- Nav-users - lister.unit.no

Installation of NAV on CentOS 4.4
by kaa＠msu.net 19 Okt '06

19 Okt '06

Hi, Tor Pretorius wrote: > Hello, > > I try to install Nav-3.1-0-1 on CentOS-4.4 and get a error > > rpm -ivh nav-3.1.0-1.noarch.rpm > error: Failed dependencies: > perl(Pg) is needed by nav-3.1.0-1.noarch This is known issue. Just add --nodep. This rpm works in the way described at http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 > > > I have install pgsql_perl5-1.9.0 > > > > Mvh > Tor Pretorius > ITAS -- With best regards, Alexander Krapivin mailto:kaa@msu.net NOC MSUNET ICQ UIN:3967345 MSU, Moscow, Russia

1 0

Cisco port numbering, suggestions?
by morten.brekkevold＠uninett.no 12 Okt '06

12 Okt '06

Greetings everyone, This post may become rather lengthy, but if you are interested in Cisco module issues and port numbering vs. interface names, please bear with me. I would really appreciate some feedback from our users, as the changes we are implementing will affect everyone. Removing the "submodule hack" ----------------------------- This summer I worked on fixing some of the problems with module detection on Cisco equipment. There were several problems related to the fact that gDD attempts to map Cisco's submodule paradigm in to NAV's data model by assigning module number 10 to submodule 1/0, number 11 to submodule 1/1 and so forth. Apparently, there isn't much equipment that actually employs submodules, and oftentimes these modules will not be self-sustainable devices, as in the case of the 3750 Metro. The basic metro reports two submodules, the first (1/0) contains 24 Fa ports and two Gi ports, while the second (1/1) contains two Gi ports. Basically, the Metro is just one physical device, and with the code changes I've made, the Metro will appear in NAV as one single module with 28 ports. Meaning that submodules are largely ignored by NAV, which now attaches the ports of all submodules to the top module itself. Port numbering -------------- As you may know, NAV assigns port numbers to switch interfaces. I'm told this is an old convention stemming from the old CatOS CLI implementation, where interfaces only had port numbers and not names. In many parts of the user interface, NAV refers to switch interfaces only by their module and assigned port numbers. In the Cisco case, NAV assigns (or rather, used to assign) port numbers by interpreting interface names and/or descriptions. This means that Fa1/5 would become port 5 on module 1, and Fa2/0/3 would become port 3 on module 20 (!). On devices with both Fa and Gi interfaces, Cisco reuses these numbers. A module would have both an Fa1/1 and a Gi1/1 interface. NAV would assign the port number 1 to the Fa1/1 interface, and when it found the Gi1/1 interface, it would see a port numbering conflict and assign the ifindex value of the Gi1/1 interface as its port number (typically resulting in something like 10101 as its port number). With the submodule changes described above, the code will rely more on the the portIfIndex table from the CISCO-STACK-MIB [1]. This table enumerates the interfaces of a Cisco stack into modules and port numbers. For a Metro 3750, this table will actually enumerate all 28 interfaces as port 1 through 28 on module 1. I've received some criticism for this from people running NAV from the latest trunk revisions, though. Apparently, many Cisco devices will enumerate Gi interfaces before Fa interfaces, meaning that Gi1/1, Gi1/2 and Fa1/1 will become ports 1, 2 and 3 in that order. This represents a change in the port number assignments that NAV has made earlier. Previously, it would have started assigning port numbers to the Fa interfaces first (either because their ifindex values are lower, or because they sort first alphabetically). Consequently, if you upgrade your NAV installation to the trunk (or the upcoming 3.1.1 version), any switch you have that has both GigabitEthernet and FastEthernet interfaces will have its ports renumbered in NAV. The complaints I've received about this largely revolve around the fact that some users have implemented external systems that relate to NAV by referring to module and port numbers, and that this reference breaks when NAV suddenly decides to assign new port numbers. A typical example of this would be that when searching for a MAC address in the Machine Tracker before the change, you might be told a machine is connected to foo-sw, module 1, port *5*. Then you upgrade NAV, perform the same search in the Machine Tracker, and now you are told the machine in question is connected to foo-sw, module 1, port *7*. The interface name in these two cases will remain the same, e.g. "FastEthernet1/0/5" or "Fa1/0/5", but this string is not available in the Machine Tracker (yet). Numbering vs. names ------------------- Now, other feedback we've received (both internal and external) tells us that today, port numbers are largely irrelevant in real world situations. Several network engineers have told us that they care about interface names (the ones they see on the CLI, such as Fa1/5), rather than arbitrary port numbers. Their viewpoint is that NAV should place more importance on interface names than on port numbers, meaning we should put interface names in all parts of the user interface that has port numbers today, including the Machine Tracker. The NAV dev-team is leaning towards the latter solution, but this is too big a change for the 3.1.1 bug release, and we might not even have time to do it for version 3.2, which is scheduled for late October. The question is, what do you, the users, think about this? The situation, as it stands, is that a new port number assignment scheme will turn up in the 3.1.1 bug release, because of the submodule bugfix. This may confuse some people, as interface names are not readily available in many parts of the user interface. Should we try to stay with a numbering scheme compatible with the old one for the 3.1.1 release, and wait for interface names in the UI before we change the port numbers? This might delay the 3.1.1 release even further, as we need to make changes to the standing bugfix before the release. Is it okay to renumber ports in the 3.1.1 release, as long as interface names become more prominent in the UI in the 3.2 or 3.3 release? Should we prioritize more prominent interface names in the 3.2 release, or is it okay to wait until the 3.3 release? Now's your chance to influence these decisions, before further implementation takes place. [1] http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1… -- mvh Morten Brekkevold UNINETT

1 1

Nav 3.0 makecricketconfig.pl error
by morten.brekkevold＠uninett.no 06 Okt '06

06 Okt '06

Erik Weber wrote, On 05-10-2006 15:39: > Still using Nav 3.0 (latest debian release, anyone know if a 3.1 is > gonna be released soon?) Actually, Morten Werner is sitting next to me working on that right now. He came up here from Oslo on Wednesday to have a little brainstom/workshop with us. He's also uploaded a preliminary 3.1 package to the official Debian unstable archives, which hopefully means that NAV 3.1 will be part of the next Debian stable release. That said, he's also backporting a 3.1 package for the current stable release. These new packages will also feature automatic database initialization and upgrades on install. > Anyway, when running makecricketconfig.pl i get this error message: > > Use uninitialized value in pattern match (m//) at > /usr/lib/nav/makecricketconfig.pl line 927 > > This happens when it process a switch named nara-sw002-01 (catalyst > 3524XL) > > Anyone know about a fix for it? I don't. But what's on line 927 of /your/ makecricketconfig.pl anyway? I'm looking at makecricketconfig.pl from NAV 3.0.1 (which is in the latest Debian package), and that line is a comment: # Write to file. -- mvh Morten Brekkevold UNINETT

1 0

Field Length of orgid
by mturczan＠nyp.org 03 Okt '06

03 Okt '06

Folks, I tried to import a record with the proper orgid set as follows: F-1196A:10.10.10.10:Org_East_Campus:SW:ro::rw:Access Layer Switch:::: And I received the following error: Syntax error: Field 'orgid' exceeds max field length I assigned the Organisation field the same way, and it seems like the field itself can hold a maximum of 30 characters. Is there another identifier somewhere that corresponds to 'orgid' in the IP Devices bulk import? Regards, Mark -------------------- This electronic message is intended to be for the use only of the named recipient, and may contain information that is confidential or privileged. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the contents of this message is strictly prohibited. If you have received this message in error or are not the named recipient, please notify us immediately by contacting the sender at the electronic mail address noted above, and delete and destroy all copies of this message. Thank you.

2 1

Mahinetracker
by odd.hauge＠hiMolde.no 03 Okt '06

03 Okt '06

Hi. A request/question? Is it possible to get the port description included in the mac search result window? Very often I need to track a machine to a specific switch port, after finding the port I need to get into the Report interface of Nav to find the description of the switch port to see who (what?) is behind the port. If the description of the switch port had been included in the mac-address search result window it would have saved me a lot of time.... - odd arne hauge

1 0

Configuration Help
by ppathiakis＠eagleaccess.com 28 Sep '06

28 Sep '06

Hi, I'm totally confused by the install. I believe I followed everything corrrectly. I've tested mod_python to make sure that it's working correctly. (www.modpython.org) The issue I'm having is that I cannot make NAV the Document Root of the machine. So, things seem to be getting confused. Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 461, in import_module f, p, d = imp.find_module(parts[i], path) ImportError: No module named nav My httpd.conf file looks like: <Directory /usr/local/wwww/nav/apache/webroot> Options Indexes FollowSymLinks ExecCGI AllowOverride FileInfo Order allow,deny Allow from all </Directory> Alias /nav/ "/usr/local/www/nav/apache/webroot/" The standard .htaccess file is in place in "webroot" What am I missing? Thank you for any help! p. >From ppathiakis at eagleaccess.com Fri Sep 29 12:26:39 2006 From: ppathiakis at eagleaccess.com (Paul J. Pathiakis) Date: Fri Sep 29 17:26:42 2006 Subject: [Nav-users] NAV mod_python.publisher errors Message-ID: <EAED38651CF6BF46A8D2BCD9D4EEAA6D76C91F(a)BIGMAIL.eagleinvsys.com> i, would someone please respond to this? I've posted twice to this list and no one responds. I'm sorry if this is such a low level question but I'd really like to get it working. I have index.py. It seems to be found by the browser and an attempt is made by python to render it and display it. However, I get the following: Mod_python error: "PythonHandler mod_python.publisher" Traceback (most recent call last): File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/lib/python2.4/site-packages/mod_python/publisher.py", line 213, in handler published = publish_object(req, object) File "/usr/local/lib/python2.4/site-packages/mod_python/publisher.py", line 412, in publish_object return publish_object(req,util.apply_fs_data(object, req.form, req=req)) File "/usr/local/lib/python2.4/site-packages/mod_python/util.py", line 439, in apply_fs_data return object(**args) File "/usr/local/www/data/nav/index.py", line 44, in index if req.session.has_key('user'): AttributeError: 'mp_request' object has no attribute 'session' Now, I can see on line 44 in index.py there is the exact line right under the last part of the error. Why is the AttributeError being generated? Why is mp_request (mod_python reqest object) missing the attribute session? What is missing from httpd.conf file or other files that is not allowing this to continue? Thank you, Paul Pathiakis

1 0

Editdb doesn't like hostnames?
by morten.brekkevold＠uninett.no 28 Sep '06

28 Sep '06

Mark Turczan wrote, On 26-09-2006 16:31: > I was wondering if it's an absolute that when bulk importing IP Devices > that the ip field needs to be a numeric address and not a DNS name. Apparently it is. As the format goes: #roomid:ip:orgid:catid:[ro:serial:rw:function:subcat1:subcat2..] ^^ Firstly, EditDB should not blow up like that over such an error in the input. I would likely file that as a bug - if you'd like to, you can file it yourself at http://sf.net/projects/nav . Secondly, I do think it should support DNS lookup when host names are used in bulk input. I believe it already does so when adding a single device. This should be added as a feature request on the above page. -- mvh Morten Brekkevold UNINETT

2 1

Tomcat
by erik.weber＠allianse.no 27 Sep '06

27 Sep '06

> >> What happens if you attempt to manually browse the above > URL from the > >> java console? > > > > Nothing, the page keeps loading but nothing comes out. > > Then you should take a look at your Tomcat logs, see if they > mention anything suspicious. You seem to have the same > response delay issue with the network explorer servlet, so > something is definitely up with Tomcat. Well, I got it working (it was a tomcat misconfiguration). Now I have another question regarding the traffic map; Is it possible to add switches and not just routers to containers? I'm planning to use this on a company network but it consists of switches only, But I still want to monitor the traffic between them. -- Erik Weber

1 0

Tomcat
by morten.brekkevold＠uninett.no 26 Sep '06

26 Sep '06

Erik Weber wrote, On 26-09-2006 13:43: >> What happens if you attempt to manually browse the above URL from >> the java console? > > Nothing, the page keeps loading but nothing comes out. Then you should take a look at your Tomcat logs, see if they mention anything suspicious. You seem to have the same response delay issue with the network explorer servlet, so something is definitely up with Tomcat. -- mvh Morten Brekkevold UNINETT

1 0

Tomcat
by morten.brekkevold＠uninett.no 26 Sep '06

26 Sep '06

Erik Weber wrote, On 26-09-2006 11:05: > As for the traffic map, this is what I get in my java console: > > URL: > https://erik-nav/vPServer/servlet/vPServer?section=boks&gruppeid=0&reque > st=listConfig,listRouters,listRouterGroups,listRouterXY&time=-300,0&type > =avg > Create new ServerFetcher > Waiting on inputQ... > (statusbar says: Applet vlanPlot inited) > And that's it, it just can't load. This means the applet is loaded, but it is waiting for map/load data from the server. What happens if you attempt to manually browse the above URL from the java console? -- mvh Morten Brekkevold UNINETT

1 0

Tomcat
by erik.weber＠allianse.no 26 Sep '06

26 Sep '06

Alexander Krapivin wrote: >> Anyone got any ideas of what could be wrong? Tomcat? Apache2? > This is definitely Tomcat problem. How should I troubleshoot it? Catalina.log: Using CATALINA_BASE: /var/lib/tomcat4 Using CATALINA_HOME: /usr/share/tomcat4 Using CATALINA_TMPDIR: /var/lib/tomcat4/temp Using JAVA_HOME: /usr/lib/kaffe Created MBeanServer with ID: [UID: 146065796,1159262562151,-32768]:erik-nav:1 Starting service Tomcat-Apache Apache Tomcat/4.1 erik-nav:~$ ls /var/lib/tomcat4/webapps/ navAdmin.war ROOT vPServer.war erik-nav:~$ ls /var/lib/tomcat4/shared/lib/ ConfigParser.jar Event.jar libsnmp-1.4.jar networkDiscovery Util.jar Database.jar getBoksMacs Logger.jar postgresql.jar eventEngine getDeviceData NetboxInfo.jar SimpleSnmp.jar /etc/tomcat4/server.xml: <Server port="8005" shutdown="SHUTDOWN" debug="0"> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" debug="0"/> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListe$ debug="0"/> <GlobalNamingResources> <Environment name="simpleValue" type="java.lang.Integer" value="30"/> </GlobalNamingResources> <Service name="Tomcat-Apache"> <Connector className="org.apache.catalina.connector.warp.WarpConnector" port="8180" minProcessors="5" maxProcessors="75" enableLookups="true" appBase="webapps" acceptCount="10" debug="0"/> <Engine className="org.apache.catalina.connector.warp.WarpEngine" name="Apache" debug="0"> <Logger className="org.apache.catalina.logger.FileLogger" prefix="mod_webapp_" suffix=".log" timestamp="true"/> <Realm className="org.apache.catalina.realm.MemoryRealm" /> </Engine> </Service> </Server> Any pointers, ideas is greatly appreciated. -- Erik Weber

1 0

One More Time --// Error while accessing web-interface/. . . .
by kaa＠msu.net 04 Sep '06

04 Sep '06

Good day, There is an excellent HOWTO installing NAV on RHEL4/CentOS suitable for most Linux distributions on http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 Leonid Satanovsky wrote: >> Good time of the day, people! >> >> This time, accessing the web-interface I get the error: >> >> -------------------------------------------------------------- >> Mod_python error: "PythonHeaderParserHandler nav.web" >> >> Traceback (most recent call last): >> >> File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch >> result = object(req) >> >> File "/usr/local/nav/lib/python/nav/web/__init__.py", line 49, in headerparserhandler >> import nav.web.auth >> >> File "/usr/local/nav/lib/python/nav/web/auth.py", line 32, in ? >> from nav import db >> >> File "/usr/local/nav/lib/python/nav/db/__init__.py", line 31, in ? >> import psycopg psycopg package need to be installed. >> >> ImportError: libpq.so.4: cannot open shared object file: No such file or directory >> -------------------------------------------------------------- >> >> (?) Does anybody know, what may be wrong? >> >> Leonid. > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users -- With best regards, Alexander Krapivin mailto:kaa@msu.net NOC MSUNET ICQ UIN:3967345 MSU, Moscow, Russia >From roart at nvg.ntnu.no Fri Sep 8 14:47:04 2006 From: roart at nvg.ntnu.no (Roar Thronæs) Date: Fri Sep 8 13:47:16 2006 Subject: [Nav-users] 3com and partial FreeBSD support Message-ID: <20060908114704.GB18951(a)nvg.ntnu.no> Hi I have made some support for 3com vlan and port probing. (Not everyone has thrown these out yet) 3Com patches and FreeBSD tips are available at: ftp://ftp.nvg.ntnu.no/pub/nav _3com.java.patch snmpoid.sql QueryBoks.java.patch The rest is some tips for FreeBSD GSW and related patches. Some questions: Has anyone "lost" SNMP data because drexelsnmp (javasnmp) did not give the exceptions with v2c as it did with v1? (At least it happened against net-snmp) Is other equipment than Cisco (like FreeBSD with net-snmp) supposed to be probed as Cisco? Regards, Roar Thron?s >From morten.vold at uninett.no Mon Sep 11 16:35:19 2006 From: morten.vold at uninett.no (Morten Brekkevold) Date: Mon Sep 11 15:35:28 2006 Subject: [Nav-users] cricket compilation error 2nd time please help me In-Reply-To: <44EEE16F.9070202(a)uninett.no> References: <20060726150510.6719.qmail(a)web8902.mail.in.yahoo.com> <44EEE16F.9070202(a)uninett.no> Message-ID: <45056617.9030000(a)uninett.no> Morten Vold wrote: >> Can't locate ConfigTree/Cache.pm in @INC (@INC contains: /lib /etc/perl /usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/lib/nav/makecricketconfig.pl line 84. >> BEGIN failed--compilation aborted at /usr/lib/nav/makecricketconfig.pl line 84. >> >> $gCricketHome in my cricket-conf.pl >> >> $gCricketHome = "/usr/local/cricket"; >> $gInstallRoot = "$gCricketHome/cricket"; >> $gConfigRoot = "$gCricketHome/cricket-config"; > > Is your cricket-conf.pl properly located in /usr/local/cricket/cricket/ > ? Your error messages make it look like gInstallRoot has not been set, > or its value was not found by makecricketconfig. Rajesh, did you ever figure this out? UNINETT is about to launch several Debian based servers for our customers, and these will be running NAV. When preparing installation procedures for these servers, I've had the opportunity to actually install and test the Debian package of NAV myself. NAV is unfortunately picky about where it likes its Cricket to be installed, something I hope we'll be fixing soon. I've followed the README.Debian file, and I happened to overlook part of the installation instructions. With Cricket installed from source in /usr/local/cricket as README.Debian suggests, I have the same problem as you do, and I've found that the quickest solution to the problem is to do as the README says and add the following symlink inside /usr/local/cricket: ln -s ./ cricket -- mvh The engineer previously known as Morten Vold UNINETT

1 0

... error Compiling IPInfo.tmpl -> IPInfo.py
by werner＠debian.org 04 Sep '06

04 Sep '06

On Mon, Aug 28, 2006 at 11:36:07AM +0200, Morten Vold wrote: > Newer versions of Cheetah seem to have introduced slight syntax changes. > Unfortunately I am unable to immediately test on a newer version of > Cheetah than 1.0, which will still compile the template as is. > > Could you please try to apply the attached patch to the IPInfo.tmpl file > and compile again? This also seemed to work just fine on cheetah 2.0~rc7-1 in Debian, thanks! :) - Werner >From satanovskyl at mail.ru Mon Sep 4 14:35:04 2006 From: satanovskyl at mail.ru (Leonid Satanovsky) Date: Mon Sep 4 11:35:13 2006 Subject: [Nav-users] One More Time --// Error while accessing web-interface/. . . . Message-ID: <E1GKArA-000Bnp-00.satanovskyl-mail-ru(a)f55.mail.ru> > Good time of the day, people! > > This time, accessing the web-interface I get the error: > > -------------------------------------------------------------- > Mod_python error: "PythonHeaderParserHandler nav.web" > > Traceback (most recent call last): > > File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch > result = object(req) > > File "/usr/local/nav/lib/python/nav/web/__init__.py", line 49, in headerparserhandler > import nav.web.auth > > File "/usr/local/nav/lib/python/nav/web/auth.py", line 32, in ? > from nav import db > > File "/usr/local/nav/lib/python/nav/db/__init__.py", line 31, in ? > import psycopg > > ImportError: libpq.so.4: cannot open shared object file: No such file or directory > -------------------------------------------------------------- > > (?) Does anybody know, what may be wrong? > > Leonid.

1 0

Thanx to Morten //-- MYSTERIOUS MISSING FILES .... ..*|*..
by morten.vold＠uninett.no 29 Aug '06

29 Aug '06

Leonid Satanovsky wrote: > Thank you, Morten ! Your patch for the Cheetah template helped and it > all (NAV 3.1.0) was finally built (!). No problem :) It would also be nice if you later would check that the /ipinfo/ page still looks normal after this change. > Now I'm going to make it work ... and actually I am a little puzzled > by the fact that I do not find THE instructions for istallation of > version 3.1.0 .... At the moment I use "Installing on SuSe" > "manual"... we'll see how it goes... If you're a competent Linux sysadmin, it shouldn't be a problem. Just direct any questions to the list :) > I DIDN'T FIND "types.sql" in /usr/local/nav/doc/sql/ while it is > mentioned in "/usr/local/nav/doc/sql/README" file. Interesting, what > is that supposed to mean? Bug in the 3.1 release; types.sql is not copied by the make process, but you will find it in the source directory doc/sql/. -- mvh Morten Vold UNINETT

1 0

Help! Help please! Question about auto discovery
by ppecriaux＠auchan.fr 08 Aug '06

08 Aug '06

Subject: Question about auto discovery Hi all, I need some help!!!!!!! In the release notes for the V3.1 date 30 June 2006: Autodiscovery command line tool added to contrib. This tool will try to discover every managed network device within your network, and add them to NAV. I really need some help about it! For information we have about 10.000 nodes and about 300.000 ports to manage. Every routeurs and switches are CISCO devices. This for 130 locations around the world. So you'll easily understand that autodiscovery is mandatory for us! We're currently use HPOV NNM but we want to change for something else, the probleme is that there is no autodiscovery engine working "correctly" to discover our large network. Some softwares use range IP for discovery or use only 1 snmp community and so on....that's not the right way to discover a large network with a lot of subnets I really think that NAV can be the right solution for us, but only if autodiscovery works fine! I hope!!! Thanx before all for the support Best regards from france. Read you soon. Patrice Pecriaux ppecriaux(a)auchan.fr >From kjartan.malde at uis.no Wed Aug 9 15:49:52 2006 From: kjartan.malde at uis.no (kjartan.malde(a)uis.no) Date: Wed Aug 9 14:50:00 2006 Subject: [Nav-users] postgres and arnold Message-ID: <OFC43206AE.E452A279-ONC12571C5.00460912-C12571C5.00467BF5(a)uis.no> Hi I've tried to configure Arnold, but get this error when trying the arnold-link in webinterface. Can anyone help me? Mod_python error: "PythonHandler arnoldhandler" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/arnold/arnoldhandler.py", line 95, in handler printBlocked(cur,page,sort, section) File "/usr/local/nav/apache/webroot/arnold/arnoldhandler.py", line 277, in printBlocked cur.execute("SELECT DISTINCT identityid,orgid,ip,mac,dns,netbios,text as reason, multiple,starttime,lastchanged,swsysname as sysname, swmodule,swport,userlock,secret FROM identity LEFT JOIN blocked_reason USING (blocked_reasonid) WHERE blocked_status='disabled' ORDER BY " + sort) ProgrammingError: ERROR: permission denied for relation identity SELECT DISTINCT identityid,orgid,ip,mac,dns,netbios,text as reason, multiple,starttime,lastchanged,swsysname as sysname, swmodule,swport,userlock,secret FROM identity LEFT JOIN blocked_reason USING (blocked_reasonid) WHERE blocked_status='disabled' ORDER BY ip mvh Kjartan Malde UiS >From stein.magnus at jodal.no Wed Aug 9 16:13:20 2006 From: stein.magnus at jodal.no (Stein Magnus Jodal) Date: Wed Aug 9 15:13:22 2006 Subject: [Nav-users] postgres and arnold In-Reply-To: <OFC43206AE.E452A279-ONC12571C5.00460912-C12571C5.00467BF5(a)uis.no> References: <OFC43206AE.E452A279-ONC12571C5.00460912-C12571C5.00467BF5(a)uis.no> Message-ID: <1155129200.11901.4.camel(a)localhost.localdomain> On Wed, 2006-08-09 at 14:49 +0200, kjartan.malde(a)uis.no wrote: > Hi > > I've tried to configure Arnold, but get this error when trying the > arnold-link in webinterface. Can anyone help me? *cut* > File "/usr/local/nav/apache/webroot/arnold/arnoldhandler.py", line 277, > in printBlocked > cur.execute("SELECT DISTINCT identityid,orgid,ip,mac,dns,netbios,text > as reason, multiple,starttime,lastchanged,swsysname as sysname, > swmodule,swport,userlock,secret FROM identity LEFT JOIN blocked_reason > USING (blocked_reasonid) WHERE blocked_status='disabled' ORDER BY " + > sort) > > ProgrammingError: ERROR: permission denied for relation identity Hi, It looks like the nav database user does not have permission to the identity table (and maybe other tables) in the arnold database. This should fix it: $ sudo -u postgres psql arnold ALTER TABLE identity OWNER TO nav; Use '\d' in psql to check if the other tables and sequences also are owned by the nav database user. Sequences are altered with exactly the same syntax (ALTER TABLE). -- Stein Magnus Jodal http://www.jodal.no/

1 0

Network Explorer and Traffic map Tomcat issues.
by sommerjobb＠froisland.no 07 Aug '06

07 Aug '06

MetaNav 3.0.1 on Debian. Using Tomcat4 and kaffe as described in the README.debian install dokument that comes with the pakage. I get Network Explorer to work, but Traffic Map only hangs on loading (in IE and Mozilla) and require the browser to be killed. I can not get the tomcat localhost:8080 test page to show. Using Tomcat5.12 and 5.17 with jre1-5.0 I get the tomcat test page, localhost:8080, to work. But Network Explorer gives me an error message (copy in the bottom of the mail) and Traffic Map has the same problem as with tomcat4. I can not find a similar configuration file that is described in README.debian as /etc/default/tomcat4, where TOMCAT_SECURITY=no is set. I have tried to use the kaffe version that works somewhat with tomca4 for 5.12 and 5.17, with no success and jre1-5.0 for tomcat4, but that does not work either. Tried with JDK1-5.0 too, but with the same result. Can anyone point me in the direction of a solution to this problem? ERROR MESSAGE: Could not connect to servlet Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/nav/web/pyproxy/proxy.py", line 61, in handler user=user, session=req.session.id) File "/usr/lib/python2.3/site-packages/nav/web/pyproxy/proxy.py", line 124, in doRequest request.request(method, path, query, headers) File "/usr/lib/python2.3/httplib.py", line 721, in request self._send_request(method, url, body, headers) File "/usr/lib/python2.3/httplib.py", line 742, in _send_request self.endheaders() File "/usr/lib/python2.3/httplib.py", line 715, in endheaders self._send_output() File "/usr/lib/python2.3/httplib.py", line 600, in _send_output self.send(msg) File "/usr/lib/python2.3/httplib.py", line 567, in send self.connect() File "/usr/lib/python2.3/httplib.py", line 551, in connect raise socket.error, msg error: (111, 'Connection refused') --- Marius Fr?island

1 0

Re: Some problems.
by sommerjobb＠froisland.no 04 Aug '06

04 Aug '06

Problem 1, was caused by me attempting to add the same device with different IP address twice, resulting in identical serial number. -----Original Message----- From: "Marius Fr?island" <sommerjobb(a)froisland.no> To: nav-users(a)itea.ntnu.no Date: Mon, 31 Jul 2006 14:46:41 +0200 Subject: Some problems. > I'm using version 3.0.1 on debian and have a few problems that I hope > some > of you can help me with. > > > PROBLEM 1 > When adding IP devices: Everything looks fine when entering incormation > in > the first "Add IP device", MetaNav is able to contact the device and > get > serialnumer. But when I clik continue for the second "Add IP device" > page > I get a error message and the device is not added. > I even tried to go back, back in the browser and change only the IP and > that would work for some addresses. So this error seems to be > conected to the device it contacts, not the room, location and such > information. > > Error message: > Mod_python error: "PythonHandler editdb" > > Traceback (most recent call last): > > File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line > 299, > in HandlerDispatch > result = object(req) > > File "/var/www/nav/editdb/editdb.py", line 156, in handler > output = editPage(req,pageList[table](),request,unicodeError) > > File "/var/www/nav/editdb/editdb.py", line 463, in editPage > outputForm,action) > > File "/var/www/nav/editdb/editdb.py", line 2435, in add > disabled=True)) > > TypeError: __init__() takes at least 2 non-keyword arguments (1 given) > > > PROBLEM 2 > When I try to enter Toolbox->Traffic Map (vlanPlot) > > Tried on windows xp with different browsers > in firefox it crashes the browser and I have to use taske manager to > kill it. > in IE it just stands loading for ever. > in opera i get the applet but on lue the color map and the choices, not > the actuall map. The top drop down box is empty, the other one has > reasonable choices. > > Marius Froisland

1 0

by roar.pettersen＠uib.no 28 Jul '06

28 Jul '06

Hello ! > error: (111, 'Connection refused') Is your Tomcat server started and/or correct configured ? Verify that your server.xml have this configuration : <Connector port="8080" address="127.0.0.1"> -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From sommerjobb at froisland.no Mon Jul 31 15:46:41 2006 From: sommerjobb at froisland.no (Marius =?iso-8859-1?Q?Fr=F8island?=) Date: Mon Jul 31 14:47:29 2006 Subject: [Nav-users] Some problems. Message-ID: <WorldClient-F200607311446.AA46410013(a)froisland.no> I'm using version 3.0.1 on debian and have a few problems that I hope some of you can help me with. PROBLEM 1 When adding IP devices: Everything looks fine when entering incormation in the first "Add IP device", MetaNav is able to contact the device and get serialnumer. But when I clik continue for the second "Add IP device" page I get a error message and the device is not added. I even tried to go back, back in the browser and change only the IP and that would work for some addresses. So this error seems to be conected to the device it contacts, not the room, location and such information. Error message: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/var/www/nav/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/var/www/nav/editdb/editdb.py", line 463, in editPage outputForm,action) File "/var/www/nav/editdb/editdb.py", line 2435, in add disabled=True)) TypeError: __init__() takes at least 2 non-keyword arguments (1 given) PROBLEM 2 When I try to enter Toolbox->Traffic Map (vlanPlot) Tried on windows xp with different browsers in firefox it crashes the browser and I have to use taske manager to kill it. in IE it just stands loading for ever. in opera i get the applet but on lue the color map and the choices, not the actuall map. The top drop down box is empty, the other one has reasonable choices. Marius Froisland

1 0

Apache/Python configuration problem
by roar.pettersen＠uib.no 25 Jul '06

25 Jul '06

Hello ! > we're trying to install the NAV Software on a FreeBSD 5.4 machine. > We followed the steps described in "Getting Startet". Tomcat, PostgreSQL > and Crickt run proper, but Python doesn't seem to work. Make sure that Apache load the Python module, like this in httpd.conf : LoadModule python_module libexec/apache2/mod_python.so <Directory "/usr/local/nav/apache/webroot"> Options Indexes FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> Alway use bash as your shell, and here is my .bash_profile (for root) : export JAVALIBDIR=/usr/local/nav/lib/java export PYTHONLIBDIR=/usr/local/nav/lib/python export PERLLIBDIR=/usr/local/nav/lib/perl export PYTHONPATH=/usr/local/nav/lib/python export JAVA_HOME=/usr/local/jdk1.4.2 export PATH=$PATH:/usr/local/nav/bin:/usr/local/jdk1.4.2/bin export PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib export CLASSPATH="`echo /usr/local/nav/lib/java/*.jar | tr ' ' ':'`:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/java/classes/snmp.jar:/usr/local/tomcat5.5/common/lib/servlet-api.jar" -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From gsri11 at yahoo.co.in Wed Jul 26 17:05:10 2006 From: gsri11 at yahoo.co.in (rajesh) Date: Wed Jul 26 17:05:30 2006 Subject: [Nav-users] cricket compilation error 2nd time please help me Message-ID: <20060726150510.6719.qmail(a)web8902.mail.in.yahoo.com> Hi, I am trying to compile cricket in my debian linux machine using the following command #/usr/lib/nav/makecricketconfig.pl No path to Cricket specified, searching default paths... Searching in /home/navcron/cricket. Searching in /usr/local/cricket. Found cricket in /usr/local/cricket. Use of uninitialized value in concatenation (.) or string at /usr/lib/nav/makecricketconfig.pl line 82. Can't locate ConfigTree/Cache.pm in @INC (@INC contains: /lib /etc/perl /usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/lib/nav/makecricketconfig.pl line 84. BEGIN failed--compilation aborted at /usr/lib/nav/makecricketconfig.pl line 84. $gCricketHome in my cricket-conf.pl $gCricketHome = "/usr/local/cricket"; $gInstallRoot = "$gCricketHome/cricket"; $gConfigRoot = "$gCricketHome/cricket-config"; I am trying to compile second time and i am feeling very difficult to install NAV i don't know how other people are installing and i need to show demo in my office before going in to production.I am really hope some NAV expert will help me to fix this error. I am installing debian sarge packages after that i am following readme file available in /usr/share/doc/nav/ folder Thanks for your help --------------------------------- Here?s a new way to find what you're looking for - Yahoo! Answers >From tv at solnet.ch Thu Jul 27 14:50:48 2006 From: tv at solnet.ch (Thomas Vogt) Date: Thu Jul 27 13:50:58 2006 Subject: [Nav-users] freebsd 6.1 and nav from subversion In-Reply-To: <Pine.SOC.4.64.0607241328090.8323(a)alf.uib.no> References: <1152617345.5105.11.camel(a)bert.mlan.solnet.ch> <Pine.SOC.4.64.0607111423180.20956(a)alf.uib.no> <1153152217.27078.8.camel(a)bert.mlan.solnet.ch> <44BC8EB7.5010705(a)uninett.no> <1153215985.29990.8.camel(a)bert.mlan.solnet.ch> <44BF2701.7050000(a)uninett.no> <44BF3229.5030102(a)solnet.ch> <1153471418.3219.7.camel(a)bert.mlan.solnet.ch> <Pine.SOC.4.64.0607241328090.8323(a)alf.uib.no> Message-ID: <1154001048.6284.6.camel(a)bert.mlan.solnet.ch> Hello Thank for all the tips. Now most things work as expected. Sometimes when I try to re-compile a the trunk version or update to a newer trunk version I get: BUILD SUCCESSFUL Total time: 6 seconds Building webapps/navAdmin ... (cd webapps/navAdmin && /usr/local/bin/ant ) && touch webapps/navAdmin Buildfile: build.xml prepare: compile: [javac] Compiling 16 source files to /usr/ports/net-mgmt/nav/work/nav-3.1.0/src/webapps/navAdmin/build [javac] /usr/ports/net-mgmt/nav/work/nav-3.1.0/src/webapps/navAdmin/src/Boks.java:9: package javax.servlet does not exist [javac] import javax.servlet.*; [javac] ^ [javac] /usr/ports/net-mgmt/nav/work/nav-3.1.0/src/webapps/navAdmin/src/Boks.java:10: package javax.servlet.http does not exist [javac] import javax.servlet.http.*; It doesn't always happen. So I guess it could be a env. problem but I'm not sure. I set: JAVALIBDIR=/usr/local/nav/lib/java PYTHONLIBDIR=/usr/local/nav/lib/python PERLLIBDIR=/usr/local/nav/lib/perl PYTHONPATH=/usr/local/nav/lib/python JAVA_HOME=/usr/local/diablo-jdk1.5.0 PATH=$PATH:/usr/local/nav/bin:/usr/local/diablo-jdk1.5.0/bin PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib CLASSPATH="`echo /usr/local/nav/lib/java/*.jar | tr ' ' ':'`:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/java/classes/snmp.jar" export PYTHONPATH JAVA_HOME PATH PERL5LIB CLASSPATH PERLLIBDIR PYTHONLIBDIR JAVALIBDIR Tomcat env: CATALINA_BASE=/usr/local/tomcat5.5 CATALINA_HOME=/usr/local/tomcat5.5 CATALINA_TMPDIR=/usr/local/tomcat5.5/temp Is there something missing? Do I've to set something else? Cheers, Thomas Vogt Am Montag, den 24.07.2006, 13:30 +0200 schrieb Roar Pettersen: > Hello ! > > > Is there an example for the tomcat configuration? > > > Here is my quick Tomcat 5.5 config on a FreeBSD system : > > Edited /usr/local/tomcat5.5/conf/server.xml so the following was present: >  > <Connector port="8080" address="127.0.0.1" maxHttpHeaderSize="8192" > > > cd /usr/local/tomcat5.5/webapps > ln -s /usr/local/nav/apache/webapps/*.war . > > > cd /usr/local/tomcat5.5/shared/lib > ln -s /usr/local/nav/lib/java/*.jar . > > Now it is time to re-start the tomcat server. > > > -- > Med vennlig hilsen / Regards; > > Roar Pettersen > Universitetet i Bergen - The University of Bergen > Nygardsgt. 5 - N-5020 BERGEN - Norway > Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 > roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no

1 0

freebsd 6.1 and nav from subversion
by morten.vold＠uninett.no 20 Jul '06

20 Jul '06

Thomas Vogt wrote: > I got another issue. I can't login :). When I click to login link I > get: > > <body onLoad="document.getElementById('username').focus();"> > <table height=40% border=0 width=100%><tr valign=middle><td valign=middle align=center> > > <br><br><br> > <font face=verdana size=1> > <form method="POST" action="/index/login"> > <img src="/images/login/navlogo.gif"><br> > <br><input id="username" type="text" name="login" style="border: 1px solid #99c;"><br><font color=#6699CC>username</font> > <br><input type="password" name="password" style="border: 1px solid #99c;"><br><font color=#6699CC>password</font> > <input type="hidden" name="origin" value=""> > <br><br><input type="submit" value="Log in"> > </form> > </font> > </td></tr></table> > </body> I thought you were attempting to install NAV from trunk, yet, if the above text is what you were served by clicking the login-button, it looks like you are running a pre 3.0.1-version of NAV. This bug was fixed in that release. The problem was that a newer version of mod_python serves this page with an automatic content-type of text/plain, because it couldn't see an <html> at the start of the page. This was fixed by adding full HTML dressing to the login page (which it should have had all along), and just to be sure, the login module forces the content-type to be text/html now. -- mvh Morten Vold UNINETT

1 0

Translate a log file?
by morten.vold＠uninett.no 14 Jul '06

14 Jul '06

SLander(a)hearstsc.com wrote: > Could anyone translate these warnings to English? I am not sure > what they are telling me. Argh, more Norwegian leftovers from NAV 2... I've submitted a bug report so we'll remember to translate this. > This is from the networkDiscovery-topology.html file > ---->[WARNING]: Boks(8): Floor28-6513-1, mer enn en link til boks(31) > floor28-3750-4.home.com, uten at vi vet mp i andre enden. This reads: Floor28-6513-1, more than one link to box(31) floor-28-3750-4.home.com, without knowing mp in the other end. > [WARNING] Conflicting boksbak in mp vs. mpBoksbak for Boks(9): > Floor28-6513-2 Mp: 253 bmp: BoksMpBak [boksbak=8, toIfindex=null], bmpA: > BoksMpBak [boksbak=38, toIfindex=51] boksbak = "boxbehind", BoksMpBak="BoksMpBehind" To be honest, I have no idea what this means, it sounds very implementation specific (e.g., what is an `mp`? `Member of Parliament`? `Military Police`?). Cc: to the original author, Kristian, and hopefully he can shed some light on this. -- mvh Morten Vold UNINETT

3 2

More errors with cricket-config in NAV-3.1.0
by roar.pettersen＠uib.no 12 Jul '06

12 Jul '06

Hello ! > The solution is quite simple - copy the .nav file from > $NAV/doc/cricket/cricket-config/router-interfaces-snmpv1-and-giga/ to > giga-router-interfaces. Run makecricketconfig.pl. The vlanXXX have now the correct description field, all physical interfaces eg gigabitethernet3_6 or fastethernet7_4 have still the "No description available". Any clue ? -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From john.m.bredal at ntnu.no Wed Jul 12 14:57:05 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Wed Jul 12 13:57:08 2006 Subject: [Nav-users] More errors with cricket-config in NAV-3.1.0 In-Reply-To: <Pine.SOC.4.64.0607121121190.10108(a)alf.uib.no> References: <Pine.SOL.4.63-L.0607071031580.18695(a)saruman.uio.no> <44B36A7E.6060002(a)uninett.no> <Pine.SOC.4.64.0607111134070.20956(a)alf.uib.no> <1152694764.44b4b9ece7b39(a)webmail.ntnu.no> <Pine.SOC.4.64.0607121121190.10108(a)alf.uib.no> Message-ID: <1152705425.44b4e391c1eee(a)webmail.ntnu.no> Quoting Roar Pettersen <roar.pettersen(a)uib.no>: > Hello ! > > > The solution is quite simple - copy the .nav file from > > $NAV/doc/cricket/cricket-config/router-interfaces-snmpv1-and-giga/ > to > > giga-router-interfaces. Run makecricketconfig.pl. > > > The vlanXXX have now the correct description field, all physical > interfaces eg gigabitethernet3_6 or fastethernet7_4 have still the > "No > description available". > > Any clue ? > Hm, try to edit the .navfile and do the following: In the "descr"-tag, remove everything in the sql-query after gwportid=$id. --

1 0

freebsd 6.1 and nav from subversion
by tv＠solnet.ch 11 Jul '06

11 Jul '06

Hello List I have some problems to run NAV on freebsd 6.1 (i386). I used the description from http://metanav.ntnu.no/moin.cgi/DevVerToFreeBSD The installation worked without any problems. When I try to start nav with ./nav start I always get an error message like: Fatal error: Could not find the nav.startstop module. Is your PYTHONPATH environment correctly set up? I've set the PYTHONPATH to /usr/local/nav/lib/python but I still got the same error message. This are all python programs I already installed: py24-cheetah-1.0 py24-forgethtml-20041021 py24-forgetsql-0.5.1 py24-mx-base-2.0.6 py24-psycopg-1.1.21 py24-rrdtool_lgpl-0.2.1_1 python-2.4.3 Is there something missing? Cheers, Thomas

1 0

More errors with cricket-config in NAV-3.1.0
by roar.pettersen＠uib.no 11 Jul '06

11 Jul '06

Hi ! Don't know if other NAV users see this problem in Cricket ? Problem description : The description field is "missing" on all "giga-router-interfaces", eg : gigabitethernet3_1 [ Octets ] [ UcastPackets ] [ Errors ] No description available But if I look at a "giga-switch-ports" on the same router/switch then the description field is correct. I use cricket-1.0.5 and the problem is seen on Catalyst 6500 (both Sup720 and Sup2.2) Guess this problem is for John Magne. :-) -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kjetil.olsen at usit.uio.no Tue Jul 11 14:14:11 2006 From: kjetil.olsen at usit.uio.no (Kjetil Otter Olsen) Date: Tue Jul 11 13:14:22 2006 Subject: [Nav-users] More errors with cricket-config in NAV-3.1.0 In-Reply-To: <Pine.SOC.4.64.0607111134070.20956(a)alf.uib.no> References: <Pine.SOL.4.63-L.0607071031580.18695(a)saruman.uio.no> <44B36A7E.6060002(a)uninett.no> <Pine.SOC.4.64.0607111134070.20956(a)alf.uib.no> Message-ID: <1546.85.164.170.88.1152616451.squirrel(a)webmail.uio.no> On Tue, July 11, 2006 11:43, Roar Pettersen wrote: > Hi ! > > Don't know if other NAV users see this problem in Cricket ? It's an old error from the 3.0.0 release which has been reported before (at least during the big NAV-meeting early this year). The database is correct, so I assume that "make-cricket-config" is to blame... Lets hope for a fix real soon now :-) --Kjetil

1 0

Problem with Browsing rrd files
by SLander＠hearstsc.com 10 Jul '06

10 Jul '06

>Then navigate directly to >http://NavServer/browse/rrd (typing nothing after rrd), without clicking >your way to the rrd browser from somewhere else in the interface. When I do this, I get a Search menu, with DataSource and a text box, and search button, and below that a Category box with buttons "Add Selected", "Add and join", and Cancel. I can't seem to do much from here - If I click on anything in Category, it selects it, and then almost immediately unselects it - buttons don't seem to do much at this point! The Current path at this point is Home > IP Device Center I will take another look at rrdtool and pyrrdtool while you are thinking about this.... Scott Morten Vold <morten.vold@unin To: SLander(a)hearstsc.com ett.no> cc: nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] Problem with Browsing rrd files 07/10/2006 06:06 AM SLander(a)hearstsc.com wrote: > Morten, > > If I manually enter the url, I get the same result - segfault and > blank screen. If I change the rrdBrowser.conf file to point to a > non-existent location, IE, instead of /tmp/rrd_ as the prefix, I use just > "rrd_", then I get a menu with "year month week day hour" and some choose > action items. But, obviously, no graph. That's not what your supposed to see at all. The rrdBrowser stores most of its interactive state in your user session, which is why I asked you to completely close your browser (to remove anything left in your session data) - alternatively log out of NAV or remove the NAV cookie from your browser. Then navigate directly to http://NavServer/browse/rrd (typing nothing after rrd), without clicking your way to the rrd browser from somewhere else in the interface. Even typing a non-existant location in your rrdBrowser.conf should not take your a menu with "year month week day hour" when typing that URL directly... This is really hard to debug, since a segfault can only stem from native code - which NAV doesn't contain at all. The best way would probably be to debug the apache process, but that could prove really ugly. If the path we're on right now doesn't lead anywhere, I'm not really sure how I can help you, short of suggesting that you reinstall rrdtool and pyrrdtool completely, just to see what happens. -- mvh Morten Vold UNINETT (See attached file: signature.asc) This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message.

1 0

rrdtool question
by wj_peng24＠yahoo.com.cn 07 Jul '06

07 Jul '06

Hello everyone To install nav3.1.0, I have got a problem about Compiling the SimpleSnmp, the system shows that: BUILD FAILED /nav/nav-3.1.0/src/SimpleSnmp/build.xml:30: Compile failed; see the compiler err or output for details. And there is another problem about the rrdtool. As I know , the py-rrdtool-0.21 can't support rrdtool of version 1.2 or over, how about the rrdtool-python-1.2.3, dose it support rrdtool-1.2.x? can anybody who can help me ? also ,I can only find the nav-3.1.0 source package, is anybody who has got the rpm package, please tell me where can I get it. Thanks __________________________________________________ žÏ¿ì×¢²áÑÅ»¢³¬ŽóÈÝÁ¿Ãâ·ÑÓÊÏä? http://cn.mail.yahoo.comFrom wj_peng24 at yahoo.com.cn Fri Jul 7 16:20:58 2006 From: wj_peng24 at yahoo.com.cn (wenjun peng) Date: Fri Jul 7 09:21:10 2006 Subject: [Nav-users] psycopg Message-ID: <20060707072058.94623.qmail(a)web15910.mail.cnb.yahoo.com> Hello, When I start the web interface, the page can't be show out, and it said : ImportError: /usr/lib/python2.4/site- packages/psycopgmodule.so: failed to map segment from shared object: Permission denied what's wrong with the module psycopg __________________________________________________ žÏ¿ì×¢²áÑÅ»¢³¬ŽóÈÝÁ¿Ãâ·ÑÓÊÏä? http://cn.mail.yahoo.comFrom a.l.prois at usit.uio.no Fri Jul 7 11:40:44 2006 From: a.l.prois at usit.uio.no (=?ISO-8859-1?Q?Asbj=F8rn_Pr=F8is?=) Date: Fri Jul 7 10:40:53 2006 Subject: [Nav-users] Errors with cricket-config from NAV-3.1.0 Message-ID: <Pine.SOL.4.63-L.0607071031580.18695(a)saruman.uio.no> Helu. When installing a fresh 3.1.0 of NAV, with the cricket configs etc from that release there are some problems. --- snip --- -bash-3.00# cat ~navcron/cricket/cricket-logs/giga.0 [07-Jul-2006 10:33:01 ] Log level changed from warn to info. [07-Jul-2006 10:33:01 ] Starting collector: Cricket version 1.0.5 (2004-03-28) [07-Jul-2006 10:33:01*] Unknown subtree /giga-router-interfaces. [07-Jul-2006 10:33:01*] Unknown subtree /giga-switch-ports. [07-Jul-2006 10:33:01*] Unknown subtree /giga-router-interfaces. [07-Jul-2006 10:33:01*] Unknown subtree /giga-switch-ports. [07-Jul-2006 10:33:01 ] Processed 0 targets in 0 seconds. --- /snip --- It doesnt match the new subtree structure (router-interfaces, router-interfaces-snmpv1-and-giga, switch-ports, switch-ports-snmpv1-and-giga and so on).. This is causing lots of missing switch and router-ports! The solution is, i guess, i to use the cricket-setup from nav-3.0.1 meanwhile! Just a tip for those reinstalling NAV from scratch with 3.1.0 #:) -Asbj?rn- >From wj_peng24 at yahoo.com.cn Fri Jul 7 18:25:38 2006 From: wj_peng24 at yahoo.com.cn (wenjun peng) Date: Fri Jul 7 11:25:55 2006 Subject: [Nav-users] introduction Message-ID: <20060707092538.17539.qmail(a)web15906.mail.cnb.yahoo.com> hello, Can anyone who write a new installations about how to install the nav-3.1.0 in ferdora core5 and also how to configure it. it is better to list the whole things that needed during installation. __________________________________________________ žÏ¿ì×¢²áÑÅ»¢³¬ŽóÈÝÁ¿Ãâ·ÑÓÊÏä? http://cn.mail.yahoo.comFrom morten.vold at uninett.no Mon Jul 10 13:06:09 2006 From: morten.vold at uninett.no (Morten Vold) Date: Mon Jul 10 12:06:18 2006 Subject: [Nav-users] Problem with Browsing rrd files In-Reply-To: <OF8925035B.D5AD17F5-ON852571A2.004AEB13-852571A2.004BA622(a)hearstsc.com> References: <OF8925035B.D5AD17F5-ON852571A2.004AEB13-852571A2.004BA622(a)hearstsc.com> Message-ID: <44B22691.4010901(a)uninett.no> SLander(a)hearstsc.com wrote: > Morten, > > If I manually enter the url, I get the same result - segfault and > blank screen. If I change the rrdBrowser.conf file to point to a > non-existent location, IE, instead of /tmp/rrd_ as the prefix, I use just > "rrd_", then I get a menu with "year month week day hour" and some choose > action items. But, obviously, no graph. That's not what your supposed to see at all. The rrdBrowser stores most of its interactive state in your user session, which is why I asked you to completely close your browser (to remove anything left in your session data) - alternatively log out of NAV or remove the NAV cookie from your browser. Then navigate directly to http://NavServer/browse/rrd (typing nothing after rrd), without clicking your way to the rrd browser from somewhere else in the interface. Even typing a non-existant location in your rrdBrowser.conf should not take your a menu with "year month week day hour" when typing that URL directly... This is really hard to debug, since a segfault can only stem from native code - which NAV doesn't contain at all. The best way would probably be to debug the apache process, but that could prove really ugly. If the path we're on right now doesn't lead anywhere, I'm not really sure how I can help you, short of suggesting that you reinstall rrdtool and pyrrdtool completely, just to see what happens. -- mvh Morten Vold UNINETT

1 0

Missing file?
by SLander＠hearstsc.com 06 Jul '06

06 Jul '06

Hello, On installing NAV3.1, the notes mention a new autodiscovery tool: * Autodiscovery command line tool added to contrib. This tool will try to discover every managed network device within your network, and add them to NAV. But, I don't see this on install. In the src directory, I see autodiscovery. If I try to build autodiscovery, I get: linux:/data/projects/Nav/nav-3.1.0/src/autodiscovery # ant install Buildfile: build.xml init: [mkdir] Created dir: /data/projects/Nav/nav-3.1.0/src/autodiscovery/build compile: [javac] Compiling 2 source files to /data/projects/Nav/nav-3.1.0/src/autodiscovery/build dist: [mkdir] Created dir: /data/projects/Nav/nav-3.1.0/src/autodiscovery/dist [jar] Building jar: /data/projects/Nav/nav-3.1.0/src/autodiscovery/dist/autodiscovery.jar install: [mkdir] Created dir: /data/projects/Nav/nav-3.1.0/src/autodiscovery/ ${DESTDIR}/usr/local/nav/lib/java/autodiscovery [copy] Copying 1 file to /data/projects/Nav/nav-3.1.0/src/autodiscovery/ ${DESTDIR}/usr/local/nav/lib/java/autodiscovery [mkdir] Created dir: /data/projects/Nav/nav-3.1.0/src/autodiscovery/ ${DESTDIR}/usr/local/nav/bin BUILD FAILED /data/projects/Nav/nav-3.1.0/src/autodiscovery/build.xml:54: Warning: Could not find file /data/projects/Nav/nav-3.1.0/src/autodiscovery/autodiscovery.sh to copy. Is there a file, autodiscovery.sh, that is missing from the distribution? Or, am I just being dumb? Thanks Scott This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message. >From wj_peng24 at yahoo.com.cn Thu Jul 6 11:05:14 2006 From: wj_peng24 at yahoo.com.cn (wenjun peng) Date: Thu Jul 6 04:05:28 2006 Subject: [Nav-users] rrdtool Message-ID: <20060706020514.72865.qmail(a)web15903.mail.cnb.yahoo.com> Hello, I am using nav-3.1.0, and installed rrdtool1.2.x, but as the installing note said, the py-rrdtool would not support rrdtool over 1.0, then I download rrdtool-python1.2.x, is that ok? --------------------------------- ÇÀ×¢ÑÅ»¢Ãâ·ÑÓÊÏä-3.5GÈÝÁ¿£¬20MžœŒþ£¡ From odd.hauge at hiMolde.no Thu Jul 6 09:23:35 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Jul 6 08:25:02 2006 Subject: [Nav-users] Switchport Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C2A36AAE(a)stam.himolde.no> Now are all router-prefixes back in Nav. So everything seems fines. Thanks ;) But there are still problem with some switches. Both my HP Procurve 2848 and HP Procurve 2650 have wrong number of ports, and vlan is missing from the switchport report. Some (3 of 6) Cisco Catalyst 2948 (Fixed Cat 4000 switches running catos) are reported with 102 ports.... But the 3 other 2948 switches are reported correctly. vlan are missing from som switches. Can this be due to no activity on the swithes ? - odd arne > -----Original Message----- > From: Hauge Odd Arne > Sent: Wednesday, July 05, 2006 9:26 PM > To: 'Morten Vold' > Cc: nav-users(a)itea.ntnu.no > Subject: RE: [Nav-users] Switchport > > > > > Thanks for allowing us access to debug your installation. It seems > > your report.conf hasn't been updated in a while. The > swport report in > > your report.conf seems to be a version that's over a year > old, and it > > contains errors. > > > Hmm, I don't comment that one.... But maybe the installation > script shall update config files to, with a warning for us to > check if the new config files needs any update.... I usually > check the files in the nav/conf directory, but I have > forgotten the report/report.conf directory. > Shame on me ! > > But now I have lost my router-prefixes for local vlans. The > vlans are defined on a GSW box. You may take a look at > /prefix report. > > - odd arne > > > >

1 0

Editdb error
by Jan.Susegg＠hint.no 03 Jul '06

03 Jul '06

I have upgraded to NAV 3.1.0 and I got a problem with accessing EDITDB Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.2/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/lib/python2.2/site-packages/mod_python/apache.py", line 457, in import_module module = imp.load_module(mname, f, p, d) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 29, in ? import editTables,nav.Snmp,sys,re,copy,initBox,forgetSQL,nav.web File "/usr/local/nav/lib/python/nav/Snmp.py", line 33, in ? from pysnmp import role, v1, v2c, asn1 ImportError: cannot import name role Can anyone tell me how to solve this problem? best regards Jan Susegg North-Trondelag University College >From kreide at gmail.com Mon Jul 3 15:26:46 2006 From: kreide at gmail.com (Kristian Eide) Date: Mon Jul 3 14:26:51 2006 Subject: [Nav-users] Announcement: NAV 3.1.0 is out In-Reply-To: <44A8D9E2.6070700(a)uninett.no> References: <8EEE7738AEDF6947B3E5508A0244D1C2A36A31(a)stam.himolde.no> <44A8D9E2.6070700(a)uninett.no> Message-ID: <b4c110fd0607030526s6ad2e098pacb80842a69cbed0(a)mail.gmail.com> > So the tricky part now is to figure out which changes you've already > included in your database, and which ones you may have overlooked NAV really needs to get a proper version system for its schema changes or it will be very hard to manage such changes in any reasonable way (manually creating sql patch scripts is not the way to go). -- Kristian >From roar.pettersen at uib.no Mon Jul 3 15:45:17 2006 From: roar.pettersen at uib.no (Roar Pettersen) Date: Mon Jul 3 14:45:22 2006 Subject: [Nav-users] Editdb error In-Reply-To: <8A65B72C71E7484FBE1862045AAC5A8FB73D20(a)embla.ansatt.hint.no> References: <8A65B72C71E7484FBE1862045AAC5A8FB73D20(a)embla.ansatt.hint.no> Message-ID: <Pine.SOC.4.64.0607031442450.1934(a)alf.uib.no> Hello ! > Can anyone tell me how to solve this problem? I had exacly the same problem. :-) You have a missmatch in the pysnmp library when you downgraded from pysnmp-3.3.5 to 2.0.8. My solution was to delete /usr/local/lib/python2.4/site-packages/pysnmp/ and install the pysnmp-2.0.8 again. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From morten.vold at uninett.no Mon Jul 3 15:51:23 2006 From: morten.vold at uninett.no (Morten Vold) Date: Mon Jul 3 14:51:33 2006 Subject: [Nav-users] Announcement: NAV 3.1.0 is out In-Reply-To: <b4c110fd0607030526s6ad2e098pacb80842a69cbed0(a)mail.gmail.com> References: <8EEE7738AEDF6947B3E5508A0244D1C2A36A31(a)stam.himolde.no> <44A8D9E2.6070700(a)uninett.no> <b4c110fd0607030526s6ad2e098pacb80842a69cbed0(a)mail.gmail.com> Message-ID: <44A912CB.1050904(a)uninett.no> Kristian Eide wrote: > NAV really needs to get a proper version system for its schema > changes or it will be very hard to manage such changes in any > reasonable way (manually creating sql patch scripts is not the way to > go). Interesting observation, Kristian, but your advice isn't very helpful without any examples or concrete ideas. What, in your opinion, is a "proper version system for schema changes"? My take on this is that schema changes are relatively few and far apart in NAV today. Therefore I don't see the need to invest a lot of time into devising some elaborate system to avoid having to manually write sql patch scripts. My suggestions is rather to implement a project policy to commit patch scripts along with any schema alterations. That way, a poor release coordinator (me) won't have to piece together every schema change that took place since the last release, and produce a whopping mishmash of hopefully consistent SQL upgrade statements on each release. Also, this should solve the problem for the few who might be using bleeding edge code from trunk at all times. They might not all be SQL wizards, able to analyze the changes and whip up their own SQL statements to change the schema, but each revision that updates the schema will come with an up-to-date upgrade script. We've never claimed that tracking the development trunk should be a piece-of-cake, though. -- mvh Morten Vold UNINETT

1 0

Switchport
by odd.hauge＠hiMolde.no 03 Jul '06

03 Jul '06

Hi. I still have above 160' switch ports. HP switches not running VTP have above 60' switch ports. I also have a location in another city (Kristiansund) with another VTP. Every vlan defined in the main location (Molde) are reported on the switches in Kristiansund, even if they are not defined in Kristiansund. VLAN information is missing for ports on some switches in the sw-port report. I have tried the "netbox.uptodate field to false" and remove/add the switch without any success. I have several other identically switches without this "problem" running the same catos version. How can I debug this? - odd arne > -----Original Message----- > From: Kristian Eide [mailto:kreide@gmail.com] > Sent: Tuesday, April 04, 2006 10:05 AM > To: Hauge Odd Arne > Cc: nav-users(a)itea.ntnu.no > Subject: Re: [Nav-users] Machine tracker > > And Nav still reports that I have above 200 000 > switchports. Vlan defined in one location are shown in the > report for every location, regardless if the vlans are > active/defined or not on all switches in every location. > > I believe this is caused by a bug in the code which tries to > determine the extend of private (i.e. vlans without a router) > networks. > Unfortunately this code was not tested well enough and it > really should be disabled for now. I hope Morten can help > take care of this when he returns. > > -- > Kristian >

1 0

Tags shown instead of the page
by sommerjobb＠froisland.no 03 Jul '06

03 Jul '06

> What version of NAV are you running? This was fixed in NAV 3.0.1. > You are right I installed 3.0.0, just followed one of the red hat install guides on the wiki using a rpm for 3.0.0. Now I'm trying to install either 3.0.1 og 3.1.0, but get the same error when running make. The ./configure par works nicely, runing make I get: [marius@room nav-3.1.0]$ make make[1]: Entering directory `/home/marius/nav-3.1.0/src' Building Util ... (cd Util && ) && touch Util /bin/sh: -c: line 0: syntax error near unexpected token `)' /bin/sh: -c: line 0: `(cd Util && ) && touch Util' make[1]: *** [Util] Error 2 make[1]: Leaving directory `/home/marius/nav-3.1.0/src' make: *** [all] Error 1 Marius

1 0

Announcement: NAV 3.1.0 is out
by roar.pettersen＠uib.no 03 Jul '06

03 Jul '06

Hi ! Trying to create the database from scrath : psql:/usr/local/nav/doc/sql/manage.sql:3: ERROR: table "mem" does not exist psql:/usr/local/nav/doc/sql/manage.sql:4: ERROR: table "swportblocked" does not exist psql:/usr/local/nav/doc/sql/manage.sql:5: ERROR: table "swportallowedvlan" does not exist psql:/usr/local/nav/doc/sql/manage.sql:6: ERROR: table "swportvlan" does not exist psql:/usr/local/nav/doc/sql/manage.sql:7: ERROR: table "gwport" does not exist psql:/usr/local/nav/doc/sql/manage.sql:8: ERROR: table "vlan" does not exist psql:/usr/local/nav/doc/sql/manage.sql:9: ERROR: table "prefix" does not exist psql:/usr/local/nav/doc/sql/manage.sql:10: ERROR: table "gwportprefix" does not exist psql:/usr/local/nav/doc/sql/manage.sql:11: ERROR: table "swport" does not exist psql:/usr/local/nav/doc/sql/manage.sql:12: ERROR: table "module" does not exist psql:/usr/local/nav/doc/sql/manage.sql:13: ERROR: table "netboxcategory" does not exist psql:/usr/local/nav/doc/sql/manage.sql:14: ERROR: table "netboxinfo" does not exist psql:/usr/local/nav/doc/sql/manage.sql:15: ERROR: table "netbox" does not exist psql:/usr/local/nav/doc/sql/manage.sql:16: ERROR: table "emotd" does not exist psql:/usr/local/nav/doc/sql/manage.sql:17: ERROR: table "maintenance" does not exist psql:/usr/local/nav/doc/sql/manage.sql:18: ERROR: table "emotd_related" does not exist psql:/usr/local/nav/doc/sql/manage.sql:19: ERROR: table "cat" does not exist psql:/usr/local/nav/doc/sql/manage.sql:20: ERROR: table "device" does not exist psql:/usr/local/nav/doc/sql/manage.sql:21: ERROR: table "product" does not exist psql:/usr/local/nav/doc/sql/manage.sql:22: ERROR: table "vendor" does not exist psql:/usr/local/nav/doc/sql/manage.sql:23: ERROR: table "type" does not exist psql:/usr/local/nav/doc/sql/manage.sql:24: ERROR: table "snmpoid" does not exist psql:/usr/local/nav/doc/sql/manage.sql:25: ERROR: table "typegroup" does not exist psql:/usr/local/nav/doc/sql/manage.sql:26: ERROR: table "room" does not exist psql:/usr/local/nav/doc/sql/manage.sql:27: ERROR: table "location" does not exist psql:/usr/local/nav/doc/sql/manage.sql:28: ERROR: table "usage" does not exist psql:/usr/local/nav/doc/sql/manage.sql:29: ERROR: table "org" does not exist psql:/usr/local/nav/doc/sql/manage.sql:30: ERROR: table "port2off" does not exist psql:/usr/local/nav/doc/sql/manage.sql:32: ERROR: table "swp_netbox" does not exist psql:/usr/local/nav/doc/sql/manage.sql:33: ERROR: table "alertengine" does not exist psql:/usr/local/nav/doc/sql/manage.sql:36: ERROR: table "vp_netbox_xy" does not exist psql:/usr/local/nav/doc/sql/manage.sql:37: ERROR: table "vp_netbox_grp" does not exist psql:/usr/local/nav/doc/sql/manage.sql:38: ERROR: table "vp_netbox_grp_info" does not exist psql:/usr/local/nav/doc/sql/manage.sql:41: ERROR: sequence "netbox_netboxid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:42: ERROR: sequence "gwport_gwportid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:43: ERROR: sequence "prefix_prefixid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:44: ERROR: sequence "type_typeid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:45: ERROR: sequence "swport_swportid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:46: ERROR: sequence "swp_netbox_swp_netboxid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:47: ERROR: sequence "device_deviceid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:48: ERROR: sequence "product_productid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:49: ERROR: sequence "module_moduleid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:50: ERROR: sequence "mem_memid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:51: ERROR: sequence "emotd_emotdid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:52: ERROR: sequence "maintenance_maintenanceid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:55: ERROR: sequence "vp_netbox_grp_vp_netbox_grp_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:56: ERROR: sequence "vp_netbox_xy_vp_netbox_xyid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:60: ERROR: table "status" does not exist psql:/usr/local/nav/doc/sql/manage.sql:61: ERROR: sequence "status_statusid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:72: NOTICE: CREATE TABLE will create implicit sequence "status_statusid_seq" for serial column "status.statusid" psql:/usr/local/nav/doc/sql/manage.sql:72: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "status_pkey" for table "status" CREATE TABLE psql:/usr/local/nav/doc/sql/manage.sql:83: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "org_pkey" for table "org" CREATE TABLE psql:/usr/local/nav/doc/sql/manage.sql:89: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "usage_pkey" for table "usage" CREATE TABLE psql:/usr/local/nav/doc/sql/manage.sql:95: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "location_pkey" for table "location" CREATE TABLE psql:/usr/local/nav/doc/sql/manage.sql:105: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "room_pkey" for table "room" CREATE TABLE psql:/usr/local/nav/doc/sql/manage.sql:111: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "nettype_pkey" for table "nettype" CREATE TABLE psql:/usr/local/nav/doc/sql/manage.sql:432: ERROR: table "arp" does not exist psql:/usr/local/nav/doc/sql/manage.sql:433: ERROR: table "cam" does not exist psql:/usr/local/nav/doc/sql/manage.sql:434: ERROR: view "netboxmac" does not exist psql:/usr/local/nav/doc/sql/manage.sql:435: ERROR: view "prefix_active_ip_cnt" does not exist psql:/usr/local/nav/doc/sql/manage.sql:436: ERROR: view "prefix_max_ip_cnt" does not exist psql:/usr/local/nav/doc/sql/manage.sql:437: ERROR: view "prefixreport" does not exist psql:/usr/local/nav/doc/sql/manage.sql:438: ERROR: view "netboxreport" does not exist psql:/usr/local/nav/doc/sql/manage.sql:439: ERROR: view "allowedvlan_both" does not exist psql:/usr/local/nav/doc/sql/manage.sql:440: ERROR: view "allowedvlan" does not exist psql:/usr/local/nav/doc/sql/manage.sql:441: ERROR: table "eventtype" does not exist psql:/usr/local/nav/doc/sql/manage.sql:442: ERROR: table "range" does not exist psql:/usr/local/nav/doc/sql/manage.sql:444: ERROR: sequence "arp_arpid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:445: ERROR: sequence "cam_camid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:447: ERROR: function netboxid_null_upd_end_time() does not exist psql:/usr/local/nav/doc/sql/manage.sql:619: ERROR: table "subsystem" does not exist psql:/usr/local/nav/doc/sql/manage.sql:620: ERROR: table "rrd_file" does not exist psql:/usr/local/nav/doc/sql/manage.sql:621: ERROR: table "rrd_datasource" does not exist psql:/usr/local/nav/doc/sql/manage.sql:623: ERROR: sequence "rrd_file_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:624: ERROR: sequence "rrd_datasource_seq" does not exis psql:/usr/local/nav/doc/sql/manage.sql:719: ERROR: table "eventq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:720: ERROR: sequence "eventq_eventqid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:721: ERROR: table "eventqvar" does not exist psql:/usr/local/nav/doc/sql/manage.sql:748: ERROR: table "alertq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:749: ERROR: sequence "alertq_alertqid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:750: ERROR: table "alertqmsg" does not exist psql:/usr/local/nav/doc/sql/manage.sql:841: ERROR: table "alerthist" does not exist psql:/usr/local/nav/doc/sql/manage.sql:842: ERROR: sequence "alerthist_alerthistid_seq" does not exist psql:/usr/local/nav/doc/sql/manage.sql:843: ERROR: table "alerthistmsg" does not exist psql:/usr/local/nav/doc/sql/manage.sql:844: ERROR: table "alerthistvar" does not exist psql:/usr/local/nav/doc/sql/manage.sql:941: ERROR: table "service" does not exist psql:/usr/local/nav/doc/sql/manage.sql:942: ERROR: table "serviceproperty" does not exist psql:/usr/local/nav/doc/sql/manage.sql:943: ERROR: sequence "service_serviceid_seq" does not exist Have tried with postgresql 7.4/8.0 and 8.1, same error messages each time. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From morten.vold at uninett.no Mon Jul 3 11:41:11 2006 From: morten.vold at uninett.no (Morten Vold) Date: Mon Jul 3 10:41:19 2006 Subject: [Nav-users] please help me In-Reply-To: <20060630014922.55933.qmail(a)web15907.mail.cnb.yahoo.com> References: <20060630014922.55933.qmail(a)web15907.mail.cnb.yahoo.com> Message-ID: <44A8D827.3080408(a)uninett.no> wenjun peng wrote: > the system shows: ImportError: cannot import psycopgmodule.so, the > request denied this made me go mad, I got so puzzled with it, I > thought maybe because I' m using psycopg2 instead of psycopg1, then > each time when this problem occured, I add this sentence into the > file: from psycopg2 import psycopg1 as psycopg Then the problem > solved. According to http://www.initd.org/tracker/psycopg/wiki/Migration, psycopg2 is not entirely backwards compatible with psycopg1. I cannot guarantee that NAV doesn't use features of psycopg1 that have changed in psycopg2, so I would say that you need to use psycopg1 only. > Now I can see webpages, but when I want to login as a user > named 'admin' , and using the ' admin ' as the password , the system > said no such name segment named 'admin' . "No such name segment"? Are you sure that's the exact error message you received, it sounds pretty fishy to me.. The default password of the admin user is 'admin', if that doesn't work for you, the problem is elsewhere. What do you see if you use psql to connect to the navprofiles database and issue the following SQL query: SELECT * FROM account WHERE login='admin'; You should see the account details for the admin account - the default password created at installation time will be visible in plaintext until you change it from the web interface. -- mvh Morten Vold UNINETT

1 0

psycopg2?
by wj_peng24＠yahoo.com.cn 03 Jul '06

03 Jul '06

I have installed the nav-3.0.1, instead of using psycopg1.x, I use psycopg2.0, in some configure files , it is written like this: import psycopg. then ,when I open the index page, it would say : No module named psycopg. if I change it to : from psycopg2 import psycopg1 as psycopg. then the problem will be fixed. I don't know wether it would effect the nav going well? Or the nav can only run under psycopg1? __________________________________________________ žÏ¿ì×¢²áÑÅ»¢³¬ŽóÈÝÁ¿Ãâ·ÑÓÊÏä? http://cn.mail.yahoo.comFrom odd.hauge at hiMolde.no Mon Jul 3 11:08:19 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Mon Jul 3 10:09:36 2006 Subject: [Nav-users] Announcement: NAV 3.1.0 is out Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C2A36A31(a)stam.himolde.no> Hi. I get som error messages from the 3.1.0.sql script. See below. - odd arne hauge Changing manage schema psql:3.1.0.sql:27: ERROR: column "defaultfreq" of relation "snmpoid" already exists psql:3.1.0.sql:32: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:33: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:34: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:35: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:36: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:37: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:38: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:39: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:40: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:41: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:42: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:43: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:44: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:51: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:56: ERROR: current transaction is aborted, commands ignored until end of transaction block Adding devBrowse as a subsystem to the event system psql:3.1.0.sql:59: ERROR: current transaction is aborted, commands ignored until end of transaction block Updating existing equipment types in your database psql:3.1.0.sql:62: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:63: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:64: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:65: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:66: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:67: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:68: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:69: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:70: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:71: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:72: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:73: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:74: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:75: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:76: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:77: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:78: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:79: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:80: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:81: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:82: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:83: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:84: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:85: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:86: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:87: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:88: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:89: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:90: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:91: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:92: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:93: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:94: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:95: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:96: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:97: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:98: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:99: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:100: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:101: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:102: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:103: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:104: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:105: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:106: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:107: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:108: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:109: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:110: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:111: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:112: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:113: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:114: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:115: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:116: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:117: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:118: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:119: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:120: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:121: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:122: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:123: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:124: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:125: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:126: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:127: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:128: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:129: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:130: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:131: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:132: ERROR: current transaction is aborted, commands ignored until end of transaction block psql:3.1.0.sql:133: ERROR: current transaction is aborted, commands ignored until end of transaction block Don't forget to run types.sql and snmpoid.sql to insert new vendors, types and snmp OIDs into your database ROLLBACK Granting rights to navread and navwrite for new tables. If you're running a setup without these users, you can safely ignore errors about their non-existance. nav_grant ----------- 97 (1 row) nav_grant ----------- 97 (1 row) You are now connected to database "navprofiles". BEGIN Adding new system account groups to the navprofiles database psql:3.1.0.sql:146: ERROR: duplicate key violates unique constraint "accountgroup_pk" ROLLBACK > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Morten Vold > Sent: Friday, June 30, 2006 4:15 PM > To: nav-users(a)itea.ntnu.no > Subject: [Nav-users] Announcement: NAV 3.1.0 is out > > NAV 3.1.0 is now available for download at SourceForge, see > http://sourceforge.net/projects/nav :-) > > Binary packages for Debian will be available at a later time. > The Debian package is maintained by Morten Werner Olsen. We > would also like someone to maintain the unofficial RPM > package, do we have any volunteers? > > This is mainly a feature release, we are still working on a > number of known bugs. We hope to see a 3.1.1 bugfix release > within a couple of months, and we've scheduled a 3.2 release > for October. > > I apologize to anyone who has not had their questions > answered these past couple of weeks - we've been very busy > preparing and attending this years's UNINETT conference, > which was held at ?lesund University College last week > (http://www.hials.no/uninett2006). Preparing this release > also took some time. I'll be answering any dangling requests > on the list just over the weekend. > > > > > -- > mvh > Morten Vold > UNINETT > > >

1 0

Announcement: NAV 3.1.0 is out
by morten.vold＠uninett.no 30 Jun '06

30 Jun '06

Skipped content of type multipart/mixed

1 0

please help me
by wj_peng24＠yahoo.com.cn 30 Jun '06

30 Jun '06

hello everyone, About 2 or 3 weeks ago, I wrote some letters , because I have got some problems about the web interface, and I found that I cannot login to the web, first, even the webpage cannot be shown in the browser, it shows the problem like this: No module named ..., but , in this root , I can find this module straightly, I don't understand why the system said like that, then I wrote a letter to the nav-user, but no one answer me. After a few days with no letter come , I did fix the problem, a new one coming, this time, the system shows: ImportError: cannot import psycopgmodule.so, the request denied this made me go mad, I got so puzzled with it, I thought maybe because I' m using psycopg2 instead of psycopg1, then each time when this problem occured, I add this sentence into the file: from psycopg2 import psycopg1 as psycopg Then the problem solved. Now I can see webpages, but when I want to login as a user named 'admin' , and using the ' admin ' as the password , the system said no such name segment named 'admin' . If I can't use ' admin ' as user, which usrname can I use? also the password? By the way, my OS is ferdora Core4 , and postgresql is 8.0.3, the Version of Nav is 3.0.1, version of Python is 2.4, Version of mod_python is 3.2.7, Version of psycopg is 2.0.2. Anything else you want to know about my OS if you can help me , please write to me. Can anyone who can help me please? --------------------------------- Mp3·è¿ñËÑ-ÐÂžèÈÈžèžßËÙÏÂ From sommerjobb at froisland.no Fri Jun 30 12:13:00 2006 From: sommerjobb at froisland.no (Marius =?iso-8859-1?Q?Fr=F8island?=) Date: Fri Jun 30 11:13:26 2006 Subject: [Nav-users] Tags shown instead of the page Message-ID: <WorldClient-F200606301113.AA13000040(a)froisland.no> I'v just installed nav on fedora 5, I follow the REHL4 installation guide, and everything work nicely. I'm able to start the server, status show that everything is running fine. the front page is displayed ok, but opening the login page in my browser I get the HTML code instead of the page. FRom the HTLM code it seems that HTML tag is missing. Should this have been parsed though something? Any idea of what is miss configured? This is the HTML tags as they are shown in the browser when I open the login page: <body onLoad="document.getElementById('username').focus();"> <table height=40% border=0 width=100%><tr valign=middle><td valign=middle align=center> <br><br><br> <font face=verdana size=1> <form method="POST" action="/index/login"> <img src="/images/login/navlogo.gif"><br> <br><font color=#FF0000>You are not authorized to access<br>/status/</font> <br><input id="username" type="text" name="login" style="border: 1px solid #99c;"><br><font color=#6699CC>username</font> <br><input type="password" name="password" style="border: 1px solid #99c;"><br><font color=#6699CC>password</font> <input type="hidden" name="origin" value="/status/"> <br><br><input type="submit" value="Log in"> </form> </font> </td></tr></table> </body>

1 0

The web problem
by wj_peng24＠yahoo.com.cn 22 Jun '06

22 Jun '06

hello everyone, This is Patrick here, when I start the nav, and I need to login to the web interface which webroot is :"/usr/local/nav/apache/webroot", but the web shows : Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 48, in headerparserhandler File "/usr/local/nav/lib/python/nav/web/auth.py", line 32, in ? File "/usr/local/nav/lib/python/nav/db/__init__.py", line 29, in ? import psycopg ImportError: /usr/lib/python2.4/site-packages/psycopgmodule.so: failed to map segment from shared object: Permission denied Can anyone who can help me get out of this problem please? --------------------------------- ÇÀ×¢ÑÅ»¢Ãâ·ÑÓÊÏä-3.5GÈÝÁ¿£¬20MžœŒþ£¡ From wj_peng24 at yahoo.com.cn Fri Jun 23 11:20:20 2006 From: wj_peng24 at yahoo.com.cn (wenjun peng) Date: Fri Jun 23 04:20:30 2006 Subject: [Nav-users] quesstion about the web interface Message-ID: <20060623022020.96085.qmail(a)web15905.mail.cnb.yahoo.com> hello, I am using Nav-3.0.1, and I installed both psycopg-1.1.21and psycopg2-2.0b8, when I start nav, it works , everything seems ok, but the web interface dosen't work, it shows the following thing as blew: Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 48, in headerparserhandler File "/usr/local/nav/lib/python/nav/web/auth.py", line 32, in ? File "/usr/local/nav/lib/python/nav/db/__init__.py", line 29, in ? import psycopg ImportError: /usr/lib/python2.4/site-packages/psycopgmodule.so: failed to map segment from shared object: Permission denied Is there any problem with the psycopg? Or there is other problems? This problem puzzled me for already 3 weeks, can anyone who can help me ? from Patrick 23rd Jun 2006 --------------------------------- Mp3·è¿ñËÑ-ÐÂžèÈÈžèžßËÙÏÂ From SLander at hearstsc.com Tue Jun 27 17:06:31 2006 From: SLander at hearstsc.com (SLander(a)hearstsc.com) Date: Tue Jun 27 22:02:31 2006 Subject: [Nav-users] Translate a log file? In-Reply-To: <20060622031019.19020.qmail(a)web15906.mail.cnb.yahoo.com> Message-ID: <OF16D0584B.FB5F02C2-ON8525719A.006D6B7D-8525719A.006E13C6(a)hearstsc.com> Could anyone translate these warnings to English? I am not sure what they are telling me. This is from the networkDiscovery-topology.html file Generated on: Tue Jun 27 14:35:03 EDT 2006 ---->[WARNING]: Boks(8): Floor28-6513-1, mer enn en link til boks(31) floor28-3750-4.home.com, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(8): Floor28-6513-1, mer enn en link til boks(20) floor28-3.home.com, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(8): Floor28-6513-1, mer enn en link til boks(20) floor28-3.home.com, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(8): Floor28-6513-1, mer enn en link til boks(52) sc-bw-gw.home.com, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(9): Floor28-6513-2, mer enn en link til boks(20) floor28-3.home.com, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(9): Floor28-6513-2, mer enn en link til boks(20) floor28-3.home.com, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(28): floor28srv-3.home.com, mer enn en link til boks(59) WDSU-UU-GW, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(95): STAE-CORE-SW1, mer enn en link til boks(93) STAE-NEWS-SW1, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(95): STAE-CORE-SW1, mer enn en link til boks(97) STAE-TRAFFIC-SW1, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(95): STAE-CORE-SW1, mer enn en link til boks(93) STAE-NEWS-SW1, uten at vi vet mp i andre enden. ---->[WARNING]: Boks(95): STAE-CORE-SW1, mer enn en link til boks(97) STAE-TRAFFIC-SW1, uten at vi vet mp i andre enden. [WARNING] Conflicting boksbak in mp vs. mpBoksbak for Boks(9): Floor28-6513-2 Mp: 253 bmp: BoksMpBak [boksbak=8, toIfindex=null], bmpA: BoksMpBak [boksbak=38, toIfindex=51] [WARNING] Conflicting boksbak in mp vs. mpBoksbak for Boks(20): floor28-3.home.com Mp: 50 bmp: BoksMpBak [boksbak=8, toIfindex=84], bmpA: BoksMpBak [boksbak=9, toIfindex=71] [WARNING] Conflicting boksbak in mp vs. mpBoksbak for Boks(33): floor29-2.home.com Mp: 50 bmp: BoksMpBak [boksbak=8, toIfindex=37], bmpA: BoksMpBak [boksbak=9, toIfindex=53] [WARNING] Conflicting boksbak in mp vs. mpBoksbak for Boks(38): hsc30-2.home.com Mp: 50 bmp: BoksMpBak [boksbak=8, toIfindex=null], bmpA: BoksMpBak [boksbak=9, toIfindex=40] [Guess] Boks(8): Floor28-6513-1 Mp: 74 Boksbak(31): floor28-3750-4.home.com [Guess] Boks(8): Floor28-6513-1 Mp: 266 Boksbak(31): floor28-3750-4.home.com Also, still having a problem with viewing rrd files from within report, where the URL is something like: http://navhost/browse/rrd/datasources?id=7099& I get back a blank screen. I have found that a file is created in /tmp - the above created a file /tmp/rrd_764614789.gif. But - it appears NAV is not associating the file rrd_764614789.gif with the id 7099 in the above URL.. Also, in the apache error log there will be an error: [Tue Jun 27 15:53:55 2006] [notice] child pid 14045 exit signal Segmentation fault (11) Can anyone point me in a direction to look? I am wondering if this is something as simple as the graph file being generated in /tmp, and what ever displays it expecting the file to be somewhere else? Thanks Scott This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message. >From sommerjobb at froisland.no Thu Jun 29 10:05:52 2006 From: sommerjobb at froisland.no (Marius =?iso-8859-1?Q?Fr=F8island?=) Date: Thu Jun 29 09:08:37 2006 Subject: [Nav-users] Could not connect to servlet in network explorer Message-ID: <WorldClient-F200606290905.AA05520037(a)froisland.no> Opening network explorer I get the following error, I just installed the software and am at a loss for what is wrong with my installation. Current path: Home > Network explorer Could not connect to servlet Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/nav/web/pyproxy/proxy.py", line 61, in handler user=user, session=req.session.id) File "/usr/lib/python2.3/site-packages/nav/web/pyproxy/proxy.py", line 124, in doRequest request.request(method, path, query, headers) File "/usr/lib/python2.3/httplib.py", line 721, in request self._send_request(method, url, body, headers) File "/usr/lib/python2.3/httplib.py", line 742, in _send_request self.endheaders() File "/usr/lib/python2.3/httplib.py", line 715, in endheaders self._send_output() File "/usr/lib/python2.3/httplib.py", line 600, in _send_output self.send(msg) File "/usr/lib/python2.3/httplib.py", line 567, in send self.connect() File "/usr/lib/python2.3/httplib.py", line 551, in connect raise socket.error, msg error: (111, 'Connection refused')

1 0

questions about the nav
by wj_peng24＠yahoo.com.cn 08 Jun '06

08 Jun '06

dear Sir/Madam, I am Patrick, from China, I don't know wether I should send this mail to you or not? I just want to ask a question about the nav. I download NAV3.0.1 from the website, and I think I have already installed this software in my OS(Fedora core 4). I configured everything ( include the apache ) And I started the httpd, tomcat5, postgresql, after I run " nav start " , everything seems ok, then ,what should I do in the following. I have checked the introduction on the web, it said I should go to the web ,which served by my apache server,to login, named as "admin", and also use the password as "admin" for the first time. Then I got puzzled, I don't understand, when I checked the root: /usr/local/nav/apache/webroot, ( the introduction told me to set the document root of apache to "/usr/local/nav/apache/webroot",and I did it.) but I can't find any webpage in this dirctory, there is only one file named index, and it's full name is index.py, is it supposed to be the NAV frontpage? Please help me to get out of this trouble, and tell me what to do next? Thanks very much. Patrick 8th JUN 2006 __________________________________________________ žÏ¿ì×¢²áÑÅ»¢³¬ŽóÈÝÁ¿Ãâ·ÑÓÊÏä? http://cn.mail.yahoo.comFrom morten.vold at uninett.no Fri Jun 9 11:08:47 2006 From: morten.vold at uninett.no (Morten Vold) Date: Fri Jun 9 10:08:55 2006 Subject: [Nav-users] Bleeding edge In-Reply-To: <8EEE7738AEDF6947B3E5508A0244D1C290E853(a)stam.himolde.no> References: <8EEE7738AEDF6947B3E5508A0244D1C290E853(a)stam.himolde.no> Message-ID: <44892C8F.8060501(a)uninett.no> Hauge Odd Arne wrote: > Following line in db.conf is missing in the latest svn build: > "script_arnold = nav" That's the way of the trunk ;) Fixed now, thanks for noticing! -- mvh Morten Vold UNINETT

1 0

mailin - a NAV contrib
by vidar.faltinsen＠uninett.no 07 Jun '06

07 Jun '06

Hi, We realize that there is a quite well hidden contrib to NAV out there that is worthy a better advertisement. Mailin is implemented by Andreas Solberg at UNINETT; MailIn is a subsystem of NAV, which receives an e-mail at stdin, find an appropriate parser for the current mail, and post an event to the NAV system. The parsers are created using a plugin architecture. Each parser is a class placed in the plugins/ folder, and inherits from EventSystem. Read more on: http://drift.uninett.no/~andreas/mailin/ We will link to this page from metanav soon... - Vidar

1 0

***SPAM*** Cricket compilation error in debian
by gsri11＠yahoo.co.in 06 Jun '06

06 Jun '06

Hi, Thanks for your reply.I am sending the details as follows $gCricketHome = "/usr/share/nav/cricket"; $gInstallRoot = "$gCricketHome/cricket"; #$gConfigRoot = "$gCricketHome/cricket-config"; Best Regards Morten Vold <morten.vold(a)uninett.no> wrote: rajesh wrote: > Edit the cricket-conf.pl and set these variables: > $gCricketHome = "/usr/share/nav/cricket"; > > $ /usr/lib/nav/makecricketconfig.pl > No path to Cricket specified, searching default paths... > Searching in /home/navcron/cricket. > Searching in /usr/local/cricket. > Found cricket in /usr/local/cricket. > Use of uninitialized value in concatenation (.) or string at /usr/lib/nav/makecricketconfig.pl line 82. > Can't locate ConfigTree/Cache.pm in @INC (@INC contains: /lib /etc/perl /usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/lib/nav/makecricketconfig.pl line 84. > BEGIN failed--compilation aborted at /usr/lib/nav/makecricketconfig.pl line 84. > > I am looking forward where i am doing wrong. Rajesh, what are the next few variables after $gCricketHome in your cricket-conf.pl set to? Makecricketconfig is complaining that it cannot find some Cricket libraries, the specific library it can't find should (in your case) be located at /usr/local/cricket/cricket/lib/ConfigTree/Cache.pm -- mvh Morten Vold UNINETT --------------------------------- Yahoo! India Answers: Share what you know. Learn something new Click here Send free SMS to your Friends on Mobile from your Yahoo! Messenger Download now >From SLander at hearstsc.com Tue Jun 6 18:01:46 2006 From: SLander at hearstsc.com (SLander(a)hearstsc.com) Date: Tue Jun 6 22:58:05 2006 Subject: [Nav-users] Trouble with Scope In-Reply-To: <OFA6A1AC20.C23003E0-ON85257184.005E0BEE-85257184.00627BF6@LocalDomain> Message-ID: <OFAA55B1D8.37132614-ON85257185.00730A26-85257185.00732B26(a)hearstsc.com> When I try to view scope (reports -> IP Address scope - Graphical View) I get: Mod_python error: "PythonHandler reporthandler" Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/report/reporthandler.py", line 122, in handler matrix = Matrix(databasescopes[0][0]) File "/usr/lib/python2.4/site-packages/Numeric/Matrix.py", line 69, in __init__ data = _convert_from_string(data) File "/usr/lib/python2.4/site-packages/Numeric/Matrix.py", line 36, in _convert_from_string newrow.extend(map(_eval,temp)) File "/usr/lib/python2.4/site-packages/Numeric/Matrix.py", line 24, in _eval return eval(astr.translate(_table,_todelete)) File "", line 1 10.152.36.024 ^ SyntaxError: invalid syntax I think it is stumbling on readding the cidr address (10.152.36.0/24), but, I can't not add the /xx as that gets added automatically when adding a prefix. What am I doing wrong? Other then that, and that I can't yet display the traffic map (starts java and hangs my browser! - Only way to clear it is to kill the browser via taskman) I now hav NAV running on Suse 10.0. So far, so good. Thanks all This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message. >From wj_peng24 at yahoo.com.cn Wed Jun 7 11:21:32 2006 From: wj_peng24 at yahoo.com.cn (wj_peng24(a)yahoo.com.cn) Date: Wed Jun 7 10:22:11 2006 Subject: [Nav-users] (Saksnummer:319759) questions about the NAV Message-ID: <20060607060901.24726.qmail(a)web15903.mail.cnb.yahoo.com> Videresendt til nav-users(a)itea.ntnu.no ----------------------------------------------- 2006-06-07 08:10:06: wenjun peng dear Sir/Madam, I am Patrick, from China, I download NAV3.0.1 from the website, and I think I have already installed this software in my OS(Fedora core4). I configured everything( include the apache) And I started the httpd, tomcat5, postgresql, after I run " nav start ", everything seems ok, then ,what should I do in the following. I have checked the introduction on the web, it said I should go to the web ,which served by my apache server,to login, named as "admin", and also use the password of "admin" for the first time. Then I got puzzled, I don't understand, when I checked the root: /usr/local/nav/apache/webroot,( the introduction told me to set the document root of apache to "/usr/local/nav/apache/webroot",and I did it.) but I can't find any webpage in this dirctory, there is only one file named index, and it's full name is index.py, and there is another file named usradmin.py, others are all directories, what wrong with the frontpage? Please help me to get out of this trouble, and tell me what to do next? where should I login in the webpage? Thanks very much. Patrick 7th JUN 2006 __________________________________________________ ????????????????????????????? http://cn.mail.yahoo.com -----------------------------------------------

1 0

problem(s) installing nav-3.0.1
by SLander＠hearstsc.com 01 Jun '06

01 Jun '06

Hello, first - I don't know java. So, I apologize if this is really basic. I am trying to install Nav-3.0.1 from the source on Suse 10.0. I have been using the Sles 9 instruction for a guide for required packages. That led me to my first error - I suspect these two errors are related Error 1: This isn't really an error, but a lack of knowledge on my part, I guess. The instructions say: # The WestHawk Java SNMP library has been replaced by the library found at # http://gicl.cs.drexel.edu/people/sevy/snmp/ # Must be compiled from source wget http://gicl.cs.drexel.edu/people/sevy/snmp/source_1.4.zip ---->>>>> # Follow the build instructions in the archive, you should have JavaSnmp.jar in the end: cp JavaSnmp.jar $JAVA_HOME/jre/lib/ext/ Well, I can't find anything anywhere about how to create JavaSnmp.jar. So - do I just do something like jar -cvf $JAVA_HOME/jre/lib/ext/JavaSnmp.jar from the source/snmp dir? Error 2: While attempting to run make from within nav-3.0.1 install directory I get the following: Building SimpleSnmp ... (cd SimpleSnmp && /usr/bin/ant ) && touch SimpleSnmp Buildfile: build.xml init: compile: [javac] Compiling 3 source files to /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/build [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:36: package snmp does not exist [javac] import snmp.*; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:70: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] private SNMPv1CommunicationInterface comInterface = null; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:598: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPVarBindList var = null; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:605: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] var = new SNMPVarBindList(); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:608: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPVarBindList nextpair = comInterface.getNextMIBEntry(nextoid); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:609: cannot resolve symbol [javac] symbol : class SNMPObject [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObject snmpobj = nextpair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:610: cannot resolve symbol [javac] symbol : class SNMPNull [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (snmpobj instanceof SNMPNull) break; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:611: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)snmpobj; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:611: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)snmpobj; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:612: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObject At(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:612: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObject At(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:623: cannot resolve symbol [javac] symbol : class SNMPBadValueException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] } catch (SNMPBadValueException exp) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:626: cannot resolve symbol [javac] symbol : class SNMPException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] } catch (SNMPException exp) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:627: cannot resolve symbol [javac] symbol : class SNMPGetException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (!(exp instanceof SNMPGetException && exp.getMessage() != null && exp.getMessage().indexOf(" not available for retrieval") >= 0)) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:651: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)(var.getSNMPObjectAt(i)); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:651: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)(var.getSNMPObjectAt(i)); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:652: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:652: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:653: cannot resolve symbol [javac] symbol : class SNMPObject [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObject snmpValue = pair.getSNMPObjectAt(1); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:657: cannot resolve symbol [javac] symbol : class SNMPOctetString [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (!decodeHex && snmpValue instanceof SNMPOctetString) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:663: cannot resolve symbol [javac] symbol : class SNMPOctetString [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (data.length() == 0 && !(snmpValue instanceof SNMPOctetString)) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:806: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] comInterface = new SNMPv1CommunicationInterface(snmpVersion, hostAddress, cs_ro); [javac] ^ [javac] 22 errors BUILD FAILED /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/build.xml:30: Compile failed; see the compiler error output for details. Any suggestions? Thanks Scott This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message. >From SLander at hearstsc.com Thu Jun 1 18:36:11 2006 From: SLander at hearstsc.com (SLander(a)hearstsc.com) Date: Thu Jun 1 23:32:49 2006 Subject: [Nav-users] problem(s) installing nav-3.0.1, updated Message-ID: <OF709F304D.D0C86F82-ON85257180.00766F93-85257180.007654DF(a)hearstsc.com> By reading the RedHat install directions, I have make it further, and, now have the things at least partially running.... I never made it past error #2 below, but side stepped it by installing the RPM. So - If anyone has any suggestions for fixing that, I would like to continue that path also. System details: Suse 10.0 Postgres 8.1.3 Nav-3.0.0-1, installed from the noarch rpm, using nodep (had to use nodep because it wanted postgres 7.x) When adding a new device, I get this database error. I hope someone can help? Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 524, in editPage listView.fill(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 798, in fill tooltipDef[2] = executeSQLreturn(sql) File "/usr/local/nav/apache/webroot/editdb/editdbSQL.py", line 45, in executeSQLreturn database.execute(sql) ProgrammingError: ERROR: missing FROM-clause entry for table "netboxcategory" SELECT netboxid,netboxcategory.category FROM netbox WHERE netboxcategory.netboxid=netboxid Hello, first - I don't know java. So, I apologize if this is really basic. I am trying to install Nav-3.0.1 from the source on Suse 10.0. I have been using the Sles 9 instruction for a guide for required packages. That led me to my first error - I suspect these two errors are related Error 1: This isn't really an error, but a lack of knowledge on my part, I guess. The instructions say: # The WestHawk Java SNMP library has been replaced by the library found at # http://gicl.cs.drexel.edu/people/sevy/snmp/ # Must be compiled from source wget http://gicl.cs.drexel.edu/people/sevy/snmp/source_1.4.zip ---->>>>> # Follow the build instructions in the archive, you should have JavaSnmp.jar in the end: cp JavaSnmp.jar $JAVA_HOME/jre/lib/ext/ Well, I can't find anything anywhere about how to create JavaSnmp.jar. So - do I just do something like jar -cvf $JAVA_HOME/jre/lib/ext/JavaSnmp.jar from the source/snmp dir? Error 2: While attempting to run make from within nav-3.0.1 install directory I get the following: Building SimpleSnmp ... (cd SimpleSnmp && /usr/bin/ant ) && touch SimpleSnmp Buildfile: build.xml init: compile: [javac] Compiling 3 source files to /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/build [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:36: package snmp does not exist [javac] import snmp.*; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:70: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] private SNMPv1CommunicationInterface comInterface = null; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:598: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPVarBindList var = null; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:605: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] var = new SNMPVarBindList(); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:608: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPVarBindList nextpair = comInterface.getNextMIBEntry(nextoid); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:609: cannot resolve symbol [javac] symbol : class SNMPObject [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObject snmpobj = nextpair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:610: cannot resolve symbol [javac] symbol : class SNMPNull [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (snmpobj instanceof SNMPNull) break; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:611: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)snmpobj; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:611: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)snmpobj; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:612: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObject At(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:612: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObject At(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:623: cannot resolve symbol [javac] symbol : class SNMPBadValueException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] } catch (SNMPBadValueException exp) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:626: cannot resolve symbol [javac] symbol : class SNMPException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] } catch (SNMPException exp) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:627: cannot resolve symbol [javac] symbol : class SNMPGetException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (!(exp instanceof SNMPGetException && exp.getMessage() != null && exp.getMessage().indexOf(" not available for retrieval") >= 0)) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:651: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)(var.getSNMPObjectAt(i)); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:651: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)(var.getSNMPObjectAt(i)); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:652: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:652: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:653: cannot resolve symbol [javac] symbol : class SNMPObject [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObject snmpValue = pair.getSNMPObjectAt(1); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:657: cannot resolve symbol [javac] symbol : class SNMPOctetString [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (!decodeHex && snmpValue instanceof SNMPOctetString) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:663: cannot resolve symbol [javac] symbol : class SNMPOctetString [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (data.length() == 0 && !(snmpValue instanceof SNMPOctetString)) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:806: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] comInterface = new SNMPv1CommunicationInterface(snmpVersion, hostAddress, cs_ro); [javac] ^ [javac] 22 errors BUILD FAILED /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/build.xml:30: Compile failed; see the compiler error output for details. Any suggestions? Thanks Scott This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message. >From SLander at hearstsc.com Fri Jun 2 14:15:17 2006 From: SLander at hearstsc.com (SLander(a)hearstsc.com) Date: Fri Jun 2 19:11:54 2006 Subject: [Nav-users] problem(s) installing nav-3.0.1, update2 In-Reply-To: <OF709F304D.D0C86F82-ON85257180.00766F93-85257180.007654DF(a)hearstsc.com> Message-ID: <OF5A97A55E.22728088-ON85257181.005E6BE4-85257181.005E721C(a)hearstsc.com> Fixed the below error by modifying lines 1992 to 1994 of editdb.py to be: subcatTooltip = [['SELECT netbox.netboxid,' + \ 'netboxcategory.category FROM netbox, netboxcategory ' + \ 'WHERE netboxcategory.netboxid=netbox.netboxid', The error would occur whenever I went to edit an IP device, or upon finishing adding a device. Scott Still looking for help on this error: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] comInterface = new SNMPv1CommunicationInterface(snmpVersion, hostAddress, cs_ro); [javac] ^ [javac] 22 errors BUILD FAILED /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/build.xml:30: Compile failed; see the compiler error output for details. By reading the RedHat install directions, I have make it further, and, now have the things at least partially running.... I never made it past error #2 below, but side stepped it by installing the RPM. So - If anyone has any suggestions for fixing that, I would like to continue that path also. System details: Suse 10.0 Postgres 8.1.3 Nav-3.0.0-1, installed from the noarch rpm, using nodep (had to use nodep because it wanted postgres 7.x) When adding a new device, I get this database error. I hope someone can help? Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 524, in editPage listView.fill(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 798, in fill tooltipDef[2] = executeSQLreturn(sql) File "/usr/local/nav/apache/webroot/editdb/editdbSQL.py", line 45, in executeSQLreturn database.execute(sql) ProgrammingError: ERROR: missing FROM-clause entry for table "netboxcategory" SELECT netboxid,netboxcategory.category FROM netbox WHERE netboxcategory.netboxid=netboxid Hello, first - I don't know java. So, I apologize if this is really basic. I am trying to install Nav-3.0.1 from the source on Suse 10.0. I have been using the Sles 9 instruction for a guide for required packages. That led me to my first error - I suspect these two errors are related Error 1: This isn't really an error, but a lack of knowledge on my part, I guess. The instructions say: # The WestHawk Java SNMP library has been replaced by the library found at # http://gicl.cs.drexel.edu/people/sevy/snmp/ # Must be compiled from source wget http://gicl.cs.drexel.edu/people/sevy/snmp/source_1.4.zip ---->>>>> # Follow the build instructions in the archive, you should have JavaSnmp.jar in the end: cp JavaSnmp.jar $JAVA_HOME/jre/lib/ext/ Well, I can't find anything anywhere about how to create JavaSnmp.jar. So - do I just do something like jar -cvf $JAVA_HOME/jre/lib/ext/JavaSnmp.jar from the source/snmp dir? Error 2: While attempting to run make from within nav-3.0.1 install directory I get the following: Building SimpleSnmp ... (cd SimpleSnmp && /usr/bin/ant ) && touch SimpleSnmp Buildfile: build.xml init: compile: [javac] Compiling 3 source files to /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/build [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:36: package snmp does not exist [javac] import snmp.*; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:70: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] private SNMPv1CommunicationInterface comInterface = null; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:598: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPVarBindList var = null; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:605: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] var = new SNMPVarBindList(); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:608: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPVarBindList nextpair = comInterface.getNextMIBEntry(nextoid); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:609: cannot resolve symbol [javac] symbol : class SNMPObject [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObject snmpobj = nextpair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:610: cannot resolve symbol [javac] symbol : class SNMPNull [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (snmpobj instanceof SNMPNull) break; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:611: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)snmpobj; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:611: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)snmpobj; [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:612: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObject At(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:612: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObject At(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:623: cannot resolve symbol [javac] symbol : class SNMPBadValueException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] } catch (SNMPBadValueException exp) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:626: cannot resolve symbol [javac] symbol : class SNMPException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] } catch (SNMPException exp) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:627: cannot resolve symbol [javac] symbol : class SNMPGetException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (!(exp instanceof SNMPGetException && exp.getMessage() != null && exp.getMessage().indexOf(" not available for retrieval") >= 0)) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:651: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)(var.getSNMPObjectAt(i)); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:651: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)(var.getSNMPObjectAt(i)); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:652: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:652: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:653: cannot resolve symbol [javac] symbol : class SNMPObject [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObject snmpValue = pair.getSNMPObjectAt(1); [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:657: cannot resolve symbol [javac] symbol : class SNMPOctetString [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (!decodeHex && snmpValue instanceof SNMPOctetString) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:663: cannot resolve symbol [javac] symbol : class SNMPOctetString [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (data.length() == 0 && !(snmpValue instanceof SNMPOctetString)) { [javac] ^ [javac] /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:806: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] comInterface = new SNMPv1CommunicationInterface(snmpVersion, hostAddress, cs_ro); [javac] ^ [javac] 22 errors BUILD FAILED /data/projects/Nav/nav-3.0.1/src/SimpleSnmp/build.xml:30: Compile failed; see the compiler error output for details. Any suggestions? Thanks Scott This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message. _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Service Center (cadmin(a)hearstsc.com) immediately by email and delete the original message. >From morten.vold at uninett.no Mon Jun 5 11:58:10 2006 From: morten.vold at uninett.no (Morten Vold) Date: Mon Jun 5 10:58:19 2006 Subject: [Nav-users] ***SPAM*** Cricket compilation error in debian In-Reply-To: <20060531085935.75368.qmail(a)web8903.mail.in.yahoo.com> References: <20060531085935.75368.qmail(a)web8903.mail.in.yahoo.com> Message-ID: <4483F222.7050300(a)uninett.no> rajesh wrote: > Edit the cricket-conf.pl and set these variables: > $gCricketHome = "/usr/share/nav/cricket"; > > $ /usr/lib/nav/makecricketconfig.pl > No path to Cricket specified, searching default paths... > Searching in /home/navcron/cricket. > Searching in /usr/local/cricket. > Found cricket in /usr/local/cricket. > Use of uninitialized value in concatenation (.) or string at /usr/lib/nav/makecricketconfig.pl line 82. > Can't locate ConfigTree/Cache.pm in @INC (@INC contains: /lib /etc/perl /usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/lib/nav/makecricketconfig.pl line 84. > BEGIN failed--compilation aborted at /usr/lib/nav/makecricketconfig.pl line 84. > > I am looking forward where i am doing wrong. Rajesh, what are the next few variables after $gCricketHome in your cricket-conf.pl set to? Makecricketconfig is complaining that it cannot find some Cricket libraries, the specific library it can't find should (in your case) be located at /usr/local/cricket/cricket/lib/ConfigTree/Cache.pm -- mvh Morten Vold UNINETT

1 0

***SPAM*** Cricket compilation error in debian
by gsri11＠yahoo.co.in 30 Mai '06

30 Mai '06

Hi, I am trying to install nav in debian linux using the http://pkg-nav.alioth.debian.org/install-howto.txt. I am having trouble in compiling cricket When i run the compile as root i am getting the following you have menctioned runas navcron.How do i compile as navcron user /usr/local/cricket/lib# ../compile [30-May-2006 15:09:54 ] Log level changed from warn to info. [30-May-2006 15:09:54 ] Starting compile: Cricket version 1.0.5 (2004-03-28) Can't create /home/cricket/cricket-config/config.db.lock at ../compile line 82. Please help me how to fix these problem. Best Regards --------------------------------- Yahoo! India Answers: Share what you know. Learn something new Click here Send free SMS to your Friends on Mobile from your Yahoo! Messenger Download now >From stein.magnus at jodal.no Wed May 31 00:34:13 2006 From: stein.magnus at jodal.no (Stein Magnus Jodal) Date: Tue May 30 23:34:11 2006 Subject: [Nav-users] Cricket compilation error in debian In-Reply-To: <20060530145717.41447.qmail(a)web8912.mail.in.yahoo.com> References: <20060530145717.41447.qmail(a)web8912.mail.in.yahoo.com> Message-ID: <1149024853.6623.13.camel(a)localhost.localdomain> On Tue, 2006-05-30 at 15:57 +0100, rajesh wrote: > When i run the compile as root i am getting the following you have menctioned > run as navcron. How do i compile as navcron user To possible solutions: To start a shell as the navcron user with su: Run ``su - navcron -c /bin/bash''. You'll be prompted for the navcron user's password if you're not running the command as root. '-c /bin/bash' in case the navcron user does not have a shell. I'm not very into NAV yet :-) To run the commands or a shell as the navcron user with sudo: ``sudo -u postgres ../compile'' or ``sudo -u postgres /bin/bash''. You will need to have sudo rights in /etc/sudoers (do not edit directly, man sudoers) and will be prompted for your own password unless you run sudo as root. PS! You're mail was tagged as spam by the lists recieving server due to your username ending in numbers and your mail beeing originally formatted in HTML. -- Stein Magnus Jodal http://www.jodal.no/ >From stein.magnus at jodal.no Wed May 31 09:58:49 2006 From: stein.magnus at jodal.no (Stein Magnus Jodal) Date: Wed May 31 08:58:53 2006 Subject: [Nav-users] Cricket compilation error in debian In-Reply-To: <1149024853.6623.13.camel(a)localhost.localdomain> References: <20060530145717.41447.qmail(a)web8912.mail.in.yahoo.com> <1149024853.6623.13.camel(a)localhost.localdomain> Message-ID: <1149058729.6623.22.camel(a)localhost.localdomain> On Tue, 2006-05-30 at 23:34 +0200, Stein Magnus Jodal wrote: > To run the commands or a shell as the navcron user with sudo: > ``sudo -u postgres ../compile'' or ``sudo -u postgres /bin/bash''. You > will need to have sudo rights in /etc/sudoers (do not edit directly, man > sudoers) and will be prompted for your own password unless you run sudo > as root. Of course, I meant navcron and not postgres. -- Stein Magnus Jodal http://www.jodal.no/

1 0

E-links in VlanPlot
by rune.kittelsen＠hia.no 24 Mai '06

24 Mai '06

--On Wednesday, May 24, 2006 10:49:47 AM +0200 Kjetil Otter Olsen <kjetil.olsen(a)usit.uio.no> wrote: > > We have a strange problem with external links (e-links) in VlanPlot. > > On the Top-level (with or without Containers), no e-links show up. > > But if I put a router with an e-link in a Container, the e-link shows up > inside the Container, but just inside the Container. > > How can I get the e-links to show on the Top-page of VlanPlot? > They showed up after this: http://metanav.ntnu.no/moin.cgi/TrafficMap ----------------------------------------------- Showing external connections ---------------------------- NAV will detect external connections, elinks, i.e. subnets that are on the perimeter of you network, connecting other customers or other ISPs. These prefixes will have the attribute vlan.nettype='elink'. The network map will not show these external connections on the top level by default. You have to do the following: manage=# UPDATE vp_netbox_grp_info SET hideicons='f' WHERE name='_Top' ; Please note that hiding external connections can only be done on the top level. Within a given container there is no way of hiding external connetions. They will always be shown. ----------------------------------------------- But I can't alter the layout. I think it has to do with the web_access privilieges for vlanPlot|navAdmin because I don't have a Move and Save button (any longer..). What are the correct settings for these? -rune > --Kjetil > > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > -- +----------------------------------------------------------------------+ ! Rune Kittelsen E-post: Rune.Kittelsen(a)hia.no ! ! H?gskolen i Agder, IT-tjenesten Tlf: 47-38 14 17 99 ! ! (Agder University College) Fax: 47-38 14 17 01 ! ! Gimlemoen 25D, Serviceboks 422 o Privat: 47-38 09 15 93 ! ! N-4604 Kristiansand S, Norway _ /-_ Mob.: 47-91 87 35 02 ! +--------------------------------(_)>(_)-------------------------------+

1 0

EditDB
by odd.hauge＠hiMolde.no 04 Mai '06

04 Mai '06

Hi. /editdb gives following error in the latest bleeding edge version of nav: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 457, in import_module module = imp.load_module(mname, f, p, d) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 29, in ? import editTables,nav.Snmp,sys,re,copy,initBox,forgetSQL,nav.web File "/usr/local/nav/lib/python/nav/Snmp.py", line 34, in ? from pysnmp import role, v1, v2c, asn1 ImportError: cannot import name role - odd arne hauge

2 1

machine tracker
by odd.hauge＠hiMolde.no 02 Mai '06

02 Mai '06

Hi. The problem I had regarding Machine Tracker not reporting module/port for CatOS switches is fixed. I just removed and added the switches once again. - odd arne hauge

2 1

Bug-report
by a.l.prois＠usit.uio.no 25 Apr '06

25 Apr '06

Helo. I've got a couple of question regarding alerts in NAV (3.0.0). 1. Is the alertq table suppose to just increase and increase? manage=> select count(*) from alertq; count ------- 22726 (1 row) I could be wrong (I probably am), but if its not suppose to increase, my guess is this is why : => /usr/local/nav/lib/perl/NAV/AlertEngine/Alert.pm, line 233 sub delete() #deletes alert from db { my $this=shift; if(!$this->{queued}) { $this->{log}->printlog("Alert","delete",$Log::debugging, "deleted alertqid=$this->{id}"); #$this->{dbh}->do("delete from alertq where alertqid=$this->{id}"); } } ---------------------------------------------- 2. Some alerts are missing sysname in the alerts. It shows netbox.deviceid instead of netbox.sysname. This is very confusing for IT-guys at our facultys thats using NAV for receiving alerts regarding equipment at their location. I.e : manage=> select * from alerthistmsg where alerthistid = '16292'; alerthistid | state | msgtype | language | msg -------------+-------+---------+----------+---------------------------------------------- 16292 | x | sms | no | HW Ver endret: 1009 V01 A0 16292 | x | sms | en | HW Ver changed: 1009 V01 A0 16292 | x | email | en | Subject: Hardware version changed for (1009) This is an automatically generated message from NAV: Hardware version changed to: A0 from: V01 16292 | x | email | no | Subject: Hardware versjon endret for (1009) Dette er en automatisk generert melding fra NAV: Hardware versjon endret til: A0 fra: V01 (4 rows) ----------------------------------------------------------------- 3. DNS mismatch alerts are "wrong". I.e : manage=> select * from alerthistmsg where alerthistid = 204; 204 | x | email | en | Subject: DNS Mismatch (xxyyzz.uio.no) This is an automatically generated message from NAV: xxyyzz.uio.no does not match xxyyzz.uio.no 204 | x | email | no | Subject: DNS ikke i samsvar (xxyyzz.uio.no) Dette er en automatisk generert melding fra NAV: xxyyzz.uio.no matcher ikke xxyyzz.uio.no (2 rows) It should say "'hostname from switch' does not match DNSname" i guess.. ------------------------------------------------------------------ 4. Why are alerts like the example in '3.' coming? We get them from ALOT of devices every 6. hour.. These are more or less only Cisco Catalyst devices, if thats of importance. By the way. I've made a perl-deamon that controlls that all of NAVs internal and external onces are running, and reports by mail and/or sms if something is wrong. Version two will try to restart dead processes as well. If anybody wants it, just drop me an email. -Asbj?rn- >From kreide at gmail.com Thu Apr 20 02:49:13 2006 From: kreide at gmail.com (Kristian Eide) Date: Thu Apr 20 10:49:20 2006 Subject: [Nav-users] Bug-report In-Reply-To: <Pine.SOL.4.63-L.0604200956050.24757(a)saruman.uio.no> References: <Pine.SOL.4.63-L.0604200956050.24757(a)saruman.uio.no> Message-ID: <b4c110fd0604200149s17d27715n735e061540864ff6(a)mail.gmail.com> > 1. Is the alertq table suppose to just increase and increase? > manage=> select count(*) from alertq; > #$this->{dbh}->do("delete from alertq where > alertqid=$this->{id}"); I think this was commented out mainly for debugging. It is probably safe to enable the above delete command. > 2. Some alerts are missing sysname in the alerts. It shows netbox.deviceid You can change the text in alertmsg.conf. > 4. Why are alerts like the example in '3.' coming? We get them from ALOT > of devices every 6. hour.. These are more or less only Cisco Catalyst > devices, if thats of importance. I believe this is due to a string compare being case sensitive when it should be not, and that has been fixed in the svn tree (and will thus be part of the next version of nav if you do not want to compile yourself). > By the way. I've made a perl-deamon that controlls that all of NAVs > internal and external onces are running, and reports by mail and/or sms > if something is wrong. Version two will try to restart dead processes as > well. If anybody wants it, just drop me an email. This seems like a very welcomed addition to NAV. Morten, can we get it in for 3.1? -- Kristian

2 1

illegal attempt to update
by morten.vold＠uninett.no 21 Apr '06

21 Apr '06

Peder Magne Sefland wrote: > To test that service-monitor I stoped the sshd and nav gave me the > alert. But it still shows down after I have restarted the sshd. [...] > [2006-03-29 10:30:50] abstractChecker.py:updateRrd:182 [Error] rrd > update failed for XXX-XX.hivolda.no:ssh [illegal attempt to update > using time 1143621050 when last update time is 1143621059 (minimum > one second step)] > /usr/local/nav/bin/nav status shows that everything is up and running Sometimes it is also comforting to check specifically which NAV-related processes are actually running (the start/stop system still needs improvements in areas). Try doing a "ps w -u navcron", I'd like to see what is says. > Maybe there has been an ntp-update and nav does not how to handle the > time-sync problem. I think NTP would not normally adjust the system time in as large steps as 10 seconds, but I guess that depends on how you configure your NTP daemon. Anyway, the fact that the RRD file was not updated should not interfere with the actual dispatch of the serviceUp event. Are there more of these RRD errors in your log file? Does the log indicate when the SSH service was detected to be down, and whether it was detected up again? > But how can I correct this problem or is the problem somewhere else? Does restarting the servicemon process help? -- mvh Morten Vold UNINETT

1 0

Bug-report
by a.l.prois＠usit.uio.no 20 Apr '06

20 Apr '06

On Thu, 20 Apr 2006, Kristian Eide wrote: >> 1. Is the alertq table suppose to just increase and increase? >> manage=> select count(*) from alertq; >> #$this->{dbh}->do("delete from alertq where >> alertqid=$this->{id}"); > > I think this was commented out mainly for debugging. It is probably > safe to enable the above delete command. Seems like it, yes! -bash-3.00# cat /usr/local/nav/var/log/alertengine.log | grep 'deleted alertqid' | wc -l 17068 Is it safe/should I empty the alertq table? >> 2. Some alerts are missing sysname in the alerts. It shows netbox.deviceid > > You can change the text in alertmsg.conf. Ah, of course. Sorry, should've seen this myself! #:) >> 4. Why are alerts like the example in '3.' coming? We get them from ALOT >> of devices every 6. hour.. These are more or less only Cisco Catalyst >> devices, if thats of importance. > > I believe this is due to a string compare being case sensitive when it > should be not, and that has been fixed in the svn tree (and will thus > be part of the next version of nav if you do not want to compile > yourself). Do you know which file(s)? So I can fix it without compiling and change to svn.. -Asbj?rn- >From peder.sefland at hivolda.no Thu Apr 20 12:41:19 2006 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Thu Apr 20 11:41:39 2006 Subject: SV: Ang: [Nav-users] Bug-report In-Reply-To: <Pine.SOL.4.63-L.0604200956050.24757(a)saruman.uio.no> References: <Pine.SOL.4.63-L.0604200956050.24757(a)saruman.uio.no> Message-ID: <4447735F.3657.00CE.0(a)hivolda.no> Hi, I have the same problem. The DNS-mismatch problem was I able to sort out with making an alert filter group that Subtract alert type with dnsMismatch. I made this filter-group public so my colleagues can use the same filter-group. (se attached jpeg) We got a Cisco 3560GPoE and this generate an hw-change alert. First I tried to change the alertmsg.conf, but that gave me just some other empty alerts. Then I tried to make an public filter on this device. The problem is that the alert just shows the deviceid and not the system-name or ip-address. So I ended up with an filter-group that Subtract Type C3560GPoE. But this not working yet. The dnsMismatch filter worked fine but not the Subtract-Type-filter. Peder >>> Asbj?rn Pr?is <a.l.prois(a)usit.uio.no> 20.04.2006 10:27 >>> Helo. I've got a couple of question regarding alerts in NAV (3.0.0). 1. Is the alertq table suppose to just increase and increase? manage=> select count(*) from alertq; count ------- 22726 (1 row) I could be wrong (I probably am), but if its not suppose to increase, my guess is this is why : => /usr/local/nav/lib/perl/NAV/AlertEngine/Alert.pm, line 233 sub delete() #deletes alert from db { my $this=shift; if(!$this->{queued}) { $this->{log}->printlog("Alert","delete",$Log::debugging, "deleted alertqid=$this->{id}"); #$this->{dbh}->do("delete from alertq where alertqid=$this->{id}"); } } ---------------------------------------------- 2. Some alerts are missing sysname in the alerts. It shows netbox.deviceid instead of netbox.sysname. This is very confusing for IT-guys at our facultys thats using NAV for receiving alerts regarding equipment at their location. I.e : manage=> select * from alerthistmsg where alerthistid = '16292'; alerthistid | state | msgtype | language | msg -------------+-------+---------+----------+---------------------------------------------- 16292 | x | sms | no | HW Ver endret: 1009 V01 A0 16292 | x | sms | en | HW Ver changed: 1009 V01 A0 16292 | x | email | en | Subject: Hardware version changed for (1009) This is an automatically generated message from NAV: Hardware version changed to: A0 from: V01 16292 | x | email | no | Subject: Hardware versjon endret for (1009) Dette er en automatisk generert melding fra NAV: Hardware versjon endret til: A0 fra: V01 (4 rows) ----------------------------------------------------------------- 3. DNS mismatch alerts are "wrong". I.e : manage=> select * from alerthistmsg where alerthistid = 204; 204 | x | email | en | Subject: DNS Mismatch (xxyyzz.uio.no) This is an automatically generated message from NAV: xxyyzz.uio.no does not match xxyyzz.uio.no 204 | x | email | no | Subject: DNS ikke i samsvar (xxyyzz.uio.no) Dette er en automatisk generert melding fra NAV: xxyyzz.uio.no matcher ikke xxyyzz.uio.no (2 rows) It should say "'hostname from switch' does not match DNSname" i guess.. ------------------------------------------------------------------ 4. Why are alerts like the example in '3.' coming? We get them from ALOT of devices every 6. hour.. These are more or less only Cisco Catalyst devices, if thats of importance. By the way. I've made a perl-deamon that controlls that all of NAVs internal and external onces are running, and reports by mail and/or sms if something is wrong. Version two will try to restart dead processes as well. If anybody wants it, just drop me an email. -Asbj?rn-

1 0

Modules up and down
by odd.hauge＠hiMolde.no 19 Apr '06

19 Apr '06

Hi. I have two Cisco 7206 routers in my network. According to Nav the modules in these routers continuously goes up and down. Each module is almost always declared as down in 5 hours, then it's declared as up again for one hour, before it's declared as down again.. Of course the modules are up all the time. I have tried to delete the routers from Nav and add them again, I have tried different ip-addresses (yes, the loopback address to) without any success. Any suggestion anyone ? - odd arne hauge

2 1

Interfaces descriptions
by kaa＠msu.net 07 Apr '06

07 Apr '06

Good day! I've read guidelines for interfaces descriptions at http://metanav.ntnu.no/moin.cgi/SubnetsAndVlans , but still have some questions: 1) Does this URL is up to date (I'm using 3401 revision of NAV)? 2) Which way should I configure descriptions for switchports and router interfaces without ip addresses (trunk interfaces)? 3) Does NAV tracks interface description changes, or only when deleting/adding IP device to database? Thank you in advance. -- With best regards, Alexander Krapivin mailto:kaa@msu.net NOC MSUNET ICQ UIN:3967345 MSU, Moscow, Russia >From kaa at msu.net Mon Apr 17 14:23:49 2006 From: kaa at msu.net (Alexander Krapivin) Date: Mon Apr 17 11:23:59 2006 Subject: [Nav-users] Missing wlan.gif Message-ID: <44435EA5.7070308(a)msu.net> Hi! I've found that there is no file wlan.gif in nav sources. AFAIK, it should be in /usr/local/nav/apache/webapps/qq/gfx. Please add it to development tree. -- With best regards, Alexander Krapivin mailto:kaa@msu.net NOC MSUNET ICQ UIN:3967345 MSU, Moscow, Russia >From odd.hauge at hiMolde.no Tue Apr 18 13:01:52 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Tue Apr 18 12:02:43 2006 Subject: [Nav-users] Machine tracker Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C27D1B6C(a)stam.himolde.no> > -----Original Message----- > From: Kristian Eide [mailto:kreide@gmail.com] > Sent: Tuesday, April 04, 2006 10:05 AM > To: Hauge Odd Arne > Cc: nav-users(a)itea.ntnu.no > Subject: Re: [Nav-users] Machine tracker > > > Machine Tracker does not report Module/Port for machines > connected to CatOS switches, only the switch: > > MAC Switch > Module Port Start time End time > > 00127959bbf5 molde-telerom1-sw.hiMolde.no > 2006-03-30 16:10 Still active > > Does the port in question show up in the switch port report? > Yes it does. It's the same behavior for all ports on all catos switches. > > And Nav still reports that I have above 200 000 > switchports. Vlan defined in one location are shown in the > report for every location, regardless if the vlans are > active/defined or not on all switches in every location. > > I believe this is caused by a bug in the code which tries to > determine the extend of private (i.e. vlans without a router) > networks. > Unfortunately this code was not tested well enough and it > really should be disabled for now. I hope Morten can help > take care of this when he returns. > Great. - odd arne

1 0

Machine tracker
by odd.hauge＠hiMolde.no 04 Apr '06

04 Apr '06

Hi. Machine Tracker does not report Module/Port for machines connected to CatOS switches, only the switch: MAC Switch Module Port Start time End time 00127959bbf5 molde-telerom1-sw.hiMolde.no 2006-03-30 16:10 Still active And Nav still reports that I have above 200 000 switchports. Vlan defined in one location are shown in the report for every location, regardless if the vlans are active/defined or not on all switches in every location. Regards Odd Arne Hauge H?gskolen i Molde

2 1

pping.py stops
by a.l.prois＠usit.uio.no 30 Mar '06

30 Mar '06

On Thu, 30 Mar 2006, Peder Magne Sefland wrote: > I'm running centos and after the last update I got problem with that pping.py stops. > > I have talked with others how are running redhat, and where servicemon.py has stopped. > > is there a general problem with this version of python? > > rpm -q python > python-2.3.4-14.2 > > How can I log/debug this? Same thing happend here at UiO. Running on RHEL4 with same python version. pping.log just says "pping.py:signalhandler:186 [Alert ] Caught SIGTERM. Exiting." -Asbj?rn- >From peder.sefland at hivolda.no Thu Mar 30 17:52:36 2006 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Thu Mar 30 16:52:53 2006 Subject: [Nav-users] more python-problems Message-ID: <442C0CD3.3657.00CE.0(a)hivolda.no> It's startet with that pping.py stopped. Now I also get errors in /browse/service/allMatrix We're terribly sorry, but something went wrong.. :( ________________- Traceback (most recent call last): File "/usr/local/nav/lib/python/nav/web/devBrowser/dispatcher.py", line 96, in handler result = handler.process(request) File "/usr/local/nav/lib/python/nav/web/devBrowser/service.py", line 82, in process return showAllMatrix(request,sort) File "/usr/local/nav/lib/python/nav/web/devBrowser/service.py", line 112, in showAllMatrix curs = db.cursor() InterfaceError: already closed ____________________ and /index/index _____________________ Mod_python error: "PythonHandler mod_python.publisher" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/lib/python2.3/site-packages/mod_python/publisher.py", line 136, in handler result = util.apply_fs_data(object, req.form, req=req) File "/usr/lib/python2.3/site-packages/mod_python/util.py", line 361, in apply_fs_data return object(**args) File "/usr/local/nav/apache/webroot/index.py", line 72, in index page.messages = messagelist(req.session['user']) File "/usr/local/nav/lib/python/nav/web/messages/lib.py", line 125, in messagelist database.execute("select emotd.emotdid, title, description, last_changed, author, type, publish_start, publish_end, affected, downtime, count(value) as units from emotd left outer join emotd_related using (emotdid) where %s group by emotd.emotdid, title, description, last_changed, author, type, publish_start, publish_end, affected, downtime order by last_changed desc, publish_end desc limit %d offset %d" %(time,LIMIT,offset*LIMIT)) InterfaceError: already closed ____________________ Any ideas how I should fix this? Peder

1 0

cdp?
by morten.vold＠uninett.no 28 Mar '06

28 Mar '06

kjartan.malde(a)uis.no wrote: > I get these errors every hour past two days: > > org.postgresql.util.PSQLException: ERROR: invalid message format [...] > SQLException for update statement: INSERT INTO netboxinfo > (netboxid,key,var,val) VALUES ('50','unrecognizedCDP','102','W > java.lang.RuntimeException: Got SQLException, aborting put: ERROR: > invalid message format > Is it be because HP does not support cdp i newest sw, and if so how > do I get rid of these errors? If this occurred after upgrading the software on the device in question (netboxid=50), then it is likely (your traceback looks like it comes from getBoksMacs, it would be helpful to include the subject linje from e-mail that NAV produces) The error you are seeing, though, is a result of a protocol error in the communication between the PostgreSQL JDBC driver and the PostgreSQL server. There could be several reasons for this: * There could be a version mismatch between the JDBC driver and your server. * There could be a bug in the JDBC driver which makes it fail to properly escape/format certain data from an SQL statement in a protocol message (e.g. if your HP device returned some binary garbage on SNMP requests for CDP data). Unless you've recently upgraded your PostgreSQL server or driver, I'd say the second theory is the most likely suspect. Can you please tell me what the actual version numbers of your server and your driver are? You might want to upgrade your driver to the newest one available at http://jdbc.postgresql.org/download.html . -- mvh Morten Vold UNINETT

1 0

Revision 3400 java compile errors
by roar.pettersen＠uib.no 27 Mar '06

27 Mar '06

Hi ! > Downgraded to pysnmp-2.0.8 so now I'm able to > click on the "Edit database" again. But now I get this error message too often : Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 457, in import_module module = imp.load_module(mname, f, p, d) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 29, in ? import editTables,nav.Snmp,sys,re,copy,initBox,forgetSQL,nav.web File "/usr/local/nav/lib/python/nav/Snmp.py", line 34, in ? from pysnmp import role, v1, v2c, asn1 File "/usr/local/lib/python2.4/site-packages/pysnmp/v1.py", line 14, in ? class Error(asn1.Error): AttributeError: 'module' object has no attribute 'Error' Click on the browser refresh button one or two times then it is okey. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From morten.vold at uninett.no Mon Mar 27 17:03:28 2006 From: morten.vold at uninett.no (Morten Vold) Date: Mon Mar 27 16:03:38 2006 Subject: [Nav-users] Revision 3400 java compile errors In-Reply-To: <Pine.SOC.4.64.0603271554210.25365(a)alf.uib.no> References: <Pine.SOC.4.64.0603271214001.25365(a)alf.uib.no> <4427C44C.80608(a)uninett.no><4427E95B.9030807(a)uninett.no> <Pine.SOC.4.64.0603271536340.25365(a)alf.uib.no> <Pine.SOC.4.64.0603271554210.25365(a)alf.uib.no> Message-ID: <4427F0B0.9060707(a)uninett.no> Roar Pettersen wrote: > File "/usr/local/lib/python2.4/site-packages/pysnmp/v1.py", line 14, in ? > class Error(asn1.Error): > > AttributeError: 'module' object has no attribute 'Error' > Click on the browser refresh button one or two times then > it is okey. Your Apache server should be restarted, since parts of your previous pysnmp installation may still be loaded in these processes. I also hope you took care to properly uninstall the 3.3.5 version of pysnmp, or some files from that version might still be hanging around on your system. -- mvh Morten Vold UNINETT

1 0

Cricket reset?
by john.m.bredal＠ntnu.no 16 Mar '06

16 Mar '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Wojciech Kozicki wrote: > On Thursday 16 March 2006 12:19, you wrote: >> On Thu, 16 Mar 2006, Wojciech Kozicki wrote: >>> Hello, >>> >>> After "yum update" and reboot of my NAV-Centos machine Cricket stopped >>> working correctly. I have ONLY graphs for giga-switch-ports :( >>> >>> Is there some method to make Cricket create all configs from scratch? >>> Some reconfiguration method? >>> >>> Running /usr/local/nav/bin/makecricketconfig.pl didn't help :-( >> Sometimes NAV dont shutdown "correctly", and the navcron-subtree-* arent >> removed from /tmp. Try deleting the /tmp/navcron-subtree-* files and see >> if that helps! >> >> This method works for me.. #:) > > Hi, > > thanks for idea, but it didn't help :( > Hi, I am not quite certain what you mean by "not working correctly". Does Cricket not gather data (there are graphs, but they stopped updating after the reset) or are there no graphs whatsoever? Or are there nothing at all in the switch-ports and router-interfaces directories? If you look in the cricket-logs/ directory, what files are updated there? What errors do these files tell about? Please send me some lines if there are errors there. - -- John Magne Bredal NTNU, ITEA - Nettgruppa 91897366 / (735)90250 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEGWyowM1JRANrOA8RAuW8AJ9W+YQWnd8Uw7FCOFclau30w5ytRACcCeDb y6EYEDe5ZzroSseXQa8/aR4= =L42h -----END PGP SIGNATURE----- >From woj at tstd.pl Fri Mar 17 09:31:52 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Fri Mar 17 09:32:08 2006 Subject: [Nav-users] Cricket reset? In-Reply-To: <44196CA8.9050401(a)ntnu.no> References: <200603161203.54660.woj(a)tstd.pl> <200603161236.35034.woj(a)tstd.pl> <44196CA8.9050401(a)ntnu.no> Message-ID: <200603170931.54626.woj(a)tstd.pl> On Thursday 16 March 2006 14:48, John Magne Bredal wrote: [...] > Hi, > > I am not quite certain what you mean by "not working correctly". Does > Cricket not gather data (there are graphs, but they stopped updating > after the reset) Yes, I can see only empty graphs. The only graph that is correctly generated is gigabit interface from 2950 switch. Other interfaces (fast ethernet) are also not updated. > or are there no graphs whatsoever? Or are there nothing > at all in the switch-ports and router-interfaces directories? In /usr/local/nav/cricket/cricket-data/switch-ports I can see rrds files, but they are not updated. > If you look in the cricket-logs/ directory, what files are updated > there? What errors do these files tell about? Please send me some lines > if there are errors there. In this dir only "changelog" and "giga.0" files are updated. There are no errors in this logs. "normal.0" is not updated, in last lines there are no errors. regards, and thanks for Your replay. -- Woj >From steve at inteliport.com Sun Mar 19 07:43:30 2006 From: steve at inteliport.com (Stephen M. Lane) Date: Sun Mar 19 13:43:42 2006 Subject: [Nav-users] Could not connect to servlet Message-ID: <000a01c64b52$bd5e6780$6301a8c0@t2385> Hi all, I'm new to NAV and just joined the mailing list, have a couple of questions one which is about the Network explorer, the subject of this message is the error and below is the output from the nav web interface. Running latest version of Debian package of NAV 3 No password for pgsql and running on port 443 https Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/nav/web/pyproxy/proxy.py", line 61, in handler user=user, session=req.session.id) File "/usr/lib/python2.3/site-packages/nav/web/pyproxy/proxy.py", line 124, in doRequest request.request(method, path, query, headers) File "/usr/lib/python2.3/httplib.py", line 721, in request self._send_request(method, url, body, headers) File "/usr/lib/python2.3/httplib.py", line 742, in _send_request self.endheaders() File "/usr/lib/python2.3/httplib.py", line 715, in endheaders self._send_output() File "/usr/lib/python2.3/httplib.py", line 600, in _send_output self.send(msg) File "/usr/lib/python2.3/httplib.py", line 567, in send self.connect() File "/usr/lib/python2.3/httplib.py", line 551, in connect raise socket.error, msg error: (111, 'Connection refused')Any ideas would help.Thanks in advance >From morten.vold at uninett.no Mon Mar 20 09:00:48 2006 From: morten.vold at uninett.no (Morten Vold) Date: Mon Mar 20 09:00:56 2006 Subject: [Nav-users] Could not connect to servlet In-Reply-To: <000a01c64b52$bd5e6780$6301a8c0@t2385> References: <000a01c64b52$bd5e6780$6301a8c0@t2385> Message-ID: <441E6130.2010203(a)uninett.no> Stephen M. Lane wrote: > I'm new to NAV and just joined the mailing list, Hi, and welcome! > have a couple of questions one which is about the Network explorer, [...] > File "/usr/lib/python2.3/httplib.py", line 551, in connect > raise socket.error, msg > error: (111, 'Connection refused') > Any ideas would help.Thanks in advance Is Tomcat (the servlet container) up and running on your server? -- mvh Morten Vold UNINETT

1 0

Cricket reset?
by woj＠tstd.pl 16 Mar '06

16 Mar '06

Hello, After "yum update" and reboot of my NAV-Centos machine Cricket stopped working correctly. I have ONLY graphs for giga-switch-ports :( Is there some method to make Cricket create all configs from scratch? Some reconfiguration method? Running /usr/local/nav/bin/makecricketconfig.pl didn't help :-( TiA regards -- Woj >From a.l.prois at usit.uio.no Thu Mar 16 12:19:14 2006 From: a.l.prois at usit.uio.no (=?ISO-8859-1?Q?Asbj=F8rn_Pr=F8is?=) Date: Thu Mar 16 12:19:23 2006 Subject: [Nav-users] Cricket reset? In-Reply-To: <200603161203.54660.woj(a)tstd.pl> References: <200603161203.54660.woj(a)tstd.pl> Message-ID: <Pine.SOL.4.63-L.0603161215230.14817(a)saruman.uio.no> On Thu, 16 Mar 2006, Wojciech Kozicki wrote: > Hello, > > After "yum update" and reboot of my NAV-Centos machine Cricket stopped working > correctly. I have ONLY graphs for giga-switch-ports :( > > Is there some method to make Cricket create all configs from scratch? Some > reconfiguration method? > > Running /usr/local/nav/bin/makecricketconfig.pl didn't help :-( Sometimes NAV dont shutdown "correctly", and the navcron-subtree-* arent removed from /tmp. Try deleting the /tmp/navcron-subtree-* files and see if that helps! This method works for me.. #:) -Asbj?rn- >From woj at tstd.pl Thu Mar 16 12:36:34 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Thu Mar 16 12:36:44 2006 Subject: [Nav-users] Cricket reset? In-Reply-To: <Pine.SOL.4.63-L.0603161215230.14817(a)saruman.uio.no> References: <200603161203.54660.woj(a)tstd.pl> <Pine.SOL.4.63-L.0603161215230.14817(a)saruman.uio.no> Message-ID: <200603161236.35034.woj(a)tstd.pl> On Thursday 16 March 2006 12:19, you wrote: > On Thu, 16 Mar 2006, Wojciech Kozicki wrote: > > Hello, > > > > After "yum update" and reboot of my NAV-Centos machine Cricket stopped > > working correctly. I have ONLY graphs for giga-switch-ports :( > > > > Is there some method to make Cricket create all configs from scratch? > > Some reconfiguration method? > > > > Running /usr/local/nav/bin/makecricketconfig.pl didn't help :-( > > Sometimes NAV dont shutdown "correctly", and the navcron-subtree-* arent > removed from /tmp. Try deleting the /tmp/navcron-subtree-* files and see > if that helps! > > This method works for me.. #:) Hi, thanks for idea, but it didn't help :( regards Woj

1 0

Bug in Core switch port report ?
by odd.hauge＠hiMolde.no 13 Mar '06

13 Mar '06

According to the "Core switch ports" report in Nav I now have above 250 000 switchports. A sample dump of the report follows below. Nice is someone can look into the "problem/bug". - odd arne hauge H?gskolen i Molde Ouyput: Switchports 101 - 200 of 258814 Switch interface module port link Mbps duplex media vlan portname Connected to netbox Module some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 10 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 10 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 20 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 20 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 20 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 20 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 20 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 20 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 20 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 210 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 30 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 30 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 30 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 30 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 30 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 30 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 30 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 210 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 100 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 70 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 100 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 200 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 110 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 200 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 87 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 87 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 87 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 400 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 87 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 300 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 20 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 10 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 10 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 5 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 10 some-switch.hiMolde.no FastEthernet0/1 1 1 n 10.0 10

1 0

Beginners problem,
by kreide＠gmail.com 10 Mar '06

10 Mar '06

> my linux-gateway is no cisco-node , there is no cdp on it and so it can > t detect new devices on network. It seems also, the Hp-switches are not Actually NAV will fall back to a MAC-based discovery scheme if CDP is not available. -- Kristian

1 0

Rev 3383 build errors
by kaa＠msu.net 10 Mar '06

10 Mar '06

Kristian Eide wrote: >> During make, i've got the following errors: > > Sorry, I was too quick when checking in. This is now fixed in revision 3384. Thank you for fast responce. 3384 has been compiled w/o errors and now running :) > > -- > Kristian -- With best regards, Alexander Krapivin mailto:kaa@msu.net NOC MSUNET ICQ UIN:3967345 MSU, Moscow, Russia >From Dapp at gs-offenburg.de Fri Mar 10 10:27:47 2006 From: Dapp at gs-offenburg.de (Jochen Dapp) Date: Fri Mar 10 10:28:16 2006 Subject: Antw: Re: [Nav-users] Beginners problem, Message-ID: <s41154b2.038(a)server.gs.og.bw.schule.de> Hallo, thank you very much for your answer. Indeed I made progresses with NAV. I installed all snmp-components once more and now its running. My problem is however very special, because I have only a small network with about 25 HP switches ( Procurve 2524 and 8000) and 1 linux-router. I can see all devices, but only manually edited in db. I think because my linux-gateway is no cisco-node , there is no cdp on it and so it can t detect new devices on network. It seems also, the Hp-switches are not reporting any new device. This is of course no NAV-Problem, I know.... Perhaps i will try to install cdp-service on the linux-gw-box... Best regards Jochen Dapp --------------------------------------------------------------------- StD Jochen Dapp Stellvertr. Schulleiter Gewerblich-Technische Schulen Offenburg Moltkestr. 23, 77654 Offenburg Tel. 0781 - 4670 dapp(a)gs-offenburg.de http://www.gs-offenburg.de ---------------------------------------------------------------- >>> Morten Vold <morten.vold(a)uninett.no> 03/10 9:22 >>> Jochen Dapp wrote: > I can edit the postgres-db, insert and update new nodes, --> the > modules edit db and reports seems ok. But in Network-explorer (Fetch > from DB 0ms) or Maschine Tracker I get no answer on any search for a > device. Also cricket has no devices in the subdirs for switches ... > It must be a general problem.. > Has anyone an idea, where to start searching the problem ? > > Many thanks for any help! Have you started the NAV back-end services? It sounds like you've seeded the database with devices, but not started these. Information will not be collected from/about the devices unless you start the back-end services: /usr/local/nav/bin/nav start Check the status of running services with: /usr/local/nav/bin/nav status When you add new devices, cricket won't pick them up until makecricketconfig.pl is run. This happens automatically once a day (some time during the night, it is part of the cricket service), but it can also be run manually (preferably as the user navcron to retain correct file permissions). The machine tracker searches data collected by the iptrace (arplogger) and mactrace (getBoksMacs) services, which in turn are partly dependent on correct information about your network topology (Updated by the networkDiscovery service). The Network explorer is also dependent on the topology information. It's been a few weeks since your post, have you made any progress in this time? -- mvh Morten Vold UNINETT

1 0

[Nav-users]
by ivan＠logikom.net 02 Mar '06

02 Mar '06

> is this debian sarge ? no, i'm running suse. > i had the same error, but it was unrelated to python, it was just > becouse tomcat4 was not running. well, i checked tomcat status and it's running...not sure what to do/check next... with regards ivan. -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/ >From frode.jemtland at skolelinux.no Thu Mar 2 22:36:18 2006 From: frode.jemtland at skolelinux.no (Frode Jemtland) Date: Thu Mar 2 22:36:32 2006 Subject: [Nav-users] Problem adding ip devices In-Reply-To: <200602282101.24841.frode.jemtland(a)skolelinux.no> References: <200602282101.24841.frode.jemtland(a)skolelinux.no> Message-ID: <200603022236.19661.frode.jemtland(a)skolelinux.no> Tuesday 28. February 2006 21:01, wrote Frode Jemtland: > Hi > > I'm new to NAV, and this list. Have tried to search the archive, but could > not find any answers. > > I have tried to import ip devices, but I keep getting a error message I > can't understand. > > If I select Tools > Edit database > IP devices > Add, and fill in all > the fields for a switch, except the RW community string (We do not have > thees, and I get the same error if I fill in feks. private), I get the > error: > > Error: exceptions.TypeError: unsubscriptable object > > If I try to do a bulk import, I do get some of the same error message: > 1 h-51-01:172.16.2.10:hikt:GSW:public:::Coreswitch > Uknown error while querying IP device: exceptions.TypeError: > unsubscriptable object I have found out that I can't have a value in the rocommunity field. That means I can only add SRV or OTHER ip devices. The application kind of misses a key feature without switches, routers, etc. I have try'd to insert a switch as OTHER, and changed the values later, but this gives me the same error as explained before... Do anyone have any suggestions on what could be wrong? (, or where I could look to find any errors ?) -- -Frode The longest part of the journey is said to be the passing of the gate. -- Marcus Terentius Varro

1 0

Problem adding ip devices
by frode.jemtland＠skolelinux.no 28 Feb '06

28 Feb '06

Hi I'm new to NAV, and this list. Have tried to search the archive, but could not find any answers. I have tried to import ip devices, but I keep getting a error message I can't understand. If I select Tools > Edit database > IP devices > Add, and fill in all the fields for a switch, except the RW community string (We do not have thees, and I get the same error if I fill in feks. private), I get the error: Error: exceptions.TypeError: unsubscriptable object If I try to do a bulk import, I do get some of the same error message: 1 h-51-01:172.16.2.10:hikt:GSW:public:::Coreswitch Uknown error while querying IP device: exceptions.TypeError: unsubscriptable object Anyone seen this before? I'm running NAV on a Debian testing. Have installed the Debian backage of NAV 2+3.0rc2-1, as explained on http://pkg-nav.alioth.debian.org/. Some more status output: # /etc/init.d/nav status networkDiscovery: Up cricket: Up eventEngine (pid 7298) is running... iptrace: Up maintengine: Up servicemon.py (pid 7310) is running... smsd.pl (pid 7318) is running... thresholdMon: Up mactrace: Up logengine: Up safe_smsd: Up getDeviceData (pid 7325) is running... backup: Up pping.py (pid 7333) is running... Alertengine is running with process id 7344. It has been running for 21 minutes and 55 seconds. # /etc/init.d/postgresql-7.4 status Version Cluster Port Status Owner Data directory Log file 7.4 main 5432 online postgres /var/lib/postgresql/7.4/main /var/log/postgresql/postgresql-7.4-main.log # /etc/init.d/tomcat4 status Tomcat 4.1 servlet engine is running with Java pid 7072 If you need any thing else, I'll be happy to extract any information you need. -- -Frode Algebraic symbols are used when you do not know what you are talking about. -- Philippe Schnoebelen

1 0

A NAV forum is live for use.
by dpinkoski＠dnps.com 03 Feb '06

03 Feb '06

Evert has been gracious enough to setup a forum for NAV users. Feel free to utilize this service. http://www.meulie.net/forum_viewforum.php?97

2 1

Error adding new device
by hana＠melsa.net.id 25 Jan '06

25 Jan '06

I have a problem on nav installation, when I tried to add a new device, always been an error : Error: exceptions.AttributeError: 'NoneType' object has no attribute 'lstrip' had anyone experienced with the same problem? >From dpinkoski at dnps.com Fri Jan 27 15:08:34 2006 From: dpinkoski at dnps.com (David Pinkoski) Date: Fri Jan 27 21:13:34 2006 Subject: [Nav-users] Traffic map is mostly empty. Message-ID: <1138392514.11052.9.camel(a)localhost.localdomain> I just got NAV installed and appears to be working somewhat. We utilize no Cisco devices at all, so I had to add some types first. I have added some ip devices but after one week, I still see nothing in the Traffic map/vlanPlot. The legend appears on the left, but only the words "Traffic Map: Top" is displayed in the top center of page. I see nothing in the documentation on how to configure this. Any help would be appreciated. Since I'm asking questions, also i have added about 5 switches, and each switch is identical. But one switch will not show how many ports it has on it in the "Devices in Operation" report/netbox. The only difference that I can see, is that the software rev may not be the same, but the sysObjectID is identical. Any ideas on why one switch might not report back? snmp community strings are the same. >From dpinkoski at dnps.com Fri Jan 27 15:14:17 2006 From: dpinkoski at dnps.com (David Pinkoski) Date: Fri Jan 27 21:16:24 2006 Subject: [Nav-users] Cron <navcron@localhost> $BINDIR/getBoksMacs.sh $NUM_THREADS Message-ID: <1138392857.11052.12.camel(a)localhost.localdomain> Any idea at all about what the following might mean? It's an email from Cron Daemon for the job named in the subject of this email. java.lang.NullPointerException at QueryBoks.processMacEntry(QueryBoks.java:917) at QueryBoks.run(QueryBoks.java:264)

1 0

Service port is down on 158.XX.XX.XXX
by peder.sefland＠hivolda.no 20 Jan '06

20 Jan '06

>>> <alertengine(a)XXX.XXXX.no> 20.01.2006 10:35:22 >>> Service port on 158.XX.XX.XXX is down since 2006-01-20 10:34:34. Server up: Yes Status: Main building This was a crash and should not be "Server up: Yes" Some logg from servicemon.log [2006-01-20 10:34:06] abstractChecker.py:run:117 [Info] 158.XX.XX.XXX:port -> timed out [2006-01-20 10:34:06] abstractChecker.py:run:131 [Notice] 158.XX.XX.XXX:port -> State changed. New check in 5 sec. (DOWN, timed out) This is normal if we stop the service that we check on the server [2006-01-20 10:34:34] abstractChecker.py:run:117 [Info] 158.XX.XX.XXX:port -> (113, 'No route to host') [2006-01-20 10:34:34] abstractChecker.py:run:140 [Alert ] 158.XX.XX.XXX:port -> DOWN, (113, 'No route to host') But these line are special for the server that crash and should not give "Server up: Yes" Has this been solved in the latest nav-3.0.0-1.noarch.rpm? Peder >From magnus at ntnu.no Fri Jan 20 11:20:49 2006 From: magnus at ntnu.no (Magnus Nordseth) Date: Fri Jan 20 11:21:07 2006 Subject: [Nav-users] Service port is down on 158.XX.XX.XXX In-Reply-To: <s3d0c2ce.064(a)HVO-3.hivolda.no> References: <s3d0c2ce.064(a)HVO-3.hivolda.no> Message-ID: <20060120102048.GA15629(a)stud.ntnu.no> Peder Magne Sefland: > This was a crash and should not be "Server up: Yes" > > Some logg from servicemon.log > [2006-01-20 10:34:06] abstractChecker.py:run:117 [Info] > 158.XX.XX.XXX:port -> timed out > [2006-01-20 10:34:06] abstractChecker.py:run:131 [Notice] > 158.XX.XX.XXX:port -> State changed. New check in 5 sec. (DOWN, timed > out) > > This is normal if we stop the service that we check on the server > > > [2006-01-20 10:34:34] abstractChecker.py:run:117 [Info] > 158.XX.XX.XXX:port -> (113, 'No route to host') > [2006-01-20 10:34:34] abstractChecker.py:run:140 [Alert ] > 158.XX.XX.XXX:port -> DOWN, (113, 'No route to host') > > But these line are special for the server that crash and should not > give "Server up: Yes" > > Has this been solved in the latest nav-3.0.0-1.noarch.rpm? Service state monitoring is handled by one subsystem, while pping handles netbox state monitoring. pping usually operates at a higher frequency than servicemon, and should detect the server crash before servicemon. Both pping and statemon posts events to eventengine. Eventengine should wait for some seconds, before processing the event, to see if correlated events comes in. To debug this, I suggest that you check the log of pping and eventengine to see if a netbox down event is sent. -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc >From peder.sefland at hivolda.no Fri Jan 20 12:57:44 2006 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Fri Jan 20 12:58:34 2006 Subject: SV: Re: [Nav-users] Service port is down on 158.XX.XX.XXX Message-ID: <s3d0de62.023(a)HVO-3.hivolda.no> >>> Magnus Nordseth <magnus(a)ntnu.no> 20.01.2006 11:20:49 >>> Peder Magne Sefland: > This was a crash and should not be "Server up: Yes" > > Some logg from servicemon.log > [2006-01-20 10:34:06] abstractChecker.py:run:117 [Info] > 158.XX.XX.XXX:port -> timed out > [2006-01-20 10:34:06] abstractChecker.py:run:131 [Notice] > 158.XX.XX.XXX:port -> State changed. New check in 5 sec. (DOWN, timed > out) > > This is normal if we stop the service that we check on the server > > > [2006-01-20 10:34:34] abstractChecker.py:run:117 [Info] > 158.XX.XX.XXX:port -> (113, 'No route to host') > [2006-01-20 10:34:34] abstractChecker.py:run:140 [Alert ] > 158.XX.XX.XXX:port -> DOWN, (113, 'No route to host') > > But these line are special for the server that crash and should not > give "Server up: Yes" > > Has this been solved in the latest nav-3.0.0-1.noarch.rpm? Service state monitoring is handled by one subsystem, while pping handles netbox state monitoring. pping usually operates at a higher frequency than servicemon, and should detect the server crash before servicemon. Both pping and statemon posts events to eventengine. Eventengine should wait for some seconds, before processing the event, to see if correlated events comes in. To debug this, I suggest that you check the log of pping and eventengine to see if a netbox down event is sent. -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc Thank you for your respond pping.log says [2006-01-20 10:34:46] pping.py:generateEvents:142 [Notice] 158.XX.XX.XXX (158.XX.XX.XXX) marked as down. [2006-01-20 10:36:46] pping.py:generateEvents:159 [Notice] 158.XX.XX.XXX (158.XX.XX.XXX) marked as up. eventEngine.log says Jan 20 10:34:47 2006 eventEngine BOX_STATE_EVENTHANDLER-6-HANDLE Box going down: Box [ip=158.XX.XX.XXX, sysname=158.XX.XX.XXX, status=up] Jan 20 10:35:47 2006 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Box down: 158.XX.XX.XXX If we look at the time in the alert-mail, it is send before pping dectect that the server is down >>> <alertengine(a)XXX.XXXX.no> 20.01.2006 10:35:22 >>> Service port on 158.XX.XX.XXX is down since 2006-01-20 10:34:34. Peder >From kaa at msu.net Mon Jan 23 16:00:56 2006 From: kaa at msu.net (Alexander Krapivin) Date: Mon Jan 23 14:00:59 2006 Subject: [Nav-users] Errors while building NAV from sources Message-ID: <43D4D388.2060801(a)msu.net> Hello! I'm trying to build NAV from latest trunk sources. Everything is OK, until 'make install'. Please, advice me where I'm wrong. While doing 'make install' i've got the following errors: --cut here-- compile: [javac] Compiling 1 source file to /usr/local/src/nav/trunk/src/Database/build [javac] /usr/local/src/nav/trunk/src/Database/src/no/ntnu/nav/Database/Database.java:40: package no.ntnu.nav.logger does not exist [javac] import no.ntnu.nav.logger.Log; [javac] ^ [javac] /usr/local/src/nav/trunk/src/Database/src/no/ntnu/nav/Database/Database.java:774: cannot find symbol [javac] symbol : variable Log [javac] location: class no.ntnu.nav.Database.Database [javac] Log.e("DATABASE-QUERY", "Got Exception; database is probably down: " + msg); [javac] ^ [javac] /usr/local/src/nav/trunk/src/Database/src/no/ntnu/nav/Database/Database.java:1024: cannot find symbol [javac] symbol : variable Log [javac] location: class no.ntnu.nav.Database.Database [javac] Log.e("DATABASE-UPDATE", "Got Exception; database is probably down: " + msg); [javac] ^ [javac] 3 errors BUILD FAILED /usr/local/src/nav/trunk/src/Database/build.xml:30: Compile failed; see the compiler error output for details. Total time: 1 second make[1]: *** [install] Error 1 make[1]: Leaving directory `/usr/local/src/nav/trunk/src' make: *** [install-all] Error 1 --cut here-- -- With best regards, Alexander Krapivin mailto:kaa@msu.net NOC MSUNET ICQ UIN:3967345 MSU, Moscow, Russia >From magnus at ntnu.no Mon Jan 23 14:59:34 2006 From: magnus at ntnu.no (Magnus Nordseth) Date: Mon Jan 23 14:59:37 2006 Subject: [Nav-users] Service port is down on 158.XX.XX.XXX In-Reply-To: <s3d0de62.024(a)HVO-3.hivolda.no> References: <s3d0de62.024(a)HVO-3.hivolda.no> Message-ID: <20060123135934.GA9534(a)stud.ntnu.no> Peder Magne Sefland: > pping.log says > [2006-01-20 10:34:46] pping.py:generateEvents:142 [Notice] > 158.XX.XX.XXX (158.XX.XX.XXX) marked as down. > [2006-01-20 10:36:46] pping.py:generateEvents:159 [Notice] > 158.XX.XX.XXX (158.XX.XX.XXX) marked as up. > > eventEngine.log says > Jan 20 10:34:47 2006 eventEngine BOX_STATE_EVENTHANDLER-6-HANDLE Box > going down: Box [ip=158.XX.XX.XXX, sysname=158.XX.XX.XXX, status=up] > Jan 20 10:35:47 2006 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Box > down: 158.XX.XX.XXX > > If we look at the time in the alert-mail, it is send before pping > dectect that the server is down > > >>> <alertengine(a)XXX.XXXX.no> 20.01.2006 10:35:22 >>> > Service port on 158.XX.XX.XXX is down since 2006-01-20 10:34:34. Peder, What is your pping and servicemon checkinterval? Check pping.conf and servicemon.conf. -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc >From peder.sefland at hivolda.no Mon Jan 23 15:30:21 2006 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Mon Jan 23 15:30:48 2006 Subject: SV: Re: [Nav-users] Service port is down on 158.XX.XX.XXX Message-ID: <s3d4f69e.082(a)HVO-3.hivolda.no> >>> Magnus Nordseth <magnus(a)ntnu.no> 23.01.2006 14:59:34 >>> Peder Magne Sefland: > pping.log says > [2006-01-20 10:34:46] pping.py:generateEvents:142 [Notice] > 158.XX.XX.XXX (158.XX.XX.XXX) marked as down. > [2006-01-20 10:36:46] pping.py:generateEvents:159 [Notice] > 158.XX.XX.XXX (158.XX.XX.XXX) marked as up. > > eventEngine.log says > Jan 20 10:34:47 2006 eventEngine BOX_STATE_EVENTHANDLER-6-HANDLE Box > going down: Box [ip=158.XX.XX.XXX, sysname=158.XX.XX.XXX, status=up] > Jan 20 10:35:47 2006 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Box > down: 158.XX.XX.XXX > > If we look at the time in the alert-mail, it is send before pping > dectect that the server is down > > >>> <alertengine(a)XXX.XXXX.no> 20.01.2006 10:35:22 >>> > Service port on 158.XX.XX.XXX is down since 2006-01-20 10:34:34. Peder, What is your pping and servicemon checkinterval? Check pping.conf and servicemon.conf. pping.conf # How often do you want to ping checkinterval = 20# servicemon.conf How often do we want to check each service checkinterval = 60 Peder

1 0

New error after recreating the databases
by jsidwell＠perisys.net 19 Jan '06

19 Jan '06

NAV let me add a room, location, and a device type as well as one router, but now when adding the second router I get this error: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 463, in editPage outputForm,action) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 2435, in add disabled=True)) TypeError: __init__() takes at least 2 non-keyword arguments (1 given)

1 0

SV: Re: [Nav-users] logger.conf
by peder.sefland＠hivolda.no 13 Jan '06

13 Jan '06

I have maybe a diffrent problem This is a tail of may cisco.log file Jan 13 14:00:08 158.X.X.X 448: 1w4d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down Jan 13 14:00:13 158.X.X.X 449: 1w4d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up Jan 13 14:00:35 volda-XXX 1824540: 1y35w: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to down Jan 13 14:00:38 volda-XXX 1824541: 1y35w: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to up Jan 13 14:00:41 volda-XXX 1824542: 1y35w: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to up The switch with the ip-adresse turn up ok in the syslog Analyzer, but the switch with the sysname turn up under parsing errors Any ideas? Peder >>> Wojciech Kozicki <woj(a)tstd.pl> 13.01.2006 11:20:39 >>> On Friday 13 January 2006 11:11, Morten Vold wrote: > On 04/01/2006 14:59, Wojciech Kozicki uttered: > > how should be cisco box configured to have correct analyse in NAV Syslog > > Analyzer? > > I'm sorry to say that the syslog analyzer is an ill conceived subsystem > of NAV, and it is debated whether it belongs there or not. The > developer that wrote it no longer works on the project, and hardly > anyone I know of cares to use it (most sysadmins I know prefer to grep > the log files manually). Well, I am a console person :) But I thin that Logger module is really usefull, sometimes clicking is not so good... > With regards to your actual question, I have no idea about the required > format. Cisco equipment at NTNU still logs to our NAV 2 installation, > and the syslog analyzer har been rewritten from scratch in NAV 3. > > From what I can see, our logs look something like this: > > Jan 13 11:03:48 <router_name> 370245: Jan 13 11:03:52: > %SEC-6-IPACCESSLOGP: list vlan18out denied udp <ip1>(50186) -> > <ip2>(427), 1 packet Thank You for this info. > What I do know, is that your logger.conf must point to the actual log > file to pick up the log lines from. The default is > /usr/local/nav/var/log/cisco.log, which means your syslog daemon must be > configured to write log entries from external hosts to this file (or > configure a different file name). The logengine cron job runs every > minute to dump new entries from this file into the database. I also > believe logengine will truncate the log file after it has been read. This works ok, because nav has got my logs, but it puts them into error table. regards - Woj _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >From morten.vold at ntnu.no Fri Jan 13 14:10:14 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 14:10:08 2006 Subject: [Nav-users] Trouble with editdb and UTF-8 In-Reply-To: <200601131244.k0DCiTgk002363(a)duke.cc.uit.no> References: <200601131244.k0DCiTgk002363(a)duke.cc.uit.no> Message-ID: <43C7A6B6.6010406(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 13/01/2006 13:44, Borge Brunes uttered: > My input is UTF-8, so I guess that the ugly serial number ' ??!,' > came from initBox.py or another of the py-script editdb use. Ok, I took a closer look at the code, and this is what seems to be going on: 1. Editdb retrieves a list of OIDs, known to return serial numbers, from the snmpoid table. 2. It then proceeds to query the new IP device for each one of those OIDs. 3. It then interprets all the retrieved values as if they were serial numbers, and queries the NAV database to see if any devices with these serial numbers already exist in the database. What seems to be happening, is that some devices return garbage as their reply to one or more of these OID queries, and that is what PostgreSQL is choking on. You can see which OIDs are queried if you execute the following SQL on your manage database: select snmpoid,getnext from snmpoid where oidkey ilike '%serial%'; I'll try to come up with a solution to this later, as I'm a bit pressed for time right now. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx6a2XxIl0kpcOkQRAkfmAJ9zygYxnUYhLT8uC9/Jw9aZ6Ybo8wCePRY6 MwaPOmwCQ+Z0UVeOvNUGYAA= =ne4y -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Mon Jan 16 09:44:32 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Mon Jan 16 09:44:34 2006 Subject: [Nav-users] Alcatel devices In-Reply-To: <200601131010.07073.woj(a)tstd.pl> References: <200601131010.07073.woj(a)tstd.pl> Message-ID: <43CB5CF0.6070802(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 13/01/2006 10:10, Wojciech Kozicki uttered: > anybody was successful monitoring Alcatel switches in NAV? (for > example X590), especially in cricket? I assume that you've successfully added your Alcatel switches to NAV, so that you at least have basic status monitoring? I'm no Cricket expert, but as far as I know, you'll have basic switch statistics monitored by Cricket as long as the switch supports the standard MIBs for this? If there are any special OIDs you wish to monitor and graph with Cricket, I believe you can add these to NAV by using editdb to add an snmpoid (afterward, getDeviceData should automatically test all your IP devices to see which ones support this new OID). Use 'cricket' as the description for the OID, I believe this will trigger makecricketconfig to configure cricket to collect this OID. Cc: John-Magne, for QA ;) - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDy1zvXxIl0kpcOkQRAgFjAKDcjppcrP2oYl2OKHpf6mxE3ve9uwCeJTe+ 3JGiuGZz/3kDDvykbVR+jYQ= =0S9G -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Mon Jan 16 11:06:28 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Mon Jan 16 11:06:40 2006 Subject: [Nav-users] Trouble with editdb and UTF-8 In-Reply-To: <43C7A6B6.6010406(a)ntnu.no> References: <200601131244.k0DCiTgk002363(a)duke.cc.uit.no> <43C7A6B6.6010406(a)ntnu.no> Message-ID: <43CB7024.9070908(a)ntnu.no> Skipped content of type multipart/mixed

1 0

getBoksMacs.sh and java.lang.NullPointerException
by morten.vold＠ntnu.no 13 Jan '06

13 Jan '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 12/01/2006 11:54, Borge Brunes uttered: >>The fix is to change line 917 in that file from: >>if (macVlan.size() == 0) continue; >>To: >>if (macVlan == null || macVlan.size() == 0) continue; >>I can check this into svn later. > Yes! It fixed the problem. Thanks. Lovely! Kristian, when will you be checking in the fix? :) - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx5sAXxIl0kpcOkQRArreAJ0ZKuSQ4+cj2yUBR9FnX3t6bqhArQCg1TME htAvwyGj74lbb4jPbQyevXA= =cFgk -----END PGP SIGNATURE----- >From peder.sefland at hivolda.no Fri Jan 13 13:24:47 2006 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Fri Jan 13 13:25:25 2006 Subject: SV: Re: [Nav-users] logger.conf Message-ID: <s3c7aa3c.042(a)HVO-3.hivolda.no> For us it was a useful tool in nav2, and we where looking forward to it in nav3 as well. And it has been mention by others in the "Feature request anyone" Nav is a powerfull tool to analyze your network, and collecting syslog is an importen part in this work. I understand that resources are limited,(refering to a mail from Morten with subject Re: [Nav-users] Again?) but Syslog Analyzer is a already implemented function that I hope will be stable. Peder >>> Morten Vold <morten.vold(a)ntnu.no> 13.01.2006 11:11:22 >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 04/01/2006 14:59, Wojciech Kozicki uttered: > how should be cisco box configured to have correct analyse in NAV Syslog > Analyzer? I'm sorry to say that the syslog analyzer is an ill conceived subsystem of NAV, and it is debated whether it belongs there or not. The developer that wrote it no longer works on the project, and hardly anyone I know of cares to use it (most sysadmins I know prefer to grep the log files manually). With regards to your actual question, I have no idea about the required format. Cisco equipment at NTNU still logs to our NAV 2 installation, and the syslog analyzer har been rewritten from scratch in NAV 3. - From what I can see, our logs look something like this: Jan 13 11:03:48 <router_name> 370245: Jan 13 11:03:52: %SEC-6-IPACCESSLOGP: list vlan18out denied udp <ip1>(50186) -> <ip2>(427), 1 packet What I do know, is that your logger.conf must point to the actual log file to pick up the log lines from. The default is /usr/local/nav/var/log/cisco.log, which means your syslog daemon must be configured to write log entries from external hosts to this file (or configure a different file name). The logengine cron job runs every minute to dump new entries from this file into the database. I also believe logengine will truncate the log file after it has been read. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx3zKXxIl0kpcOkQRAiuGAKDpLWmxswuK2raIQCRS9iqDlp0MlQCdGFXg Aa2aflR3AyWhZmoaUAXiCbU= =gv6K -----END PGP SIGNATURE----- _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >From morten.vold at ntnu.no Fri Jan 13 13:31:03 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 13:30:56 2006 Subject: [Nav-users] Errors when trying to make NAV on a Gentoo system with blackdown-jdk/jre In-Reply-To: <43C79AED.7040005(a)witelcom.com> References: <WorldClient-F200601071038.AA38330001(a)witelcom.com> <43C793B2.7010802(a)ntnu.no> <43C79AED.7040005(a)witelcom.com> Message-ID: <43C79D87.4060903(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 13/01/2006 13:19, Evert Meulie uttered: > BUILD FAILED > /root/nav-3.0.0/src/webapps/navAdmin/build.xml:163: taskdef class > org.apache.catalina.ant.DeployTask cannot be found Copy and paste from the lines that immediately precede build.xml:163:  - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx52HXxIl0kpcOkQRAiewAKCEFDoJVBJBcWtri+eUY5p0XA1nkwCg4hSI 8OpG9KBnqIgeyEcAE09KhdE= =SbMr -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Fri Jan 13 13:36:28 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 13:36:22 2006 Subject: SV: Re: [Nav-users] logger.conf In-Reply-To: <s3c7aa3c.042(a)HVO-3.hivolda.no> References: <s3c7aa3c.042(a)HVO-3.hivolda.no> Message-ID: <43C79ECC.2030602(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 13/01/2006 13:24, Peder Magne Sefland uttered: > I understand that resources are limited,(refering to a mail from > Morten with subject Re: [Nav-users] Again?) but Syslog Analyzer is a > already implemented function that I hope will be stable. I don't think it will disappear, but it may reappear in a different form. The people at the University of Troms? argue that syslog does not belong in a database, and I tend to agree - the current design is far from elegant. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx57MXxIl0kpcOkQRAjUaAJ9vRhSIVvbq79ZgRKC9D4vj19Pt5gCgpQXj ZkrbLp0mRTnXVX0X9Tp9Iu8= =vcyJ -----END PGP SIGNATURE----- >From Borge.Brunes at cc.uit.no Fri Jan 13 13:44:29 2006 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Fri Jan 13 13:44:36 2006 Subject: [Nav-users] Trouble with editdb and UTF-8 In-Reply-To: Message from Morten Vold <morten.vold(a)ntnu.no> of "Fri, 13 Jan 2006 13:11:21 +0100." <43C798E9.5020706(a)ntnu.no> Message-ID: <200601131244.k0DCiTgk002363(a)duke.cc.uit.no> morten.vold(a)ntnu.no said: > How did you add them? Bulk import? Nope, no bulk-import - added one by one. >> I know that the encoding-consistency for Unicode has been tightened >> down in postgres 8.1: >> http://archives.postgresql.org/pgsql-hackers/2005-10/msg00972.php > > Yep, that is probably what triggers the error, question is still what the > input actually was. Editdb will interpret everything fed to it as UTF-8 (at > least if that's what your browser indicates), but if your actual input > contains invalid UTF-8 characters, editdb won't know. My input is UTF-8, so I guess that the ugly serial number ' ??!,' came from initBox.py or another of the py-script editdb use. B?rge

1 0

Alcatel devices
by woj＠tstd.pl 13 Jan '06

13 Jan '06

Hello, anybody was successful monitoring Alcatel switches in NAV? (for example X590), especially in cricket? regards -- Woj >From woj at tstd.pl Fri Jan 13 10:12:01 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Fri Jan 13 10:12:30 2006 Subject: [Nav-users] logger.conf In-Reply-To: <200601041459.11900.woj(a)tstd.pl> References: <200601041459.11900.woj(a)tstd.pl> Message-ID: <200601131012.01521.woj(a)tstd.pl> On Wednesday 04 January 2006 14:59, Wojciech Kozicki wrote: > Hello, > > how should be cisco box configured to have correct analyse in NAV Syslog > Analyzer? > > I have cisco communicates in following format: > > Jan 4 14:50:47 <router_name> 2951: Jan 4 13:50:46: %SYS-5-CONFIG_I: > Configured from console by vty0 (<ip>) > > I can see this communicates in NAV, but only in: > https://nav_ip/logger/?error ("parsing errors" link) > I still have this problem, can anybody help? Which log I should check? regards -- Woj >From morten.vold at ntnu.no Fri Jan 13 10:46:51 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 10:46:44 2006 Subject: [Nav-users] Difference between netboxid and deviceid In-Reply-To: <200601021436.k02Eabuc065387(a)duke.cc.uit.no> References: <200601021436.k02Eabuc065387(a)duke.cc.uit.no> Message-ID: <43C7770B.30508(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 02/01/2006 15:36, Borge Brunes uttered: > see subject. > > The reason why I ask? I get a lot of these in getDeviceData-stderr.log : > > SQLException for update statement: UPDATE netbox SET deviceid='4177' WHERE netboxid='374' > org.postgresql.util.PSQLException: ERROR: duplicate key violates unique constraint "netbox_deviceid_key > SQLException for update statement: UPDATE netbox SET deviceid='4177' WHERE netboxid='377' > org.postgresql.util.PSQLException: ERROR: duplicate key violates unique constraint "netbox_deviceid_key" > > manage=# select * from netbox WHERE deviceid='4177'; > netboxid | ip | roomid | typeid | deviceid | > ----------+--------------+----------+--------+----------+ > 369 | 129.242.X.X | fp2N4119 | 16 | 4177 | > > > > It's three Cisco AP1200 (witch different serial#) fighting about > "deviceid='4177'" A device is any networking equipment that (may) have a serial number; think of it as any device in your equipment inventory. A netbox is a device that has been assigned an IP address and is monitored by NAV (in the user interface, a netbox is usually referred to as an IP Device). The only reason I can think of why this is happening on your installation, is that two netboxes on your network are reporting the same serial number when queried by SNMP (I have actually seen this happen on a couple of boxes here at NTNU). Before we consider the alternative scenario (NAV bug), I would like you to retrieve information about the device with id 4177: SELECT * FROM device WHERE deviceid=4177 (censor any data you don't want to go public with). Then, attempt to retrieve the serial number by snmpget/walk from the three IP addresses in question. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx3cLXxIl0kpcOkQRAh7KAKDoyPyy43kpt/osENSvBzlVC8wD3gCgkQoE eGPw1TlOehjWsUdOxaZIMGA= =4yhd -----END PGP SIGNATURE----- >From woj at tstd.pl Fri Jan 13 10:46:23 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Fri Jan 13 10:46:50 2006 Subject: [Nav-users] Alcatel devices In-Reply-To: <200601131010.07073.woj(a)tstd.pl> References: <200601131010.07073.woj(a)tstd.pl> Message-ID: <200601131046.23651.woj(a)tstd.pl> On Friday 13 January 2006 10:10, Wojciech Kozicki wrote: > Hello, > > anybody was successful monitoring Alcatel switches in NAV? (for example > X590), especially in cricket? To be more specific, these are Xylan devices branded by Alcatel. Where I should put xylan mibs to make NAV support it? regards -- Woj >From woj at tstd.pl Fri Jan 13 11:02:10 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Fri Jan 13 11:02:39 2006 Subject: [Nav-users] logger.conf In-Reply-To: <200601131012.01521.woj(a)tstd.pl> References: <200601041459.11900.woj(a)tstd.pl> <200601131012.01521.woj(a)tstd.pl> Message-ID: <200601131102.11342.woj(a)tstd.pl> On Friday 13 January 2006 10:12, Wojciech Kozicki wrote: > On Wednesday 04 January 2006 14:59, Wojciech Kozicki wrote: > > Hello, > > > > how should be cisco box configured to have correct analyse in NAV Syslog > > Analyzer? > > > > I have cisco communicates in following format: > > > > Jan 4 14:50:47 <router_name> 2951: Jan 4 13:50:46: %SYS-5-CONFIG_I: > > Configured from console by vty0 (<ip>) > > > > I can see this communicates in NAV, but only in: > > https://nav_ip/logger/?error ("parsing errors" link) > > I still have this problem, can anybody help? Which log I should check? > Hello again, can anybody show mi a properly classified (in NAV-logger) cisco-log line? Maybe this is format problem, some extra parameters I have in my cisco config - for example timestamp. thanks -- Woj >From morten.vold at ntnu.no Fri Jan 13 11:11:22 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 11:11:14 2006 Subject: [Nav-users] logger.conf In-Reply-To: <200601041459.11900.woj(a)tstd.pl> References: <200601041459.11900.woj(a)tstd.pl> Message-ID: <43C77CCA.5020301(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 04/01/2006 14:59, Wojciech Kozicki uttered: > how should be cisco box configured to have correct analyse in NAV Syslog > Analyzer? I'm sorry to say that the syslog analyzer is an ill conceived subsystem of NAV, and it is debated whether it belongs there or not. The developer that wrote it no longer works on the project, and hardly anyone I know of cares to use it (most sysadmins I know prefer to grep the log files manually). With regards to your actual question, I have no idea about the required format. Cisco equipment at NTNU still logs to our NAV 2 installation, and the syslog analyzer har been rewritten from scratch in NAV 3. - From what I can see, our logs look something like this: Jan 13 11:03:48 <router_name> 370245: Jan 13 11:03:52: %SEC-6-IPACCESSLOGP: list vlan18out denied udp <ip1>(50186) -> <ip2>(427), 1 packet What I do know, is that your logger.conf must point to the actual log file to pick up the log lines from. The default is /usr/local/nav/var/log/cisco.log, which means your syslog daemon must be configured to write log entries from external hosts to this file (or configure a different file name). The logengine cron job runs every minute to dump new entries from this file into the database. I also believe logengine will truncate the log file after it has been read. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx3zKXxIl0kpcOkQRAiuGAKDpLWmxswuK2raIQCRS9iqDlp0MlQCdGFXg Aa2aflR3AyWhZmoaUAXiCbU= =gv6K -----END PGP SIGNATURE----- >From woj at tstd.pl Fri Jan 13 11:20:39 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Fri Jan 13 11:21:05 2006 Subject: [Nav-users] logger.conf In-Reply-To: <43C77CCA.5020301(a)ntnu.no> References: <200601041459.11900.woj(a)tstd.pl> <43C77CCA.5020301(a)ntnu.no> Message-ID: <200601131120.39752.woj(a)tstd.pl> On Friday 13 January 2006 11:11, Morten Vold wrote: > On 04/01/2006 14:59, Wojciech Kozicki uttered: > > how should be cisco box configured to have correct analyse in NAV Syslog > > Analyzer? > > I'm sorry to say that the syslog analyzer is an ill conceived subsystem > of NAV, and it is debated whether it belongs there or not. The > developer that wrote it no longer works on the project, and hardly > anyone I know of cares to use it (most sysadmins I know prefer to grep > the log files manually). Well, I am a console person :) But I thin that Logger module is really usefull, sometimes clicking is not so good... > With regards to your actual question, I have no idea about the required > format. Cisco equipment at NTNU still logs to our NAV 2 installation, > and the syslog analyzer har been rewritten from scratch in NAV 3. > > From what I can see, our logs look something like this: > > Jan 13 11:03:48 <router_name> 370245: Jan 13 11:03:52: > %SEC-6-IPACCESSLOGP: list vlan18out denied udp <ip1>(50186) -> > <ip2>(427), 1 packet Thank You for this info. > What I do know, is that your logger.conf must point to the actual log > file to pick up the log lines from. The default is > /usr/local/nav/var/log/cisco.log, which means your syslog daemon must be > configured to write log entries from external hosts to this file (or > configure a different file name). The logengine cron job runs every > minute to dump new entries from this file into the database. I also > believe logengine will truncate the log file after it has been read. This works ok, because nav has got my logs, but it puts them into error table. regards - Woj >From morten.vold at ntnu.no Fri Jan 13 11:45:07 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 11:45:00 2006 Subject: [Nav-users] Again? In-Reply-To: <200601061309.18822.woj(a)tstd.pl> References: <200601061309.18822.woj(a)tstd.pl> Message-ID: <43C784B3.8030303(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 06/01/2006 13:09, Wojciech Kozicki uttered: > There is so many threads without answers... What about "2006 NAV > activity" ? > > I don want to be pain in the a... , but please, write more help-files > or increase mailing list activity. > > Thank You, and please, no offense, I just want to be happy nav-user > ;) I'm sorry you feel this way, and I realize this is a problem. I feel I must comment on the state of NAV development. The history of NAV up to 2004 can be found here: http://metanav.ntnu.no/moin.cgi/HistoryOfNAV The point is, more than 90% of the code in NAV has been developed by NTNU employees, mostly part-time students. UNINETT have contributed the AlertEngine and AlertProfiles (and about 50% of the financial funding since 2001), while an extremely tiny portion consists of voluntary contributions from third parties. The net result of NTNU having used mostly part-time employees to develop NAV, is that most of them are gone now, and their knowledge with them. As of today, I'm the only active NAV developer left (being a full-time employee at NTNU). John-Magne Bredal is also a full-time employee here, but he mostly maintains the code he has contributed earlier (being our Cricket/RRD expert, and author of the new Arnold subsystem). Also, you'll see Kristian Eide pop by with some helpful comments now and then (being the author of the entire collection and event systems), but he works full-time for an unrelated company now. I try to keep this mailing list going, but unfortunately, it is impossible for me to know every little wrinkle and oddity of NAV. I rely on the kind help of people like Kristian and John-Magne. They don't really work that much with NAV anymore, so they cannot always be expected to help. Since my current boss prioritizes my other assignments, I don't always have the time to figure out the intricate issues that people ask for help for on this list, when I don't already know the answer up front. On to the good news: The past year, NAV activity has been miniscule, mostly due to NTNU focusing on other projects. UNINETT aren't quite satisfied with this, as they see NAV as a strategic advantage. As Vidar Faltinsen has announced on this list, UNINETT will invest quite a lot in NAV this year (and the coming years), to put development and support back on track. Among the things I expect UNINETT to fix, is improved stability and documentation (which, by now, must the the most requested "features" by UNINETT customers). And of course, they plan to implement new features as well :) Most importantly, NAV is free software. If you wish to contribute, it is very much appreciated. Anything helps - code, documentation - you name it. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx4SzXxIl0kpcOkQRAn5hAJ0dhM+2/4+7VrBW0dZadVFEiE/t4wCghn2t 14BZ0GpOnpnLOSsW0fbgljw= =zt9/ -----END PGP SIGNATURE----- >From gro-anita.vindheim at ntnu.no Fri Jan 13 12:31:20 2006 From: gro-anita.vindheim at ntnu.no (Gro-Anita Vindheim) Date: Fri Jan 13 12:31:14 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <1087.129.240.76.159.1137055274.squirrel(a)webmail.uio.no> References: <200601100953.k0A9rrTV049797(a)dis.cc.uit.no> <Pine.LNX.4.64.0601120025060.13344(a)tyholt-ng.uninett.no> <1087.129.240.76.159.1137055274.squirrel(a)webmail.uio.no> Message-ID: <43C78F88.10308(a)ntnu.no> Kjetil Otter Olsen wrote: > - Differenciate between anonymous (not logged in) users and > users that have been authenticated (but have no privileges) Have you tried editing privileges in the user admin view ? At NTNU, Morten has made a "Authenticated Users (logged in)" group, and this group has been given basic privileges (such as access to the preferences page etc). All logged in users are by default a member in this group. I'm sure Morten can provide you with the SQL needed. > - A system to check that all NAV-processes are up and running > (and doing what they are supposed to do) I've made a small script that does a diff between a previous "NAV status" (/usr/local/nav/bin/nav status) and the current one. It runs in the "cron system" provided by NAV (I guess Morten can give a link to documentation of the nav status/start/stop system, and how to add local cron jobs). I can send a copy to the list if anyone is interested. Peder Magne Sefland also mentioned in a mail to this list a few weeks back that he has done something similar. Gro-Anita >From morten.vold at ntnu.no Fri Jan 13 12:44:03 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 12:43:57 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <43C78F88.10308(a)ntnu.no> References: <200601100953.k0A9rrTV049797(a)dis.cc.uit.no> <Pine.LNX.4.64.0601120025060.13344(a)tyholt-ng.uninett.no> <1087.129.240.76.159.1137055274.squirrel(a)webmail.uio.no> <43C78F88.10308(a)ntnu.no> Message-ID: <43C79283.3000606(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 13/01/2006 12:31, Gro-Anita Vindheim uttered: > At NTNU, Morten has made a "Authenticated Users (logged in)" group, > and this group has been given basic privileges (such as access to the > preferences page etc). All logged in users are by default a member > in this group. I'm sure Morten can provide you with the SQL needed. Correction: I have checked in such a feature to the Subversion trunk, and NTNU happens to use a recent trunk revision of NAV. Merely executing some SQL on a NAV 3.0 installation won't cut it, you need to upgrade to bleeding edge code from trunk, or wait for NAV 3.1. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx5KDXxIl0kpcOkQRAoubAKC8rPrfx1bQ8k4y7g5TSlZKFMV/7ACg8RlU 6D2gnsQxZK3GinkIwj2EZro= =VAvC -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Fri Jan 13 12:49:06 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 12:48:59 2006 Subject: [Nav-users] Errors when trying to make NAV on a Gentoo system with blackdown-jdk/jre In-Reply-To: <WorldClient-F200601071038.AA38330001(a)witelcom.com> References: <WorldClient-F200601071038.AA38330001(a)witelcom.com> Message-ID: <43C793B2.7010802(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 07/01/2006 10:38, Evert Meulie uttered: > When trying to make NAV on this system, I get the following error(s): [...] > compile: > [javac] Compiling 3 source files to /root/nav-3.0.0/src/SimpleSnmp/build > [javac] > /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:36: > package snmp does not exist > [javac] import snmp.*; > [javac] ^ Unfortunately, there is little documentation on what is needed to build NAV from source. The problem here seems to be that you're missing the JavaSNMP library (whereas NAV was previously dependent on the WestHawk Java SNMP stack). I've made an attempt at documenting this requirement a little better on the metanav site now. What you need to download JavaSNMP 1.4 from this site: http://gicl.cs.drexel.edu/people/sevy/snmp/ Unpack, build and then install JavaSnmp.jar somewhere on your Java classpath. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx5OyXxIl0kpcOkQRAsJLAKDmPpTVt+ywvuW5CH1LkXtinMvxLQCfVZ/d 5f5kNUSeAbTzYHEIY37V05o= =auTA -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Fri Jan 13 13:05:10 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 13:05:03 2006 Subject: [Nav-users] Router down, but no notification. In-Reply-To: <002a01c6154d$c5a27020$6500a8c0@llewdislappy> References: <002a01c6154d$c5a27020$6500a8c0@llewdislappy> Message-ID: <43C79776.7080606(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 09/01/2006 19:51, Joshua Sidwell uttered: > We are using Nav 3.0, and have a router that we monitor that went > down on Friday night, and found out about it this morning when the > remote location called. I am currently setup to receive notification > on any box down, and received nothing via e-mail. Additionally, we > monitor 24/7 on the Traffic Map, but it never showed the device as > down/unreachable. What debug info would help troubleshoot this > problem? What configuration settings can I verify to make sure this > box is configured correctly? I've never heard of anyone using the traffic map for status monitoring before, so I cannot exactly speak of it's reliability in that area. You should check with your IP Device Center whether there were any boxState alerts in the last 7 days for this box (Go to http://yournavhost/report and enter the box name or IP in the first form field there). Most importantly, box state changes are monitored by the pping backend process. If this process isn't running, NAV won't know what's up and what's down. Check the output of the "nav status" command, make sure pping is up (and everything else for that matter - the only exceptions are processes you've disabled by choice). - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx5d1XxIl0kpcOkQRAjwAAJ94baVu5DHUqy4ptXu9zh6zYyKILgCeJKss r4VEfLg+ylLdcINNupcS+Kg= =2R1Q -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Fri Jan 13 13:11:21 2006 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Jan 13 13:11:14 2006 Subject: [Nav-users] Trouble with editdb and UTF-8 In-Reply-To: <20060110215953.Q68239(a)duke.cc.uit.no> References: <20060110215953.Q68239(a)duke.cc.uit.no> Message-ID: <43C798E9.5020706(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 10/01/2006 22:01, Borge Brunes uttered: > It's working OK, but I have one issue with editdb. When > I add some (not all) devices I got this message: How did you add them? Bulk import? If so, where did the bulk file come from, did you generate it from the dump script or write it by hand? > ProgrammingError: ERROR: invalid UTF-8 byte sequence detected near byte > 0xa6 > select deviceid,productid from device where serial='TSC072200EF' or > serial='TSC072200EF' or serial='SAL0723EGL7' or serial='SAL0724ES3J' or Ok, first off: Yuck, ugly SQL, bad editdb! ;) > serial='0402072350198996' or serial='0402072342552745' or serial=' ??!,' The serial number ' ??!,' looks kind of suspicious, if you ask me. So do several others in the list. Again, it comes back to your bulk import file and what it contained. May I see it? > I know that the encoding-consistency for Unicode has been tightened > down in postgres 8.1: > http://archives.postgresql.org/pgsql-hackers/2005-10/msg00972.php Yep, that is probably what triggers the error, question is still what the input actually was. Editdb will interpret everything fed to it as UTF-8 (at least if that's what your browser indicates), but if your actual input contains invalid UTF-8 characters, editdb won't know. - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDx5jpXxIl0kpcOkQRAiwGAJ9f1YxCpTNtO4ZfsuZqriFWmgSNYACfft4r y2rORQdN+zkiZ4UaV50dCGs= =L7qh -----END PGP SIGNATURE----- >From evert at witelcom.com Fri Jan 13 13:19:57 2006 From: evert at witelcom.com (Evert Meulie) Date: Fri Jan 13 13:19:56 2006 Subject: [Nav-users] Errors when trying to make NAV on a Gentoo system with blackdown-jdk/jre In-Reply-To: <43C793B2.7010802(a)ntnu.no> References: <WorldClient-F200601071038.AA38330001(a)witelcom.com> <43C793B2.7010802(a)ntnu.no> Message-ID: <43C79AED.7040005(a)witelcom.com> Thanks! :-) That got me a bit further. Now crashing at: Building webapps/navAdmin ... (cd webapps/navAdmin && /usr/bin/ant ) && touch webapps/navAdmin Buildfile: build.xml BUILD FAILED /root/nav-3.0.0/src/webapps/navAdmin/build.xml:163: taskdef class org.apache.catalina.ant.DeployTask cannot be found Total time: 0 seconds make[1]: *** [webapps/navAdmin] Error 1 make[1]: Leaving directory `/root/nav-3.0.0/src' make: *** [all] Error 1 Regards, Evert Morten Vold wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 07/01/2006 10:38, Evert Meulie uttered: > >> When trying to make NAV on this system, I get the following error(s): > [...] >> compile: >> [javac] Compiling 3 source files to /root/nav-3.0.0/src/SimpleSnmp/build >> [javac] >> /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:36: >> package snmp does not exist >> [javac] import snmp.*; >> [javac] ^ > > Unfortunately, there is little documentation on what is needed to build > NAV from source. The problem here seems to be that you're missing the > JavaSNMP library (whereas NAV was previously dependent on the WestHawk > Java SNMP stack). I've made an attempt at documenting this requirement > a little better on the metanav site now. > > What you need to download JavaSNMP 1.4 from this site: > http://gicl.cs.drexel.edu/people/sevy/snmp/ > > Unpack, build and then install JavaSnmp.jar somewhere on your Java > classpath. > > > - -- > Morten Vold, ITEA, NTNU > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.1 (MingW32) > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org > > iD8DBQFDx5OyXxIl0kpcOkQRAsJLAKDmPpTVt+ywvuW5CH1LkXtinMvxLQCfVZ/d > 5f5kNUSeAbTzYHEIY37V05o= > =auTA > -----END PGP SIGNATURE----- > >

1 0

dns-mismatch
by kreide＠gmail.com 12 Jan '06

12 Jan '06

> >I can tell you which line to change in the source code if > >you want to try. > Yes please In MibIISw.java, change line 275 from: if (!nb.getSysname().startsWith(netboxSysname)) { to: if (!nb.getSysname().trim().toLower().startsWith(netboxSysname.trim().toLower())) { Then recompile gDD and let me know if it helps. -- Kristian

1 0

SV: Re: [Nav-users] dns-mismatch
by peder.sefland＠hivolda.no 12 Jan '06

12 Jan '06

Thank you for your respond. It is more a general problem. Infact I have to tune my alertprofile to filter out dns-mismatch. >I can tell you which line to change in the source code if >you want to try. Yes please Does this dns-match have anything with the fact that boxes I have registred in DNS turn up under parsing errors in the Syslog Analyzer. And boxes that I have not registred turn up right in the Syslog Analyzer. Peder >>> Kristian Eide <kreide(a)gmail.com> 11.01.2006 18:33:56 >>> > As we see the sysname is without the domain-name. Do I have to rename > all my boxes to include domain-name? No. The check which is being done here is if the DNS name of the IP (sysname field in netbox table) starts with the collected sysname from the device. That said, it does seem a bit strange that the above will give a dnsMismatch error. The string "volda-XXX.hivolda.no" does indeed start with "volda-XXX". Do you get this error only for this particular device or is it a more general problem? There could potentially be a whitespace issue which throws off the check, but that is at least very easy to fix (I can tell you which line to change in the source code if you want to try). -- Kristian >From roger.kristiansen at cc.uit.no Thu Jan 12 11:16:37 2006 From: roger.kristiansen at cc.uit.no (Roger Kristiansen) Date: Thu Jan 12 11:16:48 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <1087.129.240.76.159.1137055274.squirrel(a)webmail.uio.no> References: <200601100953.k0A9rrTV049797(a)dis.cc.uit.no> <Pine.LNX.4.64.0601120025060.13344(a)tyholt-ng.uninett.no> <1087.129.240.76.159.1137055274.squirrel(a)webmail.uio.no> Message-ID: <43C62C85.7010201(a)cc.uit.no> Kjetil Otter Olsen wrote: >- A more generic RADIUS-module to match 802.1x user-login to IP-address > and port switch-port > > We made something like this at UiT? last year, and I think it will be included in NAV some time in the future. If you want to try it out before it is included, I can send it to you? It would be nice to see if anyone else can get it running! - Roger >From Borge.Brunes at cc.uit.no Thu Jan 12 11:54:27 2006 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Thu Jan 12 11:54:35 2006 Subject: [Nav-users] getBoksMacs.sh and java.lang.NullPointerException In-Reply-To: Message from Kristian Eide <kreide(a)gmail.com> <b4c110fd0601111020w6862674ek60e23e4491f395ea(a)mail.gmail.com> Message-ID: <200601121054.k0CAsRDF086647(a)duke.cc.uit.no> kreide(a)gmail.com said: > java.lang.NullPointerException > at QueryBoks.processMacEntry(QueryBoks.java:917) > How could I debug this? > The fix is to change line 917 in that file from: > if (macVlan.size() == 0) continue; > To: > if (macVlan == null || macVlan.size() == 0) continue; > I can check this into svn later. Yes! It fixed the problem. Thanks. B?rge

1 0

Feature requests anyone?
by Vidar.Faltinsen＠uninett.no 12 Jan '06

12 Jan '06

On Tue, 10 Jan 2006, Ingeborg Hellemo wrote: > > Vidar.Faltinsen(a)uninett.no said: >> We are currently working on a list of new features to implement. I could >> present the list, but at this stage I will rather ask the NAV community... >> what do you want? > > > > The University og Troms? now proudly presents their wish list: > > (Well Vidar, you asked for it...) Thank you, Ingeborg! Your input is of great value. In most cases I agree. Let's go ruby! > Programming/packaging style: > > * Fewer languages We will not introduce new languages. And - I see yoir point (hard to miss). > * Please make today's features work before you put all your resources on new > features. We will - this is important. I will not comment on all the details for now. > Best wishes for the new NAV year... Thank you, and the same! - Vidar >From kjetil.olsen at usit.uio.no Thu Jan 12 09:41:14 2006 From: kjetil.olsen at usit.uio.no (Kjetil Otter Olsen) Date: Thu Jan 12 09:41:21 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <Pine.LNX.4.64.0601120025060.13344(a)tyholt-ng.uninett.no> References: <200601100953.k0A9rrTV049797(a)dis.cc.uit.no> <Pine.LNX.4.64.0601120025060.13344(a)tyholt-ng.uninett.no> Message-ID: <1087.129.240.76.159.1137055274.squirrel(a)webmail.uio.no> We have had a local "brainstorming" here at UiO and we have come up with a couple of things and sorted them into three categories. The first feature-category is to get things already in NAV3 operational :-) In this category we have the following issues: - vlanplot is unstable, especially the buttons controlling moves and updates tend to disappear now and then.. - we also see that vlanplot behaves quite different in different browsers, this is quite annoying for those of us using multiple platforms And of course the stuff that I have already posted to the list (on January 4th, without any response so far...) The second feature-category is genuine new features; - Use of SNMPv2 counters (also mentioned before, but not there yet...) - Better "group-functionality" regarding users, sub-groups etc (and of course be able to restrict access on group basis) - Differenciate between anonymous (not logged in) users and users that have been authenticated (but have no privileges) - A system to check that all NAV-processes are up and running (and doing what they are supposed to do) - A more generic RADIUS-module to match 802.1x user-login to IP-address and port switch-port - Add a hook in the alarmmodule to be able to run an external script when an alarm occurs (to be able to export alarms to other systems like Tivoli Enterprise Console). This was implemented in one of the RCs, but did not get into the final version. The third feature-category is more exotic, something for NAV7 or so I guess; - Extract and Open the "event-engine" of NAV to make it usable as a generic standalone eventhandler og alarm-console. This is just a few words from our brainstorming. Please ask for more details if needed!!! --Kjetil

1 0

getBoksMacs.sh and java.lang.NullPointerException
by Borge.Brunes＠cc.uit.no 11 Jan '06

11 Jan '06

Everytime getBoksMacs.sh run I got this message: Subject: Cron <navcron@localhost> $BINDIR/getBoksMacs.sh $NUM_THREADS java.lang.NullPointerException at QueryBoks.processMacEntry(QueryBoks.java:917) at QueryBoks.run(QueryBoks.java:264) How could I debug this? regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

2 1

dns-mismatch
by peder.sefland＠hivolda.no 11 Jan '06

11 Jan '06

I have a problem with dns-mismatch. In the eventEngine.log I find these messages Jan 11 13:03:32 2006 eventEngine DEV_DB-6-POSTALERT Posting alert: e=158929 d=19 n=19 t=info s=x [dnsname=volda-XXX.hivolda.no] [sysname=volda-XXX] [alerttype=dnsMismatch] As we see the sysname is without the domain-name. Do I have to rename all my boxes to include domain-name? Peder >>> Peder Magne Sefland 04.01.2006 22:18:50 >>> > Do you have any false alerts on dns-mismatch? I'm not shure that this > has anything to do with this. > > All device names are resolved correctly, beacuse all hostname informations are in NAV machine /etc/hosts file. -- Woj Is this how it should work? I have thought that my colleagues at computer-dep. only needs to registrer their servers or wireless in the web-interface, but not to edit /etc/host file on the nav-box. Peder >From Borge.Brunes at cc.uit.no Wed Jan 11 14:55:58 2006 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Wed Jan 11 14:56:05 2006 Subject: [Nav-users] dns-mismatch In-Reply-To: Message from "Peder Magne Sefland" <peder.sefland(a)hivolda.no> of "Wed, 11 Jan 2006 13:57:39 +0100." <s3c50ee4.069(a)HVO-3.hivolda.no> Message-ID: <200601111355.k0BDtwBZ077079(a)duke.cc.uit.no> peder.sefland(a)hivolda.no said: > I have a problem with dns-mismatch. In the eventEngine.log I find these > messages > Jan 11 13:03:32 2006 eventEngine DEV_DB-6-POSTALERT Posting alert: e=158929 > d=19 n=19 t=info s=x [dnsname=volda-XXX.hivolda.no] [sysname=volda-XXX] > [alerttype=dnsMismatch] > As we see the sysname is without the domain-name. Do I have to rename all my > boxes to include domain-name? No, just use "ip domain-name hivolda.no" on your IOS-switches, or "set system name volda-XXX.hivolda.no" (cat-os) regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

2 1

Feature requests anyone?
by kreide＠gmail.com 11 Jan '06

11 Jan '06

> I think we have tried everything except the sacrifice of a virgin goat by > midnight. We still have a data collector running with only one thread that > crashes too often to be comfortable with. A freebsd-compiled Kaffe should not just crash, and if it does it should be able to debug it like any other C program (turn on debug logging in Kaffe, inspect the core dump file, run it in the debugger etc). Especially after we switched to the java-snmp package my hope is that we should not have any dependencies which precludes Kaffe from working. > Our main problem with Java is that we have not enough knowledge about the > language to be at any help with debugging. Hence the wish for something more > familiar and with more FreeBSD support. This is the one valid argument against Java I can agree to; unfortunately sysadmin people do not have much experience with Java, despite my opinion that Java is very appropriate for this kind of back-end work. Hopefully Morten will be able to assist a lot more this year if he starts working on NAV full-time. -- Kristian

1 0

Trouble with editdb and UTF-8
by Borge.Brunes＠cc.uit.no 11 Jan '06

11 Jan '06

I did a fresh install of NAV on a new server running FreeBSD 6.0 (I'm testing a new NAV-port) with postgres version 8.1.2 It's working OK, but I have one issue with editdb. When I add some (not all) devices I got this message: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 463, in editPage outputForm,action) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 2323, in add box.getDeviceId() File "/usr/local/nav/apache/webroot/editdb/initBox.py", line 172, in getDeviceId handle.execute(sql) ProgrammingError: ERROR: invalid UTF-8 byte sequence detected near byte 0xa6 select deviceid,productid from device where serial='TSC072200EF' or serial='TSC072200EF' or serial='SAL0723EGL7' or serial='SAL0724ES3J' or serial='SAL081231FM' or serial='SAD074205GH' or serial='SAD054901Y2' or serial='SAD070602XN' or serial='TSC072200EF' or serial='TSC072200EF' or serial='ART07080201' or serial='ART0708021F' or serial='SMT0718B638' or serial='SMT0717E960' or serial='SMT0718B178' or serial='SMT0719A419' or serial='SMT0719A658' or serial='SAL0723EGL7' or serial='SAD072500EC' or serial='53P20860004N5 ' or serial='0304041111522442' or serial='0402072351382736' or serial='0301180923529392' or serial='0402072350198996' or serial='0402072342552745' or serial=' ??!,' or serial='0110090723375165' or serial='0110102236193275' or serial='0109251314313648' or serial='0408190153253929' or serial='0408142032151214' or serial='0502031302311622' or serial='0109252054240475' or serial='0404102131298442' or serial='SAL0724ES3J' or serial='SAD072400X2' or serial='23L3337006PP5 ' or serial='0402072351156706' or serial='0402072342477730' or serial='0402072348095458' or serial='0404101237444069' or serial='53P20860004RL ' or serial='"?]?' or serial='0404101234484655' or serial='0402072349401982' or serial='0402072342279079' or serial='0110221752152448' or serial='0402072342405113' or serial='SAL081231FM' or serial='0109251545455076' or serial='0402072349174124' or serial='0402072348587844' or serial='0402072351457995' or serial='0402072351520962' or serial='0404030400310757' or serial='0404030349531186' or serial='0404101236580442' or serial='0404101224508999' or serial='0404101209525423' or serial='0404030401209314' or serial='0404030357555556' or serial='0404030400194397' or serial='0404030359569002' or serial='0406010029209883' or serial='0408162112586079' or serial='SAD074205GH' or serial='SAD074200KC' or serial='SAD074105GC' or serial='SAD054901Y2' or serial='SAD070602XN' (the device is a c6509) It's a fresh database and it looks like editdb tries to put non-UTF-8 characters into the database? A bug? I know that the encoding-consistency for Unicode has been tightened down in postgres 8.1: http://archives.postgresql.org/pgsql-hackers/2005-10/msg00972.php regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

3 2

Feature requests anyone?
by kreide＠gmail.com 10 Jan '06

10 Jan '06

> * Less JAVA > The first language we would like to say goodbye (and good riddance!) to is > Java. It is a PIA to get to work on FreeBSD and a problem for all platforms to > configure and get all paths etc. correct. Of course you still need Java for > visualisation, but for the data collector we would like to see threaded python > or even C as this would be more portable and easyer to maintain. I do not think this is realistic given how much of NAV is currently implemented in Java, however, it is not inherently evil. Getting the paths (I assume you mean the classpath) correct is the same issue you would have even with C and shared libraries and thus is more of a packaging issue. What we could do here is simply package all dependencies in the same .jar file as the main program and then there would be no need to have a classpath at all. This would make it more difficult to upgrade individual components, however, which is why we have not done so already. I am sure a better solution for FreeBSD can be found though. Did you ever try getting NAV to work with Kaffe? -- Kristian

1 0

Router down, but no notification.
by jsidwell＠perisys.net 09 Jan '06

09 Jan '06

We are using Nav 3.0, and have a router that we monitor that went down on Friday night, and found out about it this morning when the remote location called. I am currently setup to receive notification on any box down, and received nothing via e-mail. Additionally, we monitor 24/7 on the Traffic Map, but it never showed the device as down/unreachable. What debug info would help troubleshoot this problem? What configuration settings can I verify to make sure this box is configured correctly? Joshua Sidwell >From Ingeborg.Hellemo at cc.uit.no Tue Jan 10 10:53:53 2006 From: Ingeborg.Hellemo at cc.uit.no (Ingeborg Hellemo) Date: Tue Jan 10 10:54:00 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: Your message of "Wed, 04 Jan 2006 14:01:44 +0100." <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> Message-ID: <200601100953.k0A9rrTV049797(a)dis.cc.uit.no> Vidar.Faltinsen(a)uninett.no said: > We are currently working on a list of new features to implement. I could > present the list, but at this stage I will rather ask the NAV community... > what do you want? The University og Troms? now proudly presents their wish list: (Well Vidar, you asked for it...) ----- Programming/packaging style: * Fewer languages NAV of today is dependent of almost every scripting language known to man, except ruby (oops, I shouldn't have said that!). Please make sure that new features does not involve more languages and small packages (which must be of exactly version x.y-rc2) only found on obscure and badly connected websites. * Less JAVA The first language we would like to say goodbye (and good riddance!) to is Java. It is a PIA to get to work on FreeBSD and a problem for all platforms to configure and get all paths etc. correct. Of course you still need Java for visualisation, but for the data collector we would like to see threaded python or even C as this would be more portable and easyer to maintain. ----- Features: * Please make today's features work before you put all your resources on new features. * Please implement the features we have lost from earlier versions of NAV and the features you have promised us for the last years before you put all your resources on new features. Some of the things we have noticed: * The world is down NAVv3 does not recognice that it has lost connection to its switch and wrongly reports this as "the world is down!" * Alert profile - Filters based on "Sub category" does not work. - Double messages/sms-es are sent out - Need more documentation * Better sms-handling. We loose messages today during large outages. * Traffic map - Same problems as reported by others * cricket - We miss the zoom-in function fram NAVv2. Perhaps this is just a FreeBSD-loss, but we would really like this integrated into the main cricket-package so that we can upgrade cricket at will without having to wait for a NAV-patch. * Larger fields in some database tables (we have problems with 'room' and 'location') ----- When you have done all this we would please like to have: * Support for boxes that NTNU does not use (i.e. 3750) and stacked switches. * Support for weatherducks. * Better handling of modules * System for receiving alerts (and generating alarms) from other systems i.e. snmptraps, email, syslog. * Support for data collection via http, telnet/ssh from systems that does not support snmp. * Snapshot view of VLAN, duplex etc. of a port/interface * cricket - Better cricket-integration for servers and UPS-es (and wireless). What we want is makecricketconfig.pl to automatic update a cricket-subtree for these devices. - sorted load statistics * Better support for threshholds (responce time, filling of disks, cpu load etc.) * We want to set individual threshholds for when a box/service is registered as down. (A well connected server is down if unreachable for 1 minute, a server behind a shaky radiolink is down if unreachable for 10 minutes) * Better service monitoring - More services - Take into consideration that a service may have its own IP-address that runs on another server. I.e. box host.uit.no has IP-address 10.10.10.1 The host runs services smtp.uit.no with address 10.10.10.2 and web.uit.no with address 10.10.10.3. I only need _service_ monitoring on the two latter addresses (no need to ping them) and if I put host.uit.no on maintenance I do not want receive alarms about smtp.uit.no or web.uit.no (neither ip-addresses nor services) * Maintenance - Must be able to put a service on maintenance. - Better user interface. - Be able to put "all" boxes and services at a given location on maintenance. * Better "devicemanagement"/"IP Device Center". Should these perhaps merge? When we do a https://nav.uit.no/browse/some_box we also want to see info from devicemanagement like - IOS-version - upgraded when? - register comments about device - etc. * RSS-feed * Possibility to exclude subnet (in a config-file) that we don't want NAV to use. Eg. 127.0.0.1/8 ----- Regarding syslog: Our view is first of all that syslog does not belong in a database. Period. (Prosessed and aggregated information from syslog may be put in a database, but only after you have identified what you are looking for.) Syslog from Cisco is particularly difficult to parse because every type of device has its own syntax, and small configuration changes on the device will result in completely different syntax. This is why today's syslog module in NAV does not work for anyone besides those who implemented the parser. There exist a number of syslog collecting/parsing systems out there, some good, some not so good. To put much effort into implementing syslog collection in NAV is to reinvent the weel. We think it would be better to implement a system that can receive alerts from an external syslog-parsing system. What we would like to see in NAV is the ability to show normal syslog-files with moderate search/grep functionality. We are currently doing som work on this for our helpdesk so they can check the radius-syslog without having access to our main syslogserver. ------ Best wishes for the new NAV year... Ingeborg and B?rge -- Ingeborg ?strem Hellemo -- ingeborg(a)cc.uit.no (Univ. of Troms?, Norway)

1 0

Errors when trying to make NAV on a Gentoo system with blackdown-jdk/jre
by evert＠witelcom.com 07 Jan '06

07 Jan '06

Hi all! When trying to make NAV on this system, I get the following error(s): ************************* (cd SimpleSnmp && /usr/bin/ant ) && touch SimpleSnmp Buildfile: build.xml init: [mkdir] Created dir: /root/nav-3.0.0/src/SimpleSnmp/build compile: [javac] Compiling 3 source files to /root/nav-3.0.0/src/SimpleSnmp/build [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:36: package snmp does not exist [javac] import snmp.*; [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:70: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] private SNMPv1CommunicationInterface comInterface = null; [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:598: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPVarBindList var = null; [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:605: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] var = new SNMPVarBindList(); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:608: cannot resolve symbol [javac] symbol : class SNMPVarBindList [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPVarBindList nextpair = comInterface.getNextMIBEntry(nextoid); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:609: cannot resolve symbol [javac] symbol : class SNMPObject [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObject snmpobj = nextpair.getSNMPObjectAt(0); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:610: cannot resolve symbol [javac] symbol : class SNMPNull [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (snmpobj instanceof SNMPNull) break; [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:611: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)snmpobj; [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:611: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)snmpobj; [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:612: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:612: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:623: cannot resolve symbol [javac] symbol : class SNMPBadValueException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] } catch (SNMPBadValueException exp) { [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:626: cannot resolve symbol [javac] symbol : class SNMPException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] } catch (SNMPException exp) { [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:627: cannot resolve symbol [javac] symbol : class SNMPGetException [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (!(exp instanceof SNMPGetException && exp.getMessage() != null && exp.getMessage().indexOf("not available for retrieval") >= 0)) { [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:651: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)(var.getSNMPObjectAt(i)); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:651: cannot resolve symbol [javac] symbol : class SNMPSequence [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPSequence pair = (SNMPSequence)(var.getSNMPObjectAt(i)); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:652: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:652: cannot resolve symbol [javac] symbol : class SNMPObjectIdentifier [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObjectIdentifier snmpOID = (SNMPObjectIdentifier)pair.getSNMPObjectAt(0); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:653: cannot resolve symbol [javac] symbol : class SNMPObject [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] SNMPObject snmpValue = pair.getSNMPObjectAt(1); [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:657: cannot resolve symbol [javac] symbol : class SNMPOctetString [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (!decodeHex && snmpValue instanceof SNMPOctetString) { [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:663: cannot resolve symbol [javac] symbol : class SNMPOctetString [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] if (data.length() == 0 && !(snmpValue instanceof SNMPOctetString)) { [javac] ^ [javac] /root/nav-3.0.0/src/SimpleSnmp/src/no/ntnu/nav/SimpleSnmp/SimpleSnmp.java:806: cannot resolve symbol [javac] symbol : class SNMPv1CommunicationInterface [javac] location: class no.ntnu.nav.SimpleSnmp.SimpleSnmp [javac] comInterface = new SNMPv1CommunicationInterface(snmpVersion, hostAddress, cs_ro); [javac] ^ [javac] 22 errors BUILD FAILED /root/nav-3.0.0/src/SimpleSnmp/build.xml:30: Compile failed; see the compiler error output for details. Total time: 2 seconds make[1]: *** [SimpleSnmp] Error 1 make[1]: Leaving directory `/root/nav-3.0.0/src' make: *** [all] Error 1 ************************* Does anybody has any suggestions on how to fix? It clearly seems snmp-related...? Regards, Evert

1 0

Cricket error
by kreide＠gmail.com 06 Jan '06

06 Jan '06

> OID key * This is a unique idenitifier for the OID and is used in the source code to refer to that OID. Usually we use some variation of the OID name. > Snmpoid * This is the actual numeric OID. > OID source This field does not have a good name; I it is supposed to be from which subsystem the OID comes from, but I think it is used by cricket to identify the OID that it collects. If the OID source is 'cricket' then cricket will collect data for this OID (JM: correct me if I am wrong). > Match regexp The data collected from an OID must match this regex (if it is not null, in which case everything matches which is the normal case) if data is to be collected. > OID name > MIB > Description These are just description fields. -- Kristian

1 0

Again?
by woj＠tstd.pl 06 Jan '06

06 Jan '06

Hello, There is so many threads without answers... What about "2006 NAV activity" ? I don want to be pain in the a... , but please, write more help-files or increase mailing list activity. Thank You, and please, no offense, I just want to be happy nav-user ;) regards -- Woj >From woj at tstd.pl Fri Jan 6 13:18:58 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Fri Jan 6 13:19:14 2006 Subject: [Nav-users] Again? In-Reply-To: <20060106121512.GA3837(a)itea.ntnu.no> References: <200601061309.18822.woj(a)tstd.pl> <20060106121512.GA3837(a)itea.ntnu.no> Message-ID: <200601061318.59054.woj(a)tstd.pl> On Friday 06 January 2006 13:15, Bjorn Ove Grotan wrote: > Wojciech Kozicki: > > Hello, > > > > There is so many threads without answers... > > > > What about "2006 NAV activity" ? > > It's in the "feature request"-thread - which started the other day. Well, new features... I don't have old-ones working ;-) > > > I don want to be pain in the a... , but please, write more help-files or > > increase mailing list activity. > > > > Thank You, and please, no offense, I just want to be happy nav-user ;) > > Don't we all :-) :-) -- Woj >From kreide at gmail.com Fri Jan 6 09:24:06 2006 From: kreide at gmail.com (Kristian Eide) Date: Fri Jan 6 18:24:18 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <200601050901.26319.woj(a)tstd.pl> References: <200601041322.24818.woj(a)tstd.pl> <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> <200601050901.26319.woj(a)tstd.pl> Message-ID: <b4c110fd0601060924o15754d33l4a597cb037c3257(a)mail.gmail.com> > I have similar problems with one of our 2900 catalyst switch with ATM port, > snmpwalk shows interfaces, nav not. In cricket there is only CPU statistics. > What is the best way to debug such problems? There is a report which shows the snmpoid's a device responds to (or at least NAV thinks it does). If the OID you are looking for is not in the list then NAV will not collect any info for it. The solution then is to get NAV to try to auto-detect the OIDs again, by setting the field 'netbox.uptodate'=false in the database (am I not sure if editDB can do this, however). > What about adding user-specific OIDs? Any help to this nav-section? See other mail. -- Kristian

1 0

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 05 Jan '06

05 Jan '06

On Wednesday 04 January 2006 13:41, Vidar Faltinsen wrote: > On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > > > Missing subinterfaces are on different modules... > > > > What I should check? > > > > MRTG is working with this routers with no problem. > > MRTG has traffic counters for the interfaces that NAV are missing? > > You should verify what the router returns of ifindexes/ifdescr from > the interfaces MIB. I know the support has been varying in respect > to fast/gigethernet-based subinterface support. At one point ios > gave us the ifindexes, but the octet counters were not maintained. > > Do a snmpwalk directly to the router in question, something like: > > snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr > > or > > snmpwalk -On -c <snmp read community> -v2c <ip address> > .1.3.6.1.2.1.2.2.1.2 > I have similar problems with one of our 2900 catalyst switch with ATM port, snmpwalk shows interfaces, nav not. In cricket there is only CPU statistics. Question no1: What is the best way to debug such problems? Question no2: What about adding user-specific OIDs? Any help to this nav-section? regards -- Woj >From odd.hauge at hiMolde.no Thu Jan 5 23:45:36 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Fri Jan 6 00:11:49 2006 Subject: [Nav-users] Problems adding users Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C21B8C17(a)stam.himolde.no> FYI: A recompile of Nav (bleeding edge) solved the problem. Nothings better ;) - odd arne > -----Original Message----- > From: Hauge Odd Arne > Sent: Thursday, January 05, 2006 8:51 AM > To: Hauge Odd Arne; nav-users(a)itea.ntnu.no > Subject: RE: [Nav-users] Problems adding users > > Seems like som postgres problem to me. After trying to add a > new user I did a ps command on the nav-box: > postgres 5836 0.0 2.9 41216 14936 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55524) idle in > transaction > postgres 5850 0.0 3.0 41480 15908 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55530) idle in > transaction > postgres 5852 0.0 2.9 41216 14940 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55532) idle in > transaction > postgres 5856 0.0 2.8 41216 14848 pts/0 S 01:16 > 0:00 postgres: navwrite navprofiles 127.0.0.1(55534) INSERT waiting > > I'm not sure what the idle in transaction and insert waiting means... > It seems to me it's only the navprofiles database I have > problems adding information into. I can not add new accounts > or groups. But I can manage profiles for existing nav users > (read admin user). > > - odd arne hauge > > > > > > > -----Original Message----- > > From: nav-users-bounces(a)itea.ntnu.no > > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Hauge Odd Arne > > Sent: Wednesday, January 04, 2006 3:47 PM > > To: nav-users(a)itea.ntnu.no > > Subject: [Nav-users] Problems adding users > > > > Hi. > > > > While testing the bleeding edge of Nav I'm having problem adding > > users. > > I get the following output in my browser when I tries to add a new > > user: > > "no such account 1000" > > > > Any suggestions ? > > > > Regards > > Odd Arne Hauge > > > > > > _______________________________________________ > > Nav-users mailing list > > Nav-users(a)itea.ntnu.no > > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > >

1 0

SV: Re: SV: [Nav-users] logger.conf
by peder.sefland＠hivolda.no 04 Jan '06

04 Jan '06

> Do you have any false alerts on dns-mismatch? I'm not shure that this > has anything to do with this. > > All device names are resolved correctly, beacuse all hostname informations are in NAV machine /etc/hosts file. -- Woj Is this how it should work? I have thought that my colleagues at computer-dep. only needs to registrer their servers or wireless in the web-interface, but not to edit /etc/host file on the nav-box. Peder >From odd.hauge at hiMolde.no Thu Jan 5 08:50:57 2006 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Jan 5 08:51:06 2006 Subject: [Nav-users] Problems adding users Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C27D128E(a)stam.himolde.no> Seems like som postgres problem to me. After trying to add a new user I did a ps command on the nav-box: postgres 5836 0.0 2.9 41216 14936 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55524) idle in transaction postgres 5850 0.0 3.0 41480 15908 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55530) idle in transaction postgres 5852 0.0 2.9 41216 14940 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55532) idle in transaction postgres 5856 0.0 2.8 41216 14848 pts/0 S 01:16 0:00 postgres: navwrite navprofiles 127.0.0.1(55534) INSERT waiting I'm not sure what the idle in transaction and insert waiting means... It seems to me it's only the navprofiles database I have problems adding information into. I can not add new accounts or groups. But I can manage profiles for existing nav users (read admin user). - odd arne hauge > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Hauge Odd Arne > Sent: Wednesday, January 04, 2006 3:47 PM > To: nav-users(a)itea.ntnu.no > Subject: [Nav-users] Problems adding users > > Hi. > > While testing the bleeding edge of Nav I'm having problem > adding users. > I get the following output in my browser when I tries to add > a new user: > "no such account 1000" > > Any suggestions ? > > Regards > Odd Arne Hauge > > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

1 0

A couple of bugs
by kjetil.olsen＠usit.uio.no 04 Jan '06

04 Jan '06

We have problems when we configure IP-addresses directly on physical interfaces on routers (cisco catalysts or ordinary cisco-routers e.g. 7206) and connect them to switches (we use switches to interconnect several routers). The interfaces are discovered by gdd, but not placed in the correct VLAN even if we use the correct description-field (with VLAN ID) and the VLAN is known to NAV, and the switch is correctly configured with VLAN. This messes up the traffic-map, making it usesless.... (In NAV2 this works like a charm....) I would think that more detailed debugging is needed :-) Contact nett-drift(a)usit.uio.no to get access. And while I'm at it.... A second bug (that I think has been mentioned before, but): The cricket-config does not contain the correct decription-fields on routers. The router is OK, and the "Router ports" report (.../report/gwport) is also OK, but cricket says "No decription available". On switches we do not see this problem, port descriptions show up fine in cricket. I guess that "makecricketconfig" is to blame in one way or another :-) And a third one :-) In the traffic-map I can right-click on a router and get a router-menu. Choosing "Netlist" tryes to access cricket, not the reports.... --Kjetil

2 1

Feature requests anyone?
by kjetil.olsen＠usit.uio.no 04 Jan '06

04 Jan '06

Use of SNMPv2-counters (64-bit) in cricket. We have a number of interfaces that already have problems with interfaces having more than 2^32 bytes pr minute of traffic. --Kjetil

1 0

Feature requests anyone?
by Vidar.Faltinsen＠uninett.no 04 Jan '06

04 Jan '06

Hi, As I mentioned in a previous posting NTNU and UNINETT are currently planning the 2006 NAV activity. We are more ambitious this year and are prepared to put a lot of resources into maintaining and further developing NAV. We are currently working on a list of new features to implement. I could present the list, but at this stage I will rather ask the NAV community... what do you want? We certainly have some ideas ourselves, partly based on feedback, both on- and offline. Nevertheless, please empty your (navish) heart and express your wishes! This is your chance (well, one of them). We are interested in request for both the short and long term. I assume more smooth installation, maybe support for certain equipment types, etc, is on the list. Further - in terms of new and/or improved functionality - what would you like? As NAV is an open source project, contributions are very much welcome. If you have plans or hopes in this respect, please let us know. All input is of value. This includes criticism. Looking forward to this thread! - Vidar >From woj at tstd.pl Wed Jan 4 14:08:58 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:09:16 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> References: <200601041322.24818.woj(a)tstd.pl> <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> Message-ID: <200601041408.59366.woj(a)tstd.pl> On Wednesday 04 January 2006 13:41, you wrote: > On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > > > Missing subinterfaces are on different modules... > > > > What I should check? > > > > MRTG is working with this routers with no problem. > > MRTG has traffic counters for the interfaces that NAV are missing? yes, I am using in mrtg simply: ./cfgmaker <snmp read community>@$<ip address> > mrtg_file.cfg I just checked, mrtg also can't see fast ethernet subinterfaces, but it can see main fast etherent interfaces, and ALL atm subinterfaces. Missing (in NAV) atm interfaces are configured typically. > You should verify what the router returns of ifindexes/ifdescr from > the interfaces MIB. I know the support has been varying in respect > to fast/gigethernet-based subinterface support. At one point ios > gave us the ifindexes, but the octet counters were not maintained. > > Do a snmpwalk directly to the router in question, something like: > > snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr > > or > > snmpwalk -On -c <snmp read community> -v2c <ip address> > .1.3.6.1.2.1.2.2.1.2 > I did it. I can see there missing atm subinterfaces, and fast Ethernet interfaces but no fast ethernet subinterfaces (802.1q). regards, thanks for help -- Woj >From woj at tstd.pl Wed Jan 4 14:16:53 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:17:09 2006 Subject: [Nav-users] Cricket error In-Reply-To: <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BBC1DB.7030408(a)ntnu.no> <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> Message-ID: <200601041416.54494.woj(a)tstd.pl> On Wednesday 04 January 2006 13:47, Kristian Eide wrote: > > I am not sure how to add OID's to NAV without messing with the database, > > perhaps some other NAV-developer may answer this? > > I think editDB has support for adding new OIDs. > Yes, there is, but I can't find descriptions Howto fill form: OID key * Snmpoid * OID source Match regexp OID name MIB Description Can somebody give some detailed info, how to fill these fields, and how will this work with cricket? regards -- Woj >From ddeineka at gmail.com Wed Jan 4 15:39:43 2006 From: ddeineka at gmail.com (Dmitry Deineka) Date: Wed Jan 4 14:39:53 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> References: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> Message-ID: <a6fee5220601040539h59214bc6h(a)mail.gmail.com> So, Happy New Year to all ! I with to say thanks to NAV developers and community for great monitoring/network inventory software (but a bit difficult for install :-) We switch from nagios to NAV for number of reasons: 1) More visualizations 2) More reports 3) Great search functions (per mac, vlan, ports etc). Its really great! What I need with NAV: 1) SNMP trap handling. For example, we have number of small POPs with APC Smart UPS+AP9617 mgmnt cards installed. I wish to monitor power outages within NAV - for our duty staff (much less skilled than noc people :) is better to see one application on screen 2) SNMP polling and thresholds. Is link quality bad ? Is interface load too high or too low ? 3) More FreeBSD support. I think that following message from archive must be on NAV wiki: http://desperados.itea.ntnu.no/pipermail/nav-users/2005-December/001117.html With best regards, Dmitry 2006/1/4, Vidar Faltinsen <Vidar.Faltinsen(a)uninett.no>: > > Hi, > > > We are currently working on a list of new features to implement. > I could present the list, but at this stage I will rather ask the > NAV community... what do you want? > - Vidar > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > -- Dmitry A.Deineka >From woj at tstd.pl Wed Jan 4 14:59:11 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 14:59:31 2006 Subject: [Nav-users] logger.conf Message-ID: <200601041459.11900.woj(a)tstd.pl> Hello, how should be cisco box configured to have correct analyse in NAV Syslog Analyzer? I have cisco communicates in following format: Jan 4 14:50:47 <router_name> 2951: Jan 4 13:50:46: %SYS-5-CONFIG_I: Configured from console by vty0 (<ip>) I can see this communicates in NAV, but only in: https://nav_ip/logger/?error ("parsing errors" link) Thanks for info regards -- Woj >From peder.sefland at hivolda.no Wed Jan 4 15:14:48 2006 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Wed Jan 4 15:15:16 2006 Subject: SV: [Nav-users] logger.conf Message-ID: <s3bbe67d.030(a)HVO-3.hivolda.no> I have experience the same thing. But some of my switches that has only ip-adresse and no dns-name turn up in the Syslog Analyser. All the others turn up under "parsing errors" link. Do you have any false alerts on dns-mismatch? I'm not shure that this has anything to do with this. Peder Sefland >>> Wojciech Kozicki <woj(a)tstd.pl> 04.01.2006 14:59:11 >>> Hello, how should be cisco box configured to have correct analyse in NAV Syslog Analyzer? I have cisco communicates in following format: Jan 4 14:50:47 <router_name> 2951: Jan 4 13:50:46: %SYS-5-CONFIG_I: Configured from console by vty0 (<ip>) I can see this communicates in NAV, but only in: https://nav_ip/logger/?error ("parsing errors" link) Thanks for info regards -- Woj _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >From woj at tstd.pl Wed Jan 4 15:20:18 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Jan 4 15:20:35 2006 Subject: SV: [Nav-users] logger.conf In-Reply-To: <s3bbe67d.031(a)HVO-3.hivolda.no> References: <s3bbe67d.031(a)HVO-3.hivolda.no> Message-ID: <200601041520.19244.woj(a)tstd.pl> On Wednesday 04 January 2006 15:14, Peder Magne Sefland wrote: > I have experience the same thing. But some of my switches that has only > ip-adresse and no dns-name turn up in the Syslog Analyser. All the > others turn up under "parsing errors" link. > > Do you have any false alerts on dns-mismatch? I'm not shure that this > has anything to do with this. > > All device names are resolved correctly, beacuse all hostname informations are in NAV machine /etc/hosts file. -- Woj >From Vidar.Faltinsen at uninett.no Wed Jan 4 15:28:53 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 15:29:12 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <7DA8B65EACA61E4B8DC3FA6668A53E420FF471(a)edxmb3.jdnet.deere.com> References: <7DA8B65EACA61E4B8DC3FA6668A53E420FF471(a)edxmb3.jdnet.deere.com> Message-ID: <Pine.LNX.4.64.0601041525220.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, McDermott Troy wrote: > First off, thank you all very much for creating and maintaining this > software; it's made my job (and life) much easier. ...and life - wow! Thank you! > One little suggestion: a non-cisco syslog module, where syslog output > from devices like UPS, non-cisco switches, and so on could be viewed > through the web interface. Even something simple that would be > searchable with text strings and regexp would be very helpful. Thank you for your input. We will definitely consider this. > Thanks for asking! > > -Troy - Vidar > >> -----Original Message----- >> From: nav-users-bounces(a)itea.ntnu.no >> [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Vidar Faltinsen >> Sent: Wednesday, January 04, 2006 7:02 AM >> To: nav-users(a)itea.ntnu.no >> Subject: [Nav-users] Feature requests anyone? >> >> Hi, >> >> As I mentioned in a previous posting NTNU and UNINETT are >> currently planning the 2006 NAV activity. We are more >> ambitious this year and are prepared to put a lot of >> resources into maintaining and further developing NAV. >> >> We are currently working on a list of new features to implement. >> I could present the list, but at this stage I will rather ask >> the NAV community... what do you want? >> >> We certainly have some ideas ourselves, partly based on >> feedback, both on- and offline. Nevertheless, please empty >> your (navish) heart and express your wishes! This is your >> chance (well, one of them). >> >> We are interested in request for both the short and long term. >> >> I assume more smooth installation, maybe support for certain >> equipment types, etc, is on the list. Further - in terms of >> new and/or improved functionality - what would you like? >> >> As NAV is an open source project, contributions are very much welcome. >> If you have plans or hopes in this respect, please let us know. >> >> All input is of value. This includes criticism. Looking >> forward to this thread! >> >> - Vidar >> _______________________________________________ >> Nav-users mailing list >> Nav-users(a)itea.ntnu.no >> http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >> >> > >From Vidar.Faltinsen at uninett.no Wed Jan 4 15:36:38 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 15:36:48 2006 Subject: [Nav-users] Feature requests anyone? In-Reply-To: <a6fee5220601040539h59214bc6h(a)mail.gmail.com> References: <Pine.LNX.4.64.0601041322380.18181(a)tyholt-ng.uninett.no> <a6fee5220601040539h59214bc6h(a)mail.gmail.com> Message-ID: <Pine.LNX.4.64.0601041529320.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, Dmitry Deineka wrote: > We switch from nagios to NAV for number of reasons: > 1) More visualizations > 2) More reports > 3) Great search functions (per mac, vlan, ports etc). Its really great! Valuable feedback, on behalf of the team, thank you! > What I need with NAV: > 1) SNMP trap handling. For example, we have number of small POPs with APC > Smart UPS+AP9617 mgmnt cards installed. I wish to monitor power outages > within NAV - for our duty staff (much less skilled than noc people :) is > better to see one application on screen This is on our list to. SNMP traps will be implemented. We will also have a particular focus on power, UPS and temperature statistics and alarms. > 2) SNMP polling and thresholds. Is link quality bad ? Is interface load too > high or too low ? On the list, been there (too) long. > 3) More FreeBSD support. I think that following message from archive must be > on NAV wiki: > http://desperados.itea.ntnu.no/pipermail/nav-users/2005-December/001117.html I agree. Will be done. > With best regards, > Dmitry - Vidar

2 1

Problems adding users
by odd.hauge＠hiMolde.no 04 Jan '06

04 Jan '06

Hi. While testing the bleeding edge of Nav I'm having problem adding users. I get the following output in my browser when I tries to add a new user: "no such account 1000" Any suggestions ? Regards Odd Arne Hauge

1 0

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 04 Jan '06

04 Jan '06

On Wednesday 04 January 2006 13:40, you wrote: > Wojciech Kozicki wrote: > > Hello, > > > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > > router-ports report I can see only some of ATM interfaces, but not all. > > Also, there is lack of Fast Etherent interfaces. I tried re-adding device > > to nav, but it didn't help. > > There are (unfortunately) two directories for router-interfaces - > giga-router-interfaces and router-interfaces. Have you checked both? I can't see them in "router ports" report and can't find IP networks which are connected to them in "prefixes" report. Simply - NAV did't detect these interfaces... -- Woj >From kreide at gmail.com Wed Jan 4 13:47:26 2006 From: kreide at gmail.com (Kristian Eide) Date: Wed Jan 4 13:47:36 2006 Subject: [Nav-users] Cricket error In-Reply-To: <43BBC1DB.7030408(a)ntnu.no> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> <200601031026.55728.woj(a)tstd.pl> <43BBC1DB.7030408(a)ntnu.no> Message-ID: <b4c110fd0601040447k55a8ddedp1f28b253ead29847(a)mail.gmail.com> > I am not sure how to add OID's to NAV without messing with the database, > perhaps some other NAV-developer may answer this? I think editDB has support for adding new OIDs. -- Kristian

1 0

Cisco 7140 - nav can't see some of router interfaces
by woj＠tstd.pl 04 Jan '06

04 Jan '06

Hello, I have couple of cisco 7140, and NAV can't see all routers interfaces. In router-ports report I can see only some of ATM interfaces, but not all. Also, there is lack of Fast Etherent interfaces. I tried re-adding device to nav, but it didn't help. Missing subinterfaces are on different modules... What I should check? MRTG is working with this routers with no problem. regards -- Woj >From john.m.bredal at ntnu.no Wed Jan 4 13:38:51 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Wed Jan 4 13:38:02 2006 Subject: [Nav-users] Cricket error In-Reply-To: <200601031026.55728.woj(a)tstd.pl> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> <200601031026.55728.woj(a)tstd.pl> Message-ID: <43BBC1DB.7030408(a)ntnu.no> Wojciech Kozicki wrote: > > I have some additional question, is there way to put some user-specific OIDs > to NAV-Cricket? > For example - I have cisco catalyst 2900 + ATM module, NAV is not recognizing > it correctly, can I put somewhere OIDs to have statistics generated? > > regards > The easiest way would be to add configuration to the Defaults-files in Cricket and make a local directory to collect data to using those OID's. I am not sure how to add OID's to NAV without messing with the database, perhaps some other NAV-developer may answer this? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From john.m.bredal at ntnu.no Wed Jan 4 13:40:32 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Wed Jan 4 13:39:41 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <200601041322.24818.woj(a)tstd.pl> References: <200601041322.24818.woj(a)tstd.pl> Message-ID: <43BBC240.6000303(a)ntnu.no> Wojciech Kozicki wrote: > Hello, > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > router-ports report I can see only some of ATM interfaces, but not all. Also, > there is lack of Fast Etherent interfaces. I tried re-adding device to nav, > but it didn't help. There are (unfortunately) two directories for router-interfaces - giga-router-interfaces and router-interfaces. Have you checked both? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From Vidar.Faltinsen at uninett.no Wed Jan 4 13:41:16 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Wed Jan 4 13:41:23 2006 Subject: [Nav-users] Cisco 7140 - nav can't see some of router interfaces In-Reply-To: <200601041322.24818.woj(a)tstd.pl> References: <200601041322.24818.woj(a)tstd.pl> Message-ID: <Pine.LNX.4.64.0601041333510.18181(a)tyholt-ng.uninett.no> On Wed, 4 Jan 2006, Wojciech Kozicki wrote: > Hello, > > I have couple of cisco 7140, and NAV can't see all routers interfaces. In > router-ports report I can see only some of ATM interfaces, but not all. Also, > there is lack of Fast Etherent interfaces. I tried re-adding device to nav, > but it didn't help. > > Missing subinterfaces are on different modules... > > What I should check? > > MRTG is working with this routers with no problem. MRTG has traffic counters for the interfaces that NAV are missing? You should verify what the router returns of ifindexes/ifdescr from the interfaces MIB. I know the support has been varying in respect to fast/gigethernet-based subinterface support. At one point ios gave us the ifindexes, but the octet counters were not maintained. Do a snmpwalk directly to the router in question, something like: snmpwalk -On -c <snmp read community> -v2c <ip address> ifdescr or snmpwalk -On -c <snmp read community> -v2c <ip address> .1.3.6.1.2.1.2.2.1.2 - Vidar

1 0

no descriptions in Cricket for router ports
by Vidar.Faltinsen＠uninett.no 03 Jan '06

03 Jan '06

On Wed, 28 Dec 2005, Wojciech Kozicki wrote: > Hello, > > my NAV is up and running (installation done by this howto: > http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4). > > I have some problems with Cricket, there is no description for router graphs. > These are cisco 7206, 750x, 7140 boxes. > > Description on routers interfaces are in following format (example): > > interface FastEthernet1/0/0.200 > description elink,xxx_gw,xxx,,200 > > And in "Router ports report", for this port I can see: > - in vlan column: "200" > - in nettype column: "elink" > - in netident: "router_name,xxx_gw" > so it is recognized correctly in NAV... > > For switches - cisco 2900, 2950 there is no problem, all interfaces are > described properly in Cricket. > > What I should check, please help. I assume you refer to the cricket overview page with all the router ports for a given router that states "no description available" in the description column. This issue is addressed and I believe solved, however I do not think it is "out there yet", John Magne can correct me if I am wrong. - Vidar

2 1

Cricket error
by john.m.bredal＠ntnu.no 03 Jan '06

03 Jan '06

kjartan.malde(a)uis.no wrote: > The powersupply on my Nav died, and since I got it back up I get these > messeges every minute. Hope anyone can help me. The messages are coming > from a one of the cards on a Cat6509. I running Nav 3.0 on CentOS. > It seems like the configuration is wrong. Cricket is trying to query an OID that does not exist, in this case the ifInErrors-counter on the various ifindexes seen in the mail. > > Error and the lines leading up to it: > [28-Dec-2005 09:12:07 ] Retrieved data for 9_15 (225): > 166758758,116225181,0,0,1572947,1109513 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_16 (226): > 10068,558308,0,0,16,8370 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_17 (227): > 571765657,1224452921,0,0,3818864,4488386 > [28-Dec-2005 09:12:07 ] Retrieved data for 9_18 (228): > 101553,744762,0,0,589,6513 > [28-Dec-2005 09:12:07*] Received SNMP response with error code noSuchName. > OID: 1.3.6.1.2.1.2.2.1.14.229 > <snip> My guess is that the information in the database was not correct during the last creation of the config (there is one every night), and it should disappear as soon as the database comes up to date. Is the problem still there? -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From john.m.bredal at ntnu.no Tue Jan 3 10:24:05 2006 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Tue Jan 3 10:23:14 2006 Subject: [Nav-users] weird problem In-Reply-To: <200512271957.25492.woj(a)tstd.pl> References: <200512271921.22867.woj(a)tstd.pl> <200512271949.35618.woj(a)tstd.pl> <200512271957.25492.woj(a)tstd.pl> Message-ID: <43BA42B5.6040707(a)ntnu.no> Wojciech Kozicki wrote: <snip> > btw. What should I do with something like this (Nav keeps sending it to my by > email): > > [27-Dec-2005 18:40:03 ] Retrieved data for x.x.1.12 (): > 18,17,19552316,185184868,904658749,19,29 > [27-Dec-2005 18:40:03*] Cannot > update /usr/local/nav/cricket/cricket-config/../cricket-data//routers/x.x.1.12.rrd: > expected 4 data source readings (got 7) from > N:18:17:19552316:185184868:904658749:19:29:... > > x.x.1.12 is 7513 cisco router. > Quoting one of my earlier mails on this list: " Borge Brunes wrote: > Folks, > > I did an upgrade from svn 3290 to 3318, and now these messages > are popping in: > [08-Aug-2005 21:30:34*] Cannot update /usr/local/nav/cricket/cricket-config/../cricket-data//switches/tf4292-sw.infra.uit.no.rrd: expected 5 data source readings (got 4) from N:0:1:40827872:56543441:... > This problem is very common. RRDTool, which Cricket uses to store data, uses rrd-files to store data. These files, once created, does only accept a certain number of data-sets. If you try to insert more or less datasets than it can handle this error will occur. The reason for this is that NAV has detected that tf4292-sw.infra.uit.no can respond to 4 snmp values when it previously responded to 5. When it tries to store only 4 this error occurs. There is no easy/good fix to this. One solution is to delete the rrd-file so that Cricket makes a new one with 4 data-sets. This is the easiest one but will of course delete all historical data. Another solution is to dump all old data, create the new file with 4 sets and insert old data to the new file. This is more complicated though. My dream is to automate this process, but at the moment there is no time. " -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, don't mean they're not after you." >From Vidar.Faltinsen at uninett.no Tue Jan 3 10:25:39 2006 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Tue Jan 3 10:25:45 2006 Subject: [Nav-users] NAV 3.0.0 in Debian? In-Reply-To: <200512271252.39624.woj(a)tstd.pl> References: <200512271252.39624.woj(a)tstd.pl> Message-ID: <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> On Tue, 27 Dec 2005, Wojciech Kozicki wrote: > 1. Will be NAV ported to Debian? Our ambition is definitely to maintain an updated NAV debian package. UNINETT and NTNU are currently planning our 2006 joint activity. There will be a remarkably increase in activity compared to the relatively slow 2005. The primary OS for UNINETT is debian (our so-called samson3 platform). We will make sure the dedian package is maintained and up to date. The current status is that a 3.0 package is in the making, final testing needs to be done. I cannot commit a date for this, as of now, but we are definitely addressing this and other pressing NAV issues. Hang in there. - Vidar >From woj at tstd.pl Tue Jan 3 10:26:54 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Jan 3 10:27:09 2006 Subject: [Nav-users] Cricket error In-Reply-To: <43BA40F0.1010406(a)ntnu.no> References: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> <43BA40F0.1010406(a)ntnu.no> Message-ID: <200601031026.55728.woj(a)tstd.pl> On Tuesday 03 January 2006 10:16, John Magne Bredal wrote: > kjartan.malde(a)uis.no wrote: > > The powersupply on my Nav died, and since I got it back up I get these > > messeges every minute. Hope anyone can help me. The messages are coming > > from a one of the cards on a Cat6509. I running Nav 3.0 on CentOS. > > It seems like the configuration is wrong. Cricket is trying to query an > OID that does not exist, in this case the ifInErrors-counter on the > various ifindexes seen in the mail. > [...] I have some additional question, is there way to put some user-specific OIDs to NAV-Cricket? For example - I have cisco catalyst 2900 + ATM module, NAV is not recognizing it correctly, can I put somewhere OIDs to have statistics generated? regards -- Woj >From woj at tstd.pl Tue Jan 3 10:33:55 2006 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Jan 3 10:34:09 2006 Subject: [Nav-users] NAV 3.0.0 in Debian? In-Reply-To: <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> References: <200512271252.39624.woj(a)tstd.pl> <Pine.LNX.4.64.0601031016190.12104(a)tyholt-ng.uninett.no> Message-ID: <200601031033.55815.woj(a)tstd.pl> On Tuesday 03 January 2006 10:25, Vidar Faltinsen wrote: > On Tue, 27 Dec 2005, Wojciech Kozicki wrote: > > 1. Will be NAV ported to Debian? > > Our ambition is definitely to maintain an updated NAV debian package. > UNINETT and NTNU are currently planning our 2006 joint activity. There > will be a remarkably increase in activity compared to the relatively > slow 2005. It is really great to hear it! Nav is really good piece of software, but its evolution is quite slow. > The primary OS for UNINETT is debian (our so-called samson3 platform). > We will make sure the dedian package is maintained and up to date. > The current status is that a 3.0 package is in the making, final > testing needs to be done. I cannot commit a date for this, as of now, > but we are definitely addressing this and other pressing NAV issues. > nice... best regards -- Woj

2 1

nav is not monitoring
by perica＠akton.com.mk 03 Jan '06

03 Jan '06

Hi, Looks like my 3.0.b10 nav installation isn't doing the automated processes like it should. I'm pretty sure I've done the seeding process correctly, and nav isn't showing any error's. The problem is in that nav isn't monitoring new ip devices I add. i.e. if I plug out a router that is in nav's db, it still shows it as UP, hence my alert profile doesn't work. Also nav makes cricket targets only for sysuptime, no interface targets. I need help in tracking this problem. Note: I have no switches, cabling and patches entered in the nav db, maybe the problem is there!? Also I don't have a switch that has snmp support, where/how do I enter such equipment in nav's db? Perica Veljanovski

3 2

nav not making targets for cricket
by perica＠akton.com.mk 03 Jan '06

03 Jan '06

Hi I got my NAV 3.0 beta10 working on FreeBSD 5.4. I added a new vendor "bintec", and 2 types X4300 and X1200II. Then added 2 IP devices category GW which are bintec routers respectively to the types. makecricketconfig.pl made targets only in /cricket-config/routers/ ! Bintec uses standard IF-MIB, and from what I've read, makecricketconfig.pl should make cricket targets for bintec interfaces!? What am I doing wrong? Could you explain the process in detail, or refer me to a former discussion or man!? Perica Veljanovski

2 1

Difference between netboxid and deviceid
by Borge.Brunes＠cc.uit.no 02 Jan '06

02 Jan '06

see subject. The reason why I ask? I get a lot of these in getDeviceData-stderr.log : SQLException for update statement: UPDATE netbox SET deviceid='4177' WHERE netboxid='374' org.postgresql.util.PSQLException: ERROR: duplicate key violates unique constraint "netbox_deviceid_key SQLException for update statement: UPDATE netbox SET deviceid='4177' WHERE netboxid='377' org.postgresql.util.PSQLException: ERROR: duplicate key violates unique constraint "netbox_deviceid_key" manage=# select * from netbox WHERE deviceid='4177'; netboxid | ip | roomid | typeid | deviceid | ----------+--------------+----------+--------+----------+ 369 | 129.242.X.X | fp2N4119 | 16 | 4177 | It's three Cisco AP1200 (witch different serial#) fighting about "deviceid='4177'" regards, -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

1 0

Manually adding router2router connection (possible?)
by Vidar.Faltinsen＠uninett.no 02 Jan '06

02 Jan '06

On Wed, 28 Dec 2005, Kristian Eide wrote: >> ATM-interfaces are correctly discovered in NAV - in "router ports report" I >> can see them with almost all informations but "Vlan number". Is there ANY way >> to make NAV see ATM-point-to-point connections? > > Yes, you can set the description field on the router interface which > NAV will then interpret. Unfortunately the only doc I can find here is > in Norwegian: > > http://metanav.ntnu.no/v2/admindok/navrunkonv.html > > Do we have an English version of this document? Yes, we do, http://metanav.ntnu.no/moin.cgi/SubnetsAndVlans#guide-lines-for-configuring… > The short version is > that the router description should be: > > link,$to_router[,$comment,$vlan] > > -- > Kristian - Vidar

1 0

Manually adding router2router connection (possible?)
by woj＠tstd.pl 29 Des '05

29 Des '05

On Wednesday 28 December 2005 10:18, Kristian Eide wrote: > > ATM-interfaces are correctly discovered in NAV - in "router ports report" > > I can see them with almost all informations but "Vlan number". Is there > > ANY way to make NAV see ATM-point-to-point connections? > > Yes, you can set the description field on the router interface which > NAV will then interpret. Unfortunately the only doc I can find here is > in Norwegian: > > http://metanav.ntnu.no/v2/admindok/navrunkonv.html So, is there english version? > Do we have an English version of this document? The short version is > that the router description should be: > > link,$to_router[,$comment,$vlan] "$to_router" should be dns name of router? This name which is used in NAV for box? thanks for info... -- Wojciech Kozicki

2 3

Manually adding router2router connection (possible?)
by woj＠tstd.pl 28 Des '05

28 Des '05

On Wednesday 28 December 2005 10:18, Kristian Eide wrote: > > ATM-interfaces are correctly discovered in NAV - in "router ports report" > > I can see them with almost all informations but "Vlan number". Is there > > ANY way to make NAV see ATM-point-to-point connections? > > Yes, you can set the description field on the router interface which > NAV will then interpret. Unfortunately the only doc I can find here is > in Norwegian: > > http://metanav.ntnu.no/v2/admindok/navrunkonv.html > > Do we have an English version of this document? The short version is > that the router description should be: > > link,$to_router[,$comment,$vlan] I have my descriptions in this format, but still no desc. for routers interfaces in cricket. And more, some switches (nothing special, typical 2900 with atm interface) are properly recognized in NAV, but in Cricket can't see interfaces, only CPU. This switches have both - Ethernet and ATM interfaces... So, question is - what is the best way to debug cricket problems? I changed /usr/local/nav/bin/makecricketconfig.pl and put it into debug mode, but I don't know what to search... regards and thanks for answer... Woj -- ?yj tak, aby znajomym zrobi?o si? nudno, gdy umrzesz -- Julek Tuwim

2 2

weird problem
by woj＠tstd.pl 27 Des '05

27 Des '05

On Tuesday 27 December 2005 19:49, Wojciech Kozicki wrote: [cut the trash] I am sorry for last two messages - problem is solved, there was no ADMIN_email in: /usr/local/nav/etc/nav.conf sorry once again btw. What should I do with something like this (Nav keeps sending it to my by email): [27-Dec-2005 18:40:03 ] Retrieved data for x.x.1.12 (): 18,17,19552316,185184868,904658749,19,29 [27-Dec-2005 18:40:03*] Cannot update /usr/local/nav/cricket/cricket-config/../cricket-data//routers/x.x.1.12.rrd: expected 4 data source readings (got 7) from N:18:17:19552316:185184868:904658749:19:29:... x.x.1.12 is 7513 cisco router. regards -- Woj >From woj at tstd.pl Wed Dec 28 08:54:25 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Dec 28 08:55:10 2005 Subject: [Nav-users] no descriptions in Cricket for router ports Message-ID: <200512280854.26051.woj(a)tstd.pl> Hello, my NAV is up and running (installation done by this howto: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4). I have some problems with Cricket, there is no description for router graphs. These are cisco 7206, 750x, 7140 boxes. Description on routers interfaces are in following format (example): interface FastEthernet1/0/0.200 description elink,xxx_gw,xxx,,200 And in "Router ports report", for this port I can see: - in vlan column: "200" - in nettype column: "elink" - in netident: "router_name,xxx_gw" so it is recognized correctly in NAV... For switches - cisco 2900, 2950 there is no problem, all interfaces are described properly in Cricket. What I should check, please help. -- Woj >From woj at tstd.pl Wed Dec 28 09:54:40 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Wed Dec 28 09:55:10 2005 Subject: [Nav-users] Manually adding router2router connection (possible?) Message-ID: <200512280954.41512.woj(a)tstd.pl> Hello again, I hope that somebody is reading this, and I'm not in Yours kill-files yet ;-) I have many ATM-connections between routers. As far as I know Nav has got problems with auto-detecting such connections. My question: - is possible to "tell" Nav that particular connection exists? Or howto manage ATM-connections. I would like to have such connections in traffic-map... ATM-interfaces are correctly discovered in NAV - in "router ports report" I can see them with almost all informations but "Vlan number". Is there ANY way to make NAV see ATM-point-to-point connections? regards -- Woj >From kjartan.malde at uis.no Wed Dec 28 10:10:04 2005 From: kjartan.malde at uis.no (kjartan.malde(a)uis.no) Date: Wed Dec 28 10:10:10 2005 Subject: [Nav-users] Cricket error Message-ID: <OF63248337.796A72F9-ONC12570E5.003234BD-C12570E5.003740CC(a)uis.no> The powersupply on my Nav died, and since I got it back up I get these messeges every minute. Hope anyone can help me. The messages are coming from a one of the cards on a Cat6509. I running Nav 3.0 on CentOS. Rgds Kjartan Error and the lines leading up to it: [28-Dec-2005 09:12:07 ] Retrieved data for 9_15 (225): 166758758,116225181,0,0,1572947,1109513 [28-Dec-2005 09:12:07 ] Retrieved data for 9_16 (226): 10068,558308,0,0,16,8370 [28-Dec-2005 09:12:07 ] Retrieved data for 9_17 (227): 571765657,1224452921,0,0,3818864,4488386 [28-Dec-2005 09:12:07 ] Retrieved data for 9_18 (228): 101553,744762,0,0,589,6513 [28-Dec-2005 09:12:07*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.229 Error and the lines leading up to it: [28-Dec-2005 09:12:07 ] Retrieved data for 9_17 (227): 571765657,1224452921,0,0,3818864,4488386 [28-Dec-2005 09:12:07 ] Retrieved data for 9_18 (228): 101553,744762,0,0,589,6513 [28-Dec-2005 09:12:07*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.229 [28-Dec-2005 09:12:07 ] Walking ifIndex for *.*.*.*:161 to resolve interface-index mapping [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.229 Error and the lines leading up to it: [28-Dec-2005 09:12:08 ] Retrieved data for 9_19 (229): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_19 (229). [28-Dec-2005 09:12:08 ] Retrieved data for 9_19 (229): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_19 (229). [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.230 [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.230 Error and the lines leading up to it: [28-Dec-2005 09:12:08 ] Retrieved data for 9_20 (230): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_20 (230). [28-Dec-2005 09:12:08 ] Retrieved data for 9_20 (230): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_20 (230). [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.231 [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.231 Error and the lines leading up to it: [28-Dec-2005 09:12:08 ] Retrieved data for 9_21 (231): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_21 (231). [28-Dec-2005 09:12:08 ] Retrieved data for 9_21 (231): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_21 (231). [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.232 [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.232 Error and the lines leading up to it: [28-Dec-2005 09:12:08 ] Retrieved data for 9_22 (232): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_22 (232). [28-Dec-2005 09:12:08 ] Retrieved data for 9_22 (232): U,U,U,U,U,U [28-Dec-2005 09:12:08 ] Some data is missing for 9_22 (232). [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.233 [28-Dec-2005 09:12:08*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.14.233 >From kreide at gmail.com Wed Dec 28 10:18:15 2005 From: kreide at gmail.com (Kristian Eide) Date: Wed Dec 28 10:18:42 2005 Subject: [Nav-users] Manually adding router2router connection (possible?) In-Reply-To: <200512280954.41512.woj(a)tstd.pl> References: <200512280954.41512.woj(a)tstd.pl> Message-ID: <b4c110fd0512280118v5e886247x8ac482bcc837159b(a)mail.gmail.com> > ATM-interfaces are correctly discovered in NAV - in "router ports report" I > can see them with almost all informations but "Vlan number". Is there ANY way > to make NAV see ATM-point-to-point connections? Yes, you can set the description field on the router interface which NAV will then interpret. Unfortunately the only doc I can find here is in Norwegian: http://metanav.ntnu.no/v2/admindok/navrunkonv.html Do we have an English version of this document? The short version is that the router description should be: link,$to_router[,$comment,$vlan] -- Kristian

1 0

weird problem
by woj＠tstd.pl 27 Des '05

27 Des '05

Hello, Today I did NAV installation using this excellent howto: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 After adding some devices I have problem with using nav start/stop script: [root@nav ~]# /usr/local/nav/bin/nav start "-":8: bad minute errors in crontab file, can't install. Starting networkDiscovery: Failed Traceback (most recent call last): File "/usr/local/nav/bin/nav", line 181, in ? main(sys.argv[1:]) File "/usr/local/nav/bin/nav", line 101, in main commandFunc(queryList) File "/usr/local/nav/bin/nav", line 136, in c_start serviceIterator(queryList, helper) File "/usr/local/nav/bin/nav", line 113, in serviceIterator func(services[service]) File "/usr/local/nav/bin/nav", line 132, in helper service.start() File "/usr/local/nav/lib/python/nav/startstop.py", line 166, in start raise e nav.startstop.CrontabError: 256 I looked at navcron files and didn't find any errors, can anybody help? Where I should look for an errors? thanks. -- Woj >From woj at tstd.pl Tue Dec 27 19:49:35 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Tue Dec 27 19:50:00 2005 Subject: [Nav-users] weird problem In-Reply-To: <200512271921.22867.woj(a)tstd.pl> References: <200512271921.22867.woj(a)tstd.pl> Message-ID: <200512271949.35618.woj(a)tstd.pl> On Tuesday 27 December 2005 19:21, Wojciech Kozicki wrote: > Hello, > > Today I did NAV installation using this excellent howto: > http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 > > After adding some devices I have problem with using nav start/stop script: > > [root@nav ~]# /usr/local/nav/bin/nav start > "-":8: bad minute > errors in crontab file, can't install. > Starting networkDiscovery: Failed > Traceback (most recent call last): > File "/usr/local/nav/bin/nav", line 181, in ? > main(sys.argv[1:]) > File "/usr/local/nav/bin/nav", line 101, in main > commandFunc(queryList) > File "/usr/local/nav/bin/nav", line 136, in c_start > serviceIterator(queryList, helper) > File "/usr/local/nav/bin/nav", line 113, in serviceIterator > func(services[service]) > File "/usr/local/nav/bin/nav", line 132, in helper > service.start() > File "/usr/local/nav/lib/python/nav/startstop.py", line 166, in start > raise e > nav.startstop.CrontabError: 256 and one more: [root@nav /]# /usr/local/nav/bin/nav status networkDiscovery: Up NOTICE: Current crontab does not match the content of networkDiscovery ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ cricket: Up eventEngine does not seem to be running... logengine: Up backup: Up servicemon.py does not seem to be running... smsd.pl does not seem to be running... thresholdMon: Up mactrace: Up iptrace: Up safe_smsd: Up Alertengine is not running. > I looked at navcron files and didn't find any errors, can anybody help? > Where I should look for an errors? > > thanks. -- Woj

1 0

SV: [Nav-users] NAV 3.0.0 in Debian?
by woj＠tstd.pl 27 Des '05

27 Des '05

On Tuesday 27 December 2005 13:42, Peder Magne Sefland wrote: > >>> Wojciech Kozicki <woj(a)tstd.pl> 27.12.2005 12:52:39 >>> > > Maybe there > should be some live-cd with preinstalled NAV, what You think? > > > > An another suggestion is to make an nav-vmware-installation, and those > that not have Workstation/GSX/ESX can use vmware-player(freeware) > > This is good idea too... I will try to install NAV on Centos 4.2, using http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 somebody tried this? regards Woj -- ?yj tak, aby znajomym zrobi?o si? nudno, gdy umrzesz -- Julek Tuwim

1 0

NAV 3.0.0 in Debian?
by kreide＠gmail.com 27 Des '05

27 Des '05

> Maybe there > should be some live-cd with preinstalled NAV, what You think? > An another suggestion is to make an nav-vmware-installation, and those > that not have Workstation/GSX/ESX can use vmware-player(freeware) That is actually an excellent idea. It would make it super-simple to get NAV up and running on almost any x86 computer (even windows!), and installing it for real would be a simple matter of copying all the files on the VMWare partition onto a real partition. It should also not be much work to do. Does ITEA have a VMWare license? -- Kristian

1 0

NAV 3.0.0 in Debian?
by woj＠tstd.pl 27 Des '05

27 Des '05

On Tuesday 27 December 2005 12:52, Wojciech Kozicki wrote: [...] > 3. What is the _simplest_ and _fastest_ way to start using newest version > of NAV? I mean free distributions: - SuSE Linux Enterprise Server 9 - Red Hat Enterprise Linux 4 are not free to download, is there possibility to use Suse howto and install NAV on free Suse Linux? regards -- Woj >From peder.sefland at hivolda.no Tue Dec 27 13:42:06 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Tue Dec 27 13:42:47 2005 Subject: SV: [Nav-users] NAV 3.0.0 in Debian? Message-ID: <s3b144cf.025(a)HVO-3.hivolda.no> >>> Wojciech Kozicki <woj(a)tstd.pl> 27.12.2005 12:52:39 >>> Maybe there should be some live-cd with preinstalled NAV, what You think? An another suggestion is to make an nav-vmware-installation, and those that not have Workstation/GSX/ESX can use vmware-player(freeware) Peder Sefland

1 0

Collects cam data from switches
by roar.pettersen＠uib.no 20 Des '05

20 Des '05

Hello ! > Since the error is coming from within the Postgre Java driver I would > think there is some mismatch between the JDBC driver and the Postgre > server. Try to upgrade one or both (the 7.4 version is really not > recommended anymore). Would you advise me to upgrade to version 8.1 or 8.0 ? -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kreide at gmail.com Tue Dec 20 13:47:28 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Dec 20 22:47:35 2005 Subject: [Nav-users] Collects cam data from switches In-Reply-To: <Pine.GSO.4.61.0512202152310.28699(a)alf.uib.no> References: <Pine.GSO.4.61.0512201119310.15708(a)alf.uib.no> <b4c110fd0512200950l494bfce1ydf7a260e6a125ab4(a)mail.gmail.com> <Pine.GSO.4.61.0512202133580.28699(a)alf.uib.no> <b4c110fd0512201243l37dcc654x43d72fce187671b4(a)mail.gmail.com> <Pine.GSO.4.61.0512202152310.28699(a)alf.uib.no> Message-ID: <b4c110fd0512201347n114d894crc016036d580926f6(a)mail.gmail.com> > Would you advise me to upgrade to version 8.1 or 8.0 ? 8.1. -- Kristian

1 0

Collects cam data from switches
by roar.pettersen＠uib.no 20 Des '05

20 Des '05

Hello ! >> SQLException for update statement: INSERT INTO netboxinfo >> (netboxid,key,var,val) VALUES ('304','unrecognizedCDP','148','`?@') >> org.postgresql.util.PSQLException: ERROR: invalid message format >> Wounder what 'unrecognizedCDP' mean ? > > This could be a string escaping issue, but that theory should be easy > to test at least. Do you have more information for me ? Maybe what I should check or verify in my configuration ? > The 'unrecognizedCDP' is a CDP neighbour string for > which we were not able to find a matching name in netbox, and it is > then stored in netboxinfo (there it is used for correctly dealing with > HP stacks IIRC). Ok, but could this be related to the new HP Procurve 3400-cl-48G ? Btw, we doesn't have any clusters configured on our HP switches. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kreide at gmail.com Tue Dec 20 12:43:47 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Dec 20 21:43:53 2005 Subject: [Nav-users] Collects cam data from switches In-Reply-To: <Pine.GSO.4.61.0512202133580.28699(a)alf.uib.no> References: <Pine.GSO.4.61.0512201119310.15708(a)alf.uib.no> <b4c110fd0512200950l494bfce1ydf7a260e6a125ab4(a)mail.gmail.com> <Pine.GSO.4.61.0512202133580.28699(a)alf.uib.no> Message-ID: <b4c110fd0512201243l37dcc654x43d72fce187671b4(a)mail.gmail.com> > > This could be a string escaping issue, but that theory should be easy > > to test at least. > Do you have more information for me ? Actually I just tried the above INSERT and the string escaping seems to work fine, so it is probably something else. > Maybe what I should check or verify in my configuration ? Since the error is coming from within the Postgre Java driver I would think there is some mismatch between the JDBC driver and the Postgre server. Try to upgrade one or both (the 7.4 version is really not recommended anymore). > Ok, but could this be related to the new HP Procurve 3400-cl-48G ? > Btw, we doesn't have any clusters configured on our HP switches. This could be what caused it, but the real error is elsewhere. -- Kristian

1 0

Collects cam data from switches
by roar.pettersen＠uib.no 20 Des '05

20 Des '05

Hello ! I've just re-installed our NAV3 from scratch and I have a odd problem with the CAM collector cron job : org.postgresql.util.PSQLException: ERROR: invalid message format at org.postgresql.util.PSQLException.parseServerError(PSQLException.java:139) at org.postgresql.core.QueryExecutor.executeV3(QueryExecutor.java:152) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:100) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:43) at org.postgresql.jdbc1.AbstractJdbc1Statement.execute(AbstractJdbc1Statement.java:517) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:50) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeUpdate(AbstractJdbc1Statement.java:273) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeUpdate(AbstractJdbc1Statement.java:259) at no.ntnu.nav.Database.Database.update(Database.java:987) at no.ntnu.nav.Database.Database.insert(Database.java:911) at no.ntnu.nav.netboxinfo.NetboxInfo.insertVals(NetboxInfo.java:502) at no.ntnu.nav.netboxinfo.NetboxInfo.putNoError(NetboxInfo.java:359) at no.ntnu.nav.netboxinfo.NetboxInfo.putError(NetboxInfo.java:335) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:326) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:296) at QueryBoks.processCDP(QueryBoks.java:665) at QueryBoks.run(QueryBoks.java:212) SQLException for update statement: INSERT INTO netboxinfo (netboxid,key,var,val) VALUES ('304','unrecognizedCDP','148','`?@') org.postgresql.util.PSQLException: ERROR: invalid message format at org.postgresql.util.PSQLException.parseServerError(PSQLException.java:139) at org.postgresql.core.QueryExecutor.executeV3(QueryExecutor.java:152) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:100) at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:43) at org.postgresql.jdbc1.AbstractJdbc1Statement.execute(AbstractJdbc1Statement.java:517) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:50) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeUpdate(AbstractJdbc1Statement.java:273) at org.postgresql.jdbc1.AbstractJdbc1Statement.executeUpdate(AbstractJdbc1Statement.java:259) at no.ntnu.nav.Database.Database.update(Database.java:987) at no.ntnu.nav.Database.Database.insert(Database.java:911) at no.ntnu.nav.netboxinfo.NetboxInfo.insertVals(NetboxInfo.java:502) at no.ntnu.nav.netboxinfo.NetboxInfo.putNoError(NetboxInfo.java:359) at no.ntnu.nav.netboxinfo.NetboxInfo.putError(NetboxInfo.java:335) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:326) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:296) at QueryBoks.processCDP(QueryBoks.java:665) at QueryBoks.run(QueryBoks.java:212) java.lang.RuntimeException: Got SQLException, aborting put: ERROR: invalid message format at no.ntnu.nav.netboxinfo.NetboxInfo.putError(NetboxInfo.java:342) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:326) at no.ntnu.nav.netboxinfo.NetboxInfo.put(NetboxInfo.java:296) at QueryBoks.processCDP(QueryBoks.java:665) at QueryBoks.run(QueryBoks.java:212) SQLException for update statement: INSERT INTO netboxinfo (netboxid,key,var,val) VALUES ('305','unrecognizedCDP','148','`?@') I'm using postgresql-7.4.9 and pg74.216.jdbc3.jar, have also tried other .jar files without luck. Wounder what 'unrecognizedCDP' mean ? -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From kreide at gmail.com Tue Dec 20 09:50:47 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Dec 20 18:50:55 2005 Subject: [Nav-users] Collects cam data from switches In-Reply-To: <Pine.GSO.4.61.0512201119310.15708(a)alf.uib.no> References: <Pine.GSO.4.61.0512201119310.15708(a)alf.uib.no> Message-ID: <b4c110fd0512200950l494bfce1ydf7a260e6a125ab4(a)mail.gmail.com> > SQLException for update statement: INSERT INTO netboxinfo > (netboxid,key,var,val) VALUES ('304','unrecognizedCDP','148','`?@') > org.postgresql.util.PSQLException: ERROR: invalid message format > Wounder what 'unrecognizedCDP' mean ? This could be a string escaping issue, but that theory should be easy to test at least. The 'unrecognizedCDP' is a CDP neighbour string for which we were not able to find a matching name in netbox, and it is then stored in netboxinfo (there it is used for correctly dealing with HP stacks IIRC). -- Kristian

1 0

missing FROM-clause entry for table netboxcategory
by morten.vold＠ntnu.no 19 Des '05

19 Des '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 19/12/2005 10:54, Perica Veljanovski uttered: > Thanks for taking the time mate! > postgresql-server-8.1.0 > postgresql-client-8.1.0 Ok, I don't know what changed from 8.0 to 8.1 - for all I know, it could be related to the default configuration installed in a FreeBSD package of PostgreSQL. I believe a quick work-around for your problem would be to edit your postgresql.conf and make sure the following line is present: add_missing_from = true - From the PostgreSQL manual: add_missing_from (boolean) When true, tables that are referenced by a query will be automatically added to the FROM clause if not already present. The default is true for compatibility with previous releases of PostgreSQL. However, this behavior is not SQL-standard, and many people dislike it because it can mask mistakes. Set to false for the SQL-standard behavior of rejecting references to tables that are not listed in FROM. I'll take a look into fixing the actual SQL query in NAV later. - -- Morten Vold, ITEA, NTNU A: Because it messes up the order in which people normally read text. Q: Why is it such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDpoZAXxIl0kpcOkQRAl6lAKChOU9kOBhBmH/LSE8XcHGnm/KzlgCgxUFU kkmV6nVlgWdPxvBBMxS17oI= =8Qdh -----END PGP SIGNATURE----- >From perica at akton.com.mk Mon Dec 19 11:38:58 2005 From: perica at akton.com.mk (Perica Veljanovski) Date: Mon Dec 19 11:39:06 2005 Subject: [Nav-users] missing FROM-clause entry for table netboxcategory In-Reply-To: <43A68640.5020506(a)ntnu.no> Message-ID: <CARMENZIhTrBoe2U8QV00000126(a)carmen.akton.si> > -----Original Message----- > From: Morten Vold [mailto:morten.vold@ntnu.no] > Sent: Monday, December 19, 2005 11:07 > To: Perica Veljanovski > Cc: nav-users(a)itea.ntnu.no > Subject: Re: [Nav-users] missing FROM-clause entry for table > netboxcategory > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 19/12/2005 10:54, Perica Veljanovski uttered: > > > Thanks for taking the time mate! > > > postgresql-server-8.1.0 > > postgresql-client-8.1.0 > > Ok, I don't know what changed from 8.0 to 8.1 - for all I know, it could > be related to the default configuration installed in a FreeBSD package > of PostgreSQL. > > I believe a quick work-around for your problem would be to edit your > postgresql.conf and make sure the following line is present: > > add_missing_from = true > > - From the PostgreSQL manual: > > add_missing_from (boolean) > > When true, tables that are referenced by a query will be > automatically added to the FROM clause if not already present. The > default is true for compatibility with previous releases of PostgreSQL. > However, this behavior is not SQL-standard, and many people dislike it > because it can mask mistakes. Set to false for the SQL-standard behavior > of rejecting references to tables that are not listed in FROM. > > > > I'll take a look into fixing the actual SQL query in NAV later. > > - -- > Morten Vold, ITEA, NTNU > > A: Because it messes up the order in which people normally read text. > Q: Why is it such a bad thing? > A: Top-posting. > Q: What is the most annoying thing on usenet and in e-mail? > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.1 (MingW32) > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org > > iD8DBQFDpoZAXxIl0kpcOkQRAl6lAKChOU9kOBhBmH/LSE8XcHGnm/KzlgCgxUFU > kkmV6nVlgWdPxvBBMxS17oI= > =8Qdh > -----END PGP SIGNATURE----- Thanks mate! You were right. add_missing_from is off by default in pgsql 8.1 This should solve a couple of my problems. I discovered a similar "missing FROM-clause entry" problem in the messages module. Anyway, you know how to look for it now ;) Thanks again. Perica Veljanovski

1 0

missing FROM-clause entry for table netboxcategory
by perica＠akton.com.mk 19 Des '05

19 Des '05

> -----Original Message----- > From: Morten Vold [mailto:morten.vold@ntnu.no] > Sent: Wednesday, December 14, 2005 11:08 > To: Perica Veljanovski > Cc: nav-users(a)itea.ntnu.no > Subject: Re: [Nav-users] missing FROM-clause entry for table > netboxcategory > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 09/12/2005 14:32, Perica Veljanovski uttered: > > > ProgrammingError: ERROR: missing FROM-clause entry for table > > "netboxcategory" > [...] > > The same error appears when I try to edit ip devices. I did a select > > * query to manage.netbox and my device is there! Netboxcategory is > > empty, so I gather that the problem lies there but don't know what > > should be in it? Is this because I missed a step or maybe because I > > started to seed with a new device type. > > Looks like a bug in editdb. I tried to grok the code quickly (it's not > pretty ;) ), and my first impression is that your analysis is correct; > that "Add IP Device" might crash if there are no registered netbox > categories. > > Netbox categories are just a way to do site-specific categorization of > devices. Example categories from our own installation are "Web", > "Unix", "Windows", "LDAP" and soforth (we use them to categorize servers). > > I'll try to give the bug a closer look, but did you solve this problem > on your installation? > > > Also I've read the mailing lists archive and see that you've reported > > a "unexpected EOF on client connection" error from postgresql, which > > I also have! I didn't find a reference on how to confront this > > problem though? I haven't got to that point yet, but it would be nice > > to have some input. > > Sorry, but you'll have to live with this "problem" a bit longer. This > error is logged by PostgreSQL because of some clients that don't > properly close their database connections, they just sever them. > Apparently some of the NAV processes don't behave properly in this > respect. It's on the TODO-list to investigate which of them are the > naughty ones, but rest assured that the only actual problem in this is > that your PostgreSQL logs grow larger. > > > Note: my /alertprofiles/ doesn't work at all :) when I click it from > > /toolbox/ I get a blank screen. > > Sounds like a PHP problem, but it looks like your fellow FreeBSD users > are helping you with this :) > > - -- > Morten Vold, ITEA, NTNU > > A: Because it messes up the order in which people normally read text. > Q: Why is it such a bad thing? > A: Top-posting. > Q: What is the most annoying thing on usenet and in e-mail? > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.1 (MingW32) > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org > > iD8DBQFDn+76XxIl0kpcOkQRAlZNAKCebhr/8+FHW2mLdDQMCQm1Y+FuzACgx5S+ > HOVwxf+mE28hzVqR3Rr1XcY= > =LUC1 > -----END PGP SIGNATURE----- Thank you!!! This makes since :) So, today I had some time, gave the problem a go, and this is what I've come up with: IP Devices->Add doesn't populate the netboxcategory table, it doesn't even let you choose from subcat table in the web form! Netboxcategory has 2 fkey's, netboxid = netbox.netboxid and category = subcat.subcatid. I tried populating netboxcategory myself, but the problem persists! I think the problem is in the IP Devices->Edit query, the error again: --- ProgrammingError: ERROR: missing FROM-clause entry for table "netboxcategory" SELECT netboxid,netboxcategory.category FROM netbox WHERE netboxcategory.netboxid=netboxid --- Now I have no experience with postgressql, but have about 5 years of mysql experience, and this query doesn't make much since to me. There is no reference to netboxcategory in the FROM clause, but the SELECT uses it!? Maybe I'm wrong. Also, I think that the idea of add ip devices is to first populate netbox and then call edit (or part from it) to populate netboxcategory and probably other tables. And this is where the module crashes. But don't take my word for it, because I haven't used NAV before, nor have I examined the code!!! Hope this helps. On the other subject: A BIG thanks to my fellow FreeBSD users :P All NAV modules work now! Alert Profiles still has some errors (I assume they are trivial, haven't had time to check), and Cricket still doesn't display files from /images and doesn't read the .css so it looks kinda grouse :) Apart from that, I have a working NAV >:) Morten, I have a favor to ask. Since I have a deadline until Monday to get NAV running (or we will use cacti+kannel), could you look into my ip devices->edit problem. I'm more of a Perl guy, so Python is new to me. Thanks all! Perica Veljanovski

2 1

Messages from alaertengine
by morten.vold＠ntnu.no 14 Des '05

14 Des '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 06/12/2005 13:07, Hauge Odd Arne uttered: > I always get 2 e-mail messages if a box does not repy to ping and two > messages if it's declared down/up from alertenigne@nav... If a service > is down/up I get 6 e-mail messages from alertengine... > I have tried deleting my entire alertprofile and adding a new one, but > it didn't make any different. Did the alerts stop entirely when you disabled/deleted your profile? Could be that you've defined the same alert address on two different user accounts (or it might just be a weird bug). - -- Morten Vold, ITEA, NTNU A: Because it messes up the order in which people normally read text. Q: Why is it such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDn+N6XxIl0kpcOkQRAgTWAJ0VpuQ9d2mvRrooBW/2tMcqc00LDwCgy35G nyc+3jSo0YjIMpjJVKul19s= =6yhB -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Wed Dec 14 10:25:58 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Wed Dec 14 10:26:00 2005 Subject: VS: [Nav-users] Don't get alerts based on Sub category In-Reply-To: <s3959dc4.001(a)HVO-3.hivolda.no> References: <s3959dc4.001(a)HVO-3.hivolda.no> Message-ID: <439FE526.1010607(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 06/12/2005 14:18, Peder Magne Sefland uttered: > I have been trying to get alerts based on this idea, but with no > success. If I add "All alerts" I get alerts on email and sms. So I > know that the alertengine is working. > > But I have also tried to make an alert based on one ip-address > (equals IP) with no success. When should I use "equals" or "in"? (I > have tried both) I cannot confirm nor deny your claims here. Fact is that I've experienced some very strange problems with the alert system myself. My problem is that I've tried creating an alert profile to alert me of anything that concerns one particular IP (or sysname), and it seems I always end up receiving any and all alerts that pass through NAV. Strangely enough, I don't hear anyone else here at NTNU complaining :-/ I asked the alertprofiles/alertengine authors to investigate a while back, but still no word from them. - -- Morten Vold, ITEA, NTNU A: Because it messes up the order in which people normally read text. Q: Why is it such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDn+UmXxIl0kpcOkQRAhgBAKDpCHY9JCLThTCZ6Xz7DKM6vqfVBwCcCQSG EJtSJ20Ae9CaoxO6n1yZWiw= =ShBq -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Wed Dec 14 11:07:54 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Wed Dec 14 11:07:57 2005 Subject: [Nav-users] missing FROM-clause entry for table netboxcategory In-Reply-To: <CARMENKicUbvBDxroC600000068(a)carmen.akton.si> References: <CARMENKicUbvBDxroC600000068(a)carmen.akton.si> Message-ID: <439FEEFA.2000002(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 09/12/2005 14:32, Perica Veljanovski uttered: > ProgrammingError: ERROR: missing FROM-clause entry for table > "netboxcategory" [...] > The same error appears when I try to edit ip devices. I did a select > * query to manage.netbox and my device is there! Netboxcategory is > empty, so I gather that the problem lies there but don't know what > should be in it? Is this because I missed a step or maybe because I > started to seed with a new device type. Looks like a bug in editdb. I tried to grok the code quickly (it's not pretty ;) ), and my first impression is that your analysis is correct; that "Add IP Device" might crash if there are no registered netbox categories. Netbox categories are just a way to do site-specific categorization of devices. Example categories from our own installation are "Web", "Unix", "Windows", "LDAP" and soforth (we use them to categorize servers). I'll try to give the bug a closer look, but did you solve this problem on your installation? > Also I've read the mailing lists archive and see that you've reported > a "unexpected EOF on client connection" error from postgresql, which > I also have! I didn't find a reference on how to confront this > problem though? I haven't got to that point yet, but it would be nice > to have some input. Sorry, but you'll have to live with this "problem" a bit longer. This error is logged by PostgreSQL because of some clients that don't properly close their database connections, they just sever them. Apparently some of the NAV processes don't behave properly in this respect. It's on the TODO-list to investigate which of them are the naughty ones, but rest assured that the only actual problem in this is that your PostgreSQL logs grow larger. > Note: my /alertprofiles/ doesn't work at all :) when I click it from > /toolbox/ I get a blank screen. Sounds like a PHP problem, but it looks like your fellow FreeBSD users are helping you with this :) - -- Morten Vold, ITEA, NTNU A: Because it messes up the order in which people normally read text. Q: Why is it such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDn+76XxIl0kpcOkQRAlZNAKCebhr/8+FHW2mLdDQMCQm1Y+FuzACgx5S+ HOVwxf+mE28hzVqR3Rr1XcY= =LUC1 -----END PGP SIGNATURE----- >From Ingeborg.Hellemo at cc.uit.no Wed Dec 14 13:32:14 2005 From: Ingeborg.Hellemo at cc.uit.no (Ingeborg Hellemo) Date: Wed Dec 14 13:32:19 2005 Subject: SV: Re: [Nav-users] Don't get alerts based on Sub category In-Reply-To: Your message of "Wed, 07 Dec 2005 16:20:19 +0100." <s3970bc9.024(a)HVO-3.hivolda.no> Message-ID: <200512141232.jBECWEVD051728(a)dis.cc.uit.no> peder.sefland(a)hivolda.no said: > Do mean that alerts based on Sub category works with your own filters/filter? > I did not get it to work at, all based on Sub category I have now tested this once more, and you are correct. Filters (global or personal) based on Sub category does not work. I really hope someone can fix this because we need this functionality. --Ingeborg

1 0

[Nav-users]
by lox＠netzwerkplanet.de 13 Des '05

13 Des '05

Dru schrieb: > > contribute the steps I documented to get nav working on FreeBSD Hi! I would appreciate this very much, since I am changing our major server OS from Linux to FreeBSD. And even on Linux we are still experiencing trouble with NAV. Thanks for your effort, Christian >From dlavigne6 at sympatico.ca Tue Dec 13 12:55:02 2005 From: dlavigne6 at sympatico.ca (Dru) Date: Tue Dec 13 18:51:59 2005 Subject: [Nav-users] In-Reply-To: <439F05A6.1020001(a)netzwerkplanet.de> References: <20051201165300.ZVHR1593.tomts46-srv.bellnexxia.net(a)[209.226.175.82]> <43902063.3020404(a)ntnu.no> <20051203104910.M27954(a)dru.domain.org> <439F05A6.1020001(a)netzwerkplanet.de> Message-ID: <20051213125308.O547(a)dru.domain.org> On Tue, 13 Dec 2005, Christian Lox wrote: > Dru schrieb: >> >> contribute the steps I documented to get nav working on FreeBSD > > Hi! > > I would appreciate this very much, since I am changing our major > server OS from Linux to FreeBSD. > And even on Linux we are still experiencing trouble with NAV. > Thanks for your effort, I've sent my notes to Christian but haven't uploaded them yet for others as I'm working on updating the port. I'm hoping to automate a lot of the post-installation configs into the port's install scripts. Hopefully I'll have something before New Years. Dru >From Borge.Brunes at cc.uit.no Tue Dec 13 21:30:32 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Tue Dec 13 21:30:39 2005 Subject: [Nav-users] missing FROM-clause entry for table netboxcategory In-Reply-To: Message from "Perica Veljanovski" <perica(a)akton.com.mk> <CARMEN6pkNzPZrIkyPz00000157(a)carmen.akton.si> Message-ID: <200512132030.jBDKUWFu006262(a)duke.cc.uit.no> perica(a)akton.com.mk said: > ----- Traceback (most recent call last): > File "/usr/local/nav/lib/python/nav/web/pyproxy/proxy.py", line 61, in > handler > user=user, session=req.session.id) > File "/usr/local/nav/lib/python/nav/web/pyproxy/proxy.py", line 124, in > doRequest > request.request(method, path, query, headers) > File "/usr/local/lib/python2.4/httplib.py", line 801, in request > self._send_request(method, url, body, headers) > File "/usr/local/lib/python2.4/httplib.py", line 824, in _send_request > self.endheaders() > File "/usr/local/lib/python2.4/httplib.py", line 795, in endheaders > self._send_output() > File "/usr/local/lib/python2.4/httplib.py", line 676, in _send_output > self.send(msg) > File "/usr/local/lib/python2.4/httplib.py", line 643, in send > self.connect() > File "/usr/local/lib/python2.4/httplib.py", line 627, in connect > raise socket.error, msg error: (61, 'Connection refused') ----- Any > suggestions?! Make sure that Tomcat are listen on the same port as defined in SERVERPORT= in nav/lib/python/nav/web/pyproxy/proxy.py regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

NAV - Device discovery problems
by adam.nisula＠gmail.com 12 Des '05

12 Des '05

Hello Everyone, I have installed the NAV3.0.0 on a CentOS system[Linux version 2.6.9-22.0.1.EL (buildcentos@x8664-build)] Originally I had installed most of the devices into the Database and everything seemed to be working well. The program did not see module 1 / port 1 on several devices. All of the other ports and modules showed up. After this I tried adding new devices to the database and they would not show up in the network explorer. To try and fix this problem I decided to dump the databases and recreate them and try adding the devices again. This did not work. The devices showed up but the problem with missing ports was still there. I then tried dropping the databases again, removing all of the files installed, and walked through the install process again. Now only the first ip-device I installed shows up in the network-explorer, yet they are all in the report. I've tried all the cron jobs for navcron and still only the one shows up. All of the devices show that their gateway is the ip address of the first device added to the database. Devices: #vendorid:typename:sysoid[:description:frequency:cdp=(yes|no):tftp=(yes|no)] nortel:bps2000:1.3.6.1.4.1.45.3.40.1:Business Policy Switch 2000:3600:no:no nortel:551024:1.3.6.1.4.1.45.3.52.1:BayStack 5510 24T:3600:no:no nortel:551048:1.3.6.1.4.1.45.3.53.1:BayStack 5510 48T:3600:no:no nortel:552048:1.3.6.1.4.1.45.3.59.2:BayStack 5520 48T PWR:3600:no:no nortel:46024:1.3.6.1.4.1.45.3.49.1:BayStack 460 24T PWR:3600:no:no nortel:nortelcore:1.3.6.1.4.1.2272.30:Nortel Core:3600:no:no The program can reteive the serial from all other devices. First Ip Device: #roomid:ip:orgid:catid:[ro:serial:rw:function:subcat1:subcat2..] 1:172.20.8.13:baycrest:SW:snmp-read::snmp-write:switch 13:172.18.0.2:baycrest:GSW:$upp0rt::bcgc-SW:core #obtains type from sysObjectID and the active ports on the first module of 9, but nothing more. This ip '172.20.8.13' becomes the gateway for all other devices discovered after adding this one. 1) How do I force an update for Network Explorer? 2) How do I get NAV to show the first port on the first module of a switch? (172.20.8.13) 3) How do I get NAV to reteive the correct gateway information for a device? (172.20.8.13) 4) What do I change to get the rest of the modules to show up in the core device? (172.18.0.2) I know this is a lot to look at but I would greatly appreciate help with any of these questions. Adam >From perica at akton.com.mk Tue Dec 13 17:38:24 2005 From: perica at akton.com.mk (Perica Veljanovski) Date: Tue Dec 13 17:38:35 2005 Subject: [Nav-users] missing FROM-clause entry for table netboxcategory In-Reply-To: <CARMENmRf6Ci6nx8dyD000000d0(a)carmen.akton.si> Message-ID: <CARMEN6pkNzPZrIkyPz00000157(a)carmen.akton.si> Hi again, I changed php5 with php4 and the extensions you suggested. I double checked my setup against the post from Roar and the setup steps that Dru sent me. Everyting seems ok, but... The proglem persists! So, let's thake a look at another problem, maybe will solve the problem by attacking another one :) This is what happens when i clikc on the Network Explorer from my Toolbox: ----- Traceback (most recent call last): File "/usr/local/nav/lib/python/nav/web/pyproxy/proxy.py", line 61, in handler user=user, session=req.session.id) File "/usr/local/nav/lib/python/nav/web/pyproxy/proxy.py", line 124, in doRequest request.request(method, path, query, headers) File "/usr/local/lib/python2.4/httplib.py", line 801, in request self._send_request(method, url, body, headers) File "/usr/local/lib/python2.4/httplib.py", line 824, in _send_request self.endheaders() File "/usr/local/lib/python2.4/httplib.py", line 795, in endheaders self._send_output() File "/usr/local/lib/python2.4/httplib.py", line 676, in _send_output self.send(msg) File "/usr/local/lib/python2.4/httplib.py", line 643, in send self.connect() File "/usr/local/lib/python2.4/httplib.py", line 627, in connect raise socket.error, msg error: (61, 'Connection refused') ----- Any suggestions?! Also to remind you, my posgres log file is filling up with "unexpected EOF on client connection". This is a subject I found in the mail archive but found no solution for. Thanks alot for taking the tame! Perica Vlejanovski -----Original Message----- From: nav-users-bounces(a)itea.ntnu.no [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Perica Veljanovski Sent: Sunday, December 11, 2005 10:43 To: 'Roar Pettersen' Cc: nav-users(a)itea.ntnu.no Subject: RE: [Nav-users] missing FROM-clause entry for table netboxcategory Hi, That is exactly what I did in my install of NAV, except of the edit in /usr/local/cricket/cricket/lib/RRD/File.pm. I use php5, so maybe the problem is there. Also php5 doesn't have overload in the extensions. Anyway, thanks for the post. It was nice to compare what I did to my poor nav install with someone else :P Perica Veljanovski -----Original Message----- From: Roar Pettersen [mailto:edprp@uib.no] On Behalf Of Roar Pettersen Sent: Friday, December 09, 2005 14:55 To: Dru Cc: Perica Veljanovski; nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] missing FROM-clause entry for table netboxcategory Hello ! >> I installed NAV 3.0.b10 on a FreeBSD 5.4 from ports. Had some trouble >> setting everything up :) and apparently still have some troubles. > > > The port doesn't install everything you need to get each module working. I'm > working on a how-to as I've resolved most of the issues on a FreeBSD 6.0. If > you want to send me a copy of your pkg_info we can start comparing systems > from there. Please read my posting on this forum earlier regarding NAV and FreeBSD, read this info and maybe some info is still missing ? http://desperados.itea.ntnu.no/pipermail/nav-users/2005-August/000912.html Btw, the FreeBSD port of NAV is dead, but we are hoping that we have a new maintainer soon. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

missing FROM-clause entry for table netboxcategory
by dlavigne6＠sympatico.ca 09 Des '05

09 Des '05

On Fri, 9 Dec 2005, Perica Veljanovski wrote: > Hi, > > I installed NAV 3.0.b10 on a FreeBSD 5.4 from ports. Had some trouble > setting everything up :) and apparently still have some troubles. The port doesn't install everything you need to get each module working. I'm working on a how-to as I've resolved most of the issues on a FreeBSD 6.0. If you want to send me a copy of your pkg_info we can start comparing systems from there. Dru >From roar.pettersen at uib.no Fri Dec 9 14:54:38 2005 From: roar.pettersen at uib.no (Roar Pettersen) Date: Fri Dec 9 14:54:51 2005 Subject: [Nav-users] missing FROM-clause entry for table netboxcategory In-Reply-To: <20051209084648.S564(a)dru.domain.org> References: <CARMENKicUbvBDxroC600000068(a)carmen.akton.si> <20051209084648.S564(a)dru.domain.org> Message-ID: <Pine.GSO.4.61.0512091451560.18271(a)alf.uib.no> Hello ! >> I installed NAV 3.0.b10 on a FreeBSD 5.4 from ports. Had some trouble >> setting everything up :) and apparently still have some troubles. > > > The port doesn't install everything you need to get each module working. I'm > working on a how-to as I've resolved most of the issues on a FreeBSD 6.0. If > you want to send me a copy of your pkg_info we can start comparing systems > from there. Please read my posting on this forum earlier regarding NAV and FreeBSD, read this info and maybe some info is still missing ? http://desperados.itea.ntnu.no/pipermail/nav-users/2005-August/000912.html Btw, the FreeBSD port of NAV is dead, but we are hoping that we have a new maintainer soon. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From perica at akton.com.mk Sun Dec 11 10:42:53 2005 From: perica at akton.com.mk (Perica Veljanovski) Date: Sun Dec 11 10:43:06 2005 Subject: [Nav-users] missing FROM-clause entry for table netboxcategory In-Reply-To: <Pine.GSO.4.61.0512091451560.18271(a)alf.uib.no> Message-ID: <CARMENmRf6Ci6nx8dyD000000d0(a)carmen.akton.si> Hi, That is exactly what I did in my install of NAV, except of the edit in /usr/local/cricket/cricket/lib/RRD/File.pm. I use php5, so maybe the problem is there. Also php5 doesn't have overload in the extensions. Anyway, thanks for the post. It was nice to compare what I did to my poor nav install with someone else :P Perica Veljanovski -----Original Message----- From: Roar Pettersen [mailto:edprp@uib.no] On Behalf Of Roar Pettersen Sent: Friday, December 09, 2005 14:55 To: Dru Cc: Perica Veljanovski; nav-users(a)itea.ntnu.no Subject: Re: [Nav-users] missing FROM-clause entry for table netboxcategory Hello ! >> I installed NAV 3.0.b10 on a FreeBSD 5.4 from ports. Had some trouble >> setting everything up :) and apparently still have some troubles. > > > The port doesn't install everything you need to get each module working. I'm > working on a how-to as I've resolved most of the issues on a FreeBSD 6.0. If > you want to send me a copy of your pkg_info we can start comparing systems > from there. Please read my posting on this forum earlier regarding NAV and FreeBSD, read this info and maybe some info is still missing ? http://desperados.itea.ntnu.no/pipermail/nav-users/2005-August/000912.html Btw, the FreeBSD port of NAV is dead, but we are hoping that we have a new maintainer soon. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no

1 0

SV: Re: [Nav-users] Don't get alerts based on Sub category
by peder.sefland＠hivolda.no 07 Des '05

07 Des '05

>>> Ingeborg Hellemo <Ingeborg.Hellemo(a)cc.uit.no> 07.12.2005 10:09:33 >>> I think we have the same problem. I have made a public filter, but when I include this in my personal filter group I don't receive alerts that match the filter. If I make my own filters or filtergroups things works as expected. Perhaps it has something to do with settings in the "Public Access" page? --Ingeborg Do mean that alerts based on Sub category works with your own filters/filter? I did not get it to work at, all based on Sub category Peder Sefland >From perica at akton.com.mk Fri Dec 9 14:32:28 2005 From: perica at akton.com.mk (Perica Veljanovski) Date: Fri Dec 9 14:32:41 2005 Subject: [Nav-users] missing FROM-clause entry for table netboxcategory Message-ID: <CARMENKicUbvBDxroC600000068(a)carmen.akton.si> Hi, I installed NAV 3.0.b10 on a FreeBSD 5.4 from ports. Had some trouble setting everything up :) and apparently still have some troubles. Some parts of the web interface show errors, and because I'm just starting to seed the db I will begin from there: So, I added some locations, rooms, organizations, vendors, types. Everything worked fine until I tried to add an ip device. Then I got this error: --- Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 524, in editPage listView.fill(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 798, in fill tooltipDef[2] = executeSQLreturn(sql) File "/usr/local/nav/apache/webroot/editdb/editdbSQL.py", line 45, in executeSQLreturn database.execute(sql) ProgrammingError: ERROR: missing FROM-clause entry for table "netboxcategory" SELECT netboxid,netboxcategory.category FROM netbox WHERE netboxcategory.netboxid=netboxid --- The same error appears when I try to edit ip devices. I did a select * query to manage.netbox and my device is there! Netboxcategory is empty, so I gather that the problem lies there but don't know what should be in it? Is this because I missed a step or maybe because I started to seed with a new device type. Also I've read the mailing lists archive and see that you've reported a "unexpected EOF on client connection" error from postgresql, which I also have! I didn't find a reference on how to confront this problem though? I haven't got to that point yet, but it would be nice to have some input. Note: my /alertprofiles/ doesn't work at all :) when I click it from /toolbox/ I get a blank screen. Thanks ahead

1 0

VS: [Nav-users] Don't get alerts based on Sub category
by peder.sefland＠hivolda.no 06 Des '05

06 Des '05

I can't see that I have got any response on this question. So I try again. Peder Sefland >>> "Peder Magne Sefland" <peder.sefland(a)hivolda.no> 21.06.2005 08:50:18 >>> The "Alert Profiles" is not so easy to understand. But I'm not giving up :-) My idea was that I should make some Public filters and Public filter groups for my colleges at the computer dep. To make it easier for them to make alert profiles. So I thought that if we regisetred all the servers in their Sub category, it would be easy to get all the alerts for the servers in that group (All the Novell servers or Mail servers and so on.) I have been trying to get alerts based on this idea, but with no success. If I add "All alerts" I get alerts on email and sms. So I know that the alertengine is working. But I have also tried to make an alert based on one ip-address (equals IP) with no success. When should I use "equals" or "in"? (I have tried both) I'm attaching two screen-shot of my Sub category filter and filter groups. Please help me, tell me what I'm doing wrong, or if there is some bug. My boss wants alerts :-) Peder Sefland >From peder.sefland at hivolda.no Tue Dec 6 14:40:23 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Tue Dec 6 15:14:35 2005 Subject: [Nav-users] Don't get alerts based on Sub category Message-ID: <s395a2f0.070(a)HVO-3.hivolda.no> The "Alert Profiles" is not so easy to understand. But I'm not giving up :-) My idea was that I should make some Public filters and Public filter groups for my colleges at the computer dep. To make it easier for them to make alert profiles. So I thought that if we regisetred all the servers in their Sub category, it would be easy to get all the alerts for the servers in that group (All the Novell servers or Mail servers and so on.) I have been trying to get alerts based on this idea, but with no success. If I add "All alerts" I get alerts on email and sms. So I know that the alertengine is working. But I have also tried to make an alert based on one ip-address (equals IP) with no success. When should I use "equals" or "in"? (I have tried both) Peder Sefland >From Ingeborg.Hellemo at cc.uit.no Wed Dec 7 10:09:33 2005 From: Ingeborg.Hellemo at cc.uit.no (Ingeborg Hellemo) Date: Wed Dec 7 10:09:39 2005 Subject: [Nav-users] Don't get alerts based on Sub category In-Reply-To: Your message of "Tue, 06 Dec 2005 14:40:23 +0100." <s395a2f0.070(a)HVO-3.hivolda.no> Message-ID: <200512070909.jB799X5b051660(a)dis.cc.uit.no> peder.sefland(a)hivolda.no said: > My idea was that I should make some Public filters and Public filter groups > for my colleges at the computer dep. To make it easier for them to make alert > profiles. > So I thought that if we regisetred all the servers in their Sub category, it > would be easy to get all the alerts for the servers in that group (All the > Novell servers or Mail servers and so on.) > I have been trying to get alerts based on this idea, but with no success. I think we have the same problem. I have made a public filter, but when I include this in my personal filter group I don't receive alerts that match the filter. If I make my own filters or filtergroups things works as expected. Perhaps it has something to do with settings in the "Public Access" page? --Ingeborg

1 0

Statistics for ports with > 600Mb/s traffic
by kjetil.olsen＠usit.uio.no 05 Des '05

05 Des '05

We have a couple of GE-ports with quite heavy traffic, close to 700 Mb/s. NAV generates Cricket-configs to use SNMPv1-counters (32bit) when polling GE interfaces. But even when polling every minute, the counters loop when the traffic exceeds 600 Mb/s. Is there any plans to use SNMPv2-counters (64-bit) for GE-equipment?? All GE-equipment I have seen for the past years support 64-bit counters. The polling could then be done every 5 minutes without any problems as well. --Kjetil

2 1

by dlavigne6＠sympatico.ca 02 Des '05

02 Des '05

I've installed and configured nav on FreeBSD 6.0 using the FreeBSD port and modifying the configs according to Getting Started and the Install doc for RedHat. Haven't written the rewrite yet for https. When I point my browser to http://ip_address, I receive this error: Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/local/lib/python2.4/site-packages/mod_python/apache.py", line 454, in import_module f, p, d = imp.find_module(parts[i], path) ImportError: No module named nav The changes to httpd.conf follow. Any idea what I'm missing? Dru --- > Listen 192.168.1.117:80 > Listen 192.168.1.117:443 < LoadModule unique_id_module libexec/apache2/mod_unique_id.so < <IfDefine SSL> < </IfDefine> > LoadModule php4_module libexec/apache2/libphp4.so > LoadModule python_module libexec/apache2/mod_python.so > ServerName 192.168.1.117:80 < DocumentRoot "/usr/local/www/data" > DocumentRoot "/usr/local/nav/apache/webroot" > <Directory "/usr/local/nav/apache/webroot"> > Options Indexes FollowSymLinks ExecCGI > AllowOverride All > PythonPath "['/usr/local/include/python2.4','/usr/local/lib', '/usr/local/nav/lib/python', '/usr/local/nav/lib/python/nav', '/usr/local/nav/lib/python/nav/web', '/usr/local/lib/python2.4/site- packages/mod_python', '/usr/local/lib/python2.4', '/usr/local/lib/python2.4/site-packages/pygsl']" > AddHandler python-program .py > AddHandler cgi-script .cgi > SetHandler mod_python > PythonHandler apache > PythonDebug On > DirectoryIndex index.html index.html.var index.py index.cgi > SSLProtocol all > SSLCipherSuite HIGH:MEDIUM

2 1

Switch data isn't coming trough
by tom＠planetix.net 18 Nov '05

18 Nov '05

Hello, I'm Toni Syv?nen and I'm trying to set NAV to monitor a student house network. So far so good. But it seems that getDeviceData isn't working as it should. Database seems to be missing most of the switch ports. They are listed in getDeviceData's logs, but not in the database. When I checked the logs I found this: java.lang.ArrayIndexOutOfBoundsException: 1007 at no.ntnu.nav.getDeviceData.dataplugins.Swport.Swport.getVlanAllowHexString(Swport.java:229) at no.ntnu.nav.getDeviceData.dataplugins.Swport.Swport.getHexstring(Swport.java:201) at no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(SwportHandler.java:305) at DataContainersImpl.callDataHandlers(DataContainersImpl.java:63) at QueryNetbox.run(QueryNetbox.java:792) The switch is HP Procurve 2650 and NAV seems to detect it but fails to get all the information. Also I noticed that the database has list of vlan's but those are not listed in the Report-page. Hopefully we can get this fixed soon. Greetz, Toni "ToM" Syv?nen >From a.l.prois at usit.uio.no Mon Nov 21 15:29:48 2005 From: a.l.prois at usit.uio.no (=?ISO-8859-1?Q?Asbj=F8rn_Pr=F8is?=) Date: Mon Nov 21 15:30:04 2005 Subject: [Nav-users] Errors from collect-subtrees normal Message-ID: <Pine.SOL.4.63-L.0511211515450.23271(a)saruman.uio.no> Hello. The "collect-subtrees normal" cronjob keeps sending out mails like this : --- snip --- Date: Mon, 21 Nov 2005 15:13:10 +0100 From: Cron Daemon <root@navbox> To: Subject: Cron <navcron@navbox> $CRICKETDIR/cricket/collect-subtrees normal Error and the lines leading up to it: [21-Nov-2005 15:13:05 ] Retrieved data for loopback0 (15): 0,0,0,0,0,0 [21-Nov-2005 15:13:05 ] Retrieved data for loopback0 (15): 0,0,0,0,0,0 [21-Nov-2005 15:13:05 ] Retrieved data for dec 21143a pci fast ethernet (1): 3246422302,1302780726,0,0,3382367997,3399386702 [21-Nov-2005 15:13:05 ] Retrieved data for dec 21143a pci fast ethernet (1): 3246623089,1302984322,0,0,3382368390,3399387090 [21-Nov-2005 15:13:05*] Cannot update /usr/local/nav/cricket/cricket-config/../cricket-data//router-interfaces/device.uio.no/dec 21143a pci fast ethernet.rrd: illegal attempt to update using time 1132582385 when last update time is 1132582385 (minimum one second step) --- /snip --- device.uio.no is a cisco VPN3030, NAV is 3.0.0 final running on RHEL4. Anyone know whats causing it, and how to fix? Except sending crontab output to /dev/null.. #:) -Asbj?rn- >From john.m.bredal at ntnu.no Mon Nov 21 15:50:41 2005 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Mon Nov 21 15:50:03 2005 Subject: [Nav-users] Errors from collect-subtrees normal In-Reply-To: <Pine.SOL.4.63-L.0511211515450.23271(a)saruman.uio.no> References: <Pine.SOL.4.63-L.0511211515450.23271(a)saruman.uio.no> Message-ID: <4381DEC1.4010600(a)ntnu.no> Asbj?rn Pr?is wrote: > Hello. > The "collect-subtrees normal" cronjob keeps sending out mails like this : > --- snip --- > Date: Mon, 21 Nov 2005 15:13:10 +0100 > From: Cron Daemon <root@navbox> > To: Subject: Cron <navcron@navbox> $CRICKETDIR/cricket/collect-subtrees > normal > > Error and the lines leading up to it: > [21-Nov-2005 15:13:05 ] Retrieved data for loopback0 (15): 0,0,0,0,0,0 > [21-Nov-2005 15:13:05 ] Retrieved data for loopback0 (15): 0,0,0,0,0,0 > [21-Nov-2005 15:13:05 ] Retrieved data for dec 21143a pci fast ethernet > (1): > 3246422302,1302780726,0,0,3382367997,3399386702 > [21-Nov-2005 15:13:05 ] Retrieved data for dec 21143a pci fast ethernet > (1): > 3246623089,1302984322,0,0,3382368390,3399387090 > [21-Nov-2005 15:13:05*] Cannot update > /usr/local/nav/cricket/cricket-config/../cricket-data//router-interfaces/device.uio.no/dec > 21143a pci fast ethernet.rrd: > illegal attempt to update using time 1132582385 when last update time is > 1132582385 (minimum one second step) > --- /snip --- > > device.uio.no is a cisco VPN3030, NAV is 3.0.0 final running on RHEL4. > > Anyone know whats causing it, and how to fix? Except sending crontab > output to /dev/null.. #:) > > -Asbj?rn- > It seems like there is a redundant config-entry for this interface. If you check the config-file for router-interfaces/device.uio.no, I would suspect that you find either duplicates or an erroneous config of some kind. I can't say anymore until I get more details. -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, doesn't mean they're not after you." >From a.l.prois at usit.uio.no Mon Nov 21 15:59:33 2005 From: a.l.prois at usit.uio.no (=?ISO-8859-1?Q?Asbj=F8rn_Pr=F8is?=) Date: Mon Nov 21 15:59:44 2005 Subject: [Nav-users] Errors from collect-subtrees normal In-Reply-To: <4381DEC1.4010600(a)ntnu.no> References: <Pine.SOL.4.63-L.0511211515450.23271(a)saruman.uio.no> <4381DEC1.4010600(a)ntnu.no> Message-ID: <Pine.SOL.4.63-L.0511211556120.23271(a)saruman.uio.no> On Mon, 21 Nov 2005, John Magne Bredal wrote: > It seems like there is a redundant config-entry for this interface. If you > check the config-file for router-interfaces/device.uio.no, I would suspect > that you find either duplicates or an erroneous config of some kind. I can't > say anymore until I get more details. -- snip --- -bash-3.00# more /usr/local/nav/cricket/cricket-config/router-interfaces/device.uio.no/targets target --default-- snmp-host = 1.2.3.4 snmp-community = blingbling target "DEC 21143A PCI Fast Ethernet" order = 2 interface-index = 2 short-desc = "No description available" target "DEC 21143A PCI Fast Ethernet" order = 1 interface-index = 1 short-desc = "No description available" target all order = 3 targets = "dec 21143a pci fast ethernet;dec 21143a pci fast ethernet" --- /snip --- If this is incorrect, any idea why makecricketconfig.pl (?) generates it wrong? -Asbj?rn- >From john.m.bredal at ntnu.no Mon Nov 21 16:06:10 2005 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Mon Nov 21 16:05:30 2005 Subject: [Nav-users] Errors from collect-subtrees normal In-Reply-To: <Pine.SOL.4.63-L.0511211556120.23271(a)saruman.uio.no> References: <Pine.SOL.4.63-L.0511211515450.23271(a)saruman.uio.no> <4381DEC1.4010600(a)ntnu.no> <Pine.SOL.4.63-L.0511211556120.23271(a)saruman.uio.no> Message-ID: <4381E262.6020704(a)ntnu.no> Asbj?rn Pr?is wrote: > On Mon, 21 Nov 2005, John Magne Bredal wrote: > >> It seems like there is a redundant config-entry for this interface. If >> you check the config-file for router-interfaces/device.uio.no, I would >> suspect that you find either duplicates or an erroneous config of some >> kind. I can't say anymore until I get more details. > > > -- snip --- > -bash-3.00# more > /usr/local/nav/cricket/cricket-config/router-interfaces/device.uio.no/targets > > target --default-- > snmp-host = 1.2.3.4 > snmp-community = blingbling > > target "DEC 21143A PCI Fast Ethernet" > order = 2 > interface-index = 2 > short-desc = "No description available" > > target "DEC 21143A PCI Fast Ethernet" > order = 1 > interface-index = 1 > short-desc = "No description available" > > target all > order = 3 > targets = "dec 21143a pci fast ethernet;dec 21143a pci > fast ethernet" > --- /snip --- > > If this is incorrect, any idea why makecricketconfig.pl (?) generates it > wrong? > Cricket needs unique target-names, because that is what it uses to make rrd-filenames. As we see here, the two target-names are equal, and Cricket then tries to update the same rrd-file. The reason, I guess, is that the ifDesc oid returns the same interface-description for those two interfaces. We have experienced that before, and unfortunately there is no easy fix at the moment. -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, doesn't mean they're not after you." >From morten.vold at ntnu.no Mon Nov 28 14:42:34 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Mon Nov 28 14:59:03 2005 Subject: [Nav-users] Can't get a box off maintenance In-Reply-To: <436743C6.5040707(a)ntnu.no> References: <200511010811.jA18B0bO043199(a)duke.cc.uit.no> <436743C6.5040707(a)ntnu.no> Message-ID: <438B094A.1050608(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 01/11/2005 11:30, Morten Vold uttered: >>> I replaced the orginal box with a new one (Sorry. Should have >>> told you that). > I think I know what the problem is - the maintenanceOff-events are > posted using the device ID of the replaced device, but since this > device is no longer associated with the netbox instance, the system > still thinks the netbox is down. Of course, the problem was more complicated than that. Looks like the actual problem was in the event engine - I believe I've fixed it on trunk now :) - -- Morten Vold, ITEA, NTNU Tlf.nr: 735 98048 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDiwlJXxIl0kpcOkQRAjXuAKDktxt4bO6T7Nlgm7nw8F8OrXYu4wCdGVNi yuXOBTtVqVl4f3cgzm8DZJM= =lxHg -----END PGP SIGNATURE-----

1 0

replaced devices don't get updated
by kreide＠gmail.com 17 Nov '05

17 Nov '05

> But the device browser still shows the 12 Ports of the 2912 which > was removed, though the type if the device reports " cisco, > cat3524XL, Catalyst 3524 XL switch". > How do we get the new device registered? Sometimes it is necessary to remove the device from NAV and the re-add it. -- Kristian

1 0

Beginners problem
by smilisic＠carnet.hr 03 Nov '05

03 Nov '05

Problem is solved, cricket graphs shows statistics this time.. It was my error. I should run ./compile in cricket dir as navcron-user, not as a root. Running su - navcron was not enough, but su - navcron -s /bin/bash solved it :) Thanx all 4 help! Silvije Citat John Magne Bredal <john.m.bredal(a)ntnu.no>: > Hi, > > it seems like makecricketconfig does not find any data in the database > for some reason. Can you please send me the log makecricketconfig.pl > makes? This log should be in the mailbox to the user navcron. > > Silvije wrote: > > > >> > >> When you say there are no statistics, what do you mean exactly? Are > >> there empty graphs on your Cricket pages, or are there no links to any > >> graphs at all? > > > > > > There are no links at all, just Cricket warning saying: > > > > WARNING: This install of Cricket is a part of NAV-v3. When viewing the > > data, please note that we are not responsible for any anomalies on the > > network that you may see here. We are only displaying them. Any grief > > you may experience when using this install of Cricket is purely > > self-inflicted, and of no importance to us. If you however feel that we > > are helping you in any way, please feel free to send money to the > > editor. If you take this text seriously, don't > > > > and no graphs.. > > > >> Ok, I did a little checking, and it seems Debian packages the Python > >> Profiler as a separate package, under the non-free section (I don't know > >> why, but I assume it's because the profile module is released under some > >> other license than the rest of the Python library..?) > >> > >> Assuming you have the non-free section as part of your sources in > >> /etc/apt/sources.list, try running "apt-get install python-profiler" and > >> see whether NAV works after that. Cc: to Morten Werner, who is the NAV > >> Debian package maintainer. > >> > > > > Thanks for that, now it works without python errors :) > > > > Regards, > > > > Silvije Milisic, > > CARNet > > _______________________________________________ > > Nav-users mailing list > > Nav-users(a)itea.ntnu.no > > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > > > -- > John Magne Bredal > NTNU, ITEA - Nettgruppa > "Just because you're paranoid, doesn't mean they're not after you." > -- Ova poruka poslana je s CARNetovog webmail sustava --- http://webmail.carnet.hr/ --- >From john.m.bredal at ntnu.no Tue Nov 15 16:06:27 2005 From: john.m.bredal at ntnu.no (John Magne Bredal) Date: Tue Nov 15 16:05:44 2005 Subject: [Nav-users] Messages Message-ID: <4379F973.903(a)ntnu.no> https://beta.nav.ntnu.no/messages/set?netbox=26 velger den ene messagen som ligger der. trykker 'add equipment to message' f?r: Mod_python error: "PythonHandler messageshandler" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/messages/messageshandler.py", line 129, in handler output = commitplacement(req) File "/usr/local/nav/apache/webroot/messages/messageshandler.py", line 1076, in commitplacement raise "noe skjedde" noe skjedde -- Mads Vaagland ITEA systemdrift, NTNU via. -- John Magne Bredal NTNU, ITEA - Nettgruppa "Just because you're paranoid, doesn't mean they're not after you." >From morten.vold at ntnu.no Wed Nov 16 10:19:29 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Wed Nov 16 10:19:32 2005 Subject: [Nav-users] Messages In-Reply-To: <4379F973.903(a)ntnu.no> References: <4379F973.903(a)ntnu.no> Message-ID: <437AF9A1.6070207(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 15/11/2005 16:06, John Magne Bredal uttered: > https://beta.nav.ntnu.no/messages/set?netbox=26 > velger den ene messagen som ligger der. John-Magne, I appreciate you forwarding bug reports to nav-users, but don't forget that the list prefers English :) > File "/usr/local/nav/apache/webroot/messages/messageshandler.py", line > 1076, in commitplacement > raise "noe skjedde" > > noe skjedde This is a known bug, and as far as I know, it was fixed on the trunk in r3350. It should be available in the 3.0.1 release (we have no schedule for this release yet; the bug report comes from NTNU, who will be running bleeding edge NAV shortly). - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDevmhXxIl0kpcOkQRAr2iAJ9byaD+TJsU5G9hrXG4QHYrxfL3wwCeJr7T CqCXHakDnausoM3CyS1na2E= =IphL -----END PGP SIGNATURE----- >From lox at netzwerkplanet.de Wed Nov 16 18:53:05 2005 From: lox at netzwerkplanet.de (Christian Lox) Date: Wed Nov 16 18:54:37 2005 Subject: [Nav-users] cricket question Message-ID: <437B7201.10701(a)netzwerkplanet.de> Hi! I just managed to get an installation of NAV up and running. For test purposes I inserted some witches and routers into the database. When clicking "statistics" on the toolbox page, I notice there are not all device displayed: There is on Cisco 7507 in the DB which is displayed unter router-interfaces but not under router. Then there are two 2610, which also do not appear under router. One of them appears under router-interfaces, the other does not appear at all. Furthermore I am testing two switches which appear fine under switch-interfaces but not under switches. What am I doing wrong? Thanks, Christian -- you don't need eyes to see you need visions. >From lox at netzwerkplanet.de Thu Nov 17 14:13:09 2005 From: lox at netzwerkplanet.de (Christian Lox) Date: Thu Nov 17 14:14:49 2005 Subject: [Nav-users] replaced devices don't get updated Message-ID: <437C81E5.9080107(a)netzwerkplanet.de> Hi! In our initial test setup I had to replace a switch and the corresponding router interface. We had a Cisco 2912XL connected to a Fastethernet interface on a 7507 router. This morning the 2912 was replaced by a 3524 and the router interface now is a Gigabit interface. I edited the switch via "edit database". It was recognized as a 3524XL. So far so good. I would expect that the corresponding websites (like Device browser, statistics etc) get updated. But the device browser still shows the 12 Ports of the 2912 which was removed, though the type if the device reports " cisco, cat3524XL, Catalyst 3524 XL switch". How do we get the new device registered? Thanks, Christian

1 0

Can't get a box off maintenance
by morten.vold＠ntnu.no 01 Nov '05

01 Nov '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 01/11/2005 09:11, Borge Brunes uttered: >> I have a sneaking suspicion. Why did you put fp1A245-sw on >> maintenance? Did you change any modules in the box while it was on >> maintenance? > I replaced the orginal box with a new one (Sorry. Should have told > you that). I think I know what the problem is - the maintenanceOff-events are posted using the device ID of the replaced device, but since this device is no longer associated with the netbox instance, the system still thinks the netbox is down. I will try to find some time to fix this bug tomorrow. I'm guessing you're still running the bleeding edge from Subversion? ;) - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDZ0PGXxIl0kpcOkQRAn71AJ4tu0b7AMRB5AKd4h9QV98bSwK+uQCgmmop 9H/sa5lsSTHGVRI3C18hLT0= =nNtc -----END PGP SIGNATURE----- >From odd.hauge at hiMolde.no Thu Nov 3 08:56:37 2005 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Thu Nov 3 08:56:49 2005 Subject: [Nav-users] Moduke down and up again Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C27D0E16(a)stam.himolde.no> Hi. For a Cisco 3750Metro GSW I get the following messages. This is an automatically generated message from NAV: Module 11, box molde-gw2.uninett.no (158.38.0.65) does not reply to request and is declared down. Detected 2005-11-02 20:36:29. And after some hours: This is an automatically generated message from NAV: Module 11, box molde-gw2.uninett.no (158.38.0.65) is up again. Since: 2005-11-03 02:36:30. Even if the module is declared down I can ping the ip-address. Any ideas anyone ? Regards Odd Arne Hauge

1 0

Can't get a box off maintenance
by Borge.Brunes＠cc.uit.no 01 Nov '05

01 Nov '05

I took a switch off maintenance. After a couple of minutes I recived 2 messages: - One from cron: "Box fp1A245-sw.infra.uit.no (301) was on unscheduled maintenance, taking off maintenance now..." - One from alertengine: "Dette er en automatisk generert melding fra NAV: fp1A245-sw.infra.uit.no is no longer on maintenance, since 2005-10-31 15:05:00" After that I recive the same to messages every 5 minutes :-( It has been going on for 16 houes now... Suggestions anyone? regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

2 1

Problem with case sensitive hostname/sysname
by odd.hauge＠hiMolde.no 31 Okt '05

31 Okt '05

Hi. Is there any solution to this "problem"... I'm having the same issue, and it's a bit annoying. Regards Odd Arne Hauge > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Borge Brunes > Sent: Friday, March 11, 2005 2:41 PM > To: nav-users(a)itea.ntnu.no > Cc: borge(a)cc.uit.no > Subject: [Nav-users] Problem with case sensitive hostname/sysname > > An old problem from The Beginning is back: > > eventEngine EVENTQ_MONITOR_TASK-6-RUN Got event: e=4153 d=108 > n=32 t=info s=x [dnsname=piffi.cc.uit.no] [sysname=PIFFI] > [alerttype=dnsMismatch] alertEngine User-6-sendSMS: SMS XXXX: > piffi.cc.uit.no does not match piffi.cc.uit.no (This is an > M$-box and there is no easy way tho change the sysname) > > regards, > > -- > Borge Brunes, Computer Center, University of Tromso, Norway > http://www.cc.uit.no/~borge/ | http://www.freebsd.org > > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

2 1

one more time...
by Borge.Brunes＠cc.uit.no 31 Okt '05

31 Okt '05

woj(a)tstd.pl said: > last time I tried to get such statistics it was problematic, because cricket > module couldn't do it automatically. Something changed? I don't know, but it have always(?) worked for us with category=GW and netsnmp 5.2.1 innstalled on the linux-host. I also use sysservices 79 in snmpd.conf, but I don't think it's necessary. regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

one more time...
by Borge.Brunes＠cc.uit.no 31 Okt '05

31 Okt '05

woj(a)tstd.pl said: > 2. Was anybody successful with monitoring linux boxes with MetaNav? No problem. regards, -- B?rge Brunes, IT-avdelingen, Universitetet i Troms? http://www.cc.uit.no/~borge/ http://www.freebsd.org

2 1

one more time...
by morten.vold＠ntnu.no 31 Okt '05

31 Okt '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 27/10/2005 21:09, Wojciech Kozicki uttered: > 1. Is debian package up to date? I was using it before, and I would > like to try it again. I was using SID, maybe this time it will go on > stable? What is best distro to install NAV? To have no problems with > upgrades... As far as I know, the Debian package maintainer (Morten Werner) has not yet updated the Debian package to version 3.0.0. I do know that Uninett want to put more force and support behind the Debian package. Their plan is to roll out Debian based servers to Norwegian University Colleges, readily configured for services like e-mail, network monitoring and such. > 2. Was anybody successful with monitoring linux boxes with MetaNav? What do you mean, exactly? (BTW: The name is NAV - Network Administration Visualized. MetaNav is the NAV web site). - -- Morten Vold, ITEA, NTNU -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDZdzlXxIl0kpcOkQRAgqbAKCZ5Cd4k1u2dGdIPeVINYPDMlgXhQCcCFLk Ykd24ffCVJPZdeyEbOPpZPY= =ghyr -----END PGP SIGNATURE----- >From woj at tstd.pl Mon Oct 31 10:24:57 2005 From: woj at tstd.pl (Wojciech Kozicki) Date: Mon Oct 31 10:25:13 2005 Subject: [Nav-users] one more time... In-Reply-To: <4365DCE6.7080403(a)ntnu.no> References: <200510272109.55787.woj(a)tstd.pl> <4365DCE6.7080403(a)ntnu.no> Message-ID: <200510311024.58208.woj(a)tstd.pl> On Monday 31 of October 2005 09:59, Morten Vold wrote: > On 27/10/2005 21:09, Wojciech Kozicki uttered: > > 2. Was anybody successful with monitoring linux boxes with MetaNav? > > What do you mean, exactly? I mean - gather network interfaces statistics (for example) > (BTW: The name is NAV - Network > Administration Visualized. MetaNav is the NAV web site). Ok. regards -- Woj

1 0

Beginners problem
by morten.vold＠ntnu.no 20 Okt '05

20 Okt '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 17/10/2005 20:57, Silvije uttered: > # ./nav status cricket > cricket: Up > Does nav have to be in $PATH? Only if it is convenient for you. On the other hand, I'm guessing that on a Debian installation you can use "invoke-rc.d nav" to call the nav init script. When you say there are no statistics, what do you mean exactly? Are there empty graphs on your Cricket pages, or are there no links to any graphs at all? > This is what I get: > > # python -c 'import profile' > Traceback (most recent call last): > File "<string>", line 1, in ? > ImportError: No module named profile Ok, I did a little checking, and it seems Debian packages the Python Profiler as a separate package, under the non-free section (I don't know why, but I assume it's because the profile module is released under some other license than the rest of the Python library..?) Assuming you have the non-free section as part of your sources in /etc/apt/sources.list, try running "apt-get install python-profiler" and see whether NAV works after that. Cc: to Morten Werner, who is the NAV Debian package maintainer. On a side note: I don't know why the profile module is used in the production release, but one of the original authors of the IP Device Center has promised to look into it. > This is solved, but only one router is drawn and link to another > unknown device... I have seeded into database one router and 2 > switches but switches dont appear in graph. Ok, on this matter I will have to ask Kristian to help, since he's the most knowledgeable on the Traffic Map (having authored it, and all ;) ) Kristian? - -- Morten Vold NTNU ITEA -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDVJnkXxIl0kpcOkQRAqozAJ4jS9LivAGdruuPTzvjbFOmRea86QCgtnOV YcF4CpPUqArTRd/I1W7OUWg= =na9/ -----END PGP SIGNATURE----- >From kreide at gmail.com Tue Oct 18 00:50:04 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Oct 18 08:50:10 2005 Subject: [Nav-users] Beginners problem In-Reply-To: <4353F403.4070007(a)carnet.hr> References: <4353F403.4070007(a)carnet.hr> Message-ID: <b4c110fd0510172350r67599f4crdd324d0e8fc0a397(a)mail.gmail.com> > This is solved, but only one router is drawn and link to another unknown > device... I have seeded into database one router and 2 switches but > switches dont appear in graph. Switches are not shown on the top level actually, but you can click on the router icon to navigate further down in the network (you might have to be logged in for this to work). -- Kristian

2 1

box on maintenance
by Borge.Brunes＠cc.uit.no 19 Okt '05

19 Okt '05

Is it possible to put a box on maintenance which has status down? How? regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

Group access in NAV
by morten.vold＠ntnu.no 18 Okt '05

18 Okt '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 17/10/2005 15:22, Reier Johan R?dland uttered: > web_access for > ^/(report|status|emotd|alertprofiles|machinetracker|browse|preferences|cricket)/? Don't forget: web_access for ^/(vlanPlot|navAdmin)/? > When we put a user in that group he can also change the Traffic Map > and save the new layout! Bug?? Yep. I just checked this with Kristian, and it seems to be an unfortunate oversight on our part. The Traffic Map assumes that any authenticated user is an adminstrator :( > Are there some documentation on how to build new groups with > different priveleges? What do the different Regular expressions do? It might not be very well documented, but it should be straightforward. The /web_access/ privilege is used to grant access to resources on the web server, by matching the URL requested by the browser against the regular expression in the privilege target. If the URL requested by the browser matches any of the regular expressions in the web_access privileges of the user's groups, access is granted. If not, access is denied, and the user is redirected to the NAV login page. So web_access for ^/(report|status|emotd|alertprofiles|machinetracker|browse|preferences|cricket)/? grants access to any URL beginning with a slash, followed by any of the pipe separated words, then possibly followed by another slash (I'm assuming you know your regexp here). > What are the use of "Member of the following organizations"? I don't think this is actually used by any part of NAV right now, but the idea is to use this in the future as an aid to further limit what information users have access to. The organizational tree you can select from is the one that has been entered in editdb, and the same one which is referred to by IP devices registered in the NAV database. Each IP device can belong to a given organizational unit, and so can network prefixes. So, what we hope to have ready in NAV 3.1 is a system where the administrator(s) can configure privileges which allow users to use the machine tracker to track IP addresses only within the prefixes belonging to their own organizational units, or view detailed information only about IP devices owned by their own organizational units. I also see a need to maybe map these organizational units to organizational units in an LDAP tree, so that NAV will automatically know which organizational units LDAP-authenticated users belong to. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDVKzgXxIl0kpcOkQRAsgbAKCAayEN5U1GzadG88E9jsc8Z/96XwCeNQbr 72HoGUIDZAXeYir0aHagZLA= =bDwB -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Tue Oct 18 11:09:23 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Tue Oct 18 10:09:31 2005 Subject: [Nav-users] Group access in NAV In-Reply-To: <Pine.LNX.4.63-L.0510171428050.21307(a)vekter.uio.no> References: <Pine.LNX.4.63-L.0510171428050.21307(a)vekter.uio.no> Message-ID: <4354ADB3.5080606(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 17/10/2005 15:22, Reier Johan R?dland uttered: > Are there some documentation on how to build new groups with different > priveleges? What do the different Regular expressions do? > What are the use of "Member of the following organizations"? I forgot to mention that some of the existing and future concepts surrounding the privilege system are mentioned in the tigaNAV report: http://metanav.ntnu.no/tigaNAV/tigaNAV.pdf - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDVK2zXxIl0kpcOkQRAqXKAJ9MpoJS84n7oIAtkn2VRzOZLWrAswCghz0b 6C5cefwuGRA1FDbXscnLt5o= =/zer -----END PGP SIGNATURE----- >From magnus at ntnu.no Tue Oct 18 12:29:12 2005 From: magnus at ntnu.no (Magnus Nordseth) Date: Tue Oct 18 11:28:36 2005 Subject: [Nav-users] Beginners problem In-Reply-To: <435499E5.9080807(a)ntnu.no> References: <4353F403.4070007(a)carnet.hr> <435499E5.9080807(a)ntnu.no> Message-ID: <20051018092912.GA9208(a)stud.ntnu.no> Morten Vold: > On a side note: I don't know why the profile module is used in the > production release, but one of the original authors of the IP Device > Center has promised to look into it. It is safe to just remove the line import profile This will be fixed in the next NAV release. -- Magnus Nordseth

1 0

java.sql.SQLException: ERROR
by Jan.Susegg＠hint.no 18 Okt '05

18 Okt '05

Can anyone tell me why I receive the error message: SQLException while posting alert: java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression in my eventEngine.log. The only alerts I receive is software and firmware changes and not box down or anything else. Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Alert processing done, processed 1, queue size 34 Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Box down: 158.38.xx.xx Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Added alert: e=7731 d=222 n=117 t=boxState s=x [status=down] Okt 18 08:45:53 2005 eventEngine DEV_DB-6-POSTALERT Posting alert: e=7731 d=222 n=117 t=boxState s=x [status=down] Okt 18 08:45:53 2005 eventEngine DEV_DB-6-POSTALERT SQLException while posting alert: java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression. Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-4-CALLBACK While posting netel down alert, PostAlertException: Got SQLException: ERROR: More than one tuple returned by a subselect used as an expression. Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-HANDLE Scheduling callback in 883 ms (0 s) Okt 18 08:45:53 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Alert processing done, processed 1, queue size 34 >From kreide at gmail.com Tue Oct 18 01:16:43 2005 From: kreide at gmail.com (Kristian Eide) Date: Tue Oct 18 09:16:48 2005 Subject: [Nav-users] java.sql.SQLException: ERROR In-Reply-To: <8A65B72C71E7484FBE1862045AAC5A8FB73BC2(a)embla.ansatt.hint.no> References: <8A65B72C71E7484FBE1862045AAC5A8FB73BC2(a)embla.ansatt.hint.no> Message-ID: <b4c110fd0510180016ud40dff9l3c8fbb736c7d2662(a)mail.gmail.com> > Can anyone tell me why I receive the error message: SQLException while > posting alert: java.sql.SQLException: ERROR: More than one tuple > returned by a subselect used as an expression in my eventEngine.log. The Yes, this is most likely caused by too many entries in the alerttype table. My suggestion would be to delete all entries from that table and re-run the INSERT statements from manage.sql. -- Kristian

1 0

Beginner problem
by silvije.milisic＠carnet.hr 17 Okt '05

17 Okt '05

Hi! I am new to NAV! I have installed it from debian package. I did some database seeding and i get SNMP data from router, but: 1. I dont get any Statistics 2. When I click in Network explorer on my router icon I get Mod_python error: "PythonHandler nav.web.devBrowser.dispatcher" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 287, in HandlerDispatch log=debug) File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 457, in import_module module = imp.load_module(mname, f, p, d) File "/usr/lib/python2.3/site-packages/nav/web/devBrowser/dispatcher.py", line 33, in ? import profile ImportError: No module named profile and 3. Traffic Map does not draw anything, I just get Java loading icon Please some hint ;) Thanx, Silvije >From Vidar.Faltinsen at uninett.no Mon Oct 10 16:25:15 2005 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Mon Oct 10 15:25:57 2005 Subject: [Nav-users] Minor bug user account Message-ID: <Pine.LNX.4.63.0510101511400.1560(a)valentin.uninett.no> Morten, In the user admin tool when you add a new user, a slightly confusing thing happens. Say I am logged in as faltin with administative privilege. Then I create the account joe, and fill in full name and password and submits. On the following page the login: is replaced with faltin, not joe... So it _looks_ as if I am altering my own user account instead of creating the new account for joe. bug? ho-ho - Vidar >From odd.hauge at hiMolde.no Mon Oct 10 17:39:50 2005 From: odd.hauge at hiMolde.no (Hauge Odd Arne) Date: Mon Oct 10 16:39:57 2005 Subject: [Nav-users] Alertengine Message-ID: <8EEE7738AEDF6947B3E5508A0244D1C26A09B5(a)stam.himolde.no> Hi. I cannot start AlertEngine. Seems like some problem with the Pg library on my installation. The error message in the logfile is: Uncaught exception from user code: DBD::Pg initialisation failed: Can't locate object method "driver" via package "DBD::Pg" at /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.pm line 747. Perhaps the capitalisation of DBD 'Pg' isn't right. at /usr/lib/perl5/site_perl/5.8.6/NAV/AlertEngine/Engine.pm line 53 at /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.pm line 753 DBI::install_driver('DBI', 'Pg') called at /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.pm line 573 DBI::connect('DBI', 'dbi:Pg:dbname=navprofiles;host=\'localhost\'', 'navwrite', 'some-password', 'undef') called at /usr/lib/perl5/site_perl/5.8.6/NAV/AlertEngine/Engine.pm line 53 NAV::AlertEngine::Engine::new('NAV::AlertEngine::Engine', 'HASH(0x8d40074)') called at ./alertengine.pl line 31 Cheking if DBD:PG is installed: # perl -MCPAN -e 'install DBD::Pg' CPAN: Storable loaded ok Going to read /root/.cpan/Metadata Database was generated on Thu, 30 Jun 2005 00:00:19 GMT DBD::Pg is up to date. Any suggestion anyone ? - odd arne hauge

2 1

Vlan problems, traffic map, network explorer
by allmanj＠cp.dias.ie 13 Okt '05

13 Okt '05

Hi - i'm having two problems, which i suspect are related. I have just installed nav (debian package, version 2+3.0rc1-3) and set it up according to the docs. I have added our router and a few of our switches to the database but when i visit the traffic map, all i see is the router. Ditto for the network explorer. What exactly is required for devices to show up? I then noticed that it wasn't picking up the vlans correctly when i looked in reports. They're all set to blank. I've added one router which is a cisco 7204vxr, one cisco 2900 switch and one dell Powerconnect 5224 switch. Based on previous posts, i looked in the swport table in the manage database and can confirm that it has picked up the correct vlans from one of our switches at least. getBoksMacs.log contains lines like these: Oct 13 16:10:03 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Missing swportid for ifindex 25 on boks: cisco0 Oct 13 16:10:03 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Querying vlan: 1, MACs: 56 Mappings: 22 Blocked: 0 / 1 Oct 13 16:10:03 2005 getBoksData_01 QUERY_NETBOX-6-MAC_ENTRY Fetching vlan: 2 It has lines like that for all of our vlans. I'm more than willing to dig through logs and show you anything relevant. I really like the look of nav and want to be able to use it properly. Anything you can do to help would be greatly appreciated. Thanks, John Allman >From Vidar.Faltinsen at uninett.no Mon Oct 17 11:40:43 2005 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Mon Oct 17 10:40:49 2005 Subject: [Nav-users] machine tracker In-Reply-To: <2870BA02E1D7E14CA524C38AD06CAB7713593F(a)mailit.northwood.edu> References: <2870BA02E1D7E14CA524C38AD06CAB7713593F(a)mailit.northwood.edu> Message-ID: <Pine.LNX.4.63.0510171035540.9230(a)valentin.uninett.no> On Sun, 9 Oct 2005, Kimalat, Kipngetich wrote: > hello, > i have just installed NAV 3.0 and whats steps are there to use the machine tracker? I am not sure where you are in the post-install process; but you need to seed the NAV database, of course. More info on http://metanav.ntnu.no/moin.cgi/SeedEssentials After you have given necessary seed info on your routers and switches, gDD (getDeviceData) will start to collect information from the devices. The arp logger and cam logger will in turn collect and store arp and cam data. With this in place you can use the machine tracker to track live and historical data regarding an ip address and in turn (or directly) a mac address. Hope this answers your question. best regards - Vidar

1 0

Over 100% used ip-addresses
by peder.sefland＠hivolda.no 13 Okt '05

13 Okt '05

When i click on the link "IP address scope - graphical view", in one of my subnet 114% of the ip-addresses are used. How is that possible? Maybe I should start to use IPv6 on this subnett :-) Peder Sefland

1 0

Installation of NAV 3.0.0 on CentOS 4.1
by roger.aas＠hsh.no 12 Okt '05

12 Okt '05

I have reworked the installation description for NAV 3.0.0 on Red Hat Enterprise Linux 4 AS Update 1 (phew, long name...) to include installing on CentOS 4.1. CentOS is a free version of RHEL and can be found here: http://www.centos.org/ I have also updated some of the packages to newer versions, most notably Java from 1.4.2 to 1.5.0 (after a recommendation from Kristian Eide) and Tomcat from 5.0.28 to 5.5.12. Same link as before: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 Regards, Roger -- Roger Aas Stord/Haugesund College

1 0

pping problem
by magnus＠ntnu.no 10 Okt '05

10 Okt '05

Borge Brunes: > pping is dying with the following message: > What could be wrong? Some exception-handling seem to have been removed... Try the attached patch, you should then get a entry in your log stating which host the pinger fails on. We can continue debug from there... -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc

1 0

Alertengine
by odd.hauge＠hiMolde.no 10 Okt '05

10 Okt '05

Problem solved. Downloaded the DBD::Pg library and reinstalled it. Sorrow bothering you. Cheers Odd Arne > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Hauge Odd Arne > Sent: Monday, October 10, 2005 4:40 PM > To: nav-users(a)itea.ntnu.no > Subject: [Nav-users] Alertengine > > Hi. > > I cannot start AlertEngine. Seems like some problem with the > Pg library on my installation. The error message in the logfile is: > Uncaught exception from user code: > DBD::Pg initialisation failed: Can't locate object > method "driver" via package "DBD::Pg" at > /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.p > m line 747. > > Perhaps the capitalisation of DBD 'Pg' isn't right. at > /usr/lib/perl5/site_perl/5.8.6/NAV/AlertEngine/Engine.pm line > 53 at > /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.pm line > 753 > DBI::install_driver('DBI', 'Pg') called at > /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi/DBI.p > m line 573 > DBI::connect('DBI', > 'dbi:Pg:dbname=navprofiles;host=\'localhost\'', 'navwrite', > 'some-password', 'undef') called at > /usr/lib/perl5/site_perl/5.8.6/NAV/AlertEngine/Engine.pm line 53 > NAV::AlertEngine::Engine::new('NAV::AlertEngine::Engine', > 'HASH(0x8d40074)') called at ./alertengine.pl line 31 > > > Cheking if DBD:PG is installed: > > # perl -MCPAN -e 'install DBD::Pg' > CPAN: Storable loaded ok > Going to read /root/.cpan/Metadata > Database was generated on Thu, 30 Jun 2005 00:00:19 GMT > DBD::Pg is up to date. > > > Any suggestion anyone ? > > - odd arne hauge > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

1 0

problems with eventengine
by Jan.Susegg＠hint.no 10 Okt '05

10 Okt '05

The eventEngine reports the following error message in eventEngine.log Okt 10 08:45:12 2005 eventEngine BOX_STATE_EVENTHANDLER-6-CALLBACK Added alert: e=7731 d=222 n=117 t=boxState s=x [status=down] Okt 10 08:45:12 2005 eventEngine DEV_DB-6-POSTALERT Posting alert: e=7731 d=222 n=117 t=boxState s=x [status=down] Okt 10 08:45:12 2005 eventEngine DEV_DB-6-POSTALERT SQLException while posting alert: java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression. Okt 10 08:45:12 2005 eventEngine BOX_STATE_EVENTHANDLER-4-CALLBACK While posting netel down alert, PostAlertException: Got SQLException: ERROR: More than one tuple returned by a subselect used as an expression. Okt 10 08:45:12 2005 eventEngine BOX_STATE_EVENTHANDLER-6-HANDLE Scheduling callback in 120587 ms (120 s) Does anyone know how to fix this? NAV doesn't report box down, but I know that I have a box down. >From Borge.Brunes at cc.uit.no Mon Oct 10 14:08:59 2005 From: Borge.Brunes at cc.uit.no (Borge Brunes) Date: Mon Oct 10 13:10:34 2005 Subject: [Nav-users] pping problem Message-ID: <200510101108.j9AB8xES002217(a)duke.cc.uit.no> pping is dying with the following message: [2005-10-09 11:25:24] pping.py:main:172 [Notice] 330 hosts checked in 9.957 secs. 1 hosts currently marked as down. Exception in thread sender: Traceback (most recent call last): File "/usr/local/lib/python2.4/threading.py", line 442, in __bootstrap self.run() File "/usr/local/lib/python2.4/threading.py", line 422, in run self.__target(*self.__args, **self.__kwargs) File "/usr/local/nav/lib/python/nav/statemon/megaping.py", line 261, in _sendRequests mySocket.sendto(packet, (host.ip, 0)) error: (64, 'Host is down') Exception in thread getter: Traceback (most recent call last): File "/usr/local/lib/python2.4/threading.py", line 442, in __bootstrap self.run() File "/usr/local/lib/python2.4/threading.py", line 422, in run self.__target(*self.__args, **self.__kwargs) File "/usr/local/nav/lib/python/nav/statemon/megaping.py", line 186, in _getResponses rd, wt, er = select.select([self._sock], [], [], timeout) error: (4, 'Interrupted system call') What could be wrong? -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

Bug "Report - Room search"
by Borge.Brunes＠cc.uit.no 10 Okt '05

10 Okt '05

There is a bug in the report "Reports - Room search". If I do a search? on my room tf2437 I got 24 hits The same (advanced) search? based on the report "All IP Devices" gives me 42 hits ?https://nav.uit.no/report/netbox2?roomid=tf2437&op_roomid=like ?https://nav.uit.no/report/netbox?op_roomid=like&adv=1&roomid=tf2437 Fix: use "netbox" instead of "netbox2" in the report. regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

1 0

machine tracker
by kimalat＠northwood.edu 10 Okt '05

10 Okt '05

hello, i have just installed NAV 3.0 and whats steps are there to use the machine tracker? thanks kip

1 0

help with installation
by MLaTurner＠CompuNetwork.Net 07 Okt '05

07 Okt '05

Is there a "step-by-step" guide for installing Nav3 on RedHat 9.0?? I am most likely in over my head . . .

2 1

Problem with the radius-checker in servicemon
by magnus＠ntnu.no 05 Okt '05

05 Okt '05

Borge Brunes: > I try to start monitoring a radius-service using servicemon in NAV. > Added the service to a server and all looks fine in the > "Service availability": > Handler radius > Status Up > > But the servicemon.log says: > db.py:getCheckers:226 [Critical] no such checker: radius > > > Why is the "Service availability" wrong and what's wrong > with the radius-checher? I think this means (it's been a while since I looked at the code) that the servicemonitor was unable to load the radius-checker module. The most appearant reason would be that the radius-checker depends on some python radius module. The actual radius-checker is located in the lib/python/nav/statemon/checker directory. I think you can figure out the dependencies from that. Also, there is a utility called serviceChecker.py or something similar that can assist you in debugging what this checkers actually do. If you look at the service availability, it probably don't contain any data, which means it hasn't been able to measure anything. The service status should have been 'Unknown', but I don't think our data model supports i at the time. HTH, -- Magnus Nordseth

1 0

Web page of NAV 3.0.0 still says beta
by roger.aas＠hsh.no 05 Okt '05

05 Okt '05

A "cosmetic" error on the web-page of NAV 3.0.0, it still says "Welcome to NAV v3.0 _beta_!". Something to fix for 3.0.1? :-) Regards, Roger --- Roger Aas Stord/Haugesund College >From Vidar.Faltinsen at uninett.no Mon Sep 19 02:44:07 2005 From: Vidar.Faltinsen at uninett.no (Vidar Faltinsen) Date: Mon Sep 19 01:44:12 2005 Subject: [Nav-users] Release-notice: NAV 3.0.0 :-)) In-Reply-To: <432AD483.40701(a)ntnu.no> References: <432AD483.40701(a)ntnu.no> Message-ID: <Pine.LNX.4.63.0509190141110.5381(a)valentin.uninett.no> > NAV 3.0.0 is now finally available for download at > http://metanav.ntnu.no/ :-) Thanks, Morten. Very good work. - Vidar

2 1

SV: [Nav-users] Alertengine email sender machine name != real
by roger.aas＠hsh.no 05 Okt '05

05 Okt '05

The DNS data is correct for both servers so that is not the problem here. - Roger Peder Magne Sefland wrote: > Maybe some information is collected from dns and the other is from > machine name? > > Are they the same? > > Peder > > >>>>Roger Aas <roger.aas(a)hsh.no> 29.09.2005 11:20:53 >>> > > I get this email from Alertengine: > > > X-Auth-No: > > Return-Path: <navcron(a)nav3.hsh.no> > > Received: from sentinel.hsh.no not authenticated [158.37.208.20] > > by posthus.hsh.no with NetMail SMTP Agent $Revision: 3.22.1.16 > $ on Novell NetWare; > > Thu, 29 Sep 2005 10:41:26 +0200 > > Received: from artifact.hsh.no ([158.37.35.10]) > > by sentinel.hsh.no (SMSSMTP 4.1.7.33) with SMTP id > M2005092910483300240 > > for <roger(a)posthus.hsh.no>; Thu, 29 Sep 2005 10:48:33 +0200 > > Received: from sentinel.hsh.no (sentinel.hsh.no [158.37.208.20]) > > by artifact.hsh.no (8.9.3 (PHNE_28760)/8.9.3) with SMTP id > KAA07954 > > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:33 +0200 > (METDST) > > Received: from nav3.hsh.no ([158.37.208.25]) > > by sentinel.hsh.no (SMSSMTP 4.1.7.33) with SMTP id > M2005092910483200238 > > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:32 +0200 > > Received: from nav3.hsh.no (nav3.hsh.no [127.0.0.1]) > > by nav3.hsh.no (8.13.1/8.13.1) with ESMTP id j8T8mWdi008206 > > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:32 +0200 > > Received: (from navcron@localhost) > > by nav3.hsh.no (8.13.1/8.13.1/Submit) id j8T8mWdW008203; > > Thu, 29 Sep 2005 10:48:32 +0200 > > Date: Thu, 29 Sep 2005 10:48:32 +0200 > > Message-Id: <200509290848.j8T8mWdW008203(a)nav3.hsh.no> > > From: alertengine(a)nav.hsh.no > > To: roger.aas(a)hsh.no > > Subject: Box haugesund-auditoriume-ap.hsh.no is up > > > > This is an automatically generated message from NAV: > > > > Box haugesund-auditoriume-ap.hsh.no (158.37.35.132) is up since > 2005-09-29 10:48:09. > > As you can see it is only the "From:" header line that says > "nav.hsh.no", the rest of > the headers give the correct name for the server "nav3.hsh.no". Anyone > know where this > is happening? Some config I have missed? Or a small bug lurking > somewhere? Or is it just > a cosmetic thing since you are not supposed to answer such an email? > Since I have called > the NAV 2.1.5 server for nav.hsh.no it gave me a small moment of > confusion... :-) > > - Roger >

1 1

Urgent: SMS sending problem
by roger.aas＠hsh.no 05 Okt '05

05 Okt '05

I was planning to get NAV 3 into service soon. So the next thing I needed to test is that NAV sends SMS'es to the person that is on duty. But I do not get this to work. Everytime I start NAV I get an email like this: > From: navcron(a)nav3.hsh.no > To: roger(a)hsh.no > Subject: smsd database connection problem > > > Status: 03.10.2005 10:29:13 PG_conn=SCALAR(0x826d464) 1 Reset > > Error was: > server closed the connection unexpectedly > This probably means the server terminated abnormally > before or while processing the request. The gammu program by itself works. I can do a command like this: echo Test | gammu nothing --sendsms TEXT 91799053 and I receive an SMS. If I use the test functionality of smsd.pl like this: /usr/local/nav/bin/smsd.pl -t 91799053 I do _not_ get an SMS and it prints just a "0" on the console. Can someone please help me with this. This is the function I need working to start using NAV 3. Best regards, Roger -- Roger Aas Stord/Haugesund College

1 1

Error in report tool "Trunked core switch ports"
by odd.hauge＠hiMolde.no 05 Okt '05

05 Okt '05

I'm having the same error messages as you Roger. I guess this can have something to do with the version of postgres we are using. I have installed Fedora Core 4 which comes with ver. 8.0.3 of postgres. I guess RHEL4 comes with ver 8 to. And I believe boolean expressions are handled in a different way in version 8 of postgres than in ver. 7. But I'm not a database expert. But if you edit /usr/local/nav/etc/report/front.html and replaces trunk=1 with trunk=t in line 80 the report works. The other "error" you reported earlier can be avoid by editing /usr/local/nav/etc/report/report.conf. Change line 290 from: GROUP BY roomid,sysname,host(ip),catid,orgid,val,netbox.netboxid,prefixid"; to GROUP BY roomid,sysname,host(ip),catid,orgid,val,netbox.netboxid,netbox.ip,prefix id"; Nice if someone of the devolpers can comment this. Cheers Odd Arne Hauge Molde University College > -----Original Message----- > From: nav-users-bounces(a)itea.ntnu.no > [mailto:nav-users-bounces@itea.ntnu.no] On Behalf Of Roger Aas > Sent: Monday, October 03, 2005 1:34 PM > To: nav-users(a)itea.ntnu.no > Subject: [Nav-users] Error in report tool "Trunked core switch ports" > > Nav version 3.0.0 > > "Toolbox -> Report -> Core Switches/Trunked core switch > ports" gives me this error: > > Configuration error! The report generator is not able to do > such things. > ERROR: operator does not exist: boolean = integer > HINT: No operator matches the given name and argument type(s). > You may need to add explicit type casts. > SELECT > b1.sysname,s1.interface,m1.module,s1.port,s1.link,s1.speed,s1. > duplex,s1.media,s1.trunk,vlan.vlan,s1.portname,b2.sysname > AS to_netboxid,m2.module AS > remote_module,s1.swportid,b1.netboxid AS netboxid,b1.catid > FROM swport AS s1 JOIN module AS m1 USING (moduleid) JOIN > netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON > (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON > (s1.swportid=swportvlan.swportid AND (trunk=false OR trunk IS > NULL)) LEFT JOIN vlan using(vlanid) LEFT JOIN swport AS s2 ON > (s1.to_swportid=s2.swportid) LEFT JOIN module AS m2 ON > (s2.moduleid=m2.moduleid) WHERE s1.trunk = 1 AND b1.catid = 'SW' > ORDER BY b1.sysname,module,port LIMIT 100 OFFSET 0 > > I sent earlier an email about another error I got on another > report tool, when sorting on IP-address on servers. I have > not received any hints to what could be the problem there. > > httpd 2.0.52 > jakarta-tomcat 5.0.28 > java j2sdk1.4.2_08 > perl 5.8.5 > php 4.3.9 > postgresql 7.4.8 > python 2.3.4, mod_python 3.1.3 > > Regards, > Roger > > -- > Roger Aas > Stord/Haugesund College > > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >

3 2

Error in report tool "Trunked core switch ports"
by roger.aas＠hsh.no 03 Okt '05

03 Okt '05

Nav version 3.0.0 "Toolbox -> Report -> Core Switches/Trunked core switch ports" gives me this error: Configuration error! The report generator is not able to do such things. ERROR: operator does not exist: boolean = integer HINT: No operator matches the given name and argument type(s). You may need to add explicit type casts. SELECT b1.sysname,s1.interface,m1.module,s1.port,s1.link,s1.speed,s1.duplex,s1.media,s1.trunk,vlan.vlan,s1.portname,b2.sysname AS to_netboxid,m2.module AS remote_module,s1.swportid,b1.netboxid AS netboxid,b1.catid FROM swport AS s1 JOIN module AS m1 USING (moduleid) JOIN netbox AS b1 USING (netboxid) LEFT JOIN netbox AS b2 ON (to_netboxid=b2.netboxid) LEFT JOIN swportvlan ON (s1.swportid=swportvlan.swportid AND (trunk=false OR trunk IS NULL)) LEFT JOIN vlan using(vlanid) LEFT JOIN swport AS s2 ON (s1.to_swportid=s2.swportid) LEFT JOIN module AS m2 ON (s2.moduleid=m2.moduleid) WHERE s1.trunk = 1 AND b1.catid = 'SW' ORDER BY b1.sysname,module,port LIMIT 100 OFFSET 0 I sent earlier an email about another error I got on another report tool, when sorting on IP-address on servers. I have not received any hints to what could be the problem there. httpd 2.0.52 jakarta-tomcat 5.0.28 java j2sdk1.4.2_08 perl 5.8.5 php 4.3.9 postgresql 7.4.8 python 2.3.4, mod_python 3.1.3 Regards, Roger -- Roger Aas Stord/Haugesund College

1 0

[Nav-users] Alertengine email sender machine name != real machine name
by roger.aas＠hsh.no 29 Sep '05

29 Sep '05

I get this email from Alertengine: > X-Auth-No: > Return-Path: <navcron(a)nav3.hsh.no> > Received: from sentinel.hsh.no not authenticated [158.37.208.20] > by posthus.hsh.no with NetMail SMTP Agent $Revision: 3.22.1.16 $ on Novell NetWare; > Thu, 29 Sep 2005 10:41:26 +0200 > Received: from artifact.hsh.no ([158.37.35.10]) > by sentinel.hsh.no (SMSSMTP 4.1.7.33) with SMTP id M2005092910483300240 > for <roger(a)posthus.hsh.no>; Thu, 29 Sep 2005 10:48:33 +0200 > Received: from sentinel.hsh.no (sentinel.hsh.no [158.37.208.20]) > by artifact.hsh.no (8.9.3 (PHNE_28760)/8.9.3) with SMTP id KAA07954 > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:33 +0200 (METDST) > Received: from nav3.hsh.no ([158.37.208.25]) > by sentinel.hsh.no (SMSSMTP 4.1.7.33) with SMTP id M2005092910483200238 > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:32 +0200 > Received: from nav3.hsh.no (nav3.hsh.no [127.0.0.1]) > by nav3.hsh.no (8.13.1/8.13.1) with ESMTP id j8T8mWdi008206 > for <roger.aas(a)hsh.no>; Thu, 29 Sep 2005 10:48:32 +0200 > Received: (from navcron@localhost) > by nav3.hsh.no (8.13.1/8.13.1/Submit) id j8T8mWdW008203; > Thu, 29 Sep 2005 10:48:32 +0200 > Date: Thu, 29 Sep 2005 10:48:32 +0200 > Message-Id: <200509290848.j8T8mWdW008203(a)nav3.hsh.no> > From: alertengine(a)nav.hsh.no > To: roger.aas(a)hsh.no > Subject: Box haugesund-auditoriume-ap.hsh.no is up > > This is an automatically generated message from NAV: > > Box haugesund-auditoriume-ap.hsh.no (158.37.35.132) is up since 2005-09-29 10:48:09. As you can see it is only the "From:" header line that says "nav.hsh.no", the rest of the headers give the correct name for the server "nav3.hsh.no". Anyone know where this is happening? Some config I have missed? Or a small bug lurking somewhere? Or is it just a cosmetic thing since you are not supposed to answer such an email? Since I have called the NAV 2.1.5 server for nav.hsh.no it gave me a small moment of confusion... :-) - Roger -- Roger Aas Stord/Haugesund College

1 0

Error in report tool sorting on server ip
by roger.aas＠hsh.no 28 Sep '05

28 Sep '05

Nav version 3.0.0 "Toolbox -> Report -> Servers -> (Sort on) IP" gives me this error: Servers Configuration error! The report generator is not able to do such things. ERROR: column "netbox.ip" must appear in the GROUP BY clause or be used in an aggregate function SELECT roomid,sysname,host(ip),catid,orgid,count(distinct category) as subcats,count(serviceid) as services,val as function,netbox.netboxid,prefixid FROM netbox LEFT JOIN service USING (netboxid) LEFT JOIN netboxcategory USING (netboxid) LEFT JOIN netboxinfo ON (netboxinfo.netboxid=netbox.netboxid AND netboxinfo.var='function') WHERE catid='SRV' GROUP BY roomid,sysname,host(ip),catid,orgid,val,netbox.netboxid,prefixid ORDER BY ip,roomid LIMIT 100 OFFSET 0 This does not happen with the other categories like routers, core switches and wireless that I have in NAV now. - Roger -- Roger Aas Stord/Haugesund College

1 0

Upgrade guide?
by jsidwell＠perisys.net 19 Sep '05

19 Sep '05

Is there any documentation for upgrading from the beta to the 3.0 gold? Joshua Sidwell, CISSP 6021 S. Syracuse Way Suite 216 Greenwood Village, CO 80111 720-246-8953 office 720-222-0552 fax (303) 668 -3291 (Mobile) This email and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and may contain confidential and/or proprietary material. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Perimeter Systems, Inc. Finally, the recipient should check this email and any attachments for the presence of viruses. Perimeter Systems, Inc. accepts no liability for any damage caused by any virus transmitted by this email.

1 0

Bugs?
by a.l.prois＠usit.uio.no 16 Sep '05

16 Sep '05

On Fri, 2 Sep 2005, Morten Vold wrote: > On 29/08/2005 13:11, Asbj?rn Pr?is uttered: > >> 4) LDAP auth >> I'm trying to get authentication through LDAP to work. Login fails >> with error message "unable to make contact with the DLAP server". >> Logs on the LDAP server doest show anything (seems like the NAV box >> doesnt make any contact at all), and since I'm no python coder I >> havent been able to reverse-engeneer the code to figure things out. >> Are there any documentation on the LDAP auth part somewhere? > > I assume you've entered the correct LDAP configuration in > etc/webfront/webfront.conf, and that your LDAP server is in fact > reachable from your NAV server? Does your LDAP server run on a > non-standard port? > > In retrospect, it's also clear that the LDAP authentication should be > even more configurable, as the code makes a few assumptions about which > attributes to use when binding to the LDAP server and to retrieve from > the LDAP user objects. Hello again. I finally made it work. UIOs ldap server doesn't accept uncrypted connections when authenticating a user/password. So after alot of testing it worked when openldap knew where to find the correct certificate. One problem occured though. If a person is hidden in the ldap-tree, the login-page return this error : --- snip --- Mod_python error: "PythonHandler mod_python.publisher" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/lib/python2.3/site-packages/mod_python/publisher.py", line 136, in handler result = util.apply_fs_data(object, req.form, req=req) File "/usr/lib/python2.3/site-packages/mod_python/util.py", line 361, in apply_fs_data return object(**args) File "/usr/local/nav/apache/webroot/index.py", line 136, in login fullName = ldapAuth.getUserName(login) File "/usr/local/nav/lib/python/nav/web/ldapAuth.py", line 97, in getUserName record = res[0][1] --- /snip --- -Asbj?rn- >From morten.vold at ntnu.no Fri Sep 16 17:19:47 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Sep 16 16:19:54 2005 Subject: [Nav-users] Release-notice: NAV 3.0.0 :-)) Message-ID: <432AD483.40701(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0.0 is now finally available for download at http://metanav.ntnu.no/ :-) CHANGES ======= Version 3.0.0 (released 16 September 2005) Improvements: * Fixed a bug in maintengine which prevented it from doing it's job when the database was busy/overloaded. * Fixed a bug in the integration between Alert Profiles (PHP) and the Cheetah templating system (Python), which would cause the Alert Profiles web interface to act up. * Character coding information added to all NAV-original Python programs. * Fixed a bug which cleared a user's password if the account editing form of Useradmin was submitted without changes. * NetworkDiscovery now only checks for closed vlans on active ports. * Fixed a NullPointerException in getDeviceData. * Fixed various problems with Cisco module/submodule translation in getDeviceData. * Fixed a AlertEngine/getDeviceData combination bug which caused AlertEngine to log loads of long error messages on events that lacked an alerttype suggestion. * New option to have AlertEngine log error messages to a separate error log. * AlertEngine now sends error alerts if an alerttype has no configured subject line in alertmsg.conf. * Added report shortcut to search for strings in prefix-netident (added to the front.html config file) * Added link from Report to the previously hidden feature "service matrix" of the IP Device Center (added to the front.html config file) - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDKtSDXxIl0kpcOkQRAn97AJ4kWvitADAuV5vXe3lyv3Y7AK3GQwCggq3h 1DjytJjsgjwDVoxX/NtOu14= =0fKm -----END PGP SIGNATURE----- >From roger.aas at hsh.no Sun Sep 18 03:56:55 2005 From: roger.aas at hsh.no (Roger Aas) Date: Sun Sep 18 02:57:03 2005 Subject: [Nav-users] NAV installation guide for Red Hat Enterprise Linux 4 changed to 3.0.0 release version Message-ID: <432CBB57.7030900(a)hsh.no> I have edited the step-by-step installation guide for NAV on Red Hat Enterprise Linux 4 to cover the 3.0.0 release version. You can find it here: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 Please give me feedback when you find errors or omissions so I can fix them. Or if you just want to comment it... :-) I hope this can be of help for someone. Regards, Roger -- Roger Aas Stord/Haugesund College

1 0

error editing device
by Pete.Hoffswell＠davenport.edu 14 Sep '05

14 Sep '05

I am trying to change the room on a device, and get the following error. It looks like a sql insert, shouldn't it be a modify? http://nav.davenport.edu/editdb/netbox/edit/52 Mod_python error: "PythonHandler editdb"Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 463, in editPage outputForm,action) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 2479, in add function) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 590, in insertNetbox ('netboxid','netbox_netboxid_seq')) File "/usr/local/nav/apache/webroot/editdb/editdbSQL.py", line 152, in addEntryFields executeSQL(sqllist) File "/usr/local/nav/apache/webroot/editdb/editdbSQL.py", line 39, in executeSQL database.execute(sql)IntegrityError: ERROR: duplicate key violates unique constraint "netbox_sysname_key"INSERT INTO netbox (sysname,rw,catid,ip,netboxid,prefixid,orgid,deviceid,ro,roomid) VALUES ('bay-wan.network.davenport.edu','youwish','GW','10.200.1.65','60','290','Davenport','129','itsasecret','17 ITS Office') Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.eduDavenport University. It's working.

1 0

error adding devices
by Pete.Hoffswell＠davenport.edu 14 Sep '05

14 Sep '05

I get the following when adding a device: It seems intermittent. http://nav.davenport.edu/editdb/netbox/edit/ Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 463, in editPage outputForm,action) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 2435, in add disabled=True)) TypeError: __init__() takes at least 2 non-keyword arguments (1 given) Looks like a bug maybe? Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working.

1 0

AlertProfiles problem
by roger.aas＠hsh.no 13 Sep '05

13 Sep '05

Morten Vold wrote: > On 09/08/2005 10:31, Roger Aas uttered: > >> if VFFSL(SL,"user.preferences.hidelogo",1): >>NameMapper.NotFound: cannot find 'preferences' while searching for >>'user.preferences.hidelogo' >> >>Also in the lower left corner I get this message both with FireFox and IE: >> >>StyleSheets >>Your Internet browser do not support style sheets. We reccomend using a >>browser which support style sheets with Alert Profiles. >> > >>Someone know why I get this error? This is in RC2, I did not get this in >>RC1. > > > This bug was reported by Bulent Sarinc the same day RC2 came out. It was > fixed in the Subversion repository on July 27th (r3314). The fix will > be part of the next release. > > (Peder Magne Sefland also reported the same bug the day after you did). Hi Morten. Thanks for the answer. Using the subversion repository is not an option for me right now since I will only get the source there and will have to compile it, somethink I tried earlier with some beta version. There is just too much setup needed to get this to compile for me to have the time to make this work. So, I am instead hoping for the release version or maybe an RC3 version coming soon so I can start testing out the alert setup and the SMS alert system. Since I did not have the chance to attend the GigaCampus meeting in Trondheim this time I did not get any "inside information" to when to expect a new release of NAV. Anybody want to give me some hope? Regards, Roger -- Roger Aas Stord/Haugesund College

1 0

Tomcat Crash on network explorer(ConfigParser)
by Pete.Hoffswell＠davenport.edu 10 Sep '05

10 Sep '05

Thanks for the help, Kristian. Linking the files and restarting the tomcat server fixed. This step is missing in the InstallingOnSLES, so I went ahead and added it as follows: http://metanav.ntnu.no/moin.cgi/InstallingOnSLES#configuring-tomcat-and-the… Next, symlink the .jar files as well: cd /usr/share/tomcat/shared/lib ln -s /usr/local/nav/lib/java/*.jar . You might want to check my work. ;-) Cheers, and thanks agian. Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working. >>> Kristian Eide <kreide(a)gmail.com> 9/9/2005 3:19 PM >>> > java.lang.NoClassDefFoundError: no/ntnu/nav/ConfigParser/ConfigParser > Config error on my side somewhere perhaps? You need to copy or symlink the NAV jar files into the shared/lib tomcat directory. -- Kristian _______________________________________________ Nav-users mailing list Nav-users(a)itea.ntnu.no http://mailman.itea.ntnu.no/mailman/listinfo/nav-users

1 0

Tomcat Crash on network explorer(ConfigParser)
by Pete.Hoffswell＠davenport.edu 09 Sep '05

09 Sep '05

Hello! upon accessing http://nav.davenport.edu/navAdmin/servlet/navAdmin?section=ni&func=visTopol… I get a server 500 error, tomcat crashes on description The server encountered an internal error () that prevented it from fulfilling this request. exception javax.servlet.ServletException: Servlet execution threw an exception root cause java.lang.NoClassDefFoundError: no/ntnu/nav/ConfigParser/ConfigParser navAdmin.service(navAdmin.java:38) javax.servlet.http.HttpServlet.service(HttpServlet.java:856) Log says this: 2005-09-09 14:33:29 StandardWrapperValve[NetworkExplorer]: Servlet.service() for servlet NetworkExplorer threw exception java.lang.NoClassDefFoundError: no/ntnu/nav/ConfigParser/ConfigParser at navAdmin.service(navAdmin.java:38) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:284) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:204) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:257) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:567) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:245) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:199) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:567) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:184) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:164) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:149) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:567) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:156) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:567) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:972) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:206) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:833) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:732) at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:619) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:688) at java.lang.Thread.run(Thread.java:534) Config error on my side somewhere perhaps? Thanks! Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working.

2 1

Suse 9.1 apache/conf.d/nav.conf ?
by morten.vold＠ntnu.no 09 Sep '05

09 Sep '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 09/09/2005 14:45, Pete Hoffswell uttered: > Anyone have an idea on how to configure apache2 to run nav off a > directory, and not as a virtual server? I'm sorry, but that won't work, even if you do configure Apache that way. NAV 3 itself doesn't support running off anything but the (virtual) server root. The reason you are redirected when you browse http://myserver.com/nav is that NAV screens every request to the (virtual) server to perform access control based on the privileges that have been granted in the NAV Useradmin panel. The privilege configuration that comes with a fresh NAV installation doesn't grant anyone access to the URL "/nav", so you are redirected to the login screen. In your case, the login screen isn't even where NAV thinks it should be, since you placed NAV under /nav/ instead of /. Of course, NAV could surely be fixed to support this way of serving it, by introducing a global configuration option for a URL prefix, but the changes would probably need to be all over the place. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDIY8GXxIl0kpcOkQRAqP+AKCYixHrq10yHc7KjJx0CSZXke2FvACg0AEH E9+qO6IPoSds2ySk9uFzXcY= =ripK -----END PGP SIGNATURE----- >From Pete.Hoffswell at davenport.edu Fri Sep 9 12:48:31 2005 From: Pete.Hoffswell at davenport.edu (Pete Hoffswell) Date: Fri Sep 9 17:49:30 2005 Subject: [Nav-users] Suse 9.1 apache/conf.d/nav.conf ? Message-ID: <s32176bd.007(a)dugwia1.davenport.edu> Thanks, Morten - I got things running by configuring my server to use virtual servers, and using the following config file. This might help other users, so here you are: Suse 9.1 Apache2 virtual server config file for nav: networker2:~ # cat /etc/apache2/vhosts.d/nav.conf # NAV instance <VirtualHost *:80> DocumentRoot /usr/local/nav/apache/webroot ServerName nav.davenport.edu ServerAdmin pete.hoffswell(a)davenport.edu <Directory "/usr/local/nav/apache/webroot"> Options None AllowOverride None Order allow,deny Allow from all </Directory> <IfDefine SSL> SSLEngine off </IfDefine> ServerAdmin pete.hoffswell(a)davenport.edu ServerName nav.davenport.edu UseCanonicalName Off DocumentRoot "/usr/local/nav/apache/webroot" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/usr/local/nav/apache/webroot"> Options Indexes FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> DirectoryIndex index.html index.html.var index.php index.cgi AccessFileName .htaccess AddEncoding x-compress Z AddEncoding x-gzip gz tgz AddLanguage en .en AddLanguage no .no LanguagePriority en no ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddCharset ISO-8859-1 .iso8859-1 .latin1 AddCharset WINDOWS-1251 .cp-1251 .win-1251 AddCharset CP866 .cp866 AddCharset UTF-8 .utf8 AddCharset utf-8 .utf8 AddType application/x-tar .tgz AddHandler cgi-script .cgi AddHandler imap-file map AddHandler type-map var AddOutputFilter INCLUDES .shtml # Unless mod_php was compiled with Apache 2 filter support, this is # the way to associate php files with mod_php: AddType application/x-httpd-php .php # # The following directives modify normal HTTP response behavior to # handle known problems with browser implementations. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # The following directive disables redirects on non-GET requests for # a directory that does not include the trailing slash. This fixes a # problem with Microsoft WebFolders which does not appropriately handle # redirects for folders with DAV methods. # BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully #LoadModule python_module modules/mod_python.so #LoadModule php4_module modules/libphp4.so </VirtualHost> networker2:~ # Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working. >>> Morten Vold <morten.vold(a)ntnu.no> 9/9/2005 9:32 AM >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 09/09/2005 14:45, Pete Hoffswell uttered: > Anyone have an idea on how to configure apache2 to run nav off a > directory, and not as a virtual server? I'm sorry, but that won't work, even if you do configure Apache that way. NAV 3 itself doesn't support running off anything but the (virtual) server root. The reason you are redirected when you browse http://myserver.com/nav is that NAV screens every request to the (virtual) server to perform access control based on the privileges that have been granted in the NAV Useradmin panel. The privilege configuration that comes with a fresh NAV installation doesn't grant anyone access to the URL "/nav", so you are redirected to the login screen. In your case, the login screen isn't even where NAV thinks it should be, since you placed NAV under /nav/ instead of /. Of course, NAV could surely be fixed to support this way of serving it, by introducing a global configuration option for a URL prefix, but the changes would probably need to be all over the place. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDIY8GXxIl0kpcOkQRAqP+AKCYixHrq10yHc7KjJx0CSZXke2FvACg0AEH E9+qO6IPoSds2ySk9uFzXcY= =ripK -----END PGP SIGNATURE-----

1 0

Suse 9.1 apache/conf.d/nav.conf ?
by magnus＠ntnu.no 09 Sep '05

09 Sep '05

Pete Hoffswell: > Does anyone have an example apache config snippet for nav? http://svn.nav.ntnu.no/nav/navme/trunk/doc/apache/httpd2.conf.example is no longer available Sorry about that. Try http://svn.itea.ntnu.no/repos/nav/navme/trunk/doc/apache/httpd2.conf.example We moved our svn repository some weeks ago. I have updated the link at metanav.ntnu.no now. HTH -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc >From Pete.Hoffswell at davenport.edu Fri Sep 9 09:45:18 2005 From: Pete.Hoffswell at davenport.edu (Pete Hoffswell) Date: Fri Sep 9 14:46:19 2005 Subject: [Nav-users] Suse 9.1 apache/conf.d/nav.conf ? Message-ID: <s3214bcf.015(a)dugwia1.davenport.edu> I manage my SuSE apache2 implementation through the /etc/apache2/conf.d directory. This is a standard httpd.conf include directory in the SuSE file layout. Unfortunately, I do not use a virutal server setup, so I don't get a direct correlation to what is seen in http://svn.itea.ntnu.no/repos/nav/navme/trunk/doc/apache/httpd2.conf.example I would like to configure my Apache2 server to run NAV off a directory, and not as a virutal server. Sorry, I'm not a apache wizard! Currently, a call to http://myserver.com/nav seems to redirect to http://myserver.com/index/login?origin=/nav I seem to be missing a rewrite rule or something. I don't see it in httpd2.conf.example, and suspect it has somethign to do with the document root that is provided by a virtual server, maybe? Anyone have an idea on how to configure apache2 to run nav off a directory, and not as a virtual server? Thanks! Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working. >>> Magnus Nordseth <magnus(a)ntnu.no> 9/8/2005 5:00 PM >>> Pete Hoffswell: > Does anyone have an example apache config snippet for nav? http://svn.nav.ntnu.no/nav/navme/trunk/doc/apache/httpd2.conf.example is no longer available Sorry about that. Try http://svn.itea.ntnu.no/repos/nav/navme/trunk/doc/apache/httpd2.conf.example We moved our svn repository some weeks ago. I have updated the link at metanav.ntnu.no now. HTH -- Magnus Nordseth echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc

1 0

NAV 3 RC2 - cannot import name v1
by morten.vold＠ntnu.no 01 Sep '05

01 Sep '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 05/08/2005 16:24, Carlton Houston uttered: > When I go to the edit database toolbox, I get the following error > output. Can anyone tell me what this means? [...] > File "/usr/local/nav/lib/python/nav/Snmp.py", line 23, in ? > from pysnmp.proto import v1, v2c > > ImportError: cannot import name v1 I think your problem might be the same as Matt Hall's. As Roar Pettersen suggested to him, EditDB is unfortunately very picky about the version of the pysnmp library. It requires pysnmp-3.3.5. The 3.3 line of pysnmp had a very unstable API, unfortunately noone discovered this when EditDB was developed using version 3.3.5. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFsanXxIl0kpcOkQRAqrVAJ468d0elUPV5q+bbTPStlZLTXozTQCdEH2H /Poxxbvuv0AnOlmAg6y0qXg= =JI4X -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Thu Sep 1 14:11:01 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Thu Sep 1 13:12:13 2005 Subject: [Nav-users] AlertProfiles problem In-Reply-To: <42F869E6.8090506(a)hsh.no> References: <42F869E6.8090506(a)hsh.no> Message-ID: <4316E1C5.9060007(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 09/08/2005 10:31, Roger Aas uttered: > if VFFSL(SL,"user.preferences.hidelogo",1): > NameMapper.NotFound: cannot find 'preferences' while searching for > 'user.preferences.hidelogo' > > Also in the lower left corner I get this message both with FireFox and IE: > > StyleSheets > Your Internet browser do not support style sheets. We reccomend using a > browser which support style sheets with Alert Profiles. > > Someone know why I get this error? This is in RC2, I did not get this in > RC1. This bug was reported by Bulent Sarinc the same day RC2 came out. It was fixed in the Subversion repository on July 27th (r3314). The fix will be part of the next release. (Peder Magne Sefland also reported the same bug the day after you did). - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFuHFXxIl0kpcOkQRAmeIAJ4jG+guLSNzs2bvwo1LYqwS/ov0swCfVUX5 K7YE8SjDeVVF5IVjYDOc5S4= =w3T1 -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Thu Sep 1 14:25:41 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Thu Sep 1 13:26:05 2005 Subject: [Nav-users] - ImportError: cannot import name Account In-Reply-To: <s300784e.030(a)pop.davenport.edu> References: <s300784e.030(a)pop.davenport.edu> Message-ID: <4316E535.3020607(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 15/08/2005 17:10, Pete Hoffswell uttered: >>>>from nav.db.navprofiles import Account > > Traceback (most recent call last): > File "<stdin>", line 1, in ? > ImportError: cannot import name Account Eek.. strangeness. Right now it looks like Python doesn't find the NAV libraries (but I could be wrong). What's the output of this Python script (entered at the interactive Python prompt)? import sys print sys.path import nav import nav.db.navprofiles Did you set your PYTHONPATH variable, or did you symlink the NAV Python libraries to Python's systemwide library directories? > Aditya Rajgarhia <arajgarh(a)iwu.edu> did mention software versions. > Do you have any suggestions as to which packages I should maybe look > at? I'm not sure what you're getting at here. I don't think your problem is in any way related to the version numbers of any of your software. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFuU1XxIl0kpcOkQRAjE9AKDmCJe84eJ5zkLu6SG7oJ/5UuiQmACfZvxq lPyoby/d4XxEgELK9R1tbvg= =m9Ql -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Thu Sep 1 14:35:39 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Thu Sep 1 13:35:44 2005 Subject: [Nav-users] vlanPlot - Looks very messy In-Reply-To: <b4c110fd0508191045305d5f0e(a)mail.gmail.com> References: <4304B180.7060603(a)iwu.edu> <b4c110fd05081810484e86ccf(a)mail.gmail.com> <4304D2A8.2000303(a)iwu.edu> <b4c110fd050818161060ade9d(a)mail.gmail.com> <4305EDA4.10101(a)iwu.edu> <b4c110fd0508191045305d5f0e(a)mail.gmail.com> Message-ID: <4316E78B.30204(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 19/08/2005 19:45, Kristian Eide uttered: > After entering the above SQL statement you should be able to log in as > user 'admin' with password 'XXX' (given that the user admin already > exists). Actually, NAV supports plaintext passwords in the database (for "legacy" reasons), as long as the password doesn't begin with the string "md5". So UPDATE account SET password='XXX' WHERE login='admin'; should be good enough :) > I will refer you to Morten Vold who is our expert on this part of > NAV. He is on vacation until the end of the month, however. When it comes to the actual problem Aditya reports (submitting unchanged user details clears the password), I can confirm that this is a bug, which must have been reintroduced into the system (I don't know when). This was a bug maybe two years ago, and I fixed it then. I'll be getting a new fix into the next release. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFueLXxIl0kpcOkQRAn1+AJ431HKLOCpdSkQvadF+pGFf1zAIKQCgq4F8 X2pva/1Ydr4DNXxgjMWtjuA= =/70V -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Thu Sep 1 14:51:30 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Thu Sep 1 13:51:36 2005 Subject: [Nav-users] Partitioning user logons so they only see their devices? In-Reply-To: <20050819165523.3E5C7336D4(a)signal.itea.ntnu.no> References: <20050819165523.3E5C7336D4(a)signal.itea.ntnu.no> Message-ID: <4316EB42.3090104(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 19/08/2005 18:55, Joshua Sidwell uttered: > I am currently trying to create unique user logons to allow read only > access to those devices that individual departments are responsible > for monitoring. My problem is that I am not sufficiently clear on how > to go about doing this. It seems that you should be able to do this > in the "Privileges" section on the group creation page. Is this > correct? If not, is there some other way to limit users ability to > see all devices? Unfortunately, this feature does not exist at this time. This is, however, scheduled for version 3.1, in the currently running development project funded by Uninett. It was always the plan to have the privilege system be this flexible, but we never had the time to implement it fully. The only way to limit users' access to information in the current version of NAV is to make use of the web_access privilege to grant access to URL patterns. The example groups that come with a NAV installation will have some web_access privileges set to demonstrate their usage. Already, you can enter a hierarchical organization structure of department names (preferably using abbreviations) in EditDB, and user accounts can be made members of these departments. The department/orgid that "owns" a piece of network equipment will be derived from the information that NAV collects from the equipment. The idea is that improvements to the privilege system will allow administrators to use the accounts' organizational memberships to limit users' access to information. An account that is a member of the "svt" department might only be allowed to see the status of equipment owned by the "svt" department, or use the machine tracker to track only computers on the subnets that have been delegated to the "svt" department. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFutCXxIl0kpcOkQRAqw8AJ90MXrYsmj9K4Osbx3bOn+k1EQajQCggdPY b0O2RpGfCvnf/BjIdkpTvZA= =EMgc -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Thu Sep 1 14:55:21 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Thu Sep 1 13:55:27 2005 Subject: [Nav-users] add type - what is this? In-Reply-To: <20050823202536.E64049(a)duke.cc.uit.no> References: <E04174B5A513E542AD2CB6C1E18D9C7D4DD5AC(a)Exchange.admin.khio.no> <20050823202536.E64049(a)duke.cc.uit.no> Message-ID: <4316EC29.2020702(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 23/08/2005 20:27, Borge Brunes uttered: >> How do i know what types there are? > http://metanav.ntnu.no/moin.cgi/EquipmentTypes Or, if you wish to see the types that have been registered in your own NAV installation, go to: http://nav.admin.khio.no/editdb/type/list - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFuwpXxIl0kpcOkQRAi/tAJ4tRJnyEQ4Qjqm/nxkvJLYF9NlSegCeMsMD jMVUmnEtzV9LVFSwv5abzyw= =h29W -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Fri Sep 2 14:40:13 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Sep 2 13:40:20 2005 Subject: [Nav-users] Bugs? In-Reply-To: <Pine.SOL.4.63-L.0508291254150.26636(a)saruman.uio.no> References: <Pine.SOL.4.63-L.0508291254150.26636(a)saruman.uio.no> Message-ID: <43183A1D.608(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 29/08/2005 13:11, Asbj?rn Pr?is uttered: > 4) LDAP auth > I'm trying to get authentication through LDAP to work. Login fails > with error message "unable to make contact with the DLAP server". > Logs on the LDAP server doest show anything (seems like the NAV box > doesnt make any contact at all), and since I'm no python coder I > havent been able to reverse-engeneer the code to figure things out. > Are there any documentation on the LDAP auth part somewhere? I assume you've entered the correct LDAP configuration in etc/webfront/webfront.conf, and that your LDAP server is in fact reachable from your NAV server? Does your LDAP server run on a non-standard port? In retrospect, it's also clear that the LDAP authentication should be even more configurable, as the code makes a few assumptions about which attributes to use when binding to the LDAP server and to retrieve from the LDAP user objects. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDGDodXxIl0kpcOkQRAhWzAKDHJseVoFA/lvh4y+9H9LFusEbTPwCgrV69 JbRhxS0M43KSuA27rl2zwH0= =KSS/ -----END PGP SIGNATURE----- >From morten.vold at ntnu.no Fri Sep 2 14:44:30 2005 From: morten.vold at ntnu.no (Morten Vold) Date: Fri Sep 2 13:44:38 2005 Subject: [Nav-users] Bugs? In-Reply-To: <43183A1D.608(a)ntnu.no> References: <Pine.SOL.4.63-L.0508291254150.26636(a)saruman.uio.no> <43183A1D.608(a)ntnu.no> Message-ID: <43183B1E.8050908(a)ntnu.no> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 02/09/2005 13:40, Morten Vold uttered: > I assume you've entered the correct LDAP configuration in > etc/webfront/webfront.conf, and that your LDAP server is in fact > reachable from your NAV server? Does your LDAP server run on a > non-standard port? Just remembered: Also, check your Apache error log, as NAV may spit out more detailed error information there. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDGDseXxIl0kpcOkQRAkHGAKDGa19KjvOdWwc6oI9ecPP0gFCWzACg6t2m DArVtL29Kp6Z+CaWVGB1/+A= =TBOK -----END PGP SIGNATURE----- >From Pete.Hoffswell at davenport.edu Thu Sep 8 16:38:38 2005 From: Pete.Hoffswell at davenport.edu (Pete Hoffswell) Date: Thu Sep 8 21:39:11 2005 Subject: [Nav-users] Suse 9.1 apache/conf.d/nav.conf ? Message-ID: <s3205b13.025(a)dugwia1.davenport.edu> Hello? I'm working on a new installation to SuSE 9.1, following the InstallingOnSLES recipe. Does anyone have an example apache config snippet for nav? http://svn.nav.ntnu.no/nav/navme/trunk/doc/apache/httpd2.conf.example is no longer available On SuSE,this would install to /etc/apache/conf.d/nav.conf I have tried to make one, but I think it's wrong. Right now a visit to mysever.com/nav looks to redirect to http://myserver.com/index/login?origin=/nav and a 404 error. Thanks! Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working.

1 0

Syslog setup
by jsidwell＠perisys.net 31 Aug '05

31 Aug '05

I am currently trying to setup the syslog functionality in NAV v3 Beta, and have edited the logger.conf to select specific devices and escalate their errors/warnings. I have also changed where the log file is expected to be so that NAV can find the syslog messages from the device, but I am still not getting any data even though I see info getting dumped into the log. I have looked for documentation on this feature set, but I am unable to find anything. Can anybody point me in the right direction for this?

1 0

Bugs?
by stian.soiland＠ntnu.no 31 Aug '05

31 Aug '05

On 29. aug. 2005, at 12:11, Asbj?rn Pr?is wrote: > 1) service ftp on a ip-device (SRV) > servicemon.log says : > abstractChecker.py:__init__:104 [Info] New checker instance for x:http > abstractChecker.py:__init__:104 [Info] New checker instance for > x:https > abstractChecker.py:__init__:104 [Info] New checker instance for x:ssh > abstractChecker.py:__init__:104 [Info] New checker instance for y:ssh > db.py:getCheckers:225 [Critical] no such checker: ftp > Unfortunaly the FTP checker has not been tested in a long time. Try this patch to FtpChecker.py: : stain@isbre ~/navme/subsystem/statemon/nav/statemon/checker;svn diff Index: FtpChecker.py =================================================================== --- FtpChecker.py (revision 3231) +++ FtpChecker.py (working copy) @@ -22,8 +22,10 @@ # Authors: Magnus Nordseth <magnun(a)itea.ntnu.no> # -from nav.statemon.abstractChecker import AbstractChecker, Event -import ftplib, Socket +from nav.statemon.abstractChecker import AbstractChecker +from nav.statemon.event import Event +from nav.statemon import Socket +import ftplib class FTP(ftplib.FTP): def __init__(self,timeout,host='',user='',passwd='',acct=''): ftplib.FTP.__init__(self) Please report back if this works as I unfortunately don't have time to check this now.. I think this bug also effects PostgresqlChecker and DummyChecker as they also try to import Event from abstractChecker.py instead of event.py -- Stian S?iland People who enjoy meetings should not Birmingham, UK be in charge of anything. [Sowell] http://soiland.no/ =/\=

1 0

add type - what is this?
by BuleSari＠khio.no 23 Aug '05

23 Aug '05

Hi, I got this when I tried to add new router to the database. Got SNMP response, but can't find type in database. You must add the type <http://nav.admin.khio.no/editdb/type/edit/?sysobjectid=1.3.6.1.4.1.9.1. 50> before proceeding (a new window will open, when the new type is added, press Continue to proceed Add type Typename * Description * Vendor * Sysobjectid * 3com alcatel allied avaya breezecom cisco dlink hp symbol cdp tftp frequency ________________________________ How do i know what types there are? Mvh Bulent Sarinc khio

1 0

SV: [Nav-users] Some problems after upgrade
by Jan.Susegg＠hint.no 23 Aug '05

23 Aug '05

In the GetDeviceData.log file I get a lot of the following messages from all my switches in NAV: getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: I used snmpwalk to test snmp connectivity and it works fine. What might the problem be? In the eventEngine-stderr.log I get this error message. What might the problem be? SQLException for update statement: INSERT INTO alertq (alertqid,source,deviceid,netboxid,time,eventtypeid,alerttypeid,state,va lue,severity) VALUES ('8012','getDeviceData','54','21','2005-08-23 10:03:49','info',(SELECT alerttypeid FROM alerttype WHERE eventtypeid='info' AND alerttype='dnsMismatch'),'x','0','0') java.sql.SQLException: ERROR: More than one tuple returned by a subselect used as an expression. PS! I use NAV RC2

1 0

[Nav-users] Python RegEx for segmenting user access to unique devices?
by jsidwell＠perisys.net 22 Aug '05

22 Aug '05

Hello again, I am currently trying to create unique user logons to allow read only access to those devices that individual departments are responsible for monitoring. My problem is that I am not sufficiently clear on how to go about doing this. It seems that you should be able to do this in the "Privileges" section on the group creation page. Is this correct? If not, is there some other way to limit users ability to see all devices? Thank you in advance for any/all help. If possible, could somebody please send an example pytho regex for creating a demo group that can only see objects in the "demo" container?

1 0

SW vs GSW
by bertove＠gmail.com 19 Aug '05

19 Aug '05

Hello, Could someone explain to me how NAV interprets SW and GSW categories. It is not making sense to me. For example, a Cisco Catalyst 6513 has three cards: 1 for switching and 3 for MSFC routing. So I suppose that the first one should be set to SW and the MSFCs to GW. Then, the Catalyst 4006 switches that we use, NAV did not get data when I entered them as SW. It gets all the data when I change them to GSW. However, these 4006 are only doing switching on layer 2. SImilarly for Catalyst 3500 series switches. I could not find anything in the NAV wiki, any information will be appreciated. Thanks!

2 1

vlanPlot - Looks very messy
by kreide＠gmail.com 19 Aug '05

19 Aug '05

> I am in fact logged in as admin in the screenshots, but as you can see > the buttons are not there. I tried again after logging out, same result. > What could it be? I've just looked at the code, and what should happen is that if you are logged in as a valid NAV user the buttons should appear. We have occasionally had some problems with this, however, which could be due to the version of Apache/Tomcat in use as well as the Java VM. I see that you are using Linux; have you tried this on Windows? > Also, I have another little problem which you may want to fix; I went to > the user admin to check if 'admin' has all the privileges. Then I > clicked on "Submit Changes" without providing a new password. But now > the old password does not work!! Leaving the password blank doesn't work > either. It's like being locked out. Can you tell me the database command > to reset the password? This seems like an unfortunate oversight. and should be fixed. Morten? In the mean time you could connect to the navprofiles database and try something like this: UPDATE account SET password='md5'||md5('password') WHERE login='login' Also, please CC the nav-users list when you reply (unless you are including sensitive info you don't want archived). -- Kristian

2 1

[Nav-users]
by kreide＠gmail.com 19 Aug '05

19 Aug '05

> Here is the SNMPwalk output for the OID: And what ports do you get listed if you go to the swport report? And what is the output from snmpwalk of 1.3.6.1.2.1.2.2.1.5? There might be an issue of some ports being listed, but the OID for the octet counts not existing, which confuses Cricket. -- Kristian

1 0

NAV 3 RC2 Foundry Switch Support
by kreide＠gmail.com 19 Aug '05

19 Aug '05

> no. Circket only shows a few switch ports, and none of them are > Foundry. Perhaps I could come up with a decent plan with the It seems that Cricket is also missing some info. Hopefully our Circket guy can explain what when he returns from vacation. > developing NAV would find that kind of thing useful, but if this > worked properly for Foundry as well as Cisco gear, it would mean a > great deal to us. I certainly can't promise anything myself, but most Full support for Foundry would involve finding the right OIDs for collecting info about duplex / vlan / trunk status for the ports. It would then be easy to add such support. Even without this we should be able to get Cricket to collect info though. -- Kristian

1 0

[Nav-users]
by kreide＠gmail.com 18 Aug '05

18 Aug '05

> to get some graphs to display. In particular this seems to be related to > the second issue that we are having regarding the OID's that are used to > poll data from on of our routers. The error message that I am receiving > from navcron is: > [18-Aug-2005 10:15:02*] Received SNMP response with error code noSuchName. > OID: 1.3.6.1.2.1.2.2.1.10.4 If you go to the snmpoid report, can you provide the list of OIDs NAV thinks the device supports? /report/netboxsnmpoid?sysname=<sysname> What happens if you try snmpwalk on the above OID? -- Kristian

1 0

vlanPlot - Looks very messy
by arajgarh＠iwu.edu 18 Aug '05

18 Aug '05

Hi, I have entered a few routers and switches for testing. The vlanPlot gets all the links between them, but the view (http://www.iwu.edu/~acm/nav/vlanplot1.png) is rather ugly as compared to what you people have in the wiki (http://metanav.ntnu.no/moin.cgi/NAVScreenShots). I know that a lot of software allow you to drag devices in the traffic map to get a nicer view. Is that possible in NAV or is there some other way to get a view like you have in the wiki? Secondly, as you can see in the above screenshot and in this (http://www.iwu.edu/~acm/nav/vlanplot2.png), the devices are labelled by their ip address. Is it possible to display their SNMP Names instead of the IP address, since with many devices it will be difficult to keep track of the IPs. Ofcourse, one solution would be to assign DNS to the devices but I was wondering if the SNMP names are possible (perhaps by some simple change to the applet code?). Thanks, Aditya Rajgarhia Illinois Wesleyan University >From jsidwell at perisys.net Thu Aug 18 11:48:42 2005 From: jsidwell at perisys.net (Joshua Sidwell) Date: Thu Aug 18 18:49:12 2005 Subject: [Nav-users] Message-ID: <20050818164910.3ECB27FFA(a)fri.itea.ntnu.no> Hello all, I am currenlty having two separate issues with our NAV implementation. The first is that some graphics being generated by Cricket v1.0.5 are not being read back from /tmp. The permissions appear to be correct since we are able to get some graphs to display. In particular this seems to be related to the second issue that we are having regarding the OID's that are used to poll data from on of our routers. The error message that I am receiving from navcron is: Error and the lines leading up to it: [18-Aug-2005 10:15:01 ] Retrieved data for XXX.XXX.4.30 (): 1,2,100037660,5012816,232131840 [18-Aug-2005 10:15:01 ] Creating datafile /usr/local/nav/cricket/cricket-config/../cricket-data//routers/XXX.XXX.6.30. rrd for target name XXX.XXX.6.30. [18-Aug-2005 10:15:02 ] Retrieved data for XXX.XXX.6.30 (): 27,26,0,1292316,229179552 [18-Aug-2005 10:15:02 ] Retrieved data for 0_1 (2): 0,0,0,0,0,0 [18-Aug-2005 10:15:02*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.4 Error and the lines leading up to it: [18-Aug-2005 10:15:02 ] Retrieved data for XXX.XXX.6.30 (): 27,26,0,1292316,229179552 [18-Aug-2005 10:15:02 ] Retrieved data for 0_1 (2): 0,0,0,0,0,0 [18-Aug-2005 10:15:02*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.4 [18-Aug-2005 10:15:02 ] Walking ifIndex for XXX.XXX.1.251:161 to resolve interface-index mapping [18-Aug-2005 10:15:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.4 Error and the lines leading up to it: [18-Aug-2005 10:15:05 ] Retrieved data for 1_0 (4): U,U,U,U,U,U [18-Aug-2005 10:15:05 ] Some data is missing for 1_0 (4). [18-Aug-2005 10:15:05 ] Retrieved data for 1_0 (4): U,U,U,U,U,U [18-Aug-2005 10:15:05 ] Some data is missing for 1_0 (4). [18-Aug-2005 10:15:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.5 [18-Aug-2005 10:15:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.5 Error and the lines leading up to it: [18-Aug-2005 10:15:05 ] Retrieved data for 1_1 (5): U,U,U,U,U,U [18-Aug-2005 10:15:05 ] Some data is missing for 1_1 (5). [18-Aug-2005 10:15:05 ] Retrieved data for 1_1 (5): U,U,U,U,U,U [18-Aug-2005 10:15:05 ] Some data is missing for 1_1 (5). [18-Aug-2005 10:15:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.6 [18-Aug-2005 10:15:06*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.6 Error and the lines leading up to it: [18-Aug-2005 10:15:06 ] Retrieved data for 1_2 (6): U,U,U,U,U,U [18-Aug-2005 10:15:06 ] Some data is missing for 1_2 (6). [18-Aug-2005 10:15:06 ] Retrieved data for 1_2 (6): U,U,U,U,U,U [18-Aug-2005 10:15:06 ] Some data is missing for 1_2 (6). [18-Aug-2005 10:15:06*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.7 [18-Aug-2005 10:15:06*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.2.1.2.2.1.10.7 I have looked on the WiKi, and not been able to locate any information on either of these issues. Any help would be greatly appreciated (including a link to a page I have missed..) The actual device is a Cisco 7204VXR. Joshua Sidwell, CISSP Perimeter Systems, Inc. Network Security Engineer (303) 552 - 5434 http://www.perisys.net <a href="http://www.spreadfirefox.com/?q=affiliates <http://www.spreadfirefox.com/?q=affiliates&id=0&t=1> &id=0&t=1">Get Firefox!</a> This email and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and may contain confidential and/or proprietary material. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Brainstorm-Newtorks. Finally, the recipient should check this email and any attachments for the presence of viruses. Brainstorm-Newtorks. accepts no liability for any damage caused by any virus transmitted by this email. Joshua Sidwell, CISSP Perimeter Systems, Inc. Network Security Engineer (303) 552 - 5434 http://www.perisys.net <http://www.perisys.net/> This email and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and may contain confidential and/or proprietary material. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Perimeter Systems, Inc. Finally, the recipient should check this email and any attachments for the presence of viruses. Perimeter Systems, Inc. accepts no liability for any damage caused by any virus transmitted by this email.

1 0

NAV 3 RC2 Foundry Switch Support
by kreide＠gmail.com 17 Aug '05

17 Aug '05

> Right now, I'm looking at a Foundry FES X424. It's a version of the > I see 39 SNMP OIDs listed. They are: All the info you gave me looks good and at least ports 1-7 and 24 (uplink I assume) should show up. Can you grep the getDeviceData.log file for 'dbfesx424-uunet3.be.weather.com' and give me the output, as well as any messages in the getDeviceData-stderr.log file? Hopefully this will give an indication on why the ports are not showing up. -- Kristian

1 0

[Nav-users] postgresql will not allow connections from software after ip-change
by BuleSari＠khio.no 16 Aug '05

16 Aug '05

Hi, postgresql will not allow connections from software/script after ip-change, I cannot figure out why. If I manually connect to postgresql it works fine. Here are to two transcripts from software output and from terminal output. Date: Tue, 2 Aug 2005 17:10:02 +0200 From: Cron Daemon <root(a)nav.admin.khio.no> To: root(a)nav.admin.khio.no Subject: Cron <navcron@nav> $BINDIR/thresholdMon.py >> $LOCALSTATEDIR/log/thresholdMon.log Traceback (most recent call last): File "/usr/local/nav/bin/thresholdMon.py", line 39, in ? conn = db.getConnection('thresholdmon','manage') File "/usr/local/nav/lib/python/nav/db/__init__.py", line 86, in getConnection connection = psycopg.connect('host=%s dbname=%s user=%s password=%s' % psycopg.OperationalError: could not connect to server: Connection refused Is the server running on host localhost and accepting TCP/IP connections on port 5432? Does anybody have an idea of why this is happening? Thanx in advance. Mvh Bulent Sarinc IT.-advisor at KHIO

1 0

NAV + External software
by kreide＠gmail.com 16 Aug '05

16 Aug '05

> Ah, yes, Arnold is the thing I read about. Can you tell me how to > contact John-Magne, or do you know if Arnold is available for download > (as stable or even development version)? I would definitely like to try Yes, it is available from our svn server: https://svn.itea.ntnu.no/repos/nav/navme/branches/post-3.0-features/subsyst… You can reach John-Magne at bredal(a)itea.ntnu.no for any questions, however, he might be on vacation currently. > the reasons you mentioned. We have already started using NAV instead of > Cisco Works for the most part. That is nice to hear. If you have time, please let us know how NAV is working for you and any issues you have with it and would like us to improve in a future version. -- Kristian

1 0

- ImportError: cannot import name Account
by Pete.Hoffswell＠davenport.edu 15 Aug '05

15 Aug '05

Hi Morten networker2:~ # python Python 2.3.3 (#1, Feb 5 2005, 16:46:56) [GCC 3.3.3 (SuSE Linux)] on linux2 Type "help", "copyright", "credits" or "license" for more information Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working. . >>> from nav.db.navprofiles import Account Traceback (most recent call last): File "<stdin>", line 1, in ? ImportError: cannot import name Account >>> Aditya Rajgarhia <arajgarh(a)iwu.edu> did mention software versions. Do you have any suggestions as to which packages I should maybe look at? -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 01/08/2005 13:21, Pete Hoffswell uttered: > I get this directly after restarting apache: > Mod_python error: "PythonHeaderParserHandler nav.web"Traceback (most > recent call last): File > "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in > HandlerDispatch result = object(req) File > "/usr/local/nav/lib/python/nav/web/__init__.py", line 45, in > headerparserhandler import nav.web.auth File > "/usr/local/nav/lib/python/nav/web/auth.py", line 34, in ? from > nav.db.navprofiles import Account, Accountnavbar, > NavbarlinkImportError: cannot import name Account Looks like more strange circular import problems, but we see none of those here. What happens if you start your python interpreter and just enter this line: "from nav.db.navprofiles import Account"? BTW; Please do not post HTML to the list (as mentioned on http://mailman.itea.ntnu.no/mailman/listinfo/nav-users) - although your mailer produces an alternative plaintext content, it mucks up the text formatting of the errors you quoted, making them harder to read. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFC7yjmXxIl0kpcOkQRAnTDAJ0TCSbcf/wyeLZBCkEa3GZHyhSgEwCgiWwa pSAvLPOd2TWzQaPea43KpLA= =aVRa -----END PGP SIGNATURE-----

1 0

Problems with getDeviceData
by kreide＠gmail.com 12 Aug '05

12 Aug '05

> I have added a wsc5505 to NAV, but NAV only detects 2 snmpoid's for the > switch. I have no problems with wsc2948, cat2950, wsc4006, cat4506, > cat295024G You can try to set the uptodate field in the netbox table to false to re-detect OIDs since it seems like the OID tester was not able to properly detect all OIDs. Use the following command: UPDATE netbox SET uptodate=false WHERE ip='<ip>'; We should probably add a link to the IP device center for re-testing OIDs for a device. -- Kristian

1 0

Problems with getDeviceData
by kreide＠gmail.com 12 Aug '05

12 Aug '05

> I also have a problem with a wsc5505. I have 3 5000-series Cisco switches, > two wsc5505 and one wsc5000. One wsc5505 and the wsc5000 run CatOS 5.5(20) > and seems to work well. The other wsc5505 run CatOS 5.5(14) and that one > gives me problems with the new RC2. It found the modules/ports and sw/hw > versions in RC1. Here is the last lines in the getDeviceData.log file: > Aug 09 09:28:41 2005 secretname-sw.hsh.no_03 QUERY_NETBOX_T03-6-RUN TimeoutException: Too many timeouts, giving up It seems there is some problem getting SNMP data from the device. You are sure the community string is correct? Upgrading the firmware might also help. -- Kristian

1 0

NAV doesn't show some data
by bertove＠gmail.com 11 Aug '05

11 Aug '05

Hi: I got nav installed and running for the most. However there is one feature that is important to me and I can't see it (although I'm sure it's there, probably my configuration is bad). When I track a machine by the mac address, I want to see which port of which router it is connected to, so that I can take off the machine immediately (physically) if I need to. RIght now, for example, I have a core switch 10.0.0.5 and there's a router 10.0.6.1 which is connected to the core. So if I track (by mac address) a machine connected to 10.0.6.1, nav tells me that it is connected to 10.0.0.5, which doesn't help me since I want to know the port on 10.0.6.1. By the way, data is being colected by cricket (I can see in the graphs). What could it be then? Is it due to wrong type selection for the ip devices? Regarding that, does it make a difference if I select GSW for all switches (SW and EDGE) ? Thanks!

2 1

NAV 3 RC2 Foundry Switch Support
by chouston＠gmail.com 11 Aug '05

11 Aug '05

Hi Guys, I am liking NAV quite a bit here, and would like to know how to get some of my Foundry stuff working a little better with it. For instance, I have a 7140 that currently (until next Tuesday morning) is providing gateways for a back-end network at a colocation facility. For it's directly connected networks, I can get MAC information in the machine tracker. This is highly cool. The design we have adopted as our standard since moving up to gigabit interconnections employs two Foundry FES X448 distribution switches running VRRP-E to float the gateway. The edge switches are connected to both of these distribution switches using 1q trunks, and the VLANs we extend to the edge are running spanning tree. The distribution swithces are connected back to a carrier network via /30 subnets, and routes are learned by them from the carrier using OSPF. In the machine tracker, I cannot search for MAC information for any of the networks owned by my Foundry switches. I can get DNS reverses, but not MACs. This would be a very cool and needed thing for us. Also, the EdgeIrons are in the database, but I get pretty much no information for them that I can find. No port information or anything. I am thinking the problems I am having are related to what SNMP information getDeviceData knows how to ferret out of the devices, but this may very well be the wrong impression to have. What information would I need to supply from either Foundry documentation, or NAV application logs that might help figure out how to fix this stuff? -- Later, Carlton Houston chouston(a)gmail.com

1 0

NAV 3 RC2 General Question
by chouston＠gmail.com 10 Aug '05

10 Aug '05

Hi All, First, I think this project has a great deal of potential, but it's merely a feeling at this point. I can't get much of anything to work. I have stopped getting python errors for the things I have been trying to get working. This without changing any code, just ironing out the details of how things should be installed, etc. I have added several switches, none of which were recognized types. These are: Foundry EdgeIron 24G-A (4) Foundry FastIron x448 Premium (2) Foundry EdgeIron 48G (1) Cisco 7140 (1) Again, this is just a few little things to start to get a feel for how things are supposed to work in NAV. I did snmp queries for the numeric value of the SysObjectID for each type, and with the exception of a difference in the 24 port edgeirons, I think because of a code revision, NAV was completely happy, and felt it recognized each box type as I added them. It was able to record the serial numbers on the edgeiron switches and the cisco 7140. I don't think the FES exposes the serial number via the console or SNMP. I get nothing in cricket at all, even though I think I have all the dependencies, etc. Until 4pm yesterday, I was getting this error in the getDeviceData.log file. It stopped mysteriously: getDeviceData.log:Aug 09 15:59:37 2005 getDeviceData_01 QUERY_NETBOX_T01-3-RUN Caught exception, should not happen: snmp/SNMPException Now I get this: Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-5-UPDATE_TYPES Num types: 33, num OIDs: 168, new oidQ: 0 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: wcuunet.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: twccore448-2.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: twccore448-1.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.23 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.21 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.22 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.24 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: 192.168.69.25 Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-6-UPDATE_NETBOXES No OIDs found for netbox: wxcat2.be.weather.com Aug 10 11:54:37 2005 getDeviceData UPDATE_DATA-5-UPDATE_NETBOXES Num netboxes: 9 (9 high, 0 new, 0 removed, 0 skipped, 0 runq, 0 active) That actually looks fine, except that I have no idea how to add an OID, and I am at a loss as to where to find documentation for it. I did a psql query on the snmpoid table, but I am unclear as to what OID I should throw in for, say, interface stats, and what response I am looking for. Any help here would be nice. Also, I get nothing but the java application with the refresh button, etc, on the vlanMap. How do I make that show stuff? There's also nothing at all listed in the network explorer. When I go into the manage devices thing, it sees all the boxes, but lists no modules for any of them. What does that mean? Any help with any of this would be greatly appreciated. -- Later, Carlton Houston chouston(a)gmail.com

2 1

Traffic Map shows nothing :/
by arajgarh＠iwu.edu 10 Aug '05

10 Aug '05

I've added a few IP devices and they show up fine. But when I click on the traffic map, all I see is the applet loading up (with the java logo). I wait but nothing happens. It's not the browser since I've tried from many computers. By the way, I'm using SSL. Any ideas? Thanks >From peder.sefland at hivolda.no Wed Aug 10 12:13:37 2005 From: peder.sefland at hivolda.no (Peder Magne Sefland) Date: Wed Aug 10 11:14:24 2005 Subject: [Nav-users] errors in alertprofil Message-ID: <s2f9e186.051(a)HVO-3.hivolda.no> When I enter the alertprofile I got these error Error creating header. navTemplate.py throws errors: Traceback (most recent call last): File "/usr/local/nav/bin/navTemplate.py", line 107, in ? main(sys.argv[1:]) File "/usr/local/nav/bin/navTemplate.py", line 79, in main print page File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 606, in respond write(filter(VFFSL(SL,"standardCSS",0)(), rawExpr='$standardCSS()')) # from line 101, col 1. File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 89, in standardCSS if VFFSL(SL,"user.preferences.hidelogo",1): NameMapper.NotFound: cannot find 'preferences' while searching for 'user.preferences.hidelogo' And there was no link to get back to the main-page of nav. I running nav3 rc2 on RHEL4 Peder Magne Sefland Avd. ingeni?r | Divisional Engineer IT-avd. | Computer Dep. H?gskulen i Volda | Volda University College Postboks 500 | Post Box 500 6101 VOLDA | N-6100 VOLDA | NORWAY 70075284 (kontor) | +4770075284 (Office) 90823914 (mob.) | +4790823914 (mobile)

2 1

Re: Error in installing nav on RHEL4
by roger.aas＠hsh.no 09 Aug '05

09 Aug '05

Hi Peder. Try editing /etc/selinux/config and setting SELINUX=disabled, then rebooting and test the same again. If it works it is SElinux that stops it from working. You could also try setting it to permissive, then you will only get audits about it but it should work. I see that there is no settings for the python-lib in the file /etc/selinux/targeted/contexts/files/file_contexts so that may be the reason it complains. - Roger Peder Magne Sefland wrote: > But I installed SUlinux and firewall. > > When I tried to access the webpage I get this error > > Mod_python error: "PythonHeaderParserHandler nav.web" > > Traceback (most recent call last): > > File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch > result = object(req) > > File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler > nav.web.auth.authenticate(req) > > File "/usr/local/nav/lib/python/nav/web/auth.py", line 90, in authenticate > conn = db.getConnection('navprofile', 'navprofile') > > AttributeError: 'module' object has no attribute 'getConnection' > > > And on the console I get even more errors > > # audit(1123578062.447.0): avc: denied { execute } for pid=1791 comm=httpd path=/usr/lib/python2.3/site-packages/psycopgmodule.so dev=dm-0 ino=489605 scontext=user_u:system_r:httpd_t tcontext=root:object_r:etc_t tclass=file

1 0

Error in installing nav on RHEL4
by peder.sefland＠hivolda.no 09 Aug '05

09 Aug '05

I have follow the instruction on http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 But I installed SUlinux and firewall. The installation went great, and when I run /usr/local/nav/bin/nav status everything is up and running. mactrace: Up cricket: Up eventEngine (pid 3020) is running... logengine: Up maintengine: Up servicemon.py (pid 3054) is running... smsd.pl (pid 3082) is running... thresholdMon: Up networkDiscovery: Up iptrace: Up safe_smsd: Up getDeviceData (pid 3114) is running... backup: Up pping.py (pid 3123) is running... Alertengine is running with process id 3156. It has been running for 0 minutes and 8 seconds. When I tried to access the webpage I get this error Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler nav.web.auth.authenticate(req) File "/usr/local/nav/lib/python/nav/web/auth.py", line 90, in authenticate conn = db.getConnection('navprofile', 'navprofile') AttributeError: 'module' object has no attribute 'getConnection' And on the console I get even more errors # audit(1123578062.447.0): avc: denied { execute } for pid=1791 comm=httpd path=/usr/lib/python2.3/site-packages/psycopgmodule.so dev=dm-0 ino=489605 scontext=user_u:system_r:httpd_t tcontext=root:object_r:etc_t tclass=file Peder Magne Sefland Avd. ingeni?r | Divisional Engineer IT-avd. | Computer Dep. H?gskulen i Volda | Volda University College Postboks 500 | Post Box 500 6101 VOLDA | N-6100 VOLDA | NORWAY 70075284 (kontor) | +4770075284 (Office) 90823914 (mob.) | +4790823914 (mobile)

1 0

AlertProfiles problem
by roger.aas＠hsh.no 09 Aug '05

09 Aug '05

I get this error when I go to Toolbox/AlertProfiles: Error creating header. navTemplate.py throws errors: Traceback (most recent call last): File "/usr/local/nav/bin/navTemplate.py", line 107, in ? main(sys.argv[1:]) File "/usr/local/nav/bin/navTemplate.py", line 79, in main print page File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 606, in respond write(filter(VFFSL(SL,"standardCSS",0)(), rawExpr='$standardCSS()')) # from line 101, col 1. File "/usr/local/nav/lib/python/nav/web/templates/MainTemplate.py", line 89, in standardCSS if VFFSL(SL,"user.preferences.hidelogo",1): NameMapper.NotFound: cannot find 'preferences' while searching for 'user.preferences.hidelogo' Also in the lower left corner I get this message both with FireFox and IE: StyleSheets Your Internet browser do not support style sheets. We reccomend using a browser which support style sheets with Alert Profiles. Someone know why I get this error? This is in RC2, I did not get this in RC1. - Roger -- Roger Aas Stord/Haugesund College

1 0

Can't add devices
by mhall＠newsstand.com 09 Aug '05

09 Aug '05

Matt Hall wrote: > Matt Hall wrote: > >> Matt Hall wrote: >> >>> try to: >>> >>>> stop nav >>>> psql manage >>>> delete from rrd_file where subsystem='cricket'; >>>> run makecricketconfig.pl as user navcron >>>> nav start >>>> >>>> >>> Done >>> >>>> >>>> >>>>> , or macs, it appears data is not being collected. > >>>>> >>>> >>>> >>>> >>>> >>>> What is getDeviceData.log telling you? >>>> >>>> >>>> >>> Guess I am still getting that error: >>> >>> Aug 08 14:38:01 2005 getDeviceData MAIN-5-INIT Running with 16 >>> threads (max) >>> Aug 08 14:38:01 2005 getDeviceData MAIN-3-INIT Could not connect to >>> database! >>> >>> This seems to look wrong, when I execute the nav startup script with >>> a status command I get the following: >>> >>> networkDiscovery: Up >>> cricket: Up >>> eventEngine does not seem to be running... >>> logengine: Up >>> maintengine: Up >>> servicemon.py (pid 2039) is running... >>> smsd.pl (pid 2050) is running... >>> thresholdMon: Up >>> mactrace: Up >>> iptrace: Up >>> safe_smsd: Up >>> getDeviceData does not seem to be running... >>> backup: Up >>> pping.py (pid 2079) is running... >>> Alertengine is running with process id 2089. >>> It has been running for 0 minutes and 31 seconds. >>> >>> Should I be worried that getDeviceData is no running? >>> >>> My path is showing correctly now in the cron jobs...Yeah!!! >>> >>> But I'm getting a notification from cron now that follows: >>> >>> Subject: smsd database connection problem >>> >>> >>> Status: 08.08.2005 14:54:04 PG_conn=SCALAR(0x8175b44) 1 >>> Reset >>> >>> Error was: >>> server closed the connection unexpectedly >>> This probably means the server terminated abnormally >>> before or while processing the request. >>> >>> >>> >>> I think I still have a path problem. I'm thinking the path still >>> isn't getting sourced in the startup script correctly. Maybe I >>> should change it from a bourne script to a bash script and use the >>> "source" command. >>> >>> Thanks for the help guys. >>> >>> Matt >>> _______________________________________________ >>> Nav-users mailing list >>> Nav-users(a)itea.ntnu.no >>> http://mailman.itea.ntnu.no/mailman/listinfo/nav-users >> >> >> >> Just as an FYI I gave up and symbolically linked everything into >> /usr/local/jdk1.4.2/jre/lib/ext. >> Things seem to be working now, but I'm worried that I'll have problem >> with other environmental variables not being set. >> Any freebsd people here have suggestions on how to globally export >> this? I tried /etc/profile, but that doesn't seem to work since it >> isn't running with a login prompt. Freebsd has no /etc/profile.d and >> the only other option I can think of is using bash instead of sh in >> my startup scripts so that I can use the "source" statement instead >> of just using a ".". I'm not sure if this will work. > > > One step closer, now that the symlinks are inSQLException for update > statement: INSERT INTO swport > (swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) > VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') > org.postgresql.util.PSQLException: This statement has been closed. > at > org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Statement.java:2304) > > at > org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2Statement.java:432) > > at > org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:268) > > at no.ntnu.nav.Database.Database.update(Database.java:987) > at no.ntnu.nav.Database.Database.insert(Database.java:911) > at > no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(SwportHandler.java:217) > > at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) > at QueryNetbox.run(QueryNetbox.java:775) > place I get SQL Exeptions in the getDeviceData-stderr.log: > > Matt Sorry, here is the proper cut and paste job: One step closer, now that the symlinks are in place I get SQL Exeptions in the getDeviceData-stderr.log: SQLException for update statement: INSERT INTO swport (swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') org.postgresql.util.PSQLException: This statement has been closed. at org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Statement.java:2304) at org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2Statement.java:432) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:268) at no.ntnu.nav.Database.Database.update(Database.java:987) at no.ntnu.nav.Database.Database.insert(Database.java:911) at no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(SwportHandler.java:217) at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) at QueryNetbox.run(QueryNetbox.java:775) Matt >From arajgarh at iwu.edu Mon Aug 8 16:34:38 2005 From: arajgarh at iwu.edu (Aditya Rajgarhia) Date: Mon Aug 8 22:34:48 2005 Subject: [Nav-users] Can't add devices Message-ID: <966713.1123533278086.JavaMail.arajgarh(a)iwu.edu> I used to get those org.postgresql.jdbc2 errors. I messed with different versions of the jdbc postgresql drivers and it fixed those: http://jdbc.postgresql.org/download.html Put the jar file in the jre/lib/ext directory, try different versions maybe like I did. ------------------------------------------------------------------------ ---------------------------- >SQLException for update statement: INSERT INTO swport >(swportid,moduleid,port,ifindex,interface,link,speed,duplex,vlan,trunk) >VALUES ('20','6','05','6','FastEthernet0/5','y','100','f','1','f') >org.postgresql.util.PSQLException: This statement has been closed. > at >org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Sta tement.java:2304) > > at >org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2 Statement.java:432) > > at >org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2S tatement.java:268) > > at no.ntnu.nav.Database.Database.update(Database.java:987) > at no.ntnu.nav.Database.Database.insert(Database.java:911) > at >no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(Sw portHandler.java:217) > > at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) > at QueryNetbox.run(QueryNetbox.java:775) > > >Matt >_______________________________________________ >Nav-users mailing list >Nav-users(a)itea.ntnu.no >http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > ---------------- Aditya Rajgarhia 305 Kemp Hall x2042 arajgarh(a)iwu.edu >From arajgarh at iwu.edu Mon Aug 8 16:36:37 2005 From: arajgarh at iwu.edu (Aditya Rajgarhia) Date: Mon Aug 8 22:36:42 2005 Subject: [Nav-users] NullPointerException Message-ID: <4556391.1123533397154.JavaMail.lumadmin(a)my.iwu.edu> I get this in the getDeviceData-stderr.log whenever it tries to get data. Any clue? THanks java.lang.NullPointerException at no.ntnu.nav.getDeviceData.deviceplugins.StaticRoutes.StaticRoutes.proces sCiscoGw(StaticRoutes.java:261) at no.ntnu.nav.getDeviceData.deviceplugins.StaticRoutes.StaticRoutes.handle Device(StaticRoutes.java:127) at QueryNetbox.run(QueryNetbox.java:770) ---------------- Aditya Rajgarhia 305 Kemp Hall x2042 arajgarh(a)iwu.edu >From roar.pettersen at uib.no Tue Aug 9 09:21:41 2005 From: roar.pettersen at uib.no (Roar Pettersen) Date: Tue Aug 9 08:21:50 2005 Subject: [Nav-users] Can't add devices In-Reply-To: <42F7BAFF.9080506(a)newsstand.com> References: <200508081944.j78JiHHW039752(a)duke.cc.uit.no> <42F7B91F.4040502(a)newsstand.com> <42F7BAFF.9080506(a)newsstand.com> Message-ID: <Pine.GSO.4.61.0508090819190.24379(a)alf.uib.no> Hello ! > Any freebsd people here have suggestions on how to globally export this? I > tried /etc/profile, but that doesn't seem to work since it isn't running with > a login prompt. Freebsd has no /etc/profile.d and the only other option I > can think of is using bash instead of sh in my startup scripts so that I can > use the "source" statement instead of just using a ".". I'm not sure if this > will work. A good advise is to always use bash as shell and put the enviroment varibles in the eg .bash_profile : cat /root/.bash_profile export PYTHONPATH=/usr/local/nav/lib/python export JAVA_HOME=/usr/local/jdk1.4.2 export PATH=$PATH:/usr/local/nav/bin:/usr/local/jdk1.4.2/bin export PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib export CLASSPATH="`echo /usr/local/nav/lib/java/*.jar | tr ' ' ':'`:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/ja va/classes/snmp.jar" -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen Nygardsgt. 5 - N-5020 BERGEN - Norway Tlf: +47 55 58 40 55 VIP: 81503 fax: +47 55 58 40 70 roar.pettersen(a)it.uib.no - IT-Avd, UiB - http://www.uib.no >From Jan.Susegg at hint.no Tue Aug 9 10:10:54 2005 From: Jan.Susegg at hint.no (Susegg, Jan) Date: Tue Aug 9 09:08:54 2005 Subject: [Nav-users] Problems with getDeviceData Message-ID: <8A65B72C71E7484FBE1862045AAC5A8FB73B24(a)embla.ansatt.hint.no> Skipped content of type multipart/alternative

1 0

Can't add devices
by Borge.Brunes＠cc.uit.no 09 Aug '05

09 Aug '05

mhall(a)newsstand.com said: > I also tried adding "su -f -m navcron -c" for my startup script exec > to ensure that it was kicked off as navcron. I don't think I'm > getting the error anymore good. > but there are no ports showing up for my > devices in NAV try to: stop nav psql manage delete from rrd_file where subsystem='cricket'; run makecricketconfig.pl as user navcron nav start > , or macs, it appears data is not being collected. > What is getDeviceData.log telling you? > I may have gotten ahead of myself and screwed some things up. I'm > sorry guys, I'm not much of a sysadmin, mostly a network architect > type of guy. Most of us are :-) > FYI I'm getting this error from cron: > Subject: Cron <navcron@aus-nav-1> $BINDIR/getBoksMacs.sh $NUM_THREADS > X-Cron-Env: <PERL5LIB=> X-Cron-Env: <PYTHONPATH=> X-Cron-Env: <CLASSPATH=> > X-Cron-Env: <BINDIR=/usr/local/nav/bin> X-Cron-Env: <LOCALSTATEDIR=/usr/local/ > nav/var> X-Cron-Env: <PATH=/usr/bin:/bin:/usr/local/bin> X-Cron-Env: > <MAILTO=root@localhost> X-Cron-Env: <CRICKETDIR=/usr/local/cricket> > X-Cron-Env: <NUM_THREADS=24> X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/ > usr/local/nav> X-Cron-Env: <LOGNAME=navcron> X-Cron-Env: <USER=navcron> > createConnection ClassNotFoundExecption error: org.postgresql.Driver Something is wrong with your enviroment. Here is is mine: Subject: Cron <navcron@franklin> $BINDIR/getBoksMacs.sh $NUM_THREADS X-cron-env: <PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib> X-cron-env: <PYTHONPATH=/usr/local/nav/lib/python> X-cron-env: <CLASSPATH=/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/java/Database.jar:/usr/local/nav/lib/java/Event.jar:/usr/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.jar:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/java/classes/snmp.jar> X-cron-env: <BINDIR=/usr/local/nav/bin> X-cron-env: <LOCALSTATEDIR=/usr/local/nav/var> X-cron-env: <PATH=/usr/bin:/bin:/usr/local/bin> X-cron-env: <MAILTO=root@localhost> X-cron-env: <CRICKETDIR=/usr/local/cricket> X-cron-env: <NUM_THREADS=24> X-cron-env: <SHELL=/bin/sh> X-cron-env: <HOME=/usr/local/nav> X-cron-env: <LOGNAME=navcron> X-cron-env: <USER=navcron> regards, -- Borge Brunes, Computer Center, University of Tromso, Norway http://www.cc.uit.no/~borge/ | http://www.freebsd.org

2 2

Can't add devices
by mhall＠newsstand.com 08 Aug '05

08 Aug '05

Borge Brunes wrote: >mhall(a)newsstand.com said: > > >>Ok now I get a new problem, I can't seem to get my Classpath and such loaded >>for the scripts. GetDeviceData-stderr.log is popping out "createConnection >>ClassNotFoundExecption error: org.postgresql.Driver. I've added the contents >>of the navenv.sh to the /etc/profile and I am sourcing this file in all of >>the startup scripts in /usr/local/etc/rc.d using ". /etc/profile" . I >>inserted a "set" and piped it to a file in all of the startup scripts so that >>I could make sure their environments were right during startup, and they all >>seem to be. >> >> > > > >>I'm at a loss on how to fix this now, any suggestions? >> >> > >http://desperados.itea.ntnu.no/pipermail/nav-users/2005-July/000875.html >Could you give us the output from 'env' in the shell you have started NAV? > >Have you innstalled NAV from ports? > >regards, > > > I installed from the ports tree. env output: HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/jdk1.4.2/bin:/usr/local/nav/bin:/usr/local/jdk1.4.2/bin PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib CLASSPATH=/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/java/Database.jar:/usr/local/nav/lib/java/Event.jar:/usr/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.jar:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/java/classes/snmp.jar JAVA_HOME=/usr/local/jdk1.4.2 PYTHONPATH=/usr/local/nav/lib/python I also tried adding "su -f -m navcron -c" for my startup script exec to ensure that it was kicked off as navcron. I don't think I'm getting the error anymore but there are no ports showing up for my devices in NAV, or macs, it appears data is not being collected. I may have gotten ahead of myself and screwed some things up. I'm sorry guys, I'm not much of a sysadmin, mostly a network architect type of guy. Matt >From mhall at newsstand.com Mon Aug 8 15:11:12 2005 From: mhall at newsstand.com (Matt Hall) Date: Mon Aug 8 21:11:25 2005 Subject: [Nav-users] Can't add devices In-Reply-To: <42F7AD5E.7080101(a)newsstand.com> References: <200508081832.j78IW96C039014(a)duke.cc.uit.no> <42F7AD5E.7080101(a)newsstand.com> Message-ID: <42F7AE50.4020600(a)newsstand.com> Matt Hall wrote: > Borge Brunes wrote: > >> mhall(a)newsstand.com said: >> >> >>> Ok now I get a new problem, I can't seem to get my Classpath and >>> such loaded >>> for the scripts. GetDeviceData-stderr.log is popping out >>> "createConnection >>> ClassNotFoundExecption error: org.postgresql.Driver. I've added the >>> contents >>> of the navenv.sh to the /etc/profile and I am sourcing this file in >>> all of >>> the startup scripts in /usr/local/etc/rc.d using ". /etc/profile" . I >>> inserted a "set" and piped it to a file in all of the startup >>> scripts so that >>> I could make sure their environments were right during startup, and >>> they all >>> seem to be. >>> >> >> >> >> >>> I'm at a loss on how to fix this now, any suggestions? >>> >> >> >> http://desperados.itea.ntnu.no/pipermail/nav-users/2005-July/000875.html >> Could you give us the output from 'env' in the shell you have started >> NAV? >> Have you innstalled NAV from ports? >> >> regards, >> >> >> > I installed from the ports tree. > env output: > HOME=/ > PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/jdk1.4.2/bin:/usr/local/nav/bin:/usr/local/jdk1.4.2/bin > > PERL5LIB=/usr/local/nav/lib/perl:/usr/local/cricket/cricket/lib > CLASSPATH=/usr/local/nav/lib/java/ConfigParser.jar:/usr/local/nav/lib/java/Database.jar:/usr/local/nav/lib/java/Event.jar:/usr/local/nav/lib/java/Logger.jar:/usr/local/nav/lib/java/NetboxInfo.jar:/usr/local/nav/lib/java/SimpleSnmp.jar:/usr/local/nav/lib/java/Util.jar:/usr/local/share/java/classes/postgresql.jar:/usr/local/share/java/classes/snmp.jar > > JAVA_HOME=/usr/local/jdk1.4.2 > PYTHONPATH=/usr/local/nav/lib/python > > I also tried adding "su -f -m navcron -c" for my startup script exec > to ensure that it was kicked off as navcron. I don't think I'm > getting the error anymore but there are no ports showing up for my > devices in NAV, or macs, it appears data is not being collected. > > I may have gotten ahead of myself and screwed some things up. I'm > sorry guys, I'm not much of a sysadmin, mostly a network architect > type of guy. > > Matt > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users FYI I'm getting this error from cron: Subject: Cron <navcron@aus-nav-1> $BINDIR/getBoksMacs.sh $NUM_THREADS X-Cron-Env: <PERL5LIB=> X-Cron-Env: <PYTHONPATH=> X-Cron-Env: <CLASSPATH=> X-Cron-Env: <BINDIR=/usr/local/nav/bin> X-Cron-Env: <LOCALSTATEDIR=/usr/local/nav/var> X-Cron-Env: <PATH=/usr/bin:/bin:/usr/local/bin> X-Cron-Env: <MAILTO=root@localhost> X-Cron-Env: <CRICKETDIR=/usr/local/cricket> X-Cron-Env: <NUM_THREADS=24> X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/usr/local/nav> X-Cron-Env: <LOGNAME=navcron> X-Cron-Env: <USER=navcron> createConnection ClassNotFoundExecption error: org.postgresql.Driver

1 0

Can't add devices
by mhall＠newsstand.com 06 Aug '05

06 Aug '05

I've fixed all the little python problems so far with my freebsd install. Everything seems to work now except adding devices. I have all the rooms and locations setup but when I try and add an actual router I get the following error: Error: pysnmpap.cli.error.BadArgumentError: Parser error at ObjectName: public: Malformed Object ID .1.3.6.1.2.1.public at ObjectName: invalid literal for long(): public Where public is the RO snmp string. Thanks

1 0

- ImportError: cannot import name Account
by Pete.Hoffswell＠davenport.edu 01 Aug '05

01 Aug '05

Any ideas? Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working. >>> Pete Hoffswell 7/28/2005 4:46 PM >>> Update: I get this directly after restarting apache: Mod_python error: "PythonHeaderParserHandler nav.web"Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 45, in headerparserhandler import nav.web.auth File "/usr/local/nav/lib/python/nav/web/auth.py", line 34, in ? from nav.db.navprofiles import Account, Accountnavbar, NavbarlinkImportError: cannot import name Account But after a page reload, I get the following: Mod_python error: "PythonHeaderParserHandler nav.web"Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler nav.web.auth.authenticate(req)AttributeError: 'module' object has no attribute 'authenticate' Any thoughts? Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working. >>> "Pete Hoffswell" <Pete.Hoffswell(a)davenport.edu> 7/28/2005 4:29 PM >>> Hello - I am trying to get a new installation of NAV (nav-3.0_rc2-1.noarch.rpm) running on my standard installation of SuSE 9.1 SLES. I have followed the regular installation directions.

1 0

by thomasbell＠weber.edu 30 Jul '05

30 Jul '05

I receive error below when trying to access the toolbox > network explorer. Could some elaborate on what could be causing this. --Tom Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/nav/web/pyproxy/proxy.py", line 60, in handler user=user, session=req.session.id) File "/usr/lib/python2.3/site-packages/nav/web/pyproxy/proxy.py", line 123, in doRequest request.request(method, path, query, headers) File "/usr/lib/python2.3/httplib.py", line 721, in request self._send_request(method, url, body, headers) File "/usr/lib/python2.3/httplib.py", line 742, in _send_request self.endheaders() File "/usr/lib/python2.3/httplib.py", line 715, in endheaders self._send_output() File "/usr/lib/python2.3/httplib.py", line 600, in _send_output self.send(msg) File "/usr/lib/python2.3/httplib.py", line 567, in send self.connect() File "/usr/lib/python2.3/httplib.py", line 551, in connect raise socket.error, msg error: (111, 'Connection refused') >From kreide at gmail.com Fri Jul 29 15:21:20 2005 From: kreide at gmail.com (Kristian Eide) Date: Fri Jul 29 23:21:25 2005 Subject: [Nav-users] In-Reply-To: <s2ea3c3e.038(a)gwvsmta2.weber.edu> References: <s2ea3c3e.038(a)gwvsmta2.weber.edu> Message-ID: <b4c110fd05072914212309be3a(a)mail.gmail.com> > I receive error below when trying to access the toolbox > network > explorer. > Could some elaborate on what could be causing this. Did you remember to start tomcat? -- Kristian

1 0

RC2 and Java
by kreide＠gmail.com 29 Jul '05

29 Jul '05

> Ofcourse, it may have nothing to do with NAV, perhaps it's just that the > snmp class (from westhawk) doesn't work with JDK 1.5. Actually, we don't use the Westhawk SNMP stack anymore, so this might be the problem. We now use the Java SNMP stack from here: http://edge.mcs.drexel.edu/GICL/people/sevy/snmp/ -- Kristian

1 0

RC2 and Java
by arajgarh＠iwu.edu 29 Jul '05

29 Jul '05

I installed RC2 on Fedora Core 4 today, installed perfectly using the RHEL4 guide. However, I have this problem in the getDeviceData.log for each IP Device that it queries : java.lang.NoClassDefFoundError: snmp/SNMPException at QueryNetbox.run(QueryNetbox.java:703) So I'm not collecting any data. Do you think the problem is Java 1.5 ? I have the snmp jar placed in the jre/lib/ext directory. IF Java 1.5 is a known bug then I will downgrade. Thanks ---------------- Aditya Rajgarhia 305 Kemp Hall x2042 arajgarh(a)iwu.edu >From Pete.Hoffswell at davenport.edu Thu Jul 28 17:29:22 2005 From: Pete.Hoffswell at davenport.edu (Pete Hoffswell) Date: Thu Jul 28 22:29:56 2005 Subject: [Nav-users] New Installation - ImportError: cannot import name Account Message-ID: <s2e907f7.040(a)pop.davenport.edu> Hello - I am trying to get a new installation of NAV (nav-3.0_rc2-1.noarch.rpm) running on my standard installation of SuSE 9.1 SLES. I have followed the regular installation directions. Upon accessing the NAV webpage, I get this: *-- Mod_python error: "PythonHeaderParserHandler nav.web"Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 45, in headerparserhandler import nav.web.auth File "/usr/local/nav/lib/python/nav/web/auth.py", line 34, in ? from nav.db.navprofiles import Account, Accountnavbar, Navbarlink*-- Any idea what my problem might be? The installation looked to go fine to me. Thank you. Pete Hoffswell 616-732-1101 (Grand Rapids, x1101) University LAN/WAN Coordinator 616-510-1198 (Mobile) IT Services pete.hoffswell(a)davenport.edu Davenport University http://www.davenport.edu Davenport University. It's working.

1 0

Release-notice: NAV 3.0 RC2
by morten.vold＠ntnu.no 25 Jul '05

25 Jul '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 NAV 3.0 RC2 is now available for download at http://metanav.ntnu.no/ . A number of small, but critical bugs were found in RC1, and have been fixed in this new release candidate. Unless critical bugs are reported in this release candidate, this will be the baseline for NAV 3.0.0. Upgrading from beta RC1 ======================= Some OIDs have been added, and due to a fix in the OID-tester, we strongly recommend you to re-run the SQL script doc/sql/snmpoid.sql, as documented in the README file of the same directory. CHANGES ======= Version 3.0_rc2 (released 20 July 2005) Improvements: * More data for the snmpoid table, please run the new snmpoid.sql to ensure your system will work after an upgrade. * The Service Monitor's RPC plugin no longer complains loudly to stderr. * The Messages and Report web interfaces will no longer intermittently cross-over mysteriously. * The alert message texts have been updated to contain messages for all known alerts. * Overlapping time periods in an alert profile will no longer cause double alerts to be sent. * Modules that are down can now actually be found and deleted in the Device Management interface. * The Traffic Map system and Network Explorer can now be properly configured to run without a single NAV root directory. * Alert Profiles web pages now include the correct stylesheets, so it won't look as funny. * Several getDeviceData-related problems were ironed out. * The menu on Messages' maintenance list is no longer ugly. * IP devices put on maintenance will now be taken off maintenance, instead of remaining on maintenance forever. * Maintenance-scheduled IP devices can now be properly deleted from messages. * Next/previous page-links in reports will now work properly even when using advanced search options. Also, advanced searching on database fields that contain underscores (like sw_ver) will now work. * Performance improvements in the IP Device Center. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFC3j+FXxIl0kpcOkQRAuL/AJ4mRZDumeyw6J5WYEbu2fMElly8rACg06qD JiE2e+s7Ioaa/iHjoby5vEY= =C+7R -----END PGP SIGNATURE----- >From kreide at gmail.com Wed Jul 20 14:06:25 2005 From: kreide at gmail.com (Kristian Eide) Date: Wed Jul 20 22:06:30 2005 Subject: [Nav-users] Tomcat java (class/module) missing error & vlanPlot java error In-Reply-To: <42DE04B3.5050506(a)ntnu.no> References: <E04174B5A513E542AD2CB6C1E18D9C7D4DD55C(a)Exchange.admin.khio.no> <200507191831.06408.kreide(a)gmail.com> <42DE04B3.5050506(a)ntnu.no> Message-ID: <b4c110fd05072013061cfba430(a)mail.gmail.com> > > You need to copy (or symlink) the .jar files from nav/lib/java to the > > shared/lib tomcat directory. > That shouldn't really be necessary if you've already symlinked those > jar-files to $JAVA_HOME/jre/lib/ext/ ? We certainly didn't do this on > our production server, and it still works. I think the recommended procedure is to only put the SNMP and Postgre jars in lib/ext and leave all NAV-specific jars in nav/lib/java. It is then necessary to symlink these files into the shared/lib tomcat directory. Of course symlinking everything into lib/ext works and is simpler :) > > Should we perhaps have a tomcat install guide which mentions this? > If anything were to be put in such a guide, it would be a bit about > whether or not it is necessary to restart Tomcat or delete the extracted > webapp directories when the NAV webapps have been upgraded. I think > you're the expert on this particular subject :) It is probably safest to delete the directories and then restart tomcat (though a better option is to use the webadmin tool to simply redeploy the web applications). -- Kristian

2 2

Bug in Add IP device?
by Ketil.Forselv＠hin.no 23 Jul '05

23 Jul '05

Try to run the following command: Switch(config)#snmp-server chassis-id XXXXXXXXX where XXXXXXXXXX is the "System serial number:" for the switch which you obtain with sh ver. You must manually add this value to all switches in Cat 2900-series. Regards Ketil Asbj?rn Pr?is said: > > > Hello. > On NAV3 rc2 I get this error when trying to add a new catalyst 2924XLv > IP device (category SW) : > > --- snip --- > Add IP device > Error: pysnmp.asn1.error.ValueConstraintError: Single value > constraint for > Version: 0 not within allowed values > --- /snip --- > > If I reload the page, go back and try again, og just hit continue it > disappears! > > Anyone else get this, or is it just me? > > -Asbj?rn- > > _______________________________________________ > Nav-users mailing list > Nav-users(a)itea.ntnu.no > http://mailman.itea.ntnu.no/mailman/listinfo/nav-users > >

2 1

Edited the installation guide for NAV 3.0 on Red Hat EnterpriseLinux 4 to RC2 version
by roger.aas＠hsh.no 23 Jul '05

23 Jul '05

I have edited the step-by-step installation guide for NAV 3.0 on Red Hat Enterprise Linux 4 to cover the RC2 version. You can find it here: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 Please give me feedback when you find errors or omissions so I can fix them. Or if you just want to comment it... :-) I hope this can be of help for someone. Regards, Roger -- Roger Aas Stord/Haugesund College

2 1

SVN repository moved
by morten.vold＠ntnu.no 18 Jul '05

18 Jul '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 For those of you who access the NAV source code using Subversion, the URL to the repository has changed. Any working copies you have from the old URL should be switched to the new URL by issuing this command: svn switch --relocate http://svn.nav.ntnu.no/nav/ \ http://svn.itea.ntnu.no/repos/nav/ (If you are using authenticated access to the repository, change both instances of http into https) The old repository will still be available for about a week, but will not receive any further updates. - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFC22ISXxIl0kpcOkQRAn2GAKCObwdzXmpbbegJkbv+dTDNSeyabgCgvTYA IAliN51QVma5JOoPZVoXZLk= =SO4X -----END PGP SIGNATURE----- >From BuleSari at khio.no Tue Jul 19 14:15:27 2005 From: BuleSari at khio.no (Bulent Sarinc) Date: Tue Jul 19 13:16:08 2005 Subject: [Nav-users] Tomcat java (class/module) missing error & vlanPlot java error Message-ID: <E04174B5A513E542AD2CB6C1E18D9C7D4DD55C(a)Exchange.admin.khio.no> Hi, I get this / these errors when I click at Netword Explorer and vlanPlot links in Toolbox page. (I have setup everything (tomcat, apache, nav, postgresql etc etc) as mentioned in how-to pages for nav.) does anybody have an idea of howto solve this (these) problems? for me it looks like its missing a class or module but I'm not sure thanx in advance Bulent Sarinc khio HTTP Status 500 - ________________________________ type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception javax.servlet.ServletException: Servlet execution threw an exception root cause java.lang.NoClassDefFoundError: no/ntnu/nav/ConfigParser/ConfigParser navAdmin.service(navAdmin.java:38) javax.servlet.http.HttpServlet.service(HttpServlet.java:802) note The full stack trace of the root cause is available in the Apache Tomcat/5.5.9 logs. ________________________________ Apache Tomcat/5.5.9 ________________________________ NAV - Copyright (c) 2003-2004 NTNU ITEA vlanPlot error: A error has occured fetching data from server

1 0

Error adding particular switch
by arajgarh＠iwu.edu 15 Jul '05

15 Jul '05

Below are the errors in the logs. The other logs don't have errors. One noticeable bug is that I can only add two instances of the "Cisco Catalyst 6000 MSFC2" with SysObjectID=1.3.6.1.4.1.9.1.301 If I delete those two I can add two other of those, but can never add more than two. This is not a problem with other switches. Trying to add a third gives me an error: Mod_python error: "PythonHandler editdb" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 156, in handler output = editPage(req,pageList[table](),request,unicodeError) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 463, in editPage outputForm,action) File "/usr/local/nav/apache/webroot/editdb/editdb.py", line 2435, in add disabled=True)) TypeError: __init__() takes at least 2 non-keyword arguments (1 given) ------------------ eventEngine.log: Jul 15 06:41:16 2005 eventEngine EVENTQ_MONITOR_TASK-3-RUN SQLException when fetching from eventq: Operation requires a scrollable ResultSet, but this ResultSet is FORWARD_ONLY. ------------------ networkDiscovery-stderr.log: SQLException: Operation requires a scrollable ResultSet, but this ResultSet is FORWARD_ONLY. org.postgresql.util.PSQLException: Operation requires a scrollable ResultSet, but this ResultSet is FORWARD_ONLY. at org.postgresql.jdbc2.AbstractJdbc2ResultSet.checkScrollable(AbstractJdbc 2ResultSet.java:179) at org.postgresql.jdbc2.AbstractJdbc2ResultSet.beforeFirst(AbstractJdbc2Res ultSet.java:251) at networkDiscovery.avledVlan(networkDiscovery.java:1113) at networkDiscovery.main(networkDiscovery.java:93) ------------------ getDeviceData-stderr.log has a lot of similar errors, this is the last: SQLException for update statement: INSERT INTO swport (swportid,moduleid,ifindex,speed) VALUES ('441','32','63','1000') org.postgresql.util.PSQLException: This statement has been closed. at org.postgresql.jdbc2.AbstractJdbc2Statement.checkClosed(AbstractJdbc2Sta tement.java:2304) at org.postgresql.jdbc2.AbstractJdbc2Statement.getUpdateCount(AbstractJdbc2 Statement.java:432) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2S tatement.java:268) at no.ntnu.nav.Database.Database.update(Database.java:999) at no.ntnu.nav.Database.Database.insert(Database.java:923) at no.ntnu.nav.getDeviceData.dataplugins.Swport.SwportHandler.handleData(Sw portHandler.java:239) at DataContainersImpl.callDataHandlers(DataContainersImpl.java:64) at QueryNetbox.run(QueryNetbox.java:791) ---------------- Aditya Rajgarhia 305 Kemp Hall x2042 arajgarh(a)iwu.edu >From kreide at gmail.com Fri Jul 15 11:22:36 2005 From: kreide at gmail.com (Kristian Eide) Date: Fri Jul 15 19:22:46 2005 Subject: [Nav-users] Error adding particular switch In-Reply-To: <7113539.1121446237565.JavaMail.arajgarh(a)iwu.edu> References: <7113539.1121446237565.JavaMail.arajgarh(a)iwu.edu> Message-ID: <b4c110fd0507151022207f8eb2(a)mail.gmail.com> > when fetching from eventq: Operation requires a scrollable ResultSet, > but this ResultSet is FORWARD_ONLY. The cause of this error is that there was a change in newer JDBC drivers for Postgre which create non-scrollable resultsets by default. We will provide a fix for this in our next RC (expected next week). > SQLException for update statement: INSERT INTO swport > (swportid,moduleid,ifindex,speed) VALUES ('441','32','63','1000') > org.postgresql.util.PSQLException: This statement has been closed. This might be related to the above problem, but I will look into it as well. -- Kristian

1 0

Regarding previous message
by kreide＠gmail.com 13 Jul '05

13 Jul '05

> * createConnection ClassNotFoundExecption error: org.postgresql.Driver* > Note that I have installed the jdbc package, however ROOT cannot use it > even though all other users including navwrite can use it. I tested > using a java file that uses jdbc. What this error means is that the PostgreSQL JDBC driver is not available at the time getDeviceData is run. It is supposed to use the 'navcron' user, so either make sure the JDBC driver is somewhere on the classpath or put (or symlink) the jar file in your jre/lib/ext directory. -- Kristian

1 0

Box being polled for tempInlet
by lars.hakedal＠usit.uio.no 12 Jul '05

12 Jul '05

We have a cat356048G which gets 'cricket-configed' to have a tempInlet, but Cricket complains with 11-Jul-2005 15:30:05*] Received SNMP response with error code noSuchName. OID: 1.3.6.1.4.1.9.9.13.1.3.1.3.1 every five minutes. >From what I understand, getdevicedata asks the box for known OIDs which are then added to the cricket-config if the oid exist? Here is what I believe is the relevant entries from the GetDeviceData.log: Jul 06 13:45:17 2005 uio-gw9-l0_00 OID_TESTER-6-DO_TEST Starting test for netbox: uio-gw9-l0 (cat356048G(30)), snmpoid: tempInlet Jul 06 13:45:17 2005 uio-gw9-l0_00 OID_TESTER-6-DO_TEST Got results from uio-gw9-l0, length: 1 (reqGetnext: true, vl: ) Jul 06 13:45:17 2005 uio-gw9-l0_00 OID_TESTER-6-DO_TEST Match: null, val: 1 snmpget'ing the oid from the box also fails. As short term solution I've removed tempInlet from the database DELETE FROM snmpoid WHERE oidkey='tempInlet'; and removed and added the box. -- Lars H?kedal larsha(a)usit.uio.no

2 1

[Nav-users]
by stian.soiland＠ntnu.no 09 Jul '05

09 Jul '05

On 2005-07-08 16:35:30, Aditya Rajgarhia wrote: > Thanks for the reply. I'm using NAV 3.0 rc1, and the solution which you > wrote for the old one is not valid because that line isn't there in the > new NAV. Weird thing we haven't discovered this bug on our own.. This might be a guess, but try editing the file /usr/local/nav/lib/python/nav/web/__init__.py Now cut out the line "import nav.web.auth" and paste it again inside "def headerparserhandler" right above the line "import state". Make sure the lines are all indented the same way. ie: def headerparserhandler(req): (..) import nav.web.auth import state from mod_python import apache Please tell us if this fixed the problem. -- Stian S?iland ITEA systemdrift, NTNU - det skapende universitet orakel(a)ntnu.no Tlf: 735 91500 =/\=

2 2

by arajgarh＠iwu.edu 07 Jul '05

07 Jul '05

i sent an email on the mailing list yesterday with an error. Seems someone has had the error before, but it's in Norweigan. Can anyone help or translate? http://desperados.itea.ntnu.no/pipermail/nav-users/2004-May.txt The error is the following: *** Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler nav.web.auth.authenticate(req) AttributeError: 'module' object has no attribute 'authenticate' *** Thanks, Aditya Assistant System Administrator Illinois Wesleyan University >From tlan at itea.ntnu.no Fri Jul 8 09:12:33 2005 From: tlan at itea.ntnu.no (Thomas =?iso-8859-1?Q?Lang=E5s?=) Date: Fri Jul 8 08:12:41 2005 Subject: [Nav-users] In-Reply-To: <7815918.1120765731058.JavaMail.arajgarh(a)iwu.edu> References: <7815918.1120765731058.JavaMail.arajgarh(a)iwu.edu> Message-ID: <20050708061233.GA8049(a)stud.ntnu.no> Aditya Rajgarhia: > i sent an email on the mailing list yesterday with an error. Seems > someone has had the error before, but it's in Norweigan. Can anyone > help or translate? > > http://desperados.itea.ntnu.no/pipermail/nav-users/2004-May.txt > > The error is the following: > *** > > Mod_python error: "PythonHeaderParserHandler nav.web" > > Traceback (most recent call last): > > File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line > 299, in HandlerDispatch > result = object(req) > > File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in > headerparserhandler > nav.web.auth.authenticate(req) > > AttributeError: 'module' object has no attribute 'authenticate' > *** Which version of nav are you using? There's one fix to such an error-message, but that's related to an old version of NAV (afaik). Which you found parts of the mailinglist-thread for, here's the mentioned solution in that thread: Open /usr/local/nav/lib/python/nav/web/auth.py in an editor and remove the line that says: from nav import users -- Thomas >From werner at skolelinux.no Fri Jul 8 09:22:35 2005 From: werner at skolelinux.no (Morten Werner Olsen) Date: Fri Jul 8 08:22:44 2005 Subject: [Nav-users] traffic map / configuring vlan In-Reply-To: <42CD78FD.8050903(a)ll.mit.edu> References: <42CD629E.9080307(a)ll.mit.edu> <b4c110fd0507071053c561cf5(a)mail.gmail.com> <42CD6F87.4090000(a)ll.mit.edu> <b4c110fd05070711224abf8139(a)mail.gmail.com> <42CD78FD.8050903(a)ll.mit.edu> Message-ID: <20050708062235.GD9990(a)debra.uio.no> On Thu, Jul 07, 2005 at 02:48:29PM -0400, Elizabeth Bodine wrote: > I believe I have found the error - getDeviceData.log says: > > /usr/lib/nav/getDeviceData.sh: line 48: > /usr/lib/j2sdk1.4-sun/jre/bin/java: No such file or directory > > The actual path needed is /usr/lib/j2sdk1.4/.... Is there a variable I > can set and/or a file I can change to reflect the actual path, or should > I just add a symbolic link? How have you installed Java? If you follow the instructions in README.Debian following the Debian package, Java is installed in /usr/lib/j2sdk1.4-sun/.. so if you've installed Java another way, a symlink might be just ok. :) - Werner >From arajgarh at iwu.edu Fri Jul 8 10:35:30 2005 From: arajgarh at iwu.edu (Aditya Rajgarhia) Date: Fri Jul 8 16:35:44 2005 Subject: [Nav-users] Message-ID: <2095394.1120833330918.JavaMail.arajgarh(a)iwu.edu> Thanks for the reply. I'm using NAV 3.0 rc1, and the solution which you wrote for the old one is not valid because that line isn't there in the new NAV. Any other ideas? I don't know why its giving this error, in the python I can import the module nav.web.auth. However I cannot import nav.web.auth.authenticate, it says that the module doesn't exist. How to fix? Thanks Aditya ---------- Thomas Lang?s wrote: >Aditya Rajgarhia: >> i sent an email on the mailing list yesterday with an error. Seems >> someone has had the error before, but it's in Norweigan. Can anyone >> help or translate? >> >> http://desperados.itea.ntnu.no/pipermail/nav-users/2004-May.txt >> >> The error is the following: >> *** >> >> Mod_python error: "PythonHeaderParserHandler nav.web" >> >> Traceback (most recent call last): >> >> File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line >> 299, in HandlerDispatch >> result = object(req) >> >> File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in >> headerparserhandler >> nav.web.auth.authenticate(req) >> >> AttributeError: 'module' object has no attribute 'authenticate' >> *** > >Which version of nav are you using? There's one fix to such an >error-message, but that's related to an old version of NAV (afaik). >Which you found parts of the mailinglist-thread for, here's the >mentioned solution in that thread: > >Open /usr/local/nav/lib/python/nav/web/auth.py in an editor and remove >the line that says: >from nav import users > > >-- >Thomas >

1 0

traffic map / configuring vlan
by kreide＠gmail.com 07 Jul '05

07 Jul '05

> I've just installed nav using the debian package for sarge... I've been > adding routers manually using the web interface (and adding them to the > _top container), but they are not showing up in the traffic map. I Routers will only show up in the traffic map once the links between them have been discovered. This process should be automatic with no extra configuration required as long as the NAV background processes are running (the getDeviceData process does the actual data collection). If you go to the 'Report' tool and select the 'Prefix' report, are your VLANs listed? Links between routers should be of nettype 'link' and the number of router ports ('antgw' column) should be 2. -- Kristian

2 4

PythonHandler
by arajgarh＠iwu.edu 07 Jul '05

07 Jul '05

When I try to access the apache2 server on my machine, I get this error message: ----------------------------------------------------------- Mod_python error: "PythonHeaderParserHandler nav.web" Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/mod_python/apache.py", line 299, in HandlerDispatch result = object(req) File "/usr/local/nav/lib/python/nav/web/__init__.py", line 55, in headerparserhandler nav.web.auth.authenticate(req) AttributeError: 'module' object has no attribute 'authenticate' ----------------------------------------------------------- I'm using Gentoo Linux. Mod_Python is installed and apache2 has been told to load it. Thanks, Aditya Rajgarhia --- Assistant System Administrator Illinois Wesleyan University arajgarh(a)iwu.edu >From ebodine at ll.mit.edu Thu Jul 7 14:13:02 2005 From: ebodine at ll.mit.edu (Elizabeth Bodine) Date: Thu Jul 7 19:18:05 2005 Subject: [Nav-users] traffic map / configuring vlan Message-ID: <42CD629E.9080307(a)ll.mit.edu> Hi- I've just installed nav using the debian package for sarge... I've been adding routers manually using the web interface (and adding them to the _top container), but they are not showing up in the traffic map. I think that it may be that my vlan is not configured right in nav (since I haven't done any config for it), but I haven't found any instructions on how to do that, and the web interface says that it cannot be configured manually. Is there a config file that I can change so that nav will show my network in the traffic map? Thanks! -- Elizabeth Bodine Massachusetts Institute of Technology Lincoln Laboratory 244 Wood St. Lexington, MA 02420 ebodine(a)ll.mit.edu 781-981-0780

1 0

Re: Python encoding problem
by stian.soiland＠ntnu.no 06 Jul '05

06 Jul '05

On 2005-07-06 19:48:22, Stian S?iland wrote: > Which UNIX distribution and Python distribution/version are you using? Also try this: : stain@ozelot ~;python Python 2.2.2 (#1, Feb 24 2003, 19:13:11) [GCC 3.2.2 20030222 (Red Hat Linux 3.2.2-4)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import encodings >>> encodings.search_function("iso8859-1") (<built-in function latin_1_encode>, <built-in function latin_1_decode>, <class encodings.latin_1.StreamReader at 0x8134a1c>, <class encodings.latin_1.StreamWriter at 0x8134d64>) -- Stian S?iland ITEA systemdrift, NTNU - det skapende universitet orakel(a)ntnu.no Tlf: 735 91500 =/\=

1 0

Python encoding problem
by arajgarh＠iwu.edu 06 Jul '05

06 Jul '05

I installed and configured everything. When I run "/usr/local/nav/bin/nav start" it compains about the encoding on line 2 of the file. /SyntaxError: no codec search functions registered: can't find encoding" /Any help will be appreciated. Thanks, Aditya Rajgarhia Assistant System Administrator Illinois Wesleyan University arajgarh(a)iwu.edu >From stian.soiland at ntnu.no Wed Jul 6 20:48:22 2005 From: stian.soiland at ntnu.no (Stian =?iso-8859-1?Q?S=F8iland?=) Date: Wed Jul 6 19:48:24 2005 Subject: [Nav-users] Re: Python encoding problem In-Reply-To: <42CC190D.2050202(a)iwu.edu> References: <42CC190D.2050202(a)iwu.edu> Message-ID: <20050706174822.GQ12095(a)itea.ntnu.no> On 2005-07-06 19:46:53, Aditya Rajgarhia wrote: > I installed and configured everything. When I run > "/usr/local/nav/bin/nav start" it compains about the encoding on line 2 > of the file. > > /SyntaxError: no codec search functions registered: can't find encoding" Which UNIX distribution and Python distribution/version are you using? -- Stian S?iland ITEA systemdrift, NTNU - det skapende universitet orakel(a)ntnu.no Tlf: 735 91500 =/\=

1 0

SV: Re: [Nav-users] Comments on the installation-guide nav 3 on SuSELinux Enterprise Server 9
by peder.sefland＠hivolda.no 29 Jun '05

29 Jun '05

The package gpg-pubkey-b481ca4d listed in the installation-guide is not part of the SLES9. I think the package that is ment is the "suse-build-key". But my problem now is that I have a nav3rc1 running on SLES, and everything "seems" to be running except web-interface and Alertengine. I have used the SuSE rpm package. And is trying to find whats wrong with the apache-config. I have tried to look at the http://svn.nav.ntnu.no/nav/navme/trunk/doc/apache/httpd2.conf.example But the apache-structer is totaly different from my debian-nav3-beta10 installation. Anyone have a suggestion where to start? /usr/local/nav/bin/nav status networkDiscovery: Up cricket: Up eventEngine (pid 6435) is running... iptrace: Up backup: Up servicemon.py (pid 6467) is running... smsd.pl (pid 6491) is running... thresholdMon: Up mactrace: Up logengine: Up safe_smsd: Up Alertengine is not running. maintengine: Up pping.py (pid 6520) is running... getDeviceData (pid 6546) is running... Peder Sefland >>> Morten Vold <morten.vold(a)ntnu.no> 23.06.05 13:04 >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 23/06/2005 11:42, Peder Magne Sefland uttered: > But a search on google show me that SuSE Linux Professional 9.3 has > this package. Has this document been writen based on Professional 9.3 > or SLES9 ? The document was originally written for SLES9, but I see Tristan Rhodes has edited the page since then - specifically he altered the part about manually installing Perl-DBD-Pg into installing it from Yast [1] I haven't confirmed that his changes were valid, but if the perl-DBD-Pg package really isn't part of standard SLES9, then that part of his page change should be reverted. > Can I use the Professional 9.3 perl-DBD-Pg-rpm on my SLES9? Don't know, you'll have to try it and see for yourself. [1] http://metanav.ntnu.no/moin.cgi/InstallingOnSLES?action=diff&date2=11120295… - -- Morten Vold NTNU ITEA Integrasjonsgruppen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCupctXxIl0kpcOkQRAkxiAKCoAamAnba/1EX6zGwoXgw3qs8dcgCeJqtI U/tpIv9paEGj/k2YEPfYC/0= =ij+U -----END PGP SIGNATURE-----

2 1

Added installation guide for NAV3 RC1 on Red Hat Enterprise Linux 4
by roger.aas＠hsh.no 28 Jun '05

28 Jun '05

I have added a step-by-step installation guide for NAV3 RC1 on Red Hat Enterprise Linux 4 on the MetaNAV Wiki. You can find it here: http://metanav.ntnu.no/moin.cgi/InstallingOnRHEL4 Please give me feedback when you find errors or omissions so I can fix them. Or if you just want to comment it... :-) I hope this can be of help for someone. Regards, Roger -- Roger Aas Stord/Haugesund College

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Nav-users