis jeg klikker p? tilbake-knappen i nettleseren (n? er f?rste location avmerket) og trykker "view history" f?r jeg opp siden hvor jeg kan velge fra- og til-tidspunkt. - Werner >From werner at uninett.no Fri Aug 13 15:07:21 2004 From: werner at uninett.no (Morten Werner Olsen) Date: Fri Aug 13 14:06:59 2004 Subject: [Nav-users] Bug: DeviceManagement In-Reply-To: <20040813120153.GV2749(a)wcc.no> References: <20040813120153.GV2749(a)wcc.no> Message-ID: <20040813120718.GW2749(a)wcc.no> On Fri, Aug 13, 2004 at 02:01:57PM +0200, Morten Werner Olsen wrote: > Har installert NAV3 beta7, og hvis jeg utf?rer f?lgende prosedyre > > - Toolbox -> DeviceManagement > - Klikker p? f?rste location som kommer opp i lista (har bare en) > > s? f?r jeg dette: [klipp] > Hvis jeg klikker p? tilbake-knappen i nettleseren (n? er f?rste > location avmerket) og trykker "view history" f?r jeg opp siden hvor > jeg kan velge fra- og til-tidspunkt. Nogenlunde samme feilmelding f?r jeg hvis jeg klikker p? fliken "Register error event" og klikker p? en location. Forskjellen er her at jeg ogs? f?r samme feilmelding n?r jeg g?r tilbake og klikker register error: Mod_python error: "PythonHandler deviceManagement" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/var/www/nav/devicemanagement/deviceManagement.py", line 65, in handler output = error(req) File "/var/www/nav/devicemanagement/deviceManagement.py", line 477, in error serialSearch=True) File "/var/www/nav/devicemanagement/deviceManagement.py", line 1723, in makeTreeSelect selectbox.update(req.form) File "/usr/lib/python2.3/site-packages/nav/web/TreeSelect.py", line 114, in update next.updateOptions(next.prevElement.selectedList) File "/usr/lib/python2.3/site-packages/nav/web/TreeSelect.py", line 361, in updateOptions self.prevElement.initTextColumn)) File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 299, in __getattr__ self.load() File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 378, in load self._loadDB() File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 613, in _loadDB raise NotFound, self._getID() NotFound: ['f'] - Werner >From werner at uninett.no Fri Aug 13 16:34:45 2004 From: werner at uninett.no (Morten Werner Olsen) Date: Fri Aug 13 15:34:22 2004 Subject: [Nav-users] etc/navAdmin.conf Message-ID: <20040813133442.GZ2749(a)wcc.no> Hallo igjen. Hvis jeg g?r inn p? http://navy/navAdmin/servlet/navAdmin?section=ni&func=visTopologi f?r jeg f?lgende feilmelding fra Tomcat (ikke tatt med alt): java.security.AccessControlException: access denied (java.io.FilePermission /usr/local/nav/etc/navAdmin.conf read) Jeg har konfigurert $sysconfdir til ? v?re /etc/nav, men uasnett s? finner jeg ingen fil som heter navAdmin.conf noen av beta6- eller beta7-installasjonene mine. - Werner >From werner at uninett.no Fri Aug 13 16:58:24 2004 From: werner at uninett.no (Morten Werner Olsen) Date: Fri Aug 13 15:58:00 2004 Subject: [Nav-users] Debian-pakke av NAV3 beta7. Message-ID: <20040813135820.GA2749(a)wcc.no> Hei igjen. N? har jeg en Debian-pakke av NAV3 som installerer ok p? min testmaskin. Hvis noen har mulighet til ? hjelpe til ? teste installasjonsprosedyren og Debian-pakken, kan jeg etterhvert kanskje pr?ve ? f? pakken inn i Debian. Installasjonsprosedyren finnes her: http://skolelinux.no/~werner/nav/install-howto.txt Jeg vil pr?ve ? vedlikeholde en liste over kjente feil (gjelder kun Debian-pakken, og ikke i selve NAV): http://skolelinux.no/~werner/nav/install-bugs.txt Testinstallasjonene jeg har gjort, er utf?rt p? Debian Sarge (testing). Jeg h?per det er greit at feilmeldinger kan sendes til denne lista (nav-users (at) itea.ntnu.no). Hvis ikke regner jeg med at noen sier ifra, slik at jeg kan fikse et alternativ.. - Werner >From stain at itea.ntnu.no Fri Aug 13 17:26:46 2004 From: stain at itea.ntnu.no (Stian =?iso-8859-1?Q?S=F8iland?=) Date: Fri Aug 13 16:26:48 2004 Subject: [Nav-users] Re: Bug: DeviceManagement In-Reply-To: <20040813120718.GW2749(a)wcc.no> References: <20040813120153.GV2749(a)wcc.no> <20040813120718.GW2749(a)wcc.no> Message-ID: <20040813142646.GC31657(a)itea.ntnu.no> On 2004-08-13 14:07:21, Morten Werner Olsen wrote: > File "/var/www/nav/devicemanagement/deviceManagement.py", line 1723, in makeTreeSelect > selectbox.update(req.form) > > File "/usr/lib/python2.3/site-packages/nav/web/TreeSelect.py", line 114, in update > next.updateOptions(next.prevElement.selectedList) > > File "/usr/lib/python2.3/site-packages/nav/web/TreeSelect.py", line 361, in updateOptions > self.prevElement.initTextColumn)) > NotFound: ['f'] Feilen indikerer at "f" blir brukt som n?kkel for ? sl? opp noe. La meg gjette, du har en lokasjon som heter "flaskepost" eller noe annet som starter p? F? Jeg mistenker at det er denne koden i TreeSelect.py som knekker p? et vis: if type(maybe_selected) is str: string = maybe_selected maybe_selected = [] maybe_selected.append(string) Jeg har ikke en patch klar til deg n?, men kan du bekrefte at du har "f" i en eller annen streng der? -- Stian S?iland Etter kl. 23.00 p? hverdager og kl. 24.00 p? ITEA systemdrift, NTNU dager f?r helligdager skal det herske ro i hybelen, orakel(a)ntnu.no samt p? eiendommen for ?vrig. [Voll studentby] Tlf: 735 91500 =/\=

1 0

devicemanagement
by werner＠uninett.no 12 Aug '04

12 Aug '04

Hallo. Er det noen som kan hjelpe meg med noen forslag til hva som kan v?re feil, n?r jeg under http://navy/devicemanagement/ f?r denne feilmeldingen: Mod_python error: "PythonHandler deviceManagement" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/var/www/nav/devicemanagement/deviceManagement.py", line 76, in handler output = history(req) File "/var/www/nav/devicemanagement/deviceManagement.py", line 413, in history page.searchbox,page.treeselect = makeTreeSelect(req,serialSearch=True) File "/var/www/nav/devicemanagement/deviceManagement.py", line 1723, in makeTreeSelect selectbox.update(req.form) File "/usr/lib/python2.3/site-packages/nav/web/TreeSelect.py", line 114, in update next.updateOptions(next.prevElement.selectedList) File "/usr/lib/python2.3/site-packages/nav/web/TreeSelect.py", line 361, in updateOptions self.prevElement.initTextColumn)) File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 299, in __getattr__ self.load() File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 378, in load self._loadDB() File "/usr/lib/python2.3/site-packages/forgetSQL.py", line 613, in _loadDB raise NotFound, self._getID() NotFound: ['f'] P? forh?nd takk for hjelpa. - Werner >From odd.hauge at hiMolde.no Fri Aug 13 12:35:45 2004 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Fri Aug 13 11:35:17 2004 Subject: [Nav-users] RE: AlertEngine Message-ID: <634E424FC73E384DBC0A30A776022C1C01435858(a)rokke.admin.himolde.no> Hei. For meg ser det fortsatt ut som dette er et problem i Beta 7 ogs?. Bokser som er nede rappoteres ikke som nede. Har dere noen ide om hva dette skyldes ? Mvh Odd Arne Hauge > -----Original Message----- > From: Hauge Odd Arne > Sent: Friday, June 11, 2004 3:30 PM > To: Hauge Odd Arne; Morten Vold > Cc: nav-users(a)itea.ntnu.no; Kristian Eide > Subject: Re: AlertEngine > > Og her er vedlegget.... > > - odd arne > > ----- Original Message ----- > From: "Odd Arne Hauge" <odd.hauge(a)himolde.no> > To: "Morten Vold" <morten.vold(a)itea.ntnu.no> > Cc: <nav-users(a)itea.ntnu.no>; "Kristian Eide" <kreide(a)online.no> > Sent: Friday, June 11, 2004 3:28 PM > Subject: Re: AlertEngine > > > > Vedlagt f?lger et utdrag av eventengine.log. > > HAr noe DNS-mimatch som g?r igjen. Ellers ser jeg ingenting > spesielt. > > > > - odd arne > > > > > > ----- Original Message ----- > > From: "Morten Vold" <morten.vold(a)itea.ntnu.no> > > To: "Odd Arne Hauge" <odd.hauge(a)hiMolde.no> > > Cc: <nav-users(a)itea.ntnu.no>; "Kristian Eide" <kreide(a)online.no> > > Sent: Friday, June 11, 2004 3:01 PM > > Subject: Re: AlertEngine > > > > > > > -----BEGIN PGP SIGNED MESSAGE----- > > > Hash: SHA1 > > > > > > Odd Arne Hauge wrote: > > > > > > >>1. I psql, managadatabasen, skriv: SELECT * FROM eventq; > > > > Der ligger det ca. 12850 rader. Se velagte fil for en > del av radene. > > > > > > Ok - her er det noe veldig rart som foreg?r, for eventq skal v?re > > > tiln?rmet tom s? lenge eventEngine behandler eventer. > > > > > > >>2. Sjekk om eventEngine kj?rer. > > > > eventEngine (pid 10483) is running... > > > > > > Ser du noe i loggene til eventEngine da? Den b?r ha sett > eventene i > > > eventq, og fors?kt ? gj?re noe med dem... > > > > > > Kristian, ser du hva som er galt her? > > > > > > > > > - -- > > > Morten Vold > > > NTNU ITEA Nettgruppen > > > -----BEGIN PGP SIGNATURE----- > > > Version: GnuPG v1.2.4 (GNU/Linux) > > > Comment: Using GnuPG with Debian - http://enigmail.mozdev.org > > > > > > iD8DBQFAya0RXxIl0kpcOkQRAvtdAKDyDGM8J+u+geUKQdvcSs5EyFkMPwCfbSoo > > > fnuqLmSbzvmVrj8UEbIYp80= > > > =vp1n > > > -----END PGP SIGNATURE----- > > > >

1 0

SV: [Nav-users] getDeviceData kjører ikke.
by werner＠uninett.no 04 Aug '04

04 Aug '04

On Wed, Jul 28, 2004 at 10:10:14AM +0200, Morten Vold wrote: > > Det er ut til ? g? greit for eventEngine, men tydelig vis ikke for > > getDeviceData... > > Dette er ganske snedig, for i utgangspunktet er getDeviceData skrevet > slik at den forventer ? finne katalogene `device-plugins` og > `data-plugins` i st?ende katalog (den er ikke avhengig av at disse > finnes i CLASSPATH eller lignende, da den laster klassene i disse > katalogene dynamisk). Derfor vil getDeviceData.sh ta en "cd > /usr/local/nav/lib/java/getDeviceData" f?r den kj?rer getDeviceData. > > > Jeg pr?vde ? gj?re slik: > [...] > > for file in `find > /usr/local/nav/lib/java/eventEngine/device-plugins/* -path '*.jar*'`; do > > ln -s $file > > done > > > (...osv for eventEngine/handler-plugins, getDeviceData/data-plugins > > og getDeviceData/device-plugins) Litt omstendelig kanskje, men det > > funker. > > Merkelig, sp?r du meg. Jeg lurer p? om problemet i utgangspunktet kan > ha v?rt navneromskollisjon eller lignende (det begynner ? bli en stund > siden jeg var 100% med p? Java-banen). Hvis plugin-klassene allerede > var tilgjengelig gjennom ext-katalogen og gDD i tillegg pr?vde ? hente > dem fra /usr/local/nav/lib/java/getDeviceData/*.jar, s? kunne det ha > skjedd noe muffens her. > > En kommentar fra Kristian kanskje, om han er v?ken? :) Kristian titta p? dette p? NAV-installasjonen til Uninett, og fant ut at feilkilden var java-versjonen (Blackdown). Etter ? ha installert SUNs JDK starter og kj?rer getDeviceData. Jeg skal si ifra n?r jeg har oppdatert installasjonsveiledningen for Debian GNU/Linux. - Werner >From werner at uninett.no Thu Aug 5 16:59:28 2004 From: werner at uninett.no (Morten Werner Olsen) Date: Thu Aug 5 15:59:07 2004 Subject: [Nav-users] Oppdatert installasjonsrutine for Debian GNU/Linux. Message-ID: <20040805135916.GF24084(a)austin.wcc.no> Hallo! Da har jeg oppdatert installasjonsrutinen [1] for Debian GNU/Linux litt. Den viktigste forandringen er overgangen fra Blackdowns JDK til Sun's JDK. Dessverre har jeg ikke f?tt testet rutinen ordentlig, da jeg ikke har noen ledig maskin tilgjengelig for ?yeblikket (kommer i l?pet av uka). Hvis noen finner feil/mangler, v?r snill og si ifra s? skal jeg oppdatere den. Til info er jeg midlertidig ansatt hos Uninett AS for ? tilrettelegge NAV for Debian GNU/Linux, og de overordnede m?lene er ? gj?re flest mulig av NAV's avhengigheter tilgjengelig for og helst i Debian samt ? lage en Debian-pakke av NAV. - Werner [1] http://werner.nvg.org/nav/nav-install-debian.txt >From bredal at itea.ntnu.no Mon Aug 9 14:59:24 2004 From: bredal at itea.ntnu.no (John Magne Bredal) Date: Mon Aug 9 13:58:58 2004 Subject: [Nav-users] Cricket og Catalyst 3750M In-Reply-To: <634E424FC73E384DBC0A30A776022C1C018166F7(a)rokke.admin.himolde.no> References: <634E424FC73E384DBC0A30A776022C1C018166F7(a)rokke.admin.himolde.no> Message-ID: <4117671C.9030006(a)itea.ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hauge Odd Arne wrote: | Hallo. | | himolde har nettopp f?tt en ny Cisco Catalyst 3750 Metro boks. Jeg f?r ikke cricket til ? virke sammen med ruterinterfacene p? denne. Noen som har et hint ? | | F?r f?lgende meldinger: | /usr/local/nav/cricket/cricket/collector /giga-router-interfaces | Possible precedence problem on bitwise | operator at /usr/local/nav/lib/perl/BER.pm line 601. | [27-Jul-2004 17:32:21 ] Starting collector: Cricket version 1.0.3 (2001-11-06) | [27-Jul-2004 17:32:22*] Found unknown tag 'interface-index' during expansion of '%interface-index%'. | [27-Jul-2004 17:32:22 ] Walking ifIndex for 128.39.47.130:161 to resolve interface-index mapping | [27-Jul-2004 17:32:22*] Failed to map instance for 2. Instance is now set to nothing. | [27-Jul-2004 17:32:22*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10 | [27-Jul-2004 17:32:22 ] Retrieved data for 2 (): U,U,U,U,U,U | [27-Jul-2004 17:32:22 ] Some data is missing for 2 (). Skal vi se... Jeg regner her med at det er snakk om NAV-v2. Det er ingen grunn til at dette ikke skal fungere s? lenge dataene i databasen er korrekte. Det ser derimot ut som om det er en feil i konfigurasjonsfilen til Cricket for denne boksen. Kan du sende denne filen til meg (gjerne ikke til hele mail-listen :) ) s? kan jeg se om jeg finner ut hva som er feil. Filen skal ligge under /home/navcron/cricket/cricket-config/switch-ports/%switch%/ med navn ports. mvh. - -- John Magne Bredal Overingeni?r NTNU Nettgruppa Tlf: 735 90250 Mob: 918 97366 "If you get collisions on a wireless LAN, do you see sparks in mid-air?" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFBF2ccAp7KRQ8nSI8RAgXKAJ499Emjte/JOB37Hc/Dzf1dbvQfOQCgs6YP nEwlGiEFXckKR8JxiR4xeow= =Wjh5 -----END PGP SIGNATURE----- >From SteinarOtto.Sjoholt at hials.no Wed Aug 11 14:04:40 2004 From: SteinarOtto.Sjoholt at hials.no (=?iso-8859-1?Q?Steinar_Otto_Sj=F8holt?=) Date: Wed Aug 11 13:04:14 2004 Subject: [Nav-users] 3Com Message-ID: <9BB62D6DBD193B4AAB2556FC905DF8D704F2B9(a)stork.hials.no> Hei! Her p? H?gskolen i ?lesund har vi et rimelig rent 3Com milj? (SW3300/SW4400 24-porter 10/100 m/gigafiber uplink til SW4005 sentralsvitsj). Har etter hvert funnet ut at NAV's 3com st?tte er heller begrensa. (ikke vlan f.eks). Er det noen andre der ute i NAV land som har 3Com utstyr og i s? tilfelle hva slags? Har selv begynnt ? programmere egen device-plugin til getDeviceData for 3com utstyret v?rt. Mvh Steinar --- Steinar Otto Sj?holt Avd. ing - IT H?gskolen i ?lesund

1 0

EditDb og serienummer på ip devicer
by SteinarOtto.Sjoholt＠hials.no 02 Aug '04

02 Aug '04

Hei! Lurer litt p? hvor serienummeret som (av og til) oppdages av editDb kommer fra? (Er getDD inne i bildet her?) Grunnen er noen fors?k jeg har gjort her. Ingen av switchene (3com) (med 1 unntak) og den ene routeren (Cisco 7206) vi har kom opp med serienr uten "UPDATE snmpoid set uptodate='f';" ?velsen i databasen. Unntaket var 3com Switch 4005 (sentralswitchen v?r) som spratt opp med serienr med en gang jeg hadde registert utstyrstypen. Riktig nok ser det ut til ? v?re serienummeret til det f?rste fiberkortet som kom og ikke serienr til chassis'et som vel hadde v?rt mer riktig... Steinar

1 0

Rapport feil
by magnus＠ntnu.no 28 Jul '04

28 Jul '04

Steinar Otto Sj?holt: > Configuration error! The report generator is not able to do such things.ERROR: relation "typesnmpoid" does not exist SELECT typename,oidkey,snmpoid,typesnmpoid.frequency,typeid FROM type JOIN typesnmpoid USING (typeid) JOIN snmpoid USING (snmpoidid) WHERE typeid = '27' ORDER BY typename,oidkey,snmpoid LIMIT 100 OFFSET 0 > > Feil i databasen min eller i rapport modulen? Det der er en feil i rapporten. Endringen i databasen ble vel gjort rundt beta4 hvis jeg husker riktig. Det hadde v?rt veldig fint om du kunne rapportere dette som en bug i bugtraqeren, slik at vi er sikker p? ? fange den opp. Takk for tipset! -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc >From gro-anita.vindheim at itea.ntnu.no Thu Jul 29 12:07:52 2004 From: gro-anita.vindheim at itea.ntnu.no (Gro-Anita H. Vindheim) Date: Thu Jul 29 11:07:35 2004 Subject: [Nav-users] Rapport feil In-Reply-To: <20040728184730.GA8705(a)stud.ntnu.no> References: <9BB62D6DBD193B4AAB2556FC905DF8D704F29E(a)stork.hials.no> <20040728184730.GA8705(a)stud.ntnu.no> Message-ID: <200407291107.52939.gro-anita.vindheim(a)itea.ntnu.no> On Wednesday 28 July 2004 20:47, Magnus Nordseth wrote: > Steinar Otto Sj?holt: > > Configuration error! The report generator is not able to do such > > things.ERROR: relation "typesnmpoid" does not exist SELECT > > typename,oidkey,snmpoid,typesnmpoid.frequency,typeid FROM type JOIN > > typesnmpoid USING (typeid) JOIN snmpoid USING (snmpoidid) WHERE > > typeid = '27' ORDER BY typename,oidkey,snmpoid LIMIT 100 OFFSET 0 > > > > Feil i databasen min eller i rapport modulen? > > Det der er en feil i rapporten. Endringen i databasen ble vel gjort > rundt beta4 hvis jeg husker riktig. Det hadde v?rt veldig fint om du > kunne rapportere dette som en bug i bugtraqeren, slik at vi er sikker > p? ? fange den opp. Dette var en feil/forglemmelse i config-fila til rapportgeneratoren. Er fikset n?, og kommer i neste release. De som ?nsker ? fjerne denne selv, kan g? inn i /usr/local/nav/etc/report/report.conf og fjerne alle linjer som refererer til 'typesnmpoid'. Gro-Anita -- --- Gro-Anita Vindheim NTNU, ITEA, NETT Gro-Anita.Vindheim(a)itea.ntnu.no >From odd.hauge at hiMolde.no Sat Jul 31 13:30:04 2004 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Sat Jul 31 12:29:43 2004 Subject: [Nav-users] NAV 3.0 beta 7 og vlanPlot, problemer med switcher i Kristiansund Message-ID: <634E424FC73E384DBC0A30A776022C1C018166F8(a)rokke.admin.himolde.no> Hallo. Jeg har f?tt problemer med vlanPlot igjen. Ingen rutere eller linknett vises. Url'en https://apc98.himolde.no/vPServer/servlet/vPServer?section=boks&gruppeid=0&… gir fornufig output, WEB_HOST i nav.conf er satt riktig. Hva kan da v?re galt hos meg ? Sliter fortsatt med ? f? avledet VLAN fra switchene som st?r i Kristiansund. Rapportene viser i hvert fall ikke VLAN fro disse 2 switrchene. Har tilsvarende switcher i Molde med samme sw-versjon, og her virker dette fint. Nav2 avleder ogs? VLAN fra switchene i Kristiansund uten problemer. Hva kan v?re feil ? mvh Odd Arne .

1 0

SV: [Nav-users] Mangler editdb.conf
by odd.hauge＠hiMolde.no 28 Jul '04

28 Jul '04

Jeg finner ikke editdb.conf i rpm-pakken heller. rpm -qpl nav-3.0_beta7-1.noarch.rpm |grep editdb.conf gir intet treff. Har kopiert den fra tarballen. Forrige "problem" ser ut til ? v?re l?st. Feil rettigheter for navread og navwrite for de nye tabellene. - odd arne -----Original Message----- From: nav-users-bounces(a)smtp.ansatt.ntnu.no on behalf of Morten Vold Sent: Mon 26-Jul-04 12:28 To: Steinar Otto Sj?holt Cc: nav-users(a)itea.ntnu.no; Hans J?rgen Hoel Subject: Re: SV: [Nav-users] Mangler editdb.conf -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Steinar Otto Sj?holt wrote: > Vel, fant fila til slutt i subsystem/editdb/src i kildekodetreet... > Her er i alle fall Makefile som skulle ha gjort jobben... Funka > tydeligvis ikke... > install-conf: > @for file in $(conffiles); do \ > target=$(DESTDIR)$(sysconfdir)/$$file; \ > if [ -f "$$target" ]; then \ > echo Skipping installation of config file $$file; \ > else \ > $(INSTALL) -v -D -m 644 $$file $$target || exit 1; \ > fi; \ > done Jeg tok en titt p? dette n?, og det viser seg at denne regelen er indentert med space og ikke tab som f?rste tegn, noe make vanligvis rynker p? nesen av. Det er n? fikset og blir med i neste release. - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFBBNyzXxIl0kpcOkQRAoV6AJsF7QoM9qkt9Cndi+OID6EttocIsQCeMh80 ApUc+qskH4kVJHSRNlNEUZ4= =MLZl -----END PGP SIGNATURE----- _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

2 1

Cricket og Catalyst 3750M
by odd.hauge＠hiMolde.no 27 Jul '04

27 Jul '04

Hallo. himolde har nettopp f?tt en ny Cisco Catalyst 3750 Metro boks. Jeg f?r ikke cricket til ? virke sammen med ruterinterfacene p? denne. Noen som har et hint ? F?r f?lgende meldinger: /usr/local/nav/cricket/cricket/collector /giga-router-interfaces Possible precedence problem on bitwise | operator at /usr/local/nav/lib/perl/BER.pm line 601. [27-Jul-2004 17:32:21 ] Starting collector: Cricket version 1.0.3 (2001-11-06) [27-Jul-2004 17:32:22*] Found unknown tag 'interface-index' during expansion of '%interface-index%'. [27-Jul-2004 17:32:22 ] Walking ifIndex for 128.39.47.130:161 to resolve interface-index mapping [27-Jul-2004 17:32:22*] Failed to map instance for 2. Instance is now set to nothing. [27-Jul-2004 17:32:22*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10 [27-Jul-2004 17:32:22 ] Retrieved data for 2 (): U,U,U,U,U,U [27-Jul-2004 17:32:22 ] Some data is missing for 2 (). mvh Odd Arne

1 0

SV: [Nav-users] getDeviceData kjører ikke.
by SteinarOtto.Sjoholt＠hials.no 27 Jul '04

27 Jul '04

Hei! St?tte p? samme problemet p? min boks. (Mandrake 10, men har brukt b?de MortenV's preinstall_apache2.txt og MortenO's Debian oppskrift). Problemet ligger i m?ten .jar filene er symlinka fra /usr/local/nav/lib/java i MortenO's oppskrift. PluginMonitorTask (constructoren) forventer ? finne to kataloger ("data-plugins" og "device-plugins"), og siden Morten linker .jar filene slik: - cd /usr/lib/j2se/; rmdir ext; ln -s /usr/share/java ext; cd ext; for file in `find /usr/local/nav/lib/java/* -path '*.jar*'`; do ln -s $file done Blir alle linkene liggende i direkte i "ext" katalogen. Det er ut til ? g? greit for eventEngine, men tydelig vis ikke for getDeviceData... Jeg pr?vde ? gj?re slik: (i "ext" katalogen) for file in `find /usr/local/nav/lib/java/* -path '*.jar*' -maxdepth 0`; do ln -s $file done mkdir -p eventEngine/device-plugins mkdir -p eventEngine/handler-plugins mkdir -p getDeviceData/data-plugins mkdir -p getDeviceData/device-plugins cd eventEngine; ln -s /usr/local/nav/lib/java/eventEngine/eventEngine.jar cd device-plugins for file in `find /usr/local/nav/lib/java/eventEngine/device-plugins/* -path '*.jar*'`; do ln -s $file done (...osv for eventEngine/handler-plugins, getDeviceData/data-plugins og getDeviceData/device-plugins) Litt omstendelig kanskje, men det funker. Steinar -----Opprinnelig melding----- Fra: nav-users-bounces(a)mailhost.itea.ntnu.no [mailto:nav-users-bounces@mailhost.itea.ntnu.no] P? vegne av Morten Werner Olsen Sendt: 28. juni 2004 20:39 Til: nav-users(a)itea.ntnu.no Emne: [Nav-users] getDeviceData kj?rerikke. Hallo. Har litt problemer med ? f? getDeviceData til ? kj?re. eventEngine fungerer fint etter at jeg symlinket inn alle jar-filene til /usr/lib/j2se/ext/, men getDeviceData gir denne feilmelding i loggen sin: Exception in thread "main" java.lang.NoSuchMethodError: PluginMonitorTask.<init>(Ljava/lang/String;Ljava/util/Map;Ljava/lang/String;Ljava/util/Map;)V at getDeviceData.main(getDeviceData.java:161) Dette er p? en Debian sarge boks. Noen som har en ide om hva som kan v?re galt? - Werner _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

Release-notice: NAV 3.0 beta 7
by edprp＠it.uib.no 26 Jul '04

26 Jul '04

Hei ! Noen tilbakemeldinger fra en FreeBSD installasjon : Fremdeles m? jeg kj?re cd src; gmake; cd ..; gmake for ? f? kompilert alt. Joda, jeg benytter anbefalte "milj?variabler" i bash. "install -D" problemet, FreeBSD og andre Unix varianter har ikke kjenskap til "-D" opsjonen. Apache-2.0.50 + mod_python-3.1.3 gir meg f?lgende feilmelding i error-log filen : [Fri Jul 23 14:41:11 2004] [notice] mod_python: (Re)importing module 'nav.web' Fatal Python error: PyThreadState_Delete: tstate is still current [Fri Jul 23 14:41:12 2004] [notice] child pid 72788 exit signal Abort trap (6) -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no

2 1

SV: [Nav-users] Mangler editdb.conf
by SteinarOtto.Sjoholt＠hials.no 26 Jul '04

26 Jul '04

Vel, fant fila til slutt i subsystem/editdb/src i kildekodetreet... Her er i alle fall Makefile som skulle ha gjort jobben... Funka tydeligvis ikke... Mvh Steinar ------------------------------------------------------------------------------------ # Generated automatically from Makefile.in by configure. SHELL = /bin/sh INSTALL = /usr/bin/install -c CHEETAH = /usr/bin/cheetah prefix = /usr/local/nav exec_prefix = ${prefix} bindir = ${exec_prefix}/bin libdir = ${exec_prefix}/lib sysconfdir = ${prefix}/etc pythonlibdir = ${libdir}/python templatedir = ${pythonlibdir}/nav/web/templates webroot = ${prefix}/apache/webroot templates = editdbTemplate.py files = editdb.py editdbSQL.py editTables.py initBox.py .htaccess conffiles = editdb.conf .PHONY: all install install-lib install-bin install-web clean distclean install-conf all: $(templates) $(templates): %.py: %.tmpl $(CHEETAH) compile $< install: install-lib install-web install-conf install-lib: $(templates) for file in $(templates); do \ $(INSTALL) -v -D -m 644 $$file $(DESTDIR)$(templatedir)/$$file || exit 1; \ done install-web: for file in $(files); do \ $(INSTALL) -v -D -m 644 $$file $(DESTDIR)$(webroot)/editdb/$$file || exit 1; \ done install-conf: @for file in $(conffiles); do \ target=$(DESTDIR)$(sysconfdir)/$$file; \ if [ -f "$$target" ]; then \ echo Skipping installation of config file $$file; \ else \ $(INSTALL) -v -D -m 644 $$file $$target || exit 1; \ fi; \ done clean: rm -f *~ rm -f $(templates) distclean: clean rm -f Makefile -------------------------------------------------------------------------------------------------- -----Opprinnelig melding----- Fra: nav-users-bounces(a)mailhost.itea.ntnu.no [mailto:nav-users-bounces@mailhost.itea.ntnu.no] P? vegne av Steinar Otto Sj?holt Sendt: 23. juli 2004 13:10 Til: nav-users(a)itea.ntnu.no Emne: [Nav-users] Mangler editdb.conf Hei! Har akkurat f?tt opp beta 7 her. Vel, webgrensesnittet ser i alle fall ut til ? funke... nesten.... F?r en feil: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 122, in handler readConfig() File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 155, in readConfig config = nav.config.readConfig(CONFIGFILE) File "/usr/lib/python2.3/nav/config.py", line 37, in readConfig file = open(filename, 'r') IOError: [Errno 2] No such file or directory: '/usr/local/nav/etc/editdb.conf' Mvh Steinar Otto Sj?holt Avd. ing - IT H?gskolen i ?lesund _______________________________________________ Nav-users mailing list Nav-users(a)mailman.itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

spm til preinstall.txt
by peder.sefland＠hivolda.no 01 Jul '04

01 Jul '04

Har problem under avsnittet Bygge Python2 uten tr?der ========================= ## Apache p? hauk er rdistet (v1.3), mens pakkene i RH9.0 forventer httpd ## >= 2.0.x, s? her m? vi fikse litt selv. ## mod_python krever en python uten tr?der n?r vi bruker Apache 1.3, s? ## her m? vi koke en egen ekstrautgave av Python. echo "rpm-src ftp://ftp.uninett.no/pub/linux/apt redhat/9/en/i386/redhat os updates-os freshrpms" >> /etc/apt/sources.list Dette feiler p? min maskin. Den finner ikke freshrpms pakkene p? uninett sin ftp-server Err ftp://ftp.uninett.no redhat/9/en/i386/redhat/freshrpms srclist Unable to fetch file, server said '/pub/linux/apt/redhat/9/en/i386/redhat/base/srclist.freshrpms.bz2: No such file or directory ' Failed to fetch ftp://ftp.uninett.no/pub/linux/apt/redhat/9/en/i386/redhat/base/srclist.freshrpms Unable to fetch file, server said '/pub/linux/apt/redhat/9/en/i386/redhat/base/srclist.freshrpms.bz2: No such file or directory ' N?r jeg kj?rer apt-get install readline-devel libtermcap-devel openssl-devel gmp-devel ncurses-devel gdbm-devel zlib-devel expat-devel tetex-latex Mesa-devel tk tix gcc-c++ XFree86-libs pkgconf Reading Package Lists... Done Building Dependency Tree... Done readline-devel is already the newest version. libtermcap-devel is already the newest version. openssl-devel is already the newest version. gmp-devel is already the newest version. ncurses-devel is already the newest version. gdbm-devel is already the newest version. zlib-devel is already the newest version. expat-devel is already the newest version. Package Mesa-devel is a virtual package provided by: XFree86-devel 4.3.0-2.90.55 You should explicitly select one to install. E: Package Mesa-devel has no installation candidate Mesa-devel krever XFree-86-devel, som s? igjen krever XFree86-libs. XFree86-libs er installert, men XFree86-devel krangler p? dependencies fortsatt. rpm -iv /var/cache/apt/archives/XFree86-libs_4.3.0-2.90.55_i386.rpm Forbereder pakker for installasjon... pakke XFree86-libs-4.3.0-2.90.55 er allerede installert [root@nav3 NAV3-filer]# rpm -iv XFree86-devel-4.3.0-2.i386.rpm feil: Failed dependencies: XFree86-libs = 4.3.0-2 is needed by XFree86-devel-4.3.0-2 Peder Sefland

2 1

Installasjon av NAV3(beta6) på Debian
by morten＠gransborg.com 28 Jun '04

28 Jun '04

Hei. Jeg trenger litt hjelp for installasjon av NAV3(beta6) p? Debian. Jeg skulle gjerne hatt oversikt over installerte pakker(kan hentes ut med kommandoen under) og eventuelle tilleggspakker som man m? installere manuelt. Oversikt over installerte pakker kan hentes ut med f?lgende kommando i Debian: dpkg --get-selections P? forh?nd takk. PS! Jeg kj?rer Debian "stable" release, men tar gjerne imot oversikt av pakker for "testing" release ogs?. ---- Kind Regards Morten Gransborg Merkantilveien 35A N-2815 GJ?VIK Mobile: +47 908 64 404 E-mail: morten(a)gransborg.com URL: http://morten.gransborg.com/ msn-messenger: gransborg(a)hotmail.com

3 2

feiler under kompilering av nav3(beta6)
by morten＠gransborg.com 28 Jun '04

28 Jun '04

Jeg fors?ker ? sette opp nav3(beta6) p? en Debian boks. Da jeg kompiler nav s? f?r jeg en feilmelding ved kompileringen av eventEngine. Feilmeldingen er som f?lger: "unmappable character for encoding ASCII" Ser ut som problemet er norske tegn da den viser "?", "?" og "?" som "?" i feilmeldinga. Jeg har norske tegn n?r jeg skriver i konsollet, s? spr?koppsettet burde v?re OK. Er det flere spr?koppsett? Eller kan feilen ligge ett annet sted? H?per noen kan hjelpe meg med dette. -- Morten Gransborg H?gskolen i Gj?vik

2 2

PySNMP versjonsnummer
by morten.vold＠itea.ntnu.no 21 Jun '04

21 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Det viser seg at PySNMP, som vi har basert oss p? blant annet i editdb, har et ganske ustabilt API i versjon 3 (som er egentlig er ustabilt utviklingstre). Det vil med andre ord si at man ikke kan regne med ? f? editdb til virke om man ikke kj?rer samme versjon av PySNMP som vi gj?r her p? NTNU, alts? versjon 3.3.5. Uninett har f?tt erfare problemet, da har pr?vd seg p? versjon 3.4.2. Forh?pentligvis f?r vi etterhvert skrevet om editdb til ? bruke en mer stabil utgave av PySNMP. - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFA1siQXxIl0kpcOkQRAsBWAKDBGWxZTMiTc80r/d9bzdraoIu0nQCeLQ43 WC0XpmB8iPgLmNpOeSiTo0g= =wh6i -----END PGP SIGNATURE----- >From peder.sefland at hivolda.no Wed Jun 23 15:04:45 2004 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Wed Jun 23 14:04:59 2004 Subject: [Nav-users] feilmelding ved endring i varslingsprofilen Message-ID: <s0d98e03.078(a)HVO-3.hivolda.no> Jeg fikk en del feilmeldinger n?r jeg endret min varslingsprofil i nav 2.1.5. Under har jeg limt inn feilmeldingen og etterp? har jeg hentet et utdrag fra meldingssystem4.php Hva kan v?re galt? Warning: Unable to jump to row 0 on PostgreSQL result index 88 in /usr/local/nav/navme/apache/shtdocs/res/varsel/meldingssystem4.php on line 148 Warning: Unable to jump to row 0 on PostgreSQL result index 151 in /usr/local/nav/navme/apache/shtdocs/res/varsel/meldingssystem4.php on line 148 Warning: Unable to jump to row 0 on PostgreSQL result index 166 in /usr/local/nav/navme/apache/shtdocs/res/varsel/meldingssystem4.php on line 148 Warning: Unable to jump to row 0 on PostgreSQL result index 169 in /usr/local/nav/navme/apache/shtdocs/res/varsel/meldingssystem4.php on line 148 utdrag fra meldingssystem4.php 145 $res = pg_exec($dbh_m,"select boksid from boks where sysname='$matches[1]'"); 146 # Ny sp?rring kj?res 147 } 148 $enhet = pg_fetch_row($res,0); 149 $sporring = "insert into unntak (brukerid,trapid,boksid,vtypeid,status) values ($userid[0],$trapid,$enhet[0],".$variable[$matches[0]].",'pluss')"; 150 array_push($sporringer,$sporring); Warning: PostgreSQL query failed: ERROR: parser: parse error at or near "," in /usr/local/nav/navme/apache/shtdocs/res/varsel/meldingssystem4.php on line 184 Warning: PostgreSQL query failed: ERROR: parser: parse error at or near "," in /usr/local/nav/navme/apache/shtdocs/res/varsel/meldingssystem4.php on line 184 Warning: PostgreSQL query failed: ERROR: parser: parse error at or near "," in /usr/local/nav/navme/apache/shtdocs/res/varsel/meldingssystem4.php on line 184 Warning: PostgreSQL query failed: ERROR: parser: parse error at or near "," in /usr/local/nav/navme/apache/shtdocs/res/varsel/meldingssystem4.php on line 184 Innleggene er lagt i databasen. utdrag fra meldingssystem4.php 179 ###################################################################### 180 pg_exec($dbh,"delete from varsel where brukerid=$userid[0] and trapid=$trapid"); 181 pg_exec($dbh,"delete from unntak where brukerid=$userid[0] and trapid=$trapid"); 182 foreach ($sporringer as $sporring) { 183 # echo "$sporring<br>\n"; 184 pg_exec($dbh,$sporring); 185 } Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.) Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.)

1 0

Mailinglisten flyttet
by morten.vold＠itea.ntnu.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Heisann alle nav-users! Vi har n? flyttet listen over fra Majordomo til Mailman, og arkivet over gamle postinger er n? tilgjengelig p? verdensveven: http://mailman.itea.ntnu.no/mailman/listinfo/nav-users P? samme side kan du administrere ditt abonnement p? listen. - -- Morten -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (Cygwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFA0YhRXxIl0kpcOkQRAoTpAJ9EHN4IhaZsnfEu2PfM8EWlBZ++hgCgvy1B nkbaMFv3WOodH5xiLM4uEEI= =lbtH -----END PGP SIGNATURE----- >From odd.hauge at himolde.no Fri Jun 18 14:09:41 2004 From: odd.hauge at himolde.no (Odd Arne Hauge) Date: Fri Jun 18 13:09:50 2004 Subject: [Nav-users] Nav3, Cisco 1721 ruter og HP ProCurve 5308XL Message-ID: <00ff01c45524$c1a42440$6e01a8c0(a)molde.bravida.no> Hei. Jeg har problemer med Nav3 og en cisco 1721 ruter. Nav3 klarer ikke (tilsynelatende) ? avlede GW-porter for denne ruteren. Ingenting rapporteres i hvert fall i Nav, og jeg ser ingenting i gwport tabellen i manage-databasen heller. Nav3 finner serienummer n?r jeg registrerer boksen. Ruteren kj?rer f?lgende ios: Version 12.3(1a). Hva kan v?re galt ? I tillegg skj?nner ikke Nav3 helt en HP ProCurve 5308XL med lag 3 funksjonalitet. Ingen VLAN avledes, og nav finner ingen GW-porter. SW-porter oppdages, men som sagt uten VLAN-informasjon. Skylder ? gj?re oppmerksom p? at det henger en del utstyr med private ip-adresser bak denne enheten. Vet ikke om dette skaper noen form for problemer . R?d/tips mottas med takk. - odd arne

1 0

SV: spørsmål til nav3 installasjon
by kef＠it.hin.no 17 Jun '04

17 Jun '04

Hei Morten Vold said: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > >> Forselv Ketil wrote: > > Ah, ikke alt er helt oppdatert i preinstall.txt ser det ut til nei. > Eksempelkonfigurasjonen finner du i tarballen, under doc/apache/ . Hjalp ikke meg s? mye, f?r ikke opp Websiden. http://nav3.hin.no > > >> Etter en reboot, skjer f?lgende: >> >> [root@Nav3 root]# /usr/local/nav/bin/nav start >> Traceback (most recent call last): >> File "/usr/local/nav/bin/nav", line 54, in ? >> from nav.startstop import * >> ImportError: No module named nav.startstop > Dette skyldes at Python ikke vet hvor den skal finne NAV-bibliotekene. > Beklageligvis ser det ut til at scriptet du skal ha lagt inn i > /etc/profile.d/ ikke blir kj?rt n?r man logger inn som root. Dette > scriptet skal nemlig ta seg av ? sette opp milj?variabler riktig for en > typisk NAV-installasjon. Forel?pig kan du source inn denne helt > eksplisitt i root sin ~/.bashrc - s? b?r du v?re sikker p? at det blir > satt riktig. Det var feilen ja. :-), men alt er nok ikke helt p? plass: [root@Nav3 root]# /usr/local/nav/bin/nav status networkDiscovery: Up cricket: Up eventEngine does not seem to be running... maintengine: Up servicemon.py does not seem to be running... smsd.pl (pid 1072) is running... thresholdMon: Up mactrace: Up iptrace: Up safe_smsd: Up Alertengine is running with process id 1080. It has been running for 30 minutes and 54 seconds. backup: Up pping.py (pid 1142) is running... getDeviceData does not seem to be running... Med nav start f?r jeg ingen feilmelding, men nav status viser at eventEngine, servicemon.py og getDeviceData og ikke kj?rer. ps aux viser at servicemon.py kj?rer: navcron 26118 0.0 1.0 16812 5184 pts/0 S 16:23 0:14 python /usr/local/nav/bin/servicemon.py >> Tar og pakker ut tarballen, og n?r jeg skal pr?ve ? f? den til skjer >> f?lgende n?r jeg kj?rer make: > > Kj?rte du ./configure f?rst? Hva sa den? Problemet her er nemlig at du > ikke har Ant installert (denne mangler i lista over ting som st?r i > INSTALL-fila - denne mangler en god del informasjon fremdeles). Ja, ./configure ble f?rst kj?rt. mvh Ketil > > Uansett er du nok bedre tjent med ? bruke RPM-pakken (og da trenger du > heller ikke ? ha Ant installert). > > - -- > Morten Vold > NTNU ITEA Nettgruppen > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.4 (GNU/Linux) > Comment: Using GnuPG with Debian - http://enigmail.mozdev.org > > iD8DBQFAqem6XxIl0kpcOkQRAsg6AKCLWy3/T3uyABiKUqePEvcLoGlghgCcCQpK > 8HK1IHxWSOs0o/d7ZGi1akE= > =MaSg > -----END PGP SIGNATURE----- >

3 6

Er muligheten for navin.sh til nav2.1.5 fjernet?
by peder.sefland＠hivolda.no 17 Jun '04

17 Jun '04

Skal flytte v?r n?v?rende nav2.1.5 maskin for ? gj?re klar til nav3. Treng ? kj?re navin.sh, men f?r feilmeldingen root@nav2 root]# ./navin.sh --auto NAV installation loader v1.4 Checking to see if your system meets some basic requirements... Looks OK! We need your credentials to connect to the FTP server. ====================================================== Please enter your NAV id name : hivolda Please enter your NAV password: Checking for updated loader at ftpNAV... --09:40:10-- ftp://hivolda:*password*@ftp.nav.ntnu.no/nav/current/navin-* => `/tmp/nav_install/.listing' Resolving ftp.nav.ntnu.no... OK. Connecting to ftp.nav.ntnu.no[129.241.56.118]:21... connected. Logger inn som hivolda ... Logget inn! ==> SYST ... OK. ==> PWD ... OK. ==> TYPE I ... OK. ==> CWD /nav/current ... OK. ==> PORT ... OK. ==> LIST ... Feil i svar fra tjener, lukker kontrollforbindelsen. Pr?ver igjen. Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.)

3 3

RE: SV: spørsmål til nav3 installasjon
by Ketil.Forselv＠hin.no 17 Jun '04

17 Jun '04

Hei Har f?tt installert Nav3, alt ser ut til ? v?re greit: [root@Nav3 root]# /usr/local/nav/bin/nav status networkDiscovery: Up cricket: Up eventEngine (pid 11267) is running... maintengine: Up servicemon.py does not seem to be running... smsd.pl (pid 11298) is running... thresholdMon: Up mactrace: Up iptrace: Up safe_smsd: Up Alertengine is running with process id 11315. It has been running for 2 hours and 13 minutes. backup: Up pping.py (pid 11327) is running... getDeviceData (pid 11341) is running... [root@Nav3 root]# [root@Nav3 root]# /usr/local/apache/libexec/python/bin/python Python 2.2.2 (#1, May 20 2004, 20:15:27) [GCC 3.2.2 20030222 (Red Hat Linux 3.2.2-5)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import psycopg >>> import mx >>> >>> [root@Nav3 root]# men f?r ikke opp WEB-grensesnittet. I error_log f?r jeg f?lgende melding: [Mon May 24 11:24:48 2004] [error] PythonHeaderParserHandler nav.web: Traceback (most recent call last): [Mon May 24 11:24:48 2004] [error] PythonHeaderParserHandler nav.web: File "/usr/local/apache/libexec/python/lib/python2.2/site-packages/mod_python/apac he.py", line 193, in Dispatch\n result = object(req) [Mon May 24 11:24:48 2004] [error] PythonHeaderParserHandler nav.web: File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler\n auth.authenticate(req) [Mon May 24 11:24:48 2004] [error] PythonHeaderParserHandler nav.web: AttributeError: 'module' object has no attribute 'authenticate' Noen som har en ide om hva som er g?tt galt med installasjonen? mvh Ketil

2 1

AlertEngine
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Unnskyld. Nav 2 rapporter switchen som nede, noe som vel er riktig ? Beklager rotet, .... - odd arne ----- Original Message ----- From: "Odd Arne Hauge" <odd.hauge(a)himolde.no> To: <nav-users(a)itea.ntnu.no> Sent: Friday, June 11, 2004 1:02 PM Subject: AlertEngine > Hallo. > > Jeg har en switch som er nede, dvs. management VLAN kan ikke n?s via ping, > telnet eller lignende. > Feilmelding fra NavCron ($CRICKETDIR/cricket/collect-subtrees) sier: > [11-Jun-2004 12:51:13*] No response from "158.38.116.2" [158.38.116.2].161. > Snmpwalk sier: Timeout: No Response from 158.38.116.2. > > GetDeviceData sier: > Jun 11 12:35:43 2004 getDeviceData_08 QUERY_NETBOX_T08-6-RUN Now working > with(119): kristiansund-sw.hiMolde.no, type=wsc295048, ip=158.38.116.2 > (device 72 of 76) > > Boks bak/NetBox Connected kan fortsatt pinges. > > Verken Nav 2 eller Nav 3 rapporterer switchen som nede. > > Har noen en forklaring ? > > - odd arne > > >

1 0

AlertEngine
by morten.vold＠itea.ntnu.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Odd Arne Hauge wrote: >>1. I psql, managadatabasen, skriv: SELECT * FROM eventq; > Der ligger det ca. 12850 rader. Se velagte fil for en del av radene. Ok - her er det noe veldig rart som foreg?r, for eventq skal v?re tiln?rmet tom s? lenge eventEngine behandler eventer. >>2. Sjekk om eventEngine kj?rer. > eventEngine (pid 10483) is running... Ser du noe i loggene til eventEngine da? Den b?r ha sett eventene i eventq, og fors?kt ? gj?re noe med dem... Kristian, ser du hva som er galt her? - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFAya0RXxIl0kpcOkQRAvtdAKDyDGM8J+u+geUKQdvcSs5EyFkMPwCfbSoo fnuqLmSbzvmVrj8UEbIYp80= =vp1n -----END PGP SIGNATURE-----

2 1

SV: AlertEngine
by peder.sefland＠hivolda.no 17 Jun '04

17 Jun '04

Dette ligner litt p? problemet jeg hadde med nav2 f?r jul. Da var det John Magne som var inne ? fikset noe. Men hva vet jeg ikke. P? onsdag 10. desember 2003, 11:48, skrev du: > Flott at du fikk til "Status n?" til ? virke, hva var feilen? Det var dessverre en ny og aldri f?r sett bug i TrapDetect. Jeg laget en fiks for dette p? mandag. Jeg gleder meg til NAV-v3 kommer, den har et mye bedre system enn NAV-v2... Peder Magne Sefland Avd. ingeni?r IT-avd. H?gskulen i Volda Postboks 500 6101 VOLDA 70075284 (kontor) 90823914 (mob.) >>> "Odd Arne Hauge" <odd.hauge(a)hiMolde.no> 11.06.2004 13:02:57 >>> Hallo. Jeg har en switch som er nede, dvs. management VLAN kan ikke n?s via ping, telnet eller lignende. Feilmelding fra NavCron ($CRICKETDIR/cricket/collect-subtrees) sier: [11-Jun-2004 12:51:13*] No response from "158.38.116.2" [158.38.116.2].161. Snmpwalk sier: Timeout: No Response from 158.38.116.2. GetDeviceData sier: Jun 11 12:35:43 2004 getDeviceData_08 QUERY_NETBOX_T08-6-RUN Now working with(119): kristiansund-sw.hiMolde.no, type=wsc295048, ip=158.38.116.2 (device 72 of 76) Boks bak/NetBox Connected kan fortsatt pinges. Verken Nav 2 eller Nav 3 rapporterer switchen som nede. Har noen en forklaring ? - odd arne

1 0

AlertEngine
by morten.vold＠itea.ntnu.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Odd Arne Hauge wrote: > Jeg har en switch som er nede, dvs. management VLAN kan ikke n?s via > ping, telnet eller lignende. [...] > Verken Nav 2 eller Nav 3 rapporterer switchen som nede. > Har noen en forklaring ? Som du skrev etterp?, har v2 rapportert switchen som nede. Mitt sp?rsm?l blir da f?rst og fremst: Kj?rer pping p? v3? "nav status pping" Hvis den kj?rer, sjekk hva som st?r i loggen til ppingeren under /usr/local/nav/var/log/ - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFAyZh/XxIl0kpcOkQRAqq/AKDYPvI6sYaAmxqDaCqzGdY29JjCpgCfQhN0 2kvO3ROjam3biC6jfSbS6gA= =ACug -----END PGP SIGNATURE-----

2 2

Stop unwanted email the smart way
by Jean＠best-svc-plans.com 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040610/6e9… >From odd.hauge at hiMolde.no Fri Jun 11 14:02:57 2004 From: odd.hauge at hiMolde.no (Odd Arne Hauge) Date: Thu Jun 17 13:15:35 2004 Subject: AlertEngine Message-ID: <009001c44fa3$a77e43b0$6e01a8c0(a)molde.bravida.no> Hallo. Jeg har en switch som er nede, dvs. management VLAN kan ikke n?s via ping, telnet eller lignende. Feilmelding fra NavCron ($CRICKETDIR/cricket/collect-subtrees) sier: [11-Jun-2004 12:51:13*] No response from "158.38.116.2" [158.38.116.2].161. Snmpwalk sier: Timeout: No Response from 158.38.116.2. GetDeviceData sier: Jun 11 12:35:43 2004 getDeviceData_08 QUERY_NETBOX_T08-6-RUN Now working with(119): kristiansund-sw.hiMolde.no, type=wsc295048, ip=158.38.116.2 (device 72 of 76) Boks bak/NetBox Connected kan fortsatt pinges. Verken Nav 2 eller Nav 3 rapporterer switchen som nede. Har noen en forklaring ? - odd arne

1 0

Control those pesky junk emails the smart way
by Marshall＠best-svc-plans.com 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040610/007… >From werner at nvg.ntnu.no Thu Jun 10 11:59:10 2004 From: werner at nvg.ntnu.no (Morten Werner Olsen) Date: Thu Jun 17 13:15:35 2004 Subject: Release-notice: NAV 3.0 beta 6 In-Reply-To: <40C70146.4060308(a)itea.ntnu.no> References: <200406051354.47962.kreide(a)online.no> <20040607185254.GB20886(a)stud345.idi.ntnu.no> <40C70146.4060308(a)itea.ntnu.no> Message-ID: <20040610085909.GF1814@austin> On Wed, Jun 09, 2004 at 02:23:34PM +0200, Morten Vold wrote: > > o Det manglet noe s?nt som "crondir = ${prefix}/cron" i Makefile, > > slik at 'make install' stoppet opp. > > .. i hvilken Makefile? I den som ligger p? "root"-niv?. - Werner

1 0

Get smart spam control you can trust
by Terrance＠better-svc-plans.com 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040608/ba1… >From morten.vold at itea.ntnu.no Wed Jun 9 15:23:34 2004 From: morten.vold at itea.ntnu.no (Morten Vold) Date: Thu Jun 17 13:15:35 2004 Subject: Release-notice: NAV 3.0 beta 6 In-Reply-To: <20040607185254.GB20886(a)stud345.idi.ntnu.no> References: <200406051354.47962.kreide(a)online.no> <20040607185254.GB20886(a)stud345.idi.ntnu.no> Message-ID: <40C70146.4060308(a)itea.ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Morten Werner Olsen wrote: > Driver ? installerer beta 6 p? Debian Sarge for Uninett. Samtidig > lager jeg en slags installasjonveiledning for samme distribusjon som > jeg skal sende ut p? lista ut n?r den er ferdig.. Glimrende :) > I den forbindelse har jeg st?tt p? noen sm?problemer: > o Dere har glemt ? slette config.cache f?r dere laget tar-ball :) Vet. Dessverre har jeg glemt ? kommunisere dette videre til Kristian mens han var release-ansvarlig, s? denne feilen i Makefila er blitt f?rt videre. > o B?de /usr/local/jakarta-tomcat-5.0.16 og /usr/local/jakarta-tomcat > ser ut til ? v?re hardkodet i noen av build.xml-filene. Kanskje en > ide ? kun bruke /usr/local/jakarta-tomcat hvis det er meningen at det > skal v?re en symlink der..? Kristian, ser du p? dette asap? Er det noe du bruker ifm. auto-deployment av web-applikasjonene? > o Det manglet noe s?nt som "crondir = ${prefix}/cron" i Makefile, > slik at 'make install' stoppet opp. .. i hvilken Makefile? > Da s? det ut til at ting ble installert. Jeg kommer sikkert tilbake > til ting ifm. konfigurasjonen. Det er sikkert nok av ting ? ta tak i :) - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFAxwFFXxIl0kpcOkQRAkDqAJ9tPYSMGDcwP+sgE7KIpCr8qaXuzgCaA9RU zy2QpvFDSwraEOG0/wkLiK8= =Fpfx -----END PGP SIGNATURE-----

1 0

Vedr. vlanPlot og Network Explorer
by kreide＠online.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Port 80 m? v?re ?pent mot omverden ser det ut som. Ikke bare port 443. Jeg > kunne godt tenke meg at det var nok ? kun ?pne for 443. Vet ikke hva du > sier til det ? Ja, n? kom vlanPlot opp her ogs?. Dette skal v?re en kurrant sak, pr?v ? endre i filen: nav/lib/python/nav/web/pyproxy/vlanPlot.py P? linje 52 endrer du: VALUE="http:// til: VALUE="https:// De tre linjene under er ikke i bruk enda, s? dem trenger du ikke endre, kun den f?rste. Fungerer det da? - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAvY5MRBuET7ul/ccRAonaAJ9zWRoW/WTyxli8t5hf9q5OaQ0kswCeJiIf qQrEOR4/JsEsNBGE7ZHzkTQ= =qIpH -----END PGP SIGNATURE-----

3 6

Nav 30 Beta 6
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hallo. Det ser ut som om ting er begynt ? falle p? plass n?. Men jeg har noen sm?problemer og det er mulig dette er s?re Molde-problemer og ikke s? interessante for alle. 1. Problemer med molde-sw.himolde.no (Catalyst 4506) Litt bakgrunnsinfo. UNINETTs ruter i Molde (molde-gw.uninett.no) fungerer som en ren transitt ruter. All lokal ruting i Molde foreg?r p? molde-sw.himolde.no, som er en catalyst 4506 med en lag 3 supervisor. Mellom molde-gw og molde-sw er det to 100 mbps linknett. Mao. s? er det to default ruter definert p? molde-sw.himolde.no. Over det ene linknettet kj?res ogs? ipv6. Dessverre st?tter ikke cat4K ipv6. Det ble derfor etablert en dot1q trunk p? dette interfacet og et nytt vlan 6 for ? ta h?nd om native trafikk p? det aktuelle interfacet p? molde-sw (Gi 6/2). Konfigurasjonen p? molde-sw ser dermed slik ut: interface GigabitEthernet6/1 description p-p mot molde-gw, moldesw-moldegw no switchport ip address 158.38.0.106 255.255.255.252 ! interface GigabitEthernet6/2 description p-p mot molde-gw, moldesw-moldegw2 switchport trunk encapsulation dot1q switchport trunk native vlan 6 interface Vlan6 ip address 158.38.0.98 255.255.255.252 ip route 0.0.0.0 0.0.0.0 158.38.0.97 ip route 0.0.0.0 0.0.0.0 158.38.0.105 Interface gigabit 6/1 rapporteres ikke som routerport eller som linknett for molde-sw, men som en switchport! Hvorfor ? (I rapporten /report/swport?b1.netboxid=121). Mens p? molde-gw.uninett.no rapporteres begge fastethernet interfacene (0/0 og 0/4) i /report/prefix rapporten, dog rapporteres fastethernet 0/4 (som er koblet til gigabit 6/1 p? molde-sw) som en elink og ikke link. Fortsatt problemer med 48 10/100/1000 -tx modulen, WS-X4448-GB-RJ45. Modulen syner ikke i rapportene /report/modules og /modules?sysname=molde-sw.himolde.no. Men switchportene vises i rapporten /report/swport?b1.netboxid=121, men da som modul 1, og uten tilh?rende port. I Network Explorer vises 1/null som modul/port for alle porter tilh?rende denne modulen. Interfacene tilh?rende nevnte modul vises heller ikke i cricket. N?r vi snakker om moduler ser jeg at b?de molde-gw.uninett.no og kristiansund-gw.uninett.no har modul med modulnummer lik -1. 2. Kristiansund. Det ser ut som VLAN ikke samles inn for de 2 switchene i Kristiansund. Problemene med at alle switchporter for Catalyst 2950-48E1 ble rapportert som trunk l?ste seg ved ? legge inn en eldre versjon av SW. Nav2 rapporterer for?vrig disse switchene riktig. 3. Switch-rapportene Jeg synes det er litt dumt at switchportene for en node av type GSW ikke listes under rapportene "Core switch ports" og "Trunked core switch ports". Ellers rapporteres n? native VLAN og management VLAN som switchporter, er dette meningen ? 4. Maskin-sporing Jeg kan fortsatt ikke spore wlan-basene mine. Switchportene mot disse er satt opp som dot1q trunker med native vlan lik management vlan (dvs. ikke vlan 1). Ikke at dette er s? viktig, men det kan kanskje v?re nyttig. 5. Rapporten typesnmpoid. Gir f?lgende melding: Configuration error! The report generator is not able to do such things.ERROR: Relation "typesnmpoid" does not exist SELECT typename,oidkey,snmpoid,typesnmpoid.frequency,typeid FROM type JOIN typesnmpoid USING (typeid) JOIN snmpoid USING (snmpoidid) WHERE typeid = '46' ORDER BY typename,oidkey,snmpoid LIMIT 100 OFFSET 0 6. Cricket F?r ikke samlet inn data p? subinterface. F.eks: fastethernet0_0.1-802.1q vlan subif atm4_0.1-aal5 layer - odd arne

1 0

Release-notice: NAV 3.0 beta 6
by kreide＠online.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 beta 6 er n? tilgjengelig for nedlasting p? http://metanav.ntnu.no/downloads/v3/ . Vi har fortsatt arbeidet med ? stabilisere NAV 3.0, og beta 6 inneholder en rekke forbedringer og bugfikser. editdb-problemer i beta 5 skal v?re rettet, og vi har laget st?tte for ENTITY-MIB for ? forbedre datainnsamling. I tillegg til det som er beskrevet i preinstall.txt m? f?lgende gj?res for ? f? networkExplorer og vlanPlot opp og kj?re: 1. Hent ned og installer Tomcat 5 (eller tilsvarende). Merk at tomcat krever JDK, s? har du bare JRE installert m? en slik ogs? installeres. 2. Kopier lib/java/ConfigParser.jar og lib/java/Database.jar fra NAV inn i shared/lib i tomcat-katalogen. Dersom du ikke har lagt en PostgreSQL driver i jre/lib/ext m? ogs? en Postgre driver kopieres inn i shared/lib. 3. Kopier apache/webapps/* fra NAV inn i webapps/ i tomcat-katalogen. 4. Start tomcat. For de som installerer NAV 3 beta for f?rste gang ================================================= Som det tidligere er gjort oppmerksom p?, b?r man ha en egen boks dedikert til beta-testingen, iom. at versjon 3 ikke er klar til ? ta over for en v2-boks i produksjon. P? ovennevnte URL finnes filen preinstall.txt, som forel?pig er den eneste formen for dokumentasjon p? hva man trenger ? gjennomf?re for ? klargj?re en boks for NAV v3. Filen er en logg over hva jeg foretok meg for ? f? installert NAV v3 beta p? v?r RedHat 9-baserte boks. Universitetet i Troms? har brukt denne som et utgangspunkt for ? gj?re noe tilsvarende p? FreeBSD. Inntil vi f?r testet at ting fungerer som forventet p? Apache 2, m? webgrensesnittet kj?re p? Apache 1.3. Fordi Apache 1.3 med mod_python ikke st?tter tr?der, m? man kompilere opp en egen python-interpreter uten tr?dst?tte og med en egen bibliotek-sti og installere alle python-biblioteker dobbelt opp. Dette er dessverre tungvindt, men punktet forsvinner n?r vi f?r det til ? fungere tilfredsstillende p? Apache 2 (alle er derimot velkomne til ? pr?ve det p? Apache 2 hvis de blir lei av ? vente). For den som ?nsker ? installere p? RedHat 9, ligger det en RPM-pakke ute p? metanav. Denne er merket med noen avhengigheter, men langt i fra alle (derav filen preinstall.txt). Ellers har man muligheten for ? installere fra kildekoden, som n? ogs? ligger ute. RPM-pakke for rpm p? FreeBSD ligger der for?vrig ogs?. Etter at man har installert NAV (eller pakket ut kildekoden), finnes det en liten guide til ? komme i gang i filen doc/getting-started.txt (hvis du installerte RPM'en, ligger denne som /usr/local/nav/doc/getting-started.txt). For de som skal oppgradere fra beta 5 ===================================== Det er kun sm? endringer i databasen, s? det er ikke n?dvendig ? lage denne p? nytt. P? ovennevnte URL et sql-script (beta5-beta6.sql) for ? oppdatere manage-databasen. Dette m? kj?res f?r man starter NAV p? nytt. Til alle ======== Jeg ber om at nav-users utnyttes til det fulle blant de som n? ?nsker ? pr?ve seg frem med en beta-installasjon (og jeg h?per ogs? at UiT? og HiMolde kan v?re med ? hjelpe til litt her for nykommerne, siden dere allerede har v?rt gjennom f?rstegangs-installasjon av NAV v3). Jeg vil ogs? oppfordre den som har tid, kunnskap og lyst, til ? hjelpe oss ? rette opp feil de finner, ved ? sende inn patcher til kildekoden. Inntil vi ?pner utviklerlista til NAV, ser jeg gjerne at denslags blir sendt direkte til meg. Lykke til med installering og drift av ny beta! - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAwbSHRBuET7ul/ccRApaBAJ435mEzJ+nqPdmSUgDs2BUof+duhgCgwrPg FXsQGtO3B2oK+wmhmMa5HoI= =VoIk -----END PGP SIGNATURE-----

2 1

Vedr. vlanPlot og Network Explorer
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hallo. Jeg tror du kan ta det med ro. Fungerer fint med Safari og MAc OS X i alle fall. Tror nok problemet skyldes pc'en jeg brukte p? jobb. - odd arne -----Original Message----- From: Kristian Eide [mailto:kreide@online.no] Sent: Fri 04-Jun-04 09:32 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: Vedr. vlanPlot og Network Explorer -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >> Dersom du ?pner port 80, men bruker https n?r du ?pner vlanPlot URL'en, >> kommer da bildene opp? > Ja, det gj?r de. Jeg har sjekket, og dette skal i teorien virke. Hvilken browser/JVM testet du med? Lasting av bildene skjer asynkront, og jeg har opplevd noen ganger at dette ikke har fungert bra n?r man bruker Java-plugin. Har du mulighet til ? teste med IE (innebygd JVM)? Hvis det virker s? er det alts? et plugin-problem jeg m? se p?. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAwCWgRBuET7ul/ccRAooGAJ0SQx2xXajZnCTm+ucI9ZYjSpUXvQCfd/Sc uWmIZYgOuHmU6ZbBMtZflPI= =r1Wa -----END PGP SIGNATURE-----

1 0

Smårusk med Beta5
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hei. Har oppdaget noe sm?rusk med Beta5. Bl.a. finner ikke Nav3 denne modulen som st?r i en Catalyst 4506: 48 10/100/1000BaseTX (RJ45) WS-X4448-GB-RJ45 F?lgelig blir ingen av interfacene tilh?rende denne modulen synlig i noen rapporter. Mener at denne ble vist i forrige beta, men er absolutt ikke sikker. Nav3 klarer ikke ? avlede VLAN for to lan som g?r over en dot1q trunk mellom ruter og switch (FastEthernet0/0.1-802.1Q vLAN subif ). M? sette VLAN manuelt. /report/swreport lister heller ikke vlan for de aktuelle switchene som henger bak denne ruteren (switchtype Catalyst 2950-48 og Catalyst 3548XL). Dette til tross for at jeg kan se VLAN ved en sp?rring mot databasen: "select * from swport where moduleid=46;" Fra Network Explorer er det ikke mulig ? bla seg fra ruter til switch. Jeg f?r da ikke brkt NetWork Explorer mot de switchene som henger bak ruteren. Ser ogs? ut som Nav3 ikke liker to linknett mellom to noder. For v?r del mellom molde-gw.uninett.no og molde-sw.himolde.no. Bl.a. listes kun det ene linknettet i Network Explorer. Samt at vlanPlot blir litt "feil.." (http://apc98.himolde.no/vlanPlot/). Network Explorer takler ikke subinterface for ATM s?rlig godt. F?r kun vist selve interfacet, men ikke hva som er i andre enden (f.eks: ATM 6/0 <--> (gwport.gif) [6/0] (null, null, null) Browsing av bokser (/browse/switch-navn) virker ikke. Vet ikke om den featuren er "sluppet" enn?. H?per dette ble klart nok.... - odd arne Odd Arne Hauge H?gskolen i Molde

3 4

Vedr. vlanPlot og Network Explorer
by Borge.Brunes＠cc.uit.no 17 Jun '04

17 Jun '04

kreide(a)online.no said: > Etter litt rask debugging viser det seg at problemet var manglende > pg73jdbc3.jar. Du har installert b?de JDK og JRE p? boksen, men bare JRE'en > har pg73jdbc3.jar i sin lib/ext. Tomcat m? derimot kj?res med JDK (for at den > skal kunne kompilere JSP, selv om denne ikke brukes av NAV) som manglet > dette. Jeg mangler denne fila i det store og det hele. Hvilket programpakke kommer denne med p? linux? -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

4 3

SV: Smårusk med Beta5
by peder.sefland＠hivolda.no 17 Jun '04

17 Jun '04

>>> "Odd Arne Hauge" <odd.hauge(a)hiMolde.no> 02.06.04 12:55 >>> Hei. Har oppdaget noe sm?rusk med Beta5. Bl.a. finner ikke Nav3 denne modulen som st?r i en Catalyst 4506: 48 10/100/1000BaseTX (RJ45) WS-X4448-GB-RJ45 Vi skal til ? kj?pe en Catalyst 4510 med samme modul, s? vi h?per dette lar seg ordne. Peder Sefland

1 0

Vedr. vlanPlot og Network Explorer
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Etter ogs? ? ha kopiert Database.jar til Tomcats lib-katalog f?r jeg n? f?lgende feilmelding: Error, could not connect to database! Mangler det kanskje noe i db.conf filen ? - odd arne -----Original Message----- From: Kristian Eide [mailto:kreide@online.no] Sent: Tue 01-Jun-04 19:21 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: Vedr. vlanPlot og Network Explorer -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Dette gir f?lgende resultat: > Error, could not read config file: /usr/local/nav/etc/vPServer.conf > Og riktignok: denne filen mangler jeg. Finner den ikke i tar-ballen heller > (installerte fra rpm). Aha. Pr?v 'touch /usr/local/nav/etc/vPServer.conf' og se om det hjelper. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAvLsxRBuET7ul/ccRAkz7AKDCT5yVlXnFklb8p+Upvsa98GDzSQCbBieY 2KEO16KisUH21UvHhv9Oiw0= =Mtw1 -----END PGP SIGNATURE-----

2 1

***SPAM*** WINNING NOTIFICATION
by glorioustrust744＠telstra.com 17 Jun '04

17 Jun '04

GLORIOUS TRUST AGENCY Ref. Number: 539/356/1123 Batch Number: 841930152-YU67 REPLY TO THIS EMAIL ADDRESS: glorioustrust(a)netscape.net Sir/Madam, We are pleased to inform you of the result of the Lottery International programs held on the 28th of May 2004, your e-mail address attached to ticket number 278511465896-5603 with serial Number 3772-554-8976 drew lucky numbers 13-03-76-89 which consequently won in the 1st category, you have therefore been approved for a lump sum pay out of US$1,000,000 (One Million United States Dollars) CONGRATULATIONS!!! Due to some numbers and names, we ask that you keep your winning information confidential until you file for your claim.. This is part of our security protocol to avoid double claiming and unwarranted abuse of this program by some participants. All participants were selected through a computer ballot system drawn from over 20,000 company and 30,000,000 individual email addresses and names from all over the World. This promotional program takes place every year.This lottery was promoted and sponsored by some eminent personalities who do not wish to declare their identity for security reasons. To file for your claim, please contact our fiducial Agent: Mrs. Glory Festus and Mr. Mike David. Email: glorioustrust(a)netscape.net Remember, all winning must be filed not later than 28th of June 2004 or when authentic proof is given for the delay of filing your winning claim. Please note in order to avoid unnecessary delays and complications, remember to quote your reference number and batch numbers in all correspondence. Furthermore, should there be any change of address do inform our agent as soon as possible. Congratulations once more from our members of staff and thank you for being a Winner in our promotional program . Note: Anybody under the age of 18 is automatically disqualified. Sincerely yours, Mr. Mike David Lottery Co-ordinator. REPLY TO THIS EMAIL ADDRESS: glorioustrust(a)netscape.net ---------------- Powered by telstra.com

1 0

Vedr. vlanPlot og Network Explorer
by kreide＠online.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >Innslaget er der det. Lell f?r jeg could not connect to database. OK, takk, du kan endre pw n?, jeg fant feilen. Etter litt rask debugging viser det seg at problemet var manglende pg73jdbc3.jar. Du har installert b?de JDK og JRE p? boksen, men bare JRE'en har pg73jdbc3.jar i sin lib/ext. Tomcat m? derimot kj?res med JDK (for at den skal kunne kompilere JSP, selv om denne ikke brukes av NAV) som manglet dette. Pr?v om ikke det fungere n?. Uansett skal jeg skrive en liten guide til oppsett av Tomcat med neste beta, s? det var egentlig greit at vi kom over dette potensielle problemet. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAvQOgRBuET7ul/ccRAv08AJ9dv0nsp9B3g2x5yrkw1OdAOsBn4QCgvRG1 nugpX10uaWx3D0YTVIXlP68= =QagJ -----END PGP SIGNATURE-----

2 2

Vedr. vlanPlot og Network Explorer
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Etter ? ha kopiert ConfigParser.jar til Tomcats lib katalog f?r jeg f?lgende melding n?r jeg pr?ver Network Explorer: Mod_python error: "PythonHandler nav.web.pyproxy.proxy" Traceback (most recent call last): File "/usr/local/apache/libexec/python/lib/python2.2/site-packages/mod_python/apache.py", line 193, in Dispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/pyproxy/proxy.py", line 60, in handler req.content_type = response.msg.dict['content-type'] KeyError: content-type ? kopiere filen hadde tydeligvis ingen virkning p? vlanPlot. Ingenting logges p? nav3 serveren som jeg er i stand til ? finne. Det eneste er lokalt javakonsoll som sier: Blanker Nettel-hash Reseter group-vector URL: http://apc98.himolde.no/vPServer/servlet/vPServer?section=boks&gruppeid=0&r… Error: Operation timed out - odd arne -----Original Message----- From: owner-nav-users(a)itea.ntnu.no on behalf of Hauge Odd Arne Sent: Tue 01-Jun-04 14:20 To: Kristian Eide Cc: nav-users(a)itea.ntnu.no Subject: Re: Vedr. vlanPlot Hallo. Beklar at jeg rotet med versjon 4 av Tomcat. Har n? oppgradert, men har problemer fortsatt. Vedlagt f?lger tomcat log for network explorer. vlanPlot gir tilsynelatende ingen feilmeldinger, men det dukker ingenting opp i plot'et. - odd arne ----- Original Message ----- From: "Kristian Eide" <kreide(a)online.no> To: "Hauge Odd Arne" <odd.hauge(a)hiMolde.no> Cc: <nav-users(a)itea.ntnu.no> Sent: Tuesday, June 01, 2004 1:24 PM Subject: Re: Vedr. vlanPlot > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Feilmelding fra lokalt javakonsoll er f?lgende (se under). > > Ja, antar problemet er manglende installert Tomcat? I s? tilfellet m? Tomcat 5 > installers, de to .war filene fra apache/webapps kopieres inn i Tomcat's > webapps/ katalog og til slutt starte Tomcat (lytte p? port 8080, som er > default). > > - -- > Kristian > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.3 (GNU/Linux) > > iD8DBQFAvGdqRBuET7ul/ccRAvmeAJ4zNV+qCIetDnBYRlXzrBf56k+aHgCfYDo3 > MfedNk2WwFK/AnnFDZnWTzk= > =SrZr > -----END PGP SIGNATURE-----

2 1

Vedr. vlanPlot og Network Explorer
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

>http://apc98.himolde.no:8080/vPServer/servlet/vPServer?section=boks&gruppei… >Dersom dette fungerer skal ogs? vlanPlot og networkExplorer fungere (i >teorien). Dette gir f?lgende resultat: Error, could not read config file: /usr/local/nav/etc/vPServer.conf Og riktignok: denne filen mangler jeg. Finner den ikke i tar-ballen heller (installerte fra rpm). - odd arne - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAvLh3RBuET7ul/ccRAoJaAKC0WulKRYme/ycVuPddAZf4lf/GEwCgjqXs SotVriNRxSc86gQKhHd3dt8= =Qc7O -----END PGP SIGNATURE-----

2 1

Release-notice: NAV 3.0 beta 5
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hallo. Vedr. vlanPlot, jeg f?r ikke tegnet noe kart. N? har jo ikke jeg s? mange rutere ? skryte av men jeg burde f?tt tegnet opp 3. Linknettene oppdages av Nav3, s? det er ikke det som er problemet. - odd arne Odd Arne Hauge H?gskolen i Molde -----Original Message----- From: owner-nav-users(a)itea.ntnu.no on behalf of Kristian Eide Sent: Thu 27-May-04 20:38 To: nav-users(a)itea.ntnu.no Cc: Subject: Release-notice: NAV 3.0 beta 5 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 beta 5 er n? tilgjengelig for nedlasting p? http://metanav.ntnu.no/downloads/v3/ . Vi har fortsatt arbeidet med ? stabilisere NAV 3.0, og beta 5 inneholder en rekke forbedringer og bugfikser. Av ny funksjonalitet kan nevnes vlanPlot, som n? er ? finne i toolbox. Denne mangler fortsatt endel funksjonalitet sammenlignet med NAV 2.0 (bla. navigering nedover i nettet og last-data), men dette vil komme etterhvert.

2 1

Vedr. vlanPlot
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hallo. Feilmelding fra lokalt javakonsoll er f?lgende (se under). mvh Odd Arne Hauge H?gskolen i Molde ---------------------------------------------------- Error getting java version number, assuming 1.0.0 Henter parametere fra HTML-fil Recalc all time-fields Rolling back: -300 seconds. beginInterval: Tue Jun 01 08:52:50 CEST 2004 endInterval : Tue Jun 01 08:57:50 CEST 2004 Starter buildBynett(), gruppe 0 ------------ Blanker Nettel-hash Reseter group-vector URL: http://apc98.himolde.no/vPServer/servlet/vPServer?section=boks&gruppeid=0&r… Error: Operation timed out: connect Exception occurred during event dispatching: java.lang.NullPointerException at Net.setConfig(Net.java:831) at Net.buildBynett(Net.java:183) at Net.showBynett(Net.java:877) at Net.refreshNettel(Net.java:867) at NetComponentListener.componentResized(Listeners.java:743) at java.awt.Component.processComponentEvent(Unknown Source) at java.awt.Component.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) -----Original Message----- From: Hauge Odd Arne Sent: Mon 31-May-04 23:01 To: Kristian Eide; nav-users(a)itea.ntnu.no Cc: Subject: RE: Release-notice: NAV 3.0 beta 5 Hallo. Vedr. vlanPlot, jeg f?r ikke tegnet noe kart. N? har jo ikke jeg s? mange rutere ? skryte av men jeg burde f?tt tegnet opp 3. Linknettene oppdages av Nav3, s? det er ikke det som er problemet. - odd arne Odd Arne Hauge H?gskolen i Molde -----Original Message----- From: owner-nav-users(a)itea.ntnu.no on behalf of Kristian Eide Sent: Thu 27-May-04 20:38 To: nav-users(a)itea.ntnu.no Cc: Subject: Release-notice: NAV 3.0 beta 5 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 beta 5 er n? tilgjengelig for nedlasting p? http://metanav.ntnu.no/downloads/v3/ . Vi har fortsatt arbeidet med ? stabilisere NAV 3.0, og beta 5 inneholder en rekke forbedringer og bugfikser. Av ny funksjonalitet kan nevnes vlanPlot, som n? er ? finne i toolbox. Denne mangler fortsatt endel funksjonalitet sammenlignet med NAV 2.0 (bla. navigering nedover i nettet og last-data), men dette vil komme etterhvert.

2 2

The only smart way to control spam
by Monique＠all-prods.com 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040529/4f8… >From Terrence at all-prods.com Sat May 29 23:27:23 2004 From: Terrence at all-prods.com (Terrence) Date: Thu Jun 17 13:15:32 2004 Subject: Stop unwanted email the smart way Message-ID: <27715868742.88923934455271958709(a)all-prods.com> An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040529/128… >From odd.hauge at hiMolde.no Sun May 30 20:03:34 2004 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Jun 17 13:15:32 2004 Subject: ProgrammingError: ERROR: emotd: permission denied Message-ID: <634E424FC73E384DBC0A30A776022C1C018166A2(a)rokke.admin.himolde.no> Hallo. Etter oppgradering til beta5 kommer jeg inn p? Nav via web (/index.py/index). F?r meldingen: ProgrammingError: ERROR: emotd: permission denied select emotd.emotdid, title, description, last_changed, author, type, publish_start, publish_end, affected, downtime, count(value) as units from emotd left outer join emotd_related using (emotdid) where publish_end > now() and publish_start < now() group by emotd.emotdid, title, description, last_changed, author, type, publish_start, publish_end, affected, downtime order by last_changed desc, publish_end desc limit 20 offset 0 - odd arne Odd Arne Hauge H?gskolen i Molde

1 0

Release-notice: NAV 3.0 beta 5
by kreide＠online.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 beta 5 er n? tilgjengelig for nedlasting p? http://metanav.ntnu.no/downloads/v3/ . Vi har fortsatt arbeidet med ? stabilisere NAV 3.0, og beta 5 inneholder en rekke forbedringer og bugfikser. Av ny funksjonalitet kan nevnes vlanPlot, som n? er ? finne i toolbox. Denne mangler fortsatt endel funksjonalitet sammenlignet med NAV 2.0 (bla. navigering nedover i nettet og last-data), men dette vil komme etterhvert. Jeg vil ogs? nevne at da Morten Vold, som normalt er release-ansvarlig for NAV, er bortreist p? ferie denne uken, og jeg gj?r derfor release i hans frav?r. For de som installerer NAV 3 beta for f?rste gang ================================================= Som det tidligere er gjort oppmerksom p?, b?r man ha en egen boks dedikert til beta-testingen, iom. at versjon 3 ikke er klar til ? ta over for en v2-boks i produksjon. P? ovennevnte URL finnes filen preinstall.txt, som forel?pig er den eneste formen for dokumentasjon p? hva man trenger ? gjennomf?re for ? klargj?re en boks for NAV v3. Filen er en logg over hva jeg foretok meg for ? f? installert NAV v3 beta p? v?r RedHat 9-baserte boks. Universitetet i Troms? har brukt denne som et utgangspunkt for ? gj?re noe tilsvarende p? FreeBSD. Inntil vi f?r testet at ting fungerer som forventet p? Apache 2, m? webgrensesnittet kj?re p? Apache 1.3. Fordi Apache 1.3 med mod_python ikke st?tter tr?der, m? man kompilere opp en egen python-interpreter uten tr?dst?tte og med en egen bibliotek-sti og installere alle python-biblioteker dobbelt opp. Dette er dessverre tungvindt, men punktet forsvinner n?r vi f?r det til ? fungere tilfredsstillende p? Apache 2 (alle er derimot velkomne til ? pr?ve det p? Apache 2 hvis de blir lei av ? vente). For den som ?nsker ? installere p? RedHat 9, ligger det en RPM-pakke ute p? metanav. Denne er merket med noen avhengigheter, men langt i fra alle (derav filen preinstall.txt). Ellers har man muligheten for ? installere fra kildekoden, som n? ogs? ligger ute. RPM-pakke for rpm p? FreeBSD ligger der for?vrig ogs?. Etter at man har installert NAV (eller pakket ut kildekoden), finnes det en liten guide til ? komme i gang i filen doc/getting-started.txt (hvis du installerte RPM'en, ligger denne som /usr/local/nav/doc/getting-started.txt). For de som skal oppgradere fra beta 4 ===================================== Pga. en rekke forbedringer i datainnsamling, anbefales det at man like gjerne oppretter manage-databasen p? nytt. Stopp NAV og Apache, logg p? PostgreSQL som brukeren postgres og skriv "DROP DATABASE manage;". Etter at du har installert den nye versjonen, f?lger du samme oppskrift som i starten for ? opprette manage p? nytt (ligger under doc/sql/README). Dette inkluderer ? kj?re inn snmpoid.sql p? nytt. I tillegg ligger det p? ovennevnte URL et sql-script for ? oppdatere navprofiles-databasen. Dette b?r ogs? kj?res f?r man starter NAV p? nytt. Til alle ======== Jeg ber om at nav-users utnyttes til det fulle blant de som n? ?nsker ? pr?ve seg frem med en beta-installasjon (og jeg h?per ogs? at UiT? og HiMolde kan v?re med ? hjelpe til litt her for nykommerne, siden dere allerede har v?rt gjennom f?rstegangs-installasjon av NAV v3). Jeg vil ogs? oppfordre den som har tid, kunnskap og lyst, til ? hjelpe oss ? rette opp feil de finner, ved ? sende inn patcher til kildekoden. Inntil vi ?pner utviklerlista til NAV, ser jeg gjerne at denslags blir sendt direkte til meg. Lykke til med installering og drift av ny beta! - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAtjWJRBuET7ul/ccRAjq9AJ0TMDBdM80ZvRKW6G+PbGKhRgUnAQCdHuLp w6pOHGytLZC7RzkVjVaDZhw= =aHW2 -----END PGP SIGNATURE-----

2 6

Problemer med å hente ut serienr. vha. snmp
by Borge.Brunes＠cc.uit.no 17 Jun '04

17 Jun '04

N?r man skal legge til ny boks s? kreves det serienummer som skal, i st?rst mulig grad, hentes automatisk. Det automagiske skjer ikke, og man er n?dt til ? legge inn serienummer manuelt :-( Spesielt kjedelig er det n?r man ?nsker ? "bulke" boksene inn. Er dette et kjent problem, el. er det bare jeg/FreeBSD som har det? B?rge Brunes UiT?

2 1

Innsamling av data fra switcher
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hei. Jeg f?r f?lgende resultater: manage=> select count(*) from vlan; count ------- 24 (1 row) manage=> select count(*) from prefix; count ------- 24 (1 row) /report/prefix ser helt fin ut. Savner ingenting der. - odd arne Odd Arne Hauge H?gskolen i Molde -----Original Message----- From: Gro-Anita H. Vindheim [mailto:gro-anita.vindheim@itea.ntnu.no] Sent: Mon 24-May-04 08:44 To: Hauge Odd Arne; Kristian Eide Cc: nav-users(a)itea.ntnu.no Subject: Re: Innsamling av data fra switcher Kristian - vi har det samme problemet p? hauk n?. Det gjelder ikke bare 3524 (som vel er likest Odd Arne sine bokser), men ogs? hp2524 etc. /report/swport henter sin vlaninformasjon fra vlan.vlan - ikke swport.vlan. Kan det ha blitt noe feil i fylling av denne? Fra hauk: manage=> select count(*) from vlan; count ------- 11 (1 row) manage=> select count(*) from prefix; count ------- 12 (1 row) Odd Arne - hvordan er det med fylling av prefix-tabellen hos deg? Se f.eks /report/prefix Gro-Anita On Saturday 22 May 2004 11:19, Hauge Odd Arne wrote: > -----Original Message----- > From: Kristian Eide [mailto:kreide@online.no] > Sent: Sat 22-May-04 02:00 > To: Hauge Odd Arne > Cc: nav-users(a)itea.ntnu.no > Subject: Re: Innsamling av data fra switcher > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Etter oppgraderingen til beta4 finner ikke Nav 'VLAN' og 'Netbox > > connected' for de switchtypene hvor jeg m?tte registrere type selv. > > Eksempel p? slike typer er: Catalyst 3512, 3548, 2948, 2980, 2980ga, > > 2950-48. > > > > Hva refererer du til med 'VLAN' og 'Netbox connected'? Er dette > > rapporter? > > Ja, VLAN og Netbox connect vises ikke i /report/swport. > > > Kommer dette av at det er egendefinerte typer ? > > > >Det kan tenkes og at ?rsaken er at ikke disse har kommet riktig inn i > > OID databasen. N? har jeg skrevet om OID databasen for ? gj?re dette > > mer robust og dette vil komme med i beta5. > > > >Det du kan gj?re n? er ? sette uptodate=f for de relevante typen og > > restarte getDeviceData. > > Er fors?kt mange ganger uten at det tilsynelatende hjelper. Men jeg > lurer p? om rapportene kan v?re feil. Feks. gir f?lgende sql-sp?rringer > disse resultatene: > > select count(*) from swport where vlan > 0; > count > ------- > 1258 > (1 row) > > og select count(*) from swport where to_netboxid > 0; > count > ------- > 19 > (1 row) > > select count(*) from swport where vlan=10; > count > ------- > 109 > (1 row) > > Mens et avansert s?k p? switcheporter (/report/swport?adv=1 med vlan > lik 10) gir et resultat p? 4 porter. > > Jeg vet ikke om dette tyder p? noen kodefeil, men det virker p? meg som > det finnes informasjon i databasen som ikke presenteres riktig i > rapportene. Alt tyder (s? langt jeg kan bed?mme det) p? at > innsamlingsscriptene fungerer som de skal. > > Det er ogs? litt "forvirrende" at switchportene for GSW -typer ikke > vises i rapporten "Core switch ports (expand trunks to vlan) ". > > - odd arne -- --- Gro-Anita Vindheim NTNU, ITEA, NETT Gro-Anita.Vindheim(a)itea.ntnu.no

1 0

When spam is overwhelming and what to do about it...
by Edna＠asst-helper.biz 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040523/b74… >From gro-anita.vindheim at itea.ntnu.no Mon May 24 09:44:41 2004 From: gro-anita.vindheim at itea.ntnu.no (Gro-Anita H. Vindheim) Date: Thu Jun 17 13:15:32 2004 Subject: Innsamling av data fra switcher In-Reply-To: <634E424FC73E384DBC0A30A776022C1C01816692(a)rokke.admin.himolde.no> References: <634E424FC73E384DBC0A30A776022C1C01816692(a)rokke.admin.himolde.no> Message-ID: <200405240844.41828.gro-anita.vindheim(a)itea.ntnu.no> Kristian - vi har det samme problemet p? hauk n?. Det gjelder ikke bare 3524 (som vel er likest Odd Arne sine bokser), men ogs? hp2524 etc. /report/swport henter sin vlaninformasjon fra vlan.vlan - ikke swport.vlan. Kan det ha blitt noe feil i fylling av denne? Fra hauk: manage=> select count(*) from vlan; count ------- 11 (1 row) manage=> select count(*) from prefix; count ------- 12 (1 row) Odd Arne - hvordan er det med fylling av prefix-tabellen hos deg? Se f.eks /report/prefix Gro-Anita On Saturday 22 May 2004 11:19, Hauge Odd Arne wrote: > -----Original Message----- > From: Kristian Eide [mailto:kreide@online.no] > Sent: Sat 22-May-04 02:00 > To: Hauge Odd Arne > Cc: nav-users(a)itea.ntnu.no > Subject: Re: Innsamling av data fra switcher > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Etter oppgraderingen til beta4 finner ikke Nav 'VLAN' og 'Netbox > > connected' for de switchtypene hvor jeg m?tte registrere type selv. > > Eksempel p? slike typer er: Catalyst 3512, 3548, 2948, 2980, 2980ga, > > 2950-48. > > > > Hva refererer du til med 'VLAN' og 'Netbox connected'? Er dette > > rapporter? > > Ja, VLAN og Netbox connect vises ikke i /report/swport. > > > Kommer dette av at det er egendefinerte typer ? > > > >Det kan tenkes og at ?rsaken er at ikke disse har kommet riktig inn i > > OID databasen. N? har jeg skrevet om OID databasen for ? gj?re dette > > mer robust og dette vil komme med i beta5. > > > >Det du kan gj?re n? er ? sette uptodate=f for de relevante typen og > > restarte getDeviceData. > > Er fors?kt mange ganger uten at det tilsynelatende hjelper. Men jeg > lurer p? om rapportene kan v?re feil. Feks. gir f?lgende sql-sp?rringer > disse resultatene: > > select count(*) from swport where vlan > 0; > count > ------- > 1258 > (1 row) > > og select count(*) from swport where to_netboxid > 0; > count > ------- > 19 > (1 row) > > select count(*) from swport where vlan=10; > count > ------- > 109 > (1 row) > > Mens et avansert s?k p? switcheporter (/report/swport?adv=1 med vlan > lik 10) gir et resultat p? 4 porter. > > Jeg vet ikke om dette tyder p? noen kodefeil, men det virker p? meg som > det finnes informasjon i databasen som ikke presenteres riktig i > rapportene. Alt tyder (s? langt jeg kan bed?mme det) p? at > innsamlingsscriptene fungerer som de skal. > > Det er ogs? litt "forvirrende" at switchportene for GSW -typer ikke > vises i rapporten "Core switch ports (expand trunks to vlan) ". > > - odd arne -- --- Gro-Anita Vindheim NTNU, ITEA, NETT Gro-Anita.Vindheim(a)itea.ntnu.no

1 0

Finally... Secret breakthrough ends email virus problem
by Damon＠better-svc-plans.com 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040530/a12…

1 0

RE: Problemer med å få lagt inn nye bokser
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hei. Dette m? fikses snarest. Slik det er n? er editdb ubrukelig for manuell registrering av bokser. Alt lar seg desverre ikke registrere via bulk. Siden dere tydeligvis vet hvor hunden er begravet dukker det vel opp en fiks rett etter pinse slik at vi f?r lagt inn alle boksene igjen. - odd arne -----Original Message----- From: owner-nav-users(a)itea.ntnu.no on behalf of Kristian Eide Sent: Sat 29-May-04 11:26 To: Borge Brunes Cc: nav-users(a)itea.ntnu.no Subject: Re: Problemer med ? f? lagt inn nye bokser -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > ProgrammingError: ERROR: column type.uptodate does not exist Ja, i beta 5 er dette feltet er flyttet til netbox-tabellen. > Kan nevne at jeg f?r lagt inn bokser vha. bulk, men det hentes ingen data > fra boksene (sw-port, moduler osv.) Kan du sende meg de siste 5000 linjene fra getDeviceData.log? Ved test lokalt her ved NTNU kom n? data fint inn uten restart av gDD, men det kan ta noe tid da OID testeren m? gj?re seg ferdig f?rst. > Fors?kte med tips fra beta4 "UPDATE type SET uptodate='f';" men fikk > feilmeldingen: > ERROR: column "uptodate" of relation "type" does not exist Du m? erstatte 'type' med 'netbox' fra beta 5, men dette skal egentlig ikke v?re n?dvendig n?. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAuFdZRBuET7ul/ccRAm23AJ9M/0dQAi1oQtvYAJxr4OmZzb4GNACePgEz Smoa399l5LlMnljdEPZiEQw= =/MWD -----END PGP SIGNATURE-----

1 0

Problemer med å få lagt inn nye bokser
by Borge.Brunes＠cc.uit.no 17 Jun '04

17 Jun '04

[kj?rer beta5.] Dersom jeg fors?ker ? legge inn en enkelt boks (ikke bulk som fungerer fint, nesten) s? f?r jeg f?lgende feilmelding: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): [snip] ProgrammingError: ERROR: column type.uptodate does not exist SELECT type.typeid, type.sysobjectid, type.vendorid, type.descr, type.uptodate, type.typename, type.frequency, type.cs_at_vlan, type.cdp, type.tftp FROM type WHERE (type.typeid=14) Kan nevne at jeg f?r lagt inn bokser vha. bulk, men det hentes ingen data fra boksene (sw-port, moduler osv.) Fors?kte med tips fra beta4 "UPDATE type SET uptodate='f';" men fikk feilmeldingen: ERROR: column "uptodate" of relation "type" does not exist B?rge Brunes UiT?

2 1

When spam is overwhelming and what to do about it...
by Gordon＠asst-helper.biz 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040522/c53… >From stain at itea.ntnu.no Mon May 24 03:30:51 2004 From: stain at itea.ntnu.no (Stian =?iso-8859-1?Q?S=F8iland?=) Date: Thu Jun 17 13:15:32 2004 Subject: SV: =?iso-8859-1?Q?sp=F8rsm=E5?= =?iso-8859-1?Q?l?= til nav3 installasjon In-Reply-To: <s0ae2996.060(a)HVO-3.hivolda.no> References: <s0ae2996.060(a)HVO-3.hivolda.no> Message-ID: <20040524003051.GA17565(a)itea.ntnu.no> On 2004-05-21 16:08:44, Peder Magne Sefland wrote: > File "/usr/local/nav/lib/python/nav/startstop.py", line 221, in load > if self.content[0][:2] == '# ': del self.content[0] > IndexError: list index out of range > [root@nav3 root]# Dette er en bug ifra v?r side som du nok er den f?rste til ? merke. Vi sjekker crontaben for brukeren navcron, men ignorerer linjer ?verst i filen. Problemet er sannsynligvis her at crontaben er blank, slik at f?rste linje mangler. En kvikk fiks vil derfor v?re ? kj?re crontab -u navcron -e og legge til en blank linje eller en linje som begynner med # kommentar > Jeg pr?vde ogs? ? redigere Makefile og legge til LIBS="-lm -lutil men da ble det slik > > make LIBS="-lm -lutil /usr/src/redhat/BUILD/Python-2.2.2/libpython2.2.a" OPT=-DEAPI Hmm.. det ble ganske f?l feilmelding. Jeg m? innr?mme at jeg ikke har sett dette problemet f?r, og klarer ikke umiddelbart ? si hva du m? gj?re for ? fikse dette.. har du pr?vd ? bruke en RPM istedet? -- Stian S?iland Der ble jeg sittende og svette. Jeg ITEA systemdrift, NTNU hadde gjort en skikkelig handling. Dette orakel(a)ntnu.no var ikke tull. Det var ikke TV2. [Loe] Tlf: 735 91500 =/\=

1 0

ProgrammingError: ERROR: emotd: permission denied
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Er fikset. Manglet plpgsql. - odd arne -----Original Message----- From: owner-nav-users(a)itea.ntnu.no on behalf of Hauge Odd Arne Sent: Sun 30-May-04 19:03 To: Kristian Eide; nav-users(a)itea.ntnu.no Cc: Subject: ProgrammingError: ERROR: emotd: permission denied Hallo. Etter oppgradering til beta5 kommer jeg inn p? Nav via web (/index.py/index). F?r meldingen: ProgrammingError: ERROR: emotd: permission denied select emotd.emotdid, title, description, last_changed, author, type, publish_start, publish_end, affected, downtime, count(value) as units from emotd left outer join emotd_related using (emotdid) where publish_end > now() and publish_start < now() group by emotd.emotdid, title, description, last_changed, author, type, publish_start, publish_end, affected, downtime order by last_changed desc, publish_end desc limit 20 offset 0 - odd arne Odd Arne Hauge H?gskolen i Molde

1 0

RE: Nav3 Beta 4 ser ikke ut til å virke
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Du hadde helt rett igjen. En omstart av getDeviceData ser gjorde susen. Da er det meste p? plass igjen. Takk for hjelpen. - odd arne -----Original Message----- From: Kristian Eide [mailto:kreide@online.no] Sent: Thu 20-May-04 23:57 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: Nav3 Beta 4 ser ikke ut til ? virke -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Da er enkelte ting begynt ? dukke opp i NAV. Men f?lgende typer er ikke > "oppdaget" av beta-4: Catalyst 4506 (Sup III) > Catalyst 4000-serie (2948, 2980, 2980g) > Catalyst 2950, Disse fungerer greit p? NTNU-nettet, s? de b?r komme inn. Det kan imidlertid ta opptil en time, men ved ? restarte getDeviceData vil disse komme inn med en gang. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFArSnjRBuET7ul/ccRAqiWAJ0Q1PThVHcs4s4KVivvtKF7UK+tXQCfV3LC il7j5QnfBvR90UiAo3Q2n1c= =LgBy -----END PGP SIGNATURE-----

1 0

Smart spam control ends junk mail problem
by Clare＠asst-helper.biz 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040517/73c… >From morten.vold at itea.ntnu.no Tue May 18 13:47:23 2004 From: morten.vold at itea.ntnu.no (Morten Vold) Date: Thu Jun 17 13:15:31 2004 Subject: SV: =?ISO-8859-1?Q?sp=F8rsm=E5l_til_nav3_installasjon?= In-Reply-To: <4147C56944E2B64D978FA0EAB10A14FA4B06FD(a)fagserver2.fag.hin.no> References: <4147C56944E2B64D978FA0EAB10A14FA4B06FD(a)fagserver2.fag.hin.no> Message-ID: <40A9E9BB.8050709(a)itea.ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Forselv Ketil wrote: > fortsatte ? fikle litt med httpd.conf. Fant ikke den > morten_httpd.conf-fila som det refereres til i preinstall.txt. Ah, ikke alt er helt oppdatert i preinstall.txt ser det ut til nei. Eksempelkonfigurasjonen finner du i tarballen, under doc/apache/ . > Etter en reboot, skjer f?lgende: > > [root@Nav3 root]# /usr/local/nav/bin/nav start > Traceback (most recent call last): > File "/usr/local/nav/bin/nav", line 54, in ? > from nav.startstop import * > ImportError: No module named nav.startstop > Kj?rer en ny install av rpm-fila, nytter ikke. Dette skyldes at Python ikke vet hvor den skal finne NAV-bibliotekene. Beklageligvis ser det ut til at scriptet du skal ha lagt inn i /etc/profile.d/ ikke blir kj?rt n?r man logger inn som root. Dette scriptet skal nemlig ta seg av ? sette opp milj?variabler riktig for en typisk NAV-installasjon. Forel?pig kan du source inn denne helt eksplisitt i root sin ~/.bashrc - s? b?r du v?re sikker p? at det blir satt riktig. Innholdet i dette scriptet kunne sikkert med fordel v?rt plassert et sted tidlig i boot-prosessen p? tjenermaskina, slik at milj?variablene var satt system-wide. > Tar og pakker ut tarballen, og n?r jeg skal pr?ve ? f? den til skjer > f?lgende n?r jeg kj?rer make: Kj?rte du ./configure f?rst? Hva sa den? Problemet her er nemlig at du ikke har Ant installert (denne mangler i lista over ting som st?r i INSTALL-fila - denne mangler en god del informasjon fremdeles). Uansett er du nok bedre tjent med ? bruke RPM-pakken (og da trenger du heller ikke ? ha Ant installert). - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFAqem6XxIl0kpcOkQRAsg6AKCLWy3/T3uyABiKUqePEvcLoGlghgCcCQpK 8HK1IHxWSOs0o/d7ZGi1akE= =MaSg -----END PGP SIGNATURE-----

1 0

FW: Maskinsporing av AP
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

-----Original Message----- From: Hauge Odd Arne Sent: Mon 03-May-04 20:43 To: nav-beta(a)itea.ntnu.no Cc: Subject: Maskinsporing av AP Hallo. HSM har en del AP (cisco 1200 m/ IOS). Maskinsporing ser ikke ut til ? fungere for disse, til tross for at jeg kan finne b?de ip og mac i hhv. arp og cam tabellene. Som mange andre kj?rer vi flere VLAN over en trunk ut mot AP'ene. Kan det v?re dette som gj?r at sporingen ikke virker ? Maskinsporing av de samme AP'ene virker fint i Nav2. - odd arne hauge

1 0

spørsmål til nav3 installasjon
by morten.vold＠itea.ntnu.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Peder Magne Sefland wrote: > Jeg har begynt ? installere nav3 og har kommet et stykke p? vei. :-) > Slik jeg forst?r det kj?rer vi nav-3.0_beta4-1.noarch.rpm n?r alt > under preinstall.txt er gjort. Det er riktig. > Hvordan er det med rekkef?lgen p? disse manuelle installasjonene? > SNMP_Session er nevt f?rst i nedlastingslista, men sist i hvordan > sette opp. Listen over ting som skal lastes ned er i mer eller mindre tilfeldig rekkef?lge. De st?r der stort sett til info om hva det heter og hvor man finner det. > N?r det gjelder oppsette av postgresql. Skal jeg opprette katalog > strukturen under /usr/local/nav p? samme m?te som nav2.1.5? Du trenger ikke opprette noen katalogstruktur her - denne f?lger med i RPM-pakken. Katalogstrukturen har for?vrig forandret seg fra NAV v2. Dersom du ?nsker ? legge noe her selv (vi har for eksempel lagt data-clusteret til PostgreSQL under /usr/local/nav/var/pgsql, fremfor defaulten som er et annet sted), kan du gj?re det, men det er alts? ikke n?dvendig. For?vrig tilkommer det et par punkter p? preinstall.txt etterhvert som jeg f?r ut fingern, men ingenting som gj?r at du ikke kan installere rpm-pakken. - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFApIyEXxIl0kpcOkQRApxlAKCV/7m9gjn8qWRVZgxDdLARXPWtgQCeKVsv mFjMB5Ir92cJHKkOvupWWPs= =1w2B -----END PGP SIGNATURE-----

1 0

Is spam out of control in your inbox?
by Ramon＠top-svcs.biz 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040512/bc0… >From peder.sefland at hivolda.no Fri May 14 11:59:17 2004 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Thu Jun 17 13:15:31 2004 Subject: =?ISO-8859-1?Q?sp=F8rsm=E5l=20til=20nav3=20installasjon?= Message-ID: <s0a4a69c.086(a)HVO-3.hivolda.no> Jeg har begynt ? installere nav3 og har kommet et stykke p? vei. Jeg har installert alle pakkene under apt-get avsnittet i preinstall.txt og lastet ned alle programmene for manuell installasjon. Slik jeg forst?r det kj?rer vi nav-3.0_beta4-1.noarch.rpm n?r alt under preinstall.txt er gjort. Hvordan er det med rekkef?lgen p? disse manuelle installasjonene? SNMP_Session er nevt f?rst i nedlastingslista, men sist i hvordan sette opp. N?r det gjelder oppsette av postgresql. Skal jeg opprette katalog strukturen under /usr/local/nav p? samme m?te som nav2.1.5? Peder Sefland

1 0

Innsamling av data fra switcher
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

-----Original Message----- From: Kristian Eide [mailto:kreide@online.no] Sent: Sat 22-May-04 02:00 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: Innsamling av data fra switcher -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Etter oppgraderingen til beta4 finner ikke Nav 'VLAN' og 'Netbox connected' > for de switchtypene hvor jeg m?tte registrere type selv. Eksempel p? slike > typer er: Catalyst 3512, 3548, 2948, 2980, 2980ga, 2950-48. > Hva refererer du til med 'VLAN' og 'Netbox connected'? Er dette rapporter? Ja, VLAN og Netbox connect vises ikke i /report/swport. > Kommer dette av at det er egendefinerte typer ? >Det kan tenkes og at ?rsaken er at ikke disse har kommet riktig inn i OID >databasen. N? har jeg skrevet om OID databasen for ? gj?re dette mer robust >og dette vil komme med i beta5. >Det du kan gj?re n? er ? sette uptodate=f for de relevante typen og restarte >getDeviceData. Er fors?kt mange ganger uten at det tilsynelatende hjelper. Men jeg lurer p? om rapportene kan v?re feil. Feks. gir f?lgende sql-sp?rringer disse resultatene: select count(*) from swport where vlan > 0; count ------- 1258 (1 row) og select count(*) from swport where to_netboxid > 0; count ------- 19 (1 row) select count(*) from swport where vlan=10; count ------- 109 (1 row) Mens et avansert s?k p? switcheporter (/report/swport?adv=1 med vlan lik 10) gir et resultat p? 4 porter. Jeg vet ikke om dette tyder p? noen kodefeil, men det virker p? meg som det finnes informasjon i databasen som ikke presenteres riktig i rapportene. Alt tyder (s? langt jeg kan bed?mme det) p? at innsamlingsscriptene fungerer som de skal. Det er ogs? litt "forvirrende" at switchportene for GSW -typer ikke vises i rapporten "Core switch ports (expand trunks to vlan) ". - odd arne

1 0

Innsamling av data fra switcher
by kreide＠online.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Etter oppgraderingen til beta4 finner ikke Nav 'VLAN' og 'Netbox connected' > for de switchtypene hvor jeg m?tte registrere type selv. Eksempel p? slike > typer er: Catalyst 3512, 3548, 2948, 2980, 2980ga, 2950-48. Hva refererer du til med 'VLAN' og 'Netbox connected'? Er dette rapporter? > Kommer dette av at det er egendefinerte typer ? Det kan tenkes og at ?rsaken er at ikke disse har kommet riktig inn i OID databasen. N? har jeg skrevet om OID databasen for ? gj?re dette mer robust og dette vil komme med i beta5. Det du kan gj?re n? er ? sette uptodate=f for de relevante typen og restarte getDeviceData. > deviceBrowser virker heller ikke. f?r meldingen: > module' object has no attribute 'process' HTTP/1.1 404 Not Found. Denne h?per jeg noen andre svarer deg p?. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFArpgpRBuET7ul/ccRAtBPAKCN5YvZ+rZyRBOkbq5NK6d79Q+PqwCgno1u 9MxIQh5KaOJYUn28TRcQH+c= =tq5t -----END PGP SIGNATURE-----

1 0

Control those pesky junk emails the smart way
by Donovan＠top-svcs.biz 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040521/0eb… >From odd.hauge at hiMolde.no Fri May 21 23:39:21 2004 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Jun 17 13:15:31 2004 Subject: Innsamling av data fra switcher Message-ID: <634E424FC73E384DBC0A30A776022C1C01816691(a)rokke.admin.himolde.no> Hallo. Etter oppgraderingen til beta4 finner ikke Nav 'VLAN' og 'Netbox connected' for de switchtypene hvor jeg m?tte registrere type selv. Eksempel p? slike typer er: Catalyst 3512, 3548, 2948, 2980, 2980ga, 2950-48. Kommer dette av at det er egendefinerte typer ? Nav finner forresten heller ikke Netbox connected for Catalyst 3524 XL. deviceBrowser virker heller ikke. f?r meldingen: module' object has no attribute 'process' HTTP/1.1 404 Not Found. - odd arne Odd Arne Hauge H?gskolen i Molde

1 0

Re: SV: spørsmål til nav3 installasjon
by peder.sefland＠hivolda.no 17 Jun '04

17 Jun '04

Jeg hadde ogs? dette problemet, som er nevnt under >>> kef(a)it.hin.no 18.05.2004 22:01:08 >>> > >> Etter en reboot, skjer f?lgende: >> >> [root@Nav3 root]# /usr/local/nav/bin/nav start >> Traceback (most recent call last): >> File "/usr/local/nav/bin/nav", line 54, in ? >> from nav.startstop import * >> ImportError: No module named nav.startstop > Dette skyldes at Python ikke vet hvor den skal finne NAV-bibliotekene. > Beklageligvis ser det ut til at scriptet du skal ha lagt inn i > /etc/profile.d/ ikke blir kj?rt n?r man logger inn som root. Dette > scriptet skal nemlig ta seg av ? sette opp milj?variabler riktig for en > typisk NAV-installasjon. Forel?pig kan du source inn denne helt > eksplisitt i root sin ~/.bashrc - s? b?r du v?re sikker p? at det blir > satt riktig. N?r jeg startet p? nytt etter at jeg la inn milj?variablene, fikk jeg disse feilmeldingene [root@nav3 root]# /usr/local/nav/bin/nav start no crontab for navcron Traceback (most recent call last): File "/usr/local/nav/bin/nav", line 57, in ? services = ServiceRegistry() File "/usr/local/nav/lib/python/nav/startstop.py", line 335, in __init__ serviceList.extend(serviceType.loadServices()) File "/usr/local/nav/lib/python/nav/startstop.py", line 154, in loadServices serviceList = [cls(f) for f in fileList] File "/usr/local/nav/lib/python/nav/startstop.py", line 136, in __init__ CronService.crontab = Crontab(CronService.cronUser) File "/usr/local/nav/lib/python/nav/startstop.py", line 211, in __init__ self.load() File "/usr/local/nav/lib/python/nav/startstop.py", line 221, in load if self.content[0][:2] == '# ': del self.content[0] IndexError: list index out of range [root@nav3 root]# Jeg antar at det er noe tull med mod_python. Jeg fant kun mod_python-2.7.10, men h?per det g?r greitt. Jeg pr?vde ogs? ? redigere Makefile og legge til LIBS="-lm -lutil men da ble det slik make LIBS="-lm -lutil /usr/src/redhat/BUILD/Python-2.2.2/libpython2.2.a" OPT=-DEAPI make[1]: Entering directory `/root/nav3filer/mod_python-2.7.10/src' gcc -DEAPI -I/root/nav3filer/mod_python-2.7.10/src/include -I/usr/include/httpd -I/usr/src/redhat/BUILD/Python-2.2.2 -I/usr/src/redhat/BUILD/Python-2.2.2/Include -c -o mod_python.o mod_python.c In file included from mod_python.c:54: /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:93: parse error before '*' token /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:93: warning: data definition has no type or storage class /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:96: parse error before "python_module" /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:96: warning: data definition has no type or storage class In file included from /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:99, from mod_python.c:54: /root/nav3filer/mod_python-2.7.10/src/include/util.h:57: parse error before '*' token In file included from /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:100, from mod_python.c:54: /root/nav3filer/mod_python-2.7.10/src/include/tableobject.h:69: parse error before "table" /root/nav3filer/mod_python-2.7.10/src/include/tableobject.h:69: warning: no semicolon at end of struct or union /root/nav3filer/mod_python-2.7.10/src/include/tableobject.h:70: warning: data definition has no type or storage class /root/nav3filer/mod_python-2.7.10/src/include/tableobject.h:71: parse error before '}' token /root/nav3filer/mod_python-2.7.10/src/include/tableobject.h:71: warning: data definition has no type or storage class /root/nav3filer/mod_python-2.7.10/src/include/tableobject.h:77: parse error before '*' token In file included from mod_python.c:54: /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:139: parse error before "table" /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:139: warning: no semicolon at end of struct or union /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:140: warning: data definition has no type or storage class /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:141: parse error before '*' token /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:141: warning: data definition has no type or storage class /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:142: parse error before '}' token /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:142: warning: data definition has no type or storage class mod_python.c:61: parse error before '*' token mod_python.c:61: warning: data definition has no type or storage class mod_python.c:63: parse error before '*' token mod_python.c:63: warning: data definition has no type or storage class mod_python.c: In function `make_interpreter': mod_python.c:83: warning: passing arg 4 of `ap_log_error' makes integer from pointer without a cast mod_python.c:83: warning: passing arg 5 of `ap_log_error' from incompatible pointer type mod_python.c:83: too few arguments to function `ap_log_error' mod_python.c: In function `python_cleanup': mod_python.c:173: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:173: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:173: too few arguments to function `ap_log_rerror' mod_python.c:176: warning: passing arg 4 of `ap_log_error' makes integer from pointer without a cast mod_python.c:176: warning: passing arg 5 of `ap_log_error' from incompatible pointer type mod_python.c:176: too few arguments to function `ap_log_error' mod_python.c:214: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:214: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:217: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:217: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:222: warning: passing arg 4 of `ap_log_error' makes integer from pointer without a cast mod_python.c:222: warning: passing arg 5 of `ap_log_error' from incompatible pointer type mod_python.c:225: warning: passing arg 4 of `ap_log_error' makes integer from pointer without a cast mod_python.c:225: warning: passing arg 5 of `ap_log_error' from incompatible pointer type mod_python.c: At top level: mod_python.c:258: parse error before "pool" mod_python.c: In function `python_init': mod_python.c:265: invalid operands to binary * mod_python.c:268: warning: passing arg 1 of `ap_add_version_component' from incompatible pointer type mod_python.c:268: too few arguments to function `ap_add_version_component' mod_python.c:272: warning: passing arg 1 of `ap_add_version_component' from incompatible pointer type mod_python.c:272: too few arguments to function `ap_add_version_component' mod_python.c:292: `s' undeclared (first use in this function) mod_python.c:292: (Each undeclared identifier is reported only once mod_python.c:292: for each function it appears in.) mod_python.c:293: warning: passing arg 5 of `ap_log_error' from incompatible pointer type mod_python.c:293: too few arguments to function `ap_log_error' mod_python.c: At top level: mod_python.c:313: parse error before '*' token mod_python.c: In function `python_create_dir_config': mod_python.c:316: `conf' undeclared (first use in this function) mod_python.c:317: parse error before ')' token mod_python.c:321: `dir' undeclared (first use in this function) mod_python.c:322: `p' undeclared (first use in this function) mod_python.c: At top level: mod_python.c:339: parse error before '*' token mod_python.c: In function `mp_copy_table': mod_python.c:342: `array_header' undeclared (first use in this function) mod_python.c:342: `ah' undeclared (first use in this function) mod_python.c:343: `table_entry' undeclared (first use in this function) mod_python.c:343: `elts' undeclared (first use in this function) mod_python.c:346: `t2' undeclared (first use in this function) mod_python.c:347: parse error before ')' token mod_python.c:352: `t1' undeclared (first use in this function) mod_python.c: At top level: mod_python.c:360: parse error before '*' token mod_python.c: In function `python_merge_dir_config': mod_python.c:363: `merged_conf' undeclared (first use in this function) mod_python.c:363: parse error before ')' token mod_python.c:364: `current_conf' undeclared (first use in this function) mod_python.c:364: parse error before ')' token mod_python.c:365: `new_conf' undeclared (first use in this function) mod_python.c:365: parse error before ')' token mod_python.c:372: `p' undeclared (first use in this function) mod_python.c: In function `python_directive': mod_python.c:415: `conf' undeclared (first use in this function) mod_python.c:418: parse error before ')' token mod_python.c:429: warning: assignment makes pointer from integer without a cast mod_python.c:431: warning: assignment makes pointer from integer without a cast mod_python.c: In function `get_request_object': mod_python.c:502: request for member `module_index' in something not a structure or union mod_python.c:536: request for member `module_index' in something not a structure or union mod_python.c: In function `python_handler': mod_python.c:554: `conf' undeclared (first use in this function) mod_python.c:560: parse error before ')' token mod_python.c:560: request for member `module_index' in something not a structure or union mod_python.c:574: warning: assignment makes pointer from integer without a cast mod_python.c:579: warning: assignment makes pointer from integer without a cast mod_python.c:581: warning: passing arg 1 of `ap_is_directory' from incompatible pointer type mod_python.c:581: too few arguments to function `ap_is_directory' mod_python.c:584: warning: passing arg 2 of `ap_make_dirstr_parent' makes pointer from integer without a cast mod_python.c:604: warning: assignment makes pointer from integer without a cast mod_python.c:608: warning: assignment makes pointer from integer without a cast mod_python.c:612: warning: initialization makes pointer from integer without a cast mod_python.c:613: warning: assignment makes pointer from integer without a cast mod_python.c:642: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:642: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:642: too few arguments to function `ap_log_rerror' mod_python.c:661: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:661: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:661: too few arguments to function `ap_log_rerror' mod_python.c:688: warning: assignment makes pointer from integer without a cast mod_python.c:690: warning: assignment makes pointer from integer without a cast mod_python.c:692: warning: assignment makes pointer from integer without a cast mod_python.c:695: warning: assignment makes pointer from integer without a cast mod_python.c:697: warning: assignment makes pointer from integer without a cast mod_python.c:699: warning: assignment makes pointer from integer without a cast mod_python.c:702: warning: assignment makes pointer from integer without a cast mod_python.c:704: warning: assignment makes pointer from integer without a cast mod_python.c:730: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:730: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:730: too few arguments to function `ap_log_rerror' mod_python.c:738: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:738: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:738: too few arguments to function `ap_log_rerror' mod_python.c: In function `python_cleanup_handler': mod_python.c:816: `conf' undeclared (first use in this function) mod_python.c:821: parse error before ')' token mod_python.c:821: request for member `module_index' in something not a structure or union mod_python.c:832: warning: assignment makes pointer from integer without a cast mod_python.c:837: warning: assignment makes pointer from integer without a cast mod_python.c:839: warning: passing arg 1 of `ap_is_directory' from incompatible pointer type mod_python.c:839: too few arguments to function `ap_is_directory' mod_python.c:843: warning: passing arg 2 of `ap_make_dirstr_parent' makes pointer from integer without a cast mod_python.c:860: warning: assignment makes pointer from integer without a cast mod_python.c:888: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:888: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:888: too few arguments to function `ap_log_rerror' mod_python.c:907: warning: passing arg 4 of `ap_log_rerror' makes integer from pointer without a cast mod_python.c:907: warning: passing arg 5 of `ap_log_rerror' from incompatible pointer type mod_python.c:907: too few arguments to function `ap_log_rerror' mod_python.c:933: warning: assignment makes pointer from integer without a cast mod_python.c:935: warning: assignment makes pointer from integer without a cast mod_python.c:937: warning: assignment makes pointer from integer without a cast mod_python.c:940: warning: assignment makes pointer from integer without a cast mod_python.c:943: warning: assignment makes pointer from integer without a cast mod_python.c: In function `directive_PythonImport': mod_python.c:990: `conf' undeclared (first use in this function) mod_python.c:994: parse error before ')' token mod_python.c:1002: warning: assignment makes pointer from integer without a cast mod_python.c:1015: warning: assignment makes pointer from integer without a cast mod_python.c: In function `directive_PythonInterpPerDirective': mod_python.c:1092: `conf' undeclared (first use in this function) mod_python.c:1095: parse error before ')' token mod_python.c: In function `directive_PythonInterpPerDirectory': mod_python.c:1125: `conf' undeclared (first use in this function) mod_python.c:1128: parse error before ')' token mod_python.c: In function `directive_PythonOption': mod_python.c:1187: `conf' undeclared (first use in this function) mod_python.c:1189: parse error before ')' token mod_python.c: At top level: mod_python.c:1311: parse error before "pool" mod_python.c: In function `PythonChildInitHandler': mod_python.c:1314: `array_header' undeclared (first use in this function) mod_python.c:1314: `ah' undeclared (first use in this function) mod_python.c:1315: `table_entry' undeclared (first use in this function) mod_python.c:1315: `elts' undeclared (first use in this function) mod_python.c:1327: `p' undeclared (first use in this function) mod_python.c:1327: `ap_null_cleanup' undeclared (first use in this function) mod_python.c:1341: parse error before ')' token mod_python.c:1354: `s' undeclared (first use in this function) mod_python.c:1362: warning: passing arg 5 of `ap_log_error' from incompatible pointer type mod_python.c:1362: too few arguments to function `ap_log_error' mod_python.c:1379: warning: passing arg 5 of `ap_log_error' from incompatible pointer type mod_python.c:1379: too few arguments to function `ap_log_error' mod_python.c:1412: warning: passing arg 5 of `ap_log_error' from incompatible pointer type mod_python.c: In function `PythonPostReadRequestHandler': mod_python.c:1459: `ap_null_cleanup' undeclared (first use in this function) mod_python.c: At top level: mod_python.c:1478: parse error before "python_handlers" mod_python.c:1480: warning: braces around scalar initializer mod_python.c:1480: warning: (near initialization for `python_handlers[0]') mod_python.c:1480: warning: initialization makes integer from pointer without a cast mod_python.c:1480: warning: excess elements in scalar initializer mod_python.c:1480: warning: (near initialization for `python_handlers[0]') mod_python.c:1481: warning: braces around scalar initializer mod_python.c:1481: warning: (near initialization for `python_handlers[1]') mod_python.c:1481: warning: initialization makes integer from pointer without a cast mod_python.c:1482: warning: data definition has no type or storage class mod_python.c:1683: conflicting types for `python_module' /root/nav3filer/mod_python-2.7.10/src/include/mod_python.h:96: previous declaration of `python_module' mod_python.c:1685: `this_module_needs_to_be_ported_to_apache_2_0' undeclared here (not in a function) mod_python.c:1685: initializer element is not constant mod_python.c:1685: (near initialization for `python_module.version') mod_python.c:1686: warning: initialization makes integer from pointer without a cast mod_python.c:1687: warning: initialization makes integer from pointer without a cast mod_python.c:1688: warning: initialization from incompatible pointer type mod_python.c:1691: warning: initialization makes integer from pointer without a cast mod_python.c:1692: warning: initialization from incompatible pointer type mod_python.c:1693: warning: initialization from incompatible pointer type mod_python.c:1694: warning: initialization from incompatible pointer type mod_python.c:1695: warning: initialization from incompatible pointer type mod_python.c:1696: warning: initialization from incompatible pointer type mod_python.c:1697: warning: initialization from incompatible pointer type mod_python.c:1698: warning: initialization from incompatible pointer type mod_python.c:1699: warning: excess elements in struct initializer mod_python.c:1699: warning: (near initialization for `python_module') mod_python.c:1700: warning: excess elements in struct initializer mod_python.c:1700: warning: (near initialization for `python_module') mod_python.c:1701: warning: excess elements in struct initializer mod_python.c:1701: warning: (near initialization for `python_module') mod_python.c:1702: warning: excess elements in struct initializer mod_python.c:1702: warning: (near initialization for `python_module') mod_python.c:1704: warning: excess elements in struct initializer mod_python.c:1704: warning: (near initialization for `python_module') make[1]: *** [mod_python.o] Error 1 make[1]: Leaving directory `/root/nav3filer/mod_python-2.7.10/src' make: *** [do_dso] Error 2 Peder Sefland

1 0

RE: Nav3 Beta 4 ser ikke ut til å virke
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hallo. Da er enkelte ting begynt ? dukke opp i NAV. Men f?lgende typer er ikke "oppdaget" av beta-4: Catalyst 4506 (Sup III) Catalyst 4000-serie (2948, 2980, 2980g) Catalyst 2950, Det som er "oppdaget" av mitt utstyr er: Cisco 7206 rutere, riktignok med modulnr lik -1.. Et sp?rsm?l i den forbindelse: Skal linkene for rutermoduler peke til swport. Feks: https://apc98.himolde.no/report/swport?b1.sysname=molde-gw.uninett.no&m1.mo… I tillegg er mine gamle 35xx XL switcher oppdaget. Hvis jeg ikke husker feil var det "problem" med de samme switchtypene som nevnt ?verst i tidligere beta'er ogs?, s? l?sningen er vel like rundt hj?rnet ;) - odd arne -----Original Message----- From: Kristian Eide [mailto:kreide@online.no] Sent: Thu 20-May-04 21:06 To: Hauge Odd Arne Cc: nav-users(a)itea.ntnu.no Subject: Re: Nav3 Beta 4 ser ikke ut til ? virke -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Log-filen f?lger vedlagt. Det virker som problemet er at snmpoid-tabellen ikke inneholder de data den skal. Hvis du gj?r f?lgende: SELECT COUNT(*) FROM snmpoid; Da skal du f? som svar noe slikt som 136. F?r du et tall mye mindre enn dette? Det du gj?r da er ? kj?re (i psql klienten): \i <path til snmpoid.sql> S? tar du p? nytt: UPDATE type SET uptodate='f'; Da skal ting begynne ? virke igjen etter en liten stund. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFArQG1RBuET7ul/ccRAuHiAJ9XornueOTcuAIG/+8pUTmr6PdwtACgqvmI bpkjvVE1e3gs9evICs7NVBI= =ynF0 -----END PGP SIGNATURE-----

2 1

Nav3 Beta 4 ser ikke ut til å virke
by kreide＠online.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > Log-filen f?lger vedlagt. Det virker som problemet er at snmpoid-tabellen ikke inneholder de data den skal. Hvis du gj?r f?lgende: SELECT COUNT(*) FROM snmpoid; Da skal du f? som svar noe slikt som 136. F?r du et tall mye mindre enn dette? Det du gj?r da er ? kj?re (i psql klienten): \i <path til snmpoid.sql> S? tar du p? nytt: UPDATE type SET uptodate='f'; Da skal ting begynne ? virke igjen etter en liten stund. - -- Kristian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFArQG1RBuET7ul/ccRAuHiAJ9XornueOTcuAIG/+8pUTmr6PdwtACgqvmI bpkjvVE1e3gs9evICs7NVBI= =ynF0 -----END PGP SIGNATURE-----

1 0

SV: spørsmål til nav3 installasjon
by Ketil.Forselv＠hin.no 17 Jun '04

17 Jun '04

Hei Har begynt og f? til en installasjon av NAV 3, og fulgt oppskrifta i preinstall.txt. Kj?rt nav-3.0_beta4-1.noarch.rpm, og fikk start p? nav, og fortsatte ? fikle litt med httpd.conf. Fant ikke den morten_httpd.conf-fila som det refereres til i preinstall.txt. Etter en reboot, skjer f?lgende: [root@Nav3 root]# /usr/local/nav/bin/nav start Traceback (most recent call last): File "/usr/local/nav/bin/nav", line 54, in ? from nav.startstop import * ImportError: No module named nav.startstop Kj?rer en ny install av rpm-fila, nytter ikke. Tar og pakker ut tarballen, og n?r jeg skal pr?ve ? f? den til skjer f?lgende n?r jeg kj?rer make: [root@Nav3 nav-3.0_beta4]# make make[1]: Entering directory `/root/navinst/nav-3.0_beta4/src' Building Logger ... (cd Logger && /usr/bin/ant ) && touch Logger /bin/sh: line 1: /usr/bin/ant: Ingen slik fil eller filkatalog make[1]: *** [Logger] Error 127 make[1]: Leaving directory `/root/navinst/nav-3.0_beta4/src' make: *** [all] Error 1 Andre som har hatt samme problemet? mvh Ketil -----Opprinnelig melding----- Fra: owner-nav-users(a)itea.ntnu.no [mailto:owner-nav-users@itea.ntnu.no] P? vegne av Morten Vold Sendt: 14. mai 2004 11:08 Til: Peder Magne Sefland Kopi: nav-users(a)itea.ntnu.no Emne: Re: sp?rsm?l til nav3 installasjon -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Peder Magne Sefland wrote: > Jeg har begynt ? installere nav3 og har kommet et stykke p? vei. :-) > Slik jeg forst?r det kj?rer vi nav-3.0_beta4-1.noarch.rpm n?r alt > under preinstall.txt er gjort. Det er riktig. > Hvordan er det med rekkef?lgen p? disse manuelle installasjonene? > SNMP_Session er nevt f?rst i nedlastingslista, men sist i hvordan > sette opp. Listen over ting som skal lastes ned er i mer eller mindre tilfeldig rekkef?lge. De st?r der stort sett til info om hva det heter og hvor man finner det. > N?r det gjelder oppsette av postgresql. Skal jeg opprette katalog > strukturen under /usr/local/nav p? samme m?te som nav2.1.5? Du trenger ikke opprette noen katalogstruktur her - denne f?lger med i RPM-pakken. Katalogstrukturen har for?vrig forandret seg fra NAV v2. Dersom du ?nsker ? legge noe her selv (vi har for eksempel lagt data-clusteret til PostgreSQL under /usr/local/nav/var/pgsql, fremfor defaulten som er et annet sted), kan du gj?re det, men det er alts? ikke n?dvendig. For?vrig tilkommer det et par punkter p? preinstall.txt etterhvert som jeg f?r ut fingern, men ingenting som gj?r at du ikke kan installere rpm-pakken. - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFApIyEXxIl0kpcOkQRApxlAKCV/7m9gjn8qWRVZgxDdLARXPWtgQCeKVsv mFjMB5Ir92cJHKkOvupWWPs= =1w2B -----END PGP SIGNATURE-----

1 0

RE: Nav3 Beta 4 ser ikke ut til å virke
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

> Det er jo en grunn til at dette er en beta, og ikke en produksjons-release ;) He he ! > Log fra getDeviceData sier lignende for alle rutere og svitsjer (wlan ogs?): > May 18 22:27:08 2004 getDeviceData_02 ServerPlugin-6-canHandleDevice > We cannot serve kristiansund-gw.uninett.no >Dette m? inn i listen over errata for beta4: >Det kan se ut som en bug i editdb gj?r at getDeviceData ikke f?r beskjed >om ? oppdatere hvilke OID-er de forskjellige device-typene svarer p?. >Hvis du bruker psql p? kommandolinja og logger inn i manage-databasen >som navwrite-brukeren, kan du skrive f?lgende SQL-setning for ? pr?ve ? >rette opp i det (dette gjelder _alle_ som har installert beta4!): >UPDATE type SET uptodate='f'; >Dette gjorde vi hos oss for ? l?se problemet. Ser ikke ut til ? gj?re susen hos meg. Fortsatt ingenting i Nav. Andre r?d mottas med takk. networkDiscovery logger ingen feil lenger. Men finner heller ingen ting. more /usr/local/nav/var/log/networkDiscovery/networkDiscovery.html <html> <head><title>Vlan discovery report</title></head> <body> Generated on: <b>Wed May 19 17:38:01 CEST 2004</b><br> <pre> </pre> <br><b>Report:</b> (found 0 records)<br> New count: <b>0</b>, Update count: <b>0</b> Dup count: <b>0</b>, Rem count: <b>0</b> Unused count: <b>0</b>, Rename vlan c ount: <b>0</b><br> <h2>Allowed, but non-active VLANs:</h2> <h4>(<i><b>Note</b>: VLANs 1 and 1000-1005 are for interswitch control traffic and are always allowed</i>)</h4> A total of <b>0</b> / <b>0</b> trunks have allowed VLANs that are not active.<br> May 19 17:38:01 2004 null EVENTQ-6-POST_EVENT Posted event from getDeviceData to eventEngine (notification) on eventq All done.<br> </body> </html> Kan noen hjelpe ? - odd arne

2 1

Nav3 Beta 4 ser ikke ut til å virke
by odd.hauge＠hiMolde.no 17 Jun '04

17 Jun '04

Hallo. Etter oppgradering til Beta4 av Nav3 er ingenting logget i Nav i det hele tatt. Ingen switchporter, prefix, vlan, arp, cam osv. Dette er jo litt krise.... B?de navread og navwrite brukeren eksisterer fortsatt, s? det er ikke det som er problemet. Log fra getDeviceData sier lignende for alle rutere og svitsjer (wlan ogs?): May 18 22:27:08 2004 getDeviceData_02 ServerPlugin-6-canHandleDevice We cannot serve kristiansund-gw.uninett.no Eller klager getDeviceData over at filen watchMacs.conf ikke finnes. Hvordan er syntaksen p? denne (som nav2 ?) getBoksMac.log sier f?lgende: May 18 22:12:43 2004 getBoksData_12 QUERY_NETBOX-6-GET_OID OID is missing for oidkey: cdpNeighbour NetWorkDiscovery log sier Database.openConnection(): Error, user is null Database.openConnection(): Error, pw is null Hva er galt ? - odd arne

2 1

Control those pesky junk emails the smart way
by Jamie＠email-tower.com 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040419/88a… >From Vidar.Faltinsen at uninett.no Wed Apr 21 22:25:32 2004 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Thu Jun 17 13:15:30 2004 Subject: NAV 3.0, datoer og =?ISO-8859-1?Q?release-l=F8p?= In-Reply-To: <408399FB.60002(a)itea.ntnu.no> Message-ID: <Pine.LNX.4.44.0404212119070.7258-100000(a)valentin.uninett.no> On Mon, 19 Apr 2004, Morten Vold wrote: > S? over til litt mer gledelige nyheter. Tirsdag i forrige uke ble det > besluttet at de deler av NAV som NTNU eier opphavsretten til skal gj?res > tilgjengelig under GPL (http://www.gnu.org/licenses/gpl.html). Samtidig > venter vi p? en formell beslutning fra Uninett sin side p? hva som skjer > med de to komponentene Uninett eier opphavsretten til (alertProfiles og > alertEngine). Dersom Uninett kommer fram til samme valg av lisens, vil > dette bety at hele NAV blir tilgjengelig som fri programvare under GPL. > > H?pet er at dette skal f?re til et bedre NAV for alle, der alle har > mulighet for ? bidra. Man ?nsker seg ogs? en avtale med Uninett om > fortsatt sponsing av NTNU-drevet utvikling av NAV, p? vegne av > UH-sektoren (i den grad UH-sektoren ikke selv kan bidra med kode til NAV). > > Jeg har enda ikke f?tt tilbakemelding p? n?r denne saken skal opp til > behandling i Uninetts ledergruppe, men det prioriteres forh?pentligvis, > slik at vi kan f? en rask avklaring p? det hele. UNINETT st?tter NTNUs GPL-l?p. Det er n? forankret i ledergruppen. S? da kj?rer vi p?. Vi g?r en spennende tid i m?te med stabilisering av NAV v3 og dertil "utrulling". Jeg har god tro p? at dette blir til nytte for sv?rt mange UNINETT medlemmer! Jeg/Morten vil for?vrig presentere/demonstrere NAV v3 p? UNINETT- konferansen i Harstad. Innen da har en god del av dere ogs? testet, eller st?r i l?ypa til ? gj?re det. mvh - Vidar

1 0

How to control your inbox the smart way...
by Lyman＠online-pmktg.com 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040414/85e… >From Darcy at pmktg-online.com Thu Apr 15 12:32:06 2004 From: Darcy at pmktg-online.com (Darcy) Date: Thu Jun 17 13:15:30 2004 Subject: News: smart spam and virus control is here Message-ID: <7947649347.2954078908578030926(a)pmktg-online.com> An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040415/ec2… >From Valeria_Hogan at 123india.com Sun Apr 4 11:25:16 2004 From: Valeria_Hogan at 123india.com (Javier Mcgill) Date: Thu Jun 17 13:15:30 2004 Subject: Lowest prices guaranteed for Windows, Adobe, Corel and MCafee academical and OEM software photolytic Message-ID: <BVMDLQJTFAVSHABKMRSA(a)cyberjunkie.com> An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040404/f7b… >From morten.vold at itea.ntnu.no Mon Apr 19 12:20:59 2004 From: morten.vold at itea.ntnu.no (Morten Vold) Date: Thu Jun 17 13:15:30 2004 Subject: NAV 3.0, datoer og =?ISO-8859-1?Q?release-l=F8p?= In-Reply-To: <Pine.GSO.4.33.0404190839410.29507-100000(a)alf.uib.no> References: <Pine.GSO.4.33.0404190839410.29507-100000(a)alf.uib.no> Message-ID: <408399FB.60002(a)itea.ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Roar Pettersen wrote: > Lurer litt p? hvordan det g?r med beta testingen ? Her er jeg svar skyldig, og det blir som f?lger: Vi har p? NTNU jobbet med lisenspolitikk for NAV (grunnet mangel p? s?dan), og i den forbindelse oppdaget vi like f?r p?ske at vi har gjort oss skyldig i brudd p? opphavsrett ved ? distribuere beta-utgaven av NAV v3 til HiMolde og UiT?. Dette fordi NAV v3 er avhengig av minst to funksjonsbiblioteker som er lisensiert under GNU General Public License. Derfor har vi stoppet all distribusjon av NAV v3 inntil lisenspolitikk er endelig avklart og problemet blir l?st. Det vil med andre ord si at heller ikke UiT? eller HiMolde vil f? tilgang til nyere betaversjon enn den de har i dag f?r dette er avklart. S? over til litt mer gledelige nyheter. Tirsdag i forrige uke ble det besluttet at de deler av NAV som NTNU eier opphavsretten til skal gj?res tilgjengelig under GPL (http://www.gnu.org/licenses/gpl.html). Samtidig venter vi p? en formell beslutning fra Uninett sin side p? hva som skjer med de to komponentene Uninett eier opphavsretten til (alertProfiles og alertEngine). Dersom Uninett kommer fram til samme valg av lisens, vil dette bety at hele NAV blir tilgjengelig som fri programvare under GPL. H?pet er at dette skal f?re til et bedre NAV for alle, der alle har mulighet for ? bidra. Man ?nsker seg ogs? en avtale med Uninett om fortsatt sponsing av NTNU-drevet utvikling av NAV, p? vegne av UH-sektoren (i den grad UH-sektoren ikke selv kan bidra med kode til NAV). Jeg har enda ikke f?tt tilbakemelding p? n?r denne saken skal opp til behandling i Uninetts ledergruppe, men det prioriteres forh?pentligvis, slik at vi kan f? en rask avklaring p? det hele. - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFAg5n6XxIl0kpcOkQRAn21AJwND93MIO6jpn2T5zYuv9tMqKUhFQCfbPb6 eXnoaU/bY2vuOWPbX67PV3c= =xPiu -----END PGP SIGNATURE-----

1 0

NAV 3.0, datoer og release-løp
by morten.vold＠itea.ntnu.no 17 Jun '04

17 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hei alle sammen! Det jobbes for tiden hardt med ? ferdigstille versjon 3.0 av NAV. Dessverre er det nok en del som ikke er 100% p? plass enda, slik at vi fremdeles ikke f?ler oss komfortable med ? slippe en offisiell 3.0-versjon. Derfor har vi i f?rste omgang besluttet ? flytte releasedato til "medio juni m?ned". N? er det slik at vi har hatt HiMolde og UiT? som betatestere i mars m?ned, og det har fungert bra. Vi ?nsker derfor ? ?pne for ? slippe inn flere betatestere like over p?ske, slik at de ivrigste kan f? pr?vd seg p? det vi har s? langt. Avhengig av hvor stor interessen er, kommer vi til ? slippe inn betatestere i puljer, slik at distribusjonen skjer gradvis. Litt informasjon for de som evt. ?nsker ? ta del i en betatest: - - Vi mangler forel?pig en strategi for ? ta vare p? data fra NAV v2 ved en oppgradering. Vi er litt usikre p? hvilke data som er aktuelle ? ta vare p?, men de vi har pekt ut er cam/arp for maskinsporing og rrd-data. Det er s?pass mye som er endret i v3, blant annet i databaseskjema, slik at det er ikke uten videre mulig ? bare beholde disse dataene slik de er. Et resultat av dette er at den som vil betateste, m? v?re forberedt p? ? kj?re opp en egen tjenermaskin for form?let. Det anbefales ikke ? la en NAV v3 beta-installasjon ta over for en NAV v2-tjener i produksjon. - - Installasjon av v3 krever mer av den som installerer. Vi har g?tt bort fra det automagiske systemet som installerer NAV med alle prerekvisitter, da dette var et mareritt ? vedlikeholde, og det l? mye arbeid i ? f? det til ? fungere for flere plattformer. Vi har isteden dokumentert bedre hva og hvordan man m? installere for ? f? i gang NAV. Pr. i dag sender vi ut NAV 3.0_beta som en RPM-pakke for RedHat 9 og FreeBSD. For f?rstnevnte distribusjon er pakken allerede merket med en del avhengigheter til andre pakker som f?lger med RedHat 9, og for den som bruker f.eks. apt for RedHat, vil dette s?rge for at disse avhengighetene blir installert f?rst. - - Vi har tilgode ? teste NAV 3 med Apache 2, men dette kommer. De fleste distribusjoner kommer med Apache 2 i dag, og RedHat har s? vidt jeg vet intet alternativt for Apache 1.3, slik at man m? installere dette p? egenh?nd. Grunnet NAVs n?v?rende krav om Apache 1.3 og mod_python, blir installasjonen relativt komplisert, fordi mod_python under Apache 1.3 krever en egen installasjon av Python uten tr?dst?tte (dvs. at man m? ha _to_ Python-installasjoner p? tjeneren, noe som fort kan bli tungvindt ? vedlikeholde). Sp?rsm?l og kommentarer bes rettet tilbake til denne mailinglisten. For konkrete henvendelser om ? delta i betatesting ber vi om at du sender dette til nav(a)itea.ntnu.no. - -- Morten Vold NTNU ITEA Nettgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFAZ+psXxIl0kpcOkQRAmUEAJ9lh/yu1eDmi0OWGp1305BffHTORgCg4T+X bE6WDJ7tuTtGuaMAnQQtknk= =1drN -----END PGP SIGNATURE-----

1 0

CPU-tall i NAV
by k.o.olsen＠usit.uio.no 17 Jun '04

17 Jun '04

Jobber litt med odde devicer og NAV. I dette tilfelle Cisco PIX. For enkle form?l s? st?tter PIX interface-mib ( http://ftp.eenet.ee/doc/cisco-snmp/oid/RFC1213-MIB.oid ) og cisco-process-mib ( http://ftp.eenet.ee/doc/cisco-snmp/oid/CISCO-PROCESS-MIB.oid ). Er det noen av "typene" i NAV som bruker disse MIBene ??? Eller sagt p? en annen m?te: Er det dokumentert noe sted hvilke MIBer/OIDer som benyttes av de forskjellige typene??? Takknemlig for all input! Jeg har fors?kt cgw, cgw-nomem og ogw uten hell... --Kjetil PS: Dersom output fra SNMPwalk er ?nsket, s? si fra!

2 3

SV: 109% av ip-adressene er i bruk
by peder.sefland＠hivolda.no 17 Jun '04

17 Jun '04

Er l?sningen ? rydde/slette i nav-databasen? Jeg har gjort noen sp?rringer mot databasen (viser et utdrag) SELECT DISTINCT ip, mac, arpid, fra FROM arp WHERE prefiksid = '8'; ip | mac | arpid | fra ----------------+--------------+-------+------------------------------- 158.38.150.1 | 00b0c26f1000 | 330 | 2003-11-11 16:00:03.910076+01 158.38.150.1 | 00b0c26f1000 | 1721 | 2003-11-17 09:30:12.308776+01 158.38.150.1 | 00b0c26f1000 | 11883 | 2003-12-05 14:30:03.718478+01 158.38.150.1 | 00b0c26f1000 | 12803 | 2003-12-05 16:30:03.921492+01 158.38.150.1 | 00b0c26f1000 | 68369 | 2004-04-08 19:00:03.140198+02 158.38.150.9 | 00065b3c7f18 | 331 | 2003-11-11 16:00:03.918764+01 158.38.150.9 | 00065b3c7f18 | 1722 | 2003-11-17 09:30:12.339665+01 158.38.150.9 | 00065b3c7f18 | 11884 | 2003-12-05 14:30:03.725401+01 158.38.150.9 | 00065b3c7f18 | 12804 | 2003-12-05 16:30:03.927393+01 158.38.150.9 | 00065b3c7f18 | 68370 | 2004-04-08 19:00:03.147591+02 158.38.150.10 | 009027b206bd | 3888 | 2003-11-20 08:30:02.408237+01 158.38.150.10 | 009027b206bd | 9185 | 2003-12-01 15:00:03.091978+01 158.38.150.10 | 009027b206bd | 9692 | 2003-12-02 12:00:02.89145+01 158.38.150.10 | 009027b206bd | 11885 | 2003-12-05 14:30:03.735383+01 Vil sletting av innslag som begynner med 2003--- i fra-feltet hjelpe p? problemet mitt? Evt. noen andre forslag? Peder Sefland >>> "Peder Magne Sefland" <peder.sefland(a)hivolda.no> 13.04.2004 20:46:23 >>> Vi har brukt denne funksjonen med ? f?lge med p? forbruk av ip-adresser p? nett med dhcp. Dette har vert veldig nyttig, men n?r jeg skulle sjekke i dag var vi over 100% 158.38.150.0/23 (556/510/109%) Har noen vert borte i dette f?r? Peder Sefland

1 0

Control those pesky junk emails the smart way
by Beulah＠all-prods.com 17 Jun '04

17 Jun '04

An HTML attachment was scrubbed... URL: http://desperados.itea.ntnu.no/pipermail/nav-users/attachments/20040501/47c… >From peder.sefland at hivolda.no Tue May 4 11:09:58 2004 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Thu Jun 17 13:15:30 2004 Subject: =?ISO-8859-1?Q?Er=20det=20feil=20i=20historikken=20i=20IP/mac=20?= =?ISO-8859-1?Q?-s=F8k=20i=20NAV=3F?= Message-ID: <s0976c04.080(a)HVO-3.hivolda.no> Jeg tok en s?k p? ip-addressen nemnt under. Som vi ser kommer det opp en knytting mellom ip og mac-addresse og tidspunkt. N?r jeg s? tar ? klikke p? mac-addressen f?r jeg opp porten addressen er knytt til, MEN tidsrommene stemmer ikke overens med det som kom opp f?rst. Hilsen Peder Sefland S?k p? IP/mac 158.38.86.85 00:a0:24:4a:9d:XX 2004-05-01 02:30:04+02 2004-05-01 07:00:04+02 MAC: 00a0244a9dXX S?k i cam-tabellen: 00:a0:24:4a:9d:XX volda-heltne-D-sw1 Fa0:11 2004-05-01 02:33:04+02 2004-05-01 02:48:43+02 00:a0:24:4a:9d:XX volda-heltne-D-sw1 Fa0:11 2004-05-01 10:48:04+02 2004-05-01 13:33:32+02

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users